Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "This is the first round of fixes and tying up loose ends for MIPS.

   - plenty of fixes for build errors in specific obscure configurations
   - remove redundant code on the Lantiq platform
   - removal of a useless SEAD I2C driver that was causing a build issue
   - fix an earlier TLB exeption handler fix to also work on Octeon.
   - fix ISA level dependencies in FPU emulator's instruction decoding.
   - don't hardcode kernel command line in Octeon software emulator.
   - fix an earlier fix for the Loondson 2 clock setting"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: SEAD3: Fix I2C device registration.
  MIPS: SEAD3: Nuke PIC32 I2C driver.
  MIPS: ftrace: Fix a microMIPS build problem
  MIPS: MSP71xx: Fix build error
  MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
  MIPS: Prevent compiler warning from cop2_{save,restore}
  MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
  MIPS: idle: Remove leftover __pastwait symbol and its references
  MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
  MIPS: ptrace.h: Add a missing include
  MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
  MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
  MIPS: Octeon: Remove special case for simulator command line.
  MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
  MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
  pci: pci-lantiq: remove duplicate check on resource
  MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
  MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions

21 files changed, 29 insertions, 574 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ad6badb6be7..f43aa536c51 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2066,6 +2066,7 @@ config MIPS_CPS
 	  support is unavailable.
 
 config MIPS_CPS_PM
+	depends on MIPS_CPS
 	select MIPS_CPC
 	bool
 
diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c
index 4d661a1d2da..9423f5aed28 100644
--- a/arch/mips/ath79/mach-db120.c
+++ b/arch/mips/ath79/mach-db120.c
@@ -113,7 +113,7 @@ static void __init db120_pci_init(u8 *eeprom)
 	ath79_register_pci();
 }
 #else
-static inline void db120_pci_init(void) {}
+static inline void db120_pci_init(u8 *eeprom) {}
 #endif /* CONFIG_PCI */
 
 static void __init db120_setup(void)
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 38f4c32e281..5ebdb32d9a2 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -806,15 +806,6 @@ void __init prom_init(void)
 #endif
 	}
 
-	if (octeon_is_simulation()) {
-		/*
-		 * The simulator uses a mtdram device pre filled with
-		 * the filesystem. Also specify the calibration delay
-		 * to avoid calculating it every time.
-		 */
-		strcat(arcs_cmdline, " rw root=1f00 slram=root,0x40000000,+1073741824");
-	}
-
 	mips_hpt_frequency = octeon_get_clock_rate();
 
 	octeon_init_cvmcount();
diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
index 51f80bd36fc..63b3468ede4 100644
--- a/arch/mips/include/asm/cop2.h
+++ b/arch/mips/include/asm/cop2.h
@@ -37,15 +37,15 @@ extern void nlm_cop2_restore(struct nlm_cop2_state *);
 
 #define cop2_present		1
 #define cop2_lazy_restore	1
-#define cop2_save(r)		do { (r); } while (0)
-#define cop2_restore(r)		do { (r); } while (0)
+#define cop2_save(r)		do { (void)(r); } while (0)
+#define cop2_restore(r)		do { (void)(r); } while (0)
 
 #else
 
 #define cop2_present		0
 #define cop2_lazy_restore	0
-#define cop2_save(r)		do { (r); } while (0)
-#define cop2_restore(r)		do { (r); } while (0)
+#define cop2_save(r)		do { (void)(r); } while (0)
+#define cop2_restore(r)		do { (void)(r); } while (0)
 #endif
 
 enum cu2_ops {
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index 992aaba603b..b463f2aa5a6 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -24,7 +24,7 @@ do {							\
 	asm volatile (					\
 		"1: " load " %[tmp_dst], 0(%[tmp_src])\n"	\
 		"   li %[tmp_err], 0\n"			\
-		"2:\n"					\
+		"2: .insn\n"				\
 							\
 		".section .fixup, \"ax\"\n"		\
 		"3: li %[tmp_err], 1\n"			\
@@ -46,7 +46,7 @@ do {						\
 	asm volatile (				\
 		"1: " store " %[tmp_src], 0(%[tmp_dst])\n"\
 		"   li %[tmp_err], 0\n"		\
-		"2:\n"				\
+		"2: .insn\n"			\
 						\
 		".section .fixup, \"ax\"\n"	\
 		"3: li %[tmp_err], 1\n"		\
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
index d9f932de80e..1c967abd545 100644
--- a/arch/mips/include/asm/idle.h
+++ b/arch/mips/include/asm/idle.h
@@ -8,19 +8,12 @@ extern void (*cpu_wait)(void);
 extern void r4k_wait(void);
 extern asmlinkage void __r4k_wait(void);
 extern void r4k_wait_irqoff(void);
-extern void __pastwait(void);
 
