Merge branch 'linux-2.6'

67 files changed, 1818 insertions, 5515 deletions

diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 56eb14c9847..145bb824b2a 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -415,13 +415,13 @@ config OUT_OF_LINE_PFN_TO_PAGE
 	depends on DISCONTIGMEM
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-256)"
+	int "Maximum number of CPUs (2-255)"
 	range 2 255
 	depends on SMP
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support. Current maximum is 256 CPUs due to
+	  kernel will support. Current maximum is 255 CPUs due to
 	  APIC addressing limits. Less depending on the hardware.
 
 	  This is purely to save memory - each supported CPU requires
@@ -565,23 +565,56 @@ config CRASH_DUMP
 	  PHYSICAL_START.
           For more details see Documentation/kdump/kdump.txt
 
+config RELOCATABLE
+	bool "Build a relocatable kernel(EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Builds a relocatable kernel. This enables loading and running
+	  a kernel binary from a different physical address than it has
+	  been compiled for.
+
+	  One use is for the kexec on panic case where the recovery kernel
+	  must live at a different physical address than the primary
+	  kernel.
+
+	  Note: If CONFIG_RELOCATABLE=y, then kernel run from the address
+	  it has been loaded at and compile time physical address
+	  (CONFIG_PHYSICAL_START) is ignored.
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x1000000" if CRASH_DUMP
 	default "0x200000"
 	help
-	  This gives the physical address where the kernel is loaded. Normally
-	  for regular kernels this value is 0x200000 (2MB). But in the case
-	  of kexec on panic the fail safe kernel needs to run at a different
-	  address than the panic-ed kernel. This option is used to set the load
-	  address for kernels used to capture crash dump on being kexec'ed
-	  after panic. The default value for crash dump kernels is
-	  0x1000000 (16MB). This can also be set based on the "X" value as
+	  This gives the physical address where the kernel is loaded. It
+	  should be aligned to 2MB boundary.
+
+	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
+	  bzImage will decompress itself to above physical address and
+	  run from there. Otherwise, bzImage will run from the address where
+	  it has been loaded by the boot loader and will ignore above physical
+	  address.
+
+	  In normal kdump cases one does not have to set/change this option
+	  as now bzImage can be compiled as a completely relocatable image
+	  (CONFIG_RELOCATABLE=y) and be used to load and run from a different
+	  address. This option is mainly useful for the folks who don't want
+	  to use a bzImage for capturing the crash dump and want to use a
+	  vmlinux instead.
+
+	  So if you are using bzImage for capturing the crash dump, leave
+	  the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
+	  Otherwise if you plan to use vmlinux for capturing the crash dump
+	  change this value to start of the reserved region (Typically 16MB
+	  0x1000000). In other words, it can be set based on the "X" value as
 	  specified in the "crashkernel=YM@XM" command line boot parameter
 	  passed to the panic-ed kernel. Typically this parameter is set as
 	  crashkernel=64M@16M. Please take a look at
 	  Documentation/kdump/kdump.txt for more details about crash dumps.
 
+	  Usage of bzImage for capturing the crash dump is advantageous as
+	  one does not have to build two kernels. Same kernel can be used
+	  as production kernel and capture kernel.
+
 	  Don't change this unless you know what you are doing.
 
 config SECCOMP
@@ -627,14 +660,6 @@ config CC_STACKPROTECTOR_ALL
 
 source kernel/Kconfig.hz
 
-config REORDER
-	bool "Function reordering"
-	default n
-	help
-         This option enables the toolchain to reorder functions for a more 
-         optimal TLB usage. If you have pretty much any version of binutils, 
-	 this can increase your kernel build time by roughly one minute.
-
 config K8_NB
 	def_bool y
 	depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
@@ -676,6 +701,7 @@ menu "Bus options (PCI etc.)"
 
 config PCI
 	bool "PCI support"
+	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
 
 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
 config PCI_DIRECT
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 2941a915d4e..29617ae3926 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -40,10 +40,6 @@ cflags-y += -m64
 cflags-y += -mno-red-zone
 cflags-y += -mcmodel=kernel
 cflags-y += -pipe
-cflags-kernel-$(CONFIG_REORDER) += -ffunction-sections
-# this makes reading assembly source easier, but produces worse code
-# actually it makes the kernel smaller too.
-cflags-y += -fno-reorder-blocks
 cflags-y += -Wno-sign-compare
 cflags-y += -fno-asynchronous-unwind-tables
 ifneq ($(CONFIG_DEBUG_INFO),y)
diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile
index deb063e7762..ee6f6505f95 100644
--- a/arch/x86_64/boot/Makefile
+++ b/arch/x86_64/boot/Makefile
@@ -36,7 +36,7 @@ subdir-		:= compressed/	#Let make clean descend in compressed/
 # ---------------------------------------------------------------------------
 
 $(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
+$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
 $(obj)/bzImage: BUILDFLAGS   := -b
 
 quiet_cmd_image = BUILD   $@
diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile
index e70fa6e1da0..705a3e33d7e 100644
--- a/arch/x86_64/boot/compressed/Makefile
+++ b/arch/x86_64/boot/compressed/Makefile
@@ -8,16 +8,14 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
 EXTRA_AFLAGS	:= -traditional
-AFLAGS		:= $(subst -m64,-m32,$(AFLAGS))
 
 # cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
 # -m32
-CFLAGS := -m32 -D__KERNEL__ -Iinclude -O2  -fno-strict-aliasing
-LDFLAGS := -m elf_i386
+CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2  -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
+LDFLAGS := -m elf_x86_64
 
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 -m elf_i386
-
-$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+LDFLAGS_vmlinux := -T
+$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
@@ -27,7 +25,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
+LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
 
 $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
 	$(call if_changed,ld)
diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S
index 6f55565e4d4..f9d5692a010 100644
--- a/arch/x86_64/boot/compressed/head.S
+++ b/arch/x86_64/boot/compressed/head.S
@@ -26,116 +26,279 @@
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
+#include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/msr.h>
 
+.section ".text.head"
 	.code32
 	.globl startup_32
-	
+
 startup_32:
 	cld
 	cli
-	movl $(__KERNEL_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	movl %eax,%fs
-	movl %eax,%gs
-
-	lss stack_start,%esp
-	xorl %eax,%eax
-1:	incl %eax		# check that A20 really IS enabled
-	movl %eax,0x000000	# loop forever if it isn't
-	cmpl %eax,0x100000
-	je 1b
+	movl	$(__KERNEL_DS), %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at.  This can only be done
+ * with a short local call on x86.  Nothing  else will tell us what
+ * address we are running at.  The reserved chunk of the real-mode
+ * data at 0x34-0x3f are used as the stack for this calculation.
+ * Only 4 bytes are needed.
+ */
+	leal	0x40(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
+
+/* setup a stack and make sure cpu supports long mode. */
+	movl	$user_stack_end, %eax
+	addl	%ebp, %eax
+	movl	%eax, %esp
+
+	call	verify_cpu
+	testl	%eax, %eax
+	jnz	no_longmode
+
+/* Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ */
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+	movl	%ebp, %ebx
+	addl	$(LARGE_PAGE_SIZE -1), %ebx
+	andl	$LARGE_PAGE_MASK, %ebx
+#else
+	movl	$CONFIG_PHYSICAL_START, %ebx
+#endif
+
+	/* Replace the compressed data size with the uncompressed size */
+	subl	input_len(%ebp), %ebx
+	movl	output_len(%ebp), %eax
+	addl	%eax, %ebx
+	/* Add 8 bytes for every 32K input block */
+	shrl	$12, %eax
+	addl	%eax, %ebx
+	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+	addl	$(32768 + 18 + 4095), %ebx
+	andl	$~4095, %ebx
 
 /*
- * Initialize eflags.  Some BIOS's leave bits like NT set.  This would
- * confuse the debugger if this code is traced.
- * XXX - best to initialize before switching to protected mode.
+ * Prepare for entering 64 bit mode
  */
-	pushl $0
-	popfl
+
+	/* Load new GDT with the 64bit segments using 32bit descriptor */
+	leal	gdt(%ebp), %eax
+	movl	%eax, gdt+2(%ebp)
+	lgdt	gdt(%ebp)
+
+	/* Enable PAE mode */
+	xorl	%eax, %eax
+	orl	$(1 << 5), %eax
+	movl	%eax, %cr4
+
+ /*
+  * Build early 4G boot pagetable
+  */
+	/* Initialize Page tables to 0*/
+	leal	pgtable(%ebx), %edi
+	xorl	%eax, %eax
+	movl	$((4096*6)/4), %ecx
+	rep	stosl
+
+	/* Build Level 4 */
+	leal	pgtable + 0(%ebx), %edi
+	leal	0x1007 (%edi), %eax
+	movl	%eax, 0(%edi)
+
+	/* Build Level 3 */
+	leal	pgtable + 0x1000(%ebx), %edi
+	leal	0x1007(%edi), %eax
+	movl	$4, %ecx
+1:	movl	%eax, 0x00(%edi)
+	addl	$0x00001000, %eax
+	addl	$8, %edi
+	decl	%ecx
+	jnz	1b
+
+	/* Build Level 2 */
+	leal	pgtable + 0x2000(%ebx), %edi
+	movl	$0x00000183, %eax
+	movl	$2048, %ecx
+1:	movl	%eax, 0(%edi)
+	addl	$0x00200000, %eax
+	addl	$8, %edi
+	decl	%ecx
+	jnz	1b
+
+	/* Enable the boot page tables */
+	leal	pgtable(%ebx), %eax
+	movl	%eax, %cr3
+
+	/* Enable Long mode in EFER (Extended Feature Enable Register) */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	/* Setup for the jump to 64bit mode
+	 *
+	 * When the jump is performend we will be in long mode but
+	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+	 * (and in turn EFER.LMA = 1).	To jump into 64bit mode we use
+	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+	 * We place all of the values on our mini stack so lret can
+	 * used to perform that far jump.
+	 */
+	pushl	$__KERNEL_CS
+	leal	startup_64(%ebp), %eax
+	pushl	%eax
+
+	/* Enter paged protected Mode, activating Long Mode */
+	movl	$0x80000001, %eax /* Enable Paging and Protected mode */
+	movl	%eax, %cr0
+
+	/* Jump from 32bit compatibility mode into 64bit mode. */
+	lret
+
+no_longmode:
+	/* This isn't an x86-64 CPU so hang */
+1:
+	hlt
+	jmp     1b
+
+#include "../../kernel/verify_cpu.S"
+
+	/* Be careful here startup_64 needs to be at a predictable
+	 * address so I can export it in an ELF header.  Bootloaders
+	 * should look at the ELF header to find this address, as
+	 * it may change in the future.
+	 */
+	.code64
+	.org 0x200
+ENTRY(startup_64)
+	/* We come here either from startup_32 or directly from a
+	 * 64bit bootloader.  If we come here from a bootloader we depend on
+	 * an identity mapped page table being provied that maps our
+	 * entire text+data+bss and hopefully all of memory.
+	 */
+
+	/* Setup data segments. */
+	xorl	%eax, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+	/* Compute the decompressed kernel start address.  It is where
+	 * we were loaded at aligned to a 2M boundary. %rbp contains the
+	 * decompressed kernel start address.
+	 *
+	 * If it is a relocatable kernel then decompress and run the kernel
+	 * from load address aligned to 2MB addr, otherwise decompress and
+	 * run the kernel from CONFIG_PHYSICAL_START
+	 */
+
+	/* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
+	addq	$(LARGE_PAGE_SIZE - 1), %rbp
+	andq	$LARGE_PAGE_MASK, %rbp
+	movq	%rbp, %rbx
+#else
+	movq	$CONFIG_PHYSICAL_START, %rbp
+	movq	%rbp, %rbx
+#endif
+
+	/* Replace the compressed data size with the uncompressed size */
+	movl	input_len(%rip), %eax
+	subq	%rax, %rbx
+	movl	output_len(%rip), %eax
+	addq	%rax, %rbx
+	/* Add 8 bytes for every 32K input block */
+	shrq	$12, %rax
+	addq	%rax, %rbx
+	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+	addq	$(32768 + 18 + 4095), %rbx
+	andq	$~4095, %rbx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+	leaq	_end(%rip), %r8
+	leaq	_end(%rbx), %r9
+	movq	$_end /* - $startup_32 */, %rcx
+1:	subq	$8, %r8
+	subq	$8, %r9
+	movq	0(%r8), %rax
+	movq	%rax, 0(%r9)
+	subq	$8, %rcx
+	jnz	1b
+
+/*
+ * Jump to the relocated address.
+ */
+	leaq	relocated(%rbx), %rax
+	jmp	*%rax
+
+.section ".text"
+relocated:
+
 /*
  * Clear BSS
  */
-	xorl %eax,%eax
-	movl $_edata,%edi
-	movl $_end,%ecx
-	subl %edi,%ecx
+	xorq	%rax, %rax
+	leaq    _edata(%rbx), %rdi
+	leaq    _end(%rbx), %rcx
+	subq	%rdi, %rcx
 	cld
 	rep
 	stosb
+
+	/* Setup the stack */
+	leaq	user_stack_end(%rip), %rsp
+
+	/* zero EFLAGS after setting rsp */
+	pushq	$0
+	popfq
+
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	subl $16,%esp	# place for structure on the stack
-	movl %esp,%eax
-	pushl %esi	# real mode pointer as second arg
-	pushl %eax	# address of structure as first arg
-	call decompress_kernel
-	orl  %eax,%eax 
-	jnz  3f
-	addl $8,%esp
-	xorl %ebx,%ebx
-	ljmp $(__KERNEL_CS), $__PHYSICAL_START
+	pushq	%rsi			# Save the real mode argument
+	movq	%rsi, %rdi		# real mode address
+	leaq	_heap(%rip), %rsi	# _heap
+	leaq	input_data(%rip), %rdx  # input_data
+	movl	input_len(%rip), %eax
+	movq	%rax, %rcx		# input_len
+	movq	%rbp, %r8		# output
+	call	decompress_kernel
+	popq	%rsi
 
-/*
- * We come here, if we were loaded high.
- * We need to move the move-in-place routine down to 0x1000
- * and then start it with the buffer addresses in registers,
- * which we got from the stack.
- */
-3:
-	movl %esi,%ebx	
-	movl $move_routine_start,%esi
-	movl $0x1000,%edi
-	movl $move_routine_end,%ecx
-	subl %esi,%ecx
-	addl $3,%ecx
-	shrl $2,%ecx
-	cld
-	rep
-	movsl
-
-	popl %esi	# discard the address
-	addl $4,%esp	# real mode pointer
-	popl %esi	# low_buffer_start
-	popl %ecx	# lcount
-	popl %edx	# high_buffer_start
-	popl %eax	# hcount
-	movl $__PHYSICAL_START,%edi
-	cli		# make sure we don't get interrupted
-	ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
 
 /*
- * Routine (template) for moving the decompressed kernel in place,
- * if we were high loaded. This _must_ PIC-code !
+ * Jump to the decompressed kernel.
  */
-move_routine_start:
-	movl %ecx,%ebp
-	shrl $2,%ecx
-	rep
-	movsl
-	movl %ebp,%ecx
-	andl $3,%ecx
-	rep
-	movsb
-	movl %edx,%esi
-	movl %eax,%ecx	# NOTE: rep movsb won't move if %ecx == 0
-	addl $3,%ecx
-	shrl $2,%ecx
-	rep
-	movsl
-	movl %ebx,%esi	# Restore setup pointer
-	xorl %ebx,%ebx
-	ljmp $(__KERNEL_CS), $__PHYSICAL_START
-move_routine_end:
+	jmp	*%rbp
 
-
-/* Stack for uncompression */ 	
-	.align 32
-user_stack:	 	
+	.data
+gdt:
+	.word	gdt_end - gdt
+	.long	gdt
+	.word	0
+	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
+gdt_end:
+	.bss
+/* Stack for uncompression */
+	.balign 4
+user_stack:
 	.fill 4096,4,0
-stack_start:	
-	.long user_stack+4096
-	.word __KERNEL_DS
-
+user_stack_end:
diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c
index 3755b2e394d..f932b0e8909 100644
--- a/arch/x86_64/boot/compressed/misc.c
+++ b/arch/x86_64/boot/compressed/misc.c
@@ -9,10 +9,95 @@
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
 
+#define _LINUX_STRING_H_ 1
+#define __LINUX_BITMAP_H 1
+
+#include <linux/linkage.h>
 #include <linux/screen_info.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
+/* WARNING!!
+ * This code is compiled with -fPIC and it is relocated dynamically
+ * at run time, but no relocation processing is performed.
+ * This means that it is not safe to place pointers in static structures.
+ */
+
+/*
+ * Getting to provable safe in place decompression is hard.
+ * Worst case behaviours need to be analized.
+ * Background information:
+ *
+ * The file layout is:
+ *    magic[2]
+ *    method[1]
+ *    flags[1]
+ *    timestamp[4]
+ *    extraflags[1]
+ *    os[1]
+ *    compressed data blocks[N]
+ *    crc[4] orig_len[4]
+ *
+ * resulting in 18 bytes of non compressed data overhead.
+ *
+ * Files divided into blocks
+ * 1 bit (last block flag)
+ * 2 bits (block type)
+ *
+ * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
+ * The smallest block type encoding is always used.
+ *
+ * stored:
+ *    32 bits length in bytes.
+ *
+ * fixed:
+ *    magic fixed tree.
+ *    symbols.
+ *
+ * dynamic:
+ *    dynamic tree encoding.
+ *    symbols.
+ *
+ *
+ * The buffer for decompression in place is the length of the
+ * uncompressed data, plus a small amount extra to keep the algorithm safe.
+ * The compressed data is placed at the end of the buffer.  The output
+ * pointer is placed at the start of the buffer and the input pointer
+ * is placed where the compressed data starts.  Problems will occur
+ * when the output pointer overruns the input pointer.
+ *
+ * The output pointer can only overrun the input pointer if the input
+ * pointer is moving faster than the output pointer.  A condition only
+ * triggered by data whose compressed form is larger than the uncompressed
+ * form.
+ *
+ * The worst case at the block level is a growth of the compressed data
+ * of 5 bytes per 32767 bytes.
+ *
+ * The worst case internal to a compressed block is very hard to figure.
+ * The worst case can at least be boundined by having one bit that represents
+ * 32764 bytes and then all of the rest of the bytes representing the very
+ * very last byte.
+ *
+ * All of which is enough to compute an amount of extra data that is required
+ * to be safe.  To avoid problems at the block level allocating 5 extra bytes
+ * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
+ * adding an extra 32767 bytes (the worst case uncompressed block size) is
+ * sufficient, to ensure that in the worst case the decompressed data for
+ * block will stop the byte before the compressed data for a block begins.
+ * To avoid problems with the compressed data's meta information an extra 18
+ * bytes are needed.  Leading to the formula:
+ *
+ * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
+ *
+ * Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
+ * Adding 32768 instead of 32767 just makes for round numbers.
+ * Adding the decompressor_size is necessary as it musht live after all
+ * of the data as well.  Last I measured the decompressor is about 14K.
+ * 10K of actuall data and 4K of bss.
+ *
+ */
+
 /*
  * gzip declarations
  */
@@ -28,15 +113,20 @@ typedef unsigned char  uch;
 typedef unsigned short ush;
 typedef unsigned long  ulg;
 
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
+#define WSIZE 0x80000000	/* Window size must be at least 32k,
+				 * and a power of two
+				 * We don't actually have a window just
+				 * a huge output buffer so I report
+				 * a 2G windows size, as that should
+				 * always be larger than our output buffer.
+				 */
 
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
+static uch *inbuf;	/* input buffer */
+static uch *window;	/* Sliding window buffer, (and final output buffer) */
 
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
+static unsigned insize;  /* valid bytes in inbuf */
+static unsigned inptr;   /* index of next byte to be processed in inbuf */
+static unsigned outcnt;  /* bytes in output buffer */
 
 /* gzip flag byte */
 #define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
@@ -87,8 +177,6 @@ extern unsigned char input_data[];
 extern int input_len;
 
 static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
 
 static void *malloc(int size);
 static void free(void *where);
@@ -98,17 +186,10 @@ static void *memcpy(void *dest, const void *src, unsigned n);
 
 static void putstr(const char *);
 
-extern int end;
-static long free_mem_ptr = (long)&end;
+static long free_mem_ptr;
 static long free_mem_end_ptr;
 
-#define INPLACE_MOVE_ROUTINE  0x1000
-#define LOW_BUFFER_START      0x2000
-#define LOW_BUFFER_MAX       0x90000
-#define HEAP_SIZE             0x3000
-static unsigned int low_buffer_end, low_buffer_size;
-static int high_loaded =0;
-static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+#define HEAP_SIZE             0x7000
 
 static char *vidmem = (char *)0xb8000;
 static int vidport;
@@ -218,58 +299,31 @@ static void* memcpy(void* dest, const void* src, unsigned n)
  */
 static int fill_inbuf(void)
 {
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
+	error("ran out of input data");
+	return 0;
 }
 
 /* ===========================================================================
  * Write the output window window[0..outcnt-1] and update crc and bytes_out.
  * (Used for the decompressed data only.)
  */
-static void flush_window_low(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-    
-    in = window;
-    out = &output_data[output_ptr]; 
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
-static void flush_window_high(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in,  ch;
-    in = window;
-    for (n = 0; n < outcnt; n++) {
-	ch = *output_data++ = *in++;
-	if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start;
-	c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    outcnt = 0;
-}
-
 static void flush_window(void)
 {
-	if (high_loaded) flush_window_high();
-	else flush_window_low();
+	/* With my window equal to my output buffer
+	 * I only need to compute the crc here.
+	 */
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, ch;
+
+	in = window;
+	for (n = 0; n < outcnt; n++) {
+		ch = *in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	outcnt = 0;
 }
 
 static void error(char *x)
@@ -281,57 +335,8 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
-static void setup_normal_output_buffer(void)
-{
-#ifdef STANDARD_MEMORY_BIOS_CALL
-	if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory");
-#else
-	if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
-#endif
-	output_data = (unsigned char *)__PHYSICAL_START; /* Normally Points to 1M */
-	free_mem_end_ptr = (long)real_mode;
-}
-
-struct moveparams {
-	uch *low_buffer_start;  int lcount;
-	uch *high_buffer_start; int hcount;
-};
-
-static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
-{
-	high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE);
-#ifdef STANDARD_MEMORY_BIOS_CALL
-	if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
-#else
-	if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory");
-#endif	
-	mv->low_buffer_start = output_data = (unsigned char *)LOW_BUFFER_START;
-	low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX
-	  ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff;
-	low_buffer_size = low_buffer_end - LOW_BUFFER_START;
-	high_loaded = 1;
-	free_mem_end_ptr = (long)high_buffer_start;
-	if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) {
-		high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size);
-		mv->hcount = 0; /* say: we need not to move high_buffer */
-	}
-	else mv->hcount = -1;
-	mv->high_buffer_start = high_buffer_start;
-}
-
-static void close_output_buffer_if_we_run_high(struct moveparams *mv)
-{
-	if (bytes_out > low_buffer_size) {
-		mv->lcount = low_buffer_size;
-		if (mv->hcount)
-			mv->hcount = bytes_out - low_buffer_size;
-	} else {
-		mv->lcount = bytes_out;
-		mv->hcount = 0;
-	}
-}
-
-int decompress_kernel(struct moveparams *mv, void *rmode)
+asmlinkage void decompress_kernel(void *rmode, unsigned long heap,
+	uch *input_data, unsigned long input_len, uch *output)
 {
 	real_mode = rmode;
 
@@ -346,13 +351,21 @@ int decompress_kernel(struct moveparams *mv, void *rmode)
 	lines = RM_SCREEN_INFO.orig_video_lines;
 	cols = RM_SCREEN_INFO.orig_video_cols;
 
-	if (free_mem_ptr < 0x100000) setup_normal_output_buffer();
-	else setup_output_buffer_if_we_run_high(mv);
+	window = output;  		/* Output buffer (Normally at 1M) */
+	free_mem_ptr     = heap;	/* Heap  */
+	free_mem_end_ptr = heap + HEAP_SIZE;
+	inbuf  = input_data;		/* Input buffer */
+	insize = input_len;
+	inptr  = 0;
+
+	if ((ulg)output & (__KERNEL_ALIGN - 1))
+		error("Destination address not 2M aligned");
+	if ((ulg)output >= 0xffffffffffUL)
+		error("Destination address too large");
 
 	makecrc();
 	putstr(".\nDecompressing Linux...");
 	gunzip();
 	putstr("done.\nBooting the kernel.\n");
-	if (high_loaded) close_output_buffer_if_we_run_high(mv);
-	return high_loaded;
+	return;
 }
diff --git a/arch/x86_64/boot/compressed/vmlinux.lds b/arch/x86_64/boot/compressed/vmlinux.lds
new file mode 100644
index 00000000000..94c13e557fb
--- /dev/null
+++ b/arch/x86_64/boot/compressed/vmlinux.lds
@@ -0,0 +1,44 @@
+OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+SECTIONS
+{
+	/* Be careful parts of head.S assume startup_32 is at
+ 	 * address 0.
+	 */
+	. = 0;
+	.text :	{
+		_head = . ;
+		*(.text.head)
+		_ehead = . ;
+		*(.text.compressed)
+		_text = .; 	/* Text */
+		*(.text)
+		*(.text.*)
+		_etext = . ;
+	}
+	.rodata : {
+		_rodata = . ;
+		*(.rodata)	 /* read-only data */
+		*(.rodata.*)
+		_erodata = . ;
+	}
+	.data :	{
+		_data = . ;
+		*(.data)
+		*(.data.*)
+		_edata = . ;
+	}
+	.bss : {
+		_bss = . ;
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(8);
+		_end = . ;
+		. = ALIGN(4096);
+		pgtable = . ;
+		. = . + 4096 * 6;
+		_heap = .;
+	}
+}
diff --git a/arch/x86_64/boot/compressed/vmlinux.scr b/arch/x86_64/boot/compressed/vmlinux.scr
index 1ed9d791f86..bd1429ce193 100644
--- a/arch/x86_64/boot/compressed/vmlinux.scr
+++ b/arch/x86_64/boot/compressed/vmlinux.scr
@@ -1,9 +1,10 @@
 SECTIONS
 {
-  .data : { 
+  .text.compressed : {
 	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
+	LONG(input_data_end - input_data) input_data = .;
+	*(.data)
+	output_len = . - 4;
+	input_data_end = .;
 	}
 }
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
index 770940cc010..e9e33f94969 100644
--- a/arch/x86_64/boot/setup.S
+++ b/arch/x86_64/boot/setup.S
@@ -51,6 +51,7 @@
 #include <asm/boot.h>
 #include <asm/e820.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 
 /* Signature words to ensure LILO loaded us right */
 #define SIG1	0xAA55
@@ -80,7 +81,7 @@ start:
 # This is the setup header, and it must start at %cs:2 (old 0x9020:2)
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0204		# header version number (>= 0x0105)
+		.word	0x0206		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
 start_sys_seg:	.word	SYSSEG
@@ -155,7 +156,20 @@ cmd_line_ptr:	.long 0			# (Header version 0x0202 or later)
 					# low memory 0x10000 or higher.
 
 ramdisk_max:	.long 0xffffffff
-	
+kernel_alignment:  .long 0x200000       # physical addr alignment required for
+					# protected mode relocatable kernel
+#ifdef CONFIG_RELOCATABLE
+relocatable_kernel:    .byte 1
+#else
+relocatable_kernel:    .byte 0
+#endif
+pad2:                  .byte 0
+pad3:                  .word 0
+
+cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
+                                                #added with boot protocol
+                                                #version 2.06
+
 trampoline:	call	start_of_setup
 		.align 16
 					# The offset at this point is 0x240
@@ -290,64 +304,10 @@ loader_ok:
 	movw	%cs,%ax
 	movw	%ax,%ds
 	
-	/* minimum CPUID flags for x86-64 */
-	/* see http://www.x86-64.org/lists/discuss/msg02971.html */		
-#define SSE_MASK ((1<<25)|(1<<26))
-#define REQUIRED_MASK1 ((1<<0)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<8)|\
-					   (1<<13)|(1<<15)|(1<<24))
-#define REQUIRED_MASK2 (1<<29)
-
-	pushfl				/* standard way to check for cpuid */
-	popl	%eax
-	movl	%eax,%ebx
-	xorl	$0x200000,%eax
-	pushl	%eax
-	popfl
-	pushfl
-	popl	%eax
-	cmpl	%eax,%ebx
-	jz	no_longmode		/* cpu has no cpuid */
-	movl	$0x0,%eax
-	cpuid
-	cmpl	$0x1,%eax
-	jb	no_longmode		/* no cpuid 1 */
-	xor	%di,%di
-	cmpl	$0x68747541,%ebx	/* AuthenticAMD */
-	jnz	noamd
-	cmpl	$0x69746e65,%edx
-	jnz	noamd
-	cmpl	$0x444d4163,%ecx
-	jnz	noamd
-	mov	$1,%di			/* cpu is from AMD */
-noamd:		
-	movl    $0x1,%eax
-	cpuid
-	andl	$REQUIRED_MASK1,%edx
-	xorl	$REQUIRED_MASK1,%edx
-	jnz	no_longmode
-	movl    $0x80000000,%eax
-	cpuid
-	cmpl    $0x80000001,%eax
-	jb      no_longmode             /* no extended cpuid */
-	movl    $0x80000001,%eax
-	cpuid
-	andl    $REQUIRED_MASK2,%edx
-	xorl    $REQUIRED_MASK2,%edx
-	jnz     no_longmode
-sse_test:		
-	movl	$1,%eax
-	cpuid
-	andl	$SSE_MASK,%edx
-	cmpl	$SSE_MASK,%edx
-	je	sse_ok
-	test	%di,%di
-	jz	no_longmode	/* only try to force SSE on AMD */ 
-	movl	$0xc0010015,%ecx	/* HWCR */
-	rdmsr
-	btr	$15,%eax	/* enable SSE */
-	wrmsr
-	xor	%di,%di		/* don't loop */
-	jmp	sse_test	/* try again */	
+	call verify_cpu
+	testl %eax,%eax
+	jz sse_ok
+
 no_longmode:
 	call	beep
 	lea	long_mode_panic,%si
@@ -357,7 +317,8 @@ no_longmode_loop:
 long_mode_panic:
 	.string "Your CPU does not support long mode. Use a 32bit distribution."
 	.byte 0
-	
+
+#include "../kernel/verify_cpu.S"
 sse_ok:
 	popw	%ds
 	
@@ -846,7 +807,7 @@ gdt_48:
 
 # Include video setup & detection code
 
-#include "video.S"
+#include "../../i386/boot/video.S"
 
