Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

36 files changed, 1248 insertions, 400 deletions

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 1c0c2b02d87..64dc4176407 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -229,7 +229,7 @@ usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
-obj-y					+= usb-ehci.o
+obj-y					+= usb-host.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index d4e41ef86aa..7542ba59f2b 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 62645640f5e..deed2db32c5 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 126,
@@ -211,7 +211,7 @@ static void __init omap_sdp_init(void)
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 07d1b20b114..f603f3b04cb 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -44,7 +44,6 @@
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
-#define OMAP4SDP_MDM_PWR_EN_GPIO	157
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
@@ -251,16 +250,6 @@ static void __init omap_4430sdp_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.phy_reset	= false,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL,
-};
-
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_OTG,
@@ -272,6 +261,7 @@ static struct twl4030_usb_data omap4_usbphy_data = {
 	.phy_exit	= omap4430_phy_exit,
 	.phy_power	= omap4430_phy_power,
 	.phy_set_clock	= omap4430_phy_set_clk,
+	.phy_suspend	= omap4430_phy_suspend,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -576,14 +566,6 @@ static void __init omap_4430sdp_init(void)
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
-	/* Power on the ULPI PHY */
-	status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
-	if (status)
-		pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__);
-	else
-		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
-
-	usb_ehci_init(&ehci_pdata);
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 71acb5ab281..e3a194f6b13 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void)
 	omap_init_irq();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = GPIO_USB_NRESET,
@@ -103,7 +103,7 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 10d60b7743c..913538ad17d 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void)
 	usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 #else
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -502,7 +502,7 @@ static void __init am3517_evm_init(void)
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index dac14161066..9be7289cbb5 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
@@ -810,7 +810,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8f9a64d650e..8e18dc76b11 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
@@ -192,7 +192,7 @@ static int cm_t3517_init_usbh(void)
 		msleep(1);
 	}
 
-	usb_ehci_init(&cm_t3517_ehci_pdata);
+	usbhs_init(&cm_t3517_ehci_pdata);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 9a2a31e011c..bc0141b9869 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -803,7 +803,7 @@ static void __init devkit8000_init(void)
 	devkit8000_ads7846_init();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3be85a1f55f..f9f53441931 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
@@ -699,7 +699,7 @@ static void __init igep2_init(void)
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	igep2_flash_init();
 	igep2_leds_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 4dc62a9b9cb..579fc2d2525 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void)
 void __init igep3_wifi_bt_init(void) {}
 #endif
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -435,7 +435,7 @@ static void __init igep3_init(void)
 	platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	igep3_flash_init();
 	igep3_leds_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 46d814ab565..f0963b6e462 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void)
 	gpio_direction_output(170, true);
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 323c3809ce3..38a2d91790c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	/* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -700,7 +700,7 @@ static void __init omap3_evm_init(void)
 
 		/* setup EHCI phy reset config */
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		ehci_pdata.reset_gpio_port[1] = 21;
+		usbhs_bdata.reset_gpio_port[1] = 21;
 
 		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
 		musb_board_data.power = 500;
@@ -708,10 +708,10 @@ static void __init omap3_evm_init(void)
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		ehci_pdata.reset_gpio_port[1] = 135;
+		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 0b34beded11..aa05f2e46a6 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_vwlan_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 16,
@@ -716,7 +716,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 	gpmc_nand_init(&pandora_nand_data);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 2a2dad447e8..f6c87787cd4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	ads7846_dev_init();
 
 	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index db1f74fe6c4..84cfddb19a7 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void)
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	omap3touchbook_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e944025d5ef..ed61c1f5d5e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset  = false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void)
 	gpio_set_value(GPIO_HUB_NRESET, 0);
 	gpio_set_value(GPIO_HUB_NRESET, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
@@ -153,6 +153,7 @@ static struct twl4030_usb_data omap4_usbphy_data = {
 	.phy_exit	= omap4430_phy_exit,
 	.phy_power	= omap4430_phy_power,
 	.phy_set_clock	= omap4430_phy_set_clk,
+	.phy_suspend	= omap4430_phy_suspend,
 };
 
