[PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64

i386 and x86-64 pci mmconfig code have a lot in common.  So share what's
shareable between the two.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

1 files changed, 12 insertions, 64 deletions

diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index faabb6e87f1..0847735bb31 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -19,9 +19,7 @@
 
 /* Verify the first 16 busses. We assume that systems with more busses
    get MCFG right. */
-#define MAX_CHECK_BUS 16
-
-static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
+#define PCI_MMCFG_MAX_CHECK_BUS 16
 
 /* Static virtual mapping of the MMCONFIG aperture */
 struct mmcfg_virt {
@@ -63,8 +61,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus)
 static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
 	char __iomem *addr;
-	if (seg == 0 && bus < MAX_CHECK_BUS &&
-		test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
+	if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
+		test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
 		return NULL;
 	addr = get_virt(seg, bus);
 	if (!addr)
@@ -135,63 +133,16 @@ static struct pci_raw_ops pci_mmcfg = {
 	.write =	pci_mmcfg_write,
 };
 
-/* K8 systems have some devices (typically in the builtin northbridge)
-   that are only accessible using type1
-   Normally this can be expressed in the MCFG by not listing them
-   and assigning suitable _SEGs, but this isn't implemented in some BIOS.
-   Instead try to discover all devices on bus 0 that are unreachable using MM
-   and fallback for them. */
-static __init void unreachable_devices(void)
-{
-	int i, k;
-	/* Use the max bus number from ACPI here? */
-	for (k = 0; k < MAX_CHECK_BUS; k++) {
-		for (i = 0; i < 32; i++) {
-			u32 val1;
-			char __iomem *addr;
-
-			pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
-			if (val1 == 0xffffffff)
-				continue;
-			addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
-			if (addr == NULL|| readl(addr) != val1) {
-				set_bit(i + 32*k, fallback_slots);
-				printk(KERN_NOTICE "PCI: No mmconfig possible"
-				       " on device %02x:%02x\n", k, i);
-			}
-		}
-	}
-}
-
-void __init pci_mmcfg_init(int type)
+int __init pci_mmcfg_arch_init(void)
 {
 	int i;
-
-	if ((pci_probe & PCI_PROBE_MMCONF) == 0)
-		return;
-
-	acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
-	if ((pci_mmcfg_config_num == 0) ||
-	    (pci_mmcfg_config == NULL) ||
-	    (pci_mmcfg_config[0].address == 0))
-		return;
-
-	/* Only do this check when type 1 works. If it doesn't work
-           assume we run on a Mac and always use MCFG */
-	if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
-			pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
-			E820_RESERVED)) {
-		printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
-				(unsigned long)pci_mmcfg_config[0].address);
-		printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
-		return;
-	}
-
-	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
+	pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+				 pci_mmcfg_config_num, GFP_KERNEL);
 	if (pci_mmcfg_virt == NULL) {
 		printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
-		return;
+		return 0;
 	}
+
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
 		pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
 		pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address,
@@ -200,14 +151,11 @@ void __init pci_mmcfg_init(int type)
 			printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
 					"segment %d\n",
 				pci_mmcfg_config[i].pci_segment);
-			return;
+			return 0;
 		}
-		printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n",
-			(unsigned long)pci_mmcfg_config[i].address);
+		printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n",
+				pci_mmcfg_config[i].address);
 	}
-
-	unreachable_devices();
-
 	raw_pci_ops = &pci_mmcfg;
-	pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
+	return 1;
 }