 # Setup signature -- must be last
 setup_sig1:	.word	SIG1
diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S
deleted file mode 100644
index 6090516c9c7..00000000000
--- a/arch/x86_64/boot/video.S
+++ /dev/null
@@ -1,2043 +0,0 @@
-/*	video.S
- *
- *	Display adapter & video mode setup, version 2.13 (14-May-99)
- *
- *	Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
- *	Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
- *
- *	Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
- *
- *	For further information, look at Documentation/svga.txt.
- *
- */
-
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Enable compacting of mode table */
-#define CONFIG_VIDEO_COMPACT
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Enable local mode list */
-#undef CONFIG_VIDEO_LOCAL
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* Hack that lets you force specific BIOS mode ID and specific dimensions */
-#undef CONFIG_VIDEO_GFX_HACK
-#define VIDEO_GFX_BIOS_AX 0x4f02	/* 800x600 on ThinkPad */
-#define VIDEO_GFX_BIOS_BX 0x0102
-#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425	/* 100x37 */
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- *	NORMAL_VGA (-1)
- *	EXTENDED_VGA (-2)
- *	ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-/* Special video modes */
-#define VIDEO_FIRST_SPECIAL 0x0f00
-#define VIDEO_80x25 0x0f00
-#define VIDEO_8POINT 0x0f01
-#define VIDEO_80x43 0x0f02
-#define VIDEO_80x28 0x0f03
-#define VIDEO_CURRENT_MODE 0x0f04
-#define VIDEO_80x30 0x0f05
-#define VIDEO_80x34 0x0f06
-#define VIDEO_80x60 0x0f07
-#define VIDEO_GFX_HACK 0x0f08
-#define VIDEO_LAST_SPECIAL 0x0f09
-
-/* Video modes given by resolution */
-#define VIDEO_FIRST_RESOLUTION 0x1000
-
-/* The "recalculate timings" flag */
-#define VIDEO_RECALC 0x8000
-
-/* Positions of various video parameters passed to the kernel */
-/* (see also include/linux/tty.h) */
-#define PARAM_CURSOR_POS	0x00
-#define PARAM_VIDEO_PAGE	0x04
-#define PARAM_VIDEO_MODE	0x06
-#define PARAM_VIDEO_COLS	0x07
-#define PARAM_VIDEO_EGA_BX	0x0a
-#define PARAM_VIDEO_LINES	0x0e
-#define PARAM_HAVE_VGA		0x0f
-#define PARAM_FONT_POINTS	0x10
-
-#define PARAM_LFB_WIDTH		0x12
-#define PARAM_LFB_HEIGHT	0x14
-#define PARAM_LFB_DEPTH		0x16
-#define PARAM_LFB_BASE		0x18
-#define PARAM_LFB_SIZE		0x1c
-#define PARAM_LFB_LINELENGTH	0x24
-#define PARAM_LFB_COLORS	0x26
-#define PARAM_VESAPM_SEG	0x2e
-#define PARAM_VESAPM_OFF	0x30
-#define PARAM_LFB_PAGES		0x32
-#define PARAM_VESA_ATTRIB	0x34
-#define PARAM_CAPABILITIES	0x36
-
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
-#define DO_STORE call store_screen
-#else
-#define DO_STORE
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# This is the main entry point called by setup.S
-# %ds *must* be pointing to the bootsector
-video:	pushw	%ds		# We use different segments
-	pushw	%ds		# FS contains original DS
-	popw	%fs
-	pushw	%cs		# DS is equal to CS
-	popw	%ds
-	pushw	%cs		# ES is equal to CS
-	popw	%es
-	xorw	%ax, %ax
-	movw	%ax, %gs	# GS is zero
-	cld
-	call	basic_detect	# Basic adapter type testing (EGA/VGA/MDA/CGA)
-#ifdef CONFIG_VIDEO_SELECT
-	movw	%fs:(0x01fa), %ax		# User selected video mode
-	cmpw	$ASK_VGA, %ax			# Bring up the menu
-	jz	vid2
-
-	call	mode_set			# Set the mode
-	jc	vid1
-
-	leaw	badmdt, %si			# Invalid mode ID
-	call	prtstr
-vid2:	call	mode_menu
-vid1:
-#ifdef CONFIG_VIDEO_RETAIN
-	call	restore_screen			# Restore screen contents
-#endif /* CONFIG_VIDEO_RETAIN */
-	call	store_edid
-#endif /* CONFIG_VIDEO_SELECT */
-	call	mode_params			# Store mode parameters
-	popw	%ds				# Restore original DS
-	ret
-
-# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
-basic_detect:
-	movb	$0, %fs:(PARAM_HAVE_VGA)
-	movb	$0x12, %ah	# Check EGA/VGA
-	movb	$0x10, %bl
-	int	$0x10
-	movw	%bx, %fs:(PARAM_VIDEO_EGA_BX)	# Identifies EGA to the kernel
-	cmpb	$0x10, %bl			# No, it's a CGA/MDA/HGA card.
-	je	basret
-
-	incb	adapter
-	movw	$0x1a00, %ax			# Check EGA or VGA?
-	int	$0x10
-	cmpb	$0x1a, %al			# 1a means VGA...
-	jne	basret				# anything else is EGA.
-	
-	incb	%fs:(PARAM_HAVE_VGA)		# We've detected a VGA
-	incb	adapter
-basret:	ret
-
-# Store the video mode parameters for later usage by the kernel.
-# This is done by asking the BIOS except for the rows/columns
-# parameters in the default 80x25 mode -- these are set directly,
-# because some very obscure BIOSes supply insane values.
-mode_params:
-#ifdef CONFIG_VIDEO_SELECT
-	cmpb	$0, graphic_mode
-	jnz	mopar_gr
-#endif
-	movb	$0x03, %ah			# Read cursor position
-	xorb	%bh, %bh
-	int	$0x10
-	movw	%dx, %fs:(PARAM_CURSOR_POS)
-	movb	$0x0f, %ah			# Read page/mode/width
-	int	$0x10
-	movw	%bx, %fs:(PARAM_VIDEO_PAGE)
-	movw	%ax, %fs:(PARAM_VIDEO_MODE)	# Video mode and screen width
-	cmpb	$0x7, %al			# MDA/HGA => segment differs
-	jnz	mopar0
-
-	movw	$0xb000, video_segment
-mopar0: movw	%gs:(0x485), %ax		# Font size
-	movw	%ax, %fs:(PARAM_FONT_POINTS)	# (valid only on EGA/VGA)
-	movw	force_size, %ax			# Forced size?
-	orw	%ax, %ax
-	jz	mopar1
-
-	movb	%ah, %fs:(PARAM_VIDEO_COLS)
-	movb	%al, %fs:(PARAM_VIDEO_LINES)
-	ret
-
-mopar1:	movb	$25, %al
-	cmpb	$0, adapter			# If we are on CGA/MDA/HGA, the
-	jz	mopar2				# screen must have 25 lines.
-
-	movb	%gs:(0x484), %al		# On EGA/VGA, use the EGA+ BIOS
-	incb	%al				# location of max lines.
-mopar2: movb	%al, %fs:(PARAM_VIDEO_LINES)
-	ret
-
-#ifdef CONFIG_VIDEO_SELECT
-# Fetching of VESA frame buffer parameters
-mopar_gr:
-	leaw	modelist+1024, %di
-	movb	$0x23, %fs:(PARAM_HAVE_VGA)
-	movw	16(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_LINELENGTH)
-	movw	18(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_WIDTH)
-	movw	20(%di), %ax
-	movw	%ax, %fs:(PARAM_LFB_HEIGHT)
-	movb	25(%di), %al
-	movb	$0, %ah
-	movw	%ax, %fs:(PARAM_LFB_DEPTH)
-	movb	29(%di), %al	
-	movb	$0, %ah
-	movw	%ax, %fs:(PARAM_LFB_PAGES)
-	movl	40(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_BASE)
-	movl	31(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_COLORS)
-	movl	35(%di), %eax
-	movl	%eax, %fs:(PARAM_LFB_COLORS+4)
-	movw	0(%di), %ax
-	movw	%ax, %fs:(PARAM_VESA_ATTRIB)
-
-# get video mem size
-	leaw	modelist+1024, %di
-	movw	$0x4f00, %ax
-	int	$0x10
-	xorl	%eax, %eax
-	movw	18(%di), %ax
-	movl	%eax, %fs:(PARAM_LFB_SIZE)
-
-# store mode capabilities
-	movl 10(%di), %eax
-	movl %eax, %fs:(PARAM_CAPABILITIES)
-
-# switching the DAC to 8-bit is for <= 8 bpp only
-	movw	%fs:(PARAM_LFB_DEPTH), %ax
-	cmpw	$8, %ax
-	jg	dac_done
-
-# get DAC switching capability
-	xorl	%eax, %eax
-	movb	10(%di), %al
-	testb	$1, %al
-	jz	dac_set
-
-# attempt to switch DAC to 8-bit
-	movw	$0x4f08, %ax
-	movw	$0x0800, %bx
-	int	$0x10
-	cmpw	$0x004f, %ax
-	jne     dac_set
-	movb    %bh, dac_size		# store actual DAC size
-
-dac_set:
-# set color size to DAC size
-	movb	dac_size, %al
-	movb	%al, %fs:(PARAM_LFB_COLORS+0)
-	movb	%al, %fs:(PARAM_LFB_COLORS+2)
-	movb	%al, %fs:(PARAM_LFB_COLORS+4)
-	movb	%al, %fs:(PARAM_LFB_COLORS+6)
-
-# set color offsets to 0
-	movb	$0, %fs:(PARAM_LFB_COLORS+1)
-	movb	$0, %fs:(PARAM_LFB_COLORS+3)
-	movb	$0, %fs:(PARAM_LFB_COLORS+5)
-	movb	$0, %fs:(PARAM_LFB_COLORS+7)
-
-dac_done:
-# get protected mode interface informations
-	movw	$0x4f0a, %ax
-	xorw	%bx, %bx
-	xorw	%di, %di
-	int	$0x10
-	cmp	$0x004f, %ax
-	jnz	no_pm
-
-	movw	%es, %fs:(PARAM_VESAPM_SEG)
-	movw	%di, %fs:(PARAM_VESAPM_OFF)
-no_pm:	ret
-
-# The video mode menu
-mode_menu:
-	leaw	keymsg, %si			# "Return/Space/Timeout" message
-	call	prtstr
-	call	flush
-nokey:	call	getkt
-
-	cmpb	$0x0d, %al			# ENTER ?
-	je	listm				# yes - manual mode selection
-
-	cmpb	$0x20, %al			# SPACE ?
-	je	defmd1				# no - repeat
-
-	call 	beep
-	jmp	nokey
-
-defmd1:	ret					# No mode chosen? Default 80x25
-
-listm:	call	mode_table			# List mode table
-listm0:	leaw	name_bann, %si			# Print adapter name
-	call	prtstr
-	movw	card_name, %si
-	orw	%si, %si
-	jnz	an2
-
-	movb	adapter, %al
-	leaw	old_name, %si
-	orb	%al, %al
-	jz	an1
-
-	leaw	ega_name, %si
-	decb	%al
-	jz	an1
-
-	leaw	vga_name, %si
-	jmp	an1
-
-an2:	call	prtstr
-	leaw	svga_name, %si
-an1:	call	prtstr
-	leaw	listhdr, %si			# Table header
-	call	prtstr
-	movb	$0x30, %dl			# DL holds mode number
-	leaw	modelist, %si
-lm1:	cmpw	$ASK_VGA, (%si)			# End?
-	jz	lm2
-
-	movb	%dl, %al			# Menu selection number
-	call	prtchr
-	call	prtsp2
-	lodsw
-	call	prthw				# Mode ID
-	call	prtsp2
-	movb	0x1(%si), %al
-	call	prtdec				# Rows
-	movb	$0x78, %al			# the letter 'x'
-	call	prtchr
-	lodsw
-	call	prtdec				# Columns
-	movb	$0x0d, %al			# New line
-	call	prtchr
-	movb	$0x0a, %al
-	call	prtchr
-	incb	%dl				# Next character
-	cmpb	$0x3a, %dl
-	jnz	lm1
-
-	movb	$0x61, %dl
-	jmp	lm1
-
-lm2:	leaw	prompt, %si			# Mode prompt
-	call	prtstr
-	leaw	edit_buf, %di			# Editor buffer
-lm3:	call	getkey
-	cmpb	$0x0d, %al			# Enter?
-	jz	lment
-
-	cmpb	$0x08, %al			# Backspace?
-	jz	lmbs
-
-	cmpb	$0x20, %al			# Printable?
-	jc	lm3
-
-	cmpw	$edit_buf+4, %di		# Enough space?
-	jz	lm3
-
-	stosb
-	call	prtchr
-	jmp	lm3
-
-lmbs:	cmpw	$edit_buf, %di			# Backspace
-	jz	lm3
-
-	decw	%di
-	movb	$0x08, %al
-	call	prtchr
-	call	prtspc
-	movb	$0x08, %al
-	call	prtchr
-	jmp	lm3
-	
-lment:	movb	$0, (%di)
-	leaw	crlft, %si
-	call	prtstr
-	leaw	edit_buf, %si
-	cmpb	$0, (%si)			# Empty string = default mode
-	jz	lmdef
-
-	cmpb	$0, 1(%si)			# One character = menu selection
-	jz	mnusel
-
-	cmpw	$0x6373, (%si)			# "scan" => mode scanning
-	jnz	lmhx
-
-	cmpw	$0x6e61, 2(%si)
-	jz	lmscan
-
-lmhx:	xorw	%bx, %bx			# Else => mode ID in hex
-lmhex:	lodsb
-	orb	%al, %al
-	jz	lmuse1
-
-	subb	$0x30, %al
-	jc	lmbad
-
-	cmpb	$10, %al
-	jc	lmhx1
-
-	subb	$7, %al
-	andb	$0xdf, %al
-	cmpb	$10, %al
-	jc	lmbad
-
-	cmpb	$16, %al
-	jnc	lmbad
-
-lmhx1:	shlw	$4, %bx
-	orb	%al, %bl
-	jmp	lmhex
-
-lmuse1:	movw	%bx, %ax
-	jmp	lmuse
-
-mnusel:	lodsb					# Menu selection
-	xorb	%ah, %ah
-	subb	$0x30, %al
-	jc	lmbad
-
-	cmpb	$10, %al
-	jc	lmuse
-	
-	cmpb	$0x61-0x30, %al
-	jc	lmbad
-	
-	subb	$0x61-0x30-10, %al
-	cmpb	$36, %al
-	jnc	lmbad
-
-lmuse:	call	mode_set
-	jc	lmdef
-
-lmbad:	leaw	unknt, %si
-	call	prtstr
-	jmp	lm2
-lmscan:	cmpb	$0, adapter			# Scanning only on EGA/VGA
-	jz	lmbad
-
-	movw	$0, mt_end			# Scanning of modes is
-	movb	$1, scanning			# done as new autodetection.
-	call	mode_table
-	jmp	listm0
-lmdef:	ret
-
-# Additional parts of mode_set... (relative jumps, you know)
-setv7:						# Video7 extended modes
-	DO_STORE
-	subb	$VIDEO_FIRST_V7>>8, %bh
-	movw	$0x6f05, %ax
-	int	$0x10
-	stc
-	ret
-
-_setrec:	jmp	setrec			# Ugly...
-_set_80x25:	jmp	set_80x25
-
-# Aliases for backward compatibility.
-setalias:
-	movw	$VIDEO_80x25, %ax
-	incw	%bx
-	jz	mode_set
-
-	movb	$VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
-	incw	%bx
-	jnz	setbad				# Fall-through!
-
-# Setting of user mode (AX=mode ID) => CF=success
-mode_set:
-	movw	%ax, %fs:(0x01fa)		# Store mode for use in acpi_wakeup.S
-	movw	%ax, %bx
-	cmpb	$0xff, %ah
-	jz	setalias
-
-	testb	$VIDEO_RECALC>>8, %ah
-	jnz	_setrec
-
-	cmpb	$VIDEO_FIRST_RESOLUTION>>8, %ah
-	jnc	setres
-	
-	cmpb	$VIDEO_FIRST_SPECIAL>>8, %ah
-	jz	setspc
-	
-	cmpb	$VIDEO_FIRST_V7>>8, %ah
-	jz	setv7
-	
-	cmpb	$VIDEO_FIRST_VESA>>8, %ah
-	jnc	check_vesa
-	
-	orb	%ah, %ah
-	jz	setmenu
-	
-	decb	%ah
-	jz	setbios
-
-setbad:	clc
-	movb	$0, do_restore			# The screen needn't be restored
-	ret
-
-setvesa:
-	DO_STORE
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	setbad				# AH=0 if OK
-
-	stc
-	ret
-
-setbios:
-	DO_STORE
-	int	$0x10				# Standard BIOS mode set call
-	pushw	%bx
-	movb	$0x0f, %ah			# Check if really set
-	int	$0x10
-	popw	%bx
-	cmpb	%bl, %al
-	jnz	setbad
-	
-	stc
-	ret
-
-setspc:	xorb	%bh, %bh			# Set special mode
-	cmpb	$VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
-	jnc	setbad
-	
-	addw	%bx, %bx
-	jmp	*spec_inits(%bx)
-
-setmenu:
-	orb	%al, %al			# 80x25 is an exception
-	jz	_set_80x25
-	
-	pushw	%bx				# Set mode chosen from menu
-	call	mode_table			# Build the mode table
-	popw	%ax
-	shlw	$2, %ax
-	addw	%ax, %si
-	cmpw	%di, %si
-	jnc	setbad
-	
-	movw	(%si), %ax			# Fetch mode ID
-_m_s:	jmp	mode_set
-
-setres:	pushw	%bx				# Set mode chosen by resolution
-	call	mode_table
-	popw	%bx
-	xchgb	%bl, %bh
-setr1:	lodsw
-	cmpw	$ASK_VGA, %ax			# End of the list?
-	jz	setbad
-	
-	lodsw
-	cmpw	%bx, %ax
-	jnz	setr1
-	
-	movw	-4(%si), %ax			# Fetch mode ID
-	jmp	_m_s
-
-check_vesa:
-#ifdef CONFIG_FIRMWARE_EDID
-	leaw	modelist+1024, %di
-	movw	$0x4f00, %ax
-	int	$0x10
-	cmpw	$0x004f, %ax
-	jnz	setbad
-
-	movw	4(%di), %ax
-	movw	%ax, vbe_version
-#endif
-	leaw	modelist+1024, %di
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	movw	%bx, %cx			# Get mode information structure
-	movw	$0x4f01, %ax
-	int	$0x10
-	addb	$VIDEO_FIRST_VESA>>8, %bh
-	cmpw	$0x004f, %ax
-	jnz	setbad
-
-	movb	(%di), %al			# Check capabilities.
-	andb	$0x19, %al
-	cmpb	$0x09, %al
-	jz	setvesa				# This is a text mode
-
-	movb	(%di), %al			# Check capabilities.
-	andb	$0x99, %al
-	cmpb	$0x99, %al
-	jnz	_setbad				# Doh! No linear frame buffer.
-
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	orw	$0x4000, %bx			# Use linear frame buffer
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	_setbad				# AH=0 if OK
-
-	movb	$1, graphic_mode		# flag graphic mode
-	movb	$0, do_restore			# no screen restore
-	stc
-	ret
-
-_setbad:	jmp	setbad          	# Ugly...
-
-# Recalculate vertical display end registers -- this fixes various
-# inconsistencies of extended modes on many adapters. Called when
-# the VIDEO_RECALC flag is set in the mode ID.
-
-setrec:	subb	$VIDEO_RECALC>>8, %ah		# Set the base mode
-	call	mode_set
-	jnc	rct3
-
-	movw	%gs:(0x485), %ax		# Font size in pixels
-	movb	%gs:(0x484), %bl		# Number of rows
-	incb	%bl
-	mulb	%bl				# Number of visible
-	decw	%ax				# scan lines - 1
-	movw	$0x3d4, %dx
-	movw	%ax, %bx
-	movb	$0x12, %al			# Lower 8 bits
-	movb	%bl, %ah
-	outw	%ax, %dx
-	movb	$0x07, %al		# Bits 8 and 9 in the overflow register
-	call	inidx
-	xchgb	%al, %ah
-	andb	$0xbd, %ah
-	shrb	%bh
-	jnc	rct1
-	orb	$0x02, %ah
-rct1:	shrb	%bh
-	jnc	rct2
-	orb	$0x40, %ah
-rct2:	movb	$0x07, %al
-	outw	%ax, %dx
-	stc
-rct3:	ret
-
-# Table of routines for setting of the special modes.
-spec_inits:
-	.word	set_80x25
-	.word	set_8pixel
-	.word	set_80x43
-	.word	set_80x28
-	.word	set_current
-	.word	set_80x30
-	.word	set_80x34
-	.word	set_80x60
-	.word	set_gfx
-
-# Set the 80x25 mode. If already set, do nothing.
-set_80x25:
-	movw	$0x5019, force_size		# Override possibly broken BIOS
-use_80x25:
-#ifdef CONFIG_VIDEO_400_HACK
-	movw	$0x1202, %ax			# Force 400 scan lines
-	movb	$0x30, %bl
-	int	$0x10
-#else
-	movb	$0x0f, %ah			# Get current mode ID
-	int	$0x10
-	cmpw	$0x5007, %ax	# Mode 7 (80x25 mono) is the only one available
-	jz	st80		# on CGA/MDA/HGA and is also available on EGAM
-
-	cmpw	$0x5003, %ax	# Unknown mode, force 80x25 color
-	jnz	force3
-
-st80:	cmpb	$0, adapter	# CGA/MDA/HGA => mode 3/7 is always 80x25
-	jz	set80
-
-	movb	%gs:(0x0484), %al	# This is EGA+ -- beware of 80x50 etc.
-	orb	%al, %al		# Some buggy BIOS'es set 0 rows
-	jz	set80
-	
-	cmpb	$24, %al		# It's hopefully correct
-	jz	set80
-#endif /* CONFIG_VIDEO_400_HACK */
-force3:	DO_STORE
-	movw	$0x0003, %ax			# Forced set
-	int	$0x10
-set80:	stc
-	ret
-
-# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
-set_8pixel:
-	DO_STORE
-	call	use_80x25			# The base is 80x25
-set_8pt:
-	movw	$0x1112, %ax			# Use 8x8 font
-	xorb	%bl, %bl
-	int	$0x10
-	movw	$0x1200, %ax			# Use alternate print screen
-	movb	$0x20, %bl
-	int	$0x10
-	movw	$0x1201, %ax			# Turn off cursor emulation
-	movb	$0x34, %bl
-	int	$0x10
-	movb	$0x01, %ah			# Define cursor scan lines 6-7
-	movw	$0x0607, %cx
-	int	$0x10
-set_current:
-	stc
-	ret
-
-# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
-# 80x25 mode with 14-point fonts instead of 16-point.
-set_80x28:
-	DO_STORE
-	call	use_80x25			# The base is 80x25
-set14:	movw	$0x1111, %ax			# Use 9x14 font
-	xorb	%bl, %bl
-	int	$0x10
-	movb	$0x01, %ah			# Define cursor scan lines 11-12
-	movw	$0x0b0c, %cx
-	int	$0x10
-	stc
-	ret
-
-# Set the 80x43 mode. This mode is works on all VGA's.
-# It's a 350-scanline mode with 8-pixel font.
-set_80x43:
-	DO_STORE
-	movw	$0x1201, %ax			# Set 350 scans
-	movb	$0x30, %bl
-	int	$0x10
-	movw	$0x0003, %ax			# Reset video mode
-	int	$0x10
-	jmp	set_8pt				# Use 8-pixel font
-
-# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
-set_80x30:
-	call	use_80x25			# Start with real 80x25
-	DO_STORE
-	movw	$0x3cc, %dx			# Get CRTC port
-	inb	%dx, %al
-	movb	$0xd4, %dl
-	rorb	%al				# Mono or color?
-	jc	set48a
-
-	movb	$0xb4, %dl
-set48a:	movw	$0x0c11, %ax		# Vertical sync end (also unlocks CR0-7)
- 	call	outidx
-	movw	$0x0b06, %ax			# Vertical total
- 	call	outidx
-	movw	$0x3e07, %ax			# (Vertical) overflow
- 	call	outidx
-	movw	$0xea10, %ax			# Vertical sync start
- 	call	outidx
-	movw	$0xdf12, %ax			# Vertical display end
-	call	outidx
-	movw	$0xe715, %ax			# Vertical blank start
- 	call	outidx
-	movw	$0x0416, %ax			# Vertical blank end
- 	call	outidx
-	pushw	%dx
-	movb	$0xcc, %dl			# Misc output register (read)
- 	inb	%dx, %al
- 	movb	$0xc2, %dl			# (write)
- 	andb	$0x0d, %al	# Preserve clock select bits and color bit
- 	orb	$0xe2, %al			# Set correct sync polarity
- 	outb	%al, %dx
-	popw	%dx
-	movw	$0x501e, force_size
-	stc					# That's all.
-	ret
-
-# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
-set_80x34:
-	call	set_80x30			# Set 480 scans
-	call	set14				# And 14-pt font
-	movw	$0xdb12, %ax			# VGA vertical display end
-	movw	$0x5022, force_size
-setvde:	call	outidx
-	stc
-	ret
-
-# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
-set_80x60:
-	call	set_80x30			# Set 480 scans
-	call	set_8pt				# And 8-pt font
-	movw	$0xdf12, %ax			# VGA vertical display end
-	movw	$0x503c, force_size
-	jmp	setvde
-
-# Special hack for ThinkPad graphics
-set_gfx:
-#ifdef CONFIG_VIDEO_GFX_HACK
-	movw	$VIDEO_GFX_BIOS_AX, %ax
-	movw	$VIDEO_GFX_BIOS_BX, %bx
-	int	$0x10
-	movw	$VIDEO_GFX_DUMMY_RESOLUTION, force_size
-	stc
-#endif
-	ret
-
-#ifdef CONFIG_VIDEO_RETAIN
-
-# Store screen contents to temporary buffer.
-store_screen:
-	cmpb	$0, do_restore			# Already stored?
-	jnz	stsr
-
-	testb	$CAN_USE_HEAP, loadflags	# Have we space for storing?
-	jz	stsr
-	
-	pushw	%ax
-	pushw	%bx
-	pushw	force_size			# Don't force specific size
-	movw	$0, force_size
-	call	mode_params			# Obtain params of current mode
-	popw	force_size
-	movb	%fs:(PARAM_VIDEO_LINES), %ah
-	movb	%fs:(PARAM_VIDEO_COLS), %al
-	movw	%ax, %bx			# BX=dimensions
-	mulb	%ah
-	movw	%ax, %cx			# CX=number of characters
-	addw	%ax, %ax			# Calculate image size
-	addw	$modelist+1024+4, %ax
-	cmpw	heap_end_ptr, %ax
-	jnc	sts1				# Unfortunately, out of memory
-
-	movw	%fs:(PARAM_CURSOR_POS), %ax	# Store mode params
-	leaw	modelist+1024, %di
-	stosw
-	movw	%bx, %ax
-	stosw
-	pushw	%ds				# Store the screen
-	movw	video_segment, %ds
-	xorw	%si, %si
-	rep
-	movsw
-	popw	%ds
-	incb	do_restore			# Screen will be restored later
-sts1:	popw	%bx
-	popw	%ax
-stsr:	ret
-
-# Restore screen contents from temporary buffer.
-restore_screen:
-	cmpb	$0, do_restore			# Has the screen been stored?
-	jz	res1
-
-	call	mode_params			# Get parameters of current mode
-	movb	%fs:(PARAM_VIDEO_LINES), %cl
-	movb	%fs:(PARAM_VIDEO_COLS), %ch
-	leaw	modelist+1024, %si		# Screen buffer
-	lodsw					# Set cursor position
-	movw	%ax, %dx
-	cmpb	%cl, %dh
-	jc	res2
-	
-	movb	%cl, %dh
-	decb	%dh
-res2:	cmpb	%ch, %dl
-	jc	res3
-	
-	movb	%ch, %dl
-	decb	%dl
-res3:	movb	$0x02, %ah
-	movb	$0x00, %bh
-	int	$0x10
-	lodsw					# Display size
-	movb	%ah, %dl			# DL=number of lines
-	movb	$0, %ah				# BX=phys. length of orig. line
-	movw	%ax, %bx
-	cmpb	%cl, %dl			# Too many?
-	jc	res4
-
-	pushw	%ax
-	movb	%dl, %al
-	subb	%cl, %al
-	mulb	%bl
-	addw	%ax, %si
-	addw	%ax, %si
-	popw	%ax
-	movb	%cl, %dl
-res4:	cmpb	%ch, %al			# Too wide?
-	jc	res5
-	
-	movb	%ch, %al			# AX=width of src. line
-res5:	movb	$0, %cl
-	xchgb	%ch, %cl
-	movw	%cx, %bp			# BP=width of dest. line
-	pushw	%es
-	movw	video_segment, %es
-	xorw	%di, %di			# Move the data
-	addw	%bx, %bx			# Convert BX and BP to _bytes_
-	addw	%bp, %bp
-res6:	pushw	%si
-	pushw	%di
-	movw	%ax, %cx
-	rep
-	movsw
-	popw	%di
-	popw	%si
-	addw	%bp, %di
-	addw	%bx, %si
-	decb	%dl
-	jnz	res6
-	
-	popw	%es				# Done
-res1:	ret
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
-outidx:	outb	%al, %dx
-	pushw	%ax
-	movb	%ah, %al
-	incw	%dx
-	outb	%al, %dx
-	decw	%dx
-	popw	%ax
-	ret
-
-# Build the table of video modes (stored after the setup.S code at the
-# `modelist' label. Each video mode record looks like:
-#	.word	MODE-ID		(our special mode ID (see above))
-#	.byte	rows		(number of rows)
-#	.byte	columns		(number of columns)
-# Returns address of the end of the table in DI, the end is marked
-# with a ASK_VGA ID.
-mode_table:
-	movw	mt_end, %di			# Already filled?
-	orw	%di, %di
-	jnz	mtab1x
-	
-	leaw	modelist, %di			# Store standard modes:
-	movl	$VIDEO_80x25 + 0x50190000, %eax	# The 80x25 mode (ALL)
-	stosl
-	movb	adapter, %al			# CGA/MDA/HGA -- no more modes
-	orb	%al, %al
-	jz	mtabe
-	
-	decb	%al
-	jnz	mtabv
-	
-	movl	$VIDEO_8POINT + 0x502b0000, %eax	# The 80x43 EGA mode
-	stosl
-	jmp	mtabe
-
-mtab1x:	jmp	mtab1
-
-mtabv:	leaw	vga_modes, %si			# All modes for std VGA
-	movw	$vga_modes_end-vga_modes, %cx
-	rep	# I'm unable to use movsw as I don't know how to store a half
-	movsb	# of the expression above to cx without using explicit shr.
-
-	cmpb	$0, scanning			# Mode scan requested?
-	jz	mscan1
-	
-	call	mode_scan
-mscan1:
-
-#ifdef CONFIG_VIDEO_LOCAL
-	call	local_modes
-#endif /* CONFIG_VIDEO_LOCAL */
-
-#ifdef CONFIG_VIDEO_VESA
-	call	vesa_modes			# Detect VESA VGA modes
-#endif /* CONFIG_VIDEO_VESA */
-
-#ifdef CONFIG_VIDEO_SVGA
-	cmpb	$0, scanning			# Bypass when scanning
-	jnz	mscan2
-	
-	call	svga_modes			# Detect SVGA cards & modes
-mscan2:
-#endif /* CONFIG_VIDEO_SVGA */
-
-mtabe:
-
-#ifdef CONFIG_VIDEO_COMPACT
-	leaw	modelist, %si
-	movw	%di, %dx
-	movw	%si, %di
-cmt1:	cmpw	%dx, %si			# Scan all modes
-	jz	cmt2
-
-	leaw	modelist, %bx			# Find in previous entries
-	movw	2(%si), %cx
-cmt3:	cmpw	%bx, %si
-	jz	cmt4
-
-	cmpw	2(%bx), %cx			# Found => don't copy this entry
-	jz	cmt5
-
-	addw	$4, %bx
-	jmp	cmt3
-
-cmt4:	movsl					# Copy entry
-	jmp	cmt1
-
-cmt5:	addw	$4, %si				# Skip entry
-	jmp	cmt1
-
-cmt2:
-#endif	/* CONFIG_VIDEO_COMPACT */
-
-	movw	$ASK_VGA, (%di)			# End marker
-	movw	%di, mt_end
-mtab1:	leaw	modelist, %si			# SI=mode list, DI=list end
-ret0:	ret
-
-# Modes usable on all standard VGAs
-vga_modes:
-	.word	VIDEO_8POINT
-	.word	0x5032				# 80x50
-	.word	VIDEO_80x43
-	.word	0x502b				# 80x43
-	.word	VIDEO_80x28
-	.word	0x501c				# 80x28
-	.word	VIDEO_80x30
-	.word	0x501e				# 80x30
-	.word	VIDEO_80x34
-	.word	0x5022				# 80x34
-	.word	VIDEO_80x60
-	.word	0x503c				# 80x60
-#ifdef CONFIG_VIDEO_GFX_HACK
-	.word	VIDEO_GFX_HACK
-	.word	VIDEO_GFX_DUMMY_RESOLUTION
-#endif
-
-vga_modes_end:
-# Detect VESA modes.
-
-#ifdef CONFIG_VIDEO_VESA
-vesa_modes:
-	cmpb	$2, adapter			# VGA only
-	jnz	ret0
-
-	movw	%di, %bp			# BP=original mode table end
-	addw	$0x200, %di			# Buffer space
-	movw	$0x4f00, %ax			# VESA Get card info call
-	int	$0x10
-	movw	%bp, %di
-	cmpw	$0x004f, %ax			# Successful?
-	jnz	ret0
-	
-	cmpw	$0x4556, 0x200(%di)
-	jnz	ret0
-	
-	cmpw	$0x4153, 0x202(%di)
-	jnz	ret0
-	
-	movw	$vesa_name, card_name		# Set name to "VESA VGA"
-	pushw	%gs
-	lgsw	0x20e(%di), %si			# GS:SI=mode list
-	movw	$128, %cx			# Iteration limit
-vesa1:
-# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
-# XXX:	lodsw	%gs:(%si), %ax			# Get next mode in the list
-	gs; lodsw
-	cmpw	$0xffff, %ax			# End of the table?
-	jz	vesar
-	
-	cmpw	$0x0080, %ax			# Check validity of mode ID
-	jc	vesa2
-	
-	orb	%ah, %ah		# Valid IDs: 0x0000-0x007f/0x0100-0x07ff
-	jz	vesan			# Certain BIOSes report 0x80-0xff!
-
-	cmpw	$0x0800, %ax
-	jnc	vesae
-
-vesa2:	pushw	%cx
-	movw	%ax, %cx			# Get mode information structure
-	movw	$0x4f01, %ax
-	int	$0x10
-	movw	%cx, %bx			# BX=mode number
-	addb	$VIDEO_FIRST_VESA>>8, %bh
-	popw	%cx
-	cmpw	$0x004f, %ax
-	jnz	vesan			# Don't report errors (buggy BIOSES)
-
-	movb	(%di), %al			# Check capabilities. We require
-	andb	$0x19, %al			# a color text mode.
-	cmpb	$0x09, %al
-	jnz	vesan
-	
-	cmpw	$0xb800, 8(%di)		# Standard video memory address required
-	jnz	vesan
-
-	testb	$2, (%di)			# Mode characteristics supplied?
-	movw	%bx, (%di)			# Store mode number
-	jz	vesa3
-	
-	xorw	%dx, %dx
-	movw	0x12(%di), %bx			# Width
-	orb	%bh, %bh
-	jnz	vesan
-	
-	movb	%bl, 0x3(%di)
-	movw	0x14(%di), %ax			# Height
-	orb	%ah, %ah
-	jnz	vesan
-	
-	movb	%al, 2(%di)
-	mulb	%bl
-	cmpw	$8193, %ax		# Small enough for Linux console driver?
-	jnc	vesan
-
-	jmp	vesaok
-
-vesa3:	subw	$0x8108, %bx	# This mode has no detailed info specified,
-	jc	vesan		# so it must be a standard VESA mode.
-
-	cmpw	$5, %bx
-	jnc	vesan
-
-	movw	vesa_text_mode_table(%bx), %ax
-	movw	%ax, 2(%di)
-vesaok:	addw	$4, %di				# The mode is valid. Store it.
-vesan:	loop	vesa1			# Next mode. Limit exceeded => error
-vesae:	leaw	vesaer, %si
-	call	prtstr
-	movw	%bp, %di			# Discard already found modes.
-vesar:	popw	%gs
-	ret
-
-# Dimensions of standard VESA text modes
-vesa_text_mode_table:
-	.byte	60, 80				# 0108
-	.byte	25, 132				# 0109
-	.byte	43, 132				# 010A
-	.byte	50, 132				# 010B
-	.byte	60, 132				# 010C
-#endif	/* CONFIG_VIDEO_VESA */
-
-# Scan for video modes. A bit dirty, but should work.
-mode_scan:
-	movw	$0x0100, %cx			# Start with mode 0
-scm1:	movb	$0, %ah				# Test the mode
-	movb	%cl, %al
-	int	$0x10
-	movb	$0x0f, %ah
-	int	$0x10
-	cmpb	%cl, %al
-	jnz	scm2				# Mode not set
-
-	movw	$0x3c0, %dx			# Test if it's a text mode
-	movb	$0x10, %al			# Mode bits
-	call	inidx
-	andb	$0x03, %al
-	jnz	scm2
-	
-	movb	$0xce, %dl			# Another set of mode bits
-	movb	$0x06, %al
-	call	inidx
-	shrb	%al
-	jc	scm2
-	
-	movb	$0xd4, %dl			# Cursor location
-	movb	$0x0f, %al
-	call	inidx
-	orb	%al, %al
-	jnz	scm2
-	
-	movw	%cx, %ax			# Ok, store the mode
-	stosw
-	movb	%gs:(0x484), %al		# Number of rows
-	incb	%al
-	stosb
-	movw	%gs:(0x44a), %ax		# Number of columns
-	stosb
-scm2:	incb	%cl
-	jns	scm1
-	
-	movw	$0x0003, %ax			# Return back to mode 3
-	int	$0x10
-	ret
-
-tstidx:	outw	%ax, %dx			# OUT DX,AX and inidx
-inidx:	outb	%al, %dx			# Read from indexed VGA register
-	incw	%dx			# AL=index, DX=index reg port -> AL=data
-	inb	%dx, %al
-	decw	%dx
-	ret
-
-# Try to detect type of SVGA card and supply (usually approximate) video
-# mode table for it.
-
-#ifdef CONFIG_VIDEO_SVGA
-svga_modes:
-	leaw	svga_table, %si			# Test all known SVGA adapters
-dosvga:	lodsw
-	movw	%ax, %bp			# Default mode table
-	orw	%ax, %ax
-	jz	didsv1
-
-	lodsw					# Pointer to test routine
-	pushw	%si
-	pushw	%di
-	pushw	%es
-	movw	$0xc000, %bx
-	movw	%bx, %es
-	call	*%ax				# Call test routine
-	popw	%es
-	popw	%di
-	popw	%si
-	orw	%bp, %bp
-	jz	dosvga
-	
-	movw	%bp, %si			# Found, copy the modes
-	movb	svga_prefix, %ah
-cpsvga:	lodsb
-	orb	%al, %al
-	jz	didsv
-	
-	stosw
-	movsw
-	jmp	cpsvga
-
-didsv:	movw	%si, card_name			# Store pointer to card name
-didsv1:	ret
-
-# Table of all known SVGA cards. For each card, we store a pointer to
-# a table of video modes supported by the card and a pointer to a routine
-# used for testing of presence of the card. The video mode table is always
-# followed by the name of the card or the chipset.
-svga_table:
-	.word	ati_md, ati_test
-	.word	oak_md, oak_test
-	.word	paradise_md, paradise_test
-	.word	realtek_md, realtek_test
-	.word	s3_md, s3_test
-	.word	chips_md, chips_test
-	.word	video7_md, video7_test
-	.word	cirrus5_md, cirrus5_test
-	.word	cirrus6_md, cirrus6_test
-	.word	cirrus1_md, cirrus1_test
-	.word	ahead_md, ahead_test
-	.word	everex_md, everex_test
-	.word	genoa_md, genoa_test
-	.word	trident_md, trident_test
-	.word	tseng_md, tseng_test
-	.word	0
-
-# Test routines and mode tables:
-
-# S3 - The test algorithm was taken from the SuperProbe package
-# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
-s3_test:
-	movw	$0x0f35, %cx	# we store some constants in cl/ch
-	movw	$0x03d4, %dx
-	movb	$0x38, %al
-	call	inidx
-	movb	%al, %bh	# store current CRT-register 0x38
-	movw	$0x0038, %ax
-	call	outidx		# disable writing to special regs
-	movb	%cl, %al	# check whether we can write special reg 0x35
-	call	inidx
-	movb	%al, %bl	# save the current value of CRT reg 0x35
-	andb	$0xf0, %al	# clear bits 0-3
-	movb	%al, %ah
-	movb	%cl, %al	# and write it to CRT reg 0x35
-	call	outidx
-	call	inidx		# now read it back
-	andb	%ch, %al	# clear the upper 4 bits
-	jz	s3_2		# the first test failed. But we have a
-
-	movb	%bl, %ah	# second chance
-	movb	%cl, %al
-	call	outidx
-	jmp	s3_1		# do the other tests
-
-s3_2:	movw	%cx, %ax	# load ah with 0xf and al with 0x35
-	orb	%bl, %ah	# set the upper 4 bits of ah with the orig value
-	call	outidx		# write ...
-	call	inidx		# ... and reread 
-	andb	%cl, %al	# turn off the upper 4 bits
-	pushw	%ax
-	movb	%bl, %ah	# restore old value in register 0x35
-	movb	%cl, %al
-	call	outidx
-	popw	%ax
-	cmpb	%ch, %al	# setting lower 4 bits was successful => bad
-	je	no_s3		# writing is allowed => this is not an S3
-
-s3_1:	movw	$0x4838, %ax	# allow writing to special regs by putting
-	call	outidx		# magic number into CRT-register 0x38
-	movb	%cl, %al	# check whether we can write special reg 0x35
-	call	inidx
-	movb	%al, %bl
-	andb	$0xf0, %al
-	movb	%al, %ah
-	movb	%cl, %al
-	call	outidx
-	call	inidx
-	andb	%ch, %al
-	jnz	no_s3		# no, we can't write => no S3
-
-	movw	%cx, %ax
-	orb	%bl, %ah
-	call	outidx
-	call	inidx
-	andb	%ch, %al
-	pushw	%ax
-	movb	%bl, %ah	# restore old value in register 0x35
-	movb	%cl, %al
-	call	outidx
-	popw	%ax
-	cmpb	%ch, %al
-	jne	no_s31		# writing not possible => no S3
-	movb	$0x30, %al
-	call	inidx		# now get the S3 id ...
-	leaw	idS3, %di
-	movw	$0x10, %cx
-	repne
-	scasb
-	je	no_s31
-
-	movb	%bh, %ah
-	movb	$0x38, %al
-	jmp	s3rest
-
-no_s3:	movb	$0x35, %al	# restore CRT register 0x35
-	movb	%bl, %ah
-	call	outidx
-no_s31:	xorw	%bp, %bp	# Detection failed
-s3rest:	movb	%bh, %ah
-	movb	$0x38, %al	# restore old value of CRT register 0x38
-	jmp	outidx
-
-idS3:	.byte	0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
-	.byte	0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
-
-s3_md:	.byte	0x54, 0x2b, 0x84
-	.byte	0x55, 0x19, 0x84
-	.byte	0
-	.ascii	"S3"
-	.byte	0
-
-# ATI cards.
-ati_test:
-	leaw 	idati, %si
-	movw	$0x31, %di
-	movw	$0x09, %cx
-	repe
-	cmpsb
-	je	atiok
-
-	xorw	%bp, %bp
-atiok:	ret
-
-idati:	.ascii	"761295520"
-
-ati_md:	.byte	0x23, 0x19, 0x84
-	.byte	0x33, 0x2c, 0x84
-	.byte	0x22, 0x1e, 0x64
-	.byte	0x21, 0x19, 0x64
-	.byte	0x58, 0x21, 0x50
-	.byte	0x5b, 0x1e, 0x50
-	.byte	0
-	.ascii	"ATI"
-	.byte	0
-
-# AHEAD
-ahead_test:
-	movw	$0x200f, %ax
-	movw	$0x3ce, %dx
-	outw	%ax, %dx
-	incw	%dx
-	inb	%dx, %al
-	cmpb	$0x20, %al
-	je	isahed
-
-	cmpb	$0x21, %al
-	je	isahed
-	
-	xorw	%bp, %bp
-isahed:	ret
-
-ahead_md:
-	.byte	0x22, 0x2c, 0x84
-	.byte	0x23, 0x19, 0x84
-	.byte	0x24, 0x1c, 0x84
-	.byte	0x2f, 0x32, 0xa0
-	.byte	0x32, 0x22, 0x50
-	.byte	0x34, 0x42, 0x50
-	.byte	0
-	.ascii	"Ahead"
-	.byte	0
-
-# Chips & Tech.
-chips_test:
-	movw	$0x3c3, %dx
-	inb	%dx, %al
-	orb	$0x10, %al
-	outb	%al, %dx
-	movw	$0x104, %dx
-	inb	%dx, %al
-	movb	%al, %bl
-	movw	$0x3c3, %dx
-	inb	%dx, %al
-	andb	$0xef, %al
-	outb	%al, %dx
-	cmpb	$0xa5, %bl
-	je	cantok
-	
-	xorw	%bp, %bp
-cantok:	ret
-
-chips_md:
-	.byte	0x60, 0x19, 0x84
-	.byte	0x61, 0x32, 0x84
-	.byte	0
-	.ascii	"Chips & Technologies"
-	.byte	0
-
-# Cirrus Logic 5X0
-cirrus1_test:
-	movw	$0x3d4, %dx
-	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bl
-	xorb	%al, %al
-	outb	%al, %dx
-	decw	%dx
-	movb	$0x1f, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bh
-	xorb	%ah, %ah
-	shlb	$4, %al
-	movw	%ax, %cx
-	movb	%bh, %al
-	shrb	$4, %al
-	addw	%ax, %cx
-	shlw	$8, %cx
-	addw	$6, %cx
-	movw	%cx, %ax
-	movw	$0x3c4, %dx
-	outw	%ax, %dx
-	incw	%dx
-	inb	%dx, %al
-	andb	%al, %al
-	jnz	nocirr
-	
-	movb	%bh, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	cmpb	$0x01, %al
-	je	iscirr
-
-nocirr:	xorw	%bp, %bp
-iscirr: movw	$0x3d4, %dx
-	movb	%bl, %al
-	xorb	%ah, %ah
-	shlw	$8, %ax
-	addw	$0x0c, %ax
-	outw	%ax, %dx
-	ret
-
-cirrus1_md:
-	.byte	0x1f, 0x19, 0x84
-	.byte	0x20, 0x2c, 0x84
-	.byte	0x22, 0x1e, 0x84
-	.byte	0x31, 0x25, 0x64
-	.byte	0
-	.ascii	"Cirrus Logic 5X0"
-	.byte	0
-
-# Cirrus Logic 54XX
-cirrus5_test:
-	movw	$0x3c4, %dx
-	movb	$6, %al
-	call	inidx
-	movb	%al, %bl			# BL=backup
-	movw	$6, %ax
-	call	tstidx
-	cmpb	$0x0f, %al
-	jne	c5fail
-	
-	movw	$0x1206, %ax
-	call	tstidx
-	cmpb	$0x12, %al
-	jne	c5fail
-	
-	movb	$0x1e, %al
-	call	inidx
-	movb	%al, %bh
-	movb	%bh, %ah
-	andb	$0xc0, %ah
-	movb	$0x1e, %al
-	call	tstidx
-	andb	$0x3f, %al
-	jne	c5xx
-	
-	movb	$0x1e, %al
-	movb	%bh, %ah
-	orb	$0x3f, %ah
-	call	tstidx
-	xorb	$0x3f, %al
-	andb	$0x3f, %al
-c5xx:	pushf
-	movb	$0x1e, %al
-	movb	%bh, %ah
-	outw	%ax, %dx
-	popf
-	je	c5done
-
-c5fail:	xorw	%bp, %bp
-c5done:	movb	$6, %al
-	movb	%bl, %ah
-	outw	%ax, %dx
-	ret
-
-cirrus5_md:
-	.byte	0x14, 0x19, 0x84
-	.byte	0x54, 0x2b, 0x84
-	.byte	0
-	.ascii	"Cirrus Logic 54XX"
-	.byte	0
-
-# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
-# it's misidentified by the Ahead test.
-cirrus6_test:
-	movw	$0x3ce, %dx
-	movb	$0x0a, %al
-	call	inidx
-	movb	%al, %bl	# BL=backup
-	movw	$0xce0a, %ax
-	call	tstidx
-	orb	%al, %al
-	jne	c2fail
-	
-	movw	$0xec0a, %ax
-	call	tstidx
-	cmpb	$0x01, %al
-	jne	c2fail
-	
-	movb	$0xaa, %al
-	call	inidx		# 4X, 5X, 7X and 8X are valid 64XX chip ID's. 
-	shrb	$4, %al
-	subb	$4, %al
-	jz	c6done
-	
-	decb	%al
-	jz	c6done
-	
-	subb	$2, %al
-	jz	c6done
-	
-	decb	%al
-	jz	c6done
-	
-c2fail:	xorw	%bp, %bp
-c6done:	movb	$0x0a, %al
-	movb	%bl, %ah
-	outw	%ax, %dx
-	ret
-
-cirrus6_md:
-	.byte	0
-	.ascii	"Cirrus Logic 64XX"
-	.byte	0
-
-# Everex / Trident
-everex_test:
-	movw	$0x7000, %ax
-	xorw	%bx, %bx
-	int	$0x10
-	cmpb	$0x70, %al
-	jne	noevrx
-	
-	shrw	$4, %dx
-	cmpw	$0x678, %dx
-	je	evtrid
-	
-	cmpw	$0x236, %dx
-	jne	evrxok
-
-evtrid:	leaw	trident_md, %bp
-evrxok:	ret
-
-noevrx:	xorw	%bp, %bp
-	ret
-
-everex_md:
-	.byte	0x03, 0x22, 0x50
-	.byte	0x04, 0x3c, 0x50
-	.byte	0x07, 0x2b, 0x64
-	.byte	0x08, 0x4b, 0x64
-	.byte	0x0a, 0x19, 0x84
-	.byte	0x0b, 0x2c, 0x84
-	.byte	0x16, 0x1e, 0x50
-	.byte	0x18, 0x1b, 0x64
-	.byte	0x21, 0x40, 0xa0
-	.byte	0x40, 0x1e, 0x84
-	.byte	0
-	.ascii	"Everex/Trident"
-	.byte	0
-
-# Genoa.
-genoa_test:
-	leaw	idgenoa, %si			# Check Genoa 'clues'
-	xorw	%ax, %ax
-	movb	%es:(0x37), %al
-	movw	%ax, %di
-	movw	$0x04, %cx
-	decw	%si
-	decw	%di
-l1:	incw	%si
-	incw	%di
-	movb	(%si), %al
-	testb	%al, %al
-	jz	l2
-
-	cmpb	%es:(%di), %al
-l2:	loope 	l1
-	orw	%cx, %cx
-	je	isgen
-	
-	xorw	%bp, %bp
-isgen:	ret
-
-idgenoa: .byte	0x77, 0x00, 0x99, 0x66
-
-genoa_md:
-	.byte	0x58, 0x20, 0x50
-	.byte	0x5a, 0x2a, 0x64
-	.byte	0x60, 0x19, 0x84
-	.byte	0x61, 0x1d, 0x84
-	.byte	0x62, 0x20, 0x84
-	.byte	0x63, 0x2c, 0x84
-	.byte	0x64, 0x3c, 0x84
-	.byte	0x6b, 0x4f, 0x64
-	.byte	0x72, 0x3c, 0x50
-	.byte	0x74, 0x42, 0x50
-	.byte	0x78, 0x4b, 0x64
-	.byte	0
-	.ascii	"Genoa"
-	.byte	0
-
-# OAK
-oak_test:
-	leaw	idoakvga, %si
-	movw	$0x08, %di
-	movw	$0x08, %cx
-	repe
-	cmpsb
-	je	isoak
-	
-	xorw	%bp, %bp
-isoak:	ret
-
-idoakvga: .ascii  "OAK VGA "
-
-oak_md: .byte	0x4e, 0x3c, 0x50
-	.byte	0x4f, 0x3c, 0x84
-	.byte	0x50, 0x19, 0x84
-	.byte	0x51, 0x2b, 0x84
-	.byte	0
-	.ascii	"OAK"
-	.byte	0
-
-# WD Paradise.
-paradise_test:
-	leaw	idparadise, %si
-	movw	$0x7d, %di
-	movw	$0x04, %cx
-	repe
-	cmpsb
-	je	ispara
-	
-	xorw	%bp, %bp
-ispara:	ret
-
-idparadise:	.ascii	"VGA="
-
-paradise_md:
-	.byte	0x41, 0x22, 0x50
-	.byte	0x47, 0x1c, 0x84
-	.byte	0x55, 0x19, 0x84
-	.byte	0x54, 0x2c, 0x84
-	.byte	0
-	.ascii	"Paradise"
-	.byte	0
-
-# Trident.
-trident_test:
-	movw	$0x3c4, %dx
-	movb	$0x0e, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	xchgb	%al, %ah
-	xorb	%al, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	xchgb	%ah, %al
-	movb	%al, %bl	# Strange thing ... in the book this wasn't
-	andb	$0x02, %bl	# necessary but it worked on my card which
-	jz	setb2		# is a trident. Without it the screen goes
-				# blurred ...
-	andb	$0xfd, %al
-	jmp	clrb2		
-
-setb2:	orb	$0x02, %al	
-clrb2:	outb	%al, %dx
-	andb	$0x0f, %ah
-	cmpb	$0x02, %ah
-	je	istrid
-
-	xorw	%bp, %bp
-istrid:	ret
-
-trident_md:
-	.byte	0x50, 0x1e, 0x50
-	.byte	0x51, 0x2b, 0x50
-	.byte	0x52, 0x3c, 0x50
-	.byte	0x57, 0x19, 0x84
-	.byte	0x58, 0x1e, 0x84
-	.byte	0x59, 0x2b, 0x84
-	.byte	0x5a, 0x3c, 0x84
-	.byte	0
-	.ascii	"Trident"
-	.byte	0
-
-# Tseng.
-tseng_test:
-	movw	$0x3cd, %dx
-	inb	%dx, %al	# Could things be this simple ! :-)
-	movb	%al, %bl
-	movb	$0x55, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	movb	%al, %ah
-	movb	%bl, %al
-	outb	%al, %dx
-	cmpb	$0x55, %ah
- 	je	istsen
-
-isnot:	xorw	%bp, %bp
-istsen:	ret
-
-tseng_md:
-	.byte	0x26, 0x3c, 0x50
-	.byte	0x2a, 0x28, 0x64
-	.byte	0x23, 0x19, 0x84
-	.byte	0x24, 0x1c, 0x84
-	.byte	0x22, 0x2c, 0x84
-	.byte	0x21, 0x3c, 0x84
-	.byte	0
-	.ascii	"Tseng"
-	.byte	0
-
-# Video7.
-video7_test:
-	movw	$0x3cc, %dx
-	inb	%dx, %al
-	movw	$0x3b4, %dx
-	andb	$0x01, %al
-	jz	even7
-
-	movw	$0x3d4, %dx
-even7:	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bl
-	movb	$0x55, %al
-	outb	%al, %dx
-	inb	%dx, %al
-	decw	%dx
-	movb	$0x1f, %al
-	outb	%al, %dx
-	incw	%dx
-	inb	%dx, %al
-	movb	%al, %bh
-	decw	%dx
-	movb	$0x0c, %al
-	outb	%al, %dx
-	incw	%dx
-	movb	%bl, %al
-	outb	%al, %dx
-	movb	$0x55, %al
-	xorb	$0xea, %al
-	cmpb	%bh, %al
-	jne	isnot
-	
-	movb	$VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
-	ret
-
-video7_md:
-	.byte	0x40, 0x2b, 0x50
-	.byte	0x43, 0x3c, 0x50
-	.byte	0x44, 0x3c, 0x64
-	.byte	0x41, 0x19, 0x84
-	.byte	0x42, 0x2c, 0x84
-	.byte	0x45, 0x1c, 0x84
-	.byte	0
-	.ascii	"Video 7"
-	.byte	0
-
-# Realtek VGA
-realtek_test:
-	leaw	idrtvga, %si
-	movw	$0x45, %di
-	movw	$0x0b, %cx
-	repe
-	cmpsb
-	je	isrt
-	
-	xorw	%bp, %bp
-isrt:	ret
-
-idrtvga:	.ascii	"REALTEK VGA"
-
-realtek_md:
-	.byte	0x1a, 0x3c, 0x50
-	.byte	0x1b, 0x19, 0x84
-	.byte	0x1c, 0x1e, 0x84
-	.byte	0x1d, 0x2b, 0x84
-	.byte	0x1e, 0x3c, 0x84
-	.byte	0
-	.ascii	"REALTEK"
-	.byte	0
-
-#endif	/* CONFIG_VIDEO_SVGA */
-
-# User-defined local mode table (VGA only)
-#ifdef CONFIG_VIDEO_LOCAL
-local_modes:
-	leaw	local_mode_table, %si
-locm1:	lodsw
-	orw	%ax, %ax
-	jz	locm2
-	
-	stosw
-	movsw
-	jmp	locm1
-
-locm2:	ret
-
-# This is the table of local video modes which can be supplied manually
-# by the user. Each entry consists of mode ID (word) and dimensions
-# (byte for column count and another byte for row count). These modes
-# are placed before all SVGA and VESA modes and override them if table
-# compacting is enabled. The table must end with a zero word followed
-# by NUL-terminated video adapter name.
-local_mode_table:
-	.word	0x0100				# Example: 40x25
-	.byte	25,40
-	.word	0
-	.ascii	"Local"
-	.byte	0
-#endif	/* CONFIG_VIDEO_LOCAL */
-
-# Read a key and return the ASCII code in al, scan code in ah
-getkey:	xorb	%ah, %ah
-	int	$0x16
-	ret
-
-# Read a key with a timeout of 30 seconds.
-# The hardware clock is used to get the time.
-getkt:	call	gettime
-	addb	$30, %al			# Wait 30 seconds
-	cmpb	$60, %al
-	jl	lminute
-
-	subb	$60, %al
-lminute:
-	movb	%al, %cl
-again:	movb	$0x01, %ah
-	int	$0x16
-	jnz	getkey				# key pressed, so get it
-
-	call	gettime
-	cmpb	%cl, %al
-	jne	again
-
-	movb	$0x20, %al			# timeout, return `space'
-	ret
-
-# Flush the keyboard buffer
-flush:	movb	$0x01, %ah
-	int	$0x16
-	jz	empty
-	
-	xorb	%ah, %ah
-	int	$0x16
-	jmp	flush
-
-empty:	ret
-
-# Print hexadecimal number.
-prthw:	pushw	%ax
-	movb	%ah, %al
-	call	prthb
-	popw	%ax
-prthb:	pushw	%ax
-	shrb	$4, %al
-	call	prthn
-	popw	%ax
-	andb	$0x0f, %al
-prthn:	cmpb	$0x0a, %al
-	jc	prth1
-
-	addb	$0x07, %al
-prth1:	addb	$0x30, %al
-	jmp	prtchr
-
-# Print decimal number in al
-prtdec:	pushw	%ax
-	pushw	%cx
-	xorb	%ah, %ah
-	movb	$0x0a, %cl
-	idivb	%cl
-	cmpb	$0x09, %al
-	jbe	lt100
-
-	call	prtdec
-	jmp	skip10
-
-lt100:	addb	$0x30, %al
-	call	prtchr
-skip10:	movb	%ah, %al
-	addb	$0x30, %al
-	call	prtchr	
-	popw	%cx
-	popw	%ax
-	ret
-
-store_edid:
-#ifdef CONFIG_FIRMWARE_EDID
-	pushw	%es				# just save all registers
-	pushw	%ax
-	pushw	%bx
-	pushw   %cx
-	pushw	%dx
-	pushw   %di
-
-	pushw	%fs
-	popw    %es
-
-	movl	$0x13131313, %eax		# memset block with 0x13
-	movw    $32, %cx
-	movw	$0x140, %di
-	cld
-	rep
-	stosl
-
-	cmpw	$0x0200, vbe_version		# only do EDID on >= VBE2.0
-	jl	no_edid
-
-	pushw   %es				# save ES
-	xorw    %di, %di                        # Report Capability
-	pushw   %di
-	popw    %es                             # ES:DI must be 0:0
-	movw	$0x4f15, %ax
-	xorw	%bx, %bx
-	xorw	%cx, %cx
-	int	$0x10
-	popw    %es                             # restore ES
-
-	cmpb    $0x00, %ah                      # call successful
-	jne     no_edid
-
-	cmpb    $0x4f, %al                      # function supported
-	jne     no_edid
-
-	movw	$0x4f15, %ax                    # do VBE/DDC
-	movw	$0x01, %bx
-	movw	$0x00, %cx
-	movw    $0x01, %dx
-	movw	$0x140, %di
-	int	$0x10
-
-no_edid:
-	popw	%di				# restore all registers
-	popw	%dx
-	popw	%cx
-	popw	%bx
-	popw	%ax
-	popw	%es
-#endif
-	ret
-
-# VIDEO_SELECT-only variables
-mt_end:		.word	0	# End of video mode table if built
-edit_buf:	.space	6	# Line editor buffer
-card_name:	.word	0	# Pointer to adapter name
-scanning:	.byte	0	# Performing mode scan
-do_restore:	.byte	0	# Screen contents altered during mode change
-svga_prefix:	.byte	VIDEO_FIRST_BIOS>>8	# Default prefix for BIOS modes
-graphic_mode:	.byte	0	# Graphic mode with a linear frame buffer
-dac_size:	.byte	6	# DAC bit depth
-vbe_version:	.word	0	# VBE bios version
-
-# Status messages
-keymsg:		.ascii	"Press <RETURN> to see video modes available, "
-		.ascii	"<SPACE> to continue or wait 30 secs"
-		.byte	0x0d, 0x0a, 0
-
-listhdr:	.byte	0x0d, 0x0a
-		.ascii	"Mode:    COLSxROWS:"
-
-crlft:		.byte	0x0d, 0x0a, 0
-
-prompt:		.byte	0x0d, 0x0a
-		.asciz	"Enter mode number or `scan': "
-
-unknt:		.asciz	"Unknown mode ID. Try again."
-
-badmdt:		.ascii	"You passed an undefined mode number."
-		.byte	0x0d, 0x0a, 0
-
-vesaer:		.ascii	"Error: Scanning of VESA modes failed. Please "
-		.ascii	"report to <mj@ucw.cz>."
-		.byte	0x0d, 0x0a, 0
-
-old_name:	.asciz	"CGA/MDA/HGA"
-
-ega_name:	.asciz	"EGA"
-
-svga_name:	.ascii	" "
-
-vga_name:	.asciz	"VGA"
-
-vesa_name:	.asciz	"VESA"
-
-name_bann:	.asciz	"Video adapter: "
-#endif /* CONFIG_VIDEO_SELECT */
-
-# Other variables:
-adapter:	.byte	0	# Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
-video_segment:	.word	0xb800	# Video memory segment
-force_size:	.word	0	# Use this size instead of the one in BIOS vars
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index b26378815b9..941a7e3aa5f 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Wed Mar  7 15:29:47 2007
+# Linux kernel version: 2.6.21-git3
+# Tue May  1 07:30:48 2007
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -118,11 +118,11 @@ CONFIG_X86_PC=y
 # CONFIG_X86_VSMP is not set
 # CONFIG_MK8 is not set
 # CONFIG_MPSC is not set
-# CONFIG_MCORE2 is not set
-CONFIG_GENERIC_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_MCORE2=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_TSC=y
 CONFIG_X86_GOOD_APIC=y
 # CONFIG_MICROCODE is not set
@@ -174,6 +174,7 @@ CONFIG_X86_MCE_INTEL=y
 CONFIG_X86_MCE_AMD=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_RELOCATABLE is not set
 CONFIG_PHYSICAL_START=0x200000
 CONFIG_SECCOMP=y
 # CONFIG_CC_STACKPROTECTOR is not set
@@ -182,7 +183,6 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_REORDER is not set
 CONFIG_K8_NB=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -218,7 +218,6 @@ CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_NUMA=y
 # CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_IBM is not set
 # CONFIG_ACPI_TOSHIBA is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
@@ -243,7 +242,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 
 #
 # CPUFreq processor drivers
@@ -299,7 +298,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -334,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
@@ -389,6 +388,13 @@ CONFIG_IPV6_SIT=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
 # CONFIG_IEEE80211 is not set
 
