avr32: Allow selecting multiple pins at once

at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

7 files changed, 212 insertions, 148 deletions

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 65db3d26696..6c54580a66d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -194,7 +194,7 @@ static int __init atngw100_init(void)
 	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
 	 * but it's not available off-board.
 	 */
-	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 32aceec0ae7..2bcea80b274 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index acc61235b89..2bc300c3471 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -94,7 +94,7 @@ static void __init atstk1003_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 949c13ec51e..5d485597171 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -99,7 +99,7 @@ static void __init atstk1004_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 5d00bb8d3cc..813b6844cdf 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -82,8 +82,9 @@ static struct platform_device _name##_id##_device = {		\
 	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
 }
 
-#define select_peripheral(pin, periph, flags)			\
-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+#define select_peripheral(port, pin_mask, periph, flags)	\
+	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
+			   GPIO_##periph, flags)
 
 #define DEV_CLK(_name, devname, bus, _index)			\
 static struct clk devname##_##_name = {				\
@@ -871,6 +872,7 @@ static struct clk atmel_psif1_pclk = {
 struct platform_device *__init at32_add_device_psif(unsigned int id)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!(id == 0 || id == 1))
 		return NULL;
@@ -881,20 +883,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
 
 	switch (id) {
 	case 0:
+		pin_mask  = (1 << 8) | (1 << 9); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif0_resource,
 					ARRAY_SIZE(atmel_psif0_resource)))
 			goto err_add_resources;
 		atmel_psif0_pclk.dev = &pdev->dev;
-		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 		break;
 	case 1:
+		pin_mask  = (1 << 11) | (1 << 12); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif1_resource,
 					ARRAY_SIZE(atmel_psif1_resource)))
 			goto err_add_resources;
 		atmel_psif1_pclk.dev = &pdev->dev;
-		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
 		break;
 	default:
 		return NULL;
@@ -958,26 +962,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
 
 static inline void configure_usart0_pins(void)
 {
-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart1_pins(void)
 {
-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 }
 
 static inline void configure_usart2_pins(void)
 {
-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart3_pins(void)
 {
-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static struct platform_device *__initdata at32_usarts[4];
@@ -1057,59 +1065,69 @@ struct platform_device *__init
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &macb0_device;
 
-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+		pin_mask  = (1 << 3);	/* TXD0 */
+		pin_mask |= (1 << 4);	/* TXD1 */
+		pin_mask |= (1 << 7);	/* TXEN */
+		pin_mask |= (1 << 8);	/* TXCK */
+		pin_mask |= (1 << 9);	/* RXD0 */
+		pin_mask |= (1 << 10);	/* RXD1 */
+		pin_mask |= (1 << 13);	/* RXER */
+		pin_mask |= (1 << 15);	/* RXDV */
+		pin_mask |= (1 << 16);	/* MDC  */
+		pin_mask |= (1 << 17);	/* MDIO */
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+			pin_mask |= (1 << 0);	/* COL  */
+			pin_mask |= (1 << 1);	/* CRS  */
+			pin_mask |= (1 << 2);	/* TXER */
+			pin_mask |= (1 << 5);	/* TXD2 */
+			pin_mask |= (1 << 6);	/* TXD3 */
+			pin_mask |= (1 << 11);	/* RXD2 */
+			pin_mask |= (1 << 12);	/* RXD3 */
+			pin_mask |= (1 << 14);	/* RXCK */
+			pin_mask |= (1 << 18);	/* SPD  */
 		}
+
+		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
+
 		break;
 
 	case 1:
 		pdev = &macb1_device;
 
