Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1262 insertions, 0 deletions

diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
new file mode 100644
index 00000000000..3bafe438fa7
--- /dev/null
+++ b/arch/x86_64/kernel/time.c
@@ -0,0 +1,1262 @@
+/*
+ *  linux/arch/x86-64/kernel/time.c
+ *
+ *  "High Precision Event Timer" based timekeeping.
+ *
+ *  Copyright (c) 1991,1992,1995  Linus Torvalds
+ *  Copyright (c) 1994  Alan Modra
+ *  Copyright (c) 1995  Markus Kuhn
+ *  Copyright (c) 1996  Ingo Molnar
+ *  Copyright (c) 1998  Andrea Arcangeli
+ *  Copyright (c) 2002  Vojtech Pavlik
+ *  Copyright (c) 2003  Andi Kleen
+ *  RTC support code taken from arch/i386/kernel/timers/time_hpet.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/bcd.h>
+#include <linux/kallsyms.h>
+#include <asm/8253pit.h>
+#include <asm/pgtable.h>
+#include <asm/vsyscall.h>
+#include <asm/timex.h>
+#include <asm/proto.h>
+#include <asm/hpet.h>
+#include <asm/sections.h>
+#include <linux/cpufreq.h>
+#include <linux/hpet.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/apic.h>
+#endif
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+#ifdef CONFIG_CPU_FREQ
+static void cpufreq_delayed_get(void);
+#endif
+extern void i8254_timer_resume(void);
+extern int using_apic_timer;
+
+DEFINE_SPINLOCK(rtc_lock);
+DEFINE_SPINLOCK(i8253_lock);
+
+static int nohpet __initdata = 0;
+static int notsc __initdata = 0;
+
+#undef HPET_HACK_ENABLE_DANGEROUS
+
+unsigned int cpu_khz;					/* TSC clocks / usec, not used here */
+static unsigned long hpet_period;			/* fsecs / HPET clock */
+unsigned long hpet_tick;				/* HPET clocks / interrupt */
+unsigned long vxtime_hz = PIT_TICK_RATE;
+int report_lost_ticks;				/* command line option */
+unsigned long long monotonic_base;
+
+struct vxtime_data __vxtime __section_vxtime;	/* for vsyscalls */
+
+volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
+unsigned long __wall_jiffies __section_wall_jiffies = INITIAL_JIFFIES;
+struct timespec __xtime __section_xtime;
+struct timezone __sys_tz __section_sys_tz;
+
+static inline void rdtscll_sync(unsigned long *tsc)
+{
+#ifdef CONFIG_SMP
+	sync_core();
+#endif
+	rdtscll(*tsc);
+}
+
+/*
+ * do_gettimeoffset() returns microseconds since last timer interrupt was
+ * triggered by hardware. A memory read of HPET is slower than a register read
+ * of TSC, but much more reliable. It's also synchronized to the timer
+ * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a
+ * timer interrupt has happened already, but vxtime.trigger wasn't updated yet.
+ * This is not a problem, because jiffies hasn't updated either. They are bound
+ * together by xtime_lock.
+ */
+
+static inline unsigned int do_gettimeoffset_tsc(void)
+{
+	unsigned long t;
+	unsigned long x;
+	rdtscll_sync(&t);
+	if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */
+	x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32;
+	return x;
+}
+
+static inline unsigned int do_gettimeoffset_hpet(void)
+{
+	return ((hpet_readl(HPET_COUNTER) - vxtime.last) * vxtime.quot) >> 32;
+}
+
+unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc;
+
+/*
+ * This version of gettimeofday() has microsecond resolution and better than
+ * microsecond precision, as we're using at least a 10 MHz (usually 14.31818
+ * MHz) HPET timer.
+ */
+
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long seq, t;
+ 	unsigned int sec, usec;
+
+	do {
+		seq = read_seqbegin(&xtime_lock);
+
+		sec = xtime.tv_sec;
+		usec = xtime.tv_nsec / 1000;
+
+		/* i386 does some correction here to keep the clock 
+		   monotonous even when ntpd is fixing drift.
+		   But they didn't work for me, there is a non monotonic
+		   clock anyways with ntp.