 static struct omap2_hsmmc_info mmc[] = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index cb26e5d8268..08770ccec0f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -454,7 +454,7 @@ static void __init overo_init(void)
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usbhs_init(&usbhs_bdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index e26754c24ee..1dd195afa39 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset		= true,
 	.reset_gpio_port[0]	= -EINVAL,
 	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
@@ -123,7 +123,7 @@ static void __init omap_zoom_init(void)
 	} else if (machine_is_omap_zoom3()) {
 		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-		usb_ehci_init(&ehci_pdata);
+		usbhs_init(&usbhs_bdata);
 	}
 
 	board_nand_init(zoom_nand_partitions,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 403a4a1d3f9..fbb1e30a73d 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
@@ -3322,7 +3322,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
@@ -3368,11 +3368,20 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("ehci-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs-omap.0",	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs-omap.0",	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index de9ec8ddd2a..46fd3f674ca 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3197,7 +3197,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK("usbhs-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3209,8 +3209,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK("ehci-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
+	CLK("usbhs-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
@@ -3219,8 +3219,8 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK("ehci-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK("ehci-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 745252c60e3..ebe33df708b 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -43,6 +43,7 @@
 
 static struct clk *phyclk, *clk48m, *clk32k;
 static void __iomem *ctrl_base;
+static int usbotghs_control;
 
 int omap4430_phy_init(struct device *dev)
 {
@@ -103,13 +104,6 @@ int omap4430_phy_set_clk(struct device *dev, int on)
 int omap4430_phy_power(struct device *dev, int ID, int on)
 {
 	if (on) {
-		/* enabled the clocks */
-		omap4430_phy_set_clk(dev, 1);
-		/* power on the phy */
-		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
-			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-			mdelay(200);
-		}
 		if (ID)
 			/* enable VBUS valid, IDDIG groung */
 			__raw_writel(AVALID | VBUSVALID, ctrl_base +
@@ -125,10 +119,31 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
 		/* Enable session END and IDIG to high impedence. */
 		__raw_writel(SESSEND | IDDIG, ctrl_base +
 					USBOTGHS_CONTROL);
+	}
+	return 0;
+}
+
+int omap4430_phy_suspend(struct device *dev, int suspend)
+{
+	if (suspend) {
 		/* Disable the clocks */
 		omap4430_phy_set_clk(dev, 0);
 		/* Power down the phy */
 		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+
+		/* save the context */
+		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
+	} else {
+		/* Enable the internel phy clcoks */
+		omap4430_phy_set_clk(dev, 1);
+		/* power on the phy */
+		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+			mdelay(200);
+		}
+
+		/* restore the context */
+		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-host.c
index 25eeadabc39..89ae29847c5 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -1,14 +1,15 @@
 /*
- * linux/arch/arm/mach-omap2/usb-ehci.c
+ * usb-host.c - OMAP USB Host
  *
  * This file will contain the board specific details for the
- * Synopsys EHCI host controller on OMAP3430
+ * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
  *
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2011 Texas Instruments
  * Author: Vikram Pandita <vikram.pandita@ti.com>
+ * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  *
  * Generalization by:
- * Felipe Balbi <felipe.balbi@nokia.com>
+ * Felipe Balbi <balbi@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,7 +20,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/clk.h>
+#include <linux/slab.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
@@ -30,44 +31,56 @@
 
 #include "mux.h"
 
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+#ifdef CONFIG_MFD_OMAP_USB_HOST
 
-static struct resource ehci_resources[] = {
+#define OMAP_USBHS_DEVICE	"usbhs-omap"
+
+static struct resource usbhs_resources[] = {
+	{
+		.name	= "uhh",
+		.flags	= IORESOURCE_MEM,
+	},
 	{
+		.name	= "tll",
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "ehci",
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "ehci-irq",
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "ohci",
 		.flags	= IORESOURCE_MEM,
 	},
-	{         /* general IRQ */
-		.flags   = IORESOURCE_IRQ,
+	{
+		.name	= "ohci-irq",
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
-static u64 ehci_dmamask = ~(u32)0;
-static struct platform_device ehci_device = {
-	.name           = "ehci-omap",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = &ehci_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
-		.platform_data          = NULL,
-	},
-	.num_resources  = ARRAY_SIZE(ehci_resources),
-	.resource       = ehci_resources,
+static struct platform_device usbhs_device = {
+	.name		= OMAP_USBHS_DEVICE,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
 };
 