-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+		pin_mask  = (1 << 13);	/* TXD0 */
+		pin_mask |= (1 << 14);	/* TXD1 */
+		pin_mask |= (1 << 11);	/* TXEN */
+		pin_mask |= (1 << 12);	/* TXCK */
+		pin_mask |= (1 << 10);	/* RXD0 */
+		pin_mask |= (1 << 6);	/* RXD1 */
+		pin_mask |= (1 << 5);	/* RXER */
+		pin_mask |= (1 << 4);	/* RXDV */
+		pin_mask |= (1 << 3);	/* MDC  */
+		pin_mask |= (1 << 2);	/* MDIO */
+
+		if (!data->is_rmii)
+			pin_mask |= (1 << 15);	/* SPD  */
+
+		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+			pin_mask  = (1 << 19);	/* COL  */
+			pin_mask |= (1 << 23);	/* CRS  */
+			pin_mask |= (1 << 26);	/* TXER */
+			pin_mask |= (1 << 27);	/* TXD2 */
+			pin_mask |= (1 << 28);	/* TXD3 */
+			pin_mask |= (1 << 29);	/* RXD2 */
+			pin_mask |= (1 << 30);	/* RXD3 */
+			pin_mask |= (1 << 24);	/* RXCK */
+
+			select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
 		}
 		break;
 
@@ -1177,23 +1195,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
 		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &atmel_spi0_device;
+		pin_mask  = (1 << 1) | (1 << 2);	/* MOSI & SCK */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		at32_spi_setup_slaves(0, b, n, spi0_pins);
 		break;
 
 	case 1:
 		pdev = &atmel_spi1_device;
+		pin_mask  = (1 << 1) | (1 << 5);	/* MOSI */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
 		at32_spi_setup_slaves(1, b, n, spi1_pins);
 		break;
 
@@ -1226,6 +1249,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 						    unsigned int n)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -1238,8 +1262,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 				ARRAY_SIZE(atmel_twi0_resource)))
 		goto err_add_resources;
 
-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+	pin_mask  = (1 << 6) | (1 << 7);	/* SDA & SDL */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
@@ -1274,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct platform_device		*pdev;
 	struct dw_dma_slave		*dws;
+	u32				pioa_mask;
+	u32				piob_mask;
 
 	if (id != 0 || !data)
 		return NULL;
@@ -1311,17 +1338,17 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		goto fail;
 
 	/* CLK line is common to both slots */
-	select_peripheral(PA(10), PERIPH_A, 0);
+	pioa_mask = 1 << 10;
 
 	switch (data->slot[0].bus_width) {
 	case 4:
-		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+		pioa_mask |= 1 << 13;		/* DATA1 */
+		pioa_mask |= 1 << 14;		/* DATA2 */
+		pioa_mask |= 1 << 15;		/* DATA3 */
 		/* fall through */
 	case 1:
-		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+		pioa_mask |= 1 << 11;		/* CMD	 */
+		pioa_mask |= 1 << 12;		/* DATA0 */
 
 		if (gpio_is_valid(data->slot[0].detect_pin))
 			at32_select_gpio(data->slot[0].detect_pin, 0);
@@ -1335,15 +1362,19 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		goto fail;
 	}
 
+	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
+	piob_mask = 0;
+
 	switch (data->slot[1].bus_width) {
 	case 4:
-		select_peripheral(PB(8),  PERIPH_B, 0);	/* DATA1 */
-		select_peripheral(PB(9),  PERIPH_B, 0);	/* DATA2 */
-		select_peripheral(PB(10), PERIPH_B, 0);	/* DATA3 */
+		piob_mask |= 1 <<  8;		/* DATA1 */
+		piob_mask |= 1 <<  9;		/* DATA2 */
+		piob_mask |= 1 << 10;		/* DATA3 */
 		/* fall through */
 	case 1:
-		select_peripheral(PB(6),  PERIPH_B, 0); /* CMD	 */
-		select_peripheral(PB(7),  PERIPH_B, 0); /* DATA0 */
+		piob_mask |= 1 <<  6;		/* CMD	 */
+		piob_mask |= 1 <<  7;		/* DATA0 */
+		select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
 
 		if (gpio_is_valid(data->slot[1].detect_pin))
 			at32_select_gpio(data->slot[1].detect_pin, 0);
@@ -1412,7 +1443,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	struct fb_monspecs *monspecs;
 	struct fb_videomode *modedb;
 	unsigned int modedb_size;
-	int i;
+	u32 portc_mask, portd_mask, porte_mask;
 