+		   I dropped all corrections now until a real solution can
+		   be found. Note when you fix it here you need to do the same
+		   in arch/x86_64/kernel/vsyscall.c and export all needed
+		   variables in vmlinux.lds. -AK */ 
+
+		t = (jiffies - wall_jiffies) * (1000000L / HZ) +
+			do_gettimeoffset();
+		usec += t;
+
+	} while (read_seqretry(&xtime_lock, seq));
+
+	tv->tv_sec = sec + usec / 1000000;
+	tv->tv_usec = usec % 1000000;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+/*
+ * settimeofday() first undoes the correction that gettimeofday would do
+ * on the time, and then saves it. This is ugly, but has been like this for
+ * ages already.
+ */
+
+int do_settimeofday(struct timespec *tv)
+{
+	time_t wtm_sec, sec = tv->tv_sec;
+	long wtm_nsec, nsec = tv->tv_nsec;
+
+	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+		return -EINVAL;
+
+	write_seqlock_irq(&xtime_lock);
+
+	nsec -= do_gettimeoffset() * 1000 +
+		(jiffies - wall_jiffies) * (NSEC_PER_SEC/HZ);
+
+	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+	set_normalized_timespec(&xtime, sec, nsec);
+	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+	time_adjust = 0;		/* stop active adjtime() */
+	time_status |= STA_UNSYNC;
+	time_maxerror = NTP_PHASE_LIMIT;
+	time_esterror = NTP_PHASE_LIMIT;
+
+	write_sequnlock_irq(&xtime_lock);
+	clock_was_set();
+	return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	/* Assume the lock function has either no stack frame or only a single word.
+	   This checks if the address on the stack looks like a kernel text address.
+	   There is a small window for false hits, but in that case the tick
+	   is just accounted to the spinlock function.
+	   Better would be to write these functions in assembler again
+	   and check exactly. */
+	if (in_lock_functions(pc)) {
+		char *v = *(char **)regs->rsp;
+		if ((v >= _stext && v <= _etext) ||
+			(v >= _sinittext && v <= _einittext) ||
+			(v >= (char *)MODULES_VADDR  && v <= (char *)MODULES_END))
+			return (unsigned long)v;
+		return ((unsigned long *)regs->rsp)[1];
+	}
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
+ * ms after the second nowtime has started, because when nowtime is written
+ * into the registers of the CMOS clock, it will jump to the next second
+ * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
+ * sheet for details.
+ */
+
+static void set_rtc_mmss(unsigned long nowtime)
+{
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char control, freq_select;
+
+/*
+ * IRQs are disabled when we're called from the timer interrupt,
+ * no need for spin_lock_irqsave()
+ */
+
+	spin_lock(&rtc_lock);
+
+/*
+ * Tell the clock it's being set and stop it.
+ */
+
+	control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
+
+	freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+		BCD_TO_BIN(cmos_minutes);
+
+/*
+ * since we're only adjusting minutes and seconds, don't interfere with hour
+ * overflow. This avoids messing with unknown time zones but requires your RTC
+ * not to be off by more than 15 minutes. Since we're calling it only when
+ * our clock is externally synchronized using NTP, this shouldn't be a problem.
+ */
+
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+#if 0
+	/* AMD 8111 is a really bad time keeper and hits this regularly. 
+	   It probably was an attempt to avoid screwing up DST, but ignore
+	   that for now. */	   
+	if (abs(real_minutes - cmos_minutes) >= 30) {
+		printk(KERN_WARNING "time.c: can't update CMOS clock "
+		       "from %d to %d\n", cmos_minutes, real_minutes);
+	} else
+#endif
+
+	{
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		CMOS_WRITE(real_seconds, RTC_SECONDS);
+		CMOS_WRITE(real_minutes, RTC_MINUTES);
+	}
+
+/*
+ * The following flags have to be released exactly in this order, otherwise the
+ * DS12887 (popular MC146818A clone with integrated battery and quartz) will
+ * not reset the oscillator and will not update precisely 500 ms later. You
+ * won't find this mentioned in the Dallas Semiconductor data sheets, but who
+ * believes data sheets anyway ... -- Markus Kuhn
+ */
+
+	CMOS_WRITE(control, RTC_CONTROL);
+	CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
+
+	spin_unlock(&rtc_lock);
+}
+
+
+/* monotonic_clock(): returns # of nanoseconds passed since time_init()
+ *		Note: This function is required to return accurate
+ *		time even in the absence of multiple timer ticks.