 #
@@ -409,10 +415,6 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
 
 #
@@ -459,6 +461,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -494,7 +497,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_BLK_DEV_RZ1000 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
@@ -525,7 +527,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -584,11 +585,9 @@ CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_ARCMSR is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=y
-CONFIG_MEGARAID_MAILBOX=y
+# CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
-CONFIG_MEGARAID_SAS=y
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -608,6 +607,7 @@ CONFIG_MEGARAID_SAS=y
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
 # CONFIG_SCSI_SRP is not set
 
 #
@@ -636,6 +636,7 @@ CONFIG_SATA_ACPI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -687,7 +688,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 # CONFIG_FUSION_FC is not set
-CONFIG_FUSION_SAS=y
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -700,19 +701,22 @@ CONFIG_IEEE1394=y
 # Subsystem Options
 #
 # CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
 
 #
-# Device Drivers
+# Controllers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
 #
-# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_OHCI1394=y
 
 #
-# Protocol Drivers
+# Protocols
 #
 # CONFIG_IEEE1394_VIDEO1394 is not set
 # CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
 # CONFIG_IEEE1394_ETH1394 is not set
 # CONFIG_IEEE1394_DV1394 is not set
 CONFIG_IEEE1394_RAWIO=y
@@ -775,7 +779,8 @@ CONFIG_TULIP=y
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
+CONFIG_AMD8111_ETH=y
+# CONFIG_AMD8111E_NAPI is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 CONFIG_B44=y
 CONFIG_FORCEDETH=y
@@ -837,9 +842,10 @@ CONFIG_S2IO=m
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
 # Wan interfaces
@@ -853,7 +859,6 @@ CONFIG_S2IO=m
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
 
@@ -987,57 +992,7 @@ CONFIG_HPET_MMAP=y
 #
 # I2C support
 #
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C is not set
 
 #
 # SPI support
@@ -1053,54 +1008,8 @@ CONFIG_I2C_ISA=m
 #
 # Hardware Monitoring support
 #
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Multifunction device drivers
@@ -1147,8 +1056,9 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
+CONFIG_OBSOLETE_OSS=y
 # CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_ES1371 is not set
 CONFIG_SOUND_ICH=y
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
@@ -1163,6 +1073,14 @@ CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 
 #
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1175,6 +1093,7 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -1225,10 +1144,6 @@ CONFIG_USB_STORAGE=y
 #
 # USB Input Devices
 #
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_ACECAD is not set
@@ -1556,7 +1471,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
+CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index 071100ea125..185399baaf6 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -5,6 +5,11 @@
  * This tricks binfmt_elf.c into loading 32bit binaries using lots 
  * of ugly preprocessor tricks. Talk about very very poor man's inheritance.
  */ 
+#define __ASM_X86_64_ELF_H 1
+
+#undef ELF_CLASS
+#define ELF_CLASS ELFCLASS32
+
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/rwsem.h>
@@ -50,9 +55,6 @@ struct elf_phdr;
 #undef ELF_ARCH
 #define ELF_ARCH EM_386
 
-#undef ELF_CLASS
-#define ELF_CLASS ELFCLASS32
-
 #define ELF_DATA	ELFDATA2LSB
 
 #define USE_ELF_CORE_DUMP 1
@@ -136,7 +138,7 @@ struct elf_prpsinfo
 
 #define user user32
 
-#define __ASM_X86_64_ELF_H 1
+#undef elf_read_implies_exec
 #define elf_read_implies_exec(ex, executable_stack)     (executable_stack != EXSTACK_DISABLE_X)
 //#include <asm/ia32.h>
 #include <linux/elf.h>
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index 796df6992f6..c48087db6f7 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -481,11 +481,7 @@ ia32_sys_call_table:
 	.quad sys_symlink
 	.quad sys_lstat
 	.quad sys_readlink		/* 85 */
-#ifdef CONFIG_IA32_AOUT
 	.quad sys_uselib
-#else
-	.quad quiet_ni_syscall
-#endif
 	.quad sys_swapon
 	.quad sys_reboot
 	.quad compat_sys_old_readdir
diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c
index 568ff0df89e..fc4419ff035 100644
--- a/arch/x86_64/ia32/syscall32.c
+++ b/arch/x86_64/ia32/syscall32.c
@@ -13,6 +13,7 @@
 #include <asm/proto.h>
 #include <asm/tlbflush.h>
 #include <asm/ia32_unistd.h>
+#include <asm/vsyscall32.h>
 
 extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
 extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index bb47e86f3d0..4d94c51803d 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -8,7 +8,8 @@ obj-y	:= process.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \
 		x8664_ksyms.o i387.o syscall.o vsyscall.o \
 		setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \
-		pci-dma.o pci-nommu.o alternative.o hpet.o tsc.o
+		pci-dma.o pci-nommu.o alternative.o hpet.o tsc.o bugs.o \
+		perfctr-watchdog.o
 
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_X86_MCE)		+= mce.o therm_throt.o
@@ -21,8 +22,7 @@ obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o trampoline.o tsc_sync.o
 obj-y				+= apic.o  nmi.o
-obj-y				+= io_apic.o mpparse.o \
-		genapic.o genapic_cluster.o genapic_flat.o
+obj-y				+= io_apic.o mpparse.o genapic.o genapic_flat.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= suspend.o
@@ -58,3 +58,4 @@ i8237-y				+= ../../i386/kernel/i8237.o
 msr-$(subst m,y,$(CONFIG_X86_MSR))  += ../../i386/kernel/msr.o
 alternative-y			+= ../../i386/kernel/alternative.o
 pcspeaker-y			+= ../../i386/kernel/pcspeaker.o
+perfctr-watchdog-y		+= ../../i386/kernel/cpu/perfctr-watchdog.o
diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c
index e1548fbe95a..195b7034a14 100644
--- a/arch/x86_64/kernel/acpi/sleep.c
+++ b/arch/x86_64/kernel/acpi/sleep.c
@@ -60,19 +60,6 @@ extern char wakeup_start, wakeup_end;
 
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 
-static pgd_t low_ptr;
-
-static void init_low_mapping(void)
-{
-	pgd_t *slot0 = pgd_offset(current->mm, 0UL);
-	low_ptr = *slot0;
-	/* FIXME: We're playing with the current task's page tables here, which
-	 * is potentially dangerous on SMP systems.
-	 */
-	set_pgd(slot0, *pgd_offset(current->mm, PAGE_OFFSET));
-	local_flush_tlb();
-}
-
 /**
  * acpi_save_state_mem - save kernel state
  *
@@ -81,8 +68,6 @@ static void init_low_mapping(void)
  */
 int acpi_save_state_mem(void)
 {
-	init_low_mapping();
-
 	memcpy((void *)acpi_wakeup_address, &wakeup_start,
 	       &wakeup_end - &wakeup_start);
 	acpi_copy_wakeup_routine(acpi_wakeup_address);
@@ -95,8 +80,6 @@ int acpi_save_state_mem(void)
  */
 void acpi_restore_state_mem(void)
 {
-	set_pgd(pgd_offset(current->mm, 0UL), low_ptr);
-	local_flush_tlb();
 }
 
 /**
@@ -109,10 +92,11 @@ void acpi_restore_state_mem(void)
  */
 void __init acpi_reserve_bootmem(void)
 {
-	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
-	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE)
+	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
+	if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE*2))
 		printk(KERN_CRIT
-		       "ACPI: Wakeup code way too big, will crash on attempt to suspend\n");
+		       "ACPI: Wakeup code way too big, will crash on attempt"
+		       " to suspend\n");
 }
 
 static int __init acpi_sleep_setup(char *str)
diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S
index 185faa911db..8550a6ffa27 100644
--- a/arch/x86_64/kernel/acpi/wakeup.S
+++ b/arch/x86_64/kernel/acpi/wakeup.S
@@ -1,6 +1,7 @@
 .text
 #include <linux/linkage.h>
 #include <asm/segment.h>
+#include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/msr.h>
 
@@ -30,22 +31,28 @@ wakeup_code:
 	cld
 	# setup data segment
 	movw	%cs, %ax
-	movw	%ax, %ds					# Make ds:0 point to wakeup_start
+	movw	%ax, %ds		# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
-	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
+					# Private stack is needed for ASUS board
+	mov	$(wakeup_stack - wakeup_code), %sp
 
-	pushl	$0						# Kill any dangerous flags
+	pushl	$0			# Kill any dangerous flags
 	popfl
 
 	movl	real_magic - wakeup_code, %eax
 	cmpl	$0x12345678, %eax
 	jne	bogus_real_magic
 
+  	call	verify_cpu			# Verify the cpu supports long
+						# mode
+	testl	%eax, %eax
+	jnz	no_longmode
+
 	testl	$1, video_flags - wakeup_code
 	jz	1f
 	lcall   $0xc000,$3
 	movw	%cs, %ax
-	movw	%ax, %ds					# Bios might have played with that
+	movw	%ax, %ds		# Bios might have played with that
 	movw	%ax, %ss
 1:
 
@@ -61,12 +68,15 @@ wakeup_code:
 
 	movb	$0xa2, %al	;  outb %al, $0x80
 	
-	lidt	%ds:idt_48a - wakeup_code
-	xorl	%eax, %eax
-	movw	%ds, %ax			# (Convert %ds:gdt to a linear ptr)
-	shll	$4, %eax
-	addl	$(gdta - wakeup_code), %eax
-	movl	%eax, gdt_48a +2 - wakeup_code
+	mov	%ds, %ax			# Find 32bit wakeup_code addr
+	movzx   %ax, %esi			# (Convert %ds:gdt to a liner ptr)
+	shll    $4, %esi
+						# Fix up the vectors
+	addl    %esi, wakeup_32_vector - wakeup_code
+	addl    %esi, wakeup_long64_vector - wakeup_code
+	addl    %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
+
+	lidtl	%ds:idt_48a - wakeup_code
 	lgdtl	%ds:gdt_48a - wakeup_code	# load gdt with whatever is
 						# appropriate
 
@@ -75,86 +85,63 @@ wakeup_code:
 	jmp	1f
 1:
 
-	.byte 0x66, 0xea			# prefix + jmpi-opcode
-	.long	wakeup_32 - __START_KERNEL_map
-	.word	__KERNEL_CS
+	ljmpl   *(wakeup_32_vector - wakeup_code)
+
+	.balign 4
+wakeup_32_vector:
+	.long   wakeup_32 - wakeup_code
+	.word   __KERNEL32_CS, 0
 
 	.code32
 wakeup_32:
 # Running in this code, but at low address; paging is not yet turned on.
 	movb	$0xa5, %al	;  outb %al, $0x80
 
-	/* Check if extended functions are implemented */		
-	movl	$0x80000000, %eax
-	cpuid
-	cmpl	$0x80000000, %eax
-	jbe	bogus_cpu
-	wbinvd
-	mov	$0x80000001, %eax
-	cpuid
-	btl	$29, %edx
-	jnc	bogus_cpu
-	movl	%edx,%edi
-	
-	movw	$__KERNEL_DS, %ax
-	movw	%ax, %ds
-	movw	%ax, %es
-	movw	%ax, %fs
-	movw	%ax, %gs
-
-	movw	$__KERNEL_DS, %ax	
-	movw	%ax, %ss
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
 
-	mov	$(wakeup_stack - __START_KERNEL_map), %esp
-	movl	saved_magic - __START_KERNEL_map, %eax
-	cmpl	$0x9abcdef0, %eax
-	jne	bogus_32_magic
+	movw	$0x0e00 + 'i', %ds:(0xb8012)
+	movb	$0xa8, %al	;  outb %al, $0x80;
 
 	/*
 	 * Prepare for entering 64bits mode
 	 */
 
-	/* Enable PAE mode and PGE */
+	/* Enable PAE */
 	xorl	%eax, %eax
 	btsl	$5, %eax
-	btsl	$7, %eax
 	movl	%eax, %cr4
 
 	/* Setup early boot stage 4 level pagetables */
-	movl	$(wakeup_level4_pgt - __START_KERNEL_map), %eax
+	leal    (wakeup_level4_pgt - wakeup_code)(%esi), %eax
 	movl	%eax, %cr3
 
-	/* Setup EFER (Extended Feature Enable Register) */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	/* Fool rdmsr and reset %eax to avoid dependences */
-	xorl	%eax, %eax
+        /* Check if nx is implemented */
+        movl    $0x80000001, %eax
+        cpuid
+        movl    %edx,%edi
+
 	/* Enable Long Mode */
+	xorl    %eax, %eax
 	btsl	$_EFER_LME, %eax
-	/* Enable System Call */
-	btsl	$_EFER_SCE, %eax
 
-	/* No Execute supported? */	
+	/* No Execute supported? */
 	btl	$20,%edi
 	jnc     1f
 	btsl	$_EFER_NX, %eax
-1:	
 				
 	/* Make changes effective */
+1:	movl    $MSR_EFER, %ecx
+	xorl    %edx, %edx
 	wrmsr
-	wbinvd
 
 	xorl	%eax, %eax
 	btsl	$31, %eax			/* Enable paging and in turn activate Long Mode */
 	btsl	$0, %eax			/* Enable protected mode */
-	btsl	$1, %eax			/* Enable MP */
-	btsl	$4, %eax			/* Enable ET */
-	btsl	$5, %eax			/* Enable NE */
-	btsl	$16, %eax			/* Enable WP */
-	btsl	$18, %eax			/* Enable AM */
 
 	/* Make changes effective */
 	movl	%eax, %cr0
+
 	/* At this point:
 		CR4.PAE must be 1
 		CS.L must be 0
@@ -162,11 +149,6 @@ wakeup_32:
 		Next instruction must be a branch
 		This must be on identity-mapped page
 	*/
-	jmp	reach_compatibility_mode
-reach_compatibility_mode:
-	movw	$0x0e00 + 'i', %ds:(0xb8012)
-	movb	$0xa8, %al	;  outb %al, $0x80; 	
-		
 	/*
 	 * At this point we're in long mode but in 32bit compatibility mode
 	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
@@ -174,24 +156,19 @@ reach_compatibility_mode:
 	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
 	 */
 
-	movw	$0x0e00 + 'n', %ds:(0xb8014)
-	movb	$0xa9, %al	;  outb %al, $0x80
-	
-	/* Load new GDT with the 64bit segment using 32bit descriptor */
-	movl	$(pGDT32 - __START_KERNEL_map), %eax
-	lgdt	(%eax)
-
-	movl    $(wakeup_jumpvector - __START_KERNEL_map), %eax
 	/* Finally jump in 64bit mode */
-	ljmp	*(%eax)
+        ljmp    *(wakeup_long64_vector - wakeup_code)(%esi)
 
-wakeup_jumpvector:
-	.long	wakeup_long64 - __START_KERNEL_map
-	.word	__KERNEL_CS
+	.balign 4
+wakeup_long64_vector:
+	.long   wakeup_long64 - wakeup_code
+	.word   __KERNEL_CS, 0
 
 .code64
 
-	/*	Hooray, we are in Long 64-bit mode (but still running in low memory) */
+	/* Hooray, we are in Long 64-bit mode (but still running in
+	 * low memory)
+	 */
 wakeup_long64:
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
@@ -199,7 +176,15 @@ wakeup_long64:
 	 * addresses where we're currently running on. We have to do that here
 	 * because in 32bit we couldn't load a 64bit linear address.
 	 */
-	lgdt	cpu_gdt_descr - __START_KERNEL_map
+	lgdt	cpu_gdt_descr
+
+	movw	$0x0e00 + 'n', %ds:(0xb8014)
+	movb	$0xa9, %al	;  outb %al, $0x80
+
+	movq    saved_magic, %rax
+	movq    $0x123456789abcdef0, %rdx
+	cmpq    %rdx, %rax
+	jne     bogus_64_magic
 
 	movw	$0x0e00 + 'u', %ds:(0xb8016)
 	
@@ -211,75 +196,58 @@ wakeup_long64:
 	movw	%ax, %es
 	movw	%ax, %fs
 	movw	%ax, %gs
-	movq	saved_esp, %rsp
+	movq	saved_rsp, %rsp
 
 	movw	$0x0e00 + 'x', %ds:(0xb8018)
-	movq	saved_ebx, %rbx
-	movq	saved_edi, %rdi
-	movq	saved_esi, %rsi
-	movq	saved_ebp, %rbp
+	movq	saved_rbx, %rbx
+	movq	saved_rdi, %rdi
+	movq	saved_rsi, %rsi
+	movq	saved_rbp, %rbp
 
 	movw	$0x0e00 + '!', %ds:(0xb801a)
-	movq	saved_eip, %rax
+	movq	saved_rip, %rax
 	jmp	*%rax
 
 .code32
 
 	.align	64	
 gdta:
+	/* Its good to keep gdt in sync with one in trampoline.S */
 	.word	0, 0, 0, 0			# dummy
-
-	.word	0, 0, 0, 0			# unused
-
-	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
-	.word	0				# base address = 0
-	.word	0x9B00				# code read/exec. ??? Why I need 0x9B00 (as opposed to 0x9A00 in order for this to work?)
-	.word	0x00CF				# granularity = 4096, 386
-						#  (+5th nibble of limit)
-
-	.word	0xFFFF				# 4Gb - (0x100000*0x1000 = 4Gb)
-	.word	0				# base address = 0
-	.word	0x9200				# data read/write
-	.word	0x00CF				# granularity = 4096, 386
-						#  (+5th nibble of limit)
-# this is 64bit descriptor for code
-	.word	0xFFFF
-	.word	0
-	.word	0x9A00				# code read/exec
-	.word	0x00AF				# as above, but it is long mode and with D=0
+	/* ??? Why I need the accessed bit set in order for this to work? */
+	.quad   0x00cf9b000000ffff              # __KERNEL32_CS
+	.quad   0x00af9b000000ffff              # __KERNEL_CS
+	.quad   0x00cf93000000ffff              # __KERNEL_DS
 
 idt_48a:
 	.word	0				# idt limit = 0
 	.word	0, 0				# idt base = 0L
 
 gdt_48a:
-	.word	0x8000				# gdt limit=2048,
+	.word	0x800				# gdt limit=2048,
 						#  256 GDT entries
-	.word	0, 0				# gdt base (filled in later)
-	
+	.long   gdta - wakeup_code              # gdt base (relocated in later)
 	