+static struct usbhs_omap_platform_data		usbhs_data;
+static struct ehci_hcd_omap_platform_data	ehci_data;
+static struct ohci_hcd_omap_platform_data	ohci_data;
+
 /* MUX settings for EHCI pins */
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -81,7 +94,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
 		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb1_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb1_tll_clk",
@@ -107,14 +120,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -136,7 +149,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb2_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb2_tll_clk",
@@ -162,17 +175,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[2]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb3_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb3_tll_clk",
@@ -198,7 +211,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb3_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -207,10 +220,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb1_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb1_ulpiphy_clk",
@@ -236,7 +249,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb1_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb1_ulpitll_clk",
@@ -262,12 +275,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb2_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb2_ulpiphy_clk",
@@ -293,7 +306,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb2_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb2_ulpitll_clk",
@@ -319,90 +332,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 }
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
-{
-	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
-
-	/* Setup Pin IO MUX for EHCI */
-	if (cpu_is_omap34xx()) {
-		ehci_resources[0].start	= OMAP34XX_EHCI_BASE;
-		ehci_resources[0].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
-		ehci_resources[1].start	= OMAP34XX_UHH_CONFIG_BASE;
-		ehci_resources[1].end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		ehci_resources[2].start	= OMAP34XX_USBTLL_BASE;
-		ehci_resources[2].end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1;
-		ehci_resources[3].start = INT_34XX_EHCI_IRQ;
-		setup_ehci_io_mux(pdata->port_mode);
-	} else if (cpu_is_omap44xx()) {
-		ehci_resources[0].start	= OMAP44XX_HSUSB_EHCI_BASE;
-		ehci_resources[0].end	= OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
-		ehci_resources[1].start	= OMAP44XX_UHH_CONFIG_BASE;
-		ehci_resources[1].end	= OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1;
-		ehci_resources[2].start	= OMAP44XX_USBTLL_BASE;
-		ehci_resources[2].end	= OMAP44XX_USBTLL_BASE + SZ_4K - 1;
-		ehci_resources[3].start = OMAP44XX_IRQ_EHCI;
-		setup_4430ehci_io_mux(pdata->port_mode);
-	}
-
-	if (platform_device_register(&ehci_device) < 0) {
-		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
-		return;
-	}
-}
-
-#else
-
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
-
-{
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP34XX_OHCI_BASE,
-		.end	= OMAP34XX_OHCI_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP34XX_UHH_CONFIG_BASE,
-		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP34XX_USBTLL_BASE,
-		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* general IRQ */
-		.start	= INT_34XX_OHCI_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ohci_device = {
-	.name		= "ohci-omap3",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource	= ohci_resources,
-};
-
-static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -430,7 +366,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm1_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -461,7 +397,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm2_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -492,31 +428,147 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm3_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 }
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
-	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
+	switch (port_mode[0]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_mm_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
 
-	/* Setup Pin IO MUX for OHCI */
-	if (cpu_is_omap34xx())
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("usbb1_mm_txen",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("usbb1_mm_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_mm_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	default:
+		break;
+	}
+
+	switch (port_mode[1]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_mm_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("usbb2_mm_txen",
+			OMAP_PIN_INPUT_PULLDOWN);
+
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("usbb2_mm_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_mm_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+
+	case OMAP_USBHS_PORT_MODE_UNUSED:
+	default:
+		break;
+	}
+}
+
+void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+{
+	int	i;
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+		usbhs_data.port_mode[i] = pdata->port_mode[i];
+		ohci_data.port_mode[i] = pdata->port_mode[i];
+		ehci_data.port_mode[i] = pdata->port_mode[i];
+		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
+		ehci_data.regulator[i] = pdata->regulator[i];
+	}
+	ehci_data.phy_reset = pdata->phy_reset;
+	ohci_data.es2_compatibility = pdata->es2_compatibility;
+	usbhs_data.ehci_data = &ehci_data;
+	usbhs_data.ohci_data = &ohci_data;
+
+	if (cpu_is_omap34xx()) {
+		usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
+		usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
+		usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
+		usbhs_resources[2].start	= OMAP34XX_EHCI_BASE;
+		usbhs_resources[2].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
+		usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
+		usbhs_resources[4].start	= OMAP34XX_OHCI_BASE;
+		usbhs_resources[4].end	= OMAP34XX_OHCI_BASE + SZ_1K - 1;
+		usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
+		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
+	} else if (cpu_is_omap44xx()) {
+		usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
+		usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
+		usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
+		usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
+		usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
+		usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
+		usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
+		usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
+		usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
+		setup_4430ehci_io_mux(pdata->port_mode);
+		setup_4430ohci_io_mux(pdata->port_mode);
+	}
 
