x86: coding style fixes for arch/x86/kernel/cpu/centaur.c

Kills more than 150 errors/warnings

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 114 insertions, 116 deletions

diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 194ec8311c3..710fe1ed073 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -11,21 +11,21 @@
 
 static u32 __cpuinit power2(u32 x)
 {
-	u32 s=1;
-	while(s<=x)
-		s<<=1;
-	return s>>=1;
+	u32 s = 1;
+	while(s <= x)
+		s <<= 1;
+	return s >>= 1;
 }
 
 
 /*
  *	Set up an actual MCR
  */
- 
+
 static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
 {
 	u32 lo, hi;
-	
+
 	hi = base & ~0xFFF;
 	lo = ~(size-1);		/* Size is a power of 2 so this makes a mask */
 	lo &= ~0xFFF;		/* Remove the ctrl value bits */
@@ -45,7 +45,7 @@ static u32 __cpuinit ramtop(void)		/* 16388 */
 	int i;
 	u32 top = 0;
 	u32 clip = 0xFFFFFFFFUL;
-	
+
 	for (i = 0; i < e820.nr_map; i++) {
 		unsigned long start, end;
 
@@ -55,10 +55,10 @@ static u32 __cpuinit ramtop(void)		/* 16388 */
 		 *	Don't MCR over reserved space. Ignore the ISA hole
 		 *	we frob around that catastrophe already
 		 */
-		 			
+
 		if (e820.map[i].type == E820_RESERVED)
 		{
-			if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+			if (e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
 				clip = e820.map[i].addr;
 			continue;
 		}
@@ -71,19 +71,19 @@ static u32 __cpuinit ramtop(void)		/* 16388 */
 	}
 	/* Everything below 'top' should be RAM except for the ISA hole.
 	   Because of the limited MCR's we want to map NV/ACPI into our
-	   MCR range for gunk in RAM 
-	   
+	   MCR range for gunk in RAM
+
 	   Clip might cause us to MCR insufficient RAM but that is an
 	   acceptable failure mode and should only bite obscure boxes with
 	   a VESA hole at 15Mb
-	   
+
 	   The second case Clip sometimes kicks in is when the EBDA is marked
 	   as reserved. Again we fail safe with reasonable results
 	*/
-	
-	if(top>clip)
-		top=clip;
-		
+
+	if(top > clip)
+		top = clip;
+
 	return top;
 }
 
@@ -99,8 +99,8 @@ static int __cpuinit centaur_mcr_compute(int nr, int key)
 	u32 top = root;
 	u32 floor = 0;
 	int ct = 0;
-	
-	while(ct<nr)
+
+	while (ct < nr)
 	{
 		u32 fspace = 0;
 
@@ -108,7 +108,7 @@ static int __cpuinit centaur_mcr_compute(int nr, int key)
 		 *	Find the largest block we will fill going upwards
 		 */
 
-		u32 high = power2(mem-top);	
+		u32 high = power2(mem-top);
 
 		/*
 		 *	Find the largest block we will fill going downwards
@@ -119,39 +119,37 @@ static int __cpuinit centaur_mcr_compute(int nr, int key)
 		/*
 		 *	Don't fill below 1Mb going downwards as there
 		 *	is an ISA hole in the way.
-		 */		
-		 
-		if(base <= 1024*1024)
+		 */
+
+		if (base <= 1024*1024)
 			low = 0;
-			
+
 		/*
 		 *	See how much space we could cover by filling below
 		 *	the ISA hole
 		 */
-		 
-		if(floor == 0)
+
+		if (floor == 0)
 			fspace = 512*1024;
-		else if(floor ==512*1024)
+		else if (floor == 512*1024)
 			fspace = 128*1024;
 
 		/* And forget ROM space */
-		
+
 		/*
 		 *	Now install the largest coverage we get
 		 */
-		 
-		if(fspace > high && fspace > low)
+
+		if (fspace > high && fspace > low)
 		{
 			centaur_mcr_insert(ct, floor, fspace, key);
 			floor += fspace;
 		}
-		else if(high > low)
-		{
+		else if (high > low) {
 			centaur_mcr_insert(ct, top, high, key);
 			top += high;
 		}
-		else if(low > 0)
-		{
+		else if (low > 0) {
 			base -= low;
 			centaur_mcr_insert(ct, base, low, key);
 		}
@@ -162,7 +160,7 @@ static int __cpuinit centaur_mcr_compute(int nr, int key)
 	 *	We loaded ct values. We now need to set the mask. The caller
 	 *	must do this bit.
 	 */
-	 
+
 	return ct;
 }
 