-real_save_gdt:	.word 0
-		.quad 0
 real_magic:	.quad 0
 video_mode:	.quad 0
 video_flags:	.quad 0
 
+.code16
 bogus_real_magic:
-	movb	$0xba,%al	;  outb %al,$0x80		
+	movb	$0xba,%al	;  outb %al,$0x80
 	jmp bogus_real_magic
 
-bogus_32_magic:
+.code64
+bogus_64_magic:
 	movb	$0xb3,%al	;  outb %al,$0x80
-	jmp bogus_32_magic
+	jmp bogus_64_magic
 
-bogus_31_magic:
-	movb	$0xb1,%al	;  outb %al,$0x80
-	jmp bogus_31_magic
-
-bogus_cpu:
-	movb	$0xbc,%al	;  outb %al,$0x80
-	jmp bogus_cpu
+.code16
+no_longmode:
+	movb    $0xbc,%al       ;  outb %al,$0x80
+	jmp no_longmode
 
+#include "../verify_cpu.S"
 	
 /* This code uses an extended set of video mode numbers. These include:
  * Aliases for standard modes
@@ -301,6 +269,7 @@ bogus_cpu:
 #define VIDEO_FIRST_V7 0x0900
 
 # Setting of user mode (AX=mode ID) => CF=success
+.code16
 mode_seta:
 	movw	%ax, %bx
 #if 0
@@ -346,21 +315,18 @@ check_vesaa:
 
 _setbada: jmp setbada
 
-	.code64
-bogus_magic:
-	movw	$0x0e00 + 'B', %ds:(0xb8018)
-	jmp bogus_magic
-
-bogus_magic2:
-	movw	$0x0e00 + '2', %ds:(0xb8018)
-	jmp bogus_magic2
-	
-
 wakeup_stack_begin:	# Stack grows down
 
 .org	0xff0
 wakeup_stack:		# Just below end of page
 
+.org   0x1000
+ENTRY(wakeup_level4_pgt)
+	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+	.fill   510,8,0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad   level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
+
 ENTRY(wakeup_end)
 	
 ##
@@ -373,28 +339,11 @@ ENTRY(wakeup_end)
 #
 # Returned address is location of code in low memory (past data and stack)
 #
+	.code64
 ENTRY(acpi_copy_wakeup_routine)
 	pushq	%rax
-	pushq	%rcx
 	pushq	%rdx
 
-	sgdt	saved_gdt
-	sidt	saved_idt
-	sldt	saved_ldt
-	str	saved_tss
-
-	movq    %cr3, %rdx
-	movq    %rdx, saved_cr3
-	movq    %cr4, %rdx
-	movq    %rdx, saved_cr4
-	movq	%cr0, %rdx
-	movq	%rdx, saved_cr0
-	sgdt    real_save_gdt - wakeup_start (,%rdi)
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	movl	%eax, saved_efer
-	movl	%edx, saved_efer2
-
 	movl	saved_video_mode, %edx
 	movl	%edx, video_mode - wakeup_start (,%rdi)
 	movl	acpi_video_flags, %edx
@@ -403,21 +352,13 @@ ENTRY(acpi_copy_wakeup_routine)
 	movq	$0x123456789abcdef0, %rdx
 	movq	%rdx, saved_magic
 
-	movl	saved_magic - __START_KERNEL_map, %eax
-	cmpl	$0x9abcdef0, %eax
-	jne	bogus_32_magic
-
-	# make sure %cr4 is set correctly (features, etc)
-	movl	saved_cr4 - __START_KERNEL_map, %eax
-	movq	%rax, %cr4
+	movq    saved_magic, %rax
+	movq    $0x123456789abcdef0, %rdx
+	cmpq    %rdx, %rax
+	jne     bogus_64_magic
 
-	movl	saved_cr0 - __START_KERNEL_map, %eax
-	movq	%rax, %cr0
-	jmp	1f		# Flush pipelines
-1:
 	# restore the regs we used
 	popq	%rdx
-	popq	%rcx
 	popq	%rax
 ENTRY(do_suspend_lowlevel_s4bios)
 	ret
@@ -450,13 +391,13 @@ do_suspend_lowlevel:
 	movq %r15, saved_context_r15(%rip)
 	pushfq ; popq saved_context_eflags(%rip)
 
-	movq	$.L97, saved_eip(%rip)
+	movq	$.L97, saved_rip(%rip)
 
-	movq %rsp,saved_esp
-	movq %rbp,saved_ebp
-	movq %rbx,saved_ebx
-	movq %rdi,saved_edi
-	movq %rsi,saved_esi
+	movq %rsp,saved_rsp
+	movq %rbp,saved_rbp
+	movq %rbx,saved_rbx
+	movq %rdi,saved_rdi
+	movq %rsi,saved_rsi
 
 	addq	$8, %rsp
 	movl	$3, %edi
@@ -503,25 +444,12 @@ do_suspend_lowlevel:
 	
 .data
 ALIGN
-ENTRY(saved_ebp)	.quad	0
-ENTRY(saved_esi)	.quad	0
-ENTRY(saved_edi)	.quad	0
-ENTRY(saved_ebx)	.quad	0
+ENTRY(saved_rbp)	.quad	0
+ENTRY(saved_rsi)	.quad	0
+ENTRY(saved_rdi)	.quad	0
+ENTRY(saved_rbx)	.quad	0
 
-ENTRY(saved_eip)	.quad	0
-ENTRY(saved_esp)	.quad	0
+ENTRY(saved_rip)	.quad	0
+ENTRY(saved_rsp)	.quad	0
 
 ENTRY(saved_magic)	.quad	0
-
-ALIGN
-# saved registers
-saved_gdt:	.quad	0,0
-saved_idt:	.quad	0,0
-saved_ldt:	.quad	0
-saved_tss:	.quad	0
-
-saved_cr0:	.quad 0
-saved_cr3:	.quad 0
-saved_cr4:	.quad 0
-saved_efer:	.quad 0
-saved_efer2:	.quad 0
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index b487396c4c5..a52af582059 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -51,7 +51,6 @@ static void __init insert_aperture_resource(u32 aper_base, u32 aper_size)
 
 static u32 __init allocate_aperture(void) 
 {
-	pg_data_t *nd0 = NODE_DATA(0);
 	u32 aper_size;
 	void *p; 
 
@@ -65,12 +64,12 @@ static u32 __init allocate_aperture(void)
 	 * Unfortunately we cannot move it up because that would make the
 	 * IOMMU useless.
 	 */
-	p = __alloc_bootmem_node(nd0, aper_size, aper_size, 0); 
+	p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk("Cannot allocate aperture memory hole (%p,%uK)\n",
 		       p, aper_size>>10);
 		if (p)
-			free_bootmem_node(nd0, __pa(p), aper_size); 
+			free_bootmem(__pa(p), aper_size);
 		return 0;
 	}
 	printk("Mapping aperture over %d KB of RAM @ %lx\n",
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index bd3e45d47c3..d198f7d82e5 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -68,6 +68,28 @@ int using_apic_timer __read_mostly = 0;
 
 static void apic_pm_activate(void);
 
+void apic_wait_icr_idle(void)
+{
+	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
+		cpu_relax();
+}
+
+unsigned int safe_apic_wait_icr_idle(void)
+{
+	unsigned int send_status;
+	int timeout;
+
+	timeout = 0;
+	do {
+		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
+		if (!send_status)
+			break;
+		udelay(100);
+	} while (timeout++ < 1000);
+
+	return send_status;
+}
+
 void enable_NMI_through_LVT0 (void * dummy)
 {
 	unsigned int v;
@@ -817,14 +839,15 @@ static void setup_APIC_timer(unsigned int clocks)
 
 static int __init calibrate_APIC_clock(void)
 {
-	int apic, apic_start, tsc, tsc_start;
+	unsigned apic, apic_start;
+	unsigned long tsc, tsc_start;
 	int result;
 	/*
 	 * Put whatever arbitrary (but long enough) timeout
 	 * value into the APIC clock, we just want to get the
 	 * counter running for calibration.
 	 */
-	__setup_APIC_LVTT(1000000000);
+	__setup_APIC_LVTT(4000000000);
 
 	apic_start = apic_read(APIC_TMCCT);
 #ifdef CONFIG_X86_PM_TIMER
@@ -835,15 +858,15 @@ static int __init calibrate_APIC_clock(void)
 	} else
 #endif
 	{
-		rdtscl(tsc_start);
+		rdtscll(tsc_start);
 
 		do {
 			apic = apic_read(APIC_TMCCT);
-			rdtscl(tsc);
+			rdtscll(tsc);
 		} while ((tsc - tsc_start) < TICK_COUNT &&
-				(apic - apic_start) < TICK_COUNT);
+				(apic_start - apic) < TICK_COUNT);
 
-		result = (apic_start - apic) * 1000L * cpu_khz /
+		result = (apic_start - apic) * 1000L * tsc_khz /
 					(tsc - tsc_start);
 	}
 	printk("result %d\n", result);
diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c
index 96687e2beb2..778953bc636 100644
--- a/arch/x86_64/kernel/asm-offsets.c
+++ b/arch/x86_64/kernel/asm-offsets.c
@@ -21,6 +21,14 @@
 
 #define BLANK() asm volatile("\n->" : : )
 
+#define __NO_STUBS 1
+#undef __SYSCALL
+#undef _ASM_X86_64_UNISTD_H_
+#define __SYSCALL(nr, sym) [nr] = 1,
+static char syscalls[] = {
+#include <asm/unistd.h>
+};
+
 int main(void)
 {
 #define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry))
@@ -71,5 +79,7 @@ int main(void)
 	DEFINE(TSS_ist, offsetof(struct tss_struct, ist));
 	BLANK();
 	DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
+	BLANK();
+	DEFINE(__NR_syscall_max, sizeof(syscalls) - 1);
 	return 0;
 }
diff --git a/arch/x86_64/kernel/bugs.c b/arch/x86_64/kernel/bugs.c
new file mode 100644
index 00000000000..12b585b5345
--- /dev/null
+++ b/arch/x86_64/kernel/bugs.c
@@ -0,0 +1,21 @@
+/*
+ *  arch/x86_64/kernel/bugs.c
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ *  Copyright (C) 2000  SuSE
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/alternative.h>
+#include <asm/processor.h>
+
+void __init check_bugs(void)
+{
+	identify_cpu(&boot_cpu_data);
+#if !defined(CONFIG_SMP)
+	printk("CPU: ");
+	print_cpu_info(&boot_cpu_data);
+#endif
+	alternative_instructions();
+}
diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86_64/kernel/cpufreq/Kconfig
index 40acb67fb88..c0749d2479f 100644
--- a/arch/x86_64/kernel/cpufreq/Kconfig
+++ b/arch/x86_64/kernel/cpufreq/Kconfig
@@ -16,6 +16,9 @@ config X86_POWERNOW_K8
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>. 
 
 	  If in doubt, say N.
@@ -38,6 +41,9 @@ config X86_SPEEDSTEP_CENTRINO
 	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
 	  or 64bit enabled Intel Xeons.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -55,6 +61,9 @@ config X86_ACPI_CPUFREQ
 	  Processor Performance States.
 	  This driver also supports Intel Enhanced Speedstep.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -62,7 +71,7 @@ config X86_ACPI_CPUFREQ
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
-        bool "/proc/acpi/processor/../performance interface (deprecated)"
+	bool "/proc/acpi/processor/../performance interface (deprecated)"
 	depends on PROC_FS
 	depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K8_ACPI
 	help
@@ -86,16 +95,18 @@ config X86_P4_CLOCKMOD
 	  slowdowns and noticeable latencies.  Normally Speedstep should be used
 	  instead.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  Unless you are absolutely sure say N.
 
 
 config X86_SPEEDSTEP_LIB
-        tristate
-        default X86_P4_CLOCKMOD
+	tristate
+	default X86_P4_CLOCKMOD
 
 endif
 
 endmenu
-
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index a490fabfcf4..13c6c37610e 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -17,6 +17,8 @@
 #include <linux/kexec.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/suspend.h>
+#include <linux/pfn.h>
 
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,7 +27,7 @@
 #include <asm/bootsetup.h>
 #include <asm/sections.h>
 
-struct e820map e820 __initdata;
+struct e820map e820;
 
 /* 
  * PFN of last memory page.
@@ -98,7 +100,7 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size)
  * This function checks if any part of the range <start,end> is mapped
  * with type.
  */
-int __meminit
+int
 e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
 { 
 	int i;
@@ -112,6 +114,7 @@ e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
 	} 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(e820_any_mapped);
 
 /*
  * This function checks if the entire range <start,end> is mapped with type.
@@ -255,22 +258,6 @@ void __init e820_reserve_resources(void)
 	}
 }
 
-/* Mark pages corresponding to given address range as nosave */
-static void __init
-e820_mark_nosave_range(unsigned long start, unsigned long end)
-{
-	unsigned long pfn, max_pfn;
-
-	if (start >= end)
-		return;
-
-	printk("Nosave address range: %016lx - %016lx\n", start, end);
-	max_pfn = end >> PAGE_SHIFT;
-	for (pfn = start >> PAGE_SHIFT; pfn < max_pfn; pfn++)
-		if (pfn_valid(pfn))
-			SetPageNosave(pfn_to_page(pfn));
-}
-
 /*
  * Find the ranges of physical addresses that do not correspond to
  * e820 RAM areas and mark the corresponding pages as nosave for software
@@ -289,13 +276,13 @@ void __init e820_mark_nosave_regions(void)
 		struct e820entry *ei = &e820.map[i];
 
 		if (paddr < ei->addr)
-			e820_mark_nosave_range(paddr,
-					round_up(ei->addr, PAGE_SIZE));
+			register_nosave_region(PFN_DOWN(paddr),
+						PFN_UP(ei->addr));
 
 		paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
 		if (ei->type != E820_RAM)
-			e820_mark_nosave_range(round_up(ei->addr, PAGE_SIZE),
-					paddr);
+			register_nosave_region(PFN_UP(ei->addr),
+						PFN_DOWN(paddr));
 
 		if (paddr >= (end_pfn << PAGE_SHIFT))
 			break;
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
index fede55a5399..990d9c218a5 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -71,18 +71,6 @@ static void __init ati_bugs(void)
 	}
 }
 
-static void intel_bugs(void)
-{
-	u16 device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
-
-#ifdef CONFIG_SMP
-	if (device == PCI_DEVICE_ID_INTEL_E7320_MCH ||
-	    device == PCI_DEVICE_ID_INTEL_E7520_MCH ||
-	    device == PCI_DEVICE_ID_INTEL_E7525_MCH)
-		quirk_intel_irqbalance();
-#endif
-}
-
 struct chipset {
 	u16 vendor;
 	void (*f)(void);
@@ -92,7 +80,6 @@ static struct chipset early_qrk[] __initdata = {
 	{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
 	{ PCI_VENDOR_ID_VIA, via_bugs },
 	{ PCI_VENDOR_ID_ATI, ati_bugs },
-	{ PCI_VENDOR_ID_INTEL, intel_bugs},
 	{}
 };
 
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
index 47b6d90349d..92213d2b7c1 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86_64/kernel/early_printk.c
@@ -11,11 +11,10 @@
 
 #ifdef __i386__
 #include <asm/setup.h>
-#define VGABASE		(__ISA_IO_base + 0xb8000)
 #else
 #include <asm/bootsetup.h>
-#define VGABASE		((void __iomem *)0xffffffff800b8000UL)
 #endif
+#define VGABASE		(__ISA_IO_base + 0xb8000)
 
 static int max_ypos = 25, max_xpos = 80;
 static int current_ypos = 25, current_xpos = 0;
@@ -176,7 +175,7 @@ static noinline long simnow(long cmd, long a, long b, long c)
 	return ret;
 }
 
