summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2007-06-12 14:34:47 +0200
committerHaavard Skinnemoen <hskinnemoen@atmel.com>2007-07-18 20:45:51 +0200
commita8e93ed8cb3d9aa22d192033009357526548c825 (patch)
tree40e551da96bfc4753853bb863f92eb6e56bd7115 /arch
parent9e58e1855c9815ad4944df90f695a7645c50f463 (diff)
[AVR32] Make STK1000 mux settings configurable
This adds some STK1002-specific config options covering the jumper settings, so the kernel can automatically be configured to include the relevant devices. One of them replaces the previous internal SW2_DEFAULT setting; SPI config is affected by two of the jumpers; and a fourth one switches between LCD and the second Ethernet connector. (There's more that to be done.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/avr32/Kconfig4
-rw-r--r--arch/avr32/boards/atstk1000/Kconfig53
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c30
3 files changed, 80 insertions, 7 deletions
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 8f37a14e637..d12346aaa88 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -113,6 +113,10 @@ config BOARD_ATNGW100
bool "ATNGW100 Network Gateway"
endchoice
+if BOARD_ATSTK1000
+source "arch/avr32/boards/atstk1000/Kconfig"
+endif
+
choice
prompt "Boot loader type"
default LOADER_U_BOOT
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
new file mode 100644
index 00000000000..71bc7d364fb
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -0,0 +1,53 @@
+# STK1000 customization
+
+if BOARD_ATSTK1002
+
+config BOARD_ATSTK1002_CUSTOM
+ bool "Non-default STK-1002 jumper settings"
+ help
+ You will normally leave the jumpers on the CPU card at their
+ default settings. If you need to use certain peripherals,
+ you will need to change some of those jumpers.
+
+if BOARD_ATSTK1002_CUSTOM
+
+config BOARD_ATSTK1002_SW1_CUSTOM
+ bool "SW1: use SSC1 (not SPI0)"
+ help
+ This also prevents using the external DAC as an audio interface,
+ and means you can't initialize the on-board QVGA display.
+
+config BOARD_ATSTK1002_SW2_CUSTOM
+ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+ help
+ If you change this you'll want an updated boot loader putting
+ the console on UART-C not UART-A.
+
+config BOARD_ATSTK1002_SW3_CUSTOM
+ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+ help
+ This also prevents using the external DAC as an audio interface.
+
+config BOARD_ATSTK1002_SW4_CUSTOM
+ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+ help
+ To use the camera interface you'll need a custom card (on the
+ PCI-format connector) connect a video sensor.
+
+config BOARD_ATSTK1002_SW5_CUSTOM
+ bool "SW5: use MACB1 (not LCDC)"
+
+config BOARD_ATSTK1002_SW6_CUSTOM
+ bool "SW6: more GPIOs (not MACB0)"
+
+endif # custom
+
+config BOARD_ATSTK1002_SPI1
+ bool "Configure SPI1 controller"
+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
+ help
+ All the signals for the second SPI controller are available on
+ GPIO lines and accessed through the J1 jumper block. Say "y"
+ here to configure that SPI controller.
+
+endif # stk 1002
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e253e86a1a3..6b2187f3503 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -27,7 +27,6 @@
#include "atstk1000.h"
-#define SW2_DEFAULT /* MMCI and UART_A available */
struct eth_addr {
u8 addr[6];
@@ -36,6 +35,7 @@ struct eth_addr {
static struct eth_addr __initdata hw_addr[2];
static struct eth_platform_data __initdata eth_data[2];
+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
static struct spi_board_info spi0_board_info[] __initdata = {
{
/* QVGA display */
@@ -45,6 +45,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
.mode = SPI_MODE_3,
},
};
+#endif
+
+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
+static struct spi_board_info spi1_board_info[] __initdata = { {
+ /* patch in custom entries here */
+} };
+#endif
/*
* The next two functions should go away as the boot loader is
@@ -103,10 +110,10 @@ static void __init set_hw_addr(struct platform_device *pdev)
void __init setup_board(void)
{
-#ifdef SW2_DEFAULT
- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-#else
+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
+#else
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
#endif
/* USART 2/unused: expansion connector */
at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
@@ -140,18 +147,27 @@ static int __init atstk1002_init(void)
at32_add_system_devices();
-#ifdef SW2_DEFAULT
- at32_add_device_usart(0);
-#else
+#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
at32_add_device_usart(1);
+#else
+ at32_add_device_usart(0);
#endif
at32_add_device_usart(2);
set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+#endif
+#ifdef CONFIG_BOARD_ATSTK1002_SPI1
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+#endif
+#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+#else
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size);
+#endif
return 0;
}