-	if (platform_device_register(&ohci_device) < 0) {
-		pr_err("Unable to register FS-USB (OHCI) device\n");
-		return;
+	if (platform_device_add_data(&usbhs_device,
+				&usbhs_data, sizeof(usbhs_data)) < 0) {
+		printk(KERN_ERR "USBHS platform_device_add_data failed\n");
+		goto init_end;
 	}
+
+	if (platform_device_register(&usbhs_device) < 0)
+		printk(KERN_ERR "USBHS platform_device_register failed\n");
+
+init_end:
+	return;
 }
 
 #else
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 }
 
-#endif /* CONFIG_USB_OHCI_HCD */
+#endif
+
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 5298949d4b1..241fc94b411 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -214,6 +214,10 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 
 	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+
+	if (cpu_is_omap44xx())
+		omap4430_phy_init(dev);
+
 }
 
 #else
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1a81fe12ccd..1e93f176c1d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -162,29 +162,10 @@ struct gpio_chip h1940_latch_gpiochip = {
 	.get			= h1940_gpiolib_latch_get,
 };
 
-static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
-
-	switch (cmd)
-	{
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(H1940_LATCH_USB_DP, 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(H1940_LATCH_USB_DP, 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-	.udc_command		= h1940_udc_pullup,
 	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
+	.pullup_pin		= H1940_LATCH_USB_DP,
 };
 
 static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
@@ -475,9 +456,6 @@ static void __init h1940_init(void)
 	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
 	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
 
-	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
-	gpio_direction_output(H1940_LATCH_USB_DP, 0);
-
 	gpio_request(H1940_LATCH_SD_POWER, "SD power");
 	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 271b9aa6d40..66f44440d5d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -84,26 +84,10 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
 	},
 };
 
-static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE :
-		gpio_set_value(S3C2410_GPB(3), 1);
-		break;
-	case S3C2410_UDC_P_DISABLE :
-		gpio_set_value(S3C2410_GPB(3), 0);
-		break;
-	case S3C2410_UDC_P_RESET :
-		break;
-	default:
-		break;
-	}
-}
-
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-	.udc_command		= n30_udc_pullup,
 	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
+	.pullup_pin		= S3C2410_GPB(3),
 };
 
 static struct gpio_keys_button n30_buttons[] = {
@@ -596,9 +580,6 @@ static void __init n30_init(void)
 
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
-
-	WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
-	gpio_direction_output(S3C2410_GPB(3), 0);
 }
 
 MACHINE_START(N30, "Acer-N30")
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 8e5758bdd66..834cfb61bcf 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -78,28 +78,9 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
 	}
 };
 
-static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
-
-	switch (cmd)
-	{
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPF(2), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPF(2), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 
 static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-	.udc_command		= smdk2413_udc_pullup,
+	.pullup_pin = S3C2410_GPF(2),
 };
 
 
@@ -133,9 +114,6 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull"));
-	gpio_direction_output(S3C2410_GPF(2), 0);
-
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9f2c14ec718..37405d9abe3 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -455,28 +455,10 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 };
 
 
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
-		/* FIXME: Do something here. */
-	}
-}
-
 /* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
 	.vbus_draw	= gta02_udc_vbus_draw,
-	.udc_command	= gta02_udc_command,
-
+	.pullup_pin = GTA02_GPIO_USB_PULLUP,
 };
 
 /* USB */
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c793b..d80f129bca9 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	pr_debug("udc: pullup(%d)\n", cmd);
-
-	switch (cmd) {
-		case S3C2410_UDC_P_ENABLE :
-			gpio_set_value(S3C2410_GPC(5), 1);
-			break;
-		case S3C2410_UDC_P_DISABLE :
-			gpio_set_value(S3C2410_GPC(5), 0);
-			break;
-		case S3C2410_UDC_P_RESET :
-			break;
-		default:
-			break;
-	}
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.udc_command		= mini2440_udc_pullup,
+	.pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -644,10 +626,6 @@ static void __init mini2440_init(void)
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
 	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-	/* Make sure the D+ pullup pin is output */
-	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-	gpio_direction_output(S3C2410_GPC(5), 0);
-
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
 		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index eab6ae50683..86bbc233b31 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -566,26 +566,10 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 	.sets = rx1950_nand_sets,
 };
 