 static inline int using_rollback_handler(void)
 {
 	return cpu_wait == r4k_wait;
 }
 
-static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
-{
-	return addr >= (unsigned long)r4k_wait_irqoff &&
-	       addr < (unsigned long)__pastwait;
-}
-
 extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
 				   struct cpuidle_driver *drv, int index);
 
diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h
index bbcfb8ba810..91a3d197ede 100644
--- a/arch/mips/include/uapi/asm/ptrace.h
+++ b/arch/mips/include/uapi/asm/ptrace.h
@@ -9,6 +9,8 @@
 #ifndef _UAPI_ASM_PTRACE_H
 #define _UAPI_ASM_PTRACE_H
 
+#include <linux/types.h>
+
 /* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
 #define FPR_BASE	32
 #define PC		64
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 09ce4598075..0b9082b6b68 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -68,9 +68,6 @@ void r4k_wait_irqoff(void)
 		"	wait			\n"
 		"	.set	pop		\n");
 	local_irq_enable();
-	__asm__(
-	"	.globl __pastwait	\n"
-	"__pastwait:			\n");
 }
 
 /*
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
index 1d2ee8a9be1..8776d0a3427 100644
--- a/arch/mips/lasat/Kconfig
+++ b/arch/mips/lasat/Kconfig
@@ -4,7 +4,7 @@ config PICVUE
 
 config PICVUE_PROC
 	tristate "PICVUE LCD display driver /proc interface"
-	depends on PICVUE
+	depends on PICVUE && PROC_FS
 
 config DS1603
 	bool "DS1603 RTC driver"
diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c
index a217061beee..462e34d46b4 100644
--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson/lemote-2f/clock.c
@@ -91,6 +91,7 @@ EXPORT_SYMBOL(clk_put);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned int rate_khz = rate / 1000;
 	struct cpufreq_frequency_table *pos;
 	int ret = 0;
 	int regval;
@@ -107,9 +108,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 		propagate_rate(clk);
 
 	cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
-		if (rate == pos->frequency)
+		if (rate_khz == pos->frequency)
 			break;
-	if (rate != pos->frequency)
+	if (rate_khz != pos->frequency)
 		return -ENOTSUPP;
 
 	clk->rate = rate;
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 7a4727795a7..51a0fde4bec 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1023,7 +1023,7 @@ emul:
 					goto emul;
 
 				case cop1x_op:
-					if (cpu_has_mips_4_5 || cpu_has_mips64)
+					if (cpu_has_mips_4_5 || cpu_has_mips64 || cpu_has_mips32r2)
 						/* its one of ours */
 						goto emul;
 
@@ -1068,7 +1068,7 @@ emul:
 		break;
 
 	case cop1x_op:
-		if (!cpu_has_mips_4_5 && !cpu_has_mips64)
+		if (!cpu_has_mips_4_5 && !cpu_has_mips64 && !cpu_has_mips32r2)
 			return SIGILL;
 
 		sig = fpux_emu(xcp, ctx, ir, fault_addr);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index a08dd53a1cc..b5f228e7eae 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1062,6 +1062,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 struct mips_huge_tlb_info {
 	int huge_pte;
 	int restore_scratch;
+	bool need_reload_pte;
 };
 
 static struct mips_huge_tlb_info
@@ -1076,6 +1077,7 @@ build_fast_tlb_refill_handler (u32 **p, struct uasm_label **l,
 
 	rv.huge_pte = scratch;
 	rv.restore_scratch = 0;
+	rv.need_reload_pte = false;
 
