diff options
| author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-20 20:19:15 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-20 20:19:15 -0700 |
| commit | cfa76f024f7c9e65169425804e5b32e71f66d0ee (patch) | |
| tree | ee64e98cbfb1b654842c9256446a9584857f6730 /arch | |
| parent | 093faa1dd26fc6766f8f04c429030757a8a0def4 (diff) | |
| parent | 7210c678202bb3107085bffeb63f66a9b8ba1c85 (diff) | |
Merge branch 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
[PARISC] fix uninitialized variable warning in asm/rtc.h
[PARISC] Port checkstack.pl to parisc
[PARISC] Make palo target work when $obj != $src
[PARISC] Zap unused variable warnings in pci.c
[PARISC] Fix tests in palo target
[PARISC] Fix palo target
[PARISC] Restore palo target
[PARISC] Attempt to clean up parisc/Makefile
[PARISC] Fix infinite loop in /proc/iomem
[PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
[PARISC] Squelch pci_enable_device __must_check warning in superio
[PARISC] Kill off broken irqstack code
[PARISC] Remove hardcoded uses of PAGE_SIZE
[PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
[PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
[PARISC] Kill off ASM_PAGE_SIZE use
[PARISC] Beautify parisc vmlinux.lds.S
[PARISC] Clean up a resource_size_t warning in sba_iommu
[PARISC] Kill incorrect cast warning in unwinder
[PARISC] Kill zone_to_nid printk warning
...
Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
Diffstat (limited to 'arch')
55 files changed, 6329 insertions, 1629 deletions
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index f3d0d7c7097..ae4a9b3d4fd 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -19,26 +19,27 @@ NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 +MACHINE := $(shell uname -m) +ifeq ($(MACHINE),parisc*) +NATIVE := 1 +endif + ifdef CONFIG_64BIT -CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \ - echo hppa64-linux-gnu-; else echo hppa64-linux-; fi) UTS_MACHINE := parisc64 CHECKFLAGS += -D__LP64__=1 -m64 -else -MACHINE := $(subst 64,,$(shell uname -m)) -ifneq ($(MACHINE),parisc) -CROSS_COMPILE := hppa-linux- -endif +WIDTH := 64 +CROSS_COMPILE := hppa64-linux-gnu- +else # 32-bit +WIDTH := endif -FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align +# attempt to help out folks who are cross-compiling +ifeq ($(NATIVE),1) +CROSS_COMPILE := hppa$(WIDTH)-linux- +endif OBJCOPY_FLAGS =-O binary -R .note -R .comment -S -ifneq ($(call cc-ifversion, -lt, 0303, "bad"),) -$(error Sorry, GCC v3.3 or above is required.) -endif - cflags-y := -pipe # These flags should be implied by an hppa-linux configuration, but they @@ -69,7 +70,7 @@ kernel-y := mm/ kernel/ math-emu/ kernel/init_task.o kernel-$(CONFIG_HPUX) += hpux/ core-y += $(addprefix arch/parisc/, $(kernel-y)) -libs-y += arch/parisc/lib/ `$(CC) -print-libgcc-file-name` +libs-y += arch/parisc/lib/ drivers-$(CONFIG_OPROFILE) += arch/parisc/oprofile/ @@ -77,27 +78,27 @@ PALO := $(shell if which palo; then : ; \ elif [ -x /sbin/palo ]; then echo /sbin/palo; \ fi) +PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \ + else echo $(obj)/palo.conf; \ + fi) + palo: vmlinux - @if [ -x $PALO ]; then \ + @if test ! -x "$(PALO)"; then \ echo 'ERROR: Please install palo first (apt-get install palo)';\ echo 'or build it from source and install it somewhere in your $$PATH';\ false; \ fi - @if [ ! -f ./palo.conf ]; then \ - cp arch/parisc/defpalo.conf palo.conf; \ - echo 'A generic palo config file (./palo.conf) has been created for you.'; \ + @if test ! -f "$(PALOCONF)"; then \ + cp $(src)/arch/parisc/defpalo.conf $(obj)/palo.conf; \ + echo 'A generic palo config file ($(obj)/palo.conf) has been created for you.'; \ echo 'You should check it and re-run "make palo".'; \ echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \ false; \ fi - $(PALO) -f ./palo.conf - -oldpalo: vmlinux - export TOPDIR=`pwd`; \ - unset STRIP LDFLAGS CPP CPPFLAGS AFLAGS CFLAGS CC LD; cd ../palo && make lifimage + $(PALO) -f $(PALOCONF) -# Shorthands for known targets not supported by parisc, use palo as default -Image zImage bzImage: palo +# Shorthands for known targets not supported by parisc, use vmlinux as default +Image zImage bzImage: vmlinux kernel_install: vmlinux sh $(src)/arch/parisc/install.sh \ @@ -116,3 +117,12 @@ define archhelp @echo ' (distribution) /sbin/installkernel or' @echo ' copy to $$(INSTALL_PATH)' endef + +# we require gcc 3.3 or above to compile the kernel +archprepare: checkbin +checkbin: + @if test "$(call cc-version)" -lt "0303"; then \ + echo -n "Sorry, GCC v3.3 or above is required to build " ; \ + echo "the kernel." ; \ + false ; \ + fi diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 41fd0696bbe..9fc96e72716 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,39 +1,51 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-pa6 -# Sun Mar 26 19:59:51 2006 +# Linux kernel version: 2.6.23 +# Fri Oct 12 21:00:07 2007 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -43,31 +55,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -91,6 +101,9 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_PREEMPT_NONE is not set @@ -98,6 +111,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SELECT_MEMORY_MODEL=y @@ -108,6 +122,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HPUX is not set # @@ -120,6 +137,7 @@ CONFIG_GSC_LASI=y # CONFIG_GSC_WAX is not set # CONFIG_EISA is not set # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -127,14 +145,11 @@ CONFIG_GSC_LASI=y # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # PA-RISC specific drivers # CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # @@ -151,13 +166,15 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -174,17 +191,23 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -192,37 +215,18 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -234,7 +238,6 @@ CONFIG_LLC2=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -250,7 +253,17 @@ CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -259,39 +272,24 @@ CONFIG_NET_PKTGEN=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=y CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -300,13 +298,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -314,6 +310,9 @@ CONFIG_ATA_OVER_ETH=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -333,104 +332,61 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_ZALON is not set CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set # CONFIG_NET_POCKET is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ATMEL is not set -# CONFIG_HOSTAP is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -442,26 +398,22 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -486,14 +438,22 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=m # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -516,6 +476,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -523,6 +484,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_GSC=y CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -545,36 +507,15 @@ CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m # CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -582,46 +523,59 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# CONFIG_FB_STI=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set @@ -633,6 +587,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y CONFIG_FONTS=y @@ -646,16 +601,11 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -673,9 +623,11 @@ CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -685,8 +637,10 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +# CONFIG_SND_PORTMAN2X4 is not set # # GSC devices @@ -694,15 +648,25 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_HARMONY=y # -# Open Sound System +# System on Chip audio support # -# CONFIG_SOUND_PRIME is not set +# CONFIG_SND_SOC is not set # -# USB support +# SoC Audio support for SuperH # + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -712,19 +676,28 @@ CONFIG_SND_HARMONY=y # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients # -# CONFIG_MMC is not set # -# InfiniBand support +# DMA Devices # +# CONFIG_AUXDISPLAY is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -734,6 +707,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -744,15 +718,16 @@ CONFIG_JFS_FS=m # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -783,11 +758,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -795,6 +771,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -806,6 +783,8 @@ CONFIG_RAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set # # Network File Systems @@ -827,6 +806,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -834,12 +814,13 @@ CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -892,6 +873,11 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -901,21 +887,32 @@ CONFIG_OPROFILE=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_DEBUG_RODATA=y # @@ -924,12 +921,13 @@ CONFIG_DEBUG_RODATA=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -938,9 +936,18 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -949,21 +956,28 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index f3b812f0459..ea071218a3e 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,73 +1,98 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc5-pa1 -# Fri Oct 21 23:04:54 2005 +# Linux kernel version: 2.6.23 +# Fri Oct 12 21:12:44 2007 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_TIME_LOW_RES=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_IRQ_PER_CPU=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CPUSETS is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features @@ -80,11 +105,23 @@ CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y CONFIG_64BIT=y +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NODES_SHIFT=3 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SELECT_MEMORY_MODEL=y @@ -95,7 +132,10 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_PREEMPT is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -104,7 +144,7 @@ CONFIG_NR_CPUS=8 # # CONFIG_GSC is not set CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y @@ -124,13 +164,14 @@ CONFIG_CARDBUS=y # PC-card bridges # CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=m - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -139,6 +180,7 @@ CONFIG_PCCARD_NONSTATIC=m # CONFIG_SUPERIO is not set # CONFIG_CHASSIS_LCD_LED is not set CONFIG_PDC_CHASSIS=y +CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # @@ -160,7 +202,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -177,97 +222,97 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m # CONFIG_IP_NF_TARGET_TTL is not set -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -277,48 +322,38 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -# CONFIG_IP6_NF_MATCH_LIMIT is not set -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -# CONFIG_IP6_NF_MATCH_MULTIPORT is not set # CONFIG_IP6_NF_MATCH_OWNER is not set -# CONFIG_IP6_NF_MATCH_MARK is not set CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AHESP is not set -# CONFIG_IP6_NF_MATCH_LENGTH is not set +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_MH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_MARK is not set # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -329,11 +364,13 @@ CONFIG_LLC2=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set # # Network testing @@ -342,7 +379,17 @@ CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -351,34 +398,17 @@ CONFIG_NET_PKTGEN=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -391,21 +421,14 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -413,6 +436,9 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -432,18 +458,18 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -451,59 +477,40 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -CONFIG_SCSI_QLOGIC_FC=m -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_QLOGIC_1280=m -# CONFIG_SCSI_QLOGIC_1280_1040 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m - -# -# PCMCIA SCSI adapter support -# -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -517,39 +524,25 @@ CONFIG_FUSION_FC=m # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -558,10 +551,6 @@ CONFIG_MII=m CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m CONFIG_TYPHOON=m - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=y @@ -573,15 +562,18 @@ CONFIG_TULIP_MMIO=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set CONFIG_PCMCIA_XIRCOM=m -# CONFIG_PCMCIA_XIRTULIP is not set CONFIG_HP100=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m +# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set @@ -593,84 +585,46 @@ CONFIG_E100=m # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -CONFIG_PCMCIA_NETWAVE=m - -# -# Wireless 802.11 Frequency Hopping cards support -# -CONFIG_PCMCIA_RAYCS=m - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -# CONFIG_NORTEL_HERMES is not set -CONFIG_PCI_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_WL3501=m - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -680,10 +634,6 @@ CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -694,28 +644,25 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -732,6 +679,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -747,6 +695,7 @@ CONFIG_INPUT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -754,8 +703,10 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=17 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y @@ -765,83 +716,73 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # # Non-8250 serial port support # -# CONFIG_SERIAL_MUX is not set CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# +CONFIG_AGP=y +CONFIG_AGP_PARISC=y # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -856,34 +797,47 @@ CONFIG_DUMMY_CONSOLE_ROWS=64 # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# DMA Engine support # -# CONFIG_MMC is not set +# CONFIG_DMA_ENGINE is not set # -# InfiniBand support +# DMA Clients # -# CONFIG_INFINIBAND is not set # -# SN Devices +# DMA Devices # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -891,6 +845,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -901,14 +856,16 @@ CONFIG_JFS_FS=m # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -939,18 +896,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -963,6 +922,7 @@ CONFIG_RAMFS=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set # # Network File Systems @@ -983,6 +943,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -990,12 +951,13 @@ CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1048,6 +1010,11 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -1057,19 +1024,34 @@ CONFIG_OPROFILE=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_IOREMAP is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_RWLOCK is not set +# CONFIG_DEBUG_RODATA is not set # # Security options @@ -1077,12 +1059,13 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y @@ -1091,32 +1074,47 @@ CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set +CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 35093612ad2..1bf22c9a461 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,38 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc1-pa0 -# Tue Jan 17 08:21:01 2006 +# Linux kernel version: 2.6.23 +# Fri Oct 12 21:16:46 2007 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # # CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -42,30 +51,27 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -89,16 +95,26 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_PREEMPT is not set +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HPUX is not set # @@ -113,7 +129,7 @@ CONFIG_EISA=y CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set @@ -124,14 +140,11 @@ CONFIG_GSC_DINO=y # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # PA-RISC specific drivers # CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # @@ -151,6 +164,8 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -167,18 +182,32 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -199,7 +228,14 @@ CONFIG_IPV6=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -208,39 +244,24 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# +CONFIG_PARPORT_NOT_PC=y # CONFIG_PNP is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set @@ -251,15 +272,13 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=y - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set # CONFIG_IDE is not set # @@ -267,6 +286,8 @@ CONFIG_ATA_OVER_ETH=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -286,18 +307,17 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -308,12 +328,14 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -327,23 +349,22 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=40 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set @@ -351,22 +372,14 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=y +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -382,35 +395,21 @@ CONFIG_MD_RAID6=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# An alternative FireWire stack is available with EXPERIMENTAL=y # +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_LASI_82596=y @@ -420,10 +419,6 @@ CONFIG_LASI_82596=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y CONFIG_TULIP=y # CONFIG_TULIP_MMIO is not set @@ -435,62 +430,47 @@ CONFIG_TULIP=y # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PLIP is not set @@ -501,24 +481,19 @@ CONFIG_PPP=y # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=y # CONFIG_NET_FC is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -543,19 +518,31 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_HP_SDC_RTC is not set @@ -579,6 +566,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -586,17 +574,20 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_GSC=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set # CONFIG_SERIAL_8250_FOURPORT is not set # CONFIG_SERIAL_8250_ACCENT is not set # CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set # CONFIG_SERIAL_8250_HUB6 is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support @@ -605,6 +596,7 @@ CONFIG_SERIAL_MUX=y CONFIG_SERIAL_MUX_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -612,35 +604,18 @@ CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# +# CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -648,46 +623,59 @@ CONFIG_GEN_RTC=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -698,16 +686,18 @@ CONFIG_FB_STI=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set # CONFIG_FB_VIRTUAL is not set # @@ -717,21 +707,17 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -749,8 +735,11 @@ CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -760,13 +749,16 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +# CONFIG_SND_PORTMAN2X4 is not set # # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -778,6 +770,18 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -791,11 +795,13 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -812,15 +818,25 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_HARMONY=y # -# Open Sound System +# System on Chip audio support # -# CONFIG_SOUND_PRIME is not set +# CONFIG_SND_SOC is not set # -# USB support +# SoC Audio support for SuperH +# + +# +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -831,20 +847,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# DMA Engine support # -# CONFIG_MMC is not set +# CONFIG_DMA_ENGINE is not set # -# InfiniBand support +# DMA Clients # -# CONFIG_INFINIBAND is not set # -# SN Devices +# DMA Devices # +# CONFIG_AUXDISPLAY is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set # # File systems @@ -860,9 +885,11 @@ CONFIG_JBD=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -889,11 +916,12 @@ CONFIG_JOLIET=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -912,6 +940,7 @@ CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set @@ -982,22 +1011,32 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_IOREMAP is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_RODATA is not set # @@ -1007,13 +1046,10 @@ CONFIG_FORCED_INLINING=y CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=y -# CONFIG_SECURITY_SECLVL is not set -# CONFIG_SECURITY_SELINUX is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1023,7 +1059,12 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1034,19 +1075,26 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index eb2f9a3d515..c6def3c1d20 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,39 +1,50 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-pa6 -# Sun Mar 26 20:03:29 2006 +# Linux kernel version: 2.6.23 +# Fri Oct 12 21:24:00 2007 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -43,31 +54,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -93,6 +102,9 @@ CONFIG_PA8X00=y CONFIG_PA20=y CONFIG_PREFETCH=y # CONFIG_64BIT is not set +CONFIG_PARISC_PAGE_SIZE_4KB=y +# CONFIG_PARISC_PAGE_SIZE_16KB is not set +# CONFIG_PARISC_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_PREEMPT_NONE is not set @@ -100,6 +112,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SELECT_MEMORY_MODEL=y @@ -110,6 +123,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HPUX is not set # @@ -117,7 +133,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # # CONFIG_GSC is not set CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y @@ -127,10 +143,6 @@ CONFIG_IOMMU_SBA=y # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -139,6 +151,7 @@ CONFIG_IOMMU_SBA=y CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y # CONFIG_PDC_CHASSIS is not set +CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # @@ -155,13 +168,15 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -178,22 +193,36 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y @@ -201,42 +230,24 @@ CONFIG_NETFILTER_DEBUG=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration (EXPERIMENTAL) # # CONFIG_IP6_NF_QUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -247,7 +258,6 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -263,7 +273,17 @@ CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -272,33 +292,17 @@ CONFIG_NET_PKTGEN=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -310,14 +314,15 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -331,19 +336,26 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set +CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -354,8 +366,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -365,10 +379,10 @@ CONFIG_BLK_DEV_SIIMAGE=m # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -376,6 +390,9 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -395,18 +412,17 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -415,66 +431,53 @@ CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set -CONFIG_SCSI_ATA_PIIX=m -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_PDC_ADMA is not set -# CONFIG_SCSI_SATA_QSTOR is not set -CONFIG_SCSI_SATA_PROMISE=m -# CONFIG_SCSI_SATA_SX4 is not set -CONFIG_SCSI_SATA_SIL=m -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -CONFIG_SCSI_SATA_VIA=m -# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set CONFIG_SCSI_DEBUG=m - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m # CONFIG_DM_MULTIPATH_EMC is not set +# CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -485,49 +488,31 @@ CONFIG_FUSION_SPI=m # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=y @@ -539,13 +524,16 @@ CONFIG_TULIP_MMIO=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set @@ -558,16 +546,15 @@ CONFIG_E100=m # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -579,27 +566,36 @@ CONFIG_E1000=m # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -612,27 +608,23 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -655,11 +647,14 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -679,6 +674,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -686,6 +682,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=13 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -704,38 +701,19 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# +# CONFIG_AGP is not set # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -743,46 +721,59 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -793,17 +784,20 @@ CONFIG_FB_STI=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set # @@ -813,21 +807,17 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -845,9 +835,11 @@ CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -855,7 +847,6 @@ CONFIG_SND_SUPPORT_OLD_API=y # Generic devices # CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -866,7 +857,7 @@ CONFIG_SND_AC97_BUS=y # PCI devices # CONFIG_SND_AD1889=y -# CONFIG_SND_AD1889_OPL3 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -879,6 +870,18 @@ CONFIG_SND_AD1889=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -898,6 +901,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -907,22 +911,43 @@ CONFIG_SND_AD1889=y # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# # # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y @@ -930,7 +955,7 @@ CONFIG_USB_DEBUG=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -940,15 +965,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m @@ -970,54 +996,14 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # @@ -1034,16 +1020,22 @@ CONFIG_USB_MICROTEK=m # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -1054,22 +1046,30 @@ CONFIG_USB_LEGOTOWER=m # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# DMA Engine support # -# CONFIG_MMC is not set +# CONFIG_DMA_ENGINE is not set # -# InfiniBand support +# DMA Clients # -# CONFIG_INFINIBAND is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# DMA Devices # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1077,21 +1077,23 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1121,11 +1123,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1164,6 +1167,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1171,7 +1175,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1224,6 +1227,11 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -1233,21 +1241,32 @@ CONFIG_OPROFILE=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_DEBUG_RODATA=y # @@ -1255,12 +1274,12 @@ CONFIG_DEBUG_RODATA=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m @@ -1269,7 +1288,15 @@ CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1280,21 +1307,28 @@ CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig index b38b58eb9dc..448a757b06c 100644 --- a/arch/parisc/defconfig +++ b/arch/parisc/defconfig @@ -1,39 +1,51 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-pa10 -# Sun Apr 2 15:26:38 2006 +# Linux kernel version: 2.6.23 +# Fri Oct 12 20:54:57 2007 # CONFIG_PARISC=y CONFIG_MMU=y CONFIG_STACK_GROWSUP=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_IRQ_PER_CPU=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -43,31 +55,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -101,6 +111,7 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SELECT_MEMORY_MODEL=y @@ -111,6 +122,9 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HPUX is not set # @@ -125,7 +139,7 @@ CONFIG_EISA=y CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_DEBUG is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y @@ -154,10 +168,6 @@ CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=y CONFIG_I82092=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -166,6 +176,7 @@ CONFIG_PCCARD_NONSTATIC=y CONFIG_SUPERIO=y CONFIG_CHASSIS_LCD_LED=y CONFIG_PDC_CHASSIS=y +CONFIG_PDC_CHASSIS_WARN=y CONFIG_PDC_STABLE=y # @@ -182,13 +193,15 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -205,33 +218,39 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -243,7 +262,6 @@ CONFIG_LLC2=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -259,7 +277,17 @@ CONFIG_LLC2=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -268,41 +296,26 @@ CONFIG_LLC2=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=y CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_GSC=y +# CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set @@ -317,13 +330,14 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -334,24 +348,32 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set +CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set @@ -362,8 +384,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -373,10 +397,10 @@ CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -384,6 +408,9 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -403,18 +430,17 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -424,11 +450,13 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -438,55 +466,45 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y +# CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set CONFIG_SCSI_ZALON=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 -# CONFIG_SCSI_NCR53C8XX_PROFILE is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=y +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -499,35 +517,20 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y @@ -536,10 +539,6 @@ CONFIG_LASI_82596=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y @@ -554,6 +553,10 @@ CONFIG_TULIP=y # CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -561,7 +564,6 @@ CONFIG_NET_PCI=y # CONFIG_AC3200 is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set @@ -577,15 +579,14 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -597,64 +598,36 @@ CONFIG_ACENIC=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set - -# -# Token Ring devices -# +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=y -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support +# Wireless LAN # -CONFIG_PCMCIA_HERMES=y -CONFIG_PCMCIA_SPECTRUM=y -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -664,10 +637,6 @@ CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -681,27 +650,23 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -726,14 +691,23 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_HIL_OLD is not set CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -757,6 +731,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -764,6 +739,8 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_GSC=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=y CONFIG_SERIAL_8250_NR_UARTS=17 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -788,25 +765,14 @@ CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m # CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# +# CONFIG_AGP is not set # CONFIG_DRM is not set # @@ -816,16 +782,8 @@ CONFIG_GEN_RTC_X=y # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -833,46 +791,59 @@ CONFIG_GEN_RTC_X=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -883,17 +854,20 @@ CONFIG_FB_STI=y # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set # @@ -903,6 +877,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=128 CONFIG_DUMMY_CONSOLE_ROWS=48 CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_STI_CONSOLE=y CONFIG_FONTS=y @@ -916,16 +891,11 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -938,35 +908,36 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # -CONFIG_SND_OPL3_LIB=y CONFIG_SND_AC97_CODEC=y -CONFIG_SND_AC97_BUS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set +# CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +# CONFIG_SND_PORTMAN2X4 is not set # # PCI devices # CONFIG_SND_AD1889=y -CONFIG_SND_AD1889_OPL3=y +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -979,6 +950,18 @@ CONFIG_SND_AD1889_OPL3=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -998,6 +981,7 @@ CONFIG_SND_AD1889_OPL3=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -1007,15 +991,19 @@ CONFIG_SND_AD1889_OPL3=y # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AC97_POWER_SAVE is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set # # PCMCIA devices # +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set # # GSC devices @@ -1023,15 +1011,34 @@ CONFIG_SND_AD1889_OPL3=y CONFIG_SND_HARMONY=y # +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1039,7 +1046,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -1049,15 +1056,16 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -1072,52 +1080,10 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # @@ -1135,16 +1101,22 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -1155,20 +1127,29 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set # -# MMC/SD Card support +# DMA Engine support # -# CONFIG_MMC is not set +# CONFIG_DMA_ENGINE is not set # -# InfiniBand support +# DMA Clients # -# CONFIG_INFINIBAND is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# DMA Devices +# +# CONFIG_AUXDISPLAY is not set + +# +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1178,16 +1159,19 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y @@ -1217,11 +1201,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1229,6 +1214,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1261,6 +1247,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -1268,12 +1255,13 @@ CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1326,6 +1314,11 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -1335,21 +1328,32 @@ CONFIG_OPROFILE=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_RODATA is not set # @@ -1358,12 +1362,13 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -1372,9 +1377,18 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -1383,21 +1397,28 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S index 0b9d5b1e4b3..38a1c1b8d4e 100644 --- a/arch/parisc/hpux/gate.S +++ b/arch/parisc/hpux/gate.S @@ -20,7 +20,7 @@ .import hpux_call_table .import hpux_syscall_exit,code - .align 4096 + .align PAGE_SIZE ENTRY(hpux_gateway_page) nop #ifdef CONFIG_64BIT @@ -103,5 +103,5 @@ syscall_nosys: ldo -ENOSYS(%r0),%r28 ENDPROC(hpux_gateway_page) - .align 4096 + .align PAGE_SIZE ENTRY(end_hpux_gateway_page) diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index d3b7917a87c..eaa79bc14d9 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -290,9 +290,6 @@ int main(void) DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE); DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT); DEFINE(ASM_PT_INITIAL, PT_INITIAL); - DEFINE(ASM_PAGE_SIZE, PAGE_SIZE); - DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64); - DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128); BLANK(); DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip)); DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space)); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 42598abf457..111d47284ea 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -98,7 +98,6 @@ * The "get_stack" macros are responsible for determining the * kernel stack value. * - * For Faults: * If sr7 == 0 * Already using a kernel stack, so call the * get_stack_use_r30 macro to push a pt_regs structure @@ -110,26 +109,6 @@ * task pointer pointed to by cr30. Set the stack * pointer to point to the end of the task structure. * - * For Interrupts: - * If sr7 == 0 - * Already using a kernel stack, check to see if r30 - * is already pointing to the per processor interrupt - * stack. If it is, call the get_stack_use_r30 macro - * to push a pt_regs structure on the stack, and store - * registers there. Otherwise, call get_stack_use_cr31 - * to get a pointer to the base of the interrupt stack - * and push a pt_regs structure on that stack. - * else - * Need to set up a kernel stack, so call the - * get_stack_use_cr30 macro to set up a pointer - * to the pt_regs structure contained within the - * task pointer pointed to by cr30. Set the stack - * pointer to point to the end of the task structure. - * N.B: We don't use the interrupt stack for the - * first interrupt from userland, because signals/ - * resched's are processed when returning to userland, - * and we can sleep in those cases. - * * Note that we use shadowed registers for temps until * we can save %r26 and %r29. %r26 is used to preserve * %r8 (a shadowed register) which temporarily contained @@ -652,7 +631,7 @@ .text - .align 4096 + .align PAGE_SIZE ENTRY(fault_vector_20) /* First vector is invalid (0) */ @@ -904,7 +883,7 @@ ENDPROC(_switch_to) * */ - .align 4096 + .align PAGE_SIZE ENTRY(syscall_exit_rfi) mfctl %cr30,%r16 @@ -1086,23 +1065,13 @@ intr_do_preempt: intr_extint: CMPIB=,n 0,%r16,1f + get_stack_use_cr30 - b,n 3f + b,n 2f 1: -#if 0 /* Interrupt Stack support not working yet! */ - mfctl %cr31,%r1 - copy %r30,%r17 - /* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/ - DEPI 0,31,15,%r17 - CMPB=,n %r1,%r17,2f - get_stack_use_cr31 - b,n 3f -#endif -2: get_stack_use_r30 - -3: +2: save_specials %r29 virt_map save_general %r29 diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 9676c486bb6..a7b8859488b 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -95,7 +95,7 @@ $bss_loop: 1: stw %r3,0(%r4) - ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 + ldo (PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3 addib,> -1,%r1,1b #if PT_NLEVELS == 3 ldo ASM_PMD_ENTRY_SIZE(%r4),%r4 @@ -128,10 +128,6 @@ $pgt_fill_loop: /* And the stack pointer too */ ldo THREAD_SZ_ALGN(%r6),%sp - /* And the interrupt stack */ - load32 interrupt_stack,%r6 - mtctl %r6,%cr31 - #ifdef CONFIG_SMP /* Set the smp rendevous address into page zero. ** It would be safer to do this in init_smp_config() but diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S index 43b41df0b54..2cbf13b3ef1 100644 --- a/arch/parisc/kernel/hpmc.S +++ b/arch/parisc/kernel/hpmc.S @@ -55,13 +55,13 @@ * IODC requires 7K byte stack. That leaves 1K byte for os_hpmc. */ - .align 4096 + .align PAGE_SIZE hpmc_stack: .block 16384 #define HPMC_IODC_BUF_SIZE 0x8000 - .align 4096 + .align PAGE_SIZE hpmc_iodc_buf: .block HPMC_IODC_BUF_SIZE diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c index 446f98d3fd7..26198a074d6 100644 --- a/arch/parisc/kernel/init_task.c +++ b/arch/parisc/kernel/init_task.c @@ -49,7 +49,6 @@ EXPORT_SYMBOL(init_mm); * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */ -unsigned char interrupt_stack[ISTACK_SIZE] __attribute__ ((section("init_istack"), aligned(4096))); union thread_union init_thread_union __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 90b24087852..5901092e019 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -289,7 +289,7 @@ ENTRY(copy_user_page_asm) */ ldd 0(%r25), %r19 - ldi ASM_PAGE_SIZE_DIV128, %r1 + ldi (PAGE_SIZE / 128), %r1 ldw 64(%r25), %r0 /* prefetch 1 cacheline ahead */ ldw 128(%r25), %r0 /* prefetch 2 */ @@ -355,7 +355,7 @@ ENTRY(copy_user_page_asm) * use ldd/std on a 32 bit kernel. */ ldw 0(%r25), %r19 - ldi ASM_PAGE_SIZE_DIV64, %r1 + ldi (PAGE_SIZE / 64), %r1 1: ldw 4(%r25), %r20 @@ -553,7 +553,7 @@ ENTRY(__clear_user_page_asm) pdtlb 0(%r28) #ifdef CONFIG_64BIT - ldi ASM_PAGE_SIZE_DIV128, %r1 + ldi (PAGE_SIZE / 128), %r1 /* PREFETCH (Write) has not (yet) been proven to help here */ /* #define PREFETCHW_OP ldd 256(%0), %r0 */ @@ -578,7 +578,7 @@ ENTRY(__clear_user_page_asm) ldo 128(%r28), %r28 #else /* ! CONFIG_64BIT */ - ldi ASM_PAGE_SIZE_DIV64, %r1 + ldi (PAGE_SIZE / 64), %r1 1: stw %r0, 0(%r28) diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c index 7aca704e96f..671ee5b9950 100644 --- a/arch/parisc/kernel/parisc_ksyms.c +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -122,31 +122,9 @@ EXPORT_SYMBOL($$divI_12); EXPORT_SYMBOL($$divI_14); EXPORT_SYMBOL($$divI_15); -extern void __ashrdi3(void); -extern void __ashldi3(void); -extern void __lshrdi3(void); -extern void __muldi3(void); - -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__muldi3); - asmlinkage void * __canonicalize_funcptr_for_compare(void *); EXPORT_SYMBOL(__canonicalize_funcptr_for_compare); -#ifdef CONFIG_64BIT -extern void __divdi3(void); -extern void __udivdi3(void); -extern void __umoddi3(void); -extern void __moddi3(void); - -EXPORT_SYMBOL(__divdi3); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__moddi3); -#endif - #ifndef CONFIG_64BIT extern void $$dyncall(void); EXPORT_SYMBOL($$dyncall); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index 23c1388df1f..41f8e321e34 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -569,11 +569,10 @@ static void *fail_alloc_consistent(struct device *dev, size_t size, static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { - void *addr = NULL; + void *addr; - /* rely on kmalloc to be cacheline aligned */ - addr = kmalloc(size, flag); - if(addr) + addr = (void *)__get_free_pages(flag, get_order(size)); + if (addr) *dma_handle = (dma_addr_t)virt_to_phys(addr); return addr; @@ -582,7 +581,7 @@ static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size, static void pa11_dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, dma_addr_t iova) { - kfree(vaddr); + free_pages((unsigned long)vaddr, get_order(size)); return; } diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c index 563df0072de..507d0ac99f6 100644 --- a/arch/parisc/kernel/pci.c +++ b/arch/parisc/kernel/pci.c @@ -194,37 +194,13 @@ void __init pcibios_init_bus(struct pci_bus *bus) pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl); } - -/* KLUGE: Link the child and parent resources - generic PCI didn't */ -static void -pcibios_link_hba_resources( struct resource *hba_res, struct resource *r) -{ - if (!r->parent) { - printk(KERN_EMERG "PCI: resource not parented! [%p-%p]\n", - (void*) r->start, (void*) r->end); - r->parent = hba_res; - - /* reverse link is harder *sigh* */ - if (r->parent->child) { - if (r->parent->sibling) { - struct resource *next = r->parent->sibling; - while (next->sibling) - next = next->sibling; - next->sibling = r; - } else { - r->parent->sibling = r; - } - } else - r->parent->child = r; - } -} - /* called by drivers/pci/setup-bus.c:pci_setup_bridge(). */ void __devinit pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { - struct pci_bus *bus = dev->bus; - struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data); +#ifdef CONFIG_64BIT + struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data); +#endif if (res->flags & IORESOURCE_IO) { /* @@ -243,23 +219,15 @@ void __devinit pcibios_resource_to_bus(struct pci_dev *dev, } DBG_RES("pcibios_resource_to_bus(%02x %s [%lx,%lx])\n", - bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM", + dev->bus->number, res->flags & IORESOURCE_IO ? "IO" : "MEM", region->start, region->end); - - /* KLUGE ALERT - ** if this resource isn't linked to a "parent", then it seems - ** to be a child of the HBA - lets link it in. - */ - pcibios_link_hba_resources(&hba->io_space, bus->resource[0]); - pcibios_link_hba_resources(&hba->lmmio_space, bus->resource[1]); } void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region) { #ifdef CONFIG_64BIT - struct pci_bus *bus = dev->bus; - struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data); + struct pci_hba_data *hba = HBA_DATA(dev->bus->bridge->platform_data); #endif if (res->flags & IORESOURCE_MEM) { diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 549f5484342..370086fb833 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -82,7 +82,12 @@ static int __cpuinit processor_probe(struct parisc_device *dev) unsigned long cpuid; struct cpuinfo_parisc *p; -#ifndef CONFIG_SMP +#ifdef CONFIG_SMP + if (num_online_cpus() >= NR_CPUS) { + printk(KERN_INFO "num_online_cpus() >= NR_CPUS\n"); + return 1; + } +#else if (boot_cpu_data.cpu_count > 0) { printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n"); return 1; diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index d7bc7bb42c9..85fc7754ec2 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -432,22 +432,10 @@ smp_cpu_init(int cpunum) void __init smp_callin(void) { int slave_id = cpu_now_booting; -#if 0 - void *istack; -#endif smp_cpu_init(slave_id); preempt_disable(); -#if 0 /* NOT WORKING YET - see