-static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		gpio_direction_output(S3C2410_GPJ(5), 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		gpio_direction_output(S3C2410_GPJ(5), 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		break;
-	default:
-		break;
-	}
-}
-
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.udc_command = rx1950_udc_pullup,
 	.vbus_pin = S3C2410_GPG(5),
 	.vbus_pin_inverted = 1,
+	.pullup_pin = S3C2410_GPJ(5),
 };
 
 static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -750,9 +734,6 @@ static void __init rx1950_init_machine(void)
 						S3C2410_MISCCR_USBSUSPND0 |
 						S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-	WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
-	gpio_direction_output(S3C2410_GPJ(5), 0);
-
 	/* mmc power is disabled by default */
 	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
 	gpio_direction_output(S3C2410_GPJ(1), 0);
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b94e52df0d8..622a9ec1ff0 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 9bf39fa34d8..9f7a7e1e0c3 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
+obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
 obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
 obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
diff --git a/arch/arm/mach-tegra/include/mach/usb_phy.h b/arch/arm/mach-tegra/include/mach/usb_phy.h
new file mode 100644
index 00000000000..d4b8f9e298a
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/usb_phy.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/include/mach/usb_phy.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_USB_PHY_H
+#define __MACH_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+	int reset_gpio;
+	const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+	TEGRA_USB_PHY_MODE_DEVICE,
+	TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	enum tegra_usb_phy_mode mode;
+	void *config;
+	struct otg_transceiver *ulpi;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode);
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy);
+
+#endif /* __MACH_USB_PHY_H */
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
new file mode 100644
index 00000000000..88081bb3ec5
--- /dev/null
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -0,0 +1,795 @@
+/*
+ * arch/arm/mach-tegra/usb_phy.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *	Benoit Goby <benoit@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <asm/mach-types.h>
+#include <mach/usb_phy.h>
+#include <mach/iomap.h>
+
+#define ULPI_VIEWPORT		0x170
+
+#define USB_PORTSC1		0x184
+#define   USB_PORTSC1_PTS(x)	(((x) & 0x3) << 30)
+#define   USB_PORTSC1_PSPD(x)	(((x) & 0x3) << 26)
+#define   USB_PORTSC1_PHCD	(1 << 23)
+#define   USB_PORTSC1_WKOC	(1 << 22)
+#define   USB_PORTSC1_WKDS	(1 << 21)
+#define   USB_PORTSC1_WKCN	(1 << 20)
+#define   USB_PORTSC1_PTC(x)	(((x) & 0xf) << 16)
+#define   USB_PORTSC1_PP	(1 << 12)
+#define   USB_PORTSC1_SUSP	(1 << 7)
+#define   USB_PORTSC1_PE	(1 << 2)
+#define   USB_PORTSC1_CCS	(1 << 0)
+
+#define USB_SUSP_CTRL		0x400
+#define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
+#define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
+#define   USB_SUSP_CLR		(1 << 5)
+#define   USB_PHY_CLK_VALID	(1 << 7)
+#define   UTMIP_RESET			(1 << 11)
+#define   UHSIC_RESET			(1 << 11)
+#define   UTMIP_PHY_ENABLE		(1 << 12)
+#define   ULPI_PHY_ENABLE	(1 << 13)
+#define   USB_SUSP_SET		(1 << 14)
+#define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
+
+#define USB1_LEGACY_CTRL	0x410
+#define   USB1_NO_LEGACY_MODE			(1 << 0)
+#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
+#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+						(1 << 1)
+#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
+#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
+
+#define ULPI_TIMING_CTRL_0	0x424
+#define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
+#define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
+
+#define ULPI_TIMING_CTRL_1	0x428
+#define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
+#define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
+#define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
+#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
+#define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
+#define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1		0x804
+#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
+#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0		0x808
+#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
+#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
+#define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
+
+#define UTMIP_BIAS_CFG0		0x80c
+#define   UTMIP_OTGPD			(1 << 11)
