Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:
Device tree patches for ux500, basically trees and auxdata:
- Fix for the thermal node to be contained in the PRCMU node
- Add the DTS and auxdata needed to boot the U8540 platform
- Various regulators added and renamed
- Rename base SoC node
- A bunch of DMA patches adding channels for DT boots
- A bunch of crypto+hash patches adding config for DT boots
- A bunch of patches fixing the ALSA SoC support to work
- Register the LP5521 LEDs
- Fix a number of typos and naming errors

* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
  ARM: ux500: drop any 0x prefix from I2C DT devices
  ARM: ux500: Allocate correct amount of memory for the u8540 in DT
  ARM: ux500: Provide auxdata to ux500 ASoC driver
  ARM: ux500: Add DT regulators for ab8500-codec
  ARM: ux500: Correct anamic2 typo in DT files
  ARM: ux500: Fix trivial typo in v-anamic1 comment
  ARM: ux500: Reduce PRCMU reg-names to shorter form for u8540 DT
  ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up
  ARM: ux500: cut chip-select GPIOs from SSP device
  ARM: ux500: use symbolic names for interrupt flags
  ARM: ux500: use #include syntax to include *.dtsi.
  ARM: ux500: bump MMC/SD max frequency for DT boots
  ARM: ux500: Apply other compatible name to the u8540 DTS file
  pinctrl/nomadik: Standardise Pinctrl compat string for DBx5x based platforms
  ARM: ux500: Standardise Pinctrl compatible string for DBx5x based platforms
  ARM: ux500: Standardise DBx5x0 based Pinctrl compat string in the DTS
  crypto: ux500/hash - Enable DT probing of the driver
  crypto: ux500/cryp - Enable DT probing of the driver
  ARM: ux500: enable the crypto and hash on all dbx500
  ARM: ux500: Provide an AUXDATA entry for ux500-hash
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

10 files changed, 340 insertions, 157 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c7bb1313e..4823c3121ee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -162,6 +162,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	hrefprev60.dtb \
 	hrefv60plus.dtb \
+	ccu8540.dtb \
 	ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
new file mode 100644
index 00000000000..48ff03441f5
--- /dev/null
+++ b/arch/arm/boot/dts/ccu8540.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson U8540 platform with Device Tree";
+	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+	memory@0 {
+		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+	};
+
+	soc {
+		prcmu@80157000 {
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+		};
+
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
index 04305463f00..ed29ec7288e 100644
--- a/arch/arm/boot/dts/ccu9540.dts
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
 
 / {
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
@@ -20,7 +20,7 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
-	soc-u9500 {
+	soc {
 		uart@80120000 {
 			status = "okay";
 		};
@@ -52,7 +52,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b6bc4ff17f2..a082f0ba1dd 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -9,10 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
 
 / {
-	soc-u9500 {
+	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "stericsson,db8500";
@@ -31,33 +32,33 @@
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -70,7 +71,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -83,7 +84,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
+			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -96,7 +97,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
+			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -109,7 +110,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -122,7 +123,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
+			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -135,7 +136,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -148,7 +149,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -161,7 +162,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -171,29 +172,61 @@
 		};
 
 		pinctrl {
-			compatible = "stericsson,nmk-pinctrl";
+			compatible = "stericsson,db8500-pinctrl";
 			prcm = <&prcmu>;
 		};
 