entry.S */ - istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER); - if (istack == NULL) { - printk(KERN_CRIT "Failed to allocate interrupt stack for cpu %d\n",slave_id); - BUG(); - } - mtctl(istack,31); -#endif - flush_cache_all_local(); /* start with known state */ flush_tlb_all_local(NULL); diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index 2989c6682bf..50bbf33ee00 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -473,3 +473,10 @@ long sys32_lookup_dcookie(u32 cookie_high, u32 cookie_low, char __user *buf, return sys_lookup_dcookie((u64)cookie_high << 32 | cookie_low, buf, len); } + +asmlinkage long compat_sys_fallocate(int fd, int mode, u32 offhi, u32 offlo, + u32 lenhi, u32 lenlo) +{ + return sys_fallocate(fd, mode, ((loff_t)offhi << 32) | offlo, + ((loff_t)lenhi << 32) | lenlo); +} diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 56f6231cb86..69b6eebc466 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -10,6 +10,7 @@ #include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/errno.h> +#include <asm/page.h> #include <asm/psw.h> #include <asm/thread_info.h> #include <asm/assembly.h> @@ -38,7 +39,7 @@ * pointers. */ - .align ASM_PAGE_SIZE + .align PAGE_SIZE ENTRY(linux_gateway_page) /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */ @@ -597,7 +598,7 @@ cas_action: /* Make sure nothing else is placed on this page */ - .align ASM_PAGE_SIZE + .align PAGE_SIZE END(linux_gateway_page) ENTRY(end_linux_gateway_page) @@ -608,7 +609,7 @@ ENTRY(end_linux_gateway_page) .section .rodata,"a" - .align ASM_PAGE_SIZE + .align PAGE_SIZE /* Light-weight-syscall table */ /* Start of lws table. */ ENTRY(lws_table) @@ -617,13 +618,13 @@ ENTRY(lws_table) END(lws_table) /* End of lws table */ - .align ASM_PAGE_SIZE + .align PAGE_SIZE ENTRY(sys_call_table) #include "syscall_table.S" END(sys_call_table) #ifdef CONFIG_64BIT - .align ASM_PAGE_SIZE + .align PAGE_SIZE ENTRY(sys_call_table64) #define SYSCALL_TABLE_64BIT #include "syscall_table.S" @@ -636,7 +637,7 @@ END(sys_call_table64) will use this set of locks */ .section .data - .align 4096 + .align PAGE_SIZE ENTRY(lws_lock_start) /* lws locks */ .align 16 diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 2540786a970..117438e9eb2 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -403,6 +403,7 @@ ENTRY_COMP(signalfd) ENTRY_COMP(timerfd) ENTRY_SAME(eventfd) + ENTRY_COMP(fallocate) /* 305 */ /* Nothing yet */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 8b3062a5c81..24be86bba94 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -189,16 +189,14 @@ static struct clocksource clocksource_cr16 = { #ifdef CONFIG_SMP int update_cr16_clocksource(void) { - int change = 0; - /* since the cr16 cycle counters are not synchronized across CPUs, we'll check if we should switch to a safe clocksource: */ if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) { clocksource_change_rating(&clocksource_cr16, 0); - change = 1; + return 1; } - return change; + return 0; } #else int update_cr16_clocksource(void) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index cf780cb3b91..701b2d2d888 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -209,8 +209,8 @@ static int unwind_init(void) static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int frame_size) { - void handle_interruption(int, struct pt_regs *); - static unsigned long *hi = (unsigned long)&handle_interruption; + extern void handle_interruption(int, struct pt_regs *); + static unsigned long *hi = (unsigned long *)&handle_interruption; if (pc == get_func_addr(hi)) { struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN); diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index ee7a16eb6fd..40d0ff9b81a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -46,168 +46,211 @@ jiffies = jiffies_64; #endif SECTIONS { + . = KERNEL_BINARY_TEXT_START; - . = KERNEL_BINARY_TEXT_START; - - _text = .; /* Text and read-only data */ - .text ALIGN(16) : { - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - *(.text.do_softirq) - *(.text.sys_exit) - *(.text.do_sigaltstack) - *(.text.do_fork) - *(.text.*) - *(.fixup) - *(.lock.text) /* out-of-line lock text */ - *(.gnu.warning) + _text = .; /* Text and read-only data */ + .text ALIGN(16) : { + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + *(.text.do_softirq) + *(.text.sys_exit) + *(.text.do_sigaltstack) + *(.text.do_fork) + *(.text.*) + *(.fixup) + *(.lock.text) /* out-of-line lock text */ + *(.gnu.warning) } = 0 + /* End of text section */ + _etext = .; - _etext = .; /* End of text section */ + RODATA + BUG_TABLE - RODATA - - BUG_TABLE - - /* writeable */ - . = ALIGN(ASM_PAGE_SIZE); /* Make sure this is page aligned so - that we can properly leave these - as writable */ - data_start = .; - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; + /* writeable */ + /* Make sure this is page aligned so + * that we can properly leave these + * as writable + */ + . = ALIGN(PAGE_SIZE); + data_start = .; + . = ALIGN(16); + /* Exception table */ + __ex_table : { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } - NOTES + NOTES - __start___unwind = .; /* unwind info */ - .PARISC.unwind : { *(.PARISC.unwind) } - __stop___unwind = .; + /* unwind info */ + .PARISC.unwind : { + __start___unwind = .; + *(.PARISC.unwind) + __stop___unwind = .; + } - /* rarely changed data like cpu maps */ - . = ALIGN(16); - .data.read_mostly : { *(.data.read_mostly) } + /* rarely changed data like cpu maps */ + . = ALIGN(16); + .data.read_mostly : { + *(.data.read_mostly) + } - . = ALIGN(L1_CACHE_BYTES); - .data : { /* Data */ - DATA_DATA - CONSTRUCTORS + . = ALIGN(L1_CACHE_BYTES); + /* Data */ + .data : { + DATA_DATA + CONSTRUCTORS } - . = ALIGN(L1_CACHE_BYTES); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + . = ALIGN(L1_CACHE_BYTES); + .data.cacheline_aligned : { + *(.data.cacheline_aligned) + } - /* PA-RISC locks requires 16-byte alignment */ - . = ALIGN(16); - .data.lock_aligned : { *(.data.lock_aligned) } + /* PA-RISC locks requires 16-byte alignment */ + . = ALIGN(16); + .data.lock_aligned : { + *(.data.lock_aligned) + } - . = ALIGN(ASM_PAGE_SIZE); - /* nosave data is really only used for software suspend...it's here - * just in case we ever implement it */ - __nosave_begin = .; - .data_nosave : { *(.data.nosave) } - . = ALIGN(ASM_PAGE_SIZE); - __nosave_end = .; + /* nosave data is really only used for software suspend...it's here + * just in case we ever implement it + */ + . = ALIGN(PAGE_SIZE); + __nosave_begin = .; + .data_nosave : { + *(.data.nosave) + } + . = ALIGN(PAGE_SIZE); + __nosave_end = .; - _edata = .; /* End of data section */ + /* End of data section */ + _edata = .; - __bss_start = .; /* BSS */ - /* page table entries need to be PAGE_SIZE aligned */ - . = ALIGN(ASM_PAGE_SIZE); - .data.vmpages : { - *(.data.vm0.pmd) - *(.data.vm0.pgd) - *(.data.vm0.pte) + /* BSS */ + __bss_start = .; + /* page table entries need to be PAGE_SIZE aligned */ + . = ALIGN(PAGE_SIZE); + .data.vmpages : { + *(.data.vm0.pmd) + *(.data.vm0.pgd) + *(.data.vm0.pte) } - .bss : { *(.bss) *(COMMON) } - __bss_stop = .; - + .bss : { + *(.bss) + *(COMMON) + } + __bss_stop = .; - /* assembler code expects init_task to be 16k aligned */ - . = ALIGN(16384); /* init_task */ - .data.init_task : { *(.data.init_task) } - /* The interrupt stack is currently partially coded, but not yet - * implemented */ - . = ALIGN(16384); - init_istack : { *(init_istack) } + /* assembler code expects init_task to be 16k aligned */ + . = ALIGN(16384); + /* init_task */ + .data.init_task : { + *(.data.init_task) + } #ifdef CONFIG_64BIT - . = ALIGN(16); /* Linkage tables */ - .opd : { *(.opd) } PROVIDE (__gp = .); - .plt : { *(.plt) } - .dlt : { *(.dlt) } + . = ALIGN(16); + /* Linkage tables */ + .opd : { + *(.opd) + } PROVIDE (__gp = .); + .plt : { + *(.plt) + } + .dlt : { + *(.dlt) + } #endif - /* reserve space for interrupt stack by aligning __init* to 16k */ - . = ALIGN(16384); - __init_begin = .; - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } - .init.data : { *(.init.data) } - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; - __initcall_start = .; - .initcall.init : { - INITCALLS - } - __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } - __con_initcall_end = .; - SECURITY_INIT - /* alternate instruction replacement. This is a mechanism x86 uses - * to detect the CPU type and replace generic instruction sequences - * with CPU specific ones. We don't currently do this in PA, but - * it seems like a good idea... */ - . = ALIGN(4); - __alt_instructions = .; - .altinstructions : { *(.altinstructions) } - __alt_instructions_end = .; - .altinstr_replacement : { *(.altinstr_replacement) } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : { *(.exit.text) } - .exit.data : { *(.exit.data) } + /* reserve space for interrupt stack by aligning __init* to 16k */ + . = ALIGN(16384); + __init_begin = .; + .init.text : { + _sinittext = .; + *(.init.text) + _einittext = .; + } + .init.data : { + *(.init.data) + } + . = ALIGN(16); + .init.setup : { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + .initcall.init : { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + .con_initcall.init : { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + SECURITY_INIT + + /* alternate instruction replacement. This is a mechanism x86 uses + * to detect the CPU type and replace generic instruction sequences + * with CPU specific ones. We don't currently do this in PA, but + * it seems like a good idea... + */ + . = ALIGN(4); + .altinstructions : { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + .altinstr_replacement : { + *(.altinstr_replacement) + } + + /* .exit.text is discard at runtime, not link time, to deal with references + * from .altinstructions and .eh_frame + */ + .exit.text : { + *(.exit.text) + } + .exit.data : { + *(.exit.data) + } #ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(ASM_PAGE_SIZE); - __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } - __initramfs_end = .; + . = ALIGN(PAGE_SIZE); + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } #endif - PERCPU(ASM_PAGE_SIZE) + PERCPU(PAGE_SIZE) + . = ALIGN(PAGE_SIZE); + __init_end = .; + /* freed after init ends here */ + _end = . ; - . = ALIGN(ASM_PAGE_SIZE); - __init_end = .; - /* freed after init ends here */ - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) #ifdef CONFIG_64BIT - /* temporary hack until binutils is fixed to not emit these - for static binaries */ - *(.interp) - *(.dynsym) - *(.dynstr) - *(.dynamic) - *(.hash) - *(.gnu.hash) + /* temporary hack until binutils is fixed to not emit these + * for static binaries + */ + *(.interp) + *(.dynsym) + *(.dynstr) + *(.dynamic) + *(.hash) + *(.gnu.hash) #endif } - STABS_DEBUG - .note 0 : { *(.note) } - + STABS_DEBUG + .note 0 : { *(.note) } } diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile index 5f2e6904d14..7ce406c7daf 100644 --- a/arch/parisc/lib/Makefile +++ b/arch/parisc/lib/Makefile @@ -4,4 +4,4 @@ lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o -obj-y := iomap.o +obj-y := libgcc/ milli/ iomap.o diff --git a/arch/parisc/lib/libgcc/Makefile b/arch/parisc/lib/libgcc/Makefile new file mode 100644 index 00000000000..b67a85ad9c8 --- /dev/null +++ b/arch/parisc/lib/libgcc/Makefile @@ -0,0 +1,4 @@ +obj-y := __ashldi3.o __ashrdi3.o __clzsi2.o __divdi3.o __divsi3.o \ + __lshrdi3.o __moddi3.o __modsi3.o __udivdi3.o \ + __udivmoddi4.o __udivmodsi4.o __udivsi3.o \ + __umoddi3.o __umodsi3.o __muldi3.o __umulsidi3.o diff --git a/arch/parisc/lib/libgcc/__ashldi3.c b/arch/parisc/lib/libgcc/__ashldi3.c new file mode 100644 index 00000000000..a14a257abb2 --- /dev/null +++ b/arch/parisc/lib/libgcc/__ashldi3.c @@ -0,0 +1,19 @@ +#include "libgcc.h" + +u64 __ashldi3(u64 v, int cnt) +{ + int c = cnt & 31; + u32 vl = (u32) v; + u32 vh = (u32) (v >> 32); + + if (cnt & 32) { + vh = (vl << c); + vl = 0; + } else { + vh = (vh << c) + (vl >> (32 - c)); + vl = (vl << c); + } + + return ((u64) vh << 32) + vl; +} +EXPORT_SYMBOL(__ashldi3); diff --git a/arch/parisc/lib/libgcc/__ashrdi3.c b/arch/parisc/lib/libgcc/__ashrdi3.c new file mode 100644 index 00000000000..8636a5aa4f7 --- /dev/null +++ b/arch/parisc/lib/libgcc/__ashrdi3.c @@ -0,0 +1,19 @@ +#include "libgcc.h" + +u64 __ashrdi3(u64 v, int cnt) +{ + int c = cnt & 31; + u32 vl = (u32) v; + u32 vh = (u32) (v >> 32); + + if (cnt & 32) { + vl = ((s32) vh >> c); + vh = (s32) vh >> 31; + } else { + vl = (vl >> c) + (vh << (32 - c)); + vh = ((s32) vh >> c); + } + + return ((u64) vh << 32) + vl; +} +EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/parisc/lib/libgcc/__clzsi2.c b/arch/parisc/lib/libgcc/__clzsi2.c new file mode 100644 index 00000000000..a7aa2f55a9c --- /dev/null +++ b/arch/parisc/lib/libgcc/__clzsi2.c @@ -0,0 +1,30 @@ +#include "libgcc.h" + +u32 __clzsi2(u32 v) +{ + int p = 31; + + if (v & 0xffff0000) { + p -= 16; + v >>= 16; + } + if (v & 0xff00) { + p -= 8; + v >>= 8; + } + if (v & 0xf0) { + p -= 4; + v >>= 4; + } + if (v & 0xc) { + p -= 2; + v >>= 2; + } + if (v & 0x2) { + p -= 1; + v >>= 1; + } + + return p; +} +EXPORT_SYMBOL(__clzsi2); diff --git a/arch/parisc/lib/libgcc/__divdi3.c b/arch/parisc/lib/libgcc/__divdi3.c new file mode 100644 index 00000000000..f23c6fe2838 --- /dev/null +++ b/arch/parisc/lib/libgcc/__divdi3.c @@ -0,0 +1,23 @@ +#include "libgcc.h" + +s64 __divdi3(s64 num, s64 den) +{ + int minus = 0; + s64 v; + + if (num < 0) { + num = -num; + minus = 1; + } + if (den < 0) { + den = -den; + minus ^= 1; + } + + v = __udivmoddi4(num, den, NULL); + if (minus) + v = -v; + + return v; +} +EXPORT_SYMBOL(__divdi3); diff --git a/arch/parisc/lib/libgcc/__divsi3.c b/arch/parisc/lib/libgcc/__divsi3.c new file mode 100644 index 00000000000..730fb530680 --- /dev/null +++ b/arch/parisc/lib/libgcc/__divsi3.c @@ -0,0 +1,23 @@ +#include "libgcc.h" + +s32 __divsi3(s32 num, s32 den) +{ + int minus = 0; + s32 v; + + if (num < 0) { + num = -num; + minus = 1; + } + if (den < 0) { + den = -den; + minus ^= 1; + } + + v = __udivmodsi4(num, den, NULL); + if (minus) + v = -v; + + return v; +} +EXPORT_SYMBOL(__divsi3); diff --git a/arch/parisc/lib/libgcc/__lshrdi3.c b/arch/parisc/lib/libgcc/__lshrdi3.c new file mode 100644 index 00000000000..4a820708ec5 --- /dev/null +++ b/arch/parisc/lib/libgcc/__lshrdi3.c @@ -0,0 +1,19 @@ +#include "libgcc.h" + +u64 __lshrdi3(u64 v, int cnt) +{ + int c = cnt & 31; + u32 vl = (u32) v; + u32 vh = (u32) (v >> 32); + + if (cnt & 32) { + vl = (vh >> c); + vh = 0; + } else { + vl = (vl >> c) + (vh << (32 - c)); + vh = (vh >> c); + } + + return ((u64) vh << 32) + vl; +} +EXPORT_SYMBOL(__lshrdi3); diff --git a/arch/parisc/lib/libgcc/__moddi3.c b/arch/parisc/lib/libgcc/__moddi3.c new file mode 100644 index 00000000000..ed64bbafc98 --- /dev/null +++ b/arch/parisc/lib/libgcc/__moddi3.c @@ -0,0 +1,23 @@ +#include "libgcc.h" + +s64 __moddi3(s64 num, s64 den) +{ + int minus = 0; + s64 v; + + if (num < 0) { + num = -num; + minus = 1; + } + if (den < 0) { + den = -den; + minus ^= 1; + } + + (void)__udivmoddi4(num, den, (u64 *) & v); + if (minus) + v = -v; + + return v; +} +EXPORT_SYMBOL(__moddi3); diff --git a/arch/parisc/lib/libgcc/__modsi3.c b/arch/parisc/lib/libgcc/__modsi3.c new file mode 100644 index 00000000000..62f773efaee --- /dev/null +++ b/arch/parisc/lib/libgcc/__modsi3.c @@ -0,0 +1,23 @@ +#include "libgcc.h" + +s32 __modsi3(s32 num, s32 den) +{ + int minus = 0; + s32 v; + + if (num < 0) { + num = -num; + minus = 1; + } + if (den < 0) { + den = -den; + minus ^= 1; + } + + (void)__udivmodsi4(num, den, (u32 *) & v); + if (minus) + v = -v; + + return v; +} +EXPORT_SYMBOL(__modsi3); diff --git a/arch/parisc/lib/libgcc/__muldi3.c b/arch/parisc/lib/libgcc/__muldi3.c new file mode 100644 index 00000000000..3308abdd558 --- /dev/null +++ b/arch/parisc/lib/libgcc/__muldi3.c @@ -0,0 +1,22 @@ +#include "libgcc.h" + +union DWunion { + struct { + s32 high; + s32 low; + } s; + s64 ll; +}; + +s64 __muldi3(s64 u, s64 v) +{ + const union DWunion uu = { .ll = u }; + const union DWunion vv = { .ll = v }; + union DWunion w = { .ll = __umulsidi3(uu.s.low, vv.s.low) }; + + w.s.high += ((u32)uu.s.low * (u32)vv.s.high + + (u32)uu.s.high * (u32)vv.s.low); + + return w.ll; +} +EXPORT_SYMBOL(__muldi3); diff --git a/arch/parisc/lib/libgcc/__udivdi3.c b/arch/parisc/lib/libgcc/__udivdi3.c new file mode 100644 index 00000000000..740023d690f --- /dev/null +++ b/arch/parisc/lib/libgcc/__udivdi3.c @@ -0,0 +1,7 @@ +#include "libgcc.h" + +u64 __udivdi3(u64 num, u64 den) +{ + return __udivmoddi4(num, den, NULL); +} +EXPORT_SYMBOL(__udivdi3); diff --git a/arch/parisc/lib/libgcc/__udivmoddi4.c b/arch/parisc/lib/libgcc/__udivmoddi4.c new file mode 100644 index 00000000000..2df0caa5a7d --- /dev/null +++ b/arch/parisc/lib/libgcc/__udivmoddi4.c @@ -0,0 +1,31 @@ +#include "libgcc.h" + +u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p) +{ + u64 quot = 0, qbit = 1; + + if (den == 0) { + BUG(); + } + + /* Left-justify denominator and count shift */ + while ((s64) den >= 0) { + den <<= 1; + qbit <<= 1; + } + + while (qbit) { + if (den <= num) { + num -= den; + quot += qbit; + } + den >>= 1; + qbit >>= 1; + } + + if (rem_p) + *rem_p = num; + + return quot; +} +EXPORT_SYMBOL(__udivmoddi4); diff --git a/arch/parisc/lib/libgcc/__udivmodsi4.c b/arch/parisc/lib/libgcc/__udivmodsi4.c new file mode 100644 index 00000000000..2a2fc28b202 --- /dev/null +++ b/arch/parisc/lib/libgcc/__udivmodsi4.c @@ -0,0 +1,31 @@ +#include "libgcc.h" + +u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p) +{ + u32 quot = 0, qbit = 1; + + if (den == 0) { + BUG(); + } + + /* Left-justify denominator and count shift */ + while ((s32) den >= 0) { + den <<= 1; + qbit <<= 1; + } + + while (qbit) { + if (den <= num) { + num -= den; + quot += qbit; + } + den >>= 1; + qbit >>= 1; + } + + if (rem_p) + *rem_p = num; + + return quot; +} +EXPORT_SYMBOL(__udivmodsi4); diff --git a/arch/parisc/lib/libgcc/__udivsi3.c b/arch/parisc/lib/libgcc/__udivsi3.c new file mode 100644 index 00000000000..756a44164e9 --- /dev/null +++ b/arch/parisc/lib/libgcc/__udivsi3.c @@ -0,0 +1,7 @@ +#include "libgcc.h" + +u32 __udivsi3(u32 num, u32 den) +{ + return __udivmodsi4(num, den, NULL); +} +EXPORT_SYMBOL(__udivsi3); diff --git a/arch/parisc/lib/libgcc/__umoddi3.c b/arch/parisc/lib/libgcc/__umoddi3.c new file mode 100644 index 00000000000..ac744e948bc --- /dev/null +++ b/arch/parisc/lib/libgcc/__umoddi3.c @@ -0,0 +1,10 @@ +#include "libgcc.h" + +u64 __umoddi3(u64 num, u64 den) +{ + u64 v; + + (void)__udivmoddi4(num, den, &v); + return v; +} +EXPORT_SYMBOL(__umoddi3); diff --git a/arch/parisc/lib/libgcc/__umodsi3.c b/arch/parisc/lib/libgcc/__umodsi3.c new file mode 100644 index 00000000000..51f55aa89f9 --- /dev/null +++ b/arch/parisc/lib/libgcc/__umodsi3.c @@ -0,0 +1,10 @@ +#include "libgcc.h" + +u32 __umodsi3(u32 num, u32 den) +{ + u32 v; + + (void)__udivmodsi4(num, den, &v); + return v; +} +EXPORT_SYMBOL(__umodsi3); diff --git a/arch/parisc/lib/libgcc/__umulsidi3.c b/arch/parisc/lib/libgcc/__umulsidi3.c new file mode 100644 index 00000000000..396f669164d --- /dev/null +++ b/arch/parisc/lib/libgcc/__umulsidi3.c @@ -0,0 +1,46 @@ +#include "libgcc.h" + +#define __ll_B ((u32) 1 << (32 / 2)) +#define __ll_lowpart(t) ((u32) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((u32) (t) >> 16) + +#define umul_ppmm(w1, w0, u, v) \ + do { \ + u32 __x0, __x1, __x2, __x3; \ + u16 __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (u32) __ul * __vl; \ + __x1 = (u32) __ul * __vh; \ + __x2 = (u32) __uh * __vl; \ + __x3 = (u32) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ + } while (0) + +union DWunion { + struct { + s32 high; + s32 low; + } s; + s64 ll; +}; + +u64 __umulsidi3(u32 u, u32 v) +{ + union DWunion __w; + + umul_ppmm(__w.s.high, __w.s.low, u, v); + + return __w.ll; +} diff --git a/arch/parisc/lib/libgcc/libgcc.h b/arch/parisc/lib/libgcc/libgcc.h new file mode 100644 index 00000000000..5a6f7a510fb --- /dev/null +++ b/arch/parisc/lib/libgcc/libgcc.h @@ -0,0 +1,32 @@ +#ifndef _PA_LIBGCC_H_ +#define _PA_LIBGCC_H_ + +#include <linux/types.h> +#include <linux/module.h> + +/* Cribbed from klibc/libgcc/ */ +u64 __ashldi3(u64 v, int cnt); +u64 __ashrdi3(u64 v, int cnt); + +u32 __clzsi2(u32 v); + +s64 __divdi3(s64 num, s64 den); +s32 __divsi3(s32 num, s32 den); + +u64 __lshrdi3(u64 v, int cnt); + +s64 __moddi3(s64 num, s64 den); +s32 __modsi3(s32 num, s32 den); + +u64 __udivdi3(u64 num, u64 den); +u32 __udivsi3(u32 num, u32 den); + +u64 __udivmoddi4(u64 num, u64 den, u64 * rem_p); +u32 __udivmodsi4(u32 num, u32 den, u32 * rem_p); + +u64 __umulsidi3(u32 u, u32 v); + +u64 __umoddi3(u64 num, u64 den); +u32 __umodsi3(u32 num, u32 den); + +#endif /*_PA_LIBGCC_H_*/ diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index 2c43ebe99a9..d22042d3310 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -139,12 +139,12 @@ DECLARE_PER_CPU(struct exception_data, exception_data); #define stw(_s,_t,_o,_a,_e) def_store_insn(stw,"r",_s,_t,_o,_a,_e) #ifdef CONFIG_PREFETCH -extern inline void prefetch_src(const void *addr) +static inline void prefetch_src(const void *addr) { __asm__("ldw 0(" s_space ",%0), %%r0" : : "r" (addr)); } -extern inline void prefetch_dst(const void *addr) +static inline void prefetch_dst(const void *addr) { __asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr)); } diff --git a/arch/parisc/lib/milli/Makefile b/arch/parisc/lib/milli/Makefile new file mode 100644 index 00000000000..9b24e9b1f3c --- /dev/null +++ b/arch/parisc/lib/milli/Makefile @@ -0,0 +1 @@ +obj-y := dyncall.o divI.o divU.o remI.o remU.o div_const.o mulI.o diff --git a/arch/parisc/lib/milli/divI.S b/arch/parisc/lib/milli/divI.S new file mode 100644 index 00000000000..ac106b7b6f2 --- /dev/null +++ b/arch/parisc/lib/milli/divI.S @@ -0,0 +1,254 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_divI +/* ROUTINES: $$divI, $$divoI + + Single precision divide for signed binary integers. + + The quotient is truncated towards zero. + The sign of the quotient is the XOR of the signs of the dividend and + divisor. + Divide by zero is trapped. + Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: + . divisor is zero (traps with ADDIT,= 0,25,0) + . dividend==-2**31 and divisor==-1 and routine is $$divoI + . (traps with ADDO 26,25,0) + . Changes memory at the following places: + . NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Branchs to other millicode routines using BE + . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15 + . + . For selected divisors, calls a divide by constant routine written by + . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13. + . + . The only overflow case is -2**31 divided by -1. + . Both routines return -2**31 but only $$divoI traps. */ + +RDEFINE(temp,r1) +RDEFINE(retreg,ret1) /* r29 */ +RDEFINE(temp1,arg0) + SUBSPA_MILLI_DIV + ATTR_MILLI + .import $$divI_2,millicode + .import $$divI_3,millicode + .import $$divI_4,millicode + .import $$divI_5,millicode + .import $$divI_6,millicode + .import $$divI_7,millicode + .import $$divI_8,millicode + .import $$divI_9,millicode + .import $$divI_10,millicode + .import $$divI_12,millicode + .import $$divI_14,millicode + .import $$divI_15,millicode + .export $$divI,millicode + .export $$divoI,millicode + .proc + .callinfo millicode + .entry +GSYM($$divoI) + comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */ +GSYM($$divI) + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */ + addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */ + b,n LREF(neg_denom) +LSYM(pow2) + addi,>= 0,arg0,retreg /* if numerator is negative, add the */ + add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */ + extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */ + extrs retreg,15,16,retreg /* retreg = retreg >> 16 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */ + ldi 0xcc,temp1 /* setup 0xcc in temp1 */ + extru,= arg1,23,8,temp /* test denominator with 0xff00 */ + extrs retreg,23,24,retreg /* retreg = retreg >> 8 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */ + ldi 0xaa,temp /* setup 0xaa in temp */ + extru,= arg1,27,4,r0 /* test denominator with 0xf0 */ + extrs retreg,27,28,retreg /* retreg = retreg >> 4 */ + and,= arg1,temp1,r0 /* test denominator with 0xcc */ + extrs retreg,29,30,retreg /* retreg = retreg >> 2 */ + and,= arg1,temp,r0 /* test denominator with 0xaa */ + extrs retreg,30,31,retreg /* retreg = retreg >> 1 */ + MILLIRETN +LSYM(neg_denom) + addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */ + b,n LREF(regular_seq) + sub r0,arg1,temp /* make denominator positive */ + comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */ + ldo -1(temp),retreg /* is there at most one bit set ? */ + and,= temp,retreg,r0 /* if so, the denominator is power of 2 */ + b,n LREF(regular_seq) + sub r0,arg0,retreg /* negate numerator */ + comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */ + copy retreg,arg0 /* set up arg0, arg1 and temp */ + copy temp,arg1 /* before branching to pow2 */ + b LREF(pow2) + ldo -1(arg1),temp +LSYM(regular_seq) + comib,>>=,n 15,arg1,LREF(small_divisor) + add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */ +LSYM(normal) + subi 0,retreg,retreg /* make it positive */ + sub 0,arg1,temp /* clear carry, */ + /* negate the divisor */ + ds 0,temp,0 /* set V-bit to the comple- */ + /* ment of the divisor sign */ + add retreg,retreg,retreg /* shift msb bit into carry */ + ds r0,arg1,temp /* 1st divide step, if no carry */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 32nd divide step, */ + addc retreg,retreg,retreg /* shift last retreg bit into retreg */ + xor,>= arg0,arg1,0 /* get correct sign of quotient */ + sub 0,retreg,retreg /* based on operand signs */ + MILLIRETN + nop + +LSYM(small_divisor) + +#if defined(CONFIG_64BIT) +/* Clear the upper 32 bits of the arg1 register. We are working with */ +/* small divisors (and 32-bit integers) We must not be mislead */ +/* by "1" bits left in the upper 32 bits. */ + depd %r0,31,32,%r25 +#endif + blr,n arg1,r0 + nop +/* table for divisor == 0,1, ... ,15 */ + addit,= 0,arg1,r0 /* trap if divisor == 0 */ + nop + MILLIRET /* divisor == 1 */ + copy arg0,retreg + MILLI_BEN($$divI_2) /* divisor == 2 */ + nop + MILLI_BEN($$divI_3) /* divisor == 3 */ + nop + MILLI_BEN($$divI_4) /* divisor == 4 */ + nop + MILLI_BEN($$divI_5) /* divisor == 5 */ + nop + MILLI_BEN($$divI_6) /* divisor == 6 */ + nop + MILLI_BEN($$divI_7) /* divisor == 7 */ + nop + MILLI_BEN($$divI_8) /* divisor == 8 */ + nop + MILLI_BEN($$divI_9) /* divisor == 9 */ + nop + MILLI_BEN($$divI_10) /* divisor == 10 */ + nop + b LREF(normal) /* divisor == 11 */ + add,>= 0,arg0,retreg + MILLI_BEN($$divI_12) /* divisor == 12 */ + nop + b LREF(normal) /* divisor == 13 */ + add,>= 0,arg0,retreg + MILLI_BEN($$divI_14) /* divisor == 14 */ + nop + MILLI_BEN($$divI_15) /* divisor == 15 */ + nop + +LSYM(negative1) + sub 0,arg0,retreg /* result is negation of dividend */ + MILLIRET + addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */ + .exit + .procend + .end +#endif diff --git a/arch/parisc/lib/milli/divU.S b/arch/parisc/lib/milli/divU.S new file mode 100644 index 00000000000..9287fe2546f --- /dev/null +++ b/arch/parisc/lib/milli/divU.S @@ -0,0 +1,235 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_divU +/* ROUTINE: $$divU + . + . Single precision divide for unsigned integers. + . + . Quotient is truncated towards zero. + . Traps on divide by zero. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: + . divisor is zero + . Changes memory at the following places: + . NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Branchs to other millicode routines using BE: + . $$divU_# for 3,5,6,7,9,10,12,14,15 + . + . For selected small divisors calls the special divide by constant + . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */ + +RDEFINE(temp,r1) +RDEFINE(retreg,ret1) /* r29 */ +RDEFINE(temp1,arg0) + SUBSPA_MILLI_DIV + ATTR_MILLI + .export $$divU,millicode + .import $$divU_3,millicode + .import $$divU_5,millicode + .import $$divU_6,millicode + .import $$divU_7,millicode + .import $$divU_9,millicode + .import $$divU_10,millicode + .import $$divU_12,millicode + .import $$divU_14,millicode + .import $$divU_15,millicode + .proc + .callinfo millicode + .entry +GSYM($$divU) +/* The subtract is not nullified since it does no harm and can be used + by the two cases that branch back to "normal". */ + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,= arg1,temp,r0 /* if so, denominator is power of 2 */ + b LREF(regular_seq) + addit,= 0,arg1,0 /* trap for zero dvr */ + copy arg0,retreg + extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */ + extru retreg,15,16,retreg /* retreg = retreg >> 16 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */ + ldi 0xcc,temp1 /* setup 0xcc in temp1 */ + extru,= arg1,23,8,temp /* test denominator with 0xff00 */ + extru retreg,23,24,retreg /* retreg = retreg >> 8 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */ + ldi 0xaa,temp /* setup 0xaa in temp */ + extru,= arg1,27,4,r0 /* test denominator with 0xf0 */ + extru retreg,27,28,retreg /* retreg = retreg >> 4 */ + and,= arg1,temp1,r0 /* test denominator with 0xcc */ + extru retreg,29,30,retreg /* retreg = retreg >> 2 */ + and,= arg1,temp,r0 /* test denominator with 0xaa */ + extru retreg,30,31,retreg /* retreg = retreg >> 1 */ + MILLIRETN + nop +LSYM(regular_seq) + comib,>= 15,arg1,LREF(special_divisor) + subi 0,arg1,temp /* clear carry, negate the divisor */ + ds r0,temp,r0 /* set V-bit to 1 */ +LSYM(normal) + add arg0,arg0,retreg /* shift msb bit into carry */ + ds r0,arg1,temp /* 1st divide step, if no carry */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 32nd divide step, */ + MILLIRET + addc retreg,retreg,retreg /* shift last retreg bit into retreg */ + +/* Handle the cases where divisor is a small constant or has high bit on. */ +LSYM(special_divisor) +/* blr arg1,r0 */ +/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */ + +/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from + generating such a blr, comib sequence. A problem in nullification. So I + rewrote this code. */ + +#if defined(CONFIG_64BIT) +/* Clear the upper 32 bits of the arg1 register. We are working with + small divisors (and 32-bit unsigned integers) We must not be mislead + by "1" bits left in the upper 32 bits. */ + depd %r0,31,32,%r25 +#endif + comib,> 0,arg1,LREF(big_divisor) + nop + blr arg1,r0 + nop + +LSYM(zero_divisor) /* this label is here to provide external visibility */ + addit,= 0,arg1,0 /* trap for zero dvr */ + nop + MILLIRET /* divisor == 1 */ + copy arg0,retreg + MILLIRET /* divisor == 2 */ + extru arg0,30,31,retreg + MILLI_BEN($$divU_3) /* divisor == 3 */ + nop + MILLIRET /* divisor == 4 */ + extru arg0,29,30,retreg + MILLI_BEN($$divU_5) /* divisor == 5 */ + nop + MILLI_BEN($$divU_6) /* divisor == 6 */ + nop + MILLI_BEN($$divU_7) /* divisor == 7 */ + nop + MILLIRET /* divisor == 8 */ + extru arg0,28,29,retreg + MILLI_BEN($$divU_9) /* divisor == 9 */ + nop + MILLI_BEN($$divU_10) /* divisor == 10 */ + nop + b LREF(normal) /* divisor == 11 */ + ds r0,temp,r0 /* set V-bit to 1 */ + MILLI_BEN($$divU_12) /* divisor == 12 */ + nop + b LREF(normal) /* divisor == 13 */ + ds r0,temp,r0 /* set V-bit to 1 */ + MILLI_BEN($$divU_14) /* divisor == 14 */ + nop + MILLI_BEN($$divU_15) /* divisor == 15 */ + nop + +/* Handle the case where the high bit is on in the divisor. + Compute: if( dividend>=divisor) quotient=1; else quotient=0; + Note: dividend>==divisor iff dividend-divisor does not borrow + and not borrow iff carry. */ +LSYM(big_divisor) + sub arg0,arg1,r0 + MILLIRET + addc r0,r0,retreg + .exit + .procend + .end +#endif diff --git a/arch/parisc/lib/milli/div_const.S b/arch/parisc/lib/milli/div_const.S new file mode 100644 index 00000000000..dd660076e94 --- /dev/null +++ b/arch/parisc/lib/milli/div_const.S @@ -0,0 +1,682 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_div_const +/* ROUTINE: $$divI_2 + . $$divI_3 $$divU_3 + . $$divI_4 + . $$divI_5 $$divU_5 + . $$divI_6 $$divU_6 + . $$divI_7 $$divU_7 + . $$divI_8 + . $$divI_9 $$divU_9 + . $$divI_10 $$divU_10 + . + . $$divI_12 $$divU_12 + . + . $$divI_14 $$divU_14 + . $$divI_15 $$divU_15 + . $$divI_16 + . $$divI_17 $$divU_17 + . + . Divide by selected constants for single precision binary integers. + + INPUT REGISTERS: + . arg0 == dividend + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: NONE + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Calls other millicode routines using mrp: NONE + . Calls other millicode routines: NONE */ + + +/* TRUNCATED DIVISION BY SMALL INTEGERS + + We are interested in q(x) = floor(x/y), where x >= 0 and y > 0 + (with y fixed). + + Let a = floor(z/y), for some choice of z. Note that z will be + chosen so that division by z is cheap. + + Let r be the remainder(z/y). In other words, r = z - ay. + + Now, our method is to choose a value for b such that + + q'(x) = floor((ax+b)/z) + + is equal to q(x) over as large a range of x as possible. If the + two are equal over a sufficiently large range, and if it is easy to + form the product (ax), and it is easy to divide by z, then we can + perform the division much faster than the general division algorithm. + + So, we want the following to be true: + + . For x in the following range: + . + . ky <= x < (k+1)y + . + . implies that + . + . k <= (ax+b)/z < (k+1) + + We want to determine b such that this is true for all k in the + range {0..K} for some maximum K. + + Since (ax+b) is an increasing function of x, we can take each + bound separately to determine the "best" value for b. + + (ax+b)/z < (k+1) implies + + (a((k+1)y-1)+b < (k+1)z implies + + b < a + (k+1)(z-ay) implies + + b < a + (k+1)r + + This needs to be true for all k in the range {0..K}. In + particular, it is true for k = 0 and this leads to a maximum + acceptable value for b. + + b < a+r or b <= a+r-1 + + Taking the other bound, we have + + k <= (ax+b)/z implies + + k <= (aky+b)/z implies + + k(z-ay) <= b implies + + kr <= b + + Clearly, the largest range for k will be achieved by maximizing b, + when r is not zero. When r is zero, then the simplest choice for b + is 0. When r is not 0, set + + . b = a+r-1 + + Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y) + for all x in the range: + + . 0 <= x < (K+1)y + + We need to determine what K is. Of our two bounds, + + . b < a+(k+1)r is satisfied for all k >= 0, by construction. + + The other bound is + + . kr <= b + + This is always true if r = 0. If r is not 0 (the usual case), then + K = floor((a+r-1)/r), is the maximum value for k. + + Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct + answer for q(x) = floor(x/y) when x is in the range + + (0,(K+1)y-1) K = floor((a+r-1)/r) + + To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that + the formula for q'(x) yields the correct value of q(x) for all x + representable by a single word in HPPA. + + We are also constrained in that computing the product (ax), adding + b, and dividing by z must all be done quickly, otherwise we will be + better off going through the general algorithm using the DS + instruction, which uses approximately 70 cycles. + + For each y, there is a choice of z which satisfies the constraints + for (K+1)y >= 2**32. We may not, however, be able to satisfy the + timing constraints for arbitrary y. It seems that z being equal to + a power of 2 or a power of 2 minus 1 is as good as we can do, since + it minimizes the time to do division by z. We want the choice of z + to also result in a value for (a) that minimizes the computation of + the product (ax). This is best achieved if (a) has a regular bit + pattern (so the multiplication can be done with shifts and adds). + The value of (a) also needs to be less than 2**32 so the product is + always guaranteed to fit in 2 words. + + In actual practice, the following should be done: + + 1) For negative x, you should take the absolute value and remember + . the fact so that the result can be negated. This obviously does + . not apply in the unsigned case. + 2) For even y, you should factor out the power of 2 that divides y + . and divide x by it. You can then proceed by dividing by the + . odd factor of y. + + Here is a table of some odd values of y, and corresponding choices + for z which are "good". + + y z r a (hex) max x (hex) + + 3 2**32 1 55555555 100000001 + 5 2**32 1 33333333 100000003 + 7 2**24-1 0 249249 (infinite) + 9 2**24-1 0 1c71c7 (infinite) + 11 2**20-1 0 1745d (infinite) + 13 2**24-1 0 13b13b (infinite) + 15 2**32 1 11111111 10000000d + 17 2**32 1 f0f0f0f 10000000f + + If r is 1, then b = a+r-1 = a. This simplifies the computation + of (ax+b), since you can compute (x+1)(a) instead. If r is 0, + then b = 0 is ok to use which simplifies (ax+b). + + The bit patterns for 55555555, 33333333, and 11111111 are obviously + very regular. The bit patterns for the other values of a above are: + + y (hex) (binary) + + 7 249249 001001001001001001001001 << regular >> + 9 1c71c7 000111000111000111000111 << regular >> + 11 1745d 000000010111010001011101 << irregular >> + 13 13b13b 000100111011000100111011 << irregular >> + + The bit patterns for (a) corresponding to (y) of 11 and 13 may be + too irregular to warrant using this method. + + When z is a power of 2 minus 1, then the division by z is slightly + more complicated, involving an iterative solution. + + The code presented here solves division by 1 through 17, except for + 11 and 13. There are algorithms for both signed and unsigned + quantities given. + + TIMINGS (cycles) + + divisor positive negative unsigned + + . 1 2 2 2 + . 2 4 4 2 + . 3 19 21 19 + . 4 4 4 2 + . 5 18 22 19 + . 6 19 22 19 + . 8 4 4 2 + . 10 18 19 17 + . 12 18 20 18 + . 15 16 18 16 + . 16 4 4 2 + . 17 16 18 16 + + Now, the algorithm for 7, 9, and 14 is an iterative one. That is, + a loop body is executed until the tentative quotient is 0. The + number of times the loop body is executed varies depending on the + dividend, but is never more than two times. If the dividend is + less than the divisor, then the loop body is not executed at all. + Each iteration adds 4 cycles to the timings. + + divisor positive negative unsigned + + . 7 19+4n 20+4n 20+4n n = number of iterations + . 9 21+4n 22+4n 21+4n + . 14 21+4n 22+4n 20+4n + + To give an idea of how the number of iterations varies, here is a + table of dividend versus number of iterations when dividing by 7. + + smallest largest required + dividend dividend iterations + + . 0 6 0 + . 7 0x6ffffff 1 + 0x1000006 0xffffffff 2 + + There is some overlap in the range of numbers requiring 1 and 2 + iterations. */ + +RDEFINE(t2,r1) +RDEFINE(x2,arg0) /* r26 */ +RDEFINE(t1,arg1) /* r25 */ +RDEFINE(x1,ret1) /* r29 */ + + SUBSPA_MILLI_DIV + ATTR_MILLI + + .proc + .callinfo millicode + .entry +/* NONE of these routines require a stack frame + ALL of these routines are unwindable from millicode */ + +GSYM($$divide_by_constant) + .export $$divide_by_constant,millicode +/* Provides a "nice" label for the code covered by the unwind descriptor + for things like gprof. */ + +/* DIVISION BY 2 (shift by 1) */ +GSYM($$divI_2) + .export $$divI_2,millicode + comclr,>= arg0,0,0 + addi 1,arg0,arg0 + MILLIRET + extrs arg0,30,31,ret1 + + +/* DIVISION BY 4 (shift by 2) */ +GSYM($$divI_4) + .export $$divI_4,millicode + comclr,>= arg0,0,0 + addi 3,arg0,arg0 + MILLIRET + extrs arg0,29,30,ret1 + + +/* DIVISION BY 8 (shift by 3) */ +GSYM($$divI_8) + .export $$divI_8,millicode + comclr,>= arg0,0,0 + addi 7,arg0,arg0 + MILLIRET + extrs arg0,28,29,ret1 + +/* DIVISION BY 16 (shift by 4) */ +GSYM($$divI_16) + .export $$divI_16,millicode + comclr,>= arg0,0,0 + addi 15,arg0,arg0 + MILLIRET + extrs arg0,27,28,ret1 + +/**************************************************************************** +* +* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these +* +* includes 3,5,15,17 and also 6,10,12 +* +****************************************************************************/ + +/* DIVISION BY 3 (use z = 2**32; a = 55555555) */ + +GSYM($$divI_3) + .export $$divI_3,millicode + comb,<,N x2,0,LREF(neg3) + + addi 1,x2,x2 /* this cannot overflow */ + extru x2,1,2,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,0,x1 + +LSYM(neg3) + subi 1,x2,x2 /* this cannot overflow */ + extru x2,1,2,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_3) + .export $$divU_3,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,30,t1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,t1,x1 + +/* DIVISION BY 5 (use z = 2**32; a = 33333333) */ + +GSYM($$divI_5) + .export $$divI_5,millicode + comb,<,N x2,0,LREF(neg5) + + addi 3,x2,t1 /* this cannot overflow */ + sh1add x2,t1,x2 /* multiply by 3 to get started */ + b LREF(pos) + addc 0,0,x1 + +LSYM(neg5) + sub 0,x2,x2 /* negate x2 */ + addi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,31,x1 /* get top bit (can be 1) */ + sh1add x2,x2,x2 /* multiply by 3 to get started */ + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_5) + .export $$divU_5,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,31,t1 /* multiply by 3 to get started */ + sh1add x2,x2,x2 + b LREF(pos) + addc t1,x1,x1 + +/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */ +GSYM($$divI_6) + .export $$divI_6,millicode + comb,<,N x2,0,LREF(neg6) + extru x2,30,31,x2 /* divide by 2 */ + addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */ + sh2add x2,t1,x2 /* multiply by 5 to get started */ + b LREF(pos) + addc 0,0,x1 + +LSYM(neg6) + subi 2,x2,x2 /* negate, divide by 2, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,30,31,x2 + shd 0,x2,30,x1 + sh2add x2,x2,x2 /* multiply by 5 to get started */ + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_6) + .export $$divU_6,millicode + extru x2,30,31,x2 /* divide by 2 */ + addi 1,x2,x2 /* cannot carry */ + shd 0,x2,30,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,0,x1 + +/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */ +GSYM($$divU_10) + .export $$divU_10,millicode + extru x2,30,31,x2 /* divide by 2 */ + addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */ + sh1add x2,t1,x2 /* multiply by 3 to get started */ + addc 0,0,x1 +LSYM(pos) + shd x1,x2,28,t1 /* multiply by 0x11 */ + shd x2,0,28,t2 + add x2,t2,x2 + addc x1,t1,x1 +LSYM(pos_for_17) + shd x1,x2,24,t1 /* multiply by 0x101 */ + shd x2,0,24,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,16,t1 /* multiply by 0x10001 */ + shd x2,0,16,t2 + add x2,t2,x2 + MILLIRET + addc x1,t1,x1 + +GSYM($$divI_10) + .export $$divI_10,millicode + comb,< x2,0,LREF(neg10) + copy 0,x1 + extru x2,30,31,x2 /* divide by 2 */ + addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */ + sh1add x2,x2,x2 /* multiply by 3 to get started */ + +LSYM(neg10) + subi 2,x2,x2 /* negate, divide by 2, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,30,31,x2 + sh1add x2,x2,x2 /* multiply by 3 to get started */ +LSYM(neg) + shd x1,x2,28,t1 /* multiply by 0x11 */ + shd x2,0,28,t2 + add x2,t2,x2 + addc x1,t1,x1 +LSYM(neg_for_17) + shd x1,x2,24,t1 /* multiply by 0x101 */ + shd x2,0,24,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,16,t1 /* multiply by 0x10001 */ + shd x2,0,16,t2 + add x2,t2,x2 + addc x1,t1,x1 + MILLIRET + sub 0,x1,x1 + +/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */ +GSYM($$divI_12) + .export $$divI_12,millicode + comb,< x2,0,LREF(neg12) + copy 0,x1 + extru x2,29,30,x2 /* divide by 4 */ + addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */ + sh2add x2,x2,x2 /* multiply by 5 to get started */ + +LSYM(neg12) + subi 4,x2,x2 /* negate, divide by 4, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,29,30,x2 + b LREF(neg) + sh2add x2,x2,x2 /* multiply by 5 to get started */ + +GSYM($$divU_12) + .export $$divU_12,millicode + extru x2,29,30,x2 /* divide by 4 */ + addi 5,x2,t1 /* cannot carry */ + sh2add x2,t1,x2 /* multiply by 5 to get started */ + b LREF(pos) + addc 0,0,x1 + +/* DIVISION BY 15 (use z = 2**32; a = 11111111) */ +GSYM($$divI_15) + .export $$divI_15,millicode + comb,< x2,0,LREF(neg15) + copy 0,x1 + addib,tr 1,x2,LREF(pos)+4 + shd x1,x2,28,t1 + +LSYM(neg15) + b LREF(neg) + subi 1,x2,x2 + +GSYM($$divU_15) + .export $$divU_15,millicode + addi 1,x2,x2 /* this CAN overflow */ + b LREF(pos) + addc 0,0,x1 + +/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */ +GSYM($$divI_17) + .export $$divI_17,millicode + comb,<,n x2,0,LREF(neg17) + addi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,28,t1 /* multiply by 0xf to get started */ + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(pos_for_17) + subb t1,0,x1 + +LSYM(neg17) + subi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,28,t1 /* multiply by 0xf to get started */ + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(neg_for_17) + subb t1,0,x1 + +GSYM($$divU_17) + .export $$divU_17,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,28,t1 /* multiply by 0xf to get started */ +LSYM(u17) + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(pos_for_17) + subb t1,x1,x1 + + +/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these + includes 7,9 and also 14 + + + z = 2**24-1 + r = z mod x = 0 + + so choose b = 0 + + Also, in order to divide by z = 2**24-1, we approximate by dividing + by (z+1) = 2**24 (which is easy), and then correcting. + + (ax) = (z+1)q' + r + . = zq' + (q'+r) + + So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1) + Then the true remainder of (ax)/z is (q'+r). Repeat the process + with this new remainder, adding the tentative quotients together, + until a tentative quotient is 0 (and then we are done). There is + one last correction to be done. It is possible that (q'+r) = z. + If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But, + in fact, we need to add 1 more to the quotient. Now, it turns + out that this happens if and only if the original value x is + an exact multiple of y. So, to avoid a three instruction test at + the end, instead use 1 instruction to add 1 to x at the beginning. */ + +/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */ +GSYM($$divI_7) + .export $$divI_7,millicode + comb,<,n x2,0,LREF(neg7) +LSYM(7) + addi 1,x2,x2 /* cannot overflow */ + shd 0,x2,29,x1 + sh3add x2,x2,x2 + addc x1,0,x1 +LSYM(pos7) + shd x1,x2,26,t1 + shd x2,0,26,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,20,t1 + shd x2,0,20,t2 + add x2,t2,x2 + addc x1,t1,t1 + + /* computed <t1,x2>. Now divide it by (2**24 - 1) */ + + copy 0,x1 + shd,= t1,x2,24,t1 /* tentative quotient */ +LSYM(1) + addb,tr t1,x1,LREF(2) /* add to previous quotient */ + extru x2,31,24,x2 /* new remainder (unadjusted) */ + + MILLIRETN + +LSYM(2) + addb,tr t1,x2,LREF(1) /* adjust remainder */ + extru,= x2,7,8,t1 /* new quotient */ + +LSYM(neg7) + subi 1,x2,x2 /* negate x2 and add 1 */ +LSYM(8) + shd 0,x2,29,x1 + sh3add x2,x2,x2 + addc x1,0,x1 + +LSYM(neg7_shift) + shd x1,x2,26,t1 + shd x2,0,26,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,20,t1 + shd x2,0,20,t2 + add x2,t2,x2 + addc x1,t1,t1 + + /* computed <t1,x2>. Now divide it by (2**24 - 1) */ + + copy 0,x1 + shd,= t1,x2,24,t1 /* tentative quotient */ +LSYM(3) + addb,tr t1,x1,LREF(4) /* add to previous quotient */ + extru x2,31,24,x2 /* new remainder (unadjusted) */ + + MILLIRET + sub 0,x1,x1 /* negate result */ + +LSYM(4) + addb,tr t1,x2,LREF(3) /* adjust remainder */ + extru,= x2,7,8,t1 /* new quotient */ + +GSYM($$divU_7) + .export $$divU_7,millicode + addi 1,x2,x2 /* can carry */ + addc 0,0,x1 + shd x1,x2,29,t1 + sh3add x2,x2,x2 + b LREF(pos7) + addc t1,x1,x1 + +/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */ +GSYM($$divI_9) + .export $$divI_9,millicode + comb,<,n x2,0,LREF(neg9) + addi 1,x2,x2 /* cannot overflow */ + shd 0,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(pos7) + subb t1,0,x1 + +LSYM(neg9) + subi 1,x2,x2 /* negate and add 1 */ + shd 0,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(neg7_shift) + subb t1,0,x1 + +GSYM($$divU_9) + .export $$divU_9,millicode + addi 1,x2,x2 /* can carry */ + addc 0,0,x1 + shd x1,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(pos7) + subb t1,x1,x1 + +/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */ +GSYM($$divI_14) + .export $$divI_14,millicode + comb,<,n x2,0,LREF(neg14) +GSYM($$divU_14) + .export $$divU_14,millicode + b LREF(7) /* go to 7 case */ + extru x2,30,31,x2 /* divide by 2 */ + +LSYM(neg14) + subi 2,x2,x2 /* negate (and add 2) */ + b LREF(8) + extru x2,30,31,x2 /* divide by 2 */ + .exit + .procend + .end +#endif diff --git a/arch/parisc/lib/milli/dyncall.S b/arch/parisc/lib/milli/dyncall.S new file mode 100644 index 00000000000..27f9ca558d0 --- /dev/null +++ b/arch/parisc/lib/milli/dyncall.S @@ -0,0 +1,32 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_dyncall + SUBSPA_MILLI + ATTR_DATA +GSYM($$dyncall) + .export $$dyncall,millicode + .proc + .callinfo millicode + .entry + bb,>=,n %r22,30,LREF(1) ; branch if not plabel address + depi 0,31,2,%r22 ; clear the two least significant bits + ldw 4(%r22),%r19 ; load new LTP value + ldw 0(%r22),%r22 ; load address of target +LSYM(1) + bv %r0(%r22) ; branch to the real target + stw %r2,-24(%r30) ; save return address into frame marker + .exit + .procend +#endif diff --git a/arch/parisc/lib/milli/milli.S b/arch/parisc/lib/milli/milli.S new file mode 100644 index 00000000000..47c6cde712e --- /dev/null +++ b/arch/parisc/lib/milli/milli.S @@ -0,0 +1,2071 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#ifdef CONFIG_64BIT + .level 2.0w +#endif + +/* Hardware General Registers. */ +r0: .reg %r0 +r1: .reg %r1 +r2: .reg %r2 +r3: .reg %r3 +r4: .reg %r4 +r5: .reg %r5 +r6: .reg %r6 +r7: .reg %r7 +r8: .reg %r8 +r9: .reg %r9 +r10: .reg %r10 +r11: .reg %r11 +r12: .reg %r12 +r13: .reg %r13 +r14: .reg %r14 +r15: .reg %r15 +r16: .reg %r16 +r17: .reg %r17 +r18: .reg %r18 +r19: .reg %r19 +r20: .reg %r20 +r21: .reg %r21 +r22: .reg %r22 +r23: .reg %r23 +r24: .reg %r24 +r25: .reg %r25 +r26: .reg %r26 +r27: .reg %r27 +r28: .reg %r28 +r29: .reg %r29 +r30: .reg %r30 +r31: .reg %r31 + +/* Hardware Space Registers. */ +sr0: .reg %sr0 +sr1: .reg %sr1 +sr2: .reg %sr2 +sr3: .reg %sr3 +sr4: .reg %sr4 +sr5: .reg %sr5 +sr6: .reg %sr6 +sr7: .reg %sr7 + +/* Hardware Floating Point Registers. */ +fr0: .reg %fr0 +fr1: .reg %fr1 +fr2: .reg %fr2 +fr3: .reg %fr3 +fr4: .reg %fr4 +fr5: .reg %fr5 +fr6: .reg %fr6 +fr7: .reg %fr7 +fr8: .reg %fr8 +fr9: .reg %fr9 +fr10: .reg %fr10 +fr11: .reg %fr11 +fr12: .reg %fr12 +fr13: .reg %fr13 +fr14: .reg %fr14 +fr15: .reg %fr15 + +/* Hardware Control Registers. */ +cr11: .reg %cr11 +sar: .reg %cr11 /* Shift Amount Register */ + +/* Software Architecture General Registers. */ +rp: .reg r2 /* return pointer */ +#ifdef CONFIG_64BIT +mrp: .reg r2 /* millicode return pointer */ +#else +mrp: .reg r31 /* millicode return pointer */ +#endif +ret0: .reg r28 /* return value */ +ret1: .reg r29 /* return value (high part of double) */ +sp: .reg r30 /* stack pointer */ +dp: .reg r27 /* data pointer */ +arg0: .reg r26 /* argument */ +arg1: .reg r25 /* argument or high part of double argument */ +arg2: .reg r24 /* argument */ +arg3: .reg r23 /* argument or high part of double argument */ + +/* Software Architecture Space Registers. */ +/* sr0 ; return link from BLE */ +sret: .reg sr1 /* return value */ +sarg: .reg sr1 /* argument */ +/* sr4 ; PC SPACE tracker */ +/* sr5 ; process private data */ + +/* Frame Offsets (millicode convention!) Used when calling other + millicode routines. Stack unwinding is dependent upon these + definitions. */ +r31_slot: .equ -20 /* "current RP" slot */ +sr0_slot: .equ -16 /* "static link" slot */ +#if defined(CONFIG_64BIT) +mrp_slot: .equ -16 /* "current RP" slot */ +psp_slot: .equ -8 /* "previous SP" slot */ +#else +mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */ +#endif + + +#define DEFINE(name,value)name: .EQU value +#define RDEFINE(name,value)name: .REG value +#ifdef milliext +#define MILLI_BE(lbl) BE lbl(sr7,r0) +#define MILLI_BEN(lbl) BE,n lbl(sr7,r0) +#define MILLI_BLE(lbl) BLE lbl(sr7,r0) +#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0) +#define MILLIRETN BE,n 0(sr0,mrp) +#define MILLIRET BE 0(sr0,mrp) +#define MILLI_RETN BE,n 0(sr0,mrp) +#define MILLI_RET BE 0(sr0,mrp) +#else +#define MILLI_BE(lbl) B lbl +#define MILLI_BEN(lbl) B,n lbl +#define MILLI_BLE(lbl) BL lbl,mrp +#define MILLI_BLEN(lbl) BL,n lbl,mrp +#define MILLIRETN BV,n 0(mrp) +#define MILLIRET BV 0(mrp) +#define MILLI_RETN BV,n 0(mrp) +#define MILLI_RET BV 0(mrp) +#endif + +#define CAT(a,b) a##b + +#define SUBSPA_MILLI .section .text +#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16 +#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16 +#define ATTR_MILLI +#define SUBSPA_DATA .section .data +#define ATTR_DATA +#define GLOBAL $global$ +#define GSYM(sym) !sym: +#define LSYM(sym) !CAT(.L,sym:) +#define LREF(sym) CAT(.L,sym) + +#ifdef L_dyncall + SUBSPA_MILLI + ATTR_DATA +GSYM($$dyncall) + .export $$dyncall,millicode + .proc + .callinfo millicode + .entry + bb,>=,n %r22,30,LREF(1) ; branch if not plabel address + depi 0,31,2,%r22 ; clear the two least significant bits + ldw 4(%r22),%r19 ; load new LTP value + ldw 0(%r22),%r22 ; load address of target +LSYM(1) + bv %r0(%r22) ; branch to the real target + stw %r2,-24(%r30) ; save return address into frame marker + .exit + .procend +#endif + +#ifdef L_divI +/* ROUTINES: $$divI, $$divoI + + Single precision divide for signed binary integers. + + The quotient is truncated towards zero. + The sign of the quotient is the XOR of the signs of the dividend and + divisor. + Divide by zero is trapped. + Divide of -2**31 by -1 is trapped for $$divoI but not for $$divI. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: + . divisor is zero (traps with ADDIT,= 0,25,0) + . dividend==-2**31 and divisor==-1 and routine is $$divoI + . (traps with ADDO 26,25,0) + . Changes memory at the following places: + . NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Branchs to other millicode routines using BE + . $$div_# for # being 2,3,4,5,6,7,8,9,10,12,14,15 + . + . For selected divisors, calls a divide by constant routine written by + . Karl Pettis. Eligible divisors are 1..15 excluding 11 and 13. + . + . The only overflow case is -2**31 divided by -1. + . Both routines return -2**31 but only $$divoI traps. */ + +RDEFINE(temp,r1) +RDEFINE(retreg,ret1) /* r29 */ +RDEFINE(temp1,arg0) + SUBSPA_MILLI_DIV + ATTR_MILLI + .import $$divI_2,millicode + .import $$divI_3,millicode + .import $$divI_4,millicode + .import $$divI_5,millicode + .import $$divI_6,millicode + .import $$divI_7,millicode + .import $$divI_8,millicode + .import $$divI_9,millicode + .import $$divI_10,millicode + .import $$divI_12,millicode + .import $$divI_14,millicode + .import $$divI_15,millicode + .export $$divI,millicode + .export $$divoI,millicode + .proc + .callinfo millicode + .entry +GSYM($$divoI) + comib,=,n -1,arg1,LREF(negative1) /* when divisor == -1 */ +GSYM($$divI) + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,<> arg1,temp,r0 /* if not, don't use power of 2 divide */ + addi,> 0,arg1,r0 /* if divisor > 0, use power of 2 divide */ + b,n LREF(neg_denom) +LSYM(pow2) + addi,>= 0,arg0,retreg /* if numerator is negative, add the */ + add arg0,temp,retreg /* (denominaotr -1) to correct for shifts */ + extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */ + extrs retreg,15,16,retreg /* retreg = retreg >> 16 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */ + ldi 0xcc,temp1 /* setup 0xcc in temp1 */ + extru,= arg1,23,8,temp /* test denominator with 0xff00 */ + extrs retreg,23,24,retreg /* retreg = retreg >> 8 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */ + ldi 0xaa,temp /* setup 0xaa in temp */ + extru,= arg1,27,4,r0 /* test denominator with 0xf0 */ + extrs retreg,27,28,retreg /* retreg = retreg >> 4 */ + and,= arg1,temp1,r0 /* test denominator with 0xcc */ + extrs retreg,29,30,retreg /* retreg = retreg >> 2 */ + and,= arg1,temp,r0 /* test denominator with 0xaa */ + extrs retreg,30,31,retreg /* retreg = retreg >> 1 */ + MILLIRETN +LSYM(neg_denom) + addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power of 2 */ + b,n LREF(regular_seq) + sub r0,arg1,temp /* make denominator positive */ + comb,=,n arg1,temp,LREF(regular_seq) /* test against 0x80000000 and 0 */ + ldo -1(temp),retreg /* is there at most one bit set ? */ + and,= temp,retreg,r0 /* if so, the denominator is power of 2 */ + b,n LREF(regular_seq) + sub r0,arg0,retreg /* negate numerator */ + comb,=,n arg0,retreg,LREF(regular_seq) /* test against 0x80000000 */ + copy retreg,arg0 /* set up arg0, arg1 and temp */ + copy temp,arg1 /* before branching to pow2 */ + b LREF(pow2) + ldo -1(arg1),temp +LSYM(regular_seq) + comib,>>=,n 15,arg1,LREF(small_divisor) + add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */ +LSYM(normal) + subi 0,retreg,retreg /* make it positive */ + sub 0,arg1,temp /* clear carry, */ + /* negate the divisor */ + ds 0,temp,0 /* set V-bit to the comple- */ + /* ment of the divisor sign */ + add retreg,retreg,retreg /* shift msb bit into carry */ + ds r0,arg1,temp /* 1st divide step, if no carry */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 32nd divide step, */ + addc retreg,retreg,retreg /* shift last retreg bit into retreg */ + xor,>= arg0,arg1,0 /* get correct sign of quotient */ + sub 0,retreg,retreg /* based on operand signs */ + MILLIRETN + nop + +LSYM(small_divisor) + +#if defined(CONFIG_64BIT) +/* Clear the upper 32 bits of the arg1 register. We are working with */ +/* small divisors (and 32-bit integers) We must not be mislead */ +/* by "1" bits left in the upper 32 bits. */ + depd %r0,31,32,%r25 +#endif + blr,n arg1,r0 + nop +/* table for divisor == 0,1, ... ,15 */ + addit,= 0,arg1,r0 /* trap if divisor == 0 */ + nop + MILLIRET /* divisor == 1 */ + copy arg0,retreg + MILLI_BEN($$divI_2) /* divisor == 2 */ + nop + MILLI_BEN($$divI_3) /* divisor == 3 */ + nop + MILLI_BEN($$divI_4) /* divisor == 4 */ + nop + MILLI_BEN($$divI_5) /* divisor == 5 */ + nop + MILLI_BEN($$divI_6) /* divisor == 6 */ + nop + MILLI_BEN($$divI_7) /* divisor == 7 */ + nop + MILLI_BEN($$divI_8) /* divisor == 8 */ + nop + MILLI_BEN($$divI_9) /* divisor == 9 */ + nop + MILLI_BEN($$divI_10) /* divisor == 10 */ + nop + b LREF(normal) /* divisor == 11 */ + add,>= 0,arg0,retreg + MILLI_BEN($$divI_12) /* divisor == 12 */ + nop + b LREF(normal) /* divisor == 13 */ + add,>= 0,arg0,retreg + MILLI_BEN($$divI_14) /* divisor == 14 */ + nop + MILLI_BEN($$divI_15) /* divisor == 15 */ + nop + +LSYM(negative1) + sub 0,arg0,retreg /* result is negation of dividend */ + MILLIRET + addo arg0,arg1,r0 /* trap iff dividend==0x80000000 && divisor==-1 */ + .exit + .procend + .end +#endif + +#ifdef L_divU +/* ROUTINE: $$divU + . + . Single precision divide for unsigned integers. + . + . Quotient is truncated towards zero. + . Traps on divide by zero. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: + . divisor is zero + . Changes memory at the following places: + . NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Branchs to other millicode routines using BE: + . $$divU_# for 3,5,6,7,9,10,12,14,15 + . + . For selected small divisors calls the special divide by constant + . routines written by Karl Pettis. These are: 3,5,6,7,9,10,12,14,15. */ + +RDEFINE(temp,r1) +RDEFINE(retreg,ret1) /* r29 */ +RDEFINE(temp1,arg0) + SUBSPA_MILLI_DIV + ATTR_MILLI + .export $$divU,millicode + .import $$divU_3,millicode + .import $$divU_5,millicode + .import $$divU_6,millicode + .import $$divU_7,millicode + .import $$divU_9,millicode + .import $$divU_10,millicode + .import $$divU_12,millicode + .import $$divU_14,millicode + .import $$divU_15,millicode + .proc + .callinfo millicode + .entry +GSYM($$divU) +/* The subtract is not nullified since it does no harm and can be used + by the two cases that branch back to "normal". */ + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,= arg1,temp,r0 /* if so, denominator is power of 2 */ + b LREF(regular_seq) + addit,= 0,arg1,0 /* trap for zero dvr */ + copy arg0,retreg + extru,= arg1,15,16,temp /* test denominator with 0xffff0000 */ + extru retreg,15,16,retreg /* retreg = retreg >> 16 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 16) */ + ldi 0xcc,temp1 /* setup 0xcc in temp1 */ + extru,= arg1,23,8,temp /* test denominator with 0xff00 */ + extru retreg,23,24,retreg /* retreg = retreg >> 8 */ + or arg1,temp,arg1 /* arg1 = arg1 | (arg1 >> 8) */ + ldi 0xaa,temp /* setup 0xaa in temp */ + extru,= arg1,27,4,r0 /* test denominator with 0xf0 */ + extru retreg,27,28,retreg /* retreg = retreg >> 4 */ + and,= arg1,temp1,r0 /* test denominator with 0xcc */ + extru retreg,29,30,retreg /* retreg = retreg >> 2 */ + and,= arg1,temp,r0 /* test denominator with 0xaa */ + extru retreg,30,31,retreg /* retreg = retreg >> 1 */ + MILLIRETN + nop +LSYM(regular_seq) + comib,>= 15,arg1,LREF(special_divisor) + subi 0,arg1,temp /* clear carry, negate the divisor */ + ds r0,temp,r0 /* set V-bit to 1 */ +LSYM(normal) + add arg0,arg0,retreg /* shift msb bit into carry */ + ds r0,arg1,temp /* 1st divide step, if no carry */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds temp,arg1,temp /* 32nd divide step, */ + MILLIRET + addc retreg,retreg,retreg /* shift last retreg bit into retreg */ + +/* Handle the cases where divisor is a small constant or has high bit on. */ +LSYM(special_divisor) +/* blr arg1,r0 */ +/* comib,>,n 0,arg1,LREF(big_divisor) ; nullify previous instruction */ + +/* Pratap 8/13/90. The 815 Stirling chip set has a bug that prevents us from + generating such a blr, comib sequence. A problem in nullification. So I + rewrote this code. */ + +#if defined(CONFIG_64BIT) +/* Clear the upper 32 bits of the arg1 register. We are working with + small divisors (and 32-bit unsigned integers) We must not be mislead + by "1" bits left in the upper 32 bits. */ + depd %r0,31,32,%r25 +#endif + comib,> 0,arg1,LREF(big_divisor) + nop + blr arg1,r0 + nop + +LSYM(zero_divisor) /* this label is here to provide external visibility */ + addit,= 0,arg1,0 /* trap for zero dvr */ + nop + MILLIRET /* divisor == 1 */ + copy arg0,retreg + MILLIRET /* divisor == 2 */ + extru arg0,30,31,retreg + MILLI_BEN($$divU_3) /* divisor == 3 */ + nop + MILLIRET /* divisor == 4 */ + extru arg0,29,30,retreg + MILLI_BEN($$divU_5) /* divisor == 5 */ + nop + MILLI_BEN($$divU_6) /* divisor == 6 */ + nop + MILLI_BEN($$divU_7) /* divisor == 7 */ + nop + MILLIRET /* divisor == 8 */ + extru arg0,28,29,retreg + MILLI_BEN($$divU_9) /* divisor == 9 */ + nop + MILLI_BEN($$divU_10) /* divisor == 10 */ + nop + b LREF(normal) /* divisor == 11 */ + ds r0,temp,r0 /* set V-bit to 1 */ + MILLI_BEN($$divU_12) /* divisor == 12 */ + nop + b LREF(normal) /* divisor == 13 */ + ds r0,temp,r0 /* set V-bit to 1 */ + MILLI_BEN($$divU_14) /* divisor == 14 */ + nop + MILLI_BEN($$divU_15) /* divisor == 15 */ + nop + +/* Handle the case where the high bit is on in the divisor. + Compute: if( dividend>=divisor) quotient=1; else quotient=0; + Note: dividend>==divisor iff dividend-divisor does not borrow + and not borrow iff carry. */ +LSYM(big_divisor) + sub arg0,arg1,r0 + MILLIRET + addc r0,r0,retreg + .exit + .procend + .end +#endif + +#ifdef L_remI +/* ROUTINE: $$remI + + DESCRIPTION: + . $$remI returns the remainder of the division of two signed 32-bit + . integers. The sign of the remainder is the same as the sign of + . the dividend. + + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = destroyed + . arg1 = destroyed + . ret1 = remainder + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: DIVIDE BY ZERO + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable + . Does not create a stack frame + . Is usable for internal or external microcode + + DISCUSSION: + . Calls other millicode routines via mrp: NONE + . Calls other millicode routines: NONE */ + +RDEFINE(tmp,r1) +RDEFINE(retreg,ret1) + + SUBSPA_MILLI + ATTR_MILLI + .proc + .callinfo millicode + .entry +GSYM($$remI) +GSYM($$remoI) + .export $$remI,MILLICODE + .export $$remoI,MILLICODE + ldo -1(arg1),tmp /* is there at most one bit set ? */ + and,<> arg1,tmp,r0 /* if not, don't use power of 2 */ + addi,> 0,arg1,r0 /* if denominator > 0, use power */ + /* of 2 */ + b,n LREF(neg_denom) +LSYM(pow2) + comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */ + and arg0,tmp,retreg /* get the result */ + MILLIRETN +LSYM(neg_num) + subi 0,arg0,arg0 /* negate numerator */ + and arg0,tmp,retreg /* get the result */ + subi 0,retreg,retreg /* negate result */ + MILLIRETN +LSYM(neg_denom) + addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */ + /* of 2 */ + b,n LREF(regular_seq) + sub r0,arg1,tmp /* make denominator positive */ + comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */ + ldo -1(tmp),retreg /* is there at most one bit set ? */ + and,= tmp,retreg,r0 /* if not, go to regular_seq */ + b,n LREF(regular_seq) + comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */ + and arg0,retreg,retreg + MILLIRETN +LSYM(neg_num_2) + subi 0,arg0,tmp /* test against 0x80000000 */ + and tmp,retreg,retreg + subi 0,retreg,retreg + MILLIRETN +LSYM(regular_seq) + addit,= 0,arg1,0 /* trap if div by zero */ + add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */ + sub 0,retreg,retreg /* make it positive */ + sub 0,arg1, tmp /* clear carry, */ + /* negate the divisor */ + ds 0, tmp,0 /* set V-bit to the comple- */ + /* ment of the divisor sign */ + or 0,0, tmp /* clear tmp */ + add retreg,retreg,retreg /* shift msb bit into carry */ + ds tmp,arg1, tmp /* 1st divide step, if no carry */ + /* out, msb of quotient = 0 */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ +LSYM(t1) + ds tmp,arg1, tmp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 32nd divide step, */ + addc retreg,retreg,retreg /* shift last bit into retreg */ + movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */ + add,< arg1,0,0 /* if arg1 > 0, add arg1 */ + add,tr tmp,arg1,retreg /* for correcting remainder tmp */ + sub tmp,arg1,retreg /* else add absolute value arg1 */ +LSYM(finish) + add,>= arg0,0,0 /* set sign of remainder */ + sub 0,retreg,retreg /* to sign of dividend */ + MILLIRET + nop + .exit + .procend +#ifdef milliext + .origin 0x00000200 +#endif + .end +#endif + +#ifdef L_remU +/* ROUTINE: $$remU + . Single precision divide for remainder with unsigned binary integers. + . + . The remainder must be dividend-(dividend/divisor)*divisor. + . Divide by zero is trapped. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = remainder + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: DIVIDE BY ZERO + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Calls other millicode routines using mrp: NONE + . Calls other millicode routines: NONE */ + + +RDEFINE(temp,r1) +RDEFINE(rmndr,ret1) /* r29 */ + SUBSPA_MILLI + ATTR_MILLI + .export $$remU,millicode + .proc + .callinfo millicode + .entry +GSYM($$remU) + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,= arg1,temp,r0 /* if not, don't use power of 2 */ + b LREF(regular_seq) + addit,= 0,arg1,r0 /* trap on div by zero */ + and arg0,temp,rmndr /* get the result for power of 2 */ + MILLIRETN +LSYM(regular_seq) + comib,>=,n 0,arg1,LREF(special_case) + subi 0,arg1,rmndr /* clear carry, negate the divisor */ + ds r0,rmndr,r0 /* set V-bit to 1 */ + add arg0,arg0,temp /* shift msb bit into carry */ + ds r0,arg1,rmndr /* 1st divide step, if no carry */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 2nd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 3rd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 4th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 5th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 6th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 7th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 8th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 9th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 10th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 11th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 12th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 13th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 14th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 15th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 16th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 17th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 18th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 19th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 20th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 21st divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 22nd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 23rd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 24th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 25th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 26th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 27th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 28th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 29th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 30th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 31st divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 32nd divide step, */ + comiclr,<= 0,rmndr,r0 + add rmndr,arg1,rmndr /* correction */ + MILLIRETN + nop + +/* Putting >= on the last DS and deleting COMICLR does not work! */ +LSYM(special_case) + sub,>>= arg0,arg1,rmndr + copy arg0,rmndr + MILLIRETN + nop + .exit + .procend + .end +#endif + +#ifdef L_div_const +/* ROUTINE: $$divI_2 + . $$divI_3 $$divU_3 + . $$divI_4 + . $$divI_5 $$divU_5 + . $$divI_6 $$divU_6 + . $$divI_7 $$divU_7 + . $$divI_8 + . $$divI_9 $$divU_9 + . $$divI_10 $$divU_10 + . + . $$divI_12 $$divU_12 + . + . $$divI_14 $$divU_14 + . $$divI_15 $$divU_15 + . $$divI_16 + . $$divI_17 $$divU_17 + . + . Divide by selected constants for single precision binary integers. + + INPUT REGISTERS: + . arg0 == dividend + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = quotient + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: NONE + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Calls other millicode routines using mrp: NONE + . Calls other millicode routines: NONE */ + + +/* TRUNCATED DIVISION BY SMALL INTEGERS + + We are interested in q(x) = floor(x/y), where x >= 0 and y > 0 + (with y fixed). + + Let a = floor(z/y), for some choice of z. Note that z will be + chosen so that division by z is cheap. + + Let r be the remainder(z/y). In other words, r = z - ay. + + Now, our method is to choose a value for b such that + + q'(x) = floor((ax+b)/z) + + is equal to q(x) over as large a range of x as possible. If the + two are equal over a sufficiently large range, and if it is easy to + form the product (ax), and it is easy to divide by z, then we can + perform the division much faster than the general division algorithm. + + So, we want the following to be true: + + . For x in the following range: + . + . ky <= x < (k+1)y + . + . implies that + . + . k <= (ax+b)/z < (k+1) + + We want to determine b such that this is true for all k in the + range {0..K} for some maximum K. + + Since (ax+b) is an increasing function of x, we can take each + bound separately to determine the "best" value for b. + + (ax+b)/z < (k+1) implies + + (a((k+1)y-1)+b < (k+1)z implies + + b < a + (k+1)(z-ay) implies + + b < a + (k+1)r + + This needs to be true for all k in the range {0..K}. In + particular, it is true for k = 0 and this leads to a maximum + acceptable value for b. + + b < a+r or b <= a+r-1 + + Taking the other bound, we have + + k <= (ax+b)/z implies + + k <= (aky+b)/z implies + + k(z-ay) <= b implies + + kr <= b + + Clearly, the largest range for k will be achieved by maximizing b, + when r is not zero. When r is zero, then the simplest choice for b + is 0. When r is not 0, set + + . b = a+r-1 + + Now, by construction, q'(x) = floor((ax+b)/z) = q(x) = floor(x/y) + for all x in the range: + + . 0 <= x < (K+1)y + + We need to determine what K is. Of our two bounds, + + . b < a+(k+1)r is satisfied for all k >= 0, by construction. + + The other bound is + + . kr <= b + + This is always true if r = 0. If r is not 0 (the usual case), then + K = floor((a+r-1)/r), is the maximum value for k. + + Therefore, the formula q'(x) = floor((ax+b)/z) yields the correct + answer for q(x) = floor(x/y) when x is in the range + + (0,(K+1)y-1) K = floor((a+r-1)/r) + + To be most useful, we want (K+1)y-1 = (max x) >= 2**32-1 so that + the formula for q'(x) yields the correct value of q(x) for all x + representable by a single word in HPPA. + + We are also constrained in that computing the product (ax), adding + b, and dividing by z must all be done quickly, otherwise we will be + better off going through the general algorithm using the DS + instruction, which uses approximately 70 cycles. + + For each y, there is a choice of z which satisfies the constraints + for (K+1)y >= 2**32. We may not, however, be able to satisfy the + timing constraints for arbitrary y. It seems that z being equal to + a power of 2 or a power of 2 minus 1 is as good as we can do, since + it minimizes the time to do division by z. We want the choice of z + to also result in a value for (a) that minimizes the computation of + the product (ax). This is best achieved if (a) has a regular bit + pattern (so the multiplication can be done with shifts and adds). + The value of (a) also needs to be less than 2**32 so the product is + always guaranteed to fit in 2 words. + + In actual practice, the following should be done: + + 1) For negative x, you should take the absolute value and remember + . the fact so that the result can be negated. This obviously does + . not apply in the unsigned case. + 2) For even y, you should factor out the power of 2 that divides y + . and divide x by it. You can then proceed by dividing by the + . odd factor of y. + + Here is a table of some odd values of y, and corresponding choices + for z which are "good". + + y z r a (hex) max x (hex) + + 3 2**32 1 55555555 100000001 + 5 2**32 1 33333333 100000003 + 7 2**24-1 0 249249 (infinite) + 9 2**24-1 0 1c71c7 (infinite) + 11 2**20-1 0 1745d (infinite) + 13 2**24-1 0 13b13b (infinite) + 15 2**32 1 11111111 10000000d + 17 2**32 1 f0f0f0f 10000000f + + If r is 1, then b = a+r-1 = a. This simplifies the computation + of (ax+b), since you can compute (x+1)(a) instead. If r is 0, + then b = 0 is ok to use which simplifies (ax+b). + + The bit patterns for 55555555, 33333333, and 11111111 are obviously + very regular. The bit patterns for the other values of a above are: + + y (hex) (binary) + + 7 249249 001001001001001001001001 << regular >> + 9 1c71c7 000111000111000111000111 << regular >> + 11 1745d 000000010111010001011101 << irregular >> + 13 13b13b 000100111011000100111011 << irregular >> + + The bit patterns for (a) corresponding to (y) of 11 and 13 may be + too irregular to warrant using this method. + + When z is a power of 2 minus 1, then the division by z is slightly + more complicated, involving an iterative solution. + + The code presented here solves division by 1 through 17, except for + 11 and 13. There are algorithms for both signed and unsigned + quantities given. + + TIMINGS (cycles) + + divisor positive negative unsigned + + . 1 2 2 2 + . 2 4 4 2 + . 3 19 21 19 + . 4 4 4 2 + . 5 18 22 19 + . 6 19 22 19 + . 8 4 4 2 + . 10 18 19 17 + . 12 18 20 18 + . 15 16 18 16 + . 16 4 4 2 + . 17 16 18 16 + + Now, the algorithm for 7, 9, and 14 is an iterative one. That is, + a loop body is executed until the tentative quotient is 0. The + number of times the loop body is executed varies depending on the + dividend, but is never more than two times. If the dividend is + less than the divisor, then the loop body is not executed at all. + Each iteration adds 4 cycles to the timings. + + divisor positive negative unsigned + + . 7 19+4n 20+4n 20+4n n = number of iterations + . 9 21+4n 22+4n 21+4n + . 14 21+4n 22+4n 20+4n + + To give an idea of how the number of iterations varies, here is a + table of dividend versus number of iterations when dividing by 7. + + smallest largest required + dividend dividend iterations + + . 0 6 0 + . 7 0x6ffffff 1 + 0x1000006 0xffffffff 2 + + There is some overlap in the range of numbers requiring 1 and 2 + iterations. */ + +RDEFINE(t2,r1) +RDEFINE(x2,arg0) /* r26 */ +RDEFINE(t1,arg1) /* r25 */ +RDEFINE(x1,ret1) /* r29 */ + + SUBSPA_MILLI_DIV + ATTR_MILLI + + .proc + .callinfo millicode + .entry +/* NONE of these routines require a stack frame + ALL of these routines are unwindable from millicode */ + +GSYM($$divide_by_constant) + .export $$divide_by_constant,millicode +/* Provides a "nice" label for the code covered by the unwind descriptor + for things like gprof. */ + +/* DIVISION BY 2 (shift by 1) */ +GSYM($$divI_2) + .export $$divI_2,millicode + comclr,>= arg0,0,0 + addi 1,arg0,arg0 + MILLIRET + extrs arg0,30,31,ret1 + + +/* DIVISION BY 4 (shift by 2) */ +GSYM($$divI_4) + .export $$divI_4,millicode + comclr,>= arg0,0,0 + addi 3,arg0,arg0 + MILLIRET + extrs arg0,29,30,ret1 + + +/* DIVISION BY 8 (shift by 3) */ +GSYM($$divI_8) + .export $$divI_8,millicode + comclr,>= arg0,0,0 + addi 7,arg0,arg0 + MILLIRET + extrs arg0,28,29,ret1 + +/* DIVISION BY 16 (shift by 4) */ +GSYM($$divI_16) + .export $$divI_16,millicode + comclr,>= arg0,0,0 + addi 15,arg0,arg0 + MILLIRET + extrs arg0,27,28,ret1 + +/**************************************************************************** +* +* DIVISION BY DIVISORS OF FFFFFFFF, and powers of 2 times these +* +* includes 3,5,15,17 and also 6,10,12 +* +****************************************************************************/ + +/* DIVISION BY 3 (use z = 2**32; a = 55555555) */ + +GSYM($$divI_3) + .export $$divI_3,millicode + comb,<,N x2,0,LREF(neg3) + + addi 1,x2,x2 /* this cannot overflow */ + extru x2,1,2,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,0,x1 + +LSYM(neg3) + subi 1,x2,x2 /* this cannot overflow */ + extru x2,1,2,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_3) + .export $$divU_3,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,30,t1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,t1,x1 + +/* DIVISION BY 5 (use z = 2**32; a = 33333333) */ + +GSYM($$divI_5) + .export $$divI_5,millicode + comb,<,N x2,0,LREF(neg5) + + addi 3,x2,t1 /* this cannot overflow */ + sh1add x2,t1,x2 /* multiply by 3 to get started */ + b LREF(pos) + addc 0,0,x1 + +LSYM(neg5) + sub 0,x2,x2 /* negate x2 */ + addi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,31,x1 /* get top bit (can be 1) */ + sh1add x2,x2,x2 /* multiply by 3 to get started */ + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_5) + .export $$divU_5,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,31,t1 /* multiply by 3 to get started */ + sh1add x2,x2,x2 + b LREF(pos) + addc t1,x1,x1 + +/* DIVISION BY 6 (shift to divide by 2 then divide by 3) */ +GSYM($$divI_6) + .export $$divI_6,millicode + comb,<,N x2,0,LREF(neg6) + extru x2,30,31,x2 /* divide by 2 */ + addi 5,x2,t1 /* compute 5*(x2+1) = 5*x2+5 */ + sh2add x2,t1,x2 /* multiply by 5 to get started */ + b LREF(pos) + addc 0,0,x1 + +LSYM(neg6) + subi 2,x2,x2 /* negate, divide by 2, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,30,31,x2 + shd 0,x2,30,x1 + sh2add x2,x2,x2 /* multiply by 5 to get started */ + b LREF(neg) + addc x1,0,x1 + +GSYM($$divU_6) + .export $$divU_6,millicode + extru x2,30,31,x2 /* divide by 2 */ + addi 1,x2,x2 /* cannot carry */ + shd 0,x2,30,x1 /* multiply by 5 to get started */ + sh2add x2,x2,x2 + b LREF(pos) + addc x1,0,x1 + +/* DIVISION BY 10 (shift to divide by 2 then divide by 5) */ +GSYM($$divU_10) + .export $$divU_10,millicode + extru x2,30,31,x2 /* divide by 2 */ + addi 3,x2,t1 /* compute 3*(x2+1) = (3*x2)+3 */ + sh1add x2,t1,x2 /* multiply by 3 to get started */ + addc 0,0,x1 +LSYM(pos) + shd x1,x2,28,t1 /* multiply by 0x11 */ + shd x2,0,28,t2 + add x2,t2,x2 + addc x1,t1,x1 +LSYM(pos_for_17) + shd x1,x2,24,t1 /* multiply by 0x101 */ + shd x2,0,24,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,16,t1 /* multiply by 0x10001 */ + shd x2,0,16,t2 + add x2,t2,x2 + MILLIRET + addc x1,t1,x1 + +GSYM($$divI_10) + .export $$divI_10,millicode + comb,< x2,0,LREF(neg10) + copy 0,x1 + extru x2,30,31,x2 /* divide by 2 */ + addib,TR 1,x2,LREF(pos) /* add 1 (cannot overflow) */ + sh1add x2,x2,x2 /* multiply by 3 to get started */ + +LSYM(neg10) + subi 2,x2,x2 /* negate, divide by 2, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,30,31,x2 + sh1add x2,x2,x2 /* multiply by 3 to get started */ +LSYM(neg) + shd x1,x2,28,t1 /* multiply by 0x11 */ + shd x2,0,28,t2 + add x2,t2,x2 + addc x1,t1,x1 +LSYM(neg_for_17) + shd x1,x2,24,t1 /* multiply by 0x101 */ + shd x2,0,24,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,16,t1 /* multiply by 0x10001 */ + shd x2,0,16,t2 + add x2,t2,x2 + addc x1,t1,x1 + MILLIRET + sub 0,x1,x1 + +/* DIVISION BY 12 (shift to divide by 4 then divide by 3) */ +GSYM($$divI_12) + .export $$divI_12,millicode + comb,< x2,0,LREF(neg12) + copy 0,x1 + extru x2,29,30,x2 /* divide by 4 */ + addib,tr 1,x2,LREF(pos) /* compute 5*(x2+1) = 5*x2+5 */ + sh2add x2,x2,x2 /* multiply by 5 to get started */ + +LSYM(neg12) + subi 4,x2,x2 /* negate, divide by 4, and add 1 */ + /* negation and adding 1 are done */ + /* at the same time by the SUBI */ + extru x2,29,30,x2 + b LREF(neg) + sh2add x2,x2,x2 /* multiply by 5 to get started */ + +GSYM($$divU_12) + .export $$divU_12,millicode + extru x2,29,30,x2 /* divide by 4 */ + addi 5,x2,t1 /* cannot carry */ + sh2add x2,t1,x2 /* multiply by 5 to get started */ + b LREF(pos) + addc 0,0,x1 + +/* DIVISION BY 15 (use z = 2**32; a = 11111111) */ +GSYM($$divI_15) + .export $$divI_15,millicode + comb,< x2,0,LREF(neg15) + copy 0,x1 + addib,tr 1,x2,LREF(pos)+4 + shd x1,x2,28,t1 + +LSYM(neg15) + b LREF(neg) + subi 1,x2,x2 + +GSYM($$divU_15) + .export $$divU_15,millicode + addi 1,x2,x2 /* this CAN overflow */ + b LREF(pos) + addc 0,0,x1 + +/* DIVISION BY 17 (use z = 2**32; a = f0f0f0f) */ +GSYM($$divI_17) + .export $$divI_17,millicode + comb,<,n x2,0,LREF(neg17) + addi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,28,t1 /* multiply by 0xf to get started */ + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(pos_for_17) + subb t1,0,x1 + +LSYM(neg17) + subi 1,x2,x2 /* this cannot overflow */ + shd 0,x2,28,t1 /* multiply by 0xf to get started */ + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(neg_for_17) + subb t1,0,x1 + +GSYM($$divU_17) + .export $$divU_17,millicode + addi 1,x2,x2 /* this CAN overflow */ + addc 0,0,x1 + shd x1,x2,28,t1 /* multiply by 0xf to get started */ +LSYM(u17) + shd x2,0,28,t2 + sub t2,x2,x2 + b LREF(pos_for_17) + subb t1,x1,x1 + + +/* DIVISION BY DIVISORS OF FFFFFF, and powers of 2 times these + includes 7,9 and also 14 + + + z = 2**24-1 + r = z mod x = 0 + + so choose b = 0 + + Also, in order to divide by z = 2**24-1, we approximate by dividing + by (z+1) = 2**24 (which is easy), and then correcting. + + (ax) = (z+1)q' + r + . = zq' + (q'+r) + + So to compute (ax)/z, compute q' = (ax)/(z+1) and r = (ax) mod (z+1) + Then the true remainder of (ax)/z is (q'+r). Repeat the process + with this new remainder, adding the tentative quotients together, + until a tentative quotient is 0 (and then we are done). There is + one last correction to be done. It is possible that (q'+r) = z. + If so, then (q'+r)/(z+1) = 0 and it looks like we are done. But, + in fact, we need to add 1 more to the quotient. Now, it turns + out that this happens if and only if the original value x is + an exact multiple of y. So, to avoid a three instruction test at + the end, instead use 1 instruction to add 1 to x at the beginning. */ + +/* DIVISION BY 7 (use z = 2**24-1; a = 249249) */ +GSYM($$divI_7) + .export $$divI_7,millicode + comb,<,n x2,0,LREF(neg7) +LSYM(7) + addi 1,x2,x2 /* cannot overflow */ + shd 0,x2,29,x1 + sh3add x2,x2,x2 + addc x1,0,x1 +LSYM(pos7) + shd x1,x2,26,t1 + shd x2,0,26,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,20,t1 + shd x2,0,20,t2 + add x2,t2,x2 + addc x1,t1,t1 + + /* computed <t1,x2>. Now divide it by (2**24 - 1) */ + + copy 0,x1 + shd,= t1,x2,24,t1 /* tentative quotient */ +LSYM(1) + addb,tr t1,x1,LREF(2) /* add to previous quotient */ + extru x2,31,24,x2 /* new remainder (unadjusted) */ + + MILLIRETN + +LSYM(2) + addb,tr t1,x2,LREF(1) /* adjust remainder */ + extru,= x2,7,8,t1 /* new quotient */ + +LSYM(neg7) + subi 1,x2,x2 /* negate x2 and add 1 */ +LSYM(8) + shd 0,x2,29,x1 + sh3add x2,x2,x2 + addc x1,0,x1 + +LSYM(neg7_shift) + shd x1,x2,26,t1 + shd x2,0,26,t2 + add x2,t2,x2 + addc x1,t1,x1 + + shd x1,x2,20,t1 + shd x2,0,20,t2 + add x2,t2,x2 + addc x1,t1,t1 + + /* computed <t1,x2>. Now divide it by (2**24 - 1) */ + + copy 0,x1 + shd,= t1,x2,24,t1 /* tentative quotient */ +LSYM(3) + addb,tr t1,x1,LREF(4) /* add to previous quotient */ + extru x2,31,24,x2 /* new remainder (unadjusted) */ + + MILLIRET + sub 0,x1,x1 /* negate result */ + +LSYM(4) + addb,tr t1,x2,LREF(3) /* adjust remainder */ + extru,= x2,7,8,t1 /* new quotient */ + +GSYM($$divU_7) + .export $$divU_7,millicode + addi 1,x2,x2 /* can carry */ + addc 0,0,x1 + shd x1,x2,29,t1 + sh3add x2,x2,x2 + b LREF(pos7) + addc t1,x1,x1 + +/* DIVISION BY 9 (use z = 2**24-1; a = 1c71c7) */ +GSYM($$divI_9) + .export $$divI_9,millicode + comb,<,n x2,0,LREF(neg9) + addi 1,x2,x2 /* cannot overflow */ + shd 0,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(pos7) + subb t1,0,x1 + +LSYM(neg9) + subi 1,x2,x2 /* negate and add 1 */ + shd 0,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(neg7_shift) + subb t1,0,x1 + +GSYM($$divU_9) + .export $$divU_9,millicode + addi 1,x2,x2 /* can carry */ + addc 0,0,x1 + shd x1,x2,29,t1 + shd x2,0,29,t2 + sub t2,x2,x2 + b LREF(pos7) + subb t1,x1,x1 + +/* DIVISION BY 14 (shift to divide by 2 then divide by 7) */ +GSYM($$divI_14) + .export $$divI_14,millicode + comb,<,n x2,0,LREF(neg14) +GSYM($$divU_14) + .export $$divU_14,millicode + b LREF(7) /* go to 7 case */ + extru x2,30,31,x2 /* divide by 2 */ + +LSYM(neg14) + subi 2,x2,x2 /* negate (and add 2) */ + b LREF(8) + extru x2,30,31,x2 /* divide by 2 */ + .exit + .procend + .end +#endif + +#ifdef L_mulI +/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */ +/****************************************************************************** +This routine is used on PA2.0 processors when gcc -mno-fpregs is used + +ROUTINE: $$mulI + + +DESCRIPTION: + + $$mulI multiplies two single word integers, giving a single + word result. + + +INPUT REGISTERS: + + arg0 = Operand 1 + arg1 = Operand 2 + r31 == return pc + sr0 == return space when called externally + + +OUTPUT REGISTERS: + + arg0 = undefined + arg1 = undefined + ret1 = result + +OTHER REGISTERS AFFECTED: + + r1 = undefined + +SIDE EFFECTS: + + Causes a trap under the following conditions: NONE + Changes memory at the following places: NONE + +PERMISSIBLE CONTEXT: + + Unwindable + Does not create a stack frame + Is usable for internal or external microcode + +DISCUSSION: + + Calls other millicode routines via mrp: NONE + Calls other millicode routines: NONE + +***************************************************************************/ + + +#define a0 %arg0 +#define a1 %arg1 +#define t0 %r1 +#define r %ret1 + +#define a0__128a0 zdep a0,24,25,a0 +#define a0__256a0 zdep a0,23,24,a0 +#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0) +#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1) +#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2) +#define b_n_ret_t0 