 	if (check_for_high_segbits) {
 		UASM_i_MFC0(p, tmp, C0_BADVADDR);
@@ -1264,6 +1266,7 @@ static void build_r4000_tlb_refill_handler(void)
 	} else {
 		htlb_info.huge_pte = K0;
 		htlb_info.restore_scratch = 0;
+		htlb_info.need_reload_pte = true;
 		vmalloc_mode = refill_noscratch;
 		/*
 		 * create the plain linear handler
@@ -1300,7 +1303,8 @@ static void build_r4000_tlb_refill_handler(void)
 	}
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 	uasm_l_tlb_huge_update(&l, p);
-	UASM_i_LW(&p, K0, 0, K1);
+	if (htlb_info.need_reload_pte)
+		UASM_i_LW(&p, htlb_info.huge_pte, 0, K1);
 	build_huge_update_entries(&p, htlb_info.huge_pte, K1);
 	build_huge_tlb_write_entry(&p, &l, &r, K0, tlb_random,
 				   htlb_info.restore_scratch);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index b9510ea8db5..6510ace272d 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -5,8 +5,9 @@
 # Copyright (C) 2008 Wind River Systems, Inc.
 #   written by Ralf Baechle <ralf@linux-mips.org>
 #
-obj-y				:= malta-amon.o malta-display.o malta-init.o \
+obj-y				:= malta-display.o malta-init.o \
 				   malta-int.o malta-memory.o malta-platform.o \
 				   malta-reset.o malta-setup.o malta-time.o
 
+obj-$(CONFIG_MIPS_CMP)		+= malta-amon.o
 obj-$(CONFIG_MIPS_MALTA_PM)	+= malta-pm.o
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index febf4334545..2ae49e99eb6 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -14,7 +14,6 @@ obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
 				   sead3-setup.o sead3-time.o
 
 obj-y				+= sead3-i2c-dev.o sead3-i2c.o \
-				   sead3-pic32-i2c-drv.o sead3-pic32-bus.o \
 				   leds-sead3.o sead3-leds.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o
diff --git a/arch/mips/mti-sead3/sead3-i2c.c b/arch/mips/mti-sead3/sead3-i2c.c
index f70d5fc58ef..795ae83894e 100644
--- a/arch/mips/mti-sead3/sead3-i2c.c
+++ b/arch/mips/mti-sead3/sead3-i2c.c
@@ -5,10 +5,8 @@
  *
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
  */
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <irq.h>
 
 struct resource sead3_i2c_resources[] = {
 	{
@@ -30,8 +28,4 @@ static int __init sead3_i2c_init(void)
 	return platform_device_register(&sead3_i2c_device);
 }
 