+#define   UTMIP_BIASPD			(1 << 10)
+
+#define UTMIP_HSRX_CFG0		0x810
+#define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
+#define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1		0x814
+#define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0		0x820
+#define   UTMIP_FS_PREABMLE_J		(1 << 19)
+#define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
+
+#define UTMIP_MISC_CFG0		0x824
+#define   UTMIP_DPDM_OBSERVE		(1 << 26)
+#define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
+
+#define UTMIP_MISC_CFG1		0x828
+#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
+#define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0	0x82c
+#define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0	0x830
+#define   UTMIP_PD_CHRG			(1 << 0)
+
+#define UTMIP_SPARE_CFG0	0x834
+#define   FUSE_SETUP_SEL		(1 << 3)
+
+#define UTMIP_XCVR_CFG1		0x838
+#define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
+#define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
+#define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
+#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1		0x83c
+#define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static int utmip_pad_count;
+
+struct tegra_xtal_freq {
+	int freq;
+	u8 enable_delay;
+	u8 stable_count;
+	u8 active_delay;
+	u8 xtal_freq_count;
+	u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+	{
+		.freq = 12000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x2F,
+		.active_delay = 0x04,
+		.xtal_freq_count = 0x76,
+		.debounce = 0x7530,
+	},
+	{
+		.freq = 13000000,
+		.enable_delay = 0x02,
+		.stable_count = 0x33,
+		.active_delay = 0x05,
+		.xtal_freq_count = 0x7F,
+		.debounce = 0x7EF4,
+	},
+	{
+		.freq = 19200000,
+		.enable_delay = 0x03,
+		.stable_count = 0x4B,
+		.active_delay = 0x06,
+		.xtal_freq_count = 0xBB,
+		.debounce = 0xBB80,
+	},
+	{
+		.freq = 26000000,
+		.enable_delay = 0x04,
+		.stable_count = 0x66,
+		.active_delay = 0x09,
+		.xtal_freq_count = 0xFE,
+		.debounce = 0xFDE8,
+	},
+};
+
+static struct tegra_utmip_config utmip_default[] = {
+	[0] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 1,
+		.xcvr_lsrslew = 1,
+	},
+	[2] = {
+		.hssync_start_delay = 9,
+		.idle_wait_delay = 17,
+		.elastic_limit = 16,
+		.term_range_adj = 6,
+		.xcvr_setup = 9,
+		.xcvr_lsfslew = 2,
+		.xcvr_lsrslew = 2,
+	},
+};
+
+static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
+{
+	return (phy->instance == 1);
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+	phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+	if (IS_ERR(phy->pad_clk)) {
+		pr_err("%s: can't get utmip pad clock\n", __func__);
+		return PTR_ERR(phy->pad_clk);
+	}
+
+	if (phy->instance == 0) {
+		phy->pad_regs = phy->regs;
+	} else {
+		phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
+		if (!phy->pad_regs) {
+			pr_err("%s: can't remap usb registers\n", __func__);
+			clk_put(phy->pad_clk);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static void utmip_pad_close(struct tegra_usb_phy *phy)
+{
+	if (phy->instance != 0)
+		iounmap(phy->pad_regs);
+	clk_put(phy->pad_clk);
+}
+
+static void utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (utmip_pad_count++ == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val, flags;
+	void __iomem *base = phy->pad_regs;
+
+	if (!utmip_pad_count) {
+		pr_err("%s: utmip pad already powered off\n", __func__);
+		return -EINVAL;
+	}
+
+	clk_enable(phy->pad_clk);
+
+	spin_lock_irqsave(&utmip_pad_lock, flags);
+
+	if (--utmip_pad_count == 0) {
+		val = readl(base + UTMIP_BIAS_CFG0);
+		val |= UTMIP_OTGPD | UTMIP_BIASPD;
+		writel(val, base + UTMIP_BIAS_CFG0);
+	}
+
+	spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+	clk_disable(phy->pad_clk);
+
+	return 0;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+	unsigned long timeout = 2000;
+	do {
+		if ((readl(reg) & mask) == result)
+			return 0;
+		udelay(1);
+		timeout--;
+	} while (timeout);
+	return -1;
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val |= USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	if (phy->instance == 0) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+
+		udelay(10);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_CLR;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PHCD;
+		writel(val, base + USB_PORTSC1);
+	}
+
+	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+						     USB_PHY_CLK_VALID))
+		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_utmip_config *config = phy->config;
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val |= USB1_NO_LEGACY_MODE;
+		writel(val, base + USB1_LEGACY_CTRL);
+	}
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_FS_PREABMLE_J;
+	writel(val, base + UTMIP_TX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG0);
