sh: pci: Kill off the last remnants of the now unused pci-auto code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

5 files changed, 0 insertions, 656 deletions

diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 1d53496b149..ea903a984f0 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -18,24 +18,6 @@ config SH_PCIDMA_NONCOHERENT
 	  bridge integrated with your SH CPU, refer carefully to the chip specs
 	  to see if you can say 'N' here. Otherwise, leave it as 'Y'.
 
-# Temporary config option for transitioning off of PCI_AUTO
 config PCI_NEW
 	def_bool y
 	depends on PCI
-
-# This is also board-specific
-config PCI_AUTO
-	bool
-	depends on PCI && !PCI_NEW
-	default y
-
-config PCI_AUTO_UPDATE_RESOURCES
-	bool
-	depends on PCI_AUTO
-	default y if !SH_DREAMCAST
-	help
-	  Selecting this option will cause the PCI auto code to leave your
-	  BAR values alone. Otherwise they will be updated automatically. If
-	  for some reason, you have a board that simply refuses to work
-	  with its resources updated beyond what they are when the device
-	  is powered up, set this to N. Everyone else will want this as Y.
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index e388a70d146..a8350ccfa9d 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the PCI specific kernel interface routines under Linux.
 #
 obj-y					+= pci-lib.o
-obj-$(CONFIG_PCI_AUTO)			+= pci.o pci-auto.o
 obj-$(CONFIG_PCI_NEW)			+= pci-new.o
 