@@ -173,7 +171,7 @@ static void __cpuinit centaur_create_optimal_mcr(void)
 	 *	Allocate up to 6 mcrs to mark as much of ram as possible
 	 *	as write combining and weak write ordered.
 	 *
-	 *	To experiment with: Linux never uses stack operations for 
+	 *	To experiment with: Linux never uses stack operations for
 	 *	mmio spaces so we could globally enable stack operation wc
 	 *
 	 *	Load the registers with type 31 - full write combining, all
@@ -184,8 +182,8 @@ static void __cpuinit centaur_create_optimal_mcr(void)
 	/*
 	 *	Wipe unused MCRs
 	 */
-	 
-	for(i=used;i<8;i++)
+
+	for (i = used; i < 8; i++)
 		wrmsr(MSR_IDT_MCR0+i, 0, 0);
 }
 
@@ -205,21 +203,21 @@ static void __cpuinit winchip2_create_optimal_mcr(void)
 	 */
 
 	int used = centaur_mcr_compute(6, 25);
-	
+
 	/*
 	 *	Mark the registers we are using.
 	 */
-	 
+
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	for(i=0;i<used;i++)
-		lo|=1<<(9+i);
+	for (i = 0; i < used; i++)
+		lo |= 1<<(9+i);
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	
+
 	/*
 	 *	Wipe unused MCRs
 	 */
-	 
-	for(i=used;i<8;i++)
+
+	for (i = used; i < 8; i++)
 		wrmsr(MSR_IDT_MCR0+i, 0, 0);
 }
 
@@ -231,9 +229,9 @@ static void __cpuinit winchip2_unprotect_mcr(void)
 {
 	u32 lo, hi;
 	u32 key;
-	
+
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
+	lo &= ~0x1C0;	/* blank bits 8-6 */
 	key = (lo>>17) & 7;
 	lo |= key<<6;	/* replace with unlock key */
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
@@ -242,9 +240,9 @@ static void __cpuinit winchip2_unprotect_mcr(void)
 static void __cpuinit winchip2_protect_mcr(void)
 {
 	u32 lo, hi;
-	
+
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
+	lo &= ~0x1C0;	/* blank bits 8-6 */
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 }
 #endif /* CONFIG_X86_OOSTORE */
@@ -267,17 +265,17 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 
 		/* enable ACE unit, if present and disabled */
 		if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
-			rdmsr (MSR_VIA_FCR, lo, hi);
+			rdmsr(MSR_VIA_FCR, lo, hi);
 			lo |= ACE_FCR;		/* enable ACE unit */
-			wrmsr (MSR_VIA_FCR, lo, hi);
+			wrmsr(MSR_VIA_FCR, lo, hi);
 			printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
 		}
 
 		/* enable RNG unit, if present and disabled */
 		if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
-			rdmsr (MSR_VIA_RNG, lo, hi);
+			rdmsr(MSR_VIA_RNG, lo, hi);
 			lo |= RNG_ENABLE;	/* enable RNG unit */
-			wrmsr (MSR_VIA_RNG, lo, hi);
+			wrmsr(MSR_VIA_RNG, lo, hi);
 			printk(KERN_INFO "CPU: Enabled h/w RNG\n");
 		}
 
@@ -288,15 +286,15 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	}
 
 	/* Cyrix III family needs CX8 & PGE explicitly enabled. */
-	if (c->x86_model >=6 && c->x86_model <= 9) {
-		rdmsr (MSR_VIA_FCR, lo, hi);
+	if (c->x86_model >= 6 && c->x86_model <= 9) {
+		rdmsr(MSR_VIA_FCR, lo, hi);
 		lo |= (1<<1 | 1<<7);
-		wrmsr (MSR_VIA_FCR, lo, hi);
+		wrmsr(MSR_VIA_FCR, lo, hi);
 		set_bit(X86_FEATURE_CX8, c->x86_capability);
 	}
 
 	/* Before Nehemiah, the C3's had 3dNOW! */
-	if (c->x86_model >=6 && c->x86_model <9)
+	if (c->x86_model >= 6 && c->x86_model < 9)
 		set_bit(X86_FEATURE_3DNOW, c->x86_capability);
 
 	get_model_name(c);
@@ -306,31 +304,31 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 	enum {
-		ECX8=1<<1,
-		EIERRINT=1<<2,
-		DPM=1<<3,
-		DMCE=1<<4,
-		DSTPCLK=1<<5,
-		ELINEAR=1<<6,
-		DSMC=1<<7,
-		DTLOCK=1<<8,
-		EDCTLB=1<<8,
-		EMMX=1<<9,
-		DPDC=1<<11,
-		EBRPRED=1<<12,
-		DIC=1<<13,
-		DDC=1<<14,
-		DNA=1<<15,
-		ERETSTK=1<<16,
-		E2MMX=1<<19,
-		EAMD3D=1<<20,
+		ECX8 = 1<<1,
+		EIERRINT = 1<<2,
+		DPM = 1<<3,
+		DMCE = 1<<4,
+		DSTPCLK = 1<<5,
+		ELINEAR = 1<<6,
+		DSMC = 1<<7,
+		DTLOCK = 1<<8,
+		EDCTLB = 1<<8,
+		EMMX = 1<<9,
+		DPDC = 1<<11,
+		EBRPRED = 1<<12,
+		DIC = 1<<13,
+		DDC = 1<<14,
+		DNA = 1<<15,
+		ERETSTK = 1<<16,
+		E2MMX = 1<<19,
+		EAMD3D = 1<<20,
 	};
 
 	char *name;
-	u32  fcr_set=0;
-	u32  fcr_clr=0;
-	u32  lo,hi,newlo;
-	u32  aa,bb,cc,dd;
+	u32  fcr_set = 0;
+	u32  fcr_clr = 0;
+	u32  lo, hi, newlo;
+	u32  aa, bb, cc, dd;
 