-		usb@a03e0000 {
+		usb_per5@a03e0000 {
 			compatible = "stericsson,db8500-musb",
 				"mentor,musb";
 			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
-		};
-
-		dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40",
-					"stericsson,dma40";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+
+			dr_mode = "otg";
+
+			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+			       <&dma 38 0 0x0>, /* Logical - MemToDev */
+			       <&dma 37 0 0x2>, /* Logical - DevToMem */
+			       <&dma 37 0 0x0>, /* Logical - MemToDev */
+			       <&dma 36 0 0x2>, /* Logical - DevToMem */
+			       <&dma 36 0 0x0>, /* Logical - MemToDev */
+			       <&dma 19 0 0x2>, /* Logical - DevToMem */
+			       <&dma 19 0 0x0>, /* Logical - MemToDev */
+			       <&dma 18 0 0x2>, /* Logical - DevToMem */
+			       <&dma 18 0 0x0>, /* Logical - MemToDev */
+			       <&dma 17 0 0x2>, /* Logical - DevToMem */
+			       <&dma 17 0 0x0>, /* Logical - MemToDev */
+			       <&dma 16 0 0x2>, /* Logical - DevToMem */
+			       <&dma 16 0 0x0>, /* Logical - MemToDev */
+			       <&dma 39 0 0x2>, /* Logical - DevToMem */
+			       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+			dma-names = "iep_1_9",  "oep_1_9",
+				    "iep_2_10", "oep_2_10",
+				    "iep_3_11", "oep_3_11",
+				    "iep_4_12", "oep_4_12",
+				    "iep_5_13", "oep_5_13",
+				    "iep_6_14", "oep_6_14",
+				    "iep_7_15", "oep_7_15",
+				    "iep_8",    "oep_8";
+		};
+
+		dma: dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
 			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			interrupts = <0 25 0x4>;
+			reg-names = "base", "lcpa";
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <3>;
+			memcpy-channels = <56 57 58 59 60>;
 		};
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 0x4>;
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
@@ -208,7 +241,8 @@
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
-				interrupts = <21 0x4>, <22 0x4>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
 				status = "disabled";
 			 };
@@ -322,21 +356,21 @@
 			ab8500 {
 				compatible = "stericsson,ab8500";
 				interrupt-parent = <&intc>;
-				interrupts = <0 40 0x4>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 0x4
-					              18 0x4>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 0x4
-						      39 0x4>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 				};
@@ -369,13 +403,13 @@
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 0x4
-						       96 0x4
-						       14 0x4
-						       15 0x4
-						       79 0x4
-						       74 0x4
-						       75 0x4>;
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -383,15 +417,15 @@
 							  "USB_LINK_STATUS",
 							  "USB_ADP_PROBE_PLUG",
 							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
 					v-ape-supply = <&db8500_vape_reg>;
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 				};
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 0x4
-						      7 0x4>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
@@ -410,6 +444,11 @@
 				codec: ab8500-codec {
 					compatible = "stericsson,ab8500-codec";
 
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -441,8 +480,8 @@
 					};
 
 					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
-						regulator-compatible = "ab8500_ldo_initcore";
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-compatible = "ab8500_ldo_intcore";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
@@ -460,14 +499,14 @@
 						regulator-compatible = "ab8500_ldo_audio";
 					};
 
-					// supply for v-anamic1 VAMic1-LDO
+					// supply for v-anamic1 VAMIC1 LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 						regulator-compatible = "ab8500_ldo_anamic1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
-						regulator-compatible = "ab8500_ldo_amamic2";
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-compatible = "ab8500_ldo_anamic2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
@@ -486,7 +525,7 @@
 		i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -499,7 +538,7 @@
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
+			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -512,7 +551,7 @@
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
+			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -525,7 +564,7 @@
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -538,7 +577,7 @@
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -551,82 +590,114 @@
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 0x4>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
-				    &gpio6 22 0x4 &gpio7 0 0x4>;
-
 		};
 
 		uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+			       <&dma 13 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+			       <&dma 12 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
+			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+			       <&dma 11 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+			       <&dma 29 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+			       <&dma 32 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
+			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+			       <&dma 28 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+			       <&dma 42 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 0x4>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 0x4>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -634,7 +705,7 @@
 		msp1: msp@80124000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -643,7 +714,7 @@
 		msp2: msp@80117000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 0x4>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -651,7 +722,7 @@
 		msp3: msp@80125000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -686,5 +757,20 @@
 
 			status = "disabled";
 		};
+
+		cryp@a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+		};
+
+		hash@a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index c0bc426952e..9db41b9d835 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "dbx5x0.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dbx5x0.dtsi"
 
 / {
 	memory {
@@ -27,7 +28,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		uart@80120000 {
 			status = "okay";
 		};
@@ -45,14 +46,14 @@
 				compatible = "tc3589x";
 				reg = <0x42>;
 				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
 
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				tc3589x_gpio: tc3589x_gpio {
 					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -63,17 +64,43 @@
 		};
 
 		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
+			lp5521@33 {
+				compatible = "national,lp5521";
 				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
-			lp5521@0x34 {
-				compatible = "lp5521";
+			lp5521@34 {
+				compatible = "national,lp5521";
 				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
-			bh1780@0x29 {
+			bh1780@29 {
 				compatible = "rohm,bh1780gli";
 				reg = <0x33>;
 			};
@@ -82,7 +109,7 @@
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
@@ -97,7 +124,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
@@ -106,7 +133,7 @@
 		// PoP:ed eMMC
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 
@@ -116,7 +143,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -236,7 +263,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -256,7 +283,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};
 