+	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+	writel(val, base + UTMIP_HSRX_CFG0);
+
+	val = readl(base + UTMIP_HSRX_CFG1);
+	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+	writel(val, base + UTMIP_HSRX_CFG1);
+
+	val = readl(base + UTMIP_DEBOUNCE_CFG0);
+	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+	writel(val, base + UTMIP_DEBOUNCE_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+	writel(val, base + UTMIP_MISC_CFG0);
+
+	val = readl(base + UTMIP_MISC_CFG1);
+	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
+	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+	writel(val, base + UTMIP_MISC_CFG1);
+
+	val = readl(base + UTMIP_PLL_CFG1);
+	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+	writel(val, base + UTMIP_PLL_CFG1);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmip_pad_power_on(phy);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
+		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
+		 UTMIP_XCVR_HSSLEW_MSB(~0));
+	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val &= ~UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_BIAS_CFG1);
+	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+	writel(val, base + UTMIP_BIAS_CFG1);
+
+	if (phy->instance == 0) {
+		val = readl(base + UTMIP_SPARE_CFG0);
+		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
+			val &= ~FUSE_SETUP_SEL;
+		else
+			val |= FUSE_SETUP_SEL;
+		writel(val, base + UTMIP_SPARE_CFG0);
+	}
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_SUSP_CTRL);
+		val |= UTMIP_PHY_ENABLE;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	if (phy->instance == 0) {
+		val = readl(base + USB1_LEGACY_CTRL);
+		val &= ~USB1_VBUS_SENSE_CTL_MASK;
+		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+		writel(val, base + USB1_LEGACY_CTRL);
+
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_SUSP_SET;
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	utmi_phy_clk_enable(phy);
+
+	if (phy->instance == 2) {
+		val = readl(base + USB_PORTSC1);
+		val &= ~USB_PORTSC1_PTS(~0);
+		writel(val, base + USB_PORTSC1);
+	}
+
+	return 0;
+}
+
+static void utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	utmi_phy_clk_disable(phy);
+
+	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
+		val = readl(base + USB_SUSP_CTRL);
+		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+		writel(val, base + USB_SUSP_CTRL);
+	}
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UTMIP_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + UTMIP_BAT_CHRG_CFG0);
+	val |= UTMIP_PD_CHRG;
+	writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG0);
+	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+	       UTMIP_FORCE_PDZI_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG0);
+
+	val = readl(base + UTMIP_XCVR_CFG1);
+	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+	       UTMIP_FORCE_PDDR_POWERDOWN;
+	writel(val, base + UTMIP_XCVR_CFG1);
+
+	utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val |= UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_TX_CFG0);
+	val &= ~UTMIP_HS_DISCON_DISABLE;
+	writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+				   enum tegra_usb_phy_port_speed port_speed)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+	else
+		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(1);
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val |= UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+
+	val = readl(base + UTMIP_MISC_CFG0);
+	val &= ~UTMIP_DPDM_OBSERVE;
+	writel(val, base + UTMIP_MISC_CFG0);
+	udelay(10);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+	int ret;
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	gpio_direction_output(config->reset_gpio, 0);
+	msleep(5);
+	gpio_direction_output(config->reset_gpio, 1);
+
+	clk_enable(phy->clk);
+	msleep(1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= UHSIC_RESET;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = readl(base + ULPI_TIMING_CTRL_0);
+	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+	writel(val, base + ULPI_TIMING_CTRL_0);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= ULPI_PHY_ENABLE;
+	writel(val, base + USB_SUSP_CTRL);
+
+	val = 0;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	val |= ULPI_DATA_TRIMMER_SEL(4);
+	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+	val |= ULPI_DIR_TRIMMER_SEL(4);
+	writel(val, base + ULPI_TIMING_CTRL_1);
+	udelay(10);
+
+	val |= ULPI_DATA_TRIMMER_LOAD;
+	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+	val |= ULPI_DIR_TRIMMER_LOAD;
+	writel(val, base + ULPI_TIMING_CTRL_1);
+
+	/* Fix VbusInvalid due to floating VBUS */
+	ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+	if (ret) {