 	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
@@ -338,12 +336,12 @@ static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 
 	switch (c->x86) {
 
-		case 5:
-			switch(c->x86_model) {
+	case 5:
+			switch (c->x86_model) {
 			case 4:
-				name="C6";
-				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
-				fcr_clr=DPDC;
+				name = "C6";
+				fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+				fcr_clr = DPDC;
 				printk(KERN_NOTICE "Disabling bugged TSC.\n");
 				clear_bit(X86_FEATURE_TSC, c->x86_capability);
 #ifdef CONFIG_X86_OOSTORE
@@ -351,29 +349,29 @@ static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 				/* Enable
 					write combining on non-stack, non-string
 					write combining on string, all types
-					weak write ordering 
-					
-				   The C6 original lacks weak read order 
-				   
+					weak write ordering
+
+				   The C6 original lacks weak read order
+
 				   Note 0x120 is write only on Winchip 1 */
-				   
+
 				wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
-#endif				
+#endif
 				break;
 			case 8:
-				switch(c->x86_mask) {
+				switch (c->x86_mask) {
 				default:
-					name="2";
+					name = "2";
 					break;
 				case 7 ... 9:
-					name="2A";
+					name = "2A";
 					break;
 				case 10 ... 15:
-					name="2B";
+					name = "2B";
 					break;
 				}
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
+				fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr = DPDC;
 #ifdef CONFIG_X86_OOSTORE
 				winchip2_unprotect_mcr();
 				winchip2_create_optimal_mcr();
@@ -381,17 +379,17 @@ static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 				/* Enable
 					write combining on non-stack, non-string
 					write combining on string, all types
-					weak write ordering 
+					weak write ordering
 				*/
-				lo|=31;				
+				lo |= 31;
 				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 				winchip2_protect_mcr();
 #endif
 				break;
 			case 9:
-				name="3";
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
+				name = "3";
+				fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
+				fcr_clr = DPDC;
 #ifdef CONFIG_X86_OOSTORE
 				winchip2_unprotect_mcr();
 				winchip2_create_optimal_mcr();
@@ -399,50 +397,50 @@ static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 				/* Enable
 					write combining on non-stack, non-string
 					write combining on string, all types
-					weak write ordering 
+					weak write ordering
 				*/
-				lo|=31;				
+				lo |= 31;
 				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 				winchip2_protect_mcr();
 #endif
 				break;
 			default:
-				name="??";
+				name = "??";
 			}
 
 			rdmsr(MSR_IDT_FCR1, lo, hi);
-			newlo=(lo|fcr_set) & (~fcr_clr);
+			newlo = (lo|fcr_set) & (~fcr_clr);
 
-			if (newlo!=lo) {
-				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
-				wrmsr(MSR_IDT_FCR1, newlo, hi );
+			if (newlo != lo) {
+				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo);
+				wrmsr(MSR_IDT_FCR1, newlo, hi);
 			} else {
-				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
+				printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
 			}
 			/* Emulate MTRRs using Centaur's MCR. */
 			set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
 			/* Report CX8 */
 			set_bit(X86_FEATURE_CX8, c->x86_capability);
 			/* Set 3DNow! on Winchip 2 and above. */
-			if (c->x86_model >=8)
+			if (c->x86_model >= 8)
 				set_bit(X86_FEATURE_3DNOW, c->x86_capability);
 			/* See if we can find out some more. */
-			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
+			if (cpuid_eax(0x80000000) >= 0x80000005) {
 				/* Yes, we can. */
-				cpuid(0x80000005,&aa,&bb,&cc,&dd);
+				cpuid(0x80000005, &aa, &bb, &cc, &dd);
 				/* Add L1 data and code cache sizes. */
 				c->x86_cache_size = (cc>>24)+(dd>>24);
 			}
-			sprintf( c->x86_model_id, "WinChip %s", name );
+			sprintf(c->x86_model_id, "WinChip %s", name);
 			break;
 
-		case 6:
+	case 6:
 			init_c3(c);
 			break;
 	}
 }
 
-static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* VIA C3 CPUs (670-68F) need further shifting. */
 	if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
@@ -451,8 +449,8 @@ static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigne
 	/* VIA also screwed up Nehemiah stepping 1, and made
 	   it return '65KB' instead of '64KB'
 	   - Note, it seems this may only be in engineering samples. */
-	if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
-		size -=1;
+	if ((c->x86 == 6) && (c->x86_model == 9) && (c->x86_mask == 1) && (size == 65))
+		size -= 1;
 
 	return size;
 }