-void __init simnow_init(char *str)
+static void __init simnow_init(char *str)
 {
 	char *fn = "klog";
 	if (*str == '=')
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index ed4350ced3d..fa984b53e7e 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -701,6 +701,7 @@ END(spurious_interrupt)
 	CFI_ADJUST_CFA_OFFSET 8
 	pushq %rax	/* push real oldrax to the rdi slot */ 
 	CFI_ADJUST_CFA_OFFSET 8
+	CFI_REL_OFFSET rax,0
 	leaq  \sym(%rip),%rax
 	jmp error_entry
 	CFI_ENDPROC
@@ -710,6 +711,7 @@ END(spurious_interrupt)
 	XCPT_FRAME
 	pushq %rax
 	CFI_ADJUST_CFA_OFFSET 8
+	CFI_REL_OFFSET rax,0
 	leaq  \sym(%rip),%rax
 	jmp error_entry
 	CFI_ENDPROC
@@ -817,6 +819,7 @@ paranoid_schedule\trace:
  */ 		  				
 KPROBE_ENTRY(error_entry)
 	_frame RDI
+	CFI_REL_OFFSET rax,0
 	/* rdi slot contains rax, oldrax contains error code */
 	cld	
 	subq  $14*8,%rsp
@@ -824,6 +827,7 @@ KPROBE_ENTRY(error_entry)
 	movq %rsi,13*8(%rsp)
 	CFI_REL_OFFSET	rsi,RSI
 	movq 14*8(%rsp),%rsi	/* load rax from rdi slot */
+	CFI_REGISTER	rax,rsi
 	movq %rdx,12*8(%rsp)
 	CFI_REL_OFFSET	rdx,RDX
 	movq %rcx,11*8(%rsp)
@@ -857,6 +861,7 @@ error_swapgs:
 	swapgs
 error_sti:	
 	movq %rdi,RDI(%rsp) 	
+	CFI_REL_OFFSET	rdi,RDI
 	movq %rsp,%rdi
 	movq ORIG_RAX(%rsp),%rsi	/* get error code */ 
 	movq $-1,ORIG_RAX(%rsp)
diff --git a/arch/x86_64/kernel/functionlist b/arch/x86_64/kernel/functionlist
deleted file mode 100644
index 7ae18ec1245..00000000000
--- a/arch/x86_64/kernel/functionlist
+++ /dev/null
@@ -1,1284 +0,0 @@
-*(.text.flush_thread)
-*(.text.check_poison_obj)
-*(.text.copy_page)
-*(.text.__set_personality)
-*(.text.gart_map_sg)
-*(.text.kmem_cache_free)
-*(.text.find_get_page)
-*(.text._raw_spin_lock)
-*(.text.ide_outb)
-*(.text.unmap_vmas)
-*(.text.copy_page_range)
-*(.text.kprobe_handler)
-*(.text.__handle_mm_fault)
-*(.text.__d_lookup)
-*(.text.copy_user_generic)
-*(.text.__link_path_walk)
-*(.text.get_page_from_freelist)
-*(.text.kmem_cache_alloc)
-*(.text.drive_cmd_intr)
-*(.text.ia32_setup_sigcontext)
-*(.text.huge_pte_offset)
-*(.text.do_page_fault)
-*(.text.page_remove_rmap)
-*(.text.release_pages)
-*(.text.ide_end_request)
-*(.text.__mutex_lock_slowpath)
-*(.text.__find_get_block)
-*(.text.kfree)
-*(.text.vfs_read)
-*(.text._raw_spin_unlock)
-*(.text.free_hot_cold_page)
-*(.text.fget_light)
-*(.text.schedule)
-*(.text.memcmp)
-*(.text.touch_atime)
-*(.text.__might_sleep)
-*(.text.__down_read_trylock)
-*(.text.arch_pick_mmap_layout)
-*(.text.find_vma)
-*(.text.__make_request)
-*(.text.do_generic_mapping_read)
-*(.text.mutex_lock_interruptible)
-*(.text.__generic_file_aio_read)
-*(.text._atomic_dec_and_lock)
-*(.text.__wake_up_bit)
-*(.text.add_to_page_cache)
-*(.text.cache_alloc_debugcheck_after)
-*(.text.vm_normal_page)
-*(.text.mutex_debug_check_no_locks_freed)
-*(.text.net_rx_action)
-*(.text.__find_first_zero_bit)
-*(.text.put_page)
-*(.text._raw_read_lock)
-*(.text.__delay)
-*(.text.dnotify_parent)
-*(.text.do_path_lookup)
-*(.text.do_sync_read)
-*(.text.do_lookup)
-*(.text.bit_waitqueue)
-*(.text.file_read_actor)
-*(.text.strncpy_from_user)
-*(.text.__pagevec_lru_add_active)
-*(.text.fget)
-*(.text.dput)
-*(.text.__strnlen_user)
-*(.text.inotify_inode_queue_event)
-*(.text.rw_verify_area)
-*(.text.ide_intr)
-*(.text.inotify_dentry_parent_queue_event)
-*(.text.permission)
-*(.text.memscan)
-*(.text.hpet_rtc_interrupt)
-*(.text.do_mmap_pgoff)
-*(.text.current_fs_time)
-*(.text.vfs_getattr)
-*(.text.kmem_flagcheck)
-*(.text.mark_page_accessed)
-*(.text.free_pages_and_swap_cache)
-*(.text.generic_fillattr)
-*(.text.__block_prepare_write)
-*(.text.__set_page_dirty_nobuffers)
-*(.text.link_path_walk)
-*(.text.find_get_pages_tag)
-*(.text.ide_do_request)
-*(.text.__alloc_pages)
-*(.text.generic_permission)
-*(.text.mod_page_state_offset)
-*(.text.free_pgd_range)
-*(.text.generic_file_buffered_write)
-*(.text.number)
-*(.text.ide_do_rw_disk)
-*(.text.__brelse)
-*(.text.__mod_page_state_offset)
-*(.text.rotate_reclaimable_page)
-*(.text.find_vma_prepare)
-*(.text.find_vma_prev)
-*(.text.lru_cache_add_active)
-*(.text.__kmalloc_track_caller)
-*(.text.smp_invalidate_interrupt)
-*(.text.handle_IRQ_event)
-*(.text.__find_get_block_slow)
-*(.text.do_wp_page)
-*(.text.do_select)
-*(.text.set_user_nice)
-*(.text.sys_read)
-*(.text.do_munmap)
-*(.text.csum_partial)
-*(.text.__do_softirq)
-*(.text.may_open)
-*(.text.getname)
-*(.text.get_empty_filp)
-*(.text.__fput)
-*(.text.remove_mapping)
-*(.text.filp_ctor)
-*(.text.poison_obj)
-*(.text.unmap_region)
-*(.text.test_set_page_writeback)
-*(.text.__do_page_cache_readahead)
-*(.text.sock_def_readable)
-*(.text.ide_outl)
-*(.text.shrink_zone)
-*(.text.rb_insert_color)
-*(.text.get_request)
-*(.text.sys_pread64)
-*(.text.spin_bug)
-*(.text.ide_outsl)
-*(.text.mask_and_ack_8259A)
-*(.text.filemap_nopage)
-*(.text.page_add_file_rmap)
-*(.text.find_lock_page)
-*(.text.tcp_poll)
-*(.text.__mark_inode_dirty)
-*(.text.file_ra_state_init)
-*(.text.generic_file_llseek)
-*(.text.__pagevec_lru_add)
-*(.text.page_cache_readahead)
-*(.text.n_tty_receive_buf)
-*(.text.zonelist_policy)
-*(.text.vma_adjust)
-*(.text.test_clear_page_dirty)
-*(.text.sync_buffer)
-*(.text.do_exit)
-*(.text.__bitmap_weight)
-*(.text.alloc_pages_current)
-*(.text.get_unused_fd)
-*(.text.zone_watermark_ok)
-*(.text.cpuset_update_task_memory_state)
-*(.text.__bitmap_empty)
-*(.text.sys_munmap)
-*(.text.__inode_dir_notify)
-*(.text.__generic_file_aio_write_nolock)
-*(.text.__pte_alloc)
-*(.text.sys_select)
-*(.text.vm_acct_memory)
-*(.text.vfs_write)
-*(.text.__lru_add_drain)
-*(.text.prio_tree_insert)
-*(.text.generic_file_aio_read)
-*(.text.vma_merge)
-*(.text.block_write_full_page)
-*(.text.__page_set_anon_rmap)
-*(.text.apic_timer_interrupt)
-*(.text.release_console_sem)
-*(.text.sys_write)
-*(.text.sys_brk)
-*(.text.dup_mm)
-*(.text.read_current_timer)
-*(.text.ll_rw_block)
-*(.text.blk_rq_map_sg)
-*(.text.dbg_userword)
-*(.text.__block_commit_write)
-*(.text.cache_grow)
-*(.text.copy_strings)
-*(.text.release_task)
-*(.text.do_sync_write)
-*(.text.unlock_page)
-*(.text.load_elf_binary)
-*(.text.__follow_mount)
-*(.text.__getblk)
-*(.text.do_sys_open)
-*(.text.current_kernel_time)
-*(.text.call_rcu)
-*(.text.write_chan)
-*(.text.vsnprintf)
-*(.text.dummy_inode_setsecurity)
-*(.text.submit_bh)
-*(.text.poll_freewait)
-*(.text.bio_alloc_bioset)
-*(.text.skb_clone)
-*(.text.page_waitqueue)
-*(.text.__mutex_lock_interruptible_slowpath)
-*(.text.get_index)
-*(.text.csum_partial_copy_generic)
-*(.text.bad_range)
-*(.text.remove_vma)
-*(.text.cp_new_stat)
-*(.text.alloc_arraycache)
-*(.text.test_clear_page_writeback)
-*(.text.strsep)
-*(.text.open_namei)
-*(.text._raw_read_unlock)
-*(.text.get_vma_policy)
-*(.text.__down_write_trylock)
-*(.text.find_get_pages)
-*(.text.tcp_rcv_established)
-*(.text.generic_make_request)
-*(.text.__block_write_full_page)
-*(.text.cfq_set_request)
-*(.text.sys_inotify_init)
-*(.text.split_vma)
-*(.text.__mod_timer)
-*(.text.get_options)
-*(.text.vma_link)
-*(.text.mpage_writepages)
-*(.text.truncate_complete_page)
-*(.text.tcp_recvmsg)
-*(.text.sigprocmask)
-*(.text.filemap_populate)
-*(.text.sys_close)
-*(.text.inotify_dev_queue_event)
-*(.text.do_task_stat)
-*(.text.__dentry_open)
-*(.text.unlink_file_vma)
-*(.text.__pollwait)
-*(.text.packet_rcv_spkt)
-*(.text.drop_buffers)
-*(.text.free_pgtables)
-*(.text.generic_file_direct_write)
-*(.text.copy_process)
-*(.text.netif_receive_skb)
-*(.text.dnotify_flush)
-*(.text.print_bad_pte)
-*(.text.anon_vma_unlink)
-*(.text.sys_mprotect)
-*(.text.sync_sb_inodes)
-*(.text.find_inode_fast)
-*(.text.dummy_inode_readlink)
-*(.text.putname)
-*(.text.init_smp_flush)
-*(.text.dbg_redzone2)
-*(.text.sk_run_filter)
-*(.text.may_expand_vm)
-*(.text.generic_file_aio_write)
-*(.text.find_next_zero_bit)
-*(.text.file_kill)
-*(.text.audit_getname)
-*(.text.arch_unmap_area_topdown)
-*(.text.alloc_page_vma)
-*(.text.tcp_transmit_skb)
-*(.text.rb_next)
-*(.text.dbg_redzone1)
-*(.text.generic_file_mmap)
-*(.text.vfs_fstat)
-*(.text.sys_time)
-*(.text.page_lock_anon_vma)
-*(.text.get_unmapped_area)
-*(.text.remote_llseek)
-*(.text.__up_read)
-*(.text.fd_install)
-*(.text.eventpoll_init_file)
-*(.text.dma_alloc_coherent)
-*(.text.create_empty_buffers)
-*(.text.__mutex_unlock_slowpath)
-*(.text.dup_fd)
-*(.text.d_alloc)
-*(.text.tty_ldisc_try)
-*(.text.sys_stime)
-*(.text.__rb_rotate_right)
-*(.text.d_validate)
-*(.text.rb_erase)
-*(.text.path_release)
-*(.text.memmove)
-*(.text.invalidate_complete_page)
-*(.text.clear_inode)
-*(.text.cache_estimate)
-*(.text.alloc_buffer_head)
-*(.text.smp_call_function_interrupt)
-*(.text.flush_tlb_others)
-*(.text.file_move)
-*(.text.balance_dirty_pages_ratelimited)
-*(.text.vma_prio_tree_add)
-*(.text.timespec_trunc)
-*(.text.mempool_alloc)
-*(.text.iget_locked)
-*(.text.d_alloc_root)
-*(.text.cpuset_populate_dir)
-*(.text.anon_vma_prepare)
-*(.text.sys_newstat)
-*(.text.alloc_page_interleave)
-*(.text.__path_lookup_intent_open)
-*(.text.__pagevec_free)
-*(.text.inode_init_once)
-*(.text.free_vfsmnt)
-*(.text.__user_walk_fd)
-*(.text.cfq_idle_slice_timer)
-*(.text.sys_mmap)
-*(.text.sys_llseek)
-*(.text.prio_tree_remove)
-*(.text.filp_close)
-*(.text.file_permission)
-*(.text.vma_prio_tree_remove)
-*(.text.tcp_ack)
-*(.text.nameidata_to_filp)
-*(.text.sys_lseek)
-*(.text.percpu_counter_mod)
-*(.text.igrab)
-*(.text.__bread)
-*(.text.alloc_inode)
-*(.text.filldir)
-*(.text.__rb_rotate_left)
-*(.text.irq_affinity_write_proc)
-*(.text.init_request_from_bio)
-*(.text.find_or_create_page)
-*(.text.tty_poll)
-*(.text.tcp_sendmsg)
-*(.text.ide_wait_stat)
-*(.text.free_buffer_head)
-*(.text.flush_signal_handlers)
-*(.text.tcp_v4_rcv)
-*(.text.nr_blockdev_pages)
-*(.text.locks_remove_flock)
-*(.text.__iowrite32_copy)
-*(.text.do_filp_open)
-*(.text.try_to_release_page)
-*(.text.page_add_new_anon_rmap)
-*(.text.kmem_cache_size)
-*(.text.eth_type_trans)
-*(.text.try_to_free_buffers)
-*(.text.schedule_tail)
-*(.text.proc_lookup)
-*(.text.no_llseek)
-*(.text.kfree_skbmem)
-*(.text.do_wait)
-*(.text.do_mpage_readpage)
-*(.text.vfs_stat_fd)
-*(.text.tty_write)
-*(.text.705)
-*(.text.sync_page)
-*(.text.__remove_shared_vm_struct)
-*(.text.__kfree_skb)
-*(.text.sock_poll)
-*(.text.get_request_wait)
-*(.text.do_sigaction)
-*(.text.do_brk)
-*(.text.tcp_event_data_recv)
-*(.text.read_chan)
-*(.text.pipe_writev)
-*(.text.__emul_lookup_dentry)
-*(.text.rtc_get_rtc_time)
-*(.text.print_objinfo)
-*(.text.file_update_time)
-*(.text.do_signal)
-*(.text.disable_8259A_irq)
-*(.text.blk_queue_bounce)
-*(.text.__anon_vma_link)
-*(.text.__vma_link)
-*(.text.vfs_rename)
-*(.text.sys_newlstat)
-*(.text.sys_newfstat)
-*(.text.sys_mknod)
-*(.text.__show_regs)
-*(.text.iput)
-*(.text.get_signal_to_deliver)
-*(.text.flush_tlb_page)
-*(.text.debug_mutex_wake_waiter)
-*(.text.copy_thread)
-*(.text.clear_page_dirty_for_io)
-*(.text.buffer_io_error)
-*(.text.vfs_permission)
-*(.text.truncate_inode_pages_range)
-*(.text.sys_recvfrom)
-*(.text.remove_suid)
-*(.text.mark_buffer_dirty)
-*(.text.local_bh_enable)
-*(.text.get_zeroed_page)
-*(.text.get_vmalloc_info)
-*(.text.flush_old_exec)
-*(.text.dummy_inode_permission)
-*(.text.__bio_add_page)
-*(.text.prio_tree_replace)
-*(.text.notify_change)
-*(.text.mntput_no_expire)
-*(.text.fput)
-*(.text.__end_that_request_first)
-*(.text.wake_up_bit)
-*(.text.unuse_mm)
-*(.text.shrink_icache_memory)
-*(.text.sched_balance_self)
-*(.text.__pmd_alloc)
-*(.text.pipe_poll)
-*(.text.normal_poll)
-*(.text.__free_pages)
-*(.text.follow_mount)
-*(.text.cdrom_start_packet_command)
-*(.text.blk_recount_segments)
-*(.text.bio_put)
-*(.text.__alloc_skb)
-*(.text.__wake_up)
-*(.text.vm_stat_account)
-*(.text.sys_fcntl)
-*(.text.sys_fadvise64)
-*(.text._raw_write_unlock)
-*(.text.__pud_alloc)
-*(.text.alloc_page_buffers)
-*(.text.vfs_llseek)
-*(.text.sockfd_lookup)
-*(.text._raw_write_lock)
-*(.text.put_compound_page)
-*(.text.prune_dcache)
-*(.text.pipe_readv)
-*(.text.mempool_free)
-*(.text.make_ahead_window)
-*(.text.lru_add_drain)
-*(.text.constant_test_bit)
-*(.text.__clear_user)
-*(.text.arch_unmap_area)
-*(.text.anon_vma_link)
-*(.text.sys_chroot)
-*(.text.setup_arg_pages)
-*(.text.radix_tree_preload)
-*(.text.init_rwsem)
-*(.text.generic_osync_inode)
-*(.text.generic_delete_inode)
-*(.text.do_sys_poll)
-*(.text.dev_queue_xmit)
-*(.text.default_llseek)
-*(.text.__writeback_single_inode)
-*(.text.vfs_ioctl)
-*(.text.__up_write)
-*(.text.unix_poll)
-*(.text.sys_rt_sigprocmask)
-*(.text.sock_recvmsg)
-*(.text.recalc_bh_state)
-*(.text.__put_unused_fd)
-*(.text.process_backlog)
-*(.text.locks_remove_posix)
-*(.text.lease_modify)
-*(.text.expand_files)
-*(.text.end_buffer_read_nobh)
-*(.text.d_splice_alias)
-*(.text.debug_mutex_init_waiter)
-*(.text.copy_from_user)
-*(.text.cap_vm_enough_memory)
-*(.text.show_vfsmnt)
-*(.text.release_sock)
-*(.text.pfifo_fast_enqueue)
-*(.text.half_md4_transform)
-*(.text.fs_may_remount_ro)
-*(.text.do_fork)
-*(.text.copy_hugetlb_page_range)
-*(.text.cache_free_debugcheck)
-*(.text.__tcp_select_window)
-*(.text.task_handoff_register)
-*(.text.sys_open)
-*(.text.strlcpy)
-*(.text.skb_copy_datagram_iovec)
-*(.text.set_up_list3s)
-*(.text.release_open_intent)
-*(.text.qdisc_restart)
-*(.text.n_tty_chars_in_buffer)
-*(.text.inode_change_ok)
-*(.text.__downgrade_write)
-*(.text.debug_mutex_unlock)
-*(.text.add_timer_randomness)
-*(.text.sock_common_recvmsg)
-*(.text.set_bh_page)
-*(.text.printk_lock)
-*(.text.path_release_on_umount)
-*(.text.ip_output)
-*(.text.ide_build_dmatable)
-*(.text.__get_user_8)
-*(.text.end_buffer_read_sync)
-*(.text.__d_path)
-*(.text.d_move)
-*(.text.del_timer)
-*(.text.constant_test_bit)
-*(.text.blockable_page_cache_readahead)
-*(.text.tty_read)
-*(.text.sys_readlink)
-*(.text.sys_faccessat)
-*(.text.read_swap_cache_async)
-*(.text.pty_write_room)
-*(.text.page_address_in_vma)
-*(.text.kthread)
-*(.text.cfq_exit_io_context)
-*(.text.__tcp_push_pending_frames)
-*(.text.sys_pipe)
-*(.text.submit_bio)
-*(.text.pid_revalidate)
-*(.text.page_referenced_file)
-*(.text.lock_sock)
-*(.text.get_page_state_node)
-*(.text.generic_block_bmap)
-*(.text.do_setitimer)
-*(.text.dev_queue_xmit_nit)
-*(.text.copy_from_read_buf)
-*(.text.__const_udelay)
-*(.text.console_conditional_schedule)
-*(.text.wake_up_new_task)
-*(.text.wait_for_completion_interruptible)
-*(.text.tcp_rcv_rtt_update)
-*(.text.sys_mlockall)
-*(.text.set_fs_altroot)
-*(.text.schedule_timeout)
-*(.text.nr_free_pagecache_pages)
-*(.text.nf_iterate)
-*(.text.mapping_tagged)
-*(.text.ip_queue_xmit)
-*(.text.ip_local_deliver)
-*(.text.follow_page)
-*(.text.elf_map)
-*(.text.dummy_file_permission)
-*(.text.dispose_list)
-*(.text.dentry_open)
-*(.text.dentry_iput)
-*(.text.bio_alloc)
-*(.text.wait_on_page_bit)
-*(.text.vfs_readdir)
-*(.text.vfs_lstat)
-*(.text.seq_escape)
-*(.text.__posix_lock_file)
-*(.text.mm_release)
-*(.text.kref_put)
-*(.text.ip_rcv)
-*(.text.__iget)
-*(.text.free_pages)
-*(.text.find_mergeable_anon_vma)
-*(.text.find_extend_vma)
-*(.text.dummy_inode_listsecurity)
-*(.text.bio_add_page)
-*(.text.__vm_enough_memory)
-*(.text.vfs_stat)
-*(.text.tty_paranoia_check)
-*(.text.tcp_read_sock)
-*(.text.tcp_data_queue)
-*(.text.sys_uname)
-*(.text.sys_renameat)
-*(.text.__strncpy_from_user)
-*(.text.__mutex_init)
-*(.text.__lookup_hash)
-*(.text.kref_get)
-*(.text.ip_route_input)
-*(.text.__insert_inode_hash)
-*(.text.do_sock_write)
-*(.text.blk_done_softirq)
-*(.text.__wake_up_sync)
-*(.text.__vma_link_rb)
-*(.text.tty_ioctl)
-*(.text.tracesys)
-*(.text.sys_getdents)
-*(.text.sys_dup)
-*(.text.stub_execve)
-*(.text.sha_transform)
-*(.text.radix_tree_tag_clear)
-*(.text.put_unused_fd)
-*(.text.put_files_struct)
-*(.text.mpage_readpages)
-*(.text.may_delete)
-*(.text.kmem_cache_create)
-*(.text.ip_mc_output)
-*(.text.interleave_nodes)
-*(.text.groups_search)
-*(.text.generic_drop_inode)
-*(.text.generic_commit_write)
-*(.text.fcntl_setlk)
-*(.text.exit_mmap)
-*(.text.end_page_writeback)
-*(.text.__d_rehash)
-*(.text.debug_mutex_free_waiter)
-*(.text.csum_ipv6_magic)
-*(.text.count)
-*(.text.cleanup_rbuf)
-*(.text.check_spinlock_acquired_node)
-*(.text.can_vma_merge_after)
-*(.text.bio_endio)
-*(.text.alloc_pidmap)
-*(.text.write_ldt)
-*(.text.vmtruncate_range)
-*(.text.vfs_create)
-*(.text.__user_walk)
-*(.text.update_send_head)
-*(.text.unmap_underlying_metadata)
-*(.text.tty_ldisc_deref)
-*(.text.tcp_setsockopt)
-*(.text.tcp_send_ack)
-*(.text.sys_pause)
-*(.text.sys_gettimeofday)
-*(.text.sync_dirty_buffer)
-*(.text.strncmp)
-*(.text.release_posix_timer)
-*(.text.proc_file_read)
-*(.text.prepare_to_wait)
-*(.text.locks_mandatory_locked)
-*(.text.interruptible_sleep_on_timeout)
-*(.text.inode_sub_bytes)
-*(.text.in_group_p)
-*(.text.hrtimer_try_to_cancel)
-*(.text.filldir64)
-*(.text.fasync_helper)
-*(.text.dummy_sb_pivotroot)
-*(.text.d_lookup)
-*(.text.d_instantiate)
-*(.text.__d_find_alias)
-*(.text.cpu_idle_wait)
-*(.text.cond_resched_lock)
-*(.text.chown_common)
-*(.text.blk_congestion_wait)
-*(.text.activate_page)
-*(.text.unlock_buffer)
-*(.text.tty_wakeup)
-*(.text.tcp_v4_do_rcv)
-*(.text.tcp_current_mss)
-*(.text.sys_openat)
-*(.text.sys_fchdir)
-*(.text.strnlen_user)
-*(.text.strnlen)
-*(.text.strchr)
-*(.text.sock_common_getsockopt)
-*(.text.skb_checksum)
-*(.text.remove_wait_queue)
-*(.text.rb_replace_node)
-*(.text.radix_tree_node_ctor)
-*(.text.pty_chars_in_buffer)
-*(.text.profile_hit)
-*(.text.prio_tree_left)
-*(.text.pgd_clear_bad)
-*(.text.pfifo_fast_dequeue)
-*(.text.page_referenced)
-*(.text.open_exec)
-*(.text.mmput)
-*(.text.mm_init)
-*(.text.__ide_dma_off_quietly)
-*(.text.ide_dma_intr)
-*(.text.hrtimer_start)
-*(.text.get_io_context)
-*(.text.__get_free_pages)
-*(.text.find_first_zero_bit)
-*(.text.file_free_rcu)
-*(.text.dummy_socket_sendmsg)
-*(.text.do_unlinkat)
-*(.text.do_arch_prctl)
-*(.text.destroy_inode)
-*(.text.can_vma_merge_before)
-*(.text.block_sync_page)
-*(.text.block_prepare_write)
-*(.text.bio_init)
-*(.text.arch_ptrace)
-*(.text.wake_up_inode)
-*(.text.wait_on_retry_sync_kiocb)
-*(.text.vma_prio_tree_next)
-*(.text.tcp_rcv_space_adjust)
-*(.text.__tcp_ack_snd_check)
-*(.text.sys_utime)
-*(.text.sys_recvmsg)
-*(.text.sys_mremap)
-*(.text.sys_bdflush)
-*(.text.sleep_on)
-*(.text.set_page_dirty_lock)
-*(.text.seq_path)
-*(.text.schedule_timeout_interruptible)
-*(.text.sched_fork)
-*(.text.rt_run_flush)
-*(.text.profile_munmap)
-*(.text.prepare_binprm)
-*(.text.__pagevec_release_nonlru)
-*(.text.m_show)
-*(.text.lookup_mnt)
-*(.text.__lookup_mnt)
-*(.text.lock_timer_base)
-*(.text.is_subdir)
-*(.text.invalidate_bh_lru)
-*(.text.init_buffer_head)
-*(.text.ifind_fast)
-*(.text.ide_dma_start)
-*(.text.__get_page_state)
-*(.text.flock_to_posix_lock)
-*(.text.__find_symbol)
-*(.text.do_futex)
-*(.text.do_execve)
-*(.text.dirty_writeback_centisecs_handler)
-*(.text.dev_watchdog)
-*(.text.can_share_swap_page)
-*(.text.blkdev_put)
-*(.text.bio_get_nr_vecs)
-*(.text.xfrm_compile_policy)
-*(.text.vma_prio_tree_insert)
-*(.text.vfs_lstat_fd)
-*(.text.__user_path_lookup_open)
-*(.text.thread_return)
-*(.text.tcp_send_delayed_ack)
-*(.text.sock_def_error_report)
-*(.text.shrink_slab)
-*(.text.serial_out)
-*(.text.seq_read)
-*(.text.secure_ip_id)
-*(.text.search_binary_handler)
-*(.text.proc_pid_unhash)
-*(.text.pagevec_lookup)
-*(.text.new_inode)
-*(.text.memcpy_toiovec)
-*(.text.locks_free_lock)
-*(.text.__lock_page)
-*(.text.__lock_buffer)
-*(.text.load_module)
-*(.text.is_bad_inode)
-*(.text.invalidate_inode_buffers)
-*(.text.insert_vm_struct)
-*(.text.inode_setattr)
-*(.text.inode_add_bytes)
-*(.text.ide_read_24)
-*(.text.ide_get_error_location)
-*(.text.ide_do_drive_cmd)
-*(.text.get_locked_pte)
-*(.text.get_filesystem_list)
-*(.text.generic_file_open)
-*(.text.follow_down)
-*(.text.find_next_bit)
-*(.text.__find_first_bit)
-*(.text.exit_mm)
-*(.text.exec_keys)
-*(.text.end_buffer_write_sync)
-*(.text.end_bio_bh_io_sync)
-*(.text.dummy_socket_shutdown)
-*(.text.d_rehash)
-*(.text.d_path)
-*(.text.do_ioctl)
-*(.text.dget_locked)
-*(.text.copy_thread_group_keys)
-*(.text.cdrom_end_request)
-*(.text.cap_bprm_apply_creds)
-*(.text.blk_rq_bio_prep)
-*(.text.__bitmap_intersects)
-*(.text.bio_phys_segments)
-*(.text.bio_free)
-*(.text.arch_get_unmapped_area_topdown)
-*(.text.writeback_in_progress)
-*(.text.vfs_follow_link)
-*(.text.tcp_rcv_state_process)
-*(.text.tcp_check_space)
-*(.text.sys_stat)
-*(.text.sys_rt_sigreturn)
-*(.text.sys_rt_sigaction)
-*(.text.sys_remap_file_pages)
-*(.text.sys_pwrite64)
-*(.text.sys_fchownat)
-*(.text.sys_fchmodat)
-*(.text.strncat)
-*(.text.strlcat)
-*(.text.strcmp)
-*(.text.steal_locks)
-*(.text.sock_create)
-*(.text.sk_stream_rfree)
-*(.text.sk_stream_mem_schedule)
-*(.text.skip_atoi)
-*(.text.sk_alloc)
-*(.text.show_stat)
-*(.text.set_fs_pwd)
-*(.text.set_binfmt)
-*(.text.pty_unthrottle)
-*(.text.proc_symlink)
-*(.text.pipe_release)
-*(.text.pageout)
-*(.text.n_tty_write_wakeup)
-*(.text.n_tty_ioctl)
-*(.text.nr_free_zone_pages)
-*(.text.migration_thread)
-*(.text.mempool_free_slab)
-*(.text.meminfo_read_proc)
-*(.text.max_sane_readahead)
-*(.text.lru_cache_add)
-*(.text.kill_fasync)
-*(.text.kernel_read)
-*(.text.invalidate_mapping_pages)
-*(.text.inode_has_buffers)
-*(.text.init_once)
-*(.text.inet_sendmsg)
-*(.text.idedisk_issue_flush)
-*(.text.generic_file_write)
-*(.text.free_more_memory)
-*(.text.__free_fdtable)
-*(.text.filp_dtor)
-*(.text.exit_sem)
-*(.text.exit_itimers)
-*(.text.error_interrupt)
-*(.text.end_buffer_async_write)
-*(.text.eligible_child)
-*(.text.elf_map)
-*(.text.dump_task_regs)
-*(.text.dummy_task_setscheduler)
-*(.text.dummy_socket_accept)
-*(.text.dummy_file_free_security)
-*(.text.__down_read)
-*(.text.do_sock_read)
-*(.text.do_sigaltstack)
-*(.text.do_mremap)
-*(.text.current_io_context)
-*(.text.cpu_swap_callback)
-*(.text.copy_vma)
-*(.text.cap_bprm_set_security)
-*(.text.blk_insert_request)
-*(.text.bio_map_kern_endio)
-*(.text.bio_hw_segments)
-*(.text.bictcp_cong_avoid)
-*(.text.add_interrupt_randomness)
-*(.text.wait_for_completion)
-*(.text.version_read_proc)
-*(.text.unix_write_space)
-*(.text.tty_ldisc_ref_wait)
-*(.text.tty_ldisc_put)
-*(.text.try_to_wake_up)
-*(.text.tcp_v4_tw_remember_stamp)
-*(.text.tcp_try_undo_dsack)
-*(.text.tcp_may_send_now)
-*(.text.sys_waitid)
-*(.text.sys_sched_getparam)
-*(.text.sys_getppid)
-*(.text.sys_getcwd)
-*(.text.sys_dup2)
-*(.text.sys_chmod)
-*(.text.sys_chdir)
-*(.text.sprintf)
-*(.text.sock_wfree)
-*(.text.sock_aio_write)
-*(.text.skb_drop_fraglist)
-*(.text.skb_dequeue)
-*(.text.set_close_on_exec)
-*(.text.set_brk)
-*(.text.seq_puts)
-*(.text.SELECT_DRIVE)
-*(.text.sched_exec)
-*(.text.return_EIO)
-*(.text.remove_from_page_cache)
-*(.text.rcu_start_batch)
-*(.text.__put_task_struct)
-*(.text.proc_pid_readdir)
-*(.text.proc_get_inode)
-*(.text.prepare_to_wait_exclusive)
-*(.text.pipe_wait)
-*(.text.pipe_new)
-*(.text.pdflush_operation)
-*(.text.__pagevec_release)
-*(.text.pagevec_lookup_tag)
-*(.text.packet_rcv)
-*(.text.n_tty_set_room)
-*(.text.nr_free_pages)
-*(.text.__net_timestamp)
-*(.text.mpage_end_io_read)
-*(.text.mod_timer)
-*(.text.__memcpy)
-*(.text.mb_cache_shrink_fn)
-*(.text.lock_rename)
-*(.text.kstrdup)
-*(.text.is_ignored)
-*(.text.int_very_careful)
-*(.text.inotify_inode_is_dead)
-*(.text.inotify_get_cookie)
-*(.text.inode_get_bytes)
-*(.text.init_timer)
-*(.text.init_dev)
-*(.text.inet_getname)
-*(.text.ide_map_sg)
-*(.text.__ide_dma_end)
-*(.text.hrtimer_get_remaining)
-*(.text.get_task_mm)
-*(.text.get_random_int)
-*(.text.free_pipe_info)
-*(.text.filemap_write_and_wait_range)
-*(.text.exit_thread)
-*(.text.enter_idle)
-*(.text.end_that_request_first)
-*(.text.end_8259A_irq)
-*(.text.dummy_file_alloc_security)
-*(.text.do_group_exit)
-*(.text.debug_mutex_init)
-*(.text.cpuset_exit)
-*(.text.cpu_idle)
-*(.text.copy_semundo)
-*(.text.copy_files)
-*(.text.chrdev_open)
-*(.text.cdrom_transfer_packet_command)
-*(.text.cdrom_mode_sense)
-*(.text.blk_phys_contig_segment)
-*(.text.blk_get_queue)
-*(.text.bio_split)
-*(.text.audit_alloc)
-*(.text.anon_pipe_buf_release)
-*(.text.add_wait_queue_exclusive)
-*(.text.add_wait_queue)
-*(.text.acct_process)
-*(.text.account)
-*(.text.zeromap_page_range)
-*(.text.yield)
-*(.text.writeback_acquire)
-*(.text.worker_thread)
-*(.text.wait_on_page_writeback_range)
-*(.text.__wait_on_buffer)
-*(.text.vscnprintf)
-*(.text.vmalloc_to_pfn)
-*(.text.vgacon_save_screen)
-*(.text.vfs_unlink)
-*(.text.vfs_rmdir)
-*(.text.unregister_md_personality)
-*(.text.unlock_new_inode)
-*(.text.unix_stream_sendmsg)
-*(.text.unix_stream_recvmsg)
-*(.text.unhash_process)
-*(.text.udp_v4_lookup_longway)
-*(.text.tty_ldisc_flush)
-*(.text.tty_ldisc_enable)
-*(.text.tty_hung_up_p)
-*(.text.tty_buffer_free_all)
-*(.text.tso_fragment)
-*(.text.try_to_del_timer_sync)
-*(.text.tcp_v4_err)
-*(.text.tcp_unhash)
-*(.text.tcp_seq_next)
-*(.text.tcp_select_initial_window)
-*(.text.tcp_sacktag_write_queue)
-*(.text.tcp_cwnd_validate)
-*(.text.sys_vhangup)
-*(.text.sys_uselib)
-*(.text.sys_symlink)
-*(.text.sys_signal)
-*(.text.sys_poll)
-*(.text.sys_mount)
-*(.text.sys_kill)
-*(.text.sys_ioctl)
-*(.text.sys_inotify_add_watch)
-*(.text.sys_getuid)
-*(.text.sys_getrlimit)
-*(.text.sys_getitimer)
-*(.text.sys_getgroups)
-*(.text.sys_ftruncate)
-*(.text.sysfs_lookup)
-*(.text.sys_exit_group)
-*(.text.stub_fork)
-*(.text.sscanf)
-*(.text.sock_map_fd)
-*(.text.sock_get_timestamp)
-*(.text.__sock_create)
-*(.text.smp_call_function_single)
-*(.text.sk_stop_timer)
-*(.text.skb_copy_and_csum_datagram)
-*(.text.__skb_checksum_complete)
-*(.text.single_next)
-*(.text.sigqueue_alloc)
-*(.text.shrink_dcache_parent)
-*(.text.select_idle_routine)
-*(.text.run_workqueue)
-*(.text.run_local_timers)
-*(.text.remove_inode_hash)
-*(.text.remove_dquot_ref)
-*(.text.register_binfmt)
-*(.text.read_cache_pages)
-*(.text.rb_last)
-*(.text.pty_open)
-*(.text.proc_root_readdir)
-*(.text.proc_pid_flush)
-*(.text.proc_pident_lookup)
-*(.text.proc_fill_super)
-*(.text.proc_exe_link)
-*(.text.posix_locks_deadlock)
-*(.text.pipe_iov_copy_from_user)
-*(.text.opost)
-*(.text.nf_register_hook)
-*(.text.netif_rx_ni)
-*(.text.m_start)
-*(.text.mpage_writepage)
-*(.text.mm_alloc)
-*(.text.memory_open)
-*(.text.mark_buffer_async_write)
-*(.text.lru_add_drain_all)
-*(.text.locks_init_lock)
-*(.text.locks_delete_lock)
-*(.text.lock_hrtimer_base)
-*(.text.load_script)
-*(.text.__kill_fasync)
-*(.text.ip_mc_sf_allow)
-*(.text.__ioremap)
-*(.text.int_with_check)
-*(.text.int_sqrt)
-*(.text.install_thread_keyring)
-*(.text.init_page_buffers)
-*(.text.inet_sock_destruct)
-*(.text.idle_notifier_register)
-*(.text.ide_execute_command)
-*(.text.ide_end_drive_cmd)
-*(.text.__ide_dma_host_on)
-*(.text.hrtimer_run_queues)
-*(.text.hpet_mask_rtc_irq_bit)
-*(.text.__get_zone_counts)
-*(.text.get_zone_counts)
-*(.text.get_write_access)
-*(.text.get_fs_struct)
-*(.text.get_dirty_limits)
-*(.text.generic_readlink)
-*(.text.free_hot_page)
-*(.text.finish_wait)
-*(.text.find_inode)
-*(.text.find_first_bit)
-*(.text.__filemap_fdatawrite_range)
-*(.text.__filemap_copy_from_user_iovec)
-*(.text.exit_aio)
-*(.text.elv_set_request)
-*(.text.elv_former_request)
-*(.text.dup_namespace)
-*(.text.dupfd)
-*(.text.dummy_socket_getsockopt)
-*(.text.dummy_sb_post_mountroot)
-*(.text.dummy_quotactl)
-*(.text.dummy_inode_rename)
-*(.text.__do_SAK)
-*(.text.do_pipe)
-*(.text.do_fsync)
-*(.text.d_instantiate_unique)
-*(.text.d_find_alias)
-*(.text.deny_write_access)
-*(.text.dentry_unhash)
-*(.text.d_delete)
-*(.text.datagram_poll)
-*(.text.cpuset_fork)
-*(.text.cpuid_read)
-*(.text.copy_namespace)
-*(.text.cond_resched)
-*(.text.check_version)
-*(.text.__change_page_attr)
-*(.text.cfq_slab_kill)
-*(.text.cfq_completed_request)
-*(.text.cdrom_pc_intr)
-*(.text.cdrom_decode_status)
-*(.text.cap_capset_check)
-*(.text.blk_put_request)
-*(.text.bio_fs_destructor)
-*(.text.bictcp_min_cwnd)
-*(.text.alloc_chrdev_region)
-*(.text.add_element)
-*(.text.acct_update_integrals)
-*(.text.write_boundary_block)
-*(.text.writeback_release)
-*(.text.writeback_inodes)
-*(.text.wake_up_state)
-*(.text.__wake_up_locked)
-*(.text.wake_futex)
-*(.text.wait_task_inactive)
-*(.text.__wait_on_freeing_inode)
-*(.text.wait_noreap_copyout)
-*(.text.vmstat_start)
-*(.text.vgacon_do_font_op)
-*(.text.vfs_readv)
-*(.text.vfs_quota_sync)
-*(.text.update_queue)
-*(.text.unshare_files)
-*(.text.unmap_vm_area)
-*(.text.unix_socketpair)
-*(.text.unix_release_sock)
-*(.text.unix_detach_fds)
-*(.text.unix_create1)
-*(.text.unix_bind)
-*(.text.udp_sendmsg)
-*(.text.udp_rcv)
-*(.text.udp_queue_rcv_skb)
-*(.text.uart_write)
-*(.text.uart_startup)
-*(.text.uart_open)
-*(.text.tty_vhangup)
-*(.text.tty_termios_baud_rate)
-*(.text.tty_release)
-*(.text.tty_ldisc_ref)
-*(.text.throttle_vm_writeout)
-*(.text.058)
-*(.text.tcp_xmit_probe_skb)
-*(.text.tcp_v4_send_check)
-*(.text.tcp_v4_destroy_sock)
-*(.text.tcp_sync_mss)
-*(.text.tcp_snd_test)
-*(.text.tcp_slow_start)
-*(.text.tcp_send_fin)
-*(.text.tcp_rtt_estimator)
-*(.text.tcp_parse_options)
-*(.text.tcp_ioctl)
-*(.text.tcp_init_tso_segs)
-*(.text.tcp_init_cwnd)
-*(.text.tcp_getsockopt)
-*(.text.tcp_fin)
-*(.text.tcp_connect)
-*(.text.tcp_cong_avoid)
-*(.text.__tcp_checksum_complete_user)
-*(.text.task_dumpable)
-*(.text.sys_wait4)
-*(.text.sys_utimes)
-*(.text.sys_symlinkat)
-*(.text.sys_socketpair)
-*(.text.sys_rmdir)
-*(.text.sys_readahead)
-*(.text.sys_nanosleep)
-*(.text.sys_linkat)
-*(.text.sys_fstat)
-*(.text.sysfs_readdir)
-*(.text.sys_execve)
-*(.text.sysenter_tracesys)
-*(.text.sys_chown)
-*(.text.stub_clone)
-*(.text.strrchr)
-*(.text.strncpy)
-*(.text.stopmachine_set_state)
-*(.text.sock_sendmsg)
-*(.text.sock_release)
-*(.text.sock_fasync)
-*(.text.sock_close)
-*(.text.sk_stream_write_space)
-*(.text.sk_reset_timer)
-*(.text.skb_split)
-*(.text.skb_recv_datagram)
-*(.text.skb_queue_tail)
-*(.text.sk_attach_filter)
-*(.text.si_swapinfo)
-*(.text.simple_strtoll)
-*(.text.set_termios)
-*(.text.set_task_comm)
-*(.text.set_shrinker)
-*(.text.set_normalized_timespec)
-*(.text.set_brk)
-*(.text.serial_in)
-*(.text.seq_printf)
-*(.text.secure_dccp_sequence_number)
-*(.text.rwlock_bug)
-*(.text.rt_hash_code)
-*(.text.__rta_fill)
-*(.text.__request_resource)
-*(.text.relocate_new_kernel)
-*(.text.release_thread)
-*(.text.release_mem)
-*(.text.rb_prev)
-*(.text.rb_first)
-*(.text.random_poll)
-*(.text.__put_super_and_need_restart)
-*(.text.pty_write)
-*(.text.ptrace_stop)
-*(.text.proc_self_readlink)
-*(.text.proc_root_lookup)
-*(.text.proc_root_link)
-*(.text.proc_pid_make_inode)
-*(.text.proc_pid_attr_write)
-*(.text.proc_lookupfd)
-*(.text.proc_delete_inode)
-*(.text.posix_same_owner)
-*(.text.posix_block_lock)
-*(.text.poll_initwait)
-*(.text.pipe_write)
-*(.text.pipe_read_fasync)
-*(.text.pipe_ioctl)
-*(.text.pdflush)
-*(.text.pci_user_read_config_dword)
-*(.text.page_readlink)
-*(.text.null_lseek)
-*(.text.nf_hook_slow)
-*(.text.netlink_sock_destruct)
-*(.text.netlink_broadcast)
-*(.text.neigh_resolve_output)
-*(.text.name_to_int)
-*(.text.mwait_idle)
-*(.text.mutex_trylock)
-*(.text.mutex_debug_check_no_locks_held)
-*(.text.m_stop)
-*(.text.mpage_end_io_write)
-*(.text.mpage_alloc)
-*(.text.move_page_tables)
-*(.text.mounts_open)
-*(.text.__memset)
-*(.text.memcpy_fromiovec)
-*(.text.make_8259A_irq)
-*(.text.lookup_user_key_possessed)
-*(.text.lookup_create)
-*(.text.locks_insert_lock)
-*(.text.locks_alloc_lock)
-*(.text.kthread_should_stop)
-*(.text.kswapd)
-*(.text.kobject_uevent)
-*(.text.kobject_get_path)
-*(.text.kobject_get)
-*(.text.klist_children_put)
-*(.text.__ip_route_output_key)
-*(.text.ip_flush_pending_frames)
-*(.text.ip_compute_csum)
-*(.text.ip_append_data)
-*(.text.ioc_set_batching)
-*(.text.invalidate_inode_pages)
-*(.text.__invalidate_device)
-*(.text.install_arg_page)
-*(.text.in_sched_functions)
-*(.text.inotify_unmount_inodes)
-*(.text.init_once)
-*(.text.init_cdrom_command)
-*(.text.inet_stream_connect)
-*(.text.inet_sk_rebuild_header)
-*(.text.inet_csk_addr2sockaddr)
-*(.text.inet_create)
-*(.text.ifind)
-*(.text.ide_setup_dma)
-*(.text.ide_outsw)
-*(.text.ide_fixstring)
-*(.text.ide_dma_setup)
-*(.text.ide_cdrom_packet)
-*(.text.ide_cd_put)
-*(.text.ide_build_sglist)
-*(.text.i8259A_shutdown)
-*(.text.hung_up_tty_ioctl)
-*(.text.hrtimer_nanosleep)
-*(.text.hrtimer_init)
-*(.text.hrtimer_cancel)
-*(.text.hash_futex)
-*(.text.group_send_sig_info)
-*(.text.grab_cache_page_nowait)
-*(.text.get_wchan)
-*(.text.get_stack)
-*(.text.get_page_state)
-*(.text.getnstimeofday)
-*(.text.get_node)
-*(.text.get_kprobe)
-*(.text.generic_unplug_device)
-*(.text.free_task)
-*(.text.frag_show)
-*(.text.find_next_zero_string)
-*(.text.filp_open)
-*(.text.fillonedir)
-*(.text.exit_io_context)
-*(.text.exit_idle)
-*(.text.exact_lock)
-*(.text.eth_header)
-*(.text.dummy_unregister_security)
-*(.text.dummy_socket_post_create)
-*(.text.dummy_socket_listen)
-*(.text.dummy_quota_on)
-*(.text.dummy_inode_follow_link)
-*(.text.dummy_file_receive)
-*(.text.dummy_file_mprotect)
-*(.text.dummy_file_lock)
-*(.text.dummy_file_ioctl)
-*(.text.dummy_bprm_post_apply_creds)
-*(.text.do_writepages)
-*(.text.__down_interruptible)
-*(.text.do_notify_resume)
-*(.text.do_acct_process)
-*(.text.del_timer_sync)
-*(.text.default_rebuild_header)
-*(.text.d_callback)
-*(.text.dcache_readdir)
-*(.text.ctrl_dumpfamily)
-*(.text.cpuset_rmdir)
-*(.text.copy_strings_kernel)
-*(.text.con_write_room)
-*(.text.complete_all)
-*(.text.collect_sigign_sigcatch)
-*(.text.clear_user)
-*(.text.check_unthrottle)
-*(.text.cdrom_release)
-*(.text.cdrom_newpc_intr)
-*(.text.cdrom_ioctl)
-*(.text.cdrom_check_status)
-*(.text.cdev_put)
-*(.text.cdev_add)
-*(.text.cap_ptrace)
-*(.text.cap_bprm_secureexec)
-*(.text.cache_alloc_refill)
-*(.text.bmap)
-*(.text.blk_run_queue)
-*(.text.blk_queue_dma_alignment)
-*(.text.blk_ordered_req_seq)
-*(.text.blk_backing_dev_unplug)
-*(.text.__bitmap_subset)
-*(.text.__bitmap_and)
-*(.text.bio_unmap_user)
-*(.text.__bforget)
-*(.text.bd_forget)
-*(.text.bad_pipe_w)
-*(.text.bad_get_user)
-*(.text.audit_free)
-*(.text.anon_vma_ctor)
-*(.text.anon_pipe_buf_map)
-*(.text.alloc_sock_iocb)
-*(.text.alloc_fdset)
-*(.text.aio_kick_handler)
-*(.text.__add_entropy_words)
-*(.text.add_disk_randomness)
diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c
index 0b3603adf56..47496a40e84 100644
--- a/arch/x86_64/kernel/genapic.c
+++ b/arch/x86_64/kernel/genapic.c
@@ -11,120 +11,54 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
-#include <linux/module.h>
 
 #include <asm/smp.h>
 #include <asm/ipi.h>
+#include <asm/genapic.h>
 
-#if defined(CONFIG_ACPI)
+#ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
 #endif
 
 /* which logical CPU number maps to which CPU (physical APIC ID) */
-u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
+u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly
+					= { [0 ... NR_CPUS-1] = BAD_APICID };
 EXPORT_SYMBOL(x86_cpu_to_apicid);
-u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
 
-extern struct genapic apic_cluster;
-extern struct genapic apic_flat;
-extern struct genapic apic_physflat;
+u8 x86_cpu_to_log_apicid[NR_CPUS]	= { [0 ... NR_CPUS-1] = BAD_APICID };
 
-struct genapic *genapic = &apic_flat;
-struct genapic *genapic_force;
+struct genapic __read_mostly *genapic = &apic_flat;
 
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
-void __init clustered_apic_check(void)
+void __init setup_apic_routing(void)
 {
-	long i;
-	u8 clusters, max_cluster;
-	u8 id;
-	u8 cluster_cnt[NUM_APIC_CLUSTERS];
-	int max_apic = 0;
-
-	/* genapic selection can be forced because of certain quirks.
-	 */
-	if (genapic_force) {
-		genapic = genapic_force;
-		goto print;
-	}
-
-#if defined(CONFIG_ACPI)
+#ifdef CONFIG_ACPI
 	/*
-	 * Some x86_64 machines use physical APIC mode regardless of how many
-	 * procs/clusters are present (x86_64 ES7000 is an example).
+	 * Quirk: some x86_64 machines can only use physical APIC mode
+	 * regardless of how many processors are present (x86_64 ES7000
+	 * is an example).
 	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID)
-		if (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) {
-			genapic = &apic_cluster;
-			goto print;
-		}
-#endif
-
-	memset(cluster_cnt, 0, sizeof(cluster_cnt));
-	for (i = 0; i < NR_CPUS; i++) {
-		id = bios_cpu_apicid[i];
-		if (id == BAD_APICID)
-			continue;
-		if (id > max_apic)
-			max_apic = id;
-		cluster_cnt[APIC_CLUSTERID(id)]++;
-	}
-
-	/* Don't use clustered mode on AMD platforms. */
- 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+			(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
 		genapic = &apic_physflat;
-#ifndef CONFIG_HOTPLUG_CPU
-		/* In the CPU hotplug case we cannot use broadcast mode
-		   because that opens a race when a CPU is removed.
-		   Stay at physflat mode in this case.
-		   It is bad to do this unconditionally though. Once
-		   we have ACPI platform support for CPU hotplug
-		   we should detect hotplug capablity from ACPI tables and
-		   only do this when really needed. -AK */
-		if (max_apic <= 8)
-			genapic = &apic_flat;
+	else
 #endif
- 		goto print;
- 	}
 
-	clusters = 0;
-	max_cluster = 0;
-
-	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
-		if (cluster_cnt[i] > 0) {
-			++clusters;
-			if (cluster_cnt[i] > max_cluster)
-				max_cluster = cluster_cnt[i];
-		}
-	}
-
-	/*
-	 * If we have clusters <= 1 and CPUs <= 8 in cluster 0, then flat mode,
-	 * else if max_cluster <= 4 and cluster_cnt[15] == 0, clustered logical
-	 * else physical mode.
-	 * (We don't use lowest priority delivery + HW APIC IRQ steering, so
-	 * can ignore the clustered logical case and go straight to physical.)
-	 */
-	if (clusters <= 1 && max_cluster <= 8 && cluster_cnt[0] == max_cluster) {
-#ifdef CONFIG_HOTPLUG_CPU
-		/* Don't use APIC shortcuts in CPU hotplug to avoid races */
-		genapic = &apic_physflat;
-#else
+	if (cpus_weight(cpu_possible_map) <= 8)
 		genapic = &apic_flat;
-#endif
-	} else
-		genapic = &apic_cluster;
+	else
+		genapic = &apic_physflat;
 
-print:
 	printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
 }
 
-/* Same for both flat and clustered. */
+/* Same for both flat and physical. */
 
 void send_IPI_self(int vector)
 {
diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c
deleted file mode 100644
index 73d76308b95..00000000000
--- a/arch/x86_64/kernel/genapic_cluster.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Clustered APIC subarch code.  Up to 255 CPUs, physical delivery.
- * (A more realistic maximum is around 230 CPUs.)
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <asm/smp.h>
-#include <asm/ipi.h>
-
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void cluster_init_apic_ldr(void)
-{
-	unsigned long val, id;
-	long i, count;
-	u8 lid;
-	u8 my_id = hard_smp_processor_id();
-	u8 my_cluster = APIC_CLUSTER(my_id);
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = NR_CPUS; --i >= 0; ) {
-		lid = x86_cpu_to_log_apicid[i];
-		if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
-			++count;
-	}
-	/*
-	 * We only have a 4 wide bitmap in cluster mode.  There's no way
-	 * to get above 60 CPUs and still give each one it's own bit.
-	 * But, we're using physical IRQ delivery, so we don't care.
-	 * Use bit 3 for the 4th through Nth CPU in each cluster.
-	 */
-	if (count >= XAPIC_DEST_CPUS_SHIFT)
-		count = 3;
-	id = my_cluster | (1UL << count);
-	x86_cpu_to_log_apicid[smp_processor_id()] = id;
-	apic_write(APIC_DFR, APIC_DFR_CLUSTER);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
-static cpumask_t cluster_target_cpus(void)
-{
-	return cpumask_of_cpu(0);
-}
-
-static cpumask_t cluster_vector_allocation_domain(int cpu)
-{
-	cpumask_t domain = CPU_MASK_NONE;
-	cpu_set(cpu, domain);
-	return domain;
-}
-
-static void cluster_send_IPI_mask(cpumask_t mask, int vector)
-{
-	send_IPI_mask_sequence(mask, vector);
-}
-
-static void cluster_send_IPI_allbutself(int vector)
-{
-	cpumask_t mask = cpu_online_map;
-
-	cpu_clear(smp_processor_id(), mask);
-
-	if (!cpus_empty(mask))
-		cluster_send_IPI_mask(mask, vector);
-}
-
-static void cluster_send_IPI_all(int vector)
-{
-	cluster_send_IPI_mask(cpu_online_map, vector);
-}
-
-static int cluster_apic_id_registered(void)
-{
-	return 1;
-}
-
-static unsigned int cluster_cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
-		return x86_cpu_to_apicid[cpu];
-	else
-		return BAD_APICID;
-}
-
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static unsigned int phys_pkg_id(int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-struct genapic apic_cluster = {
-	.name = "clustered",
-	.int_delivery_mode = dest_Fixed,
-	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
-	.target_cpus = cluster_target_cpus,
-	.vector_allocation_domain = cluster_vector_allocation_domain,
-	.apic_id_registered = cluster_apic_id_registered,
-	.init_apic_ldr = cluster_init_apic_ldr,
-	.send_IPI_all = cluster_send_IPI_all,
-	.send_IPI_allbutself = cluster_send_IPI_allbutself,
-	.send_IPI_mask = cluster_send_IPI_mask,
-	.cpu_mask_to_apicid = cluster_cpu_mask_to_apicid,
-	.phys_pkg_id = phys_pkg_id,
-};
diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c
index 7c01db8fa9d..ecb01eefdd2 100644
--- a/arch/x86_64/kernel/genapic_flat.c
+++ b/arch/x86_64/kernel/genapic_flat.c
@@ -8,6 +8,7 @@
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
  */
+#include <linux/errno.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
@@ -16,6 +17,7 @@
 #include <linux/init.h>
 #include <asm/smp.h>
 #include <asm/ipi.h>
+#include <asm/genapic.h>
 
 static cpumask_t flat_target_cpus(void)
 {
@@ -60,31 +62,10 @@ static void flat_init_apic_ldr(void)
 static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
 {
 	unsigned long mask = cpus_addr(cpumask)[0];
-	unsigned long cfg;
 	unsigned long flags;
 
 	local_irq_save(flags);
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	apic_write(APIC_ICR2, cfg);
-
-	/*
-	 * program the ICR
-	 */
-	cfg = __prepare_ICR(0, vector, APIC_DEST_LOGICAL);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write(APIC_ICR, cfg);
+	__send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
 	local_irq_restore(flags);
 }
 
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 598a4d0351f..1fab487dee8 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -5,6 +5,7 @@
  *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
  *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
  *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
+ *  Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
  */
 
 
@@ -13,97 +14,131 @@
 #include <linux/init.h>
 #include <asm/desc.h>
 #include <asm/segment.h>
+#include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/msr.h>
 #include <asm/cache.h>
-	
+
 /* we are not able to switch in one step to the final KERNEL ADRESS SPACE
- * because we need identity-mapped pages on setup so define __START_KERNEL to
- * 0x100000 for this stage
- * 
+ * because we need identity-mapped pages.
+ *
  */
 