+ */
+unsigned long long monotonic_clock(void)
+{
+	unsigned long seq;
+ 	u32 last_offset, this_offset, offset;
+	unsigned long long base;
+
+	if (vxtime.mode == VXTIME_HPET) {
+		do {
+			seq = read_seqbegin(&xtime_lock);
+
+			last_offset = vxtime.last;
+			base = monotonic_base;
+			this_offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+
+		} while (read_seqretry(&xtime_lock, seq));
+		offset = (this_offset - last_offset);
+		offset *=(NSEC_PER_SEC/HZ)/hpet_tick;
+		return base + offset;
+	}else{
+		do {
+			seq = read_seqbegin(&xtime_lock);
+
+			last_offset = vxtime.last_tsc;
+			base = monotonic_base;
+		} while (read_seqretry(&xtime_lock, seq));
+		sync_core();
+		rdtscll(this_offset);
+		offset = (this_offset - last_offset)*1000/cpu_khz; 
+		return base + offset;
+	}
+
+
+}
+EXPORT_SYMBOL(monotonic_clock);
+
+static noinline void handle_lost_ticks(int lost, struct pt_regs *regs)
+{
+    static long lost_count;
+    static int warned;
+
+    if (report_lost_ticks) {
+	    printk(KERN_WARNING "time.c: Lost %d timer "
+		   "tick(s)! ", lost);
+	    print_symbol("rip %s)\n", regs->rip);
+    }
+
+    if (lost_count == 1000 && !warned) {
+	    printk(KERN_WARNING
+		   "warning: many lost ticks.\n"
+		   KERN_WARNING "Your time source seems to be instable or "
+		   		"some driver is hogging interupts\n");
+	    print_symbol("rip %s\n", regs->rip);
+	    if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
+		    printk(KERN_WARNING "Falling back to HPET\n");
+		    vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+		    vxtime.mode = VXTIME_HPET;
+		    do_gettimeoffset = do_gettimeoffset_hpet;
+	    }
+	    /* else should fall back to PIT, but code missing. */
+	    warned = 1;
+    } else
+	    lost_count++;
+
+#ifdef CONFIG_CPU_FREQ
+    /* In some cases the CPU can change frequency without us noticing
+       (like going into thermal throttle)
+       Give cpufreq a change to catch up. */
+    if ((lost_count+1) % 25 == 0) {
+	    cpufreq_delayed_get();
+    }
+#endif
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	static unsigned long rtc_update = 0;
+	unsigned long tsc;
+	int delay, offset = 0, lost = 0;
+
+/*
+ * Here we are in the timer irq handler. We have irqs locally disabled (so we
+ * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running
+ * on the other CPU, so we need a lock. We also need to lock the vsyscall
+ * variables, because both do_timer() and us change them -arca+vojtech
+ */
+
+	write_seqlock(&xtime_lock);
+
+	if (vxtime.hpet_address) {
+		offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+		delay = hpet_readl(HPET_COUNTER) - offset;
+	} else {
+		spin_lock(&i8253_lock);
+		outb_p(0x00, 0x43);
+		delay = inb_p(0x40);
+		delay |= inb(0x40) << 8;
+		spin_unlock(&i8253_lock);
+		delay = LATCH - 1 - delay;
+	}
+
+	rdtscll_sync(&tsc);
+
+	if (vxtime.mode == VXTIME_HPET) {
+		if (offset - vxtime.last > hpet_tick) {
+			lost = (offset - vxtime.last) / hpet_tick - 1;
+		}
+
+		monotonic_base += 
+			(offset - vxtime.last)*(NSEC_PER_SEC/HZ) / hpet_tick;
+
+		vxtime.last = offset;
+	} else {
+		offset = (((tsc - vxtime.last_tsc) *
+			   vxtime.tsc_quot) >> 32) - (USEC_PER_SEC / HZ);
+
+		if (offset < 0)
+			offset = 0;
+
+		if (offset > (USEC_PER_SEC / HZ)) {
+			lost = offset / (USEC_PER_SEC / HZ);
+			offset %= (USEC_PER_SEC / HZ);
+		}
+
+		monotonic_base += (tsc - vxtime.last_tsc)*1000000/cpu_khz ;
+
+		vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot;
+
+		if ((((tsc - vxtime.last_tsc) *
+		      vxtime.tsc_quot) >> 32) < offset)
+			vxtime.last_tsc = tsc -
+				(((long) offset << 32) / vxtime.tsc_quot) - 1;
+	}
+
+	if (lost > 0) {
+		handle_lost_ticks(lost, regs);
+		jiffies += lost;
+	}
+
+/*
+ * Do the timer stuff.
