[ACPI] delete CONFIG_ACPI_BOOT

it has been a synonym for CONFIG_ACPI since 2.6.12

Signed-off-by: Len Brown <len.brown@intel.com>

7 files changed, 13 insertions, 18 deletions

diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 660a03a89e6..40242c61e90 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -144,7 +144,6 @@ config X86_CPUID
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
-# disable it for opteron optimized builds because it pulls in ACPI_BOOT
 config X86_HT
 	bool
 	depends on SMP && !MK8
@@ -461,7 +460,6 @@ config PCI_DIRECT
 config PCI_MMCONFIG
 	bool "Support mmconfig PCI config space access"
 	depends on PCI && ACPI
-	select ACPI_BOOT
 
 config UNORDERED_IO
        bool "Unordered IO mapping access"
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 776f3c866b7..aed77c1c5cc 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -135,7 +135,6 @@ CONFIG_PM_STD_PARTITION=""
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 48f9e2c19cd..0296ca6cbfa 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -12,7 +12,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 obj-$(CONFIG_X86_MCE)         += mce.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
 obj-$(CONFIG_MTRR)		+= ../../i386/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI_BOOT)		+= acpi/
+obj-$(CONFIG_ACPI)		+= acpi/
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
diff --git a/arch/x86_64/kernel/acpi/Makefile b/arch/x86_64/kernel/acpi/Makefile
index d2c2ee5f9a8..7da9ace890b 100644
--- a/arch/x86_64/kernel/acpi/Makefile
+++ b/arch/x86_64/kernel/acpi/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_ACPI_BOOT)		:= boot.o
-boot-$(CONFIG_ACPI_BOOT)	:= ../../../i386/kernel/acpi/boot.o
+obj-y			:= boot.o
+boot-y			:= ../../../i386/kernel/acpi/boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index d206d7e49cf..1013a8fe44d 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1841,7 +1841,7 @@ device_initcall(ioapic_init_sysfs);
                           ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 
 #define IO_APIC_MAX_ID		0xFE
 
@@ -1923,7 +1923,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	return 0;
 }
 
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
 
 
 /*
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 79c362d03e2..86445f320d8 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -74,7 +74,7 @@ static unsigned int num_processors = 0;
 physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
 
 /* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 extern struct acpi_boot_flags acpi_boot;
 #ifdef CONFIG_X86_LOCAL_APIC
 extern int acpi_parse_lapic (acpi_table_entry_header *header);
@@ -84,7 +84,7 @@ extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header);
 #ifdef CONFIG_X86_IO_APIC
 extern int acpi_parse_ioapic (acpi_table_entry_header *header);
 #endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
 
 u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
 
@@ -519,8 +519,6 @@ void __init get_smp_config (void)
 	struct intel_mp_floating *mpf = mpf_found;
 
 	/*
- 	 * ACPI may be used to obtain the entire SMP configuration or just to 
- 	 * enumerate/configure processors (CONFIG_ACPI_BOOT).  Note that 
  	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
  	 * processors, where MPS only supports physical.
  	 */
@@ -673,7 +671,7 @@ void __init find_smp_config (void)
                             ACPI-based MP Configuration
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 
 void __init mp_register_lapic_address (
 	u64			address)
@@ -994,4 +992,4 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
 }
 
 #endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 116a491e296..cfcebc8ab7b 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -71,7 +71,7 @@ unsigned long mmu_cr4_features;
 
 int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
-#ifdef	CONFIG_ACPI_BOOT
+#ifdef	CONFIG_ACPI
 extern int __initdata acpi_ht;
 extern acpi_interrupt_flags	acpi_sci_flags;
 int __initdata acpi_force = 0;
@@ -294,7 +294,7 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 			maxcpus = simple_strtoul(from + 8, NULL, 0);
 		}
 #endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 		/* "acpi=off" disables both ACPI table parsing and interpreter init */
 		if (!memcmp(from, "acpi=off", 8))
 			disable_acpi();
@@ -566,7 +566,7 @@ void __init setup_arch(char **cmdline_p)
 
 	init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 	/*
 	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
 	 * Call this early for SRAT node setup.
@@ -658,7 +658,7 @@ void __init setup_arch(char **cmdline_p)
 
 	check_ioapic();
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 	/*
 	 * Read APIC and some other early information from ACPI tables.
 	 */