[PATCH] Convert x86-64 to early param

Instead of hackish manual parsing

Requires earlier i386 patchkit, but also fixes i386 early_printk again.

I removed some obsolete really early parameters which didn't do anything useful.
Also made a few parameters that needed it early (mostly oops printing setup)

Also removed one panic check that wasn't visible without
early console anyways (the early console is now initialized after that
panic)

This cleans up a lot of code.

Signed-off-by: Andi Kleen <ak@suse.de>

1 files changed, 18 insertions, 179 deletions

diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 73f1cdd140f..f55540a6084 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -76,11 +76,6 @@ unsigned long mmu_cr4_features;
 
 int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
-#ifdef	CONFIG_ACPI
-extern int __initdata acpi_ht;
-extern acpi_interrupt_flags	acpi_sci_flags;
-int __initdata acpi_force = 0;
-#endif
 
 int acpi_numa __initdata;
 
@@ -276,183 +271,22 @@ static void __init probe_roms(void)
 	}
 }
 
-/* Check for full argument with no trailing characters */
-static int fullarg(char *p, char *arg)
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
 {
-	int l = strlen(arg);
-	return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l]));
+	char *end;
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
 }
-
-static __init void parse_cmdline_early (char ** cmdline_p)
-{
-	char c = ' ', *to = command_line, *from = COMMAND_LINE;
-	int len = 0;
-	int userdef = 0;
-
-	for (;;) {
-		if (c != ' ') 
-			goto next_char; 
-
-#ifdef  CONFIG_SMP
-		/*
-		 * If the BIOS enumerates physical processors before logical,
-		 * maxcpus=N at enumeration-time can be used to disable HT.
-		 */
-		else if (!memcmp(from, "maxcpus=", 8)) {
-			extern unsigned int maxcpus;
-
-			maxcpus = simple_strtoul(from + 8, NULL, 0);
-		}
-#endif
-#ifdef CONFIG_ACPI
-		/* "acpi=off" disables both ACPI table parsing and interpreter init */
-		if (fullarg(from,"acpi=off"))
-			disable_acpi();
-
-		if (fullarg(from, "acpi=force")) { 
-			/* add later when we do DMI horrors: */
-			acpi_force = 1;
-			acpi_disabled = 0;
-		}
-
-		/* acpi=ht just means: do ACPI MADT parsing 
-		   at bootup, but don't enable the full ACPI interpreter */
-		if (fullarg(from, "acpi=ht")) { 
-			if (!acpi_force)
-				disable_acpi();
-			acpi_ht = 1; 
-		}
-                else if (fullarg(from, "pci=noacpi")) 
-			acpi_disable_pci();
-		else if (fullarg(from, "acpi=noirq"))
-			acpi_noirq_set();
-
-		else if (fullarg(from, "acpi_sci=edge"))
-			acpi_sci_flags.trigger =  1;
-		else if (fullarg(from, "acpi_sci=level"))
-			acpi_sci_flags.trigger = 3;
-		else if (fullarg(from, "acpi_sci=high"))
-			acpi_sci_flags.polarity = 1;
-		else if (fullarg(from, "acpi_sci=low"))
-			acpi_sci_flags.polarity = 3;
-
-		/* acpi=strict disables out-of-spec workarounds */
-		else if (fullarg(from, "acpi=strict")) {
-			acpi_strict = 1;
-		}
-		else if (fullarg(from, "acpi_skip_timer_override"))
-			acpi_skip_timer_override = 1;
+early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
-		if (fullarg(from, "disable_timer_pin_1"))
-			disable_timer_pin_1 = 1;
-		if (fullarg(from, "enable_timer_pin_1"))
-			disable_timer_pin_1 = -1;
-
-		if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) {
-			clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-			disable_apic = 1;
-		}
-
-		if (fullarg(from, "noapic"))
-			skip_ioapic_setup = 1;
-
-		if (fullarg(from,"apic")) {
-			skip_ioapic_setup = 0;
-			ioapic_force = 1;
-		}
-			
-		if (!memcmp(from, "mem=", 4))
-			parse_memopt(from+4, &from); 
-
-		if (!memcmp(from, "memmap=", 7)) {
-			/* exactmap option is for used defined memory */
-			if (!memcmp(from+7, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
-				/* If we are doing a crash dump, we
-				 * still need to know the real mem
-				 * size before original memory map is
-				 * reset.
-				 */
-				saved_max_pfn = e820_end_of_ram();
-#endif
-				from += 8+7;
-				end_pfn_map = 0;
-				e820.nr_map = 0;
-				userdef = 1;
-			}
-			else {
-				parse_memmapopt(from+7, &from);
-				userdef = 1;
-			}
-		}
-
-#ifdef CONFIG_NUMA
-		if (!memcmp(from, "numa=", 5))
-			numa_setup(from+5); 
-#endif
-
-		if (!memcmp(from,"iommu=",6)) { 
-			iommu_setup(from+6); 
-		}
-
-		if (fullarg(from,"oops=panic"))
-			panic_on_oops = 1;
-
-		if (!memcmp(from, "noexec=", 7))
-			nonx_setup(from + 7);
-
-#ifdef CONFIG_KEXEC
-		/* crashkernel=size@addr specifies the location to reserve for
-		 * a crash kernel.  By reserving this memory we guarantee
-		 * that linux never set's it up as a DMA target.
-		 * Useful for holding code to do something appropriate
-		 * after a kernel panic.
-		 */
-		else if (!memcmp(from, "crashkernel=", 12)) {
-			unsigned long size, base;
-			size = memparse(from+12, &from);
-			if (*from == '@') {
-				base = memparse(from+1, &from);
-				/* FIXME: Do I want a sanity check
-				 * to validate the memory range?
-				 */
-				crashk_res.start = base;
-				crashk_res.end   = base + size - 1;
-			}
-		}
-#endif
-
-#ifdef CONFIG_PROC_VMCORE
-		/* elfcorehdr= specifies the location of elf core header
-		 * stored by the crashed kernel. This option will be passed
-		 * by kexec loader to the capture kernel.
-		 */
-		else if(!memcmp(from, "elfcorehdr=", 11))
-			elfcorehdr_addr = memparse(from+11, &from);
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-		else if (!memcmp(from, "additional_cpus=", 16))
-			setup_additional_cpus(from+16);
-#endif
-
-	next_char:
-		c = *(from++);
-		if (!c)
-			break;
-		if (COMMAND_LINE_SIZE <= ++len)
-			break;
-		*(to++) = c;
-	}
-	if (userdef) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		e820_print_map("user");
-	}
-	*to = '\0';
-	*cmdline_p = command_line;
-}
-
 #ifndef CONFIG_NUMA
 static void __init
 contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
@@ -547,7 +381,12 @@ void __init setup_arch(char **cmdline_p)
 
 	early_identify_cpu(&boot_cpu_data);
 
-	parse_cmdline_early(cmdline_p);
+	strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
+	finish_e820_parsing();
 
 	/*
 	 * partially used pages are not usable - thus