+ */
+
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the profiling,
+ * except when we simulate SMP mode on a uniprocessor system, in that case we
+ * have to call the local interrupt handler.
+ */
+
+#ifndef CONFIG_X86_LOCAL_APIC
+	profile_tick(CPU_PROFILING, regs);
+#else
+	if (!using_apic_timer)
+		smp_local_timer_interrupt(regs);
+#endif
+
+/*
+ * If we have an externally synchronized Linux clock, then update CMOS clock
+ * accordingly every ~11 minutes. set_rtc_mmss() will be called in the jiffy
+ * closest to exactly 500 ms before the next second. If the update fails, we
+ * don't care, as it'll be updated on the next turn, and the problem (time way
+ * off) isn't likely to go away much sooner anyway.
+ */
+
+	if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update &&
+		abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) {
+		set_rtc_mmss(xtime.tv_sec);
+		rtc_update = xtime.tv_sec + 660;
+	}
+ 
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long a = 0;
+
+#if 0
+	/* Don't do a HPET read here. Using TSC always is much faster
+	   and HPET may not be mapped yet when the scheduler first runs.
+           Disadvantage is a small drift between CPUs in some configurations,
+	   but that should be tolerable. */
+	if (__vxtime.mode == VXTIME_HPET)
+		return (hpet_readl(HPET_COUNTER) * vxtime.quot) >> 32;
+#endif
+
+	/* Could do CPU core sync here. Opteron can execute rdtsc speculatively,
+	   which means it is not completely exact and may not be monotonous between
+	   CPUs. But the errors should be too small to matter for scheduling
+	   purposes. */
+
+	rdtscll(a);
+	return cycles_2_ns(a);
+}
+
+unsigned long get_cmos_time(void)
+{
+	unsigned int timeout, year, mon, day, hour, min, sec;
+	unsigned char last, this;
+	unsigned long flags;
+
+/*
+ * The Linux interpretation of the CMOS clock register contents: When the
+ * Update-In-Progress (UIP) flag goes from 1 to 0, the RTC registers show the
+ * second which has precisely just started. Waiting for this can take up to 1
+ * second, we timeout approximately after 2.4 seconds on a machine with
+ * standard 8.3 MHz ISA bus.
+ */
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	timeout = 1000000;
+	last = this = 0;
+
+	while (timeout && last && !this) {
+		last = this;
+		this = CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP;
+		timeout--;
+	}
+
+/*
+ * Here we are safe to assume the registers won't change for a whole second, so
+ * we just go ahead and read them.
+	 */
+
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+/*
+ * We know that x86-64 always uses BCD format, no need to check the config
+ * register.
+ */
+
+	    BCD_TO_BIN(sec);
+	    BCD_TO_BIN(min);
+	    BCD_TO_BIN(hour);
+	    BCD_TO_BIN(day);
+	    BCD_TO_BIN(mon);
+	    BCD_TO_BIN(year);
+
+/*
+ * x86-64 systems only exists since 2002.
+ * This will work up to Dec 31, 2100
+ */
+	year += 2000;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
+   changes.
+   
+   RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
+   not that important because current Opteron setups do not support
+   scaling on SMP anyroads.
+
+   Should fix up last_tsc too. Currently gettimeofday in the
+   first tick after the change will be slightly wrong. */
+
+#include <linux/workqueue.h>
+
+static unsigned int cpufreq_delayed_issched = 0;
+static unsigned int cpufreq_init = 0;
+static struct work_struct cpufreq_delayed_get_work;
+
+static void handle_cpufreq_delayed_get(void *v)
+{
+	unsigned int cpu;
+	for_each_online_cpu(cpu) {
+		cpufreq_get(cpu);
+	}
+	cpufreq_delayed_issched = 0;
+}
+
+/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
+ * to verify the CPU frequency the timing core thinks the CPU is running
+ * at is still correct.