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
index c2d27481592..c6bb07df2d1 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -10,9 +10,9 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
@@ -24,7 +24,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		prcmu@80157000 {
 			ab8500@5 {
 				ab8500-gpio {
@@ -41,7 +41,7 @@
 		};
 
 		i2c@80110000 {
-			bu21013_tp@0x5c {
+			bu21013_tp@5c {
 				reset-gpio = <&tc3589x_gpio 13 0x4>;
 			};
 		};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2b587a74b81..3d580d6447f 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -10,9 +10,9 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
@@ -24,7 +24,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		i2c@80110000 {
 			bu21013_tp@0x5c {
 				reset-gpio = <&gpio4 15 0x4>;
@@ -34,7 +34,7 @@
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
@@ -48,7 +48,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
@@ -57,7 +57,7 @@
 		// PoP:ed eMMC
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 
@@ -67,7 +67,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -172,7 +172,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -192,7 +192,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};
 
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index db5db24fd54..fb9dce529da 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -82,7 +82,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 
 		sound {
 			compatible = "stericsson,snd-soc-mop500";
@@ -99,40 +99,13 @@
 			status = "okay";
 		};
 
-		prcmu@80157000 {
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			 };
-		};
-
 		external-bus@50000000 {
 			status = "okay";
 
 			ethernet@0 {
 				compatible = "smsc,lan9115";
 				reg = <0 0x10000>;
-				interrupts = <12 0x1>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
 				interrupt-parent = <&gpio4>;
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;
@@ -146,13 +119,21 @@
 			};
 		};
 
+		vmmci: regulator-gpio {
+			gpios = <&gpio6 25 0x4>;
+			enable-gpio = <&gpio7 4 0x4>;
+
+			status = "okay";
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
 
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
@@ -163,7 +144,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -197,15 +178,15 @@
 		};
 
 		i2c@80128000 {
-			lp5521@0x33 {
+			lp5521@33 {
 				// compatible = "lp5521";
 				reg = <0x33>;
 			};
-			lp5521@0x34 {
+			lp5521@34 {
 				// compatible = "lp5521";
 				reg = <0x34>;
 			};
-			bh1780@0x29 {
+			bh1780@29 {
 				// compatible = "rohm,bh1780gli";
 				reg = <0x33>;
 			};
@@ -298,6 +279,31 @@
 				};
 			};
 
+			thermal@801573c0 {
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
+
+				status = "okay";
+			};
+
 			ab8500 {
 				ab8500-gpio {
 					compatible = "stericsson,ab8500-gpio";
@@ -316,7 +322,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -336,7 +342,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};
 
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 615392a7567..524e33240ad 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -9,13 +9,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
+
 / {
-	soc-u9500 {
+	soc {
 		i2c@80004000 {
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x2>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;
 
@@ -52,26 +54,26 @@
 		};
 
 		i2c@80110000 {
-			bu21013_tp@0x5c {
-				compatible = "rhom,bu21013_tp";
+			bu21013_tp@5c {
+				compatible = "rohm,bu21013_tp";
 				reg = <0x5c>;
 				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
-				rhom,touch-max-x = <384>;
-				rhom,touch-max-y = <704>;
-				rhom,flip-y;
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
 			};
 
-			bu21013_tp@0x5d {
-				compatible = "rhom,bu21013_tp";
+			bu21013_tp@5d {
+				compatible = "rohm,bu21013_tp";
 				reg = <0x5d>;
 				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
-				rhom,touch-max-x = <384>;
-				rhom,touch-max-y = <704>;
-				rhom,flip-y;
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
 			};
 		};
 	};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 46cca52890b..7669a49fb6f 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -274,11 +274,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+	OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
 	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
+	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
+			NULL),
 	/* Requires device name bindings. */
-	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
+	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
 	/* Requires clock name and DMA bindings. */
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
@@ -292,6 +297,16 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	{},
 };
 
+static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
+	/* Requires DMA bindings. */
+	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+			&db8500_prcmu_pdata),
+	{},
+};
+
 static const struct of_device_id u8500_local_bus_nodes[] = {
 	/* only create devices below soc node */
 	{ .compatible = "stericsson,db8500", },
@@ -318,8 +333,13 @@ static void __init u8500_init_machine(void)
 	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
 	parent = u8500_of_init_devices();
 
-	/* automatically probe child nodes of db8500 device */
-	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+	/* automatically probe child nodes of dbx5x0 devices */
+	if (of_machine_is_compatible("st-ericsson,u8540"))
+		of_platform_populate(NULL, u8500_local_bus_nodes,
+				     u8540_auxdata_lookup, parent);
+	else
+		of_platform_populate(NULL, u8500_local_bus_nodes,
+				     u8500_auxdata_lookup, parent);
 }
 
 static const char * stericsson_dt_platform_compat[] = {