-module_init(sead3_i2c_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("I2C probe driver for SEAD3");
+device_initcall(sead3_i2c_init);
diff --git a/arch/mips/mti-sead3/sead3-pic32-bus.c b/arch/mips/mti-sead3/sead3-pic32-bus.c
deleted file mode 100644
index 3b12aa5a7c8..00000000000
--- a/arch/mips/mti-sead3/sead3-pic32-bus.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-
-#define PIC32_NULL	0x00
-#define PIC32_RD	0x01
-#define PIC32_SYSRD	0x02
-#define PIC32_WR	0x10
-#define PIC32_SYSWR	0x20
-#define PIC32_IRQ_CLR	0x40
-#define PIC32_STATUS	0x80
-
-#define DELAY() udelay(100)	/* FIXME: needed? */
-
-/* spinlock to ensure atomic access to PIC32 */
-static DEFINE_SPINLOCK(pic32_bus_lock);
-
-/* FIXME: io_remap these */
-static void __iomem *bus_xfer	= (void __iomem *)0xbf000600;
-static void __iomem *bus_status = (void __iomem *)0xbf000060;
-
-static inline unsigned int ioready(void)
-{
-	return readl(bus_status) & 1;
-}
-
-static inline void wait_ioready(void)
-{
-	do { } while (!ioready());
-}
-
-static inline void wait_ioclear(void)
-{
-	do { } while (ioready());
-}
-
-static inline void check_ioclear(void)
-{
-	if (ioready()) {
-		pr_debug("ioclear: initially busy\n");
-		do {
-			(void) readl(bus_xfer);
-			DELAY();
-		} while (ioready());
-		pr_debug("ioclear: cleared busy\n");
-	}
-}
-
-u32 pic32_bus_readl(u32 reg)
-{
-	unsigned long flags;
-	u32 status, val;
-
-	spin_lock_irqsave(&pic32_bus_lock, flags);
-
-	check_ioclear();
-
-	writel((PIC32_RD << 24) | (reg & 0x00ffffff), bus_xfer);
-	DELAY();
-	wait_ioready();
-	status = readl(bus_xfer);
-	DELAY();
-	val = readl(bus_xfer);
-	wait_ioclear();
-
-	pr_debug("pic32_bus_readl: *%x -> %x (status=%x)\n", reg, val, status);
-
-	spin_unlock_irqrestore(&pic32_bus_lock, flags);
-
-	return val;
-}
-
-void pic32_bus_writel(u32 val, u32 reg)
-{
-	unsigned long flags;
-	u32 status;
-
-	spin_lock_irqsave(&pic32_bus_lock, flags);
-
-	check_ioclear();
-
-	writel((PIC32_WR << 24) | (reg & 0x00ffffff), bus_xfer);
-	DELAY();
-	writel(val, bus_xfer);
-	DELAY();
-	wait_ioready();
-	status = readl(bus_xfer);
-	wait_ioclear();
-
-	pr_debug("pic32_bus_writel: *%x <- %x (status=%x)\n", reg, val, status);
-
-	spin_unlock_irqrestore(&pic32_bus_lock, flags);
-}
diff --git a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c b/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
deleted file mode 100644
index 80fe194cfa5..00000000000
--- a/arch/mips/mti-sead3/sead3-pic32-i2c-drv.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#define PIC32_I2CxCON		0x0000
-#define PIC32_I2CxCONCLR	0x0004
-#define PIC32_I2CxCONSET	0x0008
-#define PIC32_I2CxCONINV	0x000C
-#define	 I2CCON_ON		(1<<15)
-#define	 I2CCON_FRZ		(1<<14)
-#define	 I2CCON_SIDL		(1<<13)
-#define	 I2CCON_SCLREL		(1<<12)
-#define	 I2CCON_STRICT		(1<<11)
-#define	 I2CCON_A10M		(1<<10)
-#define	 I2CCON_DISSLW		(1<<9)
-#define	 I2CCON_SMEN		(1<<8)
-#define	 I2CCON_GCEN		(1<<7)
-#define	 I2CCON_STREN		(1<<6)
-#define	 I2CCON_ACKDT		(1<<5)
-#define	 I2CCON_ACKEN		(1<<4)
-#define	 I2CCON_RCEN		(1<<3)
-#define	 I2CCON_PEN		(1<<2)
-#define	 I2CCON_RSEN		(1<<1)
-#define	 I2CCON_SEN		(1<<0)
-
-#define PIC32_I2CxSTAT		0x0010
-#define PIC32_I2CxSTATCLR	0x0014
-#define PIC32_I2CxSTATSET	0x0018
-#define PIC32_I2CxSTATINV	0x001C
-#define	 I2CSTAT_ACKSTAT	(1<<15)
-#define	 I2CSTAT_TRSTAT		(1<<14)
-#define	 I2CSTAT_BCL		(1<<10)
-#define	 I2CSTAT_GCSTAT		(1<<9)
-#define	 I2CSTAT_ADD10		(1<<8)
-#define	 I2CSTAT_IWCOL		(1<<7)
-#define	 I2CSTAT_I2COV		(1<<6)
-#define	 I2CSTAT_DA		(1<<5)
-#define	 I2CSTAT_P		(1<<4)
-#define	 I2CSTAT_S		(1<<3)
-#define	 I2CSTAT_RW		(1<<2)
-#define	 I2CSTAT_RBF		(1<<1)
-#define	 I2CSTAT_TBF		(1<<0)
-
-#define PIC32_I2CxADD		0x0020
-#define PIC32_I2CxADDCLR	0x0024
-#define PIC32_I2CxADDSET	0x0028
-#define PIC32_I2CxADDINV	0x002C
-#define PIC32_I2CxMSK		0x0030
-#define PIC32_I2CxMSKCLR	0x0034
-#define PIC32_I2CxMSKSET	0x0038
-#define PIC32_I2CxMSKINV	0x003C
-#define PIC32_I2CxBRG		0x0040
-#define PIC32_I2CxBRGCLR	0x0044