+ */
+static void cpufreq_delayed_get(void)
+{
+	static int warned;
+	if (cpufreq_init && !cpufreq_delayed_issched) {
+		cpufreq_delayed_issched = 1;
+		if (!warned) {
+			warned = 1;
+			printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+		}
+		schedule_work(&cpufreq_delayed_get_work);
+	}
+}
+
+static unsigned int  ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+
+static unsigned long cpu_khz_ref = 0;
+
+static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+				 void *data)
+{
+        struct cpufreq_freqs *freq = data;
+	unsigned long *lpj, dummy;
+
+	lpj = &dummy;
+	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+#ifdef CONFIG_SMP
+	lpj = &cpu_data[freq->cpu].loops_per_jiffy;
+#else
+	lpj = &boot_cpu_data.loops_per_jiffy;
+#endif
+
+
+
+	if (!ref_freq) {
+		ref_freq = freq->old;
+		loops_per_jiffy_ref = *lpj;
+		cpu_khz_ref = cpu_khz;
+	}
+        if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+            (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+	    (val == CPUFREQ_RESUMECHANGE)) {
+                *lpj =
+		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+
+		cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+			vxtime.tsc_quot = (1000L << 32) / cpu_khz;
+	}
+	
+	set_cyc2ns_scale(cpu_khz_ref / 1000);
+
+	return 0;
+}
+ 
+static struct notifier_block time_cpufreq_notifier_block = {
+         .notifier_call  = time_cpufreq_notifier
+};
+
+static int __init cpufreq_tsc(void)
+{
+	INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+	if (!cpufreq_register_notifier(&time_cpufreq_notifier_block,
+				       CPUFREQ_TRANSITION_NOTIFIER))
+		cpufreq_init = 1;
+	return 0;
+}
+
+core_initcall(cpufreq_tsc);
+
+#endif
+
+/*
+ * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing
+ * it to the HPET timer of known frequency.
+ */
+
+#define TICK_COUNT 100000000
+
+static unsigned int __init hpet_calibrate_tsc(void)
+{
+	int tsc_start, hpet_start;
+	int tsc_now, hpet_now;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	hpet_start = hpet_readl(HPET_COUNTER);
+	rdtscl(tsc_start);
+
+	do {
+		local_irq_disable();
+		hpet_now = hpet_readl(HPET_COUNTER);
+		sync_core();
+		rdtscl(tsc_now);
+		local_irq_restore(flags);
+	} while ((tsc_now - tsc_start) < TICK_COUNT &&
+		 (hpet_now - hpet_start) < TICK_COUNT);
+
+	return (tsc_now - tsc_start) * 1000000000L
+		/ ((hpet_now - hpet_start) * hpet_period / 1000);
+}
+
+
+/*
+ * pit_calibrate_tsc() uses the speaker output (channel 2) of
+ * the PIT. This is better than using the timer interrupt output,
+ * because we can read the value of the speaker with just one inb(),
+ * where we need three i/o operations for the interrupt channel.
+ * We count how many ticks the TSC does in 50 ms.
+ */
+
+static unsigned int __init pit_calibrate_tsc(void)
+{
+	unsigned long start, end;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	outb(0xb0, 0x43);
+	outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+	outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+	rdtscll(start);
+	sync_core();
+	while ((inb(0x61) & 0x20) == 0);
+	sync_core();
+	rdtscll(end);
+
+	spin_unlock_irqrestore(&i8253_lock, flags);
+	
+	return (end - start) / 50;
+}
+
+#ifdef	CONFIG_HPET
+static __init int late_hpet_init(void)
+{
+	struct hpet_data	hd;
+	unsigned int 		ntimer;
+
+	if (!vxtime.hpet_address)
+          return -1;
+
+	memset(&hd, 0, sizeof (hd));
+
+	ntimer = hpet_readl(HPET_ID);
+	ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
+	ntimer++;
+
+	/*
+	 * Register with driver.
+	 * Timer0 and Timer1 is used by platform.
+	 */
+	hd.hd_phys_address = vxtime.hpet_address;
+	hd.hd_address = (void *)fix_to_virt(FIX_HPET_BASE);
+	hd.hd_nirqs = ntimer;
+	hd.hd_flags = HPET_DATA_PLATFORM;
+	hpet_reserve_timer(&hd, 0);
+#ifdef	CONFIG_HPET_EMULATE_RTC
+	hpet_reserve_timer(&hd, 1);
+#endif
+	hd.hd_irq[0] = HPET_LEGACY_8254;
+	hd.hd_irq[1] = HPET_LEGACY_RTC;
+	if (ntimer > 2) {
+		struct hpet		*hpet;
+		struct hpet_timer	*timer;
+		int			i;
+
+		hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE);
+
+		for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
+		     timer++, i++)
+			hd.hd_irq[i] = (timer->hpet_config &
+					Tn_INT_ROUTE_CNF_MASK) >>
+				Tn_INT_ROUTE_CNF_SHIFT;
+
+	}
+
+	hpet_alloc(&hd);
+	return 0;
+}
+fs_initcall(late_hpet_init);
+#endif
+
+static int hpet_timer_stop_set_go(unsigned long tick)
+{
+	unsigned int cfg;
+
+/*
+ * Stop the timers and reset the main counter.