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
deleted file mode 100644
index 1d715ec405b..00000000000
--- a/arch/sh/drivers/pci/pci-auto.c
+++ /dev/null
@@ -1,546 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000, 2001 MontaVista Software Inc.
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * Modified for MIPS by Jun Sun, jsun@mvista.com
- *
- * . Simplify the interface between pci_auto and the rest: a single function.
- * . Assign resources from low address to upper address.
- * . change most int to u32.
- *
- * Further modified to include it as mips generic code, ppopov@mvista.com.
- *
- * 2001-10-26  Bradley D. LaRonde <brad@ltc.com>
- * - Add a top_bus argument to the "early config" functions so that
- *   they can set a fake parent bus pointer to convince the underlying
- *   pci ops to use type 1 configuration for sub busses.
- * - Set bridge base and limit registers correctly.
- * - Align io and memory base properly before and after bridge setup.
- * - Don't fall through to pci_setup_bars for bridge.
- * - Reformat the debug output to look more like lspci's output.
- *
- * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
- *
- * 2003-08-05  Paul Mundt <lethal@linux-sh.org>
- * - Don't update the BAR values on systems that already have valid addresses
- *   and don't want these updated for whatever reason, by way of a new config
- *   option check. However, we still read in the old BAR values so that they
- *   can still be reported through the debug output.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#define	DEBUG
-#ifdef	DEBUG
-#define	DBG(x...)	printk(x)
-#else
-#define	DBG(x...)
-#endif
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
-	int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.bus = &bus;
-	dev.sysdata = hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.sysdata = hose;
-
-	if(busnr != top_bus)
-		/* Fake a parent bus structure. */
-		bus.parent = &bus;
-	else
-		bus.parent = NULL;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-static int early_##rw##_config_##size(struct pci_channel *hose,		\
-	int top_bus, int bus, int devfn, int offset, type value)	\
-{									\
-	return pci_##rw##_config_##size(				\
-		fake_pci_dev(hose, top_bus, bus, devfn),		\
-		offset, value);						\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-static struct resource *io_resource_inuse;
-static struct resource *mem_resource_inuse;
-
-static u32 pciauto_lower_iospc;
-static u32 pciauto_upper_iospc;
-
-static u32 pciauto_lower_memspc;
-static u32 pciauto_upper_memspc;
-
-static void __init
-pciauto_setup_bars(struct pci_channel *hose,
-		   int top_bus,
-		   int current_bus,
-		   int pci_devfn,
-		   int bar_limit)
-{
-	u32 bar_response, bar_size, bar_value;
-	u32 bar, addr_mask, bar_nr = 0;
-	u32 * upper_limit;
-	u32 * lower_limit;
-	int found_mem64 = 0;
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		u32 bar_addr;
-
-		/* Read the old BAR value */
-		early_read_config_dword(hose, top_bus,
-					current_bus,
-					pci_devfn,
-					bar,
-					&bar_addr);
-
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose, top_bus,
-					 current_bus,
-					 pci_devfn,
-					 bar,
-					 0xffffffff);
-
-		early_read_config_dword(hose, top_bus,
-					current_bus,
-					pci_devfn,
-					bar,
-					&bar_response);
-
-		/*
-		 * Write the old BAR value back out, only update the BAR
-		 * if we implicitly want resources to be updated, which
-		 * is done by the generic code further down. -- PFM.
-		 */
-		early_write_config_dword(hose, top_bus,
-					 current_bus,
-					 pci_devfn,
-					 bar,
-					 bar_addr);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/*
-		 * Workaround for a BAR that doesn't use its upper word,
-		 * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
-		 * bdl <brad@ltc.com>
-		 */
-		if (!(bar_response & 0xffff0000))
-			bar_response |= 0xffff0000;
-
-retry:
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			lower_limit = &pciauto_lower_iospc;
-			DBG("        I/O");
-		} else {
-			if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			    PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
-			upper_limit = &pciauto_upper_memspc;
-			lower_limit = &pciauto_lower_memspc;
-			DBG("        Mem");
-		}
-
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
-
-		if ((bar_value + bar_size) > *upper_limit) {
-			if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-				if (io_resource_inuse->child) {
-					io_resource_inuse =
-						io_resource_inuse->child;
-					pciauto_lower_iospc =
-						io_resource_inuse->start;
-					pciauto_upper_iospc =
-						io_resource_inuse->end + 1;
-					goto retry;
-				}
-
-			} else {
-				if (mem_resource_inuse->child) {
-					mem_resource_inuse =
-						mem_resource_inuse->child;
-					pciauto_lower_memspc =
-						mem_resource_inuse->start;
-					pciauto_upper_memspc =
-						mem_resource_inuse->end + 1;
-					goto retry;
-				}
-			}
-			DBG(" unavailable -- skipping, value %x size %x\n",
-					bar_value, bar_size);
-			continue;
-		}
-
-		if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
-			DBG(" unavailable -- skipping, value %x size %x\n",
-					bar_value, bar_size);
-			continue;
-		}
-
-#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
-		/* Write it out and update our limit */