+		pr_err("%s: ulpi write failed\n", __func__);
+		return ret;
+	}
+
+	val = readl(base + USB_PORTSC1);
+	val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
+	writel(val, base + USB_PORTSC1);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val |= USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+	udelay(100);
+
+	val = readl(base + USB_SUSP_CTRL);
+	val &= ~USB_SUSP_CLR;
+	writel(val, base + USB_SUSP_CTRL);
+
+	return 0;
+}
+
+static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+	unsigned long val;
+	void __iomem *base = phy->regs;
+	struct tegra_ulpi_config *config = phy->config;
+
+	/* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
+	 * Controller to immediately bring the ULPI PHY out of low power
+	 */
+	val = readl(base + USB_PORTSC1);
+	val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
+	writel(val, base + USB_PORTSC1);
+
+	gpio_direction_output(config->reset_gpio, 0);
+	clk_disable(phy->clk);
+}
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode)
+{
+	struct tegra_usb_phy *phy;
+	struct tegra_ulpi_config *ulpi_config;
+	unsigned long parent_rate;
+	int i;
+	int err;
+
+	phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
+	if (!phy)
+		return ERR_PTR(-ENOMEM);
+
+	phy->instance = instance;
+	phy->regs = regs;
+	phy->config = config;
+	phy->mode = phy_mode;
+
+	if (!phy->config) {
+		if (phy_is_ulpi(phy)) {
+			pr_err("%s: ulpi phy configuration missing", __func__);
+			err = -EINVAL;
+			goto err0;
+		} else {
+			phy->config = &utmip_default[instance];
+		}
+	}
+
+	phy->pll_u = clk_get_sys(NULL, "pll_u");
+	if (IS_ERR(phy->pll_u)) {
+		pr_err("Can't get pll_u clock\n");
+		err = PTR_ERR(phy->pll_u);
+		goto err0;
+	}
+	clk_enable(phy->pll_u);
+
+	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+		if (tegra_freq_table[i].freq == parent_rate) {
+			phy->freq = &tegra_freq_table[i];
+			break;
+		}
+	}
+	if (!phy->freq) {
+		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
+		err = -EINVAL;
+		goto err1;
+	}
+
+	if (phy_is_ulpi(phy)) {
+		ulpi_config = config;
+		phy->clk = clk_get_sys(NULL, ulpi_config->clk);
+		if (IS_ERR(phy->clk)) {
+			pr_err("%s: can't get ulpi clock\n", __func__);
+			err = -ENXIO;
+			goto err1;
+		}
+		tegra_gpio_enable(ulpi_config->reset_gpio);
+		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
+		gpio_direction_output(ulpi_config->reset_gpio, 0);
+		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+		phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
+	} else {
+		err = utmip_pad_open(phy);
+		if (err < 0)
+			goto err1;
+	}
+
+	return phy;
+
+err1:
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+err0:
+	kfree(phy);
+	return ERR_PTR(err);
+}
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		return ulpi_phy_power_on(phy);
+	else
+		return utmi_phy_power_on(phy);
+}
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		ulpi_phy_power_off(phy);
+	else
+		utmi_phy_power_off(phy);
+}
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_preresume(phy);
+}
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_postresume(phy);
+}
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_start(phy, port_speed);
+}
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_restore_end(phy);
+}
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_disable(phy);
+}
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+	if (!phy_is_ulpi(phy))
+		utmi_phy_clk_enable(phy);
+}
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy)
+{
+	if (phy_is_ulpi(phy))
+		clk_put(phy->clk);
+	else
+		utmip_pad_close(phy);
+	clk_disable(phy->pll_u);
+	clk_put(phy->pll_u);
+	kfree(phy);
+}
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 450a332f100..fe449f1a1c1 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
-enum ehci_hcd_omap_mode {
-	EHCI_HCD_OMAP_MODE_UNKNOWN,
-	EHCI_HCD_OMAP_MODE_PHY,
-	EHCI_HCD_OMAP_MODE_TLL,
-	EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-	OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
 
-	/* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -80,18 +98,18 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern int omap_usbhs_enable(struct device *dev);
+extern void omap_usbhs_disable(struct device *dev);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
-
+extern int omap4430_phy_suspend(struct device *dev, int suspend);
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h
index 546bb4008f4..80457c6414a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
+++ b/arch/arm/plat-s3c24xx/include/plat/udc.h
@@ -27,6 +27,10 @@ enum s3c2410_udc_cmd_e {
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
  	void	(*vbus_draw)(unsigned int ma);
+
+	unsigned int pullup_pin;
+	unsigned int pullup_pin_inverted;
+
 	unsigned int vbus_pin;
 	unsigned char vbus_pin_inverted;
 };