+ */
+
+	cfg = hpet_readl(HPET_CFG);
+	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
+	hpet_writel(cfg, HPET_CFG);
+	hpet_writel(0, HPET_COUNTER);
+	hpet_writel(0, HPET_COUNTER + 4);
+
+/*
+ * Set up timer 0, as periodic with first interrupt to happen at hpet_tick,
+ * and period also hpet_tick.
+ */
+
+	hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
+		    HPET_TN_32BIT, HPET_T0_CFG);
+	hpet_writel(hpet_tick, HPET_T0_CMP);
+	hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */
+
+/*
+ * Go!
+ */
+
+	cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+	hpet_writel(cfg, HPET_CFG);
+
+	return 0;
+}
+
+static int hpet_init(void)
+{
+	unsigned int id;
+
+	if (!vxtime.hpet_address)
+		return -1;
+	set_fixmap_nocache(FIX_HPET_BASE, vxtime.hpet_address);
+	__set_fixmap(VSYSCALL_HPET, vxtime.hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
+
+/*
+ * Read the period, compute tick and quotient.
+ */
+
+	id = hpet_readl(HPET_ID);
+
+	if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER) ||
+	    !(id & HPET_ID_LEGSUP))
+		return -1;
+
+	hpet_period = hpet_readl(HPET_PERIOD);
+	if (hpet_period < 100000 || hpet_period > 100000000)
+		return -1;
+
+	hpet_tick = (1000000000L * (USEC_PER_SEC / HZ) + hpet_period / 2) /
+		hpet_period;
+
+	return hpet_timer_stop_set_go(hpet_tick);
+}
+
+static int hpet_reenable(void)
+{
+	return hpet_timer_stop_set_go(hpet_tick);
+}
+
+void __init pit_init(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8253_lock, flags);
+	outb_p(0x34, 0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb_p(LATCH & 0xff, 0x40);	/* LSB */
+	outb_p(LATCH >> 8, 0x40);	/* MSB */
+	spin_unlock_irqrestore(&i8253_lock, flags);
+}
+
+int __init time_setup(char *str)
+{
+	report_lost_ticks = 1;
+	return 1;
+}
+
+static struct irqaction irq0 = {
+	timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL
+};
+
+extern void __init config_acpi_tables(void);
+
+void __init time_init(void)
+{
+	char *timename;
+
+#ifdef HPET_HACK_ENABLE_DANGEROUS
+        if (!vxtime.hpet_address) {
+		printk(KERN_WARNING "time.c: WARNING: Enabling HPET base "
+		       "manually!\n");
+                outl(0x800038a0, 0xcf8);
+                outl(0xff000001, 0xcfc);
+                outl(0x800038a0, 0xcf8);
+                vxtime.hpet_address = inl(0xcfc) & 0xfffffffe;
+		printk(KERN_WARNING "time.c: WARNING: Enabled HPET "
+		       "at %#lx.\n", vxtime.hpet_address);
+        }
+#endif
+	if (nohpet)
+		vxtime.hpet_address = 0;
+
+	xtime.tv_sec = get_cmos_time();
+	xtime.tv_nsec = 0;
+
+	set_normalized_timespec(&wall_to_monotonic,
+	                        -xtime.tv_sec, -xtime.tv_nsec);
+
+	if (!hpet_init()) {
+                vxtime_hz = (1000000000000000L + hpet_period / 2) /
+			hpet_period;
+		cpu_khz = hpet_calibrate_tsc();
+		timename = "HPET";
+	} else {
+		pit_init();
+		cpu_khz = pit_calibrate_tsc();
+		timename = "PIT";
+	}
+
+	printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
+	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
+		cpu_khz / 1000, cpu_khz % 1000);
+	vxtime.mode = VXTIME_TSC;
+	vxtime.quot = (1000000L << 32) / vxtime_hz;
+	vxtime.tsc_quot = (1000L << 32) / cpu_khz;
+	vxtime.hz = vxtime_hz;
+	rdtscll_sync(&vxtime.last_tsc);
+	setup_irq(0, &irq0);
+
+	set_cyc2ns_scale(cpu_khz / 1000);
+}
+
+void __init time_init_smp(void)
+{
+	char *timetype;
+
+	/*
+	 * AMD systems with more than one CPU don't have fully synchronized
+	 * TSCs. Always use HPET gettimeofday for these, although it is slower.