-		early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-					 bar, bar_value);
-#endif
-
-		*lower_limit = bar_value + bar_size;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose, top_bus,
-						 current_bus,
-						 pci_devfn,
-						 bar,
-						 0x00000000);
-		}
-
-		DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
-
-		bar_nr++;
-	}
-
-}
-
-static void __init
-pciauto_prescan_setup_bridge(struct pci_channel *hose,
-			     int top_bus,
-			     int current_bus,
-			     int pci_devfn,
-			     int sub_bus)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-	                        PCI_PRIMARY_BUS, current_bus);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SECONDARY_BUS, sub_bus + 1);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, 0xff);
-
-	/* Align memory and I/O to 1MB and 4KB boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
-		& ~(0x100000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-
-	/* Set base (lower limit) of address range behind bridge. */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
-
-	/* We don't support prefetchable memory for now, so disable */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-				PCI_PREF_MEMORY_BASE, 0);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-				PCI_PREF_MEMORY_LIMIT, 0);
-}
-
-static void __init
-pciauto_postscan_setup_bridge(struct pci_channel *hose,
-			      int top_bus,
-			      int current_bus,
-			      int pci_devfn,
-			      int sub_bus)
-{
-	u32 temp;
-
-	/*
-	 * [jsun] we always bump up baselines a little, so that if there
-	 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
-	 * spaces.
-	 */
-	pciauto_lower_memspc += 1;
-	pciauto_lower_iospc += 1;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, sub_bus);
-
-	/* Set upper limit of address range behind bridge. */
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose, top_bus, current_bus, pci_devfn,
-		PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
-
-	/* Align memory and I/O to 1MB and 4KB boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
-		& ~(0x100000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, &temp);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
-		| PCI_COMMAND_MASTER);
-}
-
-static void __init
-pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
-			int top_bus,
-			int current_bus,
-			int pci_devfn,
-			int sub_bus)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_PRIMARY_BUS, current_bus);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SECONDARY_BUS, sub_bus + 1);
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, 0xff);
-
-	/* Align memory and I/O to 4KB and 4 byte boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
-		& ~(0x4 - 1);
-
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_IO_BASE_0, pciauto_lower_iospc);
-}
-
-static void __init
-pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
-			int top_bus,
-			int current_bus,
-			int pci_devfn,
-			int sub_bus)
-{
-	u32 temp;
-
-	/*
-	 * [jsun] we always bump up baselines a little, so that if there
-	 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
-	 * spaces.
-	 */
-	pciauto_lower_memspc += 1;
-	pciauto_lower_iospc += 1;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-
-	early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-				PCI_SUBORDINATE_BUS, sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	/* Align memory and I/O to 4KB and 4 byte boundaries. */
-	pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
-		& ~(0x1000 - 1);
-	pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
-		& ~(0x4 - 1);
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, &temp);
-	early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-		PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_MASTER);
-}
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-static int __init
-pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
-{
-	int sub_bus;
-	u32 pci_devfn, pci_class, cmdstat, found_multi=0;
-	unsigned short vid, did;
-	unsigned char header_type;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-
-	sub_bus = current_bus;
-
-	if (hose->first_devfn)
-		devfn_start = hose->first_devfn;
-	if (hose->last_devfn)
-		devfn_stop = hose->last_devfn;
-
-	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-				       PCI_VENDOR_ID, &vid);
-
-		if (vid == 0xffff) continue;
-
-		early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
-				       PCI_HEADER_TYPE, &header_type);
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-				       PCI_DEVICE_ID, &did);
-
-		early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-
-		DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
-			current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
-			pci_class >> 16, vid, did);
-		if (pci_class & 0xff)
-			DBG(" (rev %.2x)", pci_class & 0xff);
-		DBG("\n");
-
-		if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
-			DBG("        Bridge: primary=%.2x, secondary=%.2x\n",
-				current_bus, sub_bus + 1);
-			pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
-						     pci_devfn, sub_bus);
-			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
-				sub_bus + 1,
-				pciauto_lower_iospc, pciauto_lower_memspc);
-			sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