 	.text
 	.section .bootstrap.text
-	.code32
-	.globl startup_32
-/* %bx:	 1 if coming from smp trampoline on secondary cpu */ 
-startup_32:
-	
+	.code64
+	.globl startup_64
+startup_64:
+
 	/*
-	 * At this point the CPU runs in 32bit protected mode (CS.D = 1) with
-	 * paging disabled and the point of this file is to switch to 64bit
-	 * long mode with a kernel mapping for kerneland to jump into the
-	 * kernel virtual addresses.
- 	 * There is no stack until we set one up.
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+	 * and someone has loaded an identity mapped page table
+	 * for us.  These identity mapped page tables map all of the
+	 * kernel pages and possibly all of memory.
+	 *
+	 * %esi holds a physical pointer to real_mode_data.
+	 *
+	 * We come here either directly from a 64bit bootloader, or from
+	 * arch/x86_64/boot/compressed/head.S.
+	 *
+	 * We only come here initially at boot nothing else comes here.
+	 *
+	 * Since we may be loaded at an address different from what we were
+	 * compiled to run at we first fixup the physical addresses in our page
+	 * tables and then reload them.
 	 */
 
-	/* Initialize the %ds segment register */
-	movl $__KERNEL_DS,%eax
-	movl %eax,%ds
-
-	/* Load new GDT with the 64bit segments using 32bit descriptor */
-	lgdt	pGDT32 - __START_KERNEL_map
-
-	/* If the CPU doesn't support CPUID this will double fault.
-	 * Unfortunately it is hard to check for CPUID without a stack. 
+	/* Compute the delta between the address I am compiled to run at and the
+	 * address I am actually running at.
 	 */
-	
-	/* Check if extended functions are implemented */		
-	movl	$0x80000000, %eax
-	cpuid
-	cmpl	$0x80000000, %eax
-	jbe	no_long_mode
-	/* Check if long mode is implemented */
-	mov	$0x80000001, %eax
-	cpuid
-	btl	$29, %edx
-	jnc	no_long_mode
-
-	/*
-	 * Prepare for entering 64bits mode
+	leaq	_text(%rip), %rbp
+	subq	$_text - __START_KERNEL_map, %rbp
+
+	/* Is the address not 2M aligned? */
+	movq	%rbp, %rax
+	andl	$~LARGE_PAGE_MASK, %eax
+	testl	%eax, %eax
+	jnz	bad_address
+
+	/* Is the address too large? */
+	leaq	_text(%rip), %rdx
+	movq	$PGDIR_SIZE, %rax
+	cmpq	%rax, %rdx
+	jae	bad_address
+
+	/* Fixup the physical addresses in the page table
 	 */
+	addq	%rbp, init_level4_pgt + 0(%rip)
+	addq	%rbp, init_level4_pgt + (258*8)(%rip)
+	addq	%rbp, init_level4_pgt + (511*8)(%rip)
+
+	addq	%rbp, level3_ident_pgt + 0(%rip)
+	addq	%rbp, level3_kernel_pgt + (510*8)(%rip)
+
+	/* Add an Identity mapping if I am above 1G */
+	leaq	_text(%rip), %rdi
+	andq	$LARGE_PAGE_MASK, %rdi
+
+	movq	%rdi, %rax
+	shrq	$PUD_SHIFT, %rax
+	andq	$(PTRS_PER_PUD - 1), %rax
+	jz	ident_complete
+
+	leaq	(level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
+	leaq	level3_ident_pgt(%rip), %rbx
+	movq	%rdx, 0(%rbx, %rax, 8)
+
+	movq	%rdi, %rax
+	shrq	$PMD_SHIFT, %rax
+	andq	$(PTRS_PER_PMD - 1), %rax
+	leaq	__PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
+	leaq	level2_spare_pgt(%rip), %rbx
+	movq	%rdx, 0(%rbx, %rax, 8)
+ident_complete:
+
+	/* Fixup the kernel text+data virtual addresses
+	 */
+	leaq	level2_kernel_pgt(%rip), %rdi
+	leaq	4096(%rdi), %r8
+	/* See if it is a valid page table entry */
+1:	testq	$1, 0(%rdi)
+	jz	2f
+	addq	%rbp, 0(%rdi)
+	/* Go to the next page */
+2:	addq	$8, %rdi
+	cmp	%r8, %rdi
+	jne	1b
+
+	/* Fixup phys_base */
+	addq	%rbp, phys_base(%rip)
 
-	/* Enable PAE mode */
-	xorl	%eax, %eax
-	btsl	$5, %eax
-	movl	%eax, %cr4
-
-	/* Setup early boot stage 4 level pagetables */
-	movl	$(boot_level4_pgt - __START_KERNEL_map), %eax
-	movl	%eax, %cr3
-
-	/* Setup EFER (Extended Feature Enable Register) */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-
-	/* Enable Long Mode */
-	btsl	$_EFER_LME, %eax
-				
-	/* Make changes effective */
-	wrmsr
+#ifdef CONFIG_SMP
+	addq	%rbp, trampoline_level4_pgt + 0(%rip)
+	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+	addq	%rbp, wakeup_level4_pgt + 0(%rip)
+	addq	%rbp, wakeup_level4_pgt + (511*8)(%rip)
+#endif
 
-	xorl	%eax, %eax
-	btsl	$31, %eax			/* Enable paging and in turn activate Long Mode */
-	btsl	$0, %eax			/* Enable protected mode */
-	/* Make changes effective */
-	movl	%eax, %cr0
-	/*
-	 * At this point we're in long mode but in 32bit compatibility mode
-	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
-	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+	/* Due to ENTRY(), sometimes the empty space gets filled with
+	 * zeros. Better take a jmp than relying on empty space being
+	 * filled with 0x90 (nop)
 	 */
-	ljmp	$__KERNEL_CS, $(startup_64 - __START_KERNEL_map)
-
-	.code64
-	.org 0x100	
-	.globl startup_64
-startup_64:
-	/* We come here either from startup_32
-	 * or directly from a 64bit bootloader.
-	 * Since we may have come directly from a bootloader we
-	 * reload the page tables here.
+	jmp secondary_startup_64
+ENTRY(secondary_startup_64)
+	/*
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+	 * and someone has loaded a mapped page table.
+	 *
+	 * %esi holds a physical pointer to real_mode_data.
+	 *
+	 * We come here either from startup_64 (using physical addresses)
+	 * or from trampoline.S (using virtual addresses).
+	 *
+	 * Using virtual addresses from trampoline.S removes the need
+	 * to have any identity mapped pages in the kernel page table
+	 * after the boot processor executes this code.
 	 */
 
 	/* Enable PAE mode and PGE */
@@ -113,9 +148,15 @@ startup_64:
 	movq	%rax, %cr4
 
 	/* Setup early boot stage 4 level pagetables. */
-	movq	$(boot_level4_pgt - __START_KERNEL_map), %rax
+	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
+	addq	phys_base(%rip), %rax
 	movq	%rax, %cr3
 
+	/* Ensure I am executing from virtual addresses */
+	movq	$1f, %rax
+	jmp	*%rax
+1:
+
 	/* Check if nx is implemented */
 	movl	$0x80000001, %eax
 	cpuid
@@ -124,17 +165,11 @@ startup_64:
 	/* Setup EFER (Extended Feature Enable Register) */
 	movl	$MSR_EFER, %ecx
 	rdmsr
-
-	/* Enable System Call */
-	btsl	$_EFER_SCE, %eax
-
-	/* No Execute supported? */
-	btl	$20,%edi
+	btsl	$_EFER_SCE, %eax	/* Enable System Call */
+	btl	$20,%edi		/* No Execute supported? */
 	jnc     1f
 	btsl	$_EFER_NX, %eax
-1:
-	/* Make changes effective */
-	wrmsr
+1:	wrmsr				/* Make changes effective */
 
 	/* Setup cr0 */
 #define CR0_PM				1		/* protected mode */
@@ -161,7 +196,7 @@ startup_64:
 	 * addresses where we're currently running on. We have to do that here
 	 * because in 32bit we couldn't load a 64bit linear address.
 	 */
-	lgdt	cpu_gdt_descr
+	lgdt	cpu_gdt_descr(%rip)
 
 	/* set up data segments. actually 0 would do too */
 	movl $__KERNEL_DS,%eax
@@ -212,6 +247,9 @@ initial_code:
 init_rsp:
 	.quad  init_thread_union+THREAD_SIZE-8
 
+bad_address:
+	jmp bad_address
+
 ENTRY(early_idt_handler)
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
@@ -240,110 +278,66 @@ early_idt_msg:
 early_idt_ripmsg:
 	.asciz "RIP %s\n"
 
-.code32
-ENTRY(no_long_mode)
-	/* This isn't an x86-64 CPU so hang */
-1:
-	jmp	1b
-
-.org 0xf00
-	.globl pGDT32
-pGDT32:
-	.word	gdt_end-cpu_gdt_table-1
-	.long	cpu_gdt_table-__START_KERNEL_map
-
-.org 0xf10	
-ljumpvector:
-	.long	startup_64-__START_KERNEL_map
-	.word	__KERNEL_CS
+.balign PAGE_SIZE
 
-ENTRY(stext)
-ENTRY(_stext)
-
-	$page = 0
 #define NEXT_PAGE(name) \
-	$page = $page + 1; \
-	.org $page * 0x1000; \
-	phys_/**/name = $page * 0x1000 + __PHYSICAL_START; \
+	.balign	PAGE_SIZE; \
 ENTRY(name)
 
+/* Automate the creation of 1 to 1 mapping pmd entries */
+#define PMDS(START, PERM, COUNT)		\
+	i = 0 ;					\
+	.rept (COUNT) ;				\
+	.quad	(START) + (i << 21) + (PERM) ;	\
+	i = i + 1 ;				\
+	.endr
+
+	/*
+	 * This default setting generates an ident mapping at address 0x100000
+	 * and a mapping for the kernel that precisely maps virtual address
+	 * 0xffffffff80000000 to physical address 0x000000. (always using
+	 * 2Mbyte large pages provided by PAE mode)
+	 */
 NEXT_PAGE(init_level4_pgt)
-	/* This gets initialized in x86_64_start_kernel */
-	.fill	512,8,0
+	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+	.fill	257,8,0
+	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+	.fill	252,8,0
+	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
 
 NEXT_PAGE(level3_ident_pgt)
-	.quad	phys_level2_ident_pgt | 0x007
+	.quad	level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
 	.fill	511,8,0
 
 NEXT_PAGE(level3_kernel_pgt)
 	.fill	510,8,0
 	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
-	.quad	phys_level2_kernel_pgt | 0x007
+	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
 	.fill	1,8,0
 
 NEXT_PAGE(level2_ident_pgt)
-	/* 40MB for bootup. 	*/
-	i = 0
-	.rept 20
-	.quad	i << 21 | 0x083
-	i = i + 1
-	.endr
-	/* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */
-	.globl temp_boot_pmds
-temp_boot_pmds:
-	.fill	492,8,0
-	
+	/* Since I easily can, map the first 1G.
+	 * Don't set NX because code runs from these pages.
+	 */
+	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
+
 NEXT_PAGE(level2_kernel_pgt)
 	/* 40MB kernel mapping. The kernel code cannot be bigger than that.
 	   When you change this change KERNEL_TEXT_SIZE in page.h too. */
 	/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
-	i = 0
-	.rept 20
-	.quad	i << 21 | 0x183
-	i = i + 1
-	.endr
+	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
+		KERNEL_TEXT_SIZE/PMD_SIZE)
 	/* Module mapping starts here */
-	.fill	492,8,0
+	.fill	(PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
 
-NEXT_PAGE(level3_physmem_pgt)
-	.quad	phys_level2_kernel_pgt | 0x007	/* so that __va works even before pagetable_init */
-	.fill	511,8,0
+NEXT_PAGE(level2_spare_pgt)
+	.fill   512,8,0
 
+#undef PMDS
 #undef NEXT_PAGE
 
 	.data
-
-#ifdef CONFIG_ACPI_SLEEP
-	.align PAGE_SIZE
-ENTRY(wakeup_level4_pgt)
-	.quad	phys_level3_ident_pgt | 0x007
-	.fill	255,8,0
-	.quad	phys_level3_physmem_pgt | 0x007
-	.fill	254,8,0
-	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
-	.quad	phys_level3_kernel_pgt | 0x007
-#endif
-
-#ifndef CONFIG_HOTPLUG_CPU
-	__INITDATA
-#endif
-	/*
-	 * This default setting generates an ident mapping at address 0x100000
-	 * and a mapping for the kernel that precisely maps virtual address
-	 * 0xffffffff80000000 to physical address 0x000000. (always using
-	 * 2Mbyte large pages provided by PAE mode)
-	 */
-	.align PAGE_SIZE
-ENTRY(boot_level4_pgt)
-	.quad	phys_level3_ident_pgt | 0x007
-	.fill	255,8,0
-	.quad	phys_level3_physmem_pgt | 0x007
-	.fill	254,8,0
-	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
-	.quad	phys_level3_kernel_pgt | 0x007
-
-	.data
-
 	.align 16
 	.globl cpu_gdt_descr
 cpu_gdt_descr:
@@ -357,6 +351,10 @@ gdt:
 	.endr
 #endif
 
+ENTRY(phys_base)
+	/* This must match the first entry in level2_kernel_pgt */
+	.quad   0x0000000000000000
+
 /* We need valid kernel segments for data and code in long mode too
  * IRET will check the segment types  kkeil 2000/10/28
  * Also sysret mandates a special GDT layout 
@@ -370,13 +368,13 @@ gdt:
 	
 ENTRY(cpu_gdt_table)
 	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x00cf9b000000ffff	/* __KERNEL32_CS */
+	.quad	0x00af9b000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
+	.quad	0x00cffb000000ffff	/* __USER32_CS */
+	.quad	0x00cff3000000ffff	/* __USER_DS, __USER32_DS  */
+	.quad	0x00affb000000ffff	/* __USER_CS */
 	.quad	0x0			/* unused */
-	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
-	.quad	0x00cffa000000ffff	/* __USER32_CS */
-	.quad	0x00cff2000000ffff	/* __USER_DS, __USER32_DS  */		
-	.quad	0x00affa000000ffff	/* __USER_CS */
-	.quad	0x00cf9a000000ffff	/* __KERNEL32_CS */
 	.quad	0,0			/* TSS */
 	.quad	0,0			/* LDT */
 	.quad   0,0,0			/* three TLS descriptors */ 
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index 5f197b0a330..213d90e0475 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -18,8 +18,16 @@
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 #include <asm/sections.h>
 
+static void __init zap_identity_mappings(void)
+{
+	pgd_t *pgd = pgd_offset_k(0UL);
+	pgd_clear(pgd);
+	__flush_tlb();
+}
+
 /* Don't add a printk in there. printk relies on the PDA which is not initialized 
    yet. */
 static void __init clear_bss(void)
@@ -29,25 +37,24 @@ static void __init clear_bss(void)
 }
 
 #define NEW_CL_POINTER		0x228	/* Relative to real mode data */
-#define OLD_CL_MAGIC_ADDR	0x90020
+#define OLD_CL_MAGIC_ADDR	0x20
 #define OLD_CL_MAGIC            0xA33F
-#define OLD_CL_BASE_ADDR        0x90000
-#define OLD_CL_OFFSET           0x90022
+#define OLD_CL_OFFSET           0x22
 
 static void __init copy_bootdata(char *real_mode_data)
 {
-	int new_data;
+	unsigned long new_data;
 	char * command_line;
 
 	memcpy(x86_boot_params, real_mode_data, BOOT_PARAM_SIZE);
-	new_data = *(int *) (x86_boot_params + NEW_CL_POINTER);
+	new_data = *(u32 *) (x86_boot_params + NEW_CL_POINTER);
 	if (!new_data) {
-		if (OLD_CL_MAGIC != * (u16 *) OLD_CL_MAGIC_ADDR) {
+		if (OLD_CL_MAGIC != *(u16 *)(real_mode_data + OLD_CL_MAGIC_ADDR)) {
 			return;
 		}
-		new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET;
+		new_data = __pa(real_mode_data) + *(u16 *)(real_mode_data + OLD_CL_OFFSET);
 	}
-	command_line = (char *) ((u64)(new_data));
+	command_line = __va(new_data);
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 }
 
@@ -55,26 +62,30 @@ void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
 
+	/*
+	 * Make sure kernel is aligned to 2MB address. Catching it at compile
+	 * time is better. Change your config file and compile the kernel
+	 * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+	 */
+	BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1));
+
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
 
+	/* Make NULL pointers segfault */
+	zap_identity_mappings();
+
 	for (i = 0; i < IDT_ENTRIES; i++)
 		set_intr_gate(i, early_idt_handler);
 	asm volatile("lidt %0" :: "m" (idt_descr));
 
 	early_printk("Kernel alive\n");
 
-	/*
-	 * switch to init_level4_pgt from boot_level4_pgt
-	 */
-	memcpy(init_level4_pgt, boot_level4_pgt, PTRS_PER_PGD*sizeof(pgd_t));
-	asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
-
  	for (i = 0; i < NR_CPUS; i++)
  		cpu_pda(i) = &boot_cpu_pda[i];
 
 	pda_init(0);
-	copy_bootdata(real_mode_data);
+	copy_bootdata(__va(real_mode_data));
 #ifdef CONFIG_SMP
 	cpu_set(0, cpu_online_map);
 #endif
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index c6a5bc7e811..2a2df14dab7 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -907,10 +907,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 	enable_8259A_irq(0);
 }
 
-void __init UNEXPECTED_IO_APIC(void)
-{
-}
-
 void __apicdebuginit print_IO_APIC(void)
 {
 	int apic, i;
@@ -946,40 +942,16 @@ void __apicdebuginit print_IO_APIC(void)
 	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-	if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
-		UNEXPECTED_IO_APIC();
 
 	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
 	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-	if (	(reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
-		(reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
-		(reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
-		(reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
-		(reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
-		(reg_01.bits.entries != 0x2E) &&
-		(reg_01.bits.entries != 0x3F) &&
-		(reg_01.bits.entries != 0x03) 
-	)
-		UNEXPECTED_IO_APIC();
 
 	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
 	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-	if (	(reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
-		(reg_01.bits.version != 0x02) && /* 82801BA IO-APICs (ICH2) */
-		(reg_01.bits.version != 0x10) && /* oldest IO-APICs */
-		(reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
-		(reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
-		(reg_01.bits.version != 0x20)    /* Intel P64H (82806 AA) */
-	)
-		UNEXPECTED_IO_APIC();
-	if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
-		UNEXPECTED_IO_APIC();
 
 	if (reg_01.bits.version >= 0x10) {
 		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
 		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-		if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
-			UNEXPECTED_IO_APIC();
 	}
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
@@ -1407,8 +1379,7 @@ static void irq_complete_move(unsigned int irq)
 
 	vector = ~get_irq_regs()->orig_rax;
 	me = smp_processor_id();
-	if ((vector == cfg->vector) &&
-	    cpu_isset(smp_processor_id(), cfg->domain)) {
+	if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
 		cpumask_t cleanup_mask;
 
 		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
@@ -1983,18 +1954,18 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (irq < 0)
 		return irq;
 
-	set_irq_msi(irq, desc);
 	ret = msi_compose_msg(dev, irq, &msg);
 	if (ret < 0) {
 		destroy_irq(irq);
 		return ret;
 	}
 
+	set_irq_msi(irq, desc);
 	write_msi_msg(irq, &msg);
 
 	set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
 
-	return irq;
+	return 0;
 }
 
 void arch_teardown_msi_irq(unsigned int irq)
diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c
index 745b1f0f494..387d347b0e0 100644
--- a/arch/x86_64/kernel/ioport.c
+++ b/arch/x86_64/kernel/ioport.c
@@ -16,6 +16,7 @@
 #include <linux/stddef.h>
 #include <linux/slab.h>
 #include <linux/thread_info.h>
+#include <linux/syscalls.h>
 
 /* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
 static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index 0497e3bd5bf..c3a55470367 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -189,21 +189,21 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	control_page = page_address(image->control_code_page) + PAGE_SIZE;
 	memcpy(control_page, relocate_kernel, PAGE_SIZE);
 
-	page_list[PA_CONTROL_PAGE] = __pa(control_page);
+	page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
 	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
-	page_list[PA_PGD] = __pa(kexec_pgd);
+	page_list[PA_PGD] = virt_to_phys(&kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
-	page_list[PA_PUD_0] = __pa(kexec_pud0);
+	page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0);
 	page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
-	page_list[PA_PMD_0] = __pa(kexec_pmd0);
+	page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0);
 	page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
-	page_list[PA_PTE_0] = __pa(kexec_pte0);
+	page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0);
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
-	page_list[PA_PUD_1] = __pa(kexec_pud1);
+	page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1);
 	page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
-	page_list[PA_PMD_1] = __pa(kexec_pmd1);
+	page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1);
 	page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
-	page_list[PA_PTE_1] = __pa(kexec_pte1);
+	page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
 
 	page_list[PA_TABLE_PAGE] =
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 8011a8e1c7d..fa267268247 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -323,10 +323,13 @@ void mce_log_therm_throt_event(unsigned int cpu, __u64 status)
 #endif /* CONFIG_X86_MCE_INTEL */
 
 /*
- * Periodic polling timer for "silent" machine check errors.
+ * Periodic polling timer for "silent" machine check errors.  If the
+ * poller finds an MCE, poll 2x faster.  When the poller finds no more
+ * errors, poll 2x slower (up to check_interval seconds).
  */
 
 static int check_interval = 5 * 60; /* 5 minutes */
+static int next_interval; /* in jiffies */
 static void mcheck_timer(struct work_struct *work);
 static DECLARE_DELAYED_WORK(mcheck_work, mcheck_timer);
 
@@ -339,7 +342,6 @@ static void mcheck_check_cpu(void *info)
 static void mcheck_timer(struct work_struct *work)
 {
 	on_each_cpu(mcheck_check_cpu, NULL, 1, 1);
-	schedule_delayed_work(&mcheck_work, check_interval * HZ);
 
 	/*
 	 * It's ok to read stale data here for notify_user and
@@ -349,17 +351,30 @@ static void mcheck_timer(struct work_struct *work)
 	 * writes.
 	 */
 	if (notify_user && console_logged) {
+		static unsigned long last_print;
+		unsigned long now = jiffies;
+
+		/* if we logged an MCE, reduce the polling interval */
+		next_interval = max(next_interval/2, HZ/100);
 		notify_user = 0;
 		clear_bit(0, &console_logged);
-		printk(KERN_INFO "Machine check events logged\n");
+		if (time_after_eq(now, last_print + (check_interval*HZ))) {
+			last_print = now;
+			printk(KERN_INFO "Machine check events logged\n");
+		}
+	} else {
+		next_interval = min(next_interval*2, check_interval*HZ);
 	}
+
+	schedule_delayed_work(&mcheck_work, next_interval);
 }
 
 
 static __init int periodic_mcheck_init(void)
 { 
-	if (check_interval)
-		schedule_delayed_work(&mcheck_work, check_interval*HZ);
+	next_interval = check_interval * HZ;
+	if (next_interval)
+		schedule_delayed_work(&mcheck_work, next_interval);
 	return 0;
 } 
 __initcall(periodic_mcheck_init);
@@ -597,12 +612,13 @@ static int mce_resume(struct sys_device *dev)
 /* Reinit MCEs after user configuration changes */
 static void mce_restart(void) 
 { 
-	if (check_interval)
+	if (next_interval)
 		cancel_delayed_work(&mcheck_work);
 	/* Timer race is harmless here */
 	on_each_cpu(mce_init, NULL, 1, 1);       
-	if (check_interval)
-		schedule_delayed_work(&mcheck_work, check_interval*HZ);
+	next_interval = check_interval * HZ;
+	if (next_interval)
+		schedule_delayed_work(&mcheck_work, next_interval);
 }
 
 static struct sysdev_class mce_sysclass = {
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 455aa0b932f..d0dc4891599 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -300,7 +300,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 			}
 		}
 	}
-	clustered_apic_check();
+	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index dfab9f16736..6cd2b30e2ff 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -27,28 +27,11 @@
 #include <asm/proto.h>
 #include <asm/kdebug.h>
 #include <asm/mce.h>
-#include <asm/intel_arch_perfmon.h>
 
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 int panic_on_unrecovered_nmi;
 
-/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
- * evtsel_nmi_owner tracks the ownership of the event selection
- * - different performance counters/ event selection may be reserved for
- *   different subsystems this reservation system just tries to coordinate
- *   things a little
- */
-
-/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
- * offset from MSR_P4_BSU_ESCR0.  It will be the max for all platforms (for now)
- */
-#define NMI_MAX_COUNTER_BITS 66
-#define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS)
-
-static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]);
-static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]);
-
 static cpumask_t backtrace_mask = CPU_MASK_NONE;
 
 /* nmi_active:
@@ -63,191 +46,11 @@ int panic_on_timeout;
 unsigned int nmi_watchdog = NMI_DEFAULT;
 static unsigned int nmi_hz = HZ;
 
-struct nmi_watchdog_ctlblk {
-	int enabled;
-	u64 check_bit;
-	unsigned int cccr_msr;
-	unsigned int perfctr_msr;  /* the MSR to reset in NMI handler */
-	unsigned int evntsel_msr;  /* the MSR to select the events to handle */
-};
-static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
+static DEFINE_PER_CPU(short, wd_enabled);
 
 /* local prototypes */
 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
 
-/* converts an msr to an appropriate reservation bit */
-static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
-{
-	/* returns the bit offset of the performance counter register */
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_PERFCTR0);
-	case X86_VENDOR_INTEL:
-		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_PERFCTR0);
-		else
-			return (msr - MSR_P4_BPU_PERFCTR0);
-	}
-	return 0;
-}
-
-/* converts an msr to an appropriate reservation bit */
-static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
-{
-	/* returns the bit offset of the event selection register */
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_EVNTSEL0);
-	case X86_VENDOR_INTEL:
-		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
-		else
-			return (msr - MSR_P4_BSU_ESCR0);
-	}
-	return 0;
-}
-
-/* checks for a bit availability (hack for oprofile) */
-int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
-{
-	int cpu;
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-	for_each_possible_cpu (cpu) {
-		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
-			return 0;
-	}
-	return 1;
-}
-
-/* checks the an msr for availability */
-int avail_to_resrv_perfctr_nmi(unsigned int msr)
-{
-	unsigned int counter;
-	int cpu;
-
-	counter = nmi_perfctr_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	for_each_possible_cpu (cpu) {
-		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
-			return 0;
-	}
-	return 1;
-}
-
-static int __reserve_perfctr_nmi(int cpu, unsigned int msr)
-{
-	unsigned int counter;
-	if (cpu < 0)
-		cpu = smp_processor_id();
-
-	counter = nmi_perfctr_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
-		return 1;
-	return 0;
-}
-
-static void __release_perfctr_nmi(int cpu, unsigned int msr)
-{
-	unsigned int counter;
-	if (cpu < 0)
-		cpu = smp_processor_id();
-
-	counter = nmi_perfctr_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu));
-}
-
-int reserve_perfctr_nmi(unsigned int msr)
-{
-	int cpu, i;
-	for_each_possible_cpu (cpu) {
-		if (!__reserve_perfctr_nmi(cpu, msr)) {
-			for_each_possible_cpu (i) {
-				if (i >= cpu)
-					break;
-				__release_perfctr_nmi(i, msr);
-			}
-			return 0;
-		}
-	}
-	return 1;
-}
-
-void release_perfctr_nmi(unsigned int msr)
-{
-	int cpu;
-	for_each_possible_cpu (cpu)
-		__release_perfctr_nmi(cpu, msr);
-}
-
-int __reserve_evntsel_nmi(int cpu, unsigned int msr)
-{
-	unsigned int counter;
-	if (cpu < 0)
-		cpu = smp_processor_id();
-
-	counter = nmi_evntsel_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]))
-		return 1;
-	return 0;
-}
-
-static void __release_evntsel_nmi(int cpu, unsigned int msr)
-{
-	unsigned int counter;
-	if (cpu < 0)
-		cpu = smp_processor_id();
-
-	counter = nmi_evntsel_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]);
-}
-
-int reserve_evntsel_nmi(unsigned int msr)
-{
-	int cpu, i;
-	for_each_possible_cpu (cpu) {
-		if (!__reserve_evntsel_nmi(cpu, msr)) {
-			for_each_possible_cpu (i) {
-				if (i >= cpu)
-					break;
-				__release_evntsel_nmi(i, msr);
-			}
-			return 0;
-		}
-	}
-	return 1;
-}
-
-void release_evntsel_nmi(unsigned int msr)
-{
-	int cpu;
-	for_each_possible_cpu (cpu) {
-		__release_evntsel_nmi(cpu, msr);
-	}
-}
-
-static __cpuinit inline int nmi_known_cpu(void)
-{
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		return boot_cpu_data.x86 == 15 || boot_cpu_data.x86 == 16;
-	case X86_VENDOR_INTEL:
-		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return 1;
-		else
-			return (boot_cpu_data.x86 == 15);
-	}
-	return 0;
-}
-
 /* Run after command line and cpu_init init, but before all other checks */
 void nmi_watchdog_default(void)
 {
@@ -277,23 +80,6 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
-static unsigned int adjust_for_32bit_ctr(unsigned int hz)
-{
-	unsigned int retval = hz;
-
-	/*
-	 * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
-	 * are writable, with higher bits sign extending from bit 31.
-	 * So, we can only program the counter with 31 bit values and
-	 * 32nd bit should be 1, for 33.. to be 1.
-	 * Find the appropriate nmi_hz
-	 */
- 	if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) {
-		retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1;
-	}
-	return retval;
-}
-
 int __init check_nmi_watchdog (void)
 {
 	int *counts;
@@ -322,14 +108,14 @@ int __init check_nmi_watchdog (void)
 	mdelay((20*1000)/nmi_hz); // wait 20 ticks
 
 	for_each_online_cpu(cpu) {
-		if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
+		if (!per_cpu(wd_enabled, cpu))
 			continue;
 		if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
 			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
 			       cpu,
 			       counts[cpu],
 			       cpu_pda(cpu)->__nmi_count);
-			per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0;
+			per_cpu(wd_enabled, cpu) = 0;
 			atomic_dec(&nmi_active);
 		}
 	}
@@ -344,13 +130,8 @@ int __init check_nmi_watchdog (void)
 
 	/* now that we know it works we can reduce NMI frequency to
 	   something more reasonable; makes a difference in some configs */
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-		nmi_hz = 1;
-	 	if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0)
-			nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	}
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		nmi_hz = lapic_adjust_nmi_hz(1);
 
 	kfree(counts);
 	return 0;
@@ -379,57 +160,6 @@ int __init setup_nmi_watchdog(char *str)
 
 __setup("nmi_watchdog=", setup_nmi_watchdog);
 
-static void disable_lapic_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-
-	if (atomic_read(&nmi_active) <= 0)
-		return;
-
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
-
-	BUG_ON(atomic_read(&nmi_active) != 0);
-}
-
-static void enable_lapic_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-
-	/* are we already enabled */
-	if (atomic_read(&nmi_active) != 0)
-		return;
-
-	/* are we lapic aware */
-	if (nmi_known_cpu() <= 0)
-		return;
-
-	on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
-	touch_nmi_watchdog();
-}
-
-void disable_timer_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_IO_APIC);
-
-	if (atomic_read(&nmi_active) <= 0)
-		return;
-
-	disable_irq(0);
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
-
-	BUG_ON(atomic_read(&nmi_active) != 0);
-}
-
-void enable_timer_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_IO_APIC);
-
-	if (atomic_read(&nmi_active) == 0) {
-		touch_nmi_watchdog();
-		on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
-		enable_irq(0);
-	}
-}
 
 static void __acpi_nmi_disable(void *__unused)
 {
@@ -515,275 +245,9 @@ late_initcall(init_lapic_nmi_sysfs);
 
 #endif	/* CONFIG_PM */
 
-/*
- * Activate the NMI watchdog via the local APIC.
- * Original code written by Keith Owens.
- */
-
-/* Note that these events don't tick when the CPU idles. This means
-   the frequency varies with CPU load. */
-
-#define K7_EVNTSEL_ENABLE	(1 << 22)
-#define K7_EVNTSEL_INT		(1 << 20)
-#define K7_EVNTSEL_OS		(1 << 17)
-#define K7_EVNTSEL_USR		(1 << 16)
-#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING	0x76
-#define K7_NMI_EVENT		K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
-
-static int setup_k7_watchdog(void)
-{
-	unsigned int perfctr_msr, evntsel_msr;
-	unsigned int evntsel;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	perfctr_msr = MSR_K7_PERFCTR0;
-	evntsel_msr = MSR_K7_EVNTSEL0;
-	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
-		goto fail;
-
-	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
-		goto fail1;
-
-	/* Simulator may not support it */
-	if (checking_wrmsrl(evntsel_msr, 0UL))
-		goto fail2;
-	wrmsrl(perfctr_msr, 0UL);
-
-	evntsel = K7_EVNTSEL_INT
-		| K7_EVNTSEL_OS
-		| K7_EVNTSEL_USR
-		| K7_NMI_EVENT;
-
-	/* setup the timer */
-	wrmsr(evntsel_msr, evntsel, 0);
-	wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= K7_EVNTSEL_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
-
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
-	wd->check_bit = 1ULL<<63;
-	return 1;
-fail2:
-	__release_evntsel_nmi(-1, evntsel_msr);
-fail1:
-	__release_perfctr_nmi(-1, perfctr_msr);
-fail:
-	return 0;
-}
-
-static void stop_k7_watchdog(void)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	wrmsr(wd->evntsel_msr, 0, 0);
-
-	__release_evntsel_nmi(-1, wd->evntsel_msr);
-	__release_perfctr_nmi(-1, wd->perfctr_msr);
-}
-
-/* Note that these events don't tick when the CPU idles. This means
-   the frequency varies with CPU load. */
-
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1<<7)
-#define P4_ESCR_EVENT_SELECT(N)	((N)<<25)
-#define P4_ESCR_OS		(1<<3)
-#define P4_ESCR_USR		(1<<2)
-#define P4_CCCR_OVF_PMI0	(1<<26)
-#define P4_CCCR_OVF_PMI1	(1<<27)
-#define P4_CCCR_THRESHOLD(N)	((N)<<20)
-#define P4_CCCR_COMPLEMENT	(1<<19)
-#define P4_CCCR_COMPARE		(1<<18)
-#define P4_CCCR_REQUIRED	(3<<16)
-#define P4_CCCR_ESCR_SELECT(N)	((N)<<13)
-#define P4_CCCR_ENABLE		(1<<12)
-#define P4_CCCR_OVF 		(1<<31)
-/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
-   CRU_ESCR0 (with any non-null event selector) through a complemented
-   max threshold. [IA32-Vol3, Section 14.9.9] */
-
-static int setup_p4_watchdog(void)
-{
-	unsigned int perfctr_msr, evntsel_msr, cccr_msr;
-	unsigned int evntsel, cccr_val;
-	unsigned int misc_enable, dummy;
-	unsigned int ht_num;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
-	if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
-		return 0;
-
-#ifdef CONFIG_SMP
-	/* detect which hyperthread we are on */
-	if (smp_num_siblings == 2) {
-		unsigned int ebx, apicid;
-
-        	ebx = cpuid_ebx(1);
-	        apicid = (ebx >> 24) & 0xff;
-        	ht_num = apicid & 1;
-	} else
-#endif
-		ht_num = 0;
-
-	/* performance counters are shared resources
-	 * assign each hyperthread its own set
-	 * (re-use the ESCR0 register, seems safe
-	 * and keeps the cccr_val the same)
-	 */
-	if (!ht_num) {
-		/* logical cpu 0 */
-		perfctr_msr = MSR_P4_IQ_PERFCTR0;
-		evntsel_msr = MSR_P4_CRU_ESCR0;
-		cccr_msr = MSR_P4_IQ_CCCR0;
-		cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
-	} else {
-		/* logical cpu 1 */
-		perfctr_msr = MSR_P4_IQ_PERFCTR1;
-		evntsel_msr = MSR_P4_CRU_ESCR0;
-		cccr_msr = MSR_P4_IQ_CCCR1;
-		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
-	}
-
-	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
-		goto fail;
-
-	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
-		goto fail1;
-
-	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
-	 	| P4_ESCR_OS
-		| P4_ESCR_USR;
-
-	cccr_val |= P4_CCCR_THRESHOLD(15)
-		 | P4_CCCR_COMPLEMENT
-		 | P4_CCCR_COMPARE
-		 | P4_CCCR_REQUIRED;
-
-	wrmsr(evntsel_msr, evntsel, 0);
-	wrmsr(cccr_msr, cccr_val, 0);
-	wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	cccr_val |= P4_CCCR_ENABLE;
-	wrmsr(cccr_msr, cccr_val, 0);
-
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = cccr_msr;
-	wd->check_bit = 1ULL<<39;
-	return 1;
-fail1:
-	__release_perfctr_nmi(-1, perfctr_msr);
-fail:
-	return 0;
-}
-
-static void stop_p4_watchdog(void)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	wrmsr(wd->cccr_msr, 0, 0);
-	wrmsr(wd->evntsel_msr, 0, 0);
-
-	__release_evntsel_nmi(-1, wd->evntsel_msr);
-	__release_perfctr_nmi(-1, wd->perfctr_msr);
-}
-
-#define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
-#define ARCH_PERFMON_NMI_EVENT_UMASK	ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
-
-static int setup_intel_arch_watchdog(void)
-{
-	unsigned int ebx;
-	union cpuid10_eax eax;
-	unsigned int unused;
-	unsigned int perfctr_msr, evntsel_msr;
-	unsigned int evntsel;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	/*
-	 * Check whether the Architectural PerfMon supports
-	 * Unhalted Core Cycles Event or not.
-	 * NOTE: Corresponding bit = 0 in ebx indicates event present.
-	 */
-	cpuid(10, &(eax.full), &ebx, &unused, &unused);
-	if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
-	    (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
-		goto fail;
-
-	perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
-	evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
-
-	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
-		goto fail;
-
-	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
-		goto fail1;
-
-	wrmsrl(perfctr_msr, 0UL);
-
-	evntsel = ARCH_PERFMON_EVENTSEL_INT
-		| ARCH_PERFMON_EVENTSEL_OS
-		| ARCH_PERFMON_EVENTSEL_USR
-		| ARCH_PERFMON_NMI_EVENT_SEL
-		| ARCH_PERFMON_NMI_EVENT_UMASK;
-
-	/* setup the timer */
-	wrmsr(evntsel_msr, evntsel, 0);
-
-	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0);
-
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
-
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  //unused
-	wd->check_bit = 1ULL << (eax.split.bit_width - 1);
-	return 1;
-fail1:
-	__release_perfctr_nmi(-1, perfctr_msr);
-fail:
-	return 0;
-}
-
-static void stop_intel_arch_watchdog(void)
-{
-	unsigned int ebx;
-	union cpuid10_eax eax;
-	unsigned int unused;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	/*
-	 * Check whether the Architectural PerfMon supports
-	 * Unhalted Core Cycles Event or not.
-	 * NOTE: Corresponding bit = 0 in ebx indicates event present.
-	 */
-	cpuid(10, &(eax.full), &ebx, &unused, &unused);
-	if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
-	    (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
-		return;
-
-	wrmsr(wd->evntsel_msr, 0, 0);
-
-	__release_evntsel_nmi(-1, wd->evntsel_msr);
-	__release_perfctr_nmi(-1, wd->perfctr_msr);
-}
-
 void setup_apic_nmi_watchdog(void *unused)
 {
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
-
-	if (wd->enabled == 1)
+	if (__get_cpu_var(wd_enabled) == 1)
 		return;
 