+	 * Intel SMP systems usually have synchronized TSCs, so use always
+	 * the TSC.
+	 *
+	 * Exceptions:
+	 * IBM Summit2 checked by oem_force_hpet_timer().
+ 	 * AMD dual core may also not need HPET. Check me.
+	 *
+	 * Can be turned off with "notsc".
+	 */
+	if (num_online_cpus() > 1 &&
+	    boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+		notsc = 1;
+	/* Some systems will want to disable TSC and use HPET. */
+	if (oem_force_hpet_timer())
+		notsc = 1;
+	if (vxtime.hpet_address && notsc) {
+		timetype = "HPET";
+		vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+		vxtime.mode = VXTIME_HPET;
+		do_gettimeoffset = do_gettimeoffset_hpet;
+	} else {
+		timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC";
+		vxtime.mode = VXTIME_TSC;
+	}
+
+	printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+}
+
+__setup("report_lost_ticks", time_setup);
+
+static long clock_cmos_diff;
+static unsigned long sleep_start;
+
+static int timer_suspend(struct sys_device *dev, u32 state)
+{
+	/*
+	 * Estimate time zone so that set_time can update the clock
+	 */
+	long cmos_time =  get_cmos_time();
+
+	clock_cmos_diff = -cmos_time;
+	clock_cmos_diff += get_seconds();
+	sleep_start = cmos_time;
+	return 0;
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+	unsigned long flags;
+	unsigned long sec;
+	unsigned long ctime = get_cmos_time();
+	unsigned long sleep_length = (ctime - sleep_start) * HZ;
+
+	if (vxtime.hpet_address)
+		hpet_reenable();
+	else
+		i8254_timer_resume();
+
+	sec = ctime + clock_cmos_diff;
+	write_seqlock_irqsave(&xtime_lock,flags);
+	xtime.tv_sec = sec;
+	xtime.tv_nsec = 0;
+	write_sequnlock_irqrestore(&xtime_lock,flags);
+	jiffies += sleep_length;
+	wall_jiffies += sleep_length;
+	return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+	.resume = timer_resume,
+	.suspend = timer_suspend,
+	set_kset_name("timer"),
+};
+
+
+/* XXX this driverfs stuff should probably go elsewhere later -john */
+static struct sys_device device_timer = {
+	.id	= 0,
+	.cls	= &timer_sysclass,
+};
+
+static int time_init_device(void)
+{
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sysdev_register(&device_timer);
+	return error;
+}
+
+device_initcall(time_init_device);
+
+#ifdef CONFIG_HPET_EMULATE_RTC
+/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
+ * is enabled, we support RTC interrupt functionality in software.
+ * RTC has 3 kinds of interrupts:
+ * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
+ *    is updated
+ * 2) Alarm Interrupt - generate an interrupt at a specific time of day
+ * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
+ *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
+ * (1) and (2) above are implemented using polling at a frequency of
+ * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
+ * overhead. (DEFAULT_RTC_INT_FREQ)
+ * For (3), we use interrupts at 64Hz or user specified periodic
+ * frequency, whichever is higher.
+ */
+#include <linux/rtc.h>
+
+extern irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+#define DEFAULT_RTC_INT_FREQ 	64
+#define RTC_NUM_INTS 		1
+
+static unsigned long UIE_on;
+static unsigned long prev_update_sec;
+
+static unsigned long AIE_on;
+static struct rtc_time alarm_time;
+
+static unsigned long PIE_on;
+static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
+static unsigned long PIE_count;
+
+static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+
+int is_hpet_enabled(void)
+{
+	return vxtime.hpet_address != 0;
+}
+
+/*
+ * Timer 1 for RTC, we do not use periodic interrupt feature,
+ * even if HPET supports periodic interrupts on Timer 1.
+ * The reason being, to set up a periodic interrupt in HPET, we need to
+ * stop the main counter. And if we do that everytime someone diables/enables
+ * RTC, we will have adverse effect on main kernel timer running on Timer 0.
+ * So, for the time being, simulate the periodic interrupt in software.
+ *
+ * hpet_rtc_timer_init() is called for the first time and during subsequent
+ * interuppts reinit happens through hpet_rtc_timer_reinit().
+ */
+int hpet_rtc_timer_init(void)
+{
+	unsigned int cfg, cnt;
+	unsigned long flags;
+
+	if (!is_hpet_enabled())
+		return 0;
+	/*
+	 * Set the counter 1 and enable the interrupts.