-#define PIC32_I2CxBRGSET	0x0048
-#define PIC32_I2CxBRGINV	0x004C
-#define PIC32_I2CxTRN		0x0050
-#define PIC32_I2CxTRNCLR	0x0054
-#define PIC32_I2CxTRNSET	0x0058
-#define PIC32_I2CxTRNINV	0x005C
-#define PIC32_I2CxRCV		0x0060
-
-struct i2c_platform_data {
-	u32	base;
-	struct i2c_adapter adap;
-	u32	xfer_timeout;
-	u32	ack_timeout;
-	u32	ctl_timeout;
-};
-
-extern u32 pic32_bus_readl(u32 reg);
-extern void pic32_bus_writel(u32 val, u32 reg);
-
-static inline void
-StartI2C(struct i2c_platform_data *adap)
-{
-	pr_debug("StartI2C\n");
-	pic32_bus_writel(I2CCON_SEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-StopI2C(struct i2c_platform_data *adap)
-{
-	pr_debug("StopI2C\n");
-	pic32_bus_writel(I2CCON_PEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-AckI2C(struct i2c_platform_data *adap)
-{
-	pr_debug("AckI2C\n");
-	pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONCLR);
-	pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-NotAckI2C(struct i2c_platform_data *adap)
-{
-	pr_debug("NakI2C\n");
-	pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONSET);
-	pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline int
-IdleI2C(struct i2c_platform_data *adap)
-{
-	int i;
-
-	pr_debug("IdleI2C\n");
-	for (i = 0; i < adap->ctl_timeout; i++) {
-		if (((pic32_bus_readl(adap->base + PIC32_I2CxCON) &
-		     (I2CCON_ACKEN | I2CCON_RCEN | I2CCON_PEN | I2CCON_RSEN |
-		      I2CCON_SEN)) == 0) &&
-		    ((pic32_bus_readl(adap->base + PIC32_I2CxSTAT) &
-		     (I2CSTAT_TRSTAT)) == 0))
-			return 0;
-		udelay(1);
-	}
-	return -ETIMEDOUT;
-}
-
-static inline u32
-MasterWriteI2C(struct i2c_platform_data *adap, u32 byte)
-{
-	pr_debug("MasterWriteI2C\n");
-
-	pic32_bus_writel(byte, adap->base + PIC32_I2CxTRN);
-
-	return pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_IWCOL;
-}
-
-static inline u32
-MasterReadI2C(struct i2c_platform_data *adap)
-{
-	pr_debug("MasterReadI2C\n");
-
-	pic32_bus_writel(I2CCON_RCEN, adap->base + PIC32_I2CxCONSET);
-
-	while (pic32_bus_readl(adap->base + PIC32_I2CxCON) & I2CCON_RCEN)
-		;
-
-	pic32_bus_writel(I2CSTAT_I2COV, adap->base + PIC32_I2CxSTATCLR);
-
-	return pic32_bus_readl(adap->base + PIC32_I2CxRCV);
-}
-
-static int
-do_address(struct i2c_platform_data *adap, unsigned int addr, int rd)
-{
-	pr_debug("doaddress\n");
-
-	IdleI2C(adap);
-	StartI2C(adap);
-	IdleI2C(adap);
-
-	addr <<= 1;
-	if (rd)
-		addr |= 1;
-
-	if (MasterWriteI2C(adap, addr))
-		return -EIO;
-	IdleI2C(adap);
-	if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_ACKSTAT)
-		return -EIO;
-	return 0;
-}
-
-static int
-i2c_read(struct i2c_platform_data *adap, unsigned char *buf,
-		    unsigned int len)
-{
-	int	i;
-	u32	data;
-
-	pr_debug("i2c_read\n");
-
-	i = 0;
-	while (i < len) {
-		data = MasterReadI2C(adap);
-		buf[i++] = data;
-		if (i < len)
-			AckI2C(adap);
-		else
-			NotAckI2C(adap);
-	}
-
-	StopI2C(adap);
-	IdleI2C(adap);
-	return 0;
-}
-
-static int
-i2c_write(struct i2c_platform_data *adap, unsigned char *buf,
-		     unsigned int len)
-{
-	int	i;
-	u32	data;
-
-	pr_debug("i2c_write\n");
-
-	i = 0;
-	while (i < len) {
-		data = buf[i];
-		if (MasterWriteI2C(adap, data))
-			return -EIO;
-		IdleI2C(adap);
-		if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) &
-		    I2CSTAT_ACKSTAT)
-			return -EIO;
-		i++;
-	}
-
-	StopI2C(adap);
-	IdleI2C(adap);
-	return 0;
-}
-
-static int
-platform_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
-{
-	struct i2c_platform_data *adap = i2c_adap->algo_data;
-	struct i2c_msg *p;
-	int i, err = 0;
-
-	pr_debug("platform_xfer\n");
-	for (i = 0; i < num; i++) {
-#define __BUFSIZE 80
-		int ii;
-		static char buf[__BUFSIZE];
-		char *b = buf;
-
-		p = &msgs[i];
-		b += sprintf(buf, " [%d bytes]", p->len);
-		if ((p->flags & I2C_M_RD) == 0) {
-			for (ii = 0; ii < p->len; ii++) {
-				if (b < &buf[__BUFSIZE-4]) {
-					b += sprintf(b, " %02x", p->buf[ii]);
-				} else {
-					strcat(b, "...");
-					break;
-				}
-			}
-		}
-		pr_debug("xfer%d: DevAddr: %04x Op:%s Data:%s\n", i, p->addr,