 	/* cheap hack to support suspend/resume */
@@ -791,62 +255,31 @@ void setup_apic_nmi_watchdog(void *unused)
 	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
 		return;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_AMD:
-			if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
-				return;
-			if (!setup_k7_watchdog())
-				return;
-			break;
-		case X86_VENDOR_INTEL:
-			if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
-				if (!setup_intel_arch_watchdog())
-					return;
-				break;
-			}
-			if (!setup_p4_watchdog())
-				return;
-			break;
-		default:
+	switch (nmi_watchdog) {
+	case NMI_LOCAL_APIC:
+		__get_cpu_var(wd_enabled) = 1;
+		if (lapic_watchdog_init(nmi_hz) < 0) {
+			__get_cpu_var(wd_enabled) = 0;
 			return;
 		}
+		/* FALL THROUGH */
+	case NMI_IO_APIC:
+		__get_cpu_var(wd_enabled) = 1;
+		atomic_inc(&nmi_active);
 	}
-	wd->enabled = 1;
-	atomic_inc(&nmi_active);
 }
 
 void stop_apic_nmi_watchdog(void *unused)
 {
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
 	/* only support LOCAL and IO APICs for now */
 	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
 	    (nmi_watchdog != NMI_IO_APIC))
 	    	return;
-
-	if (wd->enabled == 0)
+	if (__get_cpu_var(wd_enabled) == 0)
 		return;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_AMD:
-			if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
-				return;
-			stop_k7_watchdog();
-			break;
-		case X86_VENDOR_INTEL:
-			if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
-				stop_intel_arch_watchdog();
-				break;
-			}
-			stop_p4_watchdog();
-			break;
-		default:
-			return;
-		}
-	}
-	wd->enabled = 0;
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		lapic_watchdog_stop();
+	__get_cpu_var(wd_enabled) = 0;
 	atomic_dec(&nmi_active);
 }
 
@@ -885,9 +318,7 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
 	int sum;
 	int touched = 0;
 	int cpu = smp_processor_id();
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-	u64 dummy;
-	int rc=0;
+	int rc = 0;
 
 	/* check for other users first */
 	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
@@ -934,55 +365,20 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
 	}
 
 	/* see if the nmi watchdog went off */
-	if (wd->enabled) {
-		if (nmi_watchdog == NMI_LOCAL_APIC) {
-			rdmsrl(wd->perfctr_msr, dummy);
-			if (dummy & wd->check_bit){
-				/* this wasn't a watchdog timer interrupt */
-				goto done;
-			}
-
-			/* only Intel uses the cccr msr */
-	 		if (wd->cccr_msr != 0) {
-	 			/*
-	 			 * P4 quirks:
-	 			 * - An overflown perfctr will assert its interrupt
-	 			 *   until the OVF flag in its CCCR is cleared.
-	 			 * - LVTPC is masked on interrupt and must be
-	 			 *   unmasked by the LVTPC handler.
-	 			 */
-				rdmsrl(wd->cccr_msr, dummy);
-				dummy &= ~P4_CCCR_OVF;
-	 			wrmsrl(wd->cccr_msr, dummy);
-	 			apic_write(APIC_LVTPC, APIC_DM_NMI);
-				/* start the cycle over again */
-				wrmsrl(wd->perfctr_msr,
-				       -((u64)cpu_khz * 1000 / nmi_hz));
-	 		} else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
-				/*
-				 * ArchPerfom/Core Duo needs to re-unmask
-				 * the apic vector
-				 */
-				apic_write(APIC_LVTPC, APIC_DM_NMI);
-				/* ARCH_PERFMON has 32 bit counter writes */
-				wrmsr(wd->perfctr_msr,
-				     (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0);
-			} else {
-				/* start the cycle over again */
-				wrmsrl(wd->perfctr_msr,
-				       -((u64)cpu_khz * 1000 / nmi_hz));
-			}
-			rc = 1;
-		} else 	if (nmi_watchdog == NMI_IO_APIC) {
-			/* don't know how to accurately check for this.
-			 * just assume it was a watchdog timer interrupt
-			 * This matches the old behaviour.
-			 */
-			rc = 1;
-		} else
-			printk(KERN_WARNING "Unknown enabled NMI hardware?!\n");
+	if (!__get_cpu_var(wd_enabled))
+		return rc;
+	switch (nmi_watchdog) {
+	case NMI_LOCAL_APIC:
+		rc |= lapic_wd_event(nmi_hz);
+		break;
+	case NMI_IO_APIC:
+		/* don't know how to accurately check for this.
+		 * just assume it was a watchdog timer interrupt
+		 * This matches the old behaviour.
+		 */
+		rc = 1;
+		break;
 	}
-done:
 	return rc;
 }
 
@@ -1067,12 +463,4 @@ void __trigger_all_cpu_backtrace(void)
 
 EXPORT_SYMBOL(nmi_active);
 EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi);
-EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
-EXPORT_SYMBOL(reserve_perfctr_nmi);
-EXPORT_SYMBOL(release_perfctr_nmi);
-EXPORT_SYMBOL(reserve_evntsel_nmi);
-EXPORT_SYMBOL(release_evntsel_nmi);
-EXPORT_SYMBOL(disable_timer_nmi_watchdog);
-EXPORT_SYMBOL(enable_timer_nmi_watchdog);
 EXPORT_SYMBOL(touch_nmi_watchdog);
diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c
index 04480c3b68f..5bd20b542c1 100644
--- a/arch/x86_64/kernel/pci-calgary.c
+++ b/arch/x86_64/kernel/pci-calgary.c
@@ -507,7 +507,7 @@ error:
 	return ret;
 }
 
-static struct dma_mapping_ops calgary_dma_ops = {
+static const struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 0bae862e9a5..0a762e10f2b 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -556,7 +556,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static struct dma_mapping_ops gart_dma_ops = {
+static const struct dma_mapping_ops gart_dma_ops = {
 	.mapping_error = NULL,
 	.map_single = gart_map_single,
 	.map_simple = gart_map_simple,
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index df09ab05a1b..6dade0c867c 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -79,7 +79,7 @@ void nommu_unmap_sg(struct device *dev, struct scatterlist *sg,
 {
 }
 
-struct dma_mapping_ops nommu_dma_ops = {
+const struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.unmap_single = nommu_unmap_single,
 	.map_sg = nommu_map_sg,
diff --git a/arch/x86_64/kernel/pci-swiotlb.c b/arch/x86_64/kernel/pci-swiotlb.c
index eb18be5a656..4b4569abc60 100644
--- a/arch/x86_64/kernel/pci-swiotlb.c
+++ b/arch/x86_64/kernel/pci-swiotlb.c
@@ -12,7 +12,7 @@
 int swiotlb __read_mostly;
 EXPORT_SYMBOL(swiotlb);
 
-struct dma_mapping_ops swiotlb_dma_ops = {
+const struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index d8d5ccc245c..4f21765078b 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -288,16 +288,18 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 
 static int __init idle_setup (char *str)
 {
-	if (!strncmp(str, "poll", 4)) {
+	if (!strcmp(str, "poll")) {
 		printk("using polling idle threads.\n");
 		pm_idle = poll_idle;
-	}
+	} else if (!strcmp(str, "mwait"))
+		force_mwait = 1;
+	else
+		return -1;
 
 	boot_option_idle_override = 1;
-	return 1;
+	return 0;
 }
-
-__setup("idle=", idle_setup);
+early_param("idle", idle_setup);
 
 /* Prints also some state that isn't saved in the pt_regs */ 
 void __show_regs(struct pt_regs * regs)
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 3d98b696881..db51577bda3 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -79,6 +79,8 @@ int bootloader_type;
 
 unsigned long saved_video_mode;
 
+int force_mwait __cpuinitdata;
+
 /* 
  * Early DMI memory
  */
@@ -205,10 +207,10 @@ static void discover_ebda(void)
 	 * there is a real-mode segmented pointer pointing to the 
 	 * 4K EBDA area at 0x40E
 	 */
-	ebda_addr = *(unsigned short *)EBDA_ADDR_POINTER;
+	ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER);
 	ebda_addr <<= 4;
 
-	ebda_size = *(unsigned short *)(unsigned long)ebda_addr;
+	ebda_size = *(unsigned short *)__va(ebda_addr);
 
 	/* Round EBDA up to pages */
 	if (ebda_size == 0)
@@ -274,8 +276,6 @@ void __init setup_arch(char **cmdline_p)
 
 	dmi_scan_machine();
 
-	zap_low_mappings(0);
-
 #ifdef CONFIG_ACPI
 	/*
 	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
@@ -329,15 +329,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 #ifdef CONFIG_SMP
-	/*
-	 * But first pinch a few for the stack/trampoline stuff
-	 * FIXME: Don't need the extra page at 4K, but need to fix
-	 * trampoline before removing it. (see the GDT stuff)
-	 */
-	reserve_bootmem_generic(PAGE_SIZE, PAGE_SIZE);
-
 	/* Reserve SMP trampoline */
-	reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, PAGE_SIZE);
+	reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
 #endif
 
 #ifdef CONFIG_ACPI_SLEEP
@@ -612,6 +605,10 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 
 	/* RDTSC can be speculated around */
 	clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
+
+	/* Family 10 doesn't support C states in MWAIT so don't use it */
+	if (c->x86 == 0x10 && !force_mwait)
+		clear_bit(X86_FEATURE_MWAIT, &c->x86_capability);
 }
 
 static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -987,9 +984,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		"stc",
 		"100mhzsteps",
 		"hwpstate",
-		NULL,	/* tsc invariant mapped to constant_tsc */
-		NULL,
-		/* nothing */	/* constant_tsc - moved to flags */
+		"",	/* tsc invariant mapped to constant_tsc */
+		/* nothing */
 	};
 
 
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index 6a70b55f719..64379a80d76 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -103,9 +103,9 @@ void __init setup_per_cpu_areas(void)
 		if (!NODE_DATA(cpu_to_node(i))) {
 			printk("cpu with no node %d, num_online_nodes %d\n",
 			       i, num_online_nodes());
-			ptr = alloc_bootmem(size);
+			ptr = alloc_bootmem_pages(size);
 		} else { 
-			ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size);
+			ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
 		}
 		if (!ptr)
 			panic("Cannot allocate cpu data for CPU %d\n", i);
@@ -201,7 +201,6 @@ void __cpuinit cpu_init (void)
 	/* CPU 0 is initialised in head64.c */
 	if (cpu != 0) {
 		pda_init(cpu);
-		zap_low_mappings(cpu);
 	} else 
 		estacks = boot_exception_stacks; 
 
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index 49ec324cd14..c819625f331 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -141,7 +141,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 		goto badframe;
 
 #ifdef DEBUG_SIG
-	printk("%d sigreturn rip:%lx rsp:%lx frame:%p rax:%lx\n",current->pid,regs.rip,regs.rsp,frame,eax);
+	printk("%d sigreturn rip:%lx rsp:%lx frame:%p rax:%lx\n",current->pid,regs->rip,regs->rsp,frame,eax);
 #endif
 
 	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->rsp) == -EFAULT)
@@ -301,7 +301,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 #ifdef DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
+	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n",
 		current->comm, current->pid, frame, regs->rip, frame->pretcode);
 #endif
 
@@ -463,7 +463,7 @@ void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
 #ifdef DEBUG_SIG
-	printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%lx pending:%lx\n",
+	printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%p pending:%x\n",
 	       thread_info_flags, regs->rip, regs->rsp, __builtin_return_address(0),signal_pending(current)); 
 #endif
 	       
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index af1ec4d23cf..bd1d123947c 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -452,42 +452,34 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
 }
 EXPORT_SYMBOL(smp_call_function);
 
-void smp_stop_cpu(void)
+static void stop_this_cpu(void *dummy)
 {
-	unsigned long flags;
+	local_irq_disable();
 	/*
 	 * Remove this CPU:
 	 */
 	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_save(flags);
 	disable_local_APIC();
-	local_irq_restore(flags);
-}
-
-static void smp_really_stop_cpu(void *dummy)
-{
-	smp_stop_cpu(); 
 	for (;;) 
 		halt();
 } 
 
 void smp_send_stop(void)
 {
-	int nolock = 0;
+	int nolock;
+	unsigned long flags;
+
 	if (reboot_force)
 		return;
+
 	/* Don't deadlock on the call lock in panic */
-	if (!spin_trylock(&call_lock)) {
-		/* ignore locking because we have panicked anyways */
-		nolock = 1;
-	}
-	__smp_call_function(smp_really_stop_cpu, NULL, 0, 0);
+	nolock = !spin_trylock(&call_lock);
+	local_irq_save(flags);
+	__smp_call_function(stop_this_cpu, NULL, 0, 0);
 	if (!nolock)
 		spin_unlock(&call_lock);
-
-	local_irq_disable();
 	disable_local_APIC();
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 /*
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index cd4643a3702..4d9dacfae57 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -60,7 +60,6 @@
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
 #include <asm/numa.h>
-#include <asm/genapic.h>
 
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
@@ -68,7 +67,6 @@ EXPORT_SYMBOL(smp_num_siblings);
 
 /* Last level cache ID of each logical CPU */
 u8 cpu_llc_id[NR_CPUS] __cpuinitdata  = {[0 ... NR_CPUS-1] = BAD_APICID};
-EXPORT_SYMBOL(cpu_llc_id);
 
 /* Bitmask of currently online CPUs */
 cpumask_t cpu_online_map __read_mostly;
@@ -392,7 +390,8 @@ static void inquire_remote_apic(int apicid)
 {
 	unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
 	char *names[] = { "ID", "VERSION", "SPIV" };
-	int timeout, status;
+	int timeout;
+	unsigned int status;
 
 	printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
 
@@ -402,7 +401,9 @@ static void inquire_remote_apic(int apicid)
 		/*
 		 * Wait for idle.
 		 */
-		apic_wait_icr_idle();
+		status = safe_apic_wait_icr_idle();
+		if (status)
+			printk("a previous APIC delivery may have failed\n");
 
 		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
 		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
@@ -430,8 +431,8 @@ static void inquire_remote_apic(int apicid)
  */
 static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
 {
-	unsigned long send_status = 0, accept_status = 0;
-	int maxlvt, timeout, num_starts, j;
+	unsigned long send_status, accept_status = 0;
+	int maxlvt, num_starts, j;
 
 	Dprintk("Asserting INIT.\n");
 
@@ -447,12 +448,7 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
 				| APIC_DM_INIT);
 
 	Dprintk("Waiting for send to finish...\n");
-	timeout = 0;
-	do {
-		Dprintk("+");
-		udelay(100);
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-	} while (send_status && (timeout++ < 1000));
+	send_status = safe_apic_wait_icr_idle();
 
 	mdelay(10);
 
@@ -465,12 +461,7 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
 	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
 
 	Dprintk("Waiting for send to finish...\n");
-	timeout = 0;
-	do {
-		Dprintk("+");
-		udelay(100);
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-	} while (send_status && (timeout++ < 1000));
+	send_status = safe_apic_wait_icr_idle();
 
 	mb();
 	atomic_set(&init_deasserted, 1);
@@ -509,12 +500,7 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
 		Dprintk("Startup point 1.\n");
 
 		Dprintk("Waiting for send to finish...\n");
-		timeout = 0;
-		do {
-			Dprintk("+");
-			udelay(100);
-			send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-		} while (send_status && (timeout++ < 1000));
+		send_status = safe_apic_wait_icr_idle();
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
@@ -945,6 +931,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
  		return -ENOSYS;
 	}
 
+	/*
+	 * Save current MTRR state in case it was changed since early boot
+	 * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
+	 */
+	mtrr_save_state();
+
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 	/* Boot it! */
 	err = do_boot_cpu(cpu, apicid);
@@ -965,13 +957,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	while (!cpu_isset(cpu, cpu_online_map))
 		cpu_relax();
-
-	if (num_online_cpus() > 8 && genapic == &apic_flat) {
-		printk(KERN_WARNING
-		       "flat APIC routing can't be used with > 8 cpus\n");
-		BUG();
-	}
-
 	err = 0;
 
 	return err;
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c
index 91f7e678bae..6a5a98f2a75 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86_64/kernel/suspend.c
@@ -12,6 +12,10 @@
 #include <asm/proto.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/mtrr.h>
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
 
 struct saved_context saved_context;
 
@@ -33,7 +37,6 @@ void __save_processor_state(struct saved_context *ctxt)
 	asm volatile ("str %0"  : "=m" (ctxt->tr));
 
 	/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
-	/* EFER should be constant for kernel version, no need to handle it. */
 	/*
 	 * segment registers
 	 */
@@ -46,10 +49,12 @@ void __save_processor_state(struct saved_context *ctxt)
 	rdmsrl(MSR_FS_BASE, ctxt->fs_base);
 	rdmsrl(MSR_GS_BASE, ctxt->gs_base);
 	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+	mtrr_save_fixed_ranges(NULL);
 
 	/*
 	 * control registers 
 	 */
+	rdmsrl(MSR_EFER, ctxt->efer);
 	asm volatile ("movq %%cr0, %0" : "=r" (ctxt->cr0));
 	asm volatile ("movq %%cr2, %0" : "=r" (ctxt->cr2));
 	asm volatile ("movq %%cr3, %0" : "=r" (ctxt->cr3));
@@ -75,6 +80,7 @@ void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
+	wrmsrl(MSR_EFER, ctxt->efer);
 	asm volatile ("movq %0, %%cr8" :: "r" (ctxt->cr8));
 	asm volatile ("movq %0, %%cr4" :: "r" (ctxt->cr4));
 	asm volatile ("movq %0, %%cr3" :: "r" (ctxt->cr3));
@@ -219,4 +225,15 @@ int swsusp_arch_resume(void)
 	restore_image();
 	return 0;
 }
+
+/*
+ *	pfn_is_nosave - check if given pfn is in the 'nosave' section
+ */
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
+	return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
+}
 #endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S
index bfbe00763c6..16d183f67bc 100644
--- a/arch/x86_64/kernel/suspend_asm.S
+++ b/arch/x86_64/kernel/suspend_asm.S
@@ -71,9 +71,10 @@ loop:
 	jmp	loop
 done:
 	/* go back to the original page tables */
-	leaq	init_level4_pgt(%rip), %rax
-	subq	$__START_KERNEL_map, %rax
-	movq	%rax, %cr3
+	movq    $(init_level4_pgt - __START_KERNEL_map), %rax
+	addq    phys_base(%rip), %rax
+	movq    %rax, %cr3
+
 	/* Flush TLB, including "global" things (vmalloc) */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c
index 76bf7c241fe..f891931eb75 100644
--- a/arch/x86_64/kernel/sys_x86_64.c
+++ b/arch/x86_64/kernel/sys_x86_64.c
@@ -93,6 +93,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	unsigned long start_addr;
 	unsigned long begin, end;
 	
+	if (flags & MAP_FIXED)
+		return addr;
+
 	find_start_end(flags, &begin, &end); 
 
 	if (len > end)
diff --git a/arch/x86_64/kernel/syscall.c b/arch/x86_64/kernel/syscall.c
index 213fd6ab789..63d592c276c 100644
--- a/arch/x86_64/kernel/syscall.c
+++ b/arch/x86_64/kernel/syscall.c
@@ -3,6 +3,7 @@
 #include <linux/linkage.h>
 #include <linux/sys.h>
 #include <linux/cache.h>
+#include <asm/asm-offsets.h>
 
 #define __NO_STUBS
 
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 75d73a9aa9f..0652e173813 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -39,13 +39,11 @@
 #include <asm/proto.h>
 #include <asm/hpet.h>
 #include <asm/sections.h>
-#include <linux/cpufreq.h>
 #include <linux/hpet.h>
 #include <asm/apic.h>
 #include <asm/hpet.h>
-
-extern void i8254_timer_resume(void);
-extern int using_apic_timer;
+#include <asm/mpspec.h>
+#include <asm/nmi.h>
 
 static char *timename = NULL;
 
@@ -252,6 +250,51 @@ static unsigned long get_cmos_time(void)
 	return mktime(year, mon, day, hour, min, sec);
 }
 
+/* calibrate_cpu is used on systems with fixed rate TSCs to determine
+ * processor frequency */
+#define TICK_COUNT 100000000
+static unsigned int __init tsc_calibrate_cpu_khz(void)
+{
+       int tsc_start, tsc_now;
+       int i, no_ctr_free;
+       unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
+       unsigned long flags;
+
+       for (i = 0; i < 4; i++)
+               if (avail_to_resrv_perfctr_nmi_bit(i))
+                       break;
+       no_ctr_free = (i == 4);
+       if (no_ctr_free) {
+               i = 3;
+               rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
+               wrmsrl(MSR_K7_EVNTSEL3, 0);
+               rdmsrl(MSR_K7_PERFCTR3, pmc3);
+       } else {
+               reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+               reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+       }
+       local_irq_save(flags);
+       /* start meauring cycles, incrementing from 0 */
+       wrmsrl(MSR_K7_PERFCTR0 + i, 0);
+       wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
+       rdtscl(tsc_start);
+       do {
+               rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
+               tsc_now = get_cycles_sync();
+       } while ((tsc_now - tsc_start) < TICK_COUNT);
+
+       local_irq_restore(flags);
+       if (no_ctr_free) {
+               wrmsrl(MSR_K7_EVNTSEL3, 0);
+               wrmsrl(MSR_K7_PERFCTR3, pmc3);
+               wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
+       } else {
+               release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+               release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+       }
+
+       return pmc_now * tsc_khz / (tsc_now - tsc_start);
+}
 
 /*
  * pit_calibrate_tsc() uses the speaker output (channel 2) of
@@ -285,7 +328,7 @@ static unsigned int __init pit_calibrate_tsc(void)
 #define PIT_MODE 0x43
 #define PIT_CH0  0x40
 
-static void __init __pit_init(int val, u8 mode)
+static void __pit_init(int val, u8 mode)
 {
 	unsigned long flags;
 
@@ -301,12 +344,12 @@ void __init pit_init(void)
 	__pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */
 }
 
-void __init pit_stop_interrupt(void)
+void pit_stop_interrupt(void)
 {
 	__pit_init(0, 0x30); /* mode 0 */
 }
 
-void __init stop_timer_interrupt(void)
+void stop_timer_interrupt(void)
 {
 	char *name;
 	if (hpet_address) {
@@ -339,23 +382,29 @@ void __init time_init(void)
 	if (hpet_use_timer) {
 		/* set tick_nsec to use the proper rate for HPET */
 	  	tick_nsec = TICK_NSEC_HPET;
-		cpu_khz = hpet_calibrate_tsc();
+		tsc_khz = hpet_calibrate_tsc();
 		timename = "HPET";
 	} else {
 		pit_init();
-		cpu_khz = pit_calibrate_tsc();
+		tsc_khz = pit_calibrate_tsc();
 		timename = "PIT";
 	}
 
+	cpu_khz = tsc_khz;
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
+		boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+		boot_cpu_data.x86 == 16)
+		cpu_khz = tsc_calibrate_cpu_khz();
+
 	if (unsynchronized_tsc())
-		mark_tsc_unstable();
+		mark_tsc_unstable("TSCs unsynchronized");
 
 	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
 		vgetcpu_mode = VGETCPU_RDTSCP;
 	else
 		vgetcpu_mode = VGETCPU_LSL;
 
-	set_cyc2ns_scale(cpu_khz);
+	set_cyc2ns_scale(tsc_khz);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
 	init_tsc_clocksource();
diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S
index c79b99a9e2f..e7e2764c461 100644
--- a/arch/x86_64/kernel/trampoline.S
+++ b/arch/x86_64/kernel/trampoline.S
@@ -3,6 +3,7 @@
  *	Trampoline.S	Derived from Setup.S by Linus Torvalds
  *
  *	4 Jan 1997 Michael Chastain: changed to gnu as.
+ *	15 Sept 2005 Eric Biederman: 64bit PIC support
  *
  *	Entry: CS:IP point to the start of our code, we are 
  *	in real mode with no stack, but the rest of the 
@@ -17,15 +18,20 @@
  *	and IP is zero.  Thus, data addresses need to be absolute
  *	(no relocation) and are taken with regard to r_base.
  *
+ *	With the addition of trampoline_level4_pgt this code can
+ *	now enter a 64bit kernel that lives at arbitrary 64bit
+ *	physical addresses.
+ *
  *	If you work on this file, check the object module with objdump
  *	--full-contents --reloc to make sure there are no relocation
- *	entries. For the GDT entry we do hand relocation in smpboot.c
- *	because of 64bit linker limitations.
+ *	entries.
  */
 
 #include <linux/linkage.h>
-#include <asm/segment.h>
+#include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/msr.h>
+#include <asm/segment.h>
 
 .data
 
@@ -33,15 +39,33 @@
 
 ENTRY(trampoline_data)
 r_base = .
+	cli			# We should be safe anyway
 	wbinvd	
 	mov	%cs, %ax	# Code and data in the same place
 	mov	%ax, %ds
+	mov	%ax, %es
+	mov	%ax, %ss
 
-	cli			# We should be safe anyway
 
 	movl	$0xA5A5A5A5, trampoline_data - r_base
 				# write marker for master knows we're running
 
+					# Setup stack
+	movw	$(trampoline_stack_end - r_base), %sp
+
+	call	verify_cpu		# Verify the cpu supports long mode
+	testl   %eax, %eax		# Check for return code
+	jnz	no_longmode
+
+	mov	%cs, %ax
+	movzx	%ax, %esi		# Find the 32bit trampoline location
+	shll	$4, %esi
+
+					# Fixup the vectors
+	addl	%esi, startup_32_vector - r_base
+	addl	%esi, startup_64_vector - r_base
+	addl	%esi, tgdt + 2 - r_base	# Fixup the gdt pointer
+
 	/*
 	 * GDT tables in non default location kernel can be beyond 16MB and
 	 * lgdt will not be able to load the address as in real mode default
@@ -49,23 +73,94 @@ r_base = .
 	 * to 32 bit.
 	 */
 
-	lidtl	idt_48 - r_base	# load idt with 0, 0
-	lgdtl	gdt_48 - r_base	# load gdt with whatever is appropriate
+	lidtl	tidt - r_base	# load idt with 0, 0
+	lgdtl	tgdt - r_base	# load gdt with whatever is appropriate
 
 	xor	%ax, %ax
 	inc	%ax		# protected mode (PE) bit
 	lmsw	%ax		# into protected mode
-	# flaush prefetch and jump to startup_32 in arch/x86_64/kernel/head.S
-	ljmpl	$__KERNEL32_CS, $(startup_32-__START_KERNEL_map)
+
+	# flush prefetch and jump to startup_32
+	ljmpl	*(startup_32_vector - r_base)
+
+	.code32
+	.balign 4
+startup_32:
+	movl	$__KERNEL_DS, %eax	# Initialize the %ds segment register
+	movl	%eax, %ds
+
+	xorl	%eax, %eax
+	btsl	$5, %eax		# Enable PAE mode
+	movl	%eax, %cr4
+
+					# Setup trampoline 4 level pagetables
+	leal	(trampoline_level4_pgt - r_base)(%esi), %eax
+	movl	%eax, %cr3
+
+	movl	$MSR_EFER, %ecx
+	movl	$(1 << _EFER_LME), %eax	# Enable Long Mode
+	xorl	%edx, %edx
+	wrmsr
+
+	xorl	%eax, %eax
+	btsl	$31, %eax		# Enable paging and in turn activate Long Mode
+	btsl	$0, %eax		# Enable protected mode
+	movl	%eax, %cr0
+
+	/*
+	 * At this point we're in long mode but in 32bit compatibility mode
+	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
+	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
+	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+	 */
+	ljmp	*(startup_64_vector - r_base)(%esi)
+
+	.code64
+	.balign 4
+startup_64:
+	# Now jump into the kernel using virtual addresses
+	movq	$secondary_startup_64, %rax
+	jmp	*%rax
+
+	.code16
+no_longmode:
+	hlt
+	jmp no_longmode
+#include "verify_cpu.S"
 
 	# Careful these need to be in the same 64K segment as the above;
-idt_48:
+tidt:
 	.word	0			# idt limit = 0
 	.word	0, 0			# idt base = 0L
 
-gdt_48:
-	.short	GDT_ENTRIES*8 - 1	# gdt limit
-	.long	cpu_gdt_table-__START_KERNEL_map
+	# Duplicate the global descriptor table
+	# so the kernel can live anywhere
+	.balign 4
+tgdt:
+	.short	tgdt_end - tgdt		# gdt limit
+	.long	tgdt - r_base
+	.short 0
+	.quad	0x00cf9b000000ffff	# __KERNEL32_CS
+	.quad	0x00af9b000000ffff	# __KERNEL_CS
+	.quad	0x00cf93000000ffff	# __KERNEL_DS
+tgdt_end:
+
+	.balign 4
+startup_32_vector:
+	.long	startup_32 - r_base
+	.word	__KERNEL32_CS, 0
+
+	.balign 4
+startup_64_vector:
+	.long	startup_64 - r_base
+	.word	__KERNEL_CS, 0
+
+trampoline_stack:
+	.org 0x1000
+trampoline_stack_end:
+ENTRY(trampoline_level4_pgt)
+	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
+	.fill	510,8,0
+	.quad	level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
 
-.globl trampoline_end
-trampoline_end:	
+ENTRY(trampoline_end)
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 09d2e8a10a4..d76fc32d459 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -426,8 +426,7 @@ void show_registers(struct pt_regs *regs)
 	const int cpu = smp_processor_id();
 	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
 
-		rsp = regs->rsp;
-
+	rsp = regs->rsp;
 	printk("CPU %d ", cpu);
 	__show_regs(regs);
 	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
@@ -438,7 +437,6 @@ void show_registers(struct pt_regs *regs)
 	 * time of the fault..
 	 */
 	if (in_kernel) {
-
 		printk("Stack: ");
 		_show_stack(NULL, regs, (unsigned long*)rsp);
 
@@ -581,10 +579,20 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 {
 	struct task_struct *tsk = current;
 
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = trapnr;
-
 	if (user_mode(regs)) {
+		/*
+		 * We want error_code and trap_no set for userspace
+		 * faults and kernelspace faults which result in
+		 * die(), but not kernelspace faults which are fixed
+		 * up.  die() gives the process no chance to handle
+		 * the signal and notice the kernel fault information,
+		 * so that won't result in polluting the information
+		 * about previously queued, but not yet delivered,
+		 * faults.  See also do_general_protection below.
+		 */
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = trapnr;
+
 		if (exception_trace && unhandled_signal(tsk, signr))
 			printk(KERN_INFO
 			       "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n",
@@ -605,8 +613,11 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 		fixup = search_exception_tables(regs->rip);
 		if (fixup)
 			regs->rip = fixup->fixup;
-		else	
+		else {
+			tsk->thread.error_code = error_code;
+			tsk->thread.trap_no = trapnr;
 			die(str, regs, error_code);
+		}
 		return;
 	}
 }
@@ -682,10 +693,10 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 
 	conditional_sti(regs);
 
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 13;
-
 	if (user_mode(regs)) {
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = 13;
+
 		if (exception_trace && unhandled_signal(tsk, SIGSEGV))
 			printk(KERN_INFO
 		       "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n",
@@ -704,6 +715,9 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 			regs->rip = fixup->fixup;
 			return;
 		}
+
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = 13;
 		if (notify_die(DIE_GPF, "general protection fault", regs,
 					error_code, 13, SIGSEGV) == NOTIFY_STOP)
 			return;
diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c
index 1a0edbbffaa..48f9a8e6aa9 100644
--- a/arch/x86_64/kernel/tsc.c
+++ b/arch/x86_64/kernel/tsc.c
@@ -13,6 +13,8 @@ static int notsc __initdata = 0;
 
 unsigned int cpu_khz;		/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
+unsigned int tsc_khz;
+EXPORT_SYMBOL(tsc_khz);
 
 static unsigned int cyc2ns_scale __read_mostly;
 
@@ -77,7 +79,7 @@ static void handle_cpufreq_delayed_get(struct work_struct *v)
 static unsigned int  ref_freq = 0;
 static unsigned long loops_per_jiffy_ref = 0;
 
-static unsigned long cpu_khz_ref = 0;
+static unsigned long tsc_khz_ref = 0;
 
 static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 				 void *data)
@@ -99,7 +101,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	if (!ref_freq) {
 		ref_freq = freq->old;
 		loops_per_jiffy_ref = *lpj;
-		cpu_khz_ref = cpu_khz;
+		tsc_khz_ref = tsc_khz;
 	}
 	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
 		(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
@@ -107,12 +109,12 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 		*lpj =
 		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
 
-		cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
 		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			mark_tsc_unstable();
+			mark_tsc_unstable("cpufreq changes");
 	}
 
-	set_cyc2ns_scale(cpu_khz_ref);
+	set_cyc2ns_scale(tsc_khz_ref);
 
 	return 0;
 }
@@ -197,10 +199,11 @@ static struct clocksource clocksource_tsc = {
 	.vread			= vread_tsc,
 };
 
-void mark_tsc_unstable(void)
+void mark_tsc_unstable(char *reason)
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
+		printk("Marking TSC unstable due to %s\n", reason);
 		/* Change only the rating, when not registered */
 		if (clocksource_tsc.mult)
 			clocksource_change_rating(&clocksource_tsc, 0);
@@ -213,7 +216,7 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 void __init init_tsc_clocksource(void)
 {
 	if (!notsc) {
-		clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
+		clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
 							clocksource_tsc.shift);
 		if (check_tsc_unstable())
 			clocksource_tsc.rating = 0;
diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c
index 014f0db45df..355f5f506c8 100644
--- a/arch/x86_64/kernel/tsc_sync.c
+++ b/arch/x86_64/kernel/tsc_sync.c
@@ -50,7 +50,7 @@ static __cpuinit void check_tsc_warp(void)
 	/*
 	 * The measurement runs for 20 msecs:
 	 */
-	end = start + cpu_khz * 20ULL;
+	end = start + tsc_khz * 20ULL;
 	now = start;
 
 	for (i = 0; ; i++) {
@@ -138,7 +138,7 @@ void __cpuinit check_tsc_sync_source(int cpu)
 		printk("\n");
 		printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
 				    " turning off TSC clock.\n", max_warp);
-		mark_tsc_unstable();
+		mark_tsc_unstable("check_tsc_sync_source failed");
 		nr_warps = 0;
 		max_warp = 0;
 		last_tsc = 0;
diff --git a/arch/x86_64/kernel/verify_cpu.S b/arch/x86_64/kernel/verify_cpu.S
new file mode 100644
index 00000000000..e035f594819
--- /dev/null
+++ b/arch/x86_64/kernel/verify_cpu.S
@@ -0,0 +1,119 @@
+/*
+ *
+ *	verify_cpu.S - Code for cpu long mode and SSE verification. This
+ *	code has been borrowed from boot/setup.S and was introduced by
+ * 	Andi Kleen.
+ *
+ *	Copyright (c) 2007  Andi Kleen (ak@suse.de)
+ *	Copyright (c) 2007  Eric Biederman (ebiederm@xmission.com)
+ *	Copyright (c) 2007  Vivek Goyal (vgoyal@in.ibm.com)
+ *
+ * 	This source code is licensed under the GNU General Public License,
+ * 	Version 2.  See the file COPYING for more details.
+ *
+ *	This is a common code for verification whether CPU supports
+ * 	long mode and SSE or not. It is not called directly instead this
+ *	file is included at various places and compiled in that context.
+ * 	Following are the current usage.
+ *
+ * 	This file is included by both 16bit and 32bit code.
+ *
+ *	arch/x86_64/boot/setup.S : Boot cpu verification (16bit)
+ *	arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit)
+ *	arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit)
+ *	arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit)
+ *
+ *	verify_cpu, returns the status of cpu check in register %eax.
+ *		0: Success    1: Failure
+ *
+ * 	The caller needs to check for the error code and take the action
+ * 	appropriately. Either display a message or halt.
+ */
+
+#include <asm/cpufeature.h>
+
+verify_cpu:
+	pushfl				# Save caller passed flags
+	pushl	$0			# Kill any dangerous flags
+	popfl
+
+	/* minimum CPUID flags for x86-64 as defined by AMD */
+#define M(x) (1<<(x))
+#define M2(a,b) M(a)|M(b)
+#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d)
+
+#define SSE_MASK \
+	(M2(X86_FEATURE_XMM,X86_FEATURE_XMM2))
+#define REQUIRED_MASK1 \
+	(M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\
+	 M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\
+	 M(X86_FEATURE_FXSR))
+#define REQUIRED_MASK2 \
+	(M(X86_FEATURE_LM - 32))
+
+	pushfl				# standard way to check for cpuid
+	popl	%eax
+	movl	%eax,%ebx
+	xorl	$0x200000,%eax
+	pushl	%eax
+	popfl
+	pushfl
+	popl	%eax
+	cmpl	%eax,%ebx
+	jz	verify_cpu_no_longmode	# cpu has no cpuid
+
+	movl	$0x0,%eax		# See if cpuid 1 is implemented
+	cpuid
+	cmpl	$0x1,%eax
+	jb	verify_cpu_no_longmode	# no cpuid 1
+
+	xor	%di,%di
+	cmpl	$0x68747541,%ebx	# AuthenticAMD
+	jnz	verify_cpu_noamd
+	cmpl	$0x69746e65,%edx
+	jnz	verify_cpu_noamd
+	cmpl	$0x444d4163,%ecx
+	jnz	verify_cpu_noamd
+	mov	$1,%di			# cpu is from AMD
+
+verify_cpu_noamd:
+	movl    $0x1,%eax		# Does the cpu have what it takes
+	cpuid
+	andl	$REQUIRED_MASK1,%edx
+	xorl	$REQUIRED_MASK1,%edx
+	jnz	verify_cpu_no_longmode
+
+	movl    $0x80000000,%eax	# See if extended cpuid is implemented
+	cpuid
+	cmpl    $0x80000001,%eax
+	jb      verify_cpu_no_longmode	# no extended cpuid
+
+	movl    $0x80000001,%eax	# Does the cpu have what it takes
+	cpuid
+	andl    $REQUIRED_MASK2,%edx
+	xorl    $REQUIRED_MASK2,%edx
+	jnz     verify_cpu_no_longmode
+
+verify_cpu_sse_test:
+	movl	$1,%eax
+	cpuid
+	andl	$SSE_MASK,%edx
+	cmpl	$SSE_MASK,%edx
+	je	verify_cpu_sse_ok
+	test	%di,%di
+	jz	verify_cpu_no_longmode	# only try to force SSE on AMD
+	movl	$0xc0010015,%ecx	# HWCR
+	rdmsr
+	btr	$15,%eax		# enable SSE
+	wrmsr
+	xor	%di,%di			# don't loop
+	jmp	verify_cpu_sse_test	# try again
+
+verify_cpu_no_longmode:
+	popfl				# Restore caller passed flags
+	movl $1,%eax
+	ret
+verify_cpu_sse_ok:
+	popfl				# Restore caller passed flags
+	xorl %eax, %eax
+	ret
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index 5176ecf006e..88cfa50b424 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -29,9 +29,7 @@ SECTIONS
   .text :  AT(ADDR(.text) - LOAD_OFFSET) {
 	/* First the code that has to be first for bootstrapping */
 	*(.bootstrap.text)
-	/* Then all the functions that are "hot" in profiles, to group them
-           onto the same hugetlb entry */
-	#include "functionlist"
+	_stext = .;
 	/* Then the rest */
 	*(.text)
 	SCHED_TEXT
@@ -50,10 +48,10 @@ SECTIONS
   __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
   __stop___ex_table = .;
 
