Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek
  [ARM] 5563/1: at91: at91sam9rlek lcd interface correction
  [ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link script
  [ARM] 5560/1: Avoid buffer overrun in case of an invalid IRQ
  [ARM] GTA02: build fixes (s3c2410_nand_set usage)
  [ARM] MINI2440: Add missing flash_bbt flat to NAND
  [ARM] s3c2410_defconfig: add MINI2440 machine to build
  [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices
  [ARM] S3C24XX: Fix missing s3c_iis_device.
  [ARM] MINI2440: remove duplicated #include
  [ARM] S3C24XX: Fix spi-bus configuration build errors
  OMAP: Fix IOMEM macro for assembly
  [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT
  [ARM] S3C24XX: Fix use of CONFIG_S3C24XX_PWM
  OMAP2/3: Initialize gpio debounce register
  OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry
  OMAP3: RX51: Use OneNAND sync read / write
  OMAP2/3: gpmc-onenand: correct use of async timings
  OMAP3: DMA: Enable idlemodes for DMA OCP
  OMAP3: SRAM size fix for HS/EMU devices
  ...

30 files changed, 189 insertions, 71 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade..a89e4734b8f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59b..b49810461e4 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a0..32860609e05 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f..9d32faef05f 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c..9c746af1bf6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d..b7c3490eaa2 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c8..69371028a20 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..a55398ed121 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..f6b5672cabd 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bb..ed2a48a9ce7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b4..6810b4aeb02 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234e..9a0bf6744a0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0..54fec53a48e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c6..a98201cc265 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925c..6f71f3730c9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd9..1541fd4c8d0 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
 	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[1];
+	struct twl_mmc_controller *c = NULL;
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
 
 	/* If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bd..ec71a696578 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
 #include <plat/mci.h>
 #include <plat/udc.h>
 
-#include <plat/regs-serial.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
+		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e..0fb385bd9cd 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
 		 */
 		.name		= "neo1973-nand",
 		.nr_chips	= 1,
-		.use_bbt	= 1,
-		.force_soft_ecc	= 1,
+		.flash_bbt	= 1,
 	},
 };
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..7677a4a1cef 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
+	/* Enable smartidle idlemodes and autoidle */
+	if (cpu_is_omap34xx()) {
+		u32 v = dma_read(OCP_SYSCONFIG);
+		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+				DMA_SYSCONFIG_SIDLEMODE_MASK |
+				DMA_SYSCONFIG_AUTOIDLE);
+		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_AUTOIDLE);
+		dma_write(v , OCP_SYSCONFIG);
+	}
+
+
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
 		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b..26b387c1242 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc2..285eaa3a827 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
 struct omap_chip_id {
 	u8 oc;
 	u8 type;
@@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 
 int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737..7b939cc0196 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
 #define DMA_THREAD_FIFO_25		(0x02 << 14)
 #define DMA_THREAD_FIFO_50		(0x03 << 14)
 
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
 /* Chaining modes*/
 #ifndef CONFIG_ARCH_OMAP1
 #define OMAP_DMA_STATIC_CHAIN		0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b281472056..73f483d56ca 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
 #define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
 
 #ifdef __ASSEMBLER__
-#define IOMEM(x)		x
+#define IOMEM(x)		(x)
 #else
 #define IOMEM(x)		((void __force __iomem *)(x))
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb..4a030139901 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b..4ea73804d21 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
 			if (cpu_is_omap34xx()) {
 				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+					omap_sram_size = 0x7000; /* 28K */
+				} else {
+					omap_sram_size = 0x8000; /* 32K */
+				}
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da4..0761766b183 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9..2e170827e0b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711d..579a165c282 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eed..da7a61728c1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad..86b9edc6741 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>