-			DBG("Back to bus %.2x\n", current_bus);
-			pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
-							pci_devfn, sub_bus);
-			continue;
-		} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-			DBG("  CARDBUS  Bridge: primary=%.2x, secondary=%.2x\n",
-				current_bus, sub_bus + 1);
-			DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-			/* Place CardBus Socket/ExCA registers */
-			pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
-
-			pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
-					current_bus, pci_devfn, sub_bus);
-
-			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
-				sub_bus + 1,
-				pciauto_lower_iospc, pciauto_lower_memspc);
-			sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
-			DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
-			pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
-					current_bus, pci_devfn, sub_bus);
-			continue;
-		} else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-
-			unsigned char prg_iface;
-
-			early_read_config_byte(hose, top_bus, current_bus,
-				pci_devfn, PCI_CLASS_PROG, &prg_iface);
-			if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-				DBG("Skipping legacy mode IDE controller\n");
-				continue;
-			}
-		}
-
-		/*
-		 * Found a peripheral, enable some standard
-		 * settings
-		 */
-		early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
-					PCI_COMMAND, &cmdstat);
-		early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
-					 PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
-					 PCI_COMMAND_MEMORY |
-					 PCI_COMMAND_MASTER);
-		early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
-					PCI_LATENCY_TIMER, 0x80);
-
-		/* Allocate PCI I/O and/or memory space */
-		pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
-	}
-	return sub_bus;
-}
-
-int __init
-pciauto_assign_resources(int busno, struct pci_channel *hose)
-{
-	/* setup resource limits */
-	io_resource_inuse = hose->io_resource;
-	mem_resource_inuse = hose->mem_resource;
-
-	pciauto_lower_iospc = io_resource_inuse->start;
-	pciauto_upper_iospc = io_resource_inuse->end + 1;
-	pciauto_lower_memspc = mem_resource_inuse->start;
-	pciauto_upper_memspc = mem_resource_inuse->end + 1;
-	DBG("Autoconfig PCI channel 0x%p\n", hose);
-	DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
-		busno, pciauto_lower_iospc, pciauto_upper_iospc, 
-		pciauto_lower_memspc, pciauto_upper_memspc);
-
-	return pciauto_bus_scan(hose, busno, busno);
-}
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
deleted file mode 100644
index 8c332b2a464..00000000000
--- a/arch/sh/drivers/pci/pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/sh/drivers/pci/pci.c
- *
- * Copyright (c) 2002 M. R. Brown  <mrbrown@linux-sh.org>
- * Copyright (c) 2004 - 2006 Paul Mundt  <lethal@linux-sh.org>
- *
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * These routines require the following board-specific routines:
- * void pcibios_fixup_irqs();
- *
- * See include/asm-sh/pci.h for more information.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/dma-debug.h>
-#include <asm/io.h>
-
-static int __init pcibios_init(void)
-{
-	struct pci_channel *p;
-	struct pci_bus *bus;
-	int busno;
-
-	/* init channels */
-	busno = 0;
-	for (p = board_pci_channels; p->init; p++) {
-		if (p->init(p) == 0)
-			p->enabled = 1;
-		else
-			pr_err("Unable to init pci channel %d\n", busno);
-		busno++;
-	}
-
-#ifdef CONFIG_PCI_AUTO
-	/* assign resources */
-	busno = 0;
-	for (p = board_pci_channels; p->init; p++)
-		if (p->enabled)
-			busno = pciauto_assign_resources(busno, p) + 1;
-#endif
-
-	/* scan the buses */
-	busno = 0;
-	for (p = board_pci_channels; p->init; p++) {
-		if (p->enabled) {
-			bus = pci_scan_bus(busno, p->pci_ops, p);
-			busno = bus->subordinate + 1;
-		}
-	}
-
-	pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
-
-	dma_debug_add_bus(&pci_bus_type);
-
-	return 0;
-}
-subsys_initcall(pcibios_init);
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
-{
-	pci_read_bridge_bases(bus);
-}
-
-EXPORT_SYMBOL(board_pci_channels);
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index f36c7899295..f910121559b 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -19,8 +19,6 @@
 struct pci_channel {
 	struct pci_channel	*next;
 
-	int			(*init)(struct pci_channel *chan);
-
 	struct pci_ops		*pci_ops;
 	struct resource		*io_resource;
 	struct resource		*mem_resource;
@@ -28,20 +26,11 @@ struct pci_channel {
 	unsigned long		io_offset;
 	unsigned long		mem_offset;
 
-	int			first_devfn;
-	int			last_devfn;
-	int			enabled;
-
 	unsigned long		reg_base;
 
 	unsigned long		io_map_base;
 };
 
-/*
- * Each board initializes this array and terminates it with a NULL entry.
- */
-extern struct pci_channel board_pci_channels[];
-
 extern void register_pci_controller(struct pci_channel *hose);
 
 extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
@@ -122,13 +111,8 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 #endif
 
 /* Board-specific fixup routines. */
-int pcibios_init_platform(void);
 int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
-#ifdef CONFIG_PCI_AUTO
-int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
-
 extern void pcibios_resource_to_bus(struct pci_dev *dev,
 	struct pci_bus_region *region, struct resource *res);