tree-wide: Assorted spelling fixes

In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

24 files changed, 39 insertions, 39 deletions

diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1c5a1..c33360e8286 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
  *
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6613a..ab3712c86d2 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_addr",
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25be3dd..d0cb5e94077 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -356,7 +356,7 @@ static struct resource ave_resources[] = {
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
-	 * adresses, so they should never point to system RAM.
+	 * addresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
@@ -571,7 +571,7 @@ static void __init u300_init_check_chip(void)
 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbbeeab..d591fe13ed1 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 #include <mach/hardware.h>
 
 	.macro	addruart,rx
-	/* If we move the adress using MMU, use this. */
+	/* If we move the address using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
 	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
index 652e2bbdaa2..dda19da037a 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
  *	others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
  * each case.
 */
 extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
index 36a85f5000c..a111ad87183 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
  * needs to touch this if the clk_48m is used as the USB OHCI or other
  * peripheral source.
 */
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d78ba..d623235ae96 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@ struct s3c_cpufreq_config {
  * @locktime_m: The lock-time in uS for the MPLL.
  * @locktime_u: The lock-time in uS for the UPLL.
  * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b467efa..8f79163f139 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum)
 		sum += *buff++;
 
 	if (endMarker > buff)
-		sum += *(const u8 *)buff;	/* add extra byte seperately */
+		sum += *(const u8 *)buff;	/* add extra byte separately */
 
 	BITOFF;
 	return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb28ab..c030d020660 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		spin_unlock(&mmu_context_lock);
 
 		/*
-		 * Remember the pgd for the fault handlers. Keep a seperate
+		 * Remember the pgd for the fault handlers. Keep a separate
 		 * copy of it because current and active_mm might be invalid
 		 * at points where * there's still a need to derefer the pgd.
 		 */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f3284..c1a8df22080 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf99449..c6c6d938112 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void)
  * Note:  This stuff is duped here because Altix requires the PCDP to
  * locate a usable VGA device due to lack of proper ACPI support.  Structures
  * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
  */
 
 struct hcdp_uart_desc {
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d13b1..5890897d28b 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state;
  * bytes have been lost and in which state of the packet structure we are now.
  * This usually causes keyboards bytes to be interpreted as mouse movements
  * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
  * introduced the RESYNC state for IKBD data. In this state, the bytes up to
  * one that really looks like a key event (0x04..0xf2) or the start of a mouse
  * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5a9f..6e2413e518c 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f27ef..d8b5d12fb66 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
 			compatible = "cfi-flash";
 			/*
 			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 seperate regions
+			 * one die, so we need to define 2 separate regions
 			 * that are scanned by physmap_of independantly.
 			 */
 			reg = <0 0x00000000 0x02000000
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679af54d..e34347d567a 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
 /**
  * struct ccw1 - channel command word
  * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
  * @count: byte count
  * @cda: data address
  *
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index e27ca63076d..27c1a2e236d 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -221,7 +221,7 @@ _sclp_print:
 	lh	%r9,0(%r8)			# update sccb length
 	ar	%r9,%r6
 	sth	%r9,0(%r8)
-	ar	%r7,%r6				# update current mto adress
+	ar	%r7,%r6				# update current mto address
 	ltr	%r0,%r0				# more characters?
 	jnz	.LinitmtoS4
 	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 87f1760c0aa..554e0b80bcd 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -124,7 +124,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 
 		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
 		      (1<<LEON3_GPTIMER_SEPIRQ))) {
-			prom_printf("irq timer not configured with seperate irqs \n");
+			prom_printf("irq timer not configured with separate irqs \n");
 			BUG();
 		}
 
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index e856456ec02..a565ee5146e 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1353,7 +1353,7 @@ static void perf_callchain_user_32(struct pt_regs *regs,
 }
 
 /* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
  */
 static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
 
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed2c1b..575331cb2a8 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
 
 #include <asm/asm-offsets.h>
 
-/* return adress at 0 */
+/* return address at 0 */
 
 #define in_blk    12  /* input byte array address parameter*/
 #define out_blk   8  /* output byte array address parameter*/
@@ -230,8 +230,8 @@ twofish_enc_blk:
 	push    %edi
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
@@ -286,8 +286,8 @@ twofish_dec_blk:
 
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a58661..573aa102542 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
 twofish_enc_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
@@ -274,11 +274,11 @@ twofish_enc_blk:
 twofish_dec_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b5035371..3d1e6f16b7a 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
 #define GET_CR2_INTO_RCX movq %cr2, %rcx
 #endif
 
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
  * because we need identity-mapped pages.
  *
  */
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde607814..fb99f7edb34 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1309,7 +1309,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
 /*
  * get_tce_space_from_tar():
  * Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
  */
 static void __init get_tce_space_from_tar(void)
 {
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 597683aa5ba..dec8f68e3ed 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@ u64 native_sched_clock(void)
 	 *   unstable. We do this because unlike Time Of Day,
 	 *   the scheduler clock tolerates small errors and it's
 	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
+	 *   can achieve it. )
 	 */
 	if (unlikely(tsc_disabled)) {
 		/* No locking but a rare wrong value is not a big deal: */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c485fd..77fc9f6dc01 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(user_exception)
@@ -244,7 +244,7 @@ _user_exception:
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(kernel_exception)