Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

10 files changed, 71 insertions, 35 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9bbe760f235..6c0900a9bf5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1636,7 +1636,7 @@ config ARCH_NR_GPIO
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
-	default 288 if ARCH_VT8500
+	default 288 if ARCH_VT8500 || ARCH_SUNXI
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 63f2fbcfe81..69140ba99f4 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,10 +170,9 @@
 			gpio-bank = <8>;
 		};
 
-		pinctrl@80157000 {
-			// This is actually the PRCMU base address
-			reg = <0x80157000 0x2000>;
-			compatible = "stericsson,nmk_pinctrl";
+		pinctrl {
+			compatible = "stericsson,nmk-pinctrl";
+			prcm = <&prcmu>;
 		};
 
 		usb@a03e0000 {
@@ -190,9 +189,10 @@
 			interrupts = <0 25 0x4>;
 		};
 
-		prcmu@80157000 {
+		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x1000>;
+			reg-names = "prcmu";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index e61fdd47bd0..f99f60dadf5 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -16,4 +16,34 @@
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
+
+	soc {
+		pinctrl@01c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PA10", "PA11";
+				allwinner,function = "uart1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 498a091a4ea..4a1e45d4aac 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -24,6 +24,8 @@
 
 	soc {
 		uart1: uart@01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 59a2d265a98..e1121890fb2 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -17,4 +17,27 @@
 	memory {
 		reg = <0x40000000 0x20000000>;
 	};
+
+	soc {
+		pinctrl@01c20800 {
+			compatible = "allwinner,sun5i-a13-pinctrl";
+			reg = <0x01c20800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PE10", "PE11";
+				allwinner,function = "uart1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart1_pins_b: uart1@1 {
+				allwinner,pins = "PG3", "PG4";
+				allwinner,function = "uart1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3fdd0085e30..8709a39bd34 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -7,3 +7,4 @@ config ARCH_SUNXI
 	select PINCTRL
 	select SPARSE_IRQ
 	select SUNXI_TIMER
+	select PINCTRL_SUNXI
\ No newline at end of file
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5dea90636d9..3e5bbd0e5b2 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,6 +11,7 @@ config UX500_SOC_COMMON
 	select COMMON_CLK
 	select PINCTRL
 	select PINCTRL_NOMADIK
+	select PINCTRL_ABX500
 	select PL310_ERRATA_753970 if CACHE_PL310
 
 config UX500_SOC_DB8500
@@ -18,6 +19,11 @@ config UX500_SOC_DB8500
 	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
 	select PINCTRL_DB8500
+	select PINCTRL_DB8540
+	select PINCTRL_AB8500
+	select PINCTRL_AB8505
+	select PINCTRL_AB9540
+	select PINCTRL_AB8540
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index d453522edb0..b8781caa54b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -90,26 +90,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
        },
 };
 
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
-	/* config_reg is the initial configuration of ab8500 pins.
-	 * The pins can be configured as GPIO or alt functions based
-	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
-	 * register. This is the array of 7 configuration settings.
-	 * One has to compile time decide these settings. Below is the
-	 * explanation of these setting
-	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
-	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
-	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
-	 * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
-	 * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
-	 * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
-	 * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
-	 * as GPIO then this register selectes the alternate fucntions
-	 */
-	.config_reg		= {0x00, 0x1E, 0x80, 0x01,
-					0x7A, 0x00, 0x00},
 };
 
 /* ab8500-codec */
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 5b286e06474..b80ad9610e9 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -285,7 +285,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
-	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,
+	OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
 	/* Requires clock name and DMA bindings. */
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 7d34c52798b..d526dd8e87d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -38,15 +38,7 @@
 #define MOP500_STMPE1601_IRQ_END	\
 	MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
 
-/* AB8500 virtual gpio IRQ */
-#define AB8500_VIR_GPIO_NR_IRQS			16
-
-#define MOP500_AB8500_VIR_GPIO_IRQ_BASE		\
-	MOP500_STMPE1601_IRQ_END
-#define MOP500_AB8500_VIR_GPIO_IRQ_END		\
-	(MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
-
-#define MOP500_NR_IRQS		MOP500_AB8500_VIR_GPIO_IRQ_END
+#define MOP500_NR_IRQS		MOP500_STMPE1601_IRQ_END
 
 #define MOP500_IRQ_END		MOP500_NR_IRQS