-			 (p->flags & I2C_M_RD) ? "Rd" : "Wr", buf);
-	}
-
-
-	for (i = 0; !err && i < num; i++) {
-		p = &msgs[i];
-		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
-		if (err || !p->len)
-			continue;
-		if (p->flags & I2C_M_RD)
-			err = i2c_read(adap, p->buf, p->len);
-		else
-			err = i2c_write(adap, p->buf, p->len);
-	}
-
-	/* Return the number of messages processed, or the error code. */
-	if (err == 0)
-		err = num;
-
-	return err;
-}
-
-static u32
-platform_func(struct i2c_adapter *adap)
-{
-	pr_debug("platform_algo\n");
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm platform_algo = {
-	.master_xfer	= platform_xfer,
-	.functionality	= platform_func,
-};
-
-static void i2c_platform_setup(struct i2c_platform_data *priv)
-{
-	pr_debug("i2c_platform_setup\n");
-
-	pic32_bus_writel(500, priv->base + PIC32_I2CxBRG);
-	pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONCLR);
-	pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONSET);
-	pic32_bus_writel((I2CSTAT_BCL | I2CSTAT_IWCOL),
-		(priv->base + PIC32_I2CxSTATCLR));
-}
-
-static void i2c_platform_disable(struct i2c_platform_data *priv)
-{
-	pr_debug("i2c_platform_disable\n");
-}
-
-static int i2c_platform_probe(struct platform_device *pdev)
-{
-	struct i2c_platform_data *priv;
-	struct resource *r;
-	int ret;
-
-	pr_debug("i2c_platform_probe\n");
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r)
-		return -ENODEV;
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_platform_data),
-			    GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	/* FIXME: need to allocate resource in PIC32 space */
-#if 0
-	priv->base = bus_request_region(r->start, resource_size(r),
-					  pdev->name);
-#else
-	priv->base = r->start;
-#endif
-	if (!priv->base)
-		return -EBUSY;
-
-	priv->xfer_timeout = 200;
-	priv->ack_timeout = 200;
-	priv->ctl_timeout = 200;
-
-	priv->adap.nr = pdev->id;
-	priv->adap.algo = &platform_algo;
-	priv->adap.algo_data = priv;
-	priv->adap.dev.parent = &pdev->dev;
-	strlcpy(priv->adap.name, "PIC32 I2C", sizeof(priv->adap.name));
-
-	i2c_platform_setup(priv);
-
-	ret = i2c_add_numbered_adapter(&priv->adap);
-	if (ret) {
-		i2c_platform_disable(priv);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, priv);
-	return 0;
-}
-
-static int i2c_platform_remove(struct platform_device *pdev)
-{
-	struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
-	pr_debug("i2c_platform_remove\n");
-	platform_set_drvdata(pdev, NULL);
-	i2c_del_adapter(&priv->adap);
-	i2c_platform_disable(priv);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-i2c_platform_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
-	dev_dbg(&pdev->dev, "i2c_platform_disable\n");
-	i2c_platform_disable(priv);
-
-	return 0;
-}
-
-static int
-i2c_platform_resume(struct platform_device *pdev)
-{
-	struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
-	dev_dbg(&pdev->dev, "i2c_platform_setup\n");
-	i2c_platform_setup(priv);
-
-	return 0;
-}
-#else
-#define i2c_platform_suspend	NULL
-#define i2c_platform_resume	NULL
-#endif
-
-static struct platform_driver i2c_platform_driver = {
-	.driver = {
-		.name	= "i2c_pic32",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= i2c_platform_probe,
-	.remove		= i2c_platform_remove,
-	.suspend	= i2c_platform_suspend,
-	.resume		= i2c_platform_resume,
-};
-
-static int __init
-i2c_platform_init(void)
-{
-	pr_debug("i2c_platform_init\n");
-	return platform_driver_register(&i2c_platform_driver);
-}
-
-static void __exit
-i2c_platform_exit(void)
-{
-	pr_debug("i2c_platform_exit\n");
-	platform_driver_unregister(&i2c_platform_driver);
-}
-
-MODULE_AUTHOR("Chris Dearman, MIPS Technologies INC.");
-MODULE_DESCRIPTION("PIC32 I2C driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_platform_init);
-module_exit(i2c_platform_exit);
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 37fe8e7887e..d3ed15b2b2d 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -215,17 +215,12 @@ static int ltq_pci_probe(struct platform_device *pdev)
 