-  RODATA
-
   BUG_TABLE
 
+  RODATA
+
   . = ALIGN(PAGE_SIZE);        /* Align data segment to page size boundary */
 				/* Data */
   .data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -94,6 +92,12 @@ SECTIONS
 		{ *(.vsyscall_gtod_data) }
   vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
 
+
+  .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
+		{ *(.vsyscall_1) }
+  .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
+		{ *(.vsyscall_2) }
+
   .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
   vgetcpu_mode = VVIRT(.vgetcpu_mode);
 
@@ -101,10 +105,6 @@ SECTIONS
   .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
   jiffies = VVIRT(.jiffies);
 
-  .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
-		{ *(.vsyscall_1) }
-  .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
-		{ *(.vsyscall_2) }
   .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
 		{ *(.vsyscall_3) }
 
@@ -194,7 +194,7 @@ SECTIONS
   __initramfs_end = .;
 #endif
 
-    . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+  . = ALIGN(4096);
   __per_cpu_start = .;
   .data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
   __per_cpu_end = .;
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
index b43c698cf7d..dc32cef9619 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -45,14 +45,34 @@
 
 #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
 #define __syscall_clobber "r11","rcx","memory"
+#define __pa_vsymbol(x)			\
+	({unsigned long v;  		\
+	extern char __vsyscall_0; 	\
+	  asm("" : "=r" (v) : "0" (x)); \
+	  ((v - VSYSCALL_FIRST_PAGE) + __pa_symbol(&__vsyscall_0)); })
 
+/*
+ * vsyscall_gtod_data contains data that is :
+ * - readonly from vsyscalls
+ * - writen by timer interrupt or systcl (/proc/sys/kernel/vsyscall64)
+ * Try to keep this structure as small as possible to avoid cache line ping pongs
+ */
 struct vsyscall_gtod_data_t {
-	seqlock_t lock;
-	int sysctl_enabled;
-	struct timeval wall_time_tv;
+	seqlock_t	lock;
+
+	/* open coded 'struct timespec' */
+	time_t		wall_time_sec;
+	u32		wall_time_nsec;
+
+	int		sysctl_enabled;
 	struct timezone sys_tz;
-	cycle_t offset_base;
-	struct clocksource clock;
+	struct { /* extract of a clocksource struct */
+		cycle_t (*vread)(void);
+		cycle_t	cycle_last;
+		cycle_t	mask;
+		u32	mult;
+		u32	shift;
+	} clock;
 };
 int __vgetcpu_mode __section_vgetcpu_mode;
 
@@ -68,9 +88,13 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 
 	write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
 	/* copy vsyscall data */
-	vsyscall_gtod_data.clock = *clock;
-	vsyscall_gtod_data.wall_time_tv.tv_sec = wall_time->tv_sec;
-	vsyscall_gtod_data.wall_time_tv.tv_usec = wall_time->tv_nsec/1000;
+	vsyscall_gtod_data.clock.vread = clock->vread;
+	vsyscall_gtod_data.clock.cycle_last = clock->cycle_last;
+	vsyscall_gtod_data.clock.mask = clock->mask;
+	vsyscall_gtod_data.clock.mult = clock->mult;
+	vsyscall_gtod_data.clock.shift = clock->shift;
+	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
+	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
 	vsyscall_gtod_data.sys_tz = sys_tz;
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
@@ -105,7 +129,8 @@ static __always_inline long time_syscall(long *t)
 static __always_inline void do_vgettimeofday(struct timeval * tv)
 {
 	cycle_t now, base, mask, cycle_delta;
-	unsigned long seq, mult, shift, nsec_delta;
+	unsigned seq;
+	unsigned long mult, shift, nsec;
 	cycle_t (*vread)(void);
 	do {
 		seq = read_seqbegin(&__vsyscall_gtod_data.lock);
@@ -121,21 +146,20 @@ static __always_inline void do_vgettimeofday(struct timeval * tv)
 		mult = __vsyscall_gtod_data.clock.mult;
 		shift = __vsyscall_gtod_data.clock.shift;
 
-		*tv = __vsyscall_gtod_data.wall_time_tv;
-
+		tv->tv_sec = __vsyscall_gtod_data.wall_time_sec;
+		nsec = __vsyscall_gtod_data.wall_time_nsec;
 	} while (read_seqretry(&__vsyscall_gtod_data.lock, seq));
 
 	/* calculate interval: */
 	cycle_delta = (now - base) & mask;
 	/* convert to nsecs: */
-	nsec_delta = (cycle_delta * mult) >> shift;
+	nsec += (cycle_delta * mult) >> shift;
 
-	/* convert to usecs and add to timespec: */
-	tv->tv_usec += nsec_delta / NSEC_PER_USEC;
-	while (tv->tv_usec > USEC_PER_SEC) {
+	while (nsec >= NSEC_PER_SEC) {
 		tv->tv_sec += 1;
-		tv->tv_usec -= USEC_PER_SEC;
+		nsec -= NSEC_PER_SEC;
 	}
+	tv->tv_usec = nsec / NSEC_PER_USEC;
 }
 
 int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
@@ -151,11 +175,13 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
  * unlikely */
 time_t __vsyscall(1) vtime(time_t *t)
 {
+	time_t result;
 	if (unlikely(!__vsyscall_gtod_data.sysctl_enabled))
 		return time_syscall(t);
-	else if (t)
-		*t = __vsyscall_gtod_data.wall_time_tv.tv_sec;
-	return __vsyscall_gtod_data.wall_time_tv.tv_sec;
+	result = __vsyscall_gtod_data.wall_time_sec;
+	if (t)
+		*t = result;
+	return result;
 }
 
 /* Fast way to get current CPU and node.
@@ -224,10 +250,10 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
 		return ret;
 	/* gcc has some trouble with __va(__pa()), so just do it this
 	   way. */
-	map1 = ioremap(__pa_symbol(&vsysc1), 2);
+	map1 = ioremap(__pa_vsymbol(&vsysc1), 2);
 	if (!map1)
 		return -ENOMEM;
-	map2 = ioremap(__pa_symbol(&vsysc2), 2);
+	map2 = ioremap(__pa_vsymbol(&vsysc2), 2);
 	if (!map2) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 6ada7231f3a..de99dba2c51 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -585,7 +585,7 @@ do_sigbus:
 }
 
 DEFINE_SPINLOCK(pgd_lock);
-struct page *pgd_list;
+LIST_HEAD(pgd_list);
 
 void vmalloc_sync_all(void)
 {
@@ -605,8 +605,7 @@ void vmalloc_sync_all(void)
 			if (pgd_none(*pgd_ref))
 				continue;
 			spin_lock(&pgd_lock);
-			for (page = pgd_list; page;
-			     page = (struct page *)page->index) {
+			list_for_each_entry(page, &pgd_list, lru) {
 				pgd_t *pgd;
 				pgd = (pgd_t *)page_address(page) + pgd_index(address);
 				if (pgd_none(*pgd))
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index ec31534eb10..c0822683b91 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -22,10 +22,12 @@
 #include <linux/bootmem.h>
 #include <linux/proc_fs.h>
 #include <linux/pci.h>
+#include <linux/pfn.h>
 #include <linux/poison.h>
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
+#include <linux/nmi.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -46,7 +48,7 @@
 #define Dprintk(x...)
 #endif
 
-struct dma_mapping_ops* dma_ops;
+const struct dma_mapping_ops* dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static unsigned long dma_reserve __initdata;
@@ -72,6 +74,11 @@ void show_mem(void)
 
 	for_each_online_pgdat(pgdat) {
                for (i = 0; i < pgdat->node_spanned_pages; ++i) {
+			/* this loop can take a while with 256 GB and 4k pages
+			   so update the NMI watchdog */
+			if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) {
+				touch_nmi_watchdog();
+			}
 			page = pfn_to_page(pgdat->node_start_pfn + i);
 			total++;
 			if (PageReserved(page))
@@ -167,23 +174,9 @@ __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 
 unsigned long __initdata table_start, table_end; 
 
-extern pmd_t temp_boot_pmds[]; 
-
-static  struct temp_map { 
-	pmd_t *pmd;
-	void  *address; 
-	int    allocated; 
-} temp_mappings[] __initdata = { 
-	{ &temp_boot_pmds[0], (void *)(40UL * 1024 * 1024) },
-	{ &temp_boot_pmds[1], (void *)(42UL * 1024 * 1024) }, 
-	{}
-}; 
-
-static __meminit void *alloc_low_page(int *index, unsigned long *phys)
+static __meminit void *alloc_low_page(unsigned long *phys)
 { 
-	struct temp_map *ti;
-	int i; 
-	unsigned long pfn = table_end++, paddr; 
+	unsigned long pfn = table_end++;
 	void *adr;
 
 	if (after_bootmem) {
@@ -194,57 +187,63 @@ static __meminit void *alloc_low_page(int *index, unsigned long *phys)
 
 	if (pfn >= end_pfn) 
 		panic("alloc_low_page: ran out of memory"); 
-	for (i = 0; temp_mappings[i].allocated; i++) {
-		if (!temp_mappings[i].pmd) 
-			panic("alloc_low_page: ran out of temp mappings"); 
-	} 
-	ti = &temp_mappings[i];
-	paddr = (pfn << PAGE_SHIFT) & PMD_MASK; 
-	set_pmd(ti->pmd, __pmd(paddr | _KERNPG_TABLE | _PAGE_PSE)); 
-	ti->allocated = 1; 
-	__flush_tlb(); 	       
-	adr = ti->address + ((pfn << PAGE_SHIFT) & ~PMD_MASK); 
+
+	adr = early_ioremap(pfn * PAGE_SIZE, PAGE_SIZE);
 	memset(adr, 0, PAGE_SIZE);
-	*index = i; 
-	*phys  = pfn * PAGE_SIZE;  
-	return adr; 
-} 
+	*phys  = pfn * PAGE_SIZE;
+	return adr;
+}
 
-static __meminit void unmap_low_page(int i)
+static __meminit void unmap_low_page(void *adr)
 { 
-	struct temp_map *ti;
 
 	if (after_bootmem)
 		return;
 
-	ti = &temp_mappings[i];
-	set_pmd(ti->pmd, __pmd(0));
-	ti->allocated = 0; 
+	early_iounmap(adr, PAGE_SIZE);
 } 
 
 /* Must run before zap_low_mappings */
 __init void *early_ioremap(unsigned long addr, unsigned long size)
 {
-	unsigned long map = round_down(addr, LARGE_PAGE_SIZE); 
-
-	/* actually usually some more */
-	if (size >= LARGE_PAGE_SIZE) { 
-		return NULL;
+	unsigned long vaddr;
+	pmd_t *pmd, *last_pmd;
+	int i, pmds;
+
+	pmds = ((addr & ~PMD_MASK) + size + ~PMD_MASK) / PMD_SIZE;
+	vaddr = __START_KERNEL_map;
+	pmd = level2_kernel_pgt;
+	last_pmd = level2_kernel_pgt + PTRS_PER_PMD - 1;
+	for (; pmd <= last_pmd; pmd++, vaddr += PMD_SIZE) {
+		for (i = 0; i < pmds; i++) {
+			if (pmd_present(pmd[i]))
+				goto next;
+		}
+		vaddr += addr & ~PMD_MASK;
+		addr &= PMD_MASK;
+		for (i = 0; i < pmds; i++, addr += PMD_SIZE)
+			set_pmd(pmd + i,__pmd(addr | _KERNPG_TABLE | _PAGE_PSE));
+		__flush_tlb();
+		return (void *)vaddr;
+	next:
+		;
 	}
-	set_pmd(temp_mappings[0].pmd,  __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
-	map += LARGE_PAGE_SIZE;
-	set_pmd(temp_mappings[1].pmd,  __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
-	__flush_tlb();
-	return temp_mappings[0].address + (addr & (LARGE_PAGE_SIZE-1));
+	printk("early_ioremap(0x%lx, %lu) failed\n", addr, size);
+	return NULL;
 }
 
 /* To avoid virtual aliases later */
 __init void early_iounmap(void *addr, unsigned long size)
 {
-	if ((void *)round_down((unsigned long)addr, LARGE_PAGE_SIZE) != temp_mappings[0].address)
-		printk("early_iounmap: bad address %p\n", addr);
-	set_pmd(temp_mappings[0].pmd, __pmd(0));
-	set_pmd(temp_mappings[1].pmd, __pmd(0));
+	unsigned long vaddr;
+	pmd_t *pmd;
+	int i, pmds;
+
+	vaddr = (unsigned long)addr;
+	pmds = ((vaddr & ~PMD_MASK) + size + ~PMD_MASK) / PMD_SIZE;
+	pmd = level2_kernel_pgt + pmd_index(vaddr);
+	for (i = 0; i < pmds; i++)
+		pmd_clear(pmd + i);
 	__flush_tlb();
 }
 
@@ -289,7 +288,6 @@ static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigne
 
 
 	for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE ) {
-		int map; 
 		unsigned long pmd_phys;
 		pud_t *pud = pud_page + pud_index(addr);
 		pmd_t *pmd;
@@ -307,12 +305,12 @@ static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigne
 			continue;
 		}
 
-		pmd = alloc_low_page(&map, &pmd_phys);
+		pmd = alloc_low_page(&pmd_phys);
 		spin_lock(&init_mm.page_table_lock);
 		set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
 		phys_pmd_init(pmd, addr, end);
 		spin_unlock(&init_mm.page_table_lock);
-		unmap_low_page(map);
+		unmap_low_page(pmd);
 	}
 	__flush_tlb();
 } 
@@ -364,7 +362,6 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end)
 	end = (unsigned long)__va(end);
 
 	for (; start < end; start = next) {
-		int map;
 		unsigned long pud_phys; 
 		pgd_t *pgd = pgd_offset_k(start);
 		pud_t *pud;
@@ -372,7 +369,7 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end)
 		if (after_bootmem)
 			pud = pud_offset(pgd, start & PGDIR_MASK);
 		else
-			pud = alloc_low_page(&map, &pud_phys);
+			pud = alloc_low_page(&pud_phys);
 
 		next = start + PGDIR_SIZE;
 		if (next > end) 
@@ -380,7 +377,7 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end)
 		phys_pud_init(pud, __pa(start), __pa(next));
 		if (!after_bootmem)
 			set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
-		unmap_low_page(map);   
+		unmap_low_page(pud);
 	} 
 
 	if (!after_bootmem)
@@ -388,21 +385,6 @@ void __meminit init_memory_mapping(unsigned long start, unsigned long end)
 	__flush_tlb_all();
 }
 
-void __cpuinit zap_low_mappings(int cpu)
-{
-	if (cpu == 0) {
-		pgd_t *pgd = pgd_offset_k(0UL);
-		pgd_clear(pgd);
-	} else {
-		/*
-		 * For AP's, zap the low identity mappings by changing the cr3
-		 * to init_level4_pgt and doing local flush tlb all
-		 */
-		asm volatile("movq %0,%%cr3" :: "r" (__pa_symbol(&init_level4_pgt)));
-	}
-	__flush_tlb_all();
-}
-
 #ifndef CONFIG_NUMA
 void __init paging_init(void)
 {
@@ -579,15 +561,6 @@ void __init mem_init(void)
 		reservedpages << (PAGE_SHIFT-10),
 		datasize >> 10,
 		initsize >> 10);
-
-#ifdef CONFIG_SMP
-	/*
-	 * Sync boot_level4_pgt mappings with the init_level4_pgt
-	 * except for the low identity mappings which are already zapped
-	 * in init_level4_pgt. This sync-up is essential for AP's bringup
-	 */
-	memcpy(boot_level4_pgt+1, init_level4_pgt+1, (PTRS_PER_PGD-1)*sizeof(pgd_t));
-#endif
 }
 
 void free_init_pages(char *what, unsigned long begin, unsigned long end)
@@ -597,21 +570,23 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	if (begin >= end)
 		return;
 
-	printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
 	for (addr = begin; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
 		memset((void *)(addr & ~(PAGE_SIZE-1)),
 			POISON_FREE_INITMEM, PAGE_SIZE);
+		if (addr >= __START_KERNEL_map)
+			change_page_attr_addr(addr, 1, __pgprot(0));
 		free_page(addr);
 		totalram_pages++;
 	}
+	if (addr > __START_KERNEL_map)
+		global_flush_tlb();
 }
 
 void free_initmem(void)
 {
-	memset(__initdata_begin, POISON_FREE_INITDATA,
-		__initdata_end - __initdata_begin);
 	free_init_pages("unused kernel memory",
 			(unsigned long)(&__init_begin),
 			(unsigned long)(&__init_end));
@@ -621,13 +596,23 @@ void free_initmem(void)
 
 void mark_rodata_ro(void)
 {
-	unsigned long addr = (unsigned long)__start_rodata;
+	unsigned long start = (unsigned long)_stext, end;
+
+#ifdef CONFIG_HOTPLUG_CPU
+	/* It must still be possible to apply SMP alternatives. */
+	if (num_possible_cpus() > 1)
+		start = (unsigned long)_etext;
+#endif
+	end = (unsigned long)__end_rodata;
+	start = (start + PAGE_SIZE - 1) & PAGE_MASK;
+	end &= PAGE_MASK;
+	if (end <= start)
+		return;
 
-	for (; addr < (unsigned long)__end_rodata; addr += PAGE_SIZE)
-		change_page_attr_addr(addr, 1, PAGE_KERNEL_RO);
+	change_page_attr_addr(start, (end - start) >> PAGE_SHIFT, PAGE_KERNEL_RO);
 
-	printk ("Write protecting the kernel read-only data: %luk\n",
-			(__end_rodata - __start_rodata) >> 10);
+	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
+	       (end - start) >> 10);
 
 	/*
 	 * change_page_attr_addr() requires a global_flush_tlb() call after it.
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index c6e5e8d401a..6cac90aa503 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -13,12 +13,21 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/io.h>
+
 #include <asm/pgalloc.h>
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 #include <asm/proto.h>
 
+unsigned long __phys_addr(unsigned long x)
+{
+	if (x >= __START_KERNEL_map)
+		return x - __START_KERNEL_map + phys_base;
+	return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+
 #define ISA_START_ADDRESS      0xa0000
 #define ISA_END_ADDRESS                0x100000
 
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c
index b5b8dba28b4..f983c75825d 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86_64/mm/k8topology.c
@@ -49,11 +49,8 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	int found = 0;
 	u32 reg;
 	unsigned numnodes;
-	nodemask_t nodes_parsed;
 	unsigned dualcore = 0;
 
-	nodes_clear(nodes_parsed);
-
 	if (!early_pci_allowed())
 		return -1;
 
@@ -65,6 +62,8 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 
 	reg = read_pci_config(0, nb, 0, 0x60); 
 	numnodes = ((reg >> 4) & 0xF) + 1;
+	if (numnodes <= 1)
+		return -1;
 
 	printk(KERN_INFO "Number of nodes %d\n", numnodes);
 
@@ -102,7 +101,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 			       nodeid, (base>>8)&3, (limit>>8) & 3); 
 			return -1; 
 		}	
-		if (node_isset(nodeid, nodes_parsed)) { 
+		if (node_isset(nodeid, node_possible_map)) {
 			printk(KERN_INFO "Node %d already present. Skipping\n", 
 			       nodeid);
 			continue;
@@ -155,7 +154,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 
 		prevbase = base;
 
-		node_set(nodeid, nodes_parsed);
+		node_set(nodeid, node_possible_map);
 	} 
 
 	if (!found)
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index 41b8fb06992..51548947ad3 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -273,125 +273,213 @@ void __init numa_init_array(void)
 
 #ifdef CONFIG_NUMA_EMU
 /* Numa emulation */
-int numa_fake __initdata = 0;
+#define E820_ADDR_HOLE_SIZE(start, end)					\
+	(e820_hole_size((start) >> PAGE_SHIFT, (end) >> PAGE_SHIFT) <<	\
+	PAGE_SHIFT)
+char *cmdline __initdata;
 
 /*
- * This function is used to find out if the start and end correspond to
- * different zones.
+ * Setups up nid to range from addr to addr + size.  If the end boundary is
+ * greater than max_addr, then max_addr is used instead.  The return value is 0
+ * if there is additional memory left for allocation past addr and -1 otherwise.
+ * addr is adjusted to be at the end of the node.
  */
-int zone_cross_over(unsigned long start, unsigned long end)
+static int __init setup_node_range(int nid, struct bootnode *nodes, u64 *addr,
+				   u64 size, u64 max_addr)
 {
-	if ((start < (MAX_DMA32_PFN << PAGE_SHIFT)) &&
-			(end >= (MAX_DMA32_PFN << PAGE_SHIFT)))
-		return 1;
-	return 0;
+	int ret = 0;
+	nodes[nid].start = *addr;
+	*addr += size;
+	if (*addr >= max_addr) {
+		*addr = max_addr;
+		ret = -1;
+	}
+	nodes[nid].end = *addr;
+	node_set(nid, node_possible_map);
+	printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", nid,
+	       nodes[nid].start, nodes[nid].end,
+	       (nodes[nid].end - nodes[nid].start) >> 20);
+	return ret;
 }
 
-static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
+/*
+ * Splits num_nodes nodes up equally starting at node_start.  The return value
+ * is the number of nodes split up and addr is adjusted to be at the end of the
+ * last node allocated.
+ */
+static int __init split_nodes_equally(struct bootnode *nodes, u64 *addr,
+				      u64 max_addr, int node_start,
+				      int num_nodes)
 {
- 	int i, big;
- 	struct bootnode nodes[MAX_NUMNODES];
- 	unsigned long sz, old_sz;
-	unsigned long hole_size;
-	unsigned long start, end;
-	unsigned long max_addr = (end_pfn << PAGE_SHIFT);
-
-	start = (start_pfn << PAGE_SHIFT);
-	hole_size = e820_hole_size(start, max_addr);
-	sz = (max_addr - start - hole_size) / numa_fake;
-
- 	/* Kludge needed for the hash function */
-
-	old_sz = sz;
-	/*
-	 * Round down to the nearest FAKE_NODE_MIN_SIZE.
-	 */
-	sz &= FAKE_NODE_MIN_HASH_MASK;
+	unsigned int big;
+	u64 size;
+	int i;
 
+	if (num_nodes <= 0)
+		return -1;
+	if (num_nodes > MAX_NUMNODES)
+		num_nodes = MAX_NUMNODES;
+	size = (max_addr - *addr - E820_ADDR_HOLE_SIZE(*addr, max_addr)) /
+	       num_nodes;
 	/*
-	 * We ensure that each node is at least 64MB big.  Smaller than this
-	 * size can cause VM hiccups.
+	 * Calculate the number of big nodes that can be allocated as a result
+	 * of consolidating the leftovers.
 	 */
-	if (sz == 0) {
-		printk(KERN_INFO "Not enough memory for %d nodes.  Reducing "
-				"the number of nodes\n", numa_fake);
-		numa_fake = (max_addr - start - hole_size) / FAKE_NODE_MIN_SIZE;
-		printk(KERN_INFO "Number of fake nodes will be = %d\n",
-				numa_fake);
-		sz = FAKE_NODE_MIN_SIZE;
+	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) * num_nodes) /
+	      FAKE_NODE_MIN_SIZE;
+
+	/* Round down to nearest FAKE_NODE_MIN_SIZE. */
+	size &= FAKE_NODE_MIN_HASH_MASK;
+	if (!size) {
+		printk(KERN_ERR "Not enough memory for each node.  "
+		       "NUMA emulation disabled.\n");
+		return -1;
 	}
-	/*
-	 * Find out how many nodes can get an extra NODE_MIN_SIZE granule.
-	 * This logic ensures the extra memory gets distributed among as many
-	 * nodes as possible (as compared to one single node getting all that
-	 * extra memory.
-	 */
-	big = ((old_sz - sz) * numa_fake) / FAKE_NODE_MIN_SIZE;
-	printk(KERN_INFO "Fake node Size: %luMB hole_size: %luMB big nodes: "
-			"%d\n",
-			(sz >> 20), (hole_size >> 20), big);
- 	memset(&nodes,0,sizeof(nodes));
-	end = start;
- 	for (i = 0; i < numa_fake; i++) {
-		/*
-		 * In case we are not able to allocate enough memory for all
-		 * the nodes, we reduce the number of fake nodes.
-		 */
-		if (end >= max_addr) {
-			numa_fake = i - 1;
-			break;
-		}
- 		start = nodes[i].start = end;
-		/*
-		 * Final node can have all the remaining memory.
-		 */
- 		if (i == numa_fake-1)
- 			sz = max_addr - start;
- 		end = nodes[i].start + sz;
-		/*
-		 * Fir "big" number of nodes get extra granule.
-		 */
+
+	for (i = node_start; i < num_nodes + node_start; i++) {
+		u64 end = *addr + size;
 		if (i < big)
 			end += FAKE_NODE_MIN_SIZE;
 		/*
-		 * Iterate over the range to ensure that this node gets at
-		 * least sz amount of RAM (excluding holes)
+		 * The final node can have the remaining system RAM.  Other
+		 * nodes receive roughly the same amount of available pages.
 		 */
-		while ((end - start - e820_hole_size(start, end)) < sz) {
-			end += FAKE_NODE_MIN_SIZE;
-			if (end >= max_addr)
-				break;
+		if (i == num_nodes + node_start - 1)
+			end = max_addr;
+		else
+			while (end - *addr - E820_ADDR_HOLE_SIZE(*addr, end) <
+			       size) {
+				end += FAKE_NODE_MIN_SIZE;
+				if (end > max_addr) {
+					end = max_addr;
+					break;
+				}
+			}
+		if (setup_node_range(i, nodes, addr, end - *addr, max_addr) < 0)
+			break;
+	}
+	return i - node_start + 1;
+}
+
+/*
+ * Splits the remaining system RAM into chunks of size.  The remaining memory is
+ * always assigned to a final node and can be asymmetric.  Returns the number of
+ * nodes split.
+ */
+static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
+				      u64 max_addr, int node_start, u64 size)
+{
+	int i = node_start;
+	size = (size << 20) & FAKE_NODE_MIN_HASH_MASK;
+	while (!setup_node_range(i++, nodes, addr, size, max_addr))
+		;
+	return i - node_start;
+}
+
+/*
+ * Sets up the system RAM area from start_pfn to end_pfn according to the
+ * numa=fake command-line option.
+ */
+static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
+{
+	struct bootnode nodes[MAX_NUMNODES];
+	u64 addr = start_pfn << PAGE_SHIFT;
+	u64 max_addr = end_pfn << PAGE_SHIFT;
+	int num_nodes = 0;
+	int coeff_flag;
+	int coeff = -1;
+	int num = 0;
+	u64 size;
+	int i;
+
+	memset(&nodes, 0, sizeof(nodes));
+	/*
+	 * If the numa=fake command-line is just a single number N, split the
+	 * system RAM into N fake nodes.
+	 */
+	if (!strchr(cmdline, '*') && !strchr(cmdline, ',')) {
+		num_nodes = split_nodes_equally(nodes, &addr, max_addr, 0,
+						simple_strtol(cmdline, NULL, 0));
+		if (num_nodes < 0)
+			return num_nodes;
+		goto out;
+	}
+
+	/* Parse the command line. */
+	for (coeff_flag = 0; ; cmdline++) {
+		if (*cmdline && isdigit(*cmdline)) {
+			num = num * 10 + *cmdline - '0';
+			continue;
 		}
-		/*
-		 * Look at the next node to make sure there is some real memory
-		 * to map.  Bad things happen when the only memory present
-		 * in a zone on a fake node is IO hole.
-		 */
-		while (e820_hole_size(end, end + FAKE_NODE_MIN_SIZE) > 0) {
-			if (zone_cross_over(start, end + sz)) {
-				end = (MAX_DMA32_PFN << PAGE_SHIFT);
+		if (*cmdline == '*') {
+			if (num > 0)
+				coeff = num;
+			coeff_flag = 1;
+		}
+		if (!*cmdline || *cmdline == ',') {
+			if (!coeff_flag)
+				coeff = 1;
+			/*
+			 * Round down to the nearest FAKE_NODE_MIN_SIZE.
+			 * Command-line coefficients are in megabytes.
+			 */
+			size = ((u64)num << 20) & FAKE_NODE_MIN_HASH_MASK;
+			if (size)
+				for (i = 0; i < coeff; i++, num_nodes++)
+					if (setup_node_range(num_nodes, nodes,
+						&addr, size, max_addr) < 0)
+						goto done;
+			if (!*cmdline)
 				break;
-			}
-			if (end >= max_addr)
+			coeff_flag = 0;
+			coeff = -1;
+		}
+		num = 0;
+	}
+done:
+	if (!num_nodes)
+		return -1;
+	/* Fill remainder of system RAM, if appropriate. */
+	if (addr < max_addr) {
+		if (coeff_flag && coeff < 0) {
+			/* Split remaining nodes into num-sized chunks */
+			num_nodes += split_nodes_by_size(nodes, &addr, max_addr,
+							 num_nodes, num);
+			goto out;
+		}
+		switch (*(cmdline - 1)) {
+		case '*':
+			/* Split remaining nodes into coeff chunks */
+			if (coeff <= 0)
 				break;
-			end += FAKE_NODE_MIN_SIZE;
+			num_nodes += split_nodes_equally(nodes, &addr, max_addr,
+							 num_nodes, coeff);
+			break;
+		case ',':
+			/* Do not allocate remaining system RAM */
+			break;
+		default:
+			/* Give one final node */
+			setup_node_range(num_nodes, nodes, &addr,
+					 max_addr - addr, max_addr);
+			num_nodes++;
 		}
-		if (end > max_addr)
-			end = max_addr;
-		nodes[i].end = end;
- 		printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n",
- 		       i,
- 		       nodes[i].start, nodes[i].end,
- 		       (nodes[i].end - nodes[i].start) >> 20);
-		node_set_online(i);
- 	}
- 	memnode_shift = compute_hash_shift(nodes, numa_fake);
- 	if (memnode_shift < 0) {
- 		memnode_shift = 0;
- 		printk(KERN_ERR "No NUMA hash function found. Emulation disabled.\n");
- 		return -1;
- 	}
- 	for_each_online_node(i) {
+	}
+out:
+	memnode_shift = compute_hash_shift(nodes, num_nodes);
+	if (memnode_shift < 0) {
+		memnode_shift = 0;
+		printk(KERN_ERR "No NUMA hash function found.  NUMA emulation "
+		       "disabled.\n");
+		return -1;
+	}
+
+	/*
+	 * We need to vacate all active ranges that may have been registered by
+	 * SRAT.
+	 */
+	remove_all_active_ranges();
+	for_each_node_mask(i, node_possible_map) {
 		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
  		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
@@ -399,26 +487,32 @@ static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
  	numa_init_array();
  	return 0;
 }
-#endif
+#undef E820_ADDR_HOLE_SIZE
+#endif /* CONFIG_NUMA_EMU */
 
 void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 { 
 	int i;
 
+	nodes_clear(node_possible_map);
+
 #ifdef CONFIG_NUMA_EMU
-	if (numa_fake && !numa_emulation(start_pfn, end_pfn))
+	if (cmdline && !numa_emulation(start_pfn, end_pfn))
  		return;
+	nodes_clear(node_possible_map);
 #endif
 
 #ifdef CONFIG_ACPI_NUMA
 	if (!numa_off && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
 					  end_pfn << PAGE_SHIFT))
  		return;
+	nodes_clear(node_possible_map);
 #endif
 
 #ifdef CONFIG_K8_NUMA
 	if (!numa_off && !k8_scan_nodes(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT))
 		return;
+	nodes_clear(node_possible_map);
 #endif
 	printk(KERN_INFO "%s\n",
 	       numa_off ? "NUMA turned off" : "No NUMA configuration found");
@@ -432,6 +526,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
 	memnodemap[0] = 0;
 	nodes_clear(node_online_map);
 	node_set_online(0);
+	node_set(0, node_possible_map);
 	for (i = 0; i < NR_CPUS; i++)
 		numa_set_node(i, 0);
 	node_to_cpumask[0] = cpumask_of_cpu(0);
@@ -486,11 +581,8 @@ static __init int numa_setup(char *opt)
 	if (!strncmp(opt,"off",3))
 		numa_off = 1;
 #ifdef CONFIG_NUMA_EMU
-	if(!strncmp(opt, "fake=", 5)) {
-		numa_fake = simple_strtoul(opt+5,NULL,0); ;
-		if (numa_fake >= MAX_NUMNODES)
-			numa_fake = MAX_NUMNODES;
-	}
+	if (!strncmp(opt, "fake=", 5))
+		cmdline = opt + 5;
 #endif
 #ifdef CONFIG_ACPI_NUMA
  	if (!strncmp(opt,"noacpi",6))
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index 081409aa345..d653d0bf3df 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -180,16 +180,24 @@ __change_page_attr(unsigned long address, unsigned long pfn, pgprot_t prot,
  */
 int change_page_attr_addr(unsigned long address, int numpages, pgprot_t prot)
 {
-	int err = 0; 
+	int err = 0, kernel_map = 0;
 	int i; 
 
+	if (address >= __START_KERNEL_map
+	    && address < __START_KERNEL_map + KERNEL_TEXT_SIZE) {
+		address = (unsigned long)__va(__pa(address));
+		kernel_map = 1;
+	}
+
 	down_write(&init_mm.mmap_sem);
 	for (i = 0; i < numpages; i++, address += PAGE_SIZE) {
 		unsigned long pfn = __pa(address) >> PAGE_SHIFT;
 
-		err = __change_page_attr(address, pfn, prot, PAGE_KERNEL);
-		if (err) 
-			break; 
+		if (!kernel_map || pte_present(pfn_pte(0, prot))) {
+			err = __change_page_attr(address, pfn, prot, PAGE_KERNEL);
+			if (err)
+				break;
+		}
 		/* Handle kernel mapping too which aliases part of the
 		 * lowmem */
 		if (__pa(address) < KERNEL_TEXT_SIZE) {
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 2efe215fc76..1e76bb0a727 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -419,19 +419,21 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
+	node_possible_map = nodes_parsed;
+
 	/* Finally register nodes */
-	for_each_node_mask(i, nodes_parsed)
+	for_each_node_mask(i, node_possible_map)
 		setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 	/* Try again in case setup_node_bootmem missed one due
 	   to missing bootmem */
-	for_each_node_mask(i, nodes_parsed)
+	for_each_node_mask(i, node_possible_map)
 		if (!node_online(i))
 			setup_node_bootmem(i, nodes[i].start, nodes[i].end);
 
 	for (i = 0; i < NR_CPUS; i++) {
 		if (cpu_to_node[i] == NUMA_NO_NODE)
 			continue;
-		if (!node_isset(cpu_to_node[i], nodes_parsed))
+		if (!node_isset(cpu_to_node[i], node_possible_map))
 			numa_set_node(i, NUMA_NO_NODE);
 	}
 	numa_init_array();