b,n LREF(ret_t0) +#define b_e_shift b LREF(e_shift) +#define b_e_t0ma0 b LREF(e_t0ma0) +#define b_e_t0 b LREF(e_t0) +#define b_e_t0a0 b LREF(e_t0a0) +#define b_e_t02a0 b LREF(e_t02a0) +#define b_e_t04a0 b LREF(e_t04a0) +#define b_e_2t0 b LREF(e_2t0) +#define b_e_2t0a0 b LREF(e_2t0a0) +#define b_e_2t04a0 b LREF(e2t04a0) +#define b_e_3t0 b LREF(e_3t0) +#define b_e_4t0 b LREF(e_4t0) +#define b_e_4t0a0 b LREF(e_4t0a0) +#define b_e_4t08a0 b LREF(e4t08a0) +#define b_e_5t0 b LREF(e_5t0) +#define b_e_8t0 b LREF(e_8t0) +#define b_e_8t0a0 b LREF(e_8t0a0) +#define r__r_a0 add r,a0,r +#define r__r_2a0 sh1add a0,r,r +#define r__r_4a0 sh2add a0,r,r +#define r__r_8a0 sh3add a0,r,r +#define r__r_t0 add r,t0,r +#define r__r_2t0 sh1add t0,r,r +#define r__r_4t0 sh2add t0,r,r +#define r__r_8t0 sh3add t0,r,r +#define t0__3a0 sh1add a0,a0,t0 +#define t0__4a0 sh2add a0,0,t0 +#define t0__5a0 sh2add a0,a0,t0 +#define t0__8a0 sh3add a0,0,t0 +#define t0__9a0 sh3add a0,a0,t0 +#define t0__16a0 zdep a0,27,28,t0 +#define t0__32a0 zdep a0,26,27,t0 +#define t0__64a0 zdep a0,25,26,t0 +#define t0__128a0 zdep a0,24,25,t0 +#define t0__t0ma0 sub t0,a0,t0 +#define t0__t0_a0 add t0,a0,t0 +#define t0__t0_2a0 sh1add a0,t0,t0 +#define t0__t0_4a0 sh2add a0,t0,t0 +#define t0__t0_8a0 sh3add a0,t0,t0 +#define t0__2t0_a0 sh1add t0,a0,t0 +#define t0__3t0 sh1add t0,t0,t0 +#define t0__4t0 sh2add t0,0,t0 +#define t0__4t0_a0 sh2add t0,a0,t0 +#define t0__5t0 sh2add t0,t0,t0 +#define t0__8t0 sh3add t0,0,t0 +#define t0__8t0_a0 sh3add t0,a0,t0 +#define t0__9t0 sh3add t0,t0,t0 +#define t0__16t0 zdep t0,27,28,t0 +#define t0__32t0 zdep t0,26,27,t0 +#define t0__256a0 zdep a0,23,24,t0 + + + SUBSPA_MILLI + ATTR_MILLI + .align 16 + .proc + .callinfo millicode + .export $$mulI,millicode +GSYM($$mulI) + combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */ + copy 0,r /* zero out the result */ + xor a0,a1,a0 /* swap a0 & a1 using the */ + xor a0,a1,a1 /* old xor trick */ + xor a0,a1,a0 +LSYM(l4) + combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */ + zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */ + sub,> 0,a1,t0 /* otherwise negate both and */ + combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */ + sub 0,a0,a1 + movb,tr,n t0,a0,LREF(l2) /* 10th inst. */ + +LSYM(l0) r__r_t0 /* add in this partial product */ +LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */ +LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */ +LSYM(l3) blr t0,0 /* case on these 8 bits ****** */ + extru a1,23,24,a1 /* a1 >>= 8 ****************** */ + +/*16 insts before this. */ +/* a0 <<= 8 ************************** */ +LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop +LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop +LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop +LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0 +LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop +LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0 +LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0 +LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop +LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0 +LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0 +LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0 +LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0 +LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0 +LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0 +LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0 +LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0 +LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0 +LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0 +LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0 +LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0 +LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0 +LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0 +LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0 +LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0 +LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0 +LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0 +LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0 +LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0 +LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0 +LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0 +LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0 +LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0 +LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0 +LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0 +LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0 +LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0 +LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0 +LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0 +LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0 +LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0 +LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0 +LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0 +LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0 +LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0 +LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0 +LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0 +LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0 +LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0 +LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0 +LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0 +LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0 +LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0 +LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0 +LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0 +LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0 +LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0 +LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0 +LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0 +LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0 +LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0 +LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0 +LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0 +LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0 +LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0 +LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0 +LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0 +LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0 +LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0 +LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0 +LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0 +LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0 +LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0 +LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0 +LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0 +LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0 +LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0 +LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0 +LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0 +LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0 +LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0 +LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0 +LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0 +LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0 +LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0 +LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0 +LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0 +LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0 +LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0 +LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0 +LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0 +LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0 +LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0 +LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0 +LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0 +LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0 +LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0 +LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0 +LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0 +LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0 +LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +/*1040 insts before this. */ +LSYM(ret_t0) MILLIRET +LSYM(e_t0) r__r_t0 +LSYM(e_shift) a1_ne_0_b_l2 + a0__256a0 /* a0 <<= 8 *********** */ + MILLIRETN +LSYM(e_t0ma0) a1_ne_0_b_l0 + t0__t0ma0 + MILLIRET + r__r_t0 +LSYM(e_t0a0) a1_ne_0_b_l0 + t0__t0_a0 + MILLIRET + r__r_t0 +LSYM(e_t02a0) a1_ne_0_b_l0 + t0__t0_2a0 + MILLIRET + r__r_t0 +LSYM(e_t04a0) a1_ne_0_b_l0 + t0__t0_4a0 + MILLIRET + r__r_t0 +LSYM(e_2t0) a1_ne_0_b_l1 + r__r_2t0 + MILLIRETN +LSYM(e_2t0a0) a1_ne_0_b_l0 + t0__2t0_a0 + MILLIRET + r__r_t0 +LSYM(e2t04a0) t0__t0_2a0 + a1_ne_0_b_l1 + r__r_2t0 + MILLIRETN +LSYM(e_3t0) a1_ne_0_b_l0 + t0__3t0 + MILLIRET + r__r_t0 +LSYM(e_4t0) a1_ne_0_b_l1 + r__r_4t0 + MILLIRETN +LSYM(e_4t0a0) a1_ne_0_b_l0 + t0__4t0_a0 + MILLIRET + r__r_t0 +LSYM(e4t08a0) t0__t0_2a0 + a1_ne_0_b_l1 + r__r_4t0 + MILLIRETN +LSYM(e_5t0) a1_ne_0_b_l0 + t0__5t0 + MILLIRET + r__r_t0 +LSYM(e_8t0) a1_ne_0_b_l1 + r__r_8t0 + MILLIRETN +LSYM(e_8t0a0) a1_ne_0_b_l0 + t0__8t0_a0 + MILLIRET + r__r_t0 + + .procend + .end +#endif diff --git a/arch/parisc/lib/milli/milli.h b/arch/parisc/lib/milli/milli.h new file mode 100644 index 00000000000..19ac79f336d --- /dev/null +++ b/arch/parisc/lib/milli/milli.h @@ -0,0 +1,165 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#ifndef _PA_MILLI_H_ +#define _PA_MILLI_H_ + +#define L_dyncall +#define L_divI +#define L_divU +#define L_remI +#define L_remU +#define L_div_const +#define L_mulI + +#ifdef CONFIG_64BIT + .level 2.0w +#endif + +/* Hardware General Registers. */ +r0: .reg %r0 +r1: .reg %r1 +r2: .reg %r2 +r3: .reg %r3 +r4: .reg %r4 +r5: .reg %r5 +r6: .reg %r6 +r7: .reg %r7 +r8: .reg %r8 +r9: .reg %r9 +r10: .reg %r10 +r11: .reg %r11 +r12: .reg %r12 +r13: .reg %r13 +r14: .reg %r14 +r15: .reg %r15 +r16: .reg %r16 +r17: .reg %r17 +r18: .reg %r18 +r19: .reg %r19 +r20: .reg %r20 +r21: .reg %r21 +r22: .reg %r22 +r23: .reg %r23 +r24: .reg %r24 +r25: .reg %r25 +r26: .reg %r26 +r27: .reg %r27 +r28: .reg %r28 +r29: .reg %r29 +r30: .reg %r30 +r31: .reg %r31 + +/* Hardware Space Registers. */ +sr0: .reg %sr0 +sr1: .reg %sr1 +sr2: .reg %sr2 +sr3: .reg %sr3 +sr4: .reg %sr4 +sr5: .reg %sr5 +sr6: .reg %sr6 +sr7: .reg %sr7 + +/* Hardware Floating Point Registers. */ +fr0: .reg %fr0 +fr1: .reg %fr1 +fr2: .reg %fr2 +fr3: .reg %fr3 +fr4: .reg %fr4 +fr5: .reg %fr5 +fr6: .reg %fr6 +fr7: .reg %fr7 +fr8: .reg %fr8 +fr9: .reg %fr9 +fr10: .reg %fr10 +fr11: .reg %fr11 +fr12: .reg %fr12 +fr13: .reg %fr13 +fr14: .reg %fr14 +fr15: .reg %fr15 + +/* Hardware Control Registers. */ +cr11: .reg %cr11 +sar: .reg %cr11 /* Shift Amount Register */ + +/* Software Architecture General Registers. */ +rp: .reg r2 /* return pointer */ +#ifdef CONFIG_64BIT +mrp: .reg r2 /* millicode return pointer */ +#else +mrp: .reg r31 /* millicode return pointer */ +#endif +ret0: .reg r28 /* return value */ +ret1: .reg r29 /* return value (high part of double) */ +sp: .reg r30 /* stack pointer */ +dp: .reg r27 /* data pointer */ +arg0: .reg r26 /* argument */ +arg1: .reg r25 /* argument or high part of double argument */ +arg2: .reg r24 /* argument */ +arg3: .reg r23 /* argument or high part of double argument */ + +/* Software Architecture Space Registers. */ +/* sr0 ; return link from BLE */ +sret: .reg sr1 /* return value */ +sarg: .reg sr1 /* argument */ +/* sr4 ; PC SPACE tracker */ +/* sr5 ; process private data */ + +/* Frame Offsets (millicode convention!) Used when calling other + millicode routines. Stack unwinding is dependent upon these + definitions. */ +r31_slot: .equ -20 /* "current RP" slot */ +sr0_slot: .equ -16 /* "static link" slot */ +#if defined(CONFIG_64BIT) +mrp_slot: .equ -16 /* "current RP" slot */ +psp_slot: .equ -8 /* "previous SP" slot */ +#else +mrp_slot: .equ -20 /* "current RP" slot (replacing "r31_slot") */ +#endif + + +#define DEFINE(name,value)name: .EQU value +#define RDEFINE(name,value)name: .REG value +#ifdef milliext +#define MILLI_BE(lbl) BE lbl(sr7,r0) +#define MILLI_BEN(lbl) BE,n lbl(sr7,r0) +#define MILLI_BLE(lbl) BLE lbl(sr7,r0) +#define MILLI_BLEN(lbl) BLE,n lbl(sr7,r0) +#define MILLIRETN BE,n 0(sr0,mrp) +#define MILLIRET BE 0(sr0,mrp) +#define MILLI_RETN BE,n 0(sr0,mrp) +#define MILLI_RET BE 0(sr0,mrp) +#else +#define MILLI_BE(lbl) B lbl +#define MILLI_BEN(lbl) B,n lbl +#define MILLI_BLE(lbl) BL lbl,mrp +#define MILLI_BLEN(lbl) BL,n lbl,mrp +#define MILLIRETN BV,n 0(mrp) +#define MILLIRET BV 0(mrp) +#define MILLI_RETN BV,n 0(mrp) +#define MILLI_RET BV 0(mrp) +#endif + +#define CAT(a,b) a##b + +#define SUBSPA_MILLI .section .text +#define SUBSPA_MILLI_DIV .section .text.div,"ax",@progbits! .align 16 +#define SUBSPA_MILLI_MUL .section .text.mul,"ax",@progbits! .align 16 +#define ATTR_MILLI +#define SUBSPA_DATA .section .data +#define ATTR_DATA +#define GLOBAL $global$ +#define GSYM(sym) !sym: +#define LSYM(sym) !CAT(.L,sym:) +#define LREF(sym) CAT(.L,sym) + +#endif /*_PA_MILLI_H_*/ diff --git a/arch/parisc/lib/milli/mulI.S b/arch/parisc/lib/milli/mulI.S new file mode 100644 index 00000000000..4c7e0c36d15 --- /dev/null +++ b/arch/parisc/lib/milli/mulI.S @@ -0,0 +1,474 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_mulI +/* VERSION "@(#)$$mulI $ Revision: 12.4 $ $ Date: 94/03/17 17:18:51 $" */ +/****************************************************************************** +This routine is used on PA2.0 processors when gcc -mno-fpregs is used + +ROUTINE: $$mulI + + +DESCRIPTION: + + $$mulI multiplies two single word integers, giving a single + word result. + + +INPUT REGISTERS: + + arg0 = Operand 1 + arg1 = Operand 2 + r31 == return pc + sr0 == return space when called externally + + +OUTPUT REGISTERS: + + arg0 = undefined + arg1 = undefined + ret1 = result + +OTHER REGISTERS AFFECTED: + + r1 = undefined + +SIDE EFFECTS: + + Causes a trap under the following conditions: NONE + Changes memory at the following places: NONE + +PERMISSIBLE CONTEXT: + + Unwindable + Does not create a stack frame + Is usable for internal or external microcode + +DISCUSSION: + + Calls other millicode routines via mrp: NONE + Calls other millicode routines: NONE + +***************************************************************************/ + + +#define a0 %arg0 +#define a1 %arg1 +#define t0 %r1 +#define r %ret1 + +#define a0__128a0 zdep a0,24,25,a0 +#define a0__256a0 zdep a0,23,24,a0 +#define a1_ne_0_b_l0 comb,<> a1,0,LREF(l0) +#define a1_ne_0_b_l1 comb,<> a1,0,LREF(l1) +#define a1_ne_0_b_l2 comb,<> a1,0,LREF(l2) +#define b_n_ret_t0 b,n LREF(ret_t0) +#define b_e_shift b LREF(e_shift) +#define b_e_t0ma0 b LREF(e_t0ma0) +#define b_e_t0 b LREF(e_t0) +#define b_e_t0a0 b LREF(e_t0a0) +#define b_e_t02a0 b LREF(e_t02a0) +#define b_e_t04a0 b LREF(e_t04a0) +#define b_e_2t0 b LREF(e_2t0) +#define b_e_2t0a0 b LREF(e_2t0a0) +#define b_e_2t04a0 b LREF(e2t04a0) +#define b_e_3t0 b LREF(e_3t0) +#define b_e_4t0 b LREF(e_4t0) +#define b_e_4t0a0 b LREF(e_4t0a0) +#define b_e_4t08a0 b LREF(e4t08a0) +#define b_e_5t0 b LREF(e_5t0) +#define b_e_8t0 b LREF(e_8t0) +#define b_e_8t0a0 b LREF(e_8t0a0) +#define r__r_a0 add r,a0,r +#define r__r_2a0 sh1add a0,r,r +#define r__r_4a0 sh2add a0,r,r +#define r__r_8a0 sh3add a0,r,r +#define r__r_t0 add r,t0,r +#define r__r_2t0 sh1add t0,r,r +#define r__r_4t0 sh2add t0,r,r +#define r__r_8t0 sh3add t0,r,r +#define t0__3a0 sh1add a0,a0,t0 +#define t0__4a0 sh2add a0,0,t0 +#define t0__5a0 sh2add a0,a0,t0 +#define t0__8a0 sh3add a0,0,t0 +#define t0__9a0 sh3add a0,a0,t0 +#define t0__16a0 zdep a0,27,28,t0 +#define t0__32a0 zdep a0,26,27,t0 +#define t0__64a0 zdep a0,25,26,t0 +#define t0__128a0 zdep a0,24,25,t0 +#define t0__t0ma0 sub t0,a0,t0 +#define t0__t0_a0 add t0,a0,t0 +#define t0__t0_2a0 sh1add a0,t0,t0 +#define t0__t0_4a0 sh2add a0,t0,t0 +#define t0__t0_8a0 sh3add a0,t0,t0 +#define t0__2t0_a0 sh1add t0,a0,t0 +#define t0__3t0 sh1add t0,t0,t0 +#define t0__4t0 sh2add t0,0,t0 +#define t0__4t0_a0 sh2add t0,a0,t0 +#define t0__5t0 sh2add t0,t0,t0 +#define t0__8t0 sh3add t0,0,t0 +#define t0__8t0_a0 sh3add t0,a0,t0 +#define t0__9t0 sh3add t0,t0,t0 +#define t0__16t0 zdep t0,27,28,t0 +#define t0__32t0 zdep t0,26,27,t0 +#define t0__256a0 zdep a0,23,24,t0 + + + SUBSPA_MILLI + ATTR_MILLI + .align 16 + .proc + .callinfo millicode + .export $$mulI,millicode +GSYM($$mulI) + combt,<<= a1,a0,LREF(l4) /* swap args if unsigned a1>a0 */ + copy 0,r /* zero out the result */ + xor a0,a1,a0 /* swap a0 & a1 using the */ + xor a0,a1,a1 /* old xor trick */ + xor a0,a1,a0 +LSYM(l4) + combt,<= 0,a0,LREF(l3) /* if a0>=0 then proceed like unsigned */ + zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */ + sub,> 0,a1,t0 /* otherwise negate both and */ + combt,<=,n a0,t0,LREF(l2) /* swap back if |a0|<|a1| */ + sub 0,a0,a1 + movb,tr,n t0,a0,LREF(l2) /* 10th inst. */ + +LSYM(l0) r__r_t0 /* add in this partial product */ +LSYM(l1) a0__256a0 /* a0 <<= 8 ****************** */ +LSYM(l2) zdep a1,30,8,t0 /* t0 = (a1&0xff)<<1 ********* */ +LSYM(l3) blr t0,0 /* case on these 8 bits ****** */ + extru a1,23,24,a1 /* a1 >>= 8 ****************** */ + +/*16 insts before this. */ +/* a0 <<= 8 ************************** */ +LSYM(x0) a1_ne_0_b_l2 ! a0__256a0 ! MILLIRETN ! nop +LSYM(x1) a1_ne_0_b_l1 ! r__r_a0 ! MILLIRETN ! nop +LSYM(x2) a1_ne_0_b_l1 ! r__r_2a0 ! MILLIRETN ! nop +LSYM(x3) a1_ne_0_b_l0 ! t0__3a0 ! MILLIRET ! r__r_t0 +LSYM(x4) a1_ne_0_b_l1 ! r__r_4a0 ! MILLIRETN ! nop +LSYM(x5) a1_ne_0_b_l0 ! t0__5a0 ! MILLIRET ! r__r_t0 +LSYM(x6) t0__3a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x7) t0__3a0 ! a1_ne_0_b_l0 ! r__r_4a0 ! b_n_ret_t0 +LSYM(x8) a1_ne_0_b_l1 ! r__r_8a0 ! MILLIRETN ! nop +LSYM(x9) a1_ne_0_b_l0 ! t0__9a0 ! MILLIRET ! r__r_t0 +LSYM(x10) t0__5a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x11) t0__3a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0 +LSYM(x12) t0__3a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x13) t0__5a0 ! a1_ne_0_b_l0 ! r__r_8a0 ! b_n_ret_t0 +LSYM(x14) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x15) t0__5a0 ! a1_ne_0_b_l0 ! t0__3t0 ! b_n_ret_t0 +LSYM(x16) t0__16a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x17) t0__9a0 ! a1_ne_0_b_l0 ! t0__t0_8a0 ! b_n_ret_t0 +LSYM(x18) t0__9a0 ! a1_ne_0_b_l1 ! r__r_2t0 ! MILLIRETN +LSYM(x19) t0__9a0 ! a1_ne_0_b_l0 ! t0__2t0_a0 ! b_n_ret_t0 +LSYM(x20) t0__5a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x21) t0__5a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x22) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x23) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x24) t0__3a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x25) t0__5a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0 +LSYM(x26) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x27) t0__3a0 ! a1_ne_0_b_l0 ! t0__9t0 ! b_n_ret_t0 +LSYM(x28) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x29) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x30) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_2t0 +LSYM(x31) t0__32a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x32) t0__32a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x33) t0__8a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x34) t0__16a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x35) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__t0_8a0 +LSYM(x36) t0__9a0 ! a1_ne_0_b_l1 ! r__r_4t0 ! MILLIRETN +LSYM(x37) t0__9a0 ! a1_ne_0_b_l0 ! t0__4t0_a0 ! b_n_ret_t0 +LSYM(x38) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x39) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x40) t0__5a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x41) t0__5a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0 +LSYM(x42) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x43) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x44) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x45) t0__9a0 ! a1_ne_0_b_l0 ! t0__5t0 ! b_n_ret_t0 +LSYM(x46) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_a0 +LSYM(x47) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x48) t0__3a0 ! a1_ne_0_b_l0 ! t0__16t0 ! b_n_ret_t0 +LSYM(x49) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__t0_4a0 +LSYM(x50) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_2t0 +LSYM(x51) t0__9a0 ! t0__t0_8a0 ! b_e_t0 ! t0__3t0 +LSYM(x52) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x53) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x54) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_2t0 +LSYM(x55) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x56) t0__3a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x57) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x58) t0__3a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x59) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x60) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x61) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x62) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x63) t0__64a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x64) t0__64a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x65) t0__8a0 ! a1_ne_0_b_l0 ! t0__8t0_a0 ! b_n_ret_t0 +LSYM(x66) t0__32a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x67) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x68) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x69) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x70) t0__64a0 ! t0__t0_4a0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x71) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x72) t0__9a0 ! a1_ne_0_b_l1 ! r__r_8t0 ! MILLIRETN +LSYM(x73) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_t0 +LSYM(x74) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x75) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x76) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x77) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x78) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x79) t0__16a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x80) t0__16a0 ! t0__5t0 ! b_e_shift ! r__r_t0 +LSYM(x81) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_t0 +LSYM(x82) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x83) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x84) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x85) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x86) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x87) t0__9a0 ! t0__9t0 ! b_e_t02a0 ! t0__t0_4a0 +LSYM(x88) t0__5a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x89) t0__5a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x90) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_2t0 +LSYM(x91) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x92) t0__5a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x93) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__3t0 +LSYM(x94) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__t0_2a0 +LSYM(x95) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x96) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x97) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x98) t0__32a0 ! t0__3t0 ! b_e_t0 ! t0__t0_2a0 +LSYM(x99) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x100) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_4t0 +LSYM(x101) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x102) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0 +LSYM(x103) t0__5a0 ! t0__5t0 ! b_e_t02a0 ! t0__4t0_a0 +LSYM(x104) t0__3a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x105) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x106) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x107) t0__9a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__8t0_a0 +LSYM(x108) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_4t0 +LSYM(x109) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x110) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x111) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x112) t0__3a0 ! t0__2t0_a0 ! b_e_t0 ! t0__16t0 +LSYM(x113) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x114) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x115) t0__9a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x116) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x117) t0__3a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x118) t0__3a0 ! t0__4t0_a0 ! b_e_t0a0 ! t0__9t0 +LSYM(x119) t0__3a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__9t0 +LSYM(x120) t0__5a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x121) t0__5a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x122) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x123) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x124) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0 +LSYM(x125) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__5t0 +LSYM(x126) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x127) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +LSYM(x128) t0__128a0 ! a1_ne_0_b_l1 ! r__r_t0 ! MILLIRETN +LSYM(x129) t0__128a0 ! a1_ne_0_b_l0 ! t0__t0_a0 ! b_n_ret_t0 +LSYM(x130) t0__64a0 ! t0__t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x131) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x132) t0__8a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x133) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x134) t0__8a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x135) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__3t0 +LSYM(x136) t0__8a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x137) t0__8a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x138) t0__8a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x139) t0__8a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__4t0_a0 +LSYM(x140) t0__3a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__5t0 +LSYM(x141) t0__8a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x142) t0__9a0 ! t0__8t0 ! b_e_2t0 ! t0__t0ma0 +LSYM(x143) t0__16a0 ! t0__9t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x144) t0__9a0 ! t0__8t0 ! b_e_shift ! r__r_2t0 +LSYM(x145) t0__9a0 ! t0__8t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x146) t0__9a0 ! t0__8t0_a0 ! b_e_shift ! r__r_2t0 +LSYM(x147) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x148) t0__9a0 ! t0__4t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x149) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x150) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x151) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x152) t0__9a0 ! t0__2t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x153) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x154) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x155) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__5t0 +LSYM(x156) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x157) t0__32a0 ! t0__t0ma0 ! b_e_t02a0 ! t0__5t0 +LSYM(x158) t0__16a0 ! t0__5t0 ! b_e_2t0 ! t0__t0ma0 +LSYM(x159) t0__32a0 ! t0__5t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x160) t0__5a0 ! t0__4t0 ! b_e_shift ! r__r_8t0 +LSYM(x161) t0__8a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x162) t0__9a0 ! t0__9t0 ! b_e_shift ! r__r_2t0 +LSYM(x163) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__2t0_a0 +LSYM(x164) t0__5a0 ! t0__8t0_a0 ! b_e_shift ! r__r_4t0 +LSYM(x165) t0__8a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x166) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x167) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x168) t0__5a0 ! t0__4t0_a0 ! b_e_shift ! r__r_8t0 +LSYM(x169) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x170) t0__32a0 ! t0__t0_2a0 ! b_e_t0 ! t0__5t0 +LSYM(x171) t0__9a0 ! t0__2t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x172) t0__5a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x173) t0__9a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__9t0 +LSYM(x174) t0__32a0 ! t0__t0_2a0 ! b_e_t04a0 ! t0__5t0 +LSYM(x175) t0__8a0 ! t0__2t0_a0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x176) t0__5a0 ! t0__4t0_a0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x177) t0__5a0 ! t0__4t0_a0 ! b_e_8t0a0 ! t0__t0_a0 +LSYM(x178) t0__5a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__8t0_a0 +LSYM(x179) t0__5a0 ! t0__2t0_a0 ! b_e_2t0a0 ! t0__8t0_a0 +LSYM(x180) t0__9a0 ! t0__5t0 ! b_e_shift ! r__r_4t0 +LSYM(x181) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x182) t0__9a0 ! t0__5t0 ! b_e_2t0 ! t0__2t0_a0 +LSYM(x183) t0__9a0 ! t0__5t0 ! b_e_2t0a0 ! t0__2t0_a0 +LSYM(x184) t0__5a0 ! t0__9t0 ! b_e_4t0 ! t0__t0_a0 +LSYM(x185) t0__9a0 ! t0__4t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x186) t0__32a0 ! t0__t0ma0 ! b_e_2t0 ! t0__3t0 +LSYM(x187) t0__9a0 ! t0__4t0_a0 ! b_e_t02a0 ! t0__5t0 +LSYM(x188) t0__9a0 ! t0__5t0 ! b_e_4t0 ! t0__t0_2a0 +LSYM(x189) t0__5a0 ! t0__4t0_a0 ! b_e_t0 ! t0__9t0 +LSYM(x190) t0__9a0 ! t0__2t0_a0 ! b_e_2t0 ! t0__5t0 +LSYM(x191) t0__64a0 ! t0__3t0 ! b_e_t0 ! t0__t0ma0 +LSYM(x192) t0__8a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x193) t0__8a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x194) t0__8a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x195) t0__8a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x196) t0__8a0 ! t0__3t0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x197) t0__8a0 ! t0__3t0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x198) t0__64a0 ! t0__t0_2a0 ! b_e_t0 ! t0__3t0 +LSYM(x199) t0__8a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x200) t0__5a0 ! t0__5t0 ! b_e_shift ! r__r_8t0 +LSYM(x201) t0__5a0 ! t0__5t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x202) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x203) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__4t0_a0 +LSYM(x204) t0__8a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0 +LSYM(x205) t0__5a0 ! t0__8t0_a0 ! b_e_t0 ! t0__5t0 +LSYM(x206) t0__64a0 ! t0__t0_4a0 ! b_e_t02a0 ! t0__3t0 +LSYM(x207) t0__8a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0 +LSYM(x208) t0__5a0 ! t0__5t0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x209) t0__5a0 ! t0__5t0 ! b_e_8t0a0 ! t0__t0_a0 +LSYM(x210) t0__5a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__5t0 +LSYM(x211) t0__5a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__5t0 +LSYM(x212) t0__3a0 ! t0__4t0_a0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x213) t0__3a0 ! t0__4t0_a0 ! b_e_4t0a0 ! t0__4t0_a0 +LSYM(x214) t0__9a0 ! t0__t0_4a0 ! b_e_2t04a0 ! t0__8t0_a0 +LSYM(x215) t0__5a0 ! t0__4t0_a0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x216) t0__9a0 ! t0__3t0 ! b_e_shift ! r__r_8t0 +LSYM(x217) t0__9a0 ! t0__3t0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x218) t0__9a0 ! t0__3t0 ! b_e_2t0 ! t0__4t0_a0 +LSYM(x219) t0__9a0 ! t0__8t0_a0 ! b_e_t0 ! t0__3t0 +LSYM(x220) t0__3a0 ! t0__9t0 ! b_e_4t0 ! t0__2t0_a0 +LSYM(x221) t0__3a0 ! t0__9t0 ! b_e_4t0a0 ! t0__2t0_a0 +LSYM(x222) t0__9a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x223) t0__9a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x224) t0__9a0 ! t0__3t0 ! b_e_8t0 ! t0__t0_a0 +LSYM(x225) t0__9a0 ! t0__5t0 ! b_e_t0 ! t0__5t0 +LSYM(x226) t0__3a0 ! t0__2t0_a0 ! b_e_t02a0 ! t0__32t0 +LSYM(x227) t0__9a0 ! t0__5t0 ! b_e_t02a0 ! t0__5t0 +LSYM(x228) t0__9a0 ! t0__2t0_a0 ! b_e_4t0 ! t0__3t0 +LSYM(x229) t0__9a0 ! t0__2t0_a0 ! b_e_4t0a0 ! t0__3t0 +LSYM(x230) t0__9a0 ! t0__5t0 ! b_e_5t0 ! t0__t0_a0 +LSYM(x231) t0__9a0 ! t0__2t0_a0 ! b_e_3t0 ! t0__4t0_a0 +LSYM(x232) t0__3a0 ! t0__2t0_a0 ! b_e_8t0 ! t0__4t0_a0 +LSYM(x233) t0__3a0 ! t0__2t0_a0 ! b_e_8t0a0 ! t0__4t0_a0 +LSYM(x234) t0__3a0 ! t0__4t0_a0 ! b_e_2t0 ! t0__9t0 +LSYM(x235) t0__3a0 ! t0__4t0_a0 ! b_e_2t0a0 ! t0__9t0 +LSYM(x236) t0__9a0 ! t0__2t0_a0 ! b_e_4t08a0 ! t0__3t0 +LSYM(x237) t0__16a0 ! t0__5t0 ! b_e_3t0 ! t0__t0ma0 +LSYM(x238) t0__3a0 ! t0__4t0_a0 ! b_e_2t04a0 ! t0__9t0 +LSYM(x239) t0__16a0 ! t0__5t0 ! b_e_t0ma0 ! t0__3t0 +LSYM(x240) t0__9a0 ! t0__t0_a0 ! b_e_8t0 ! t0__3t0 +LSYM(x241) t0__9a0 ! t0__t0_a0 ! b_e_8t0a0 ! t0__3t0 +LSYM(x242) t0__5a0 ! t0__3t0 ! b_e_2t0 ! t0__8t0_a0 +LSYM(x243) t0__9a0 ! t0__9t0 ! b_e_t0 ! t0__3t0 +LSYM(x244) t0__5a0 ! t0__3t0 ! b_e_4t0 ! t0__4t0_a0 +LSYM(x245) t0__8a0 ! t0__3t0 ! b_e_5t0 ! t0__2t0_a0 +LSYM(x246) t0__5a0 ! t0__8t0_a0 ! b_e_2t0 ! t0__3t0 +LSYM(x247) t0__5a0 ! t0__8t0_a0 ! b_e_2t0a0 ! t0__3t0 +LSYM(x248) t0__32a0 ! t0__t0ma0 ! b_e_shift ! r__r_8t0 +LSYM(x249) t0__32a0 ! t0__t0ma0 ! b_e_t0 ! t0__8t0_a0 +LSYM(x250) t0__5a0 ! t0__5t0 ! b_e_2t0 ! t0__5t0 +LSYM(x251) t0__5a0 ! t0__5t0 ! b_e_2t0a0 ! t0__5t0 +LSYM(x252) t0__64a0 ! t0__t0ma0 ! b_e_shift ! r__r_4t0 +LSYM(x253) t0__64a0 ! t0__t0ma0 ! b_e_t0 ! t0__4t0_a0 +LSYM(x254) t0__128a0 ! t0__t0ma0 ! b_e_shift ! r__r_2t0 +LSYM(x255) t0__256a0 ! a1_ne_0_b_l0 ! t0__t0ma0 ! b_n_ret_t0 +/*1040 insts before this. */ +LSYM(ret_t0) MILLIRET +LSYM(e_t0) r__r_t0 +LSYM(e_shift) a1_ne_0_b_l2 + a0__256a0 /* a0 <<= 8 *********** */ + MILLIRETN +LSYM(e_t0ma0) a1_ne_0_b_l0 + t0__t0ma0 + MILLIRET + r__r_t0 +LSYM(e_t0a0) a1_ne_0_b_l0 + t0__t0_a0 + MILLIRET + r__r_t0 +LSYM(e_t02a0) a1_ne_0_b_l0 + t0__t0_2a0 + MILLIRET + r__r_t0 +LSYM(e_t04a0) a1_ne_0_b_l0 + t0__t0_4a0 + MILLIRET + r__r_t0 +LSYM(e_2t0) a1_ne_0_b_l1 + r__r_2t0 + MILLIRETN +LSYM(e_2t0a0) a1_ne_0_b_l0 + t0__2t0_a0 + MILLIRET + r__r_t0 +LSYM(e2t04a0) t0__t0_2a0 + a1_ne_0_b_l1 + r__r_2t0 + MILLIRETN +LSYM(e_3t0) a1_ne_0_b_l0 + t0__3t0 + MILLIRET + r__r_t0 +LSYM(e_4t0) a1_ne_0_b_l1 + r__r_4t0 + MILLIRETN +LSYM(e_4t0a0) a1_ne_0_b_l0 + t0__4t0_a0 + MILLIRET + r__r_t0 +LSYM(e4t08a0) t0__t0_2a0 + a1_ne_0_b_l1 + r__r_4t0 + MILLIRETN +LSYM(e_5t0) a1_ne_0_b_l0 + t0__5t0 + MILLIRET + r__r_t0 +LSYM(e_8t0) a1_ne_0_b_l1 + r__r_8t0 + MILLIRETN +LSYM(e_8t0a0) a1_ne_0_b_l0 + t0__8t0_a0 + MILLIRET + r__r_t0 + + .procend + .end +#endif diff --git a/arch/parisc/lib/milli/remI.S b/arch/parisc/lib/milli/remI.S new file mode 100644 index 00000000000..63bc094471e --- /dev/null +++ b/arch/parisc/lib/milli/remI.S @@ -0,0 +1,185 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_remI +/* ROUTINE: $$remI + + DESCRIPTION: + . $$remI returns the remainder of the division of two signed 32-bit + . integers. The sign of the remainder is the same as the sign of + . the dividend. + + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = destroyed + . arg1 = destroyed + . ret1 = remainder + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: DIVIDE BY ZERO + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable + . Does not create a stack frame + . Is usable for internal or external microcode + + DISCUSSION: + . Calls other millicode routines via mrp: NONE + . Calls other millicode routines: NONE */ + +RDEFINE(tmp,r1) +RDEFINE(retreg,ret1) + + SUBSPA_MILLI + ATTR_MILLI + .proc + .callinfo millicode + .entry +GSYM($$remI) +GSYM($$remoI) + .export $$remI,MILLICODE + .export $$remoI,MILLICODE + ldo -1(arg1),tmp /* is there at most one bit set ? */ + and,<> arg1,tmp,r0 /* if not, don't use power of 2 */ + addi,> 0,arg1,r0 /* if denominator > 0, use power */ + /* of 2 */ + b,n LREF(neg_denom) +LSYM(pow2) + comb,>,n 0,arg0,LREF(neg_num) /* is numerator < 0 ? */ + and arg0,tmp,retreg /* get the result */ + MILLIRETN +LSYM(neg_num) + subi 0,arg0,arg0 /* negate numerator */ + and arg0,tmp,retreg /* get the result */ + subi 0,retreg,retreg /* negate result */ + MILLIRETN +LSYM(neg_denom) + addi,< 0,arg1,r0 /* if arg1 >= 0, it's not power */ + /* of 2 */ + b,n LREF(regular_seq) + sub r0,arg1,tmp /* make denominator positive */ + comb,=,n arg1,tmp,LREF(regular_seq) /* test against 0x80000000 and 0 */ + ldo -1(tmp),retreg /* is there at most one bit set ? */ + and,= tmp,retreg,r0 /* if not, go to regular_seq */ + b,n LREF(regular_seq) + comb,>,n 0,arg0,LREF(neg_num_2) /* if arg0 < 0, negate it */ + and arg0,retreg,retreg + MILLIRETN +LSYM(neg_num_2) + subi 0,arg0,tmp /* test against 0x80000000 */ + and tmp,retreg,retreg + subi 0,retreg,retreg + MILLIRETN +LSYM(regular_seq) + addit,= 0,arg1,0 /* trap if div by zero */ + add,>= 0,arg0,retreg /* move dividend, if retreg < 0, */ + sub 0,retreg,retreg /* make it positive */ + sub 0,arg1, tmp /* clear carry, */ + /* negate the divisor */ + ds 0, tmp,0 /* set V-bit to the comple- */ + /* ment of the divisor sign */ + or 0,0, tmp /* clear tmp */ + add retreg,retreg,retreg /* shift msb bit into carry */ + ds tmp,arg1, tmp /* 1st divide step, if no carry */ + /* out, msb of quotient = 0 */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ +LSYM(t1) + ds tmp,arg1, tmp /* 2nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 3rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 4th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 5th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 6th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 7th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 8th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 9th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 10th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 11th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 12th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 13th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 14th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 15th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 16th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 17th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 18th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 19th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 20th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 21st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 22nd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 23rd divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 24th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 25th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 26th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 27th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 28th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 29th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 30th divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 31st divide step */ + addc retreg,retreg,retreg /* shift retreg with/into carry */ + ds tmp,arg1, tmp /* 32nd divide step, */ + addc retreg,retreg,retreg /* shift last bit into retreg */ + movb,>=,n tmp,retreg,LREF(finish) /* branch if pos. tmp */ + add,< arg1,0,0 /* if arg1 > 0, add arg1 */ + add,tr tmp,arg1,retreg /* for correcting remainder tmp */ + sub tmp,arg1,retreg /* else add absolute value arg1 */ +LSYM(finish) + add,>= arg0,0,0 /* set sign of remainder */ + sub 0,retreg,retreg /* to sign of dividend */ + MILLIRET + nop + .exit + .procend +#ifdef milliext + .origin 0x00000200 +#endif + .end +#endif diff --git a/arch/parisc/lib/milli/remU.S b/arch/parisc/lib/milli/remU.S new file mode 100644 index 00000000000..c0a2d6e247c --- /dev/null +++ b/arch/parisc/lib/milli/remU.S @@ -0,0 +1,148 @@ +/* 32 and 64-bit millicode, original author Hewlett-Packard + adapted for gcc by Paul Bame <bame@debian.org> + and Alan Modra <alan@linuxcare.com.au>. + + Copyright 2001, 2002, 2003 Free Software Foundation, Inc. + + This file is part of GCC and is released under the terms of + of the GNU General Public License as published by the Free Software + Foundation; either version 2, or (at your option) any later version. + See the file COPYING in the top-level GCC source directory for a copy + of the license. */ + +#include "milli.h" + +#ifdef L_remU +/* ROUTINE: $$remU + . Single precision divide for remainder with unsigned binary integers. + . + . The remainder must be dividend-(dividend/divisor)*divisor. + . Divide by zero is trapped. + + INPUT REGISTERS: + . arg0 == dividend + . arg1 == divisor + . mrp == return pc + . sr0 == return space when called externally + + OUTPUT REGISTERS: + . arg0 = undefined + . arg1 = undefined + . ret1 = remainder + + OTHER REGISTERS AFFECTED: + . r1 = undefined + + SIDE EFFECTS: + . Causes a trap under the following conditions: DIVIDE BY ZERO + . Changes memory at the following places: NONE + + PERMISSIBLE CONTEXT: + . Unwindable. + . Does not create a stack frame. + . Suitable for internal or external millicode. + . Assumes the special millicode register conventions. + + DISCUSSION: + . Calls other millicode routines using mrp: NONE + . Calls other millicode routines: NONE */ + + +RDEFINE(temp,r1) +RDEFINE(rmndr,ret1) /* r29 */ + SUBSPA_MILLI + ATTR_MILLI + .export $$remU,millicode + .proc + .callinfo millicode + .entry +GSYM($$remU) + ldo -1(arg1),temp /* is there at most one bit set ? */ + and,= arg1,temp,r0 /* if not, don't use power of 2 */ + b LREF(regular_seq) + addit,= 0,arg1,r0 /* trap on div by zero */ + and arg0,temp,rmndr /* get the result for power of 2 */ + MILLIRETN +LSYM(regular_seq) + comib,>=,n 0,arg1,LREF(special_case) + subi 0,arg1,rmndr /* clear carry, negate the divisor */ + ds r0,rmndr,r0 /* set V-bit to 1 */ + add arg0,arg0,temp /* shift msb bit into carry */ + ds r0,arg1,rmndr /* 1st divide step, if no carry */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 2nd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 3rd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 4th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 5th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 6th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 7th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 8th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 9th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 10th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 11th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 12th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 13th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 14th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 15th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 16th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 17th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 18th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 19th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 20th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 21st divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 22nd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 23rd divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 24th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 25th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 26th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 27th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 28th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 29th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 30th divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 31st divide step */ + addc temp,temp,temp /* shift temp with/into carry */ + ds rmndr,arg1,rmndr /* 32nd divide step, */ + comiclr,<= 0,rmndr,r0 + add rmndr,arg1,rmndr /* correction */ + MILLIRETN + nop + +/* Putting >= on the last DS and deleting COMICLR does not work! */ +LSYM(special_case) + sub,>>= arg0,arg1,rmndr + copy arg0,rmndr + MILLIRETN + nop + .exit + .procend + .end +#endif diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index e724b362c49..aa875fa4348 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -607,7 +607,7 @@ void show_mem(void) printk("Zone list for zone %d on node %d: ", j, i); for (k = 0; zl->zones[k] != NULL; k++) - printk("[%ld/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name); + printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name); printk("\n"); } } |