+	 */
+	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+		hpet_rtc_int_freq = PIE_freq;
+	else
+		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+	local_irq_save(flags);
+	cnt = hpet_readl(HPET_COUNTER);
+	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
+	hpet_writel(cnt, HPET_T1_CMP);
+	local_irq_restore(flags);
+
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	hpet_writel(cfg, HPET_T1_CFG);
+
+	return 1;
+}
+
+static void hpet_rtc_timer_reinit(void)
+{
+	unsigned int cfg, cnt;
+
+	if (!(PIE_on | AIE_on | UIE_on))
+		return;
+
+	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
+		hpet_rtc_int_freq = PIE_freq;
+	else
+		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
+
+	/* It is more accurate to use the comparator value than current count.*/
+	cnt = hpet_readl(HPET_T1_CMP);
+	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
+	hpet_writel(cnt, HPET_T1_CMP);
+
+	cfg = hpet_readl(HPET_T1_CFG);
+	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	hpet_writel(cfg, HPET_T1_CFG);
+
+	return;
+}
+
+/*
+ * The functions below are called from rtc driver.
+ * Return 0 if HPET is not being used.
+ * Otherwise do the necessary changes and return 1.
+ */
+int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	if (bit_mask & RTC_UIE)
+		UIE_on = 0;
+	if (bit_mask & RTC_PIE)
+		PIE_on = 0;
+	if (bit_mask & RTC_AIE)
+		AIE_on = 0;
+
+	return 1;
+}
+
+int hpet_set_rtc_irq_bit(unsigned long bit_mask)
+{
+	int timer_init_reqd = 0;
+
+	if (!is_hpet_enabled())
+		return 0;
+
+	if (!(PIE_on | AIE_on | UIE_on))
+		timer_init_reqd = 1;
+
+	if (bit_mask & RTC_UIE) {
+		UIE_on = 1;
+	}
+	if (bit_mask & RTC_PIE) {
+		PIE_on = 1;
+		PIE_count = 0;
+	}
+	if (bit_mask & RTC_AIE) {
+		AIE_on = 1;
+	}
+
+	if (timer_init_reqd)
+		hpet_rtc_timer_init();
+
+	return 1;
+}
+
+int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	alarm_time.tm_hour = hrs;
+	alarm_time.tm_min = min;
+	alarm_time.tm_sec = sec;
+
+	return 1;
+}
+
+int hpet_set_periodic_freq(unsigned long freq)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	PIE_freq = freq;
+	PIE_count = 0;
+
+	return 1;
+}
+
+int hpet_rtc_dropped_irq(void)
+{
+	if (!is_hpet_enabled())
+		return 0;
+
+	return 1;
+}
+
+irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct rtc_time curr_time;
+	unsigned long rtc_int_flag = 0;
+	int call_rtc_interrupt = 0;
+
+	hpet_rtc_timer_reinit();
+
+	if (UIE_on | AIE_on) {
+		rtc_get_rtc_time(&curr_time);
+	}
+	if (UIE_on) {
+		if (curr_time.tm_sec != prev_update_sec) {
+			/* Set update int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag = RTC_UF;
+			prev_update_sec = curr_time.tm_sec;
+		}
+	}
+	if (PIE_on) {
+		PIE_count++;
+		if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
+			/* Set periodic int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag |= RTC_PF;
+			PIE_count = 0;
+		}
+	}
+	if (AIE_on) {
+		if ((curr_time.tm_sec == alarm_time.tm_sec) &&
+		    (curr_time.tm_min == alarm_time.tm_min) &&
+		    (curr_time.tm_hour == alarm_time.tm_hour)) {
+			/* Set alarm int info, call real rtc int routine */
+			call_rtc_interrupt = 1;
+			rtc_int_flag |= RTC_AF;
+		}
+	}
+	if (call_rtc_interrupt) {
+		rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
+		rtc_interrupt(rtc_int_flag, dev_id, regs);
+	}
+	return IRQ_HANDLED;
+}
+#endif
+
+
+
+static int __init nohpet_setup(char *s) 
+{ 
+	nohpet = 1;
+	return 0;
+} 
+
+__setup("nohpet", nohpet_setup);
+
+
+static int __init notsc_setup(char *s)
+{
+	notsc = 1;
+	return 0;
+}
+
+__setup("notsc", notsc_setup);
+
+