 	pci_clear_flags(PCI_PROBE_ONLY);
 
-	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res_cfg || !res_bridge) {
-		dev_err(&pdev->dev, "missing memory resources\n");
-		return -EINVAL;
-	}
-
 	ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
 	if (IS_ERR(ltq_pci_membase))
 		return PTR_ERR(ltq_pci_membase);
 
+	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
 	if (IS_ERR(ltq_pci_mapped_cfg))
 		return PTR_ERR(ltq_pci_mapped_cfg);
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
index f914c753de2..8d53d7a2ed4 100644
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -16,6 +16,7 @@
 #include <linux/time.h>
 
 #include <asm/irq_cpu.h>
+#include <asm/setup.h>
 
 #include <msp_int.h>
 
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
index b8df2f7b332..1207ec4dfb7 100644
--- a/arch/mips/pmcs-msp71xx/msp_irq_cic.c
+++ b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
@@ -131,11 +131,11 @@ static int msp_cic_irq_set_affinity(struct irq_data *d,
 	int cpu;
 	unsigned long flags;
 	unsigned int  mtflags;
-	unsigned long imask = (1 << (irq - MSP_CIC_INTBASE));
+	unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
 	volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
 
 	/* timer balancing should be disabled in kernel code */
-	BUG_ON(irq == MSP_INT_VPE0_TIMER || irq == MSP_INT_VPE1_TIMER);
+	BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
 
 	LOCK_CORE(flags, mtflags);
 	/* enable if any of each VPE's TCs require this IRQ */
diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile
index c8ed2c807e6..455c40d6d62 100644
--- a/arch/mips/sibyte/Makefile
+++ b/arch/mips/sibyte/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_SIBYTE_RHONE)	+= swarm/
 obj-$(CONFIG_SIBYTE_SENTOSA)	+= swarm/
 obj-$(CONFIG_SIBYTE_SWARM)	+= swarm/
 obj-$(CONFIG_SIBYTE_BIGSUR)	+= swarm/
+obj-$(CONFIG_SIBYTE_LITTLESUR)	+= swarm/