 	/*
 	 * Do a deep copy of the fb data, monspecs and modedb. Make
@@ -1439,25 +1470,16 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
 
 		/* LCDC on port C */
-		for (i = 19; i < 32; i++) {
-			if (pin_mask & (1ULL << i))
-				at32_select_periph(GPIO_PIOC_BASE + i,
-						GPIO_PERIPH_A, 0);
-		}
+		portc_mask = (pin_mask & 0xfff80000) >> 19;
+		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
 
 		/* LCDC on port D */
-		for (i = 0; i < 18; i++) {
-			if (pin_mask & (1ULL << i))
-				at32_select_periph(GPIO_PIOD_BASE + i,
-						GPIO_PERIPH_A, 0);
-		}
+		portd_mask = pin_mask & 0x0003ffff;
+		select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
 
 		/* LCDC on port E */
-		for (i = 0; i < 19; i++) {
-			if (pin_mask & (1ULL << (i + 32)))
-				at32_select_periph(GPIO_PIOE_BASE + i,
-						GPIO_PERIPH_B, 0);
-		}
+		porte_mask = (pin_mask >> 32) & 0x0007ffff;
+		select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
@@ -1506,6 +1528,7 @@ static struct clk atmel_pwm0_mck = {
 struct platform_device *__init at32_add_device_pwm(u32 mask)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!mask)
 		return NULL;
@@ -1521,14 +1544,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
 	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
 		goto out_free_pdev;
 
+	pin_mask = 0;
 	if (mask & (1 << 0))
-		select_peripheral(PA(28), PERIPH_A, 0);
+		pin_mask |= (1 << 28);
 	if (mask & (1 << 1))
-		select_peripheral(PA(29), PERIPH_A, 0);
+		pin_mask |= (1 << 29);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+	pin_mask = 0;
 	if (mask & (1 << 2))
-		select_peripheral(PA(21), PERIPH_B, 0);
+		pin_mask |= (1 << 21);
 	if (mask & (1 << 3))
-		select_peripheral(PA(22), PERIPH_B, 0);
+		pin_mask |= (1 << 22);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 
 	atmel_pwm0_mck.dev = &pdev->dev;
 
@@ -1569,52 +1599,65 @@ struct platform_device *__init
 at32_add_device_ssc(unsigned int id, unsigned int flags)
 {
 	struct platform_device *pdev;
+	u32 pin_mask = 0;
 
 	switch (id) {
 	case 0:
 		pdev = &ssc0_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 21);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 22);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 23);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 24);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 25);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 26);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		break;
 	case 1:
 		pdev = &ssc1_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+			pin_mask |= (1 << 0);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+			pin_mask |= (1 << 1);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+			pin_mask |= (1 << 2);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+			pin_mask |= (1 << 3);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+			pin_mask |= (1 << 4);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+			pin_mask |= (1 << 5);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
 		break;
 	case 2:
 		pdev = &ssc2_device;
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 13);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 14);	/* RD */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 15);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 16);	/* TF */
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 17);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 18);	/* RK */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
 		break;
 	default:
 		return NULL;
@@ -1752,14 +1795,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		unsigned int cs, unsigned int extint)
 {
 	static unsigned int extint_pin_map[4] __initdata = {
-		GPIO_PIN_PB(25),
-		GPIO_PIN_PB(26),
-		GPIO_PIN_PB(27),
-		GPIO_PIN_PB(28),
+		(1 << 25),
+		(1 << 26),
+		(1 << 27),
+		(1 << 28),
 	};
 	static bool common_pins_initialized __initdata = false;
 	unsigned int extint_pin;
 	int ret;
+	u32 pin_mask;
 
 	if (extint >= ARRAY_SIZE(extint_pin_map))
 		return -EINVAL;
@@ -1773,7 +1817,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		/* NCS4   -> OE_N  */
+		select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
@@ -1783,7 +1828,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+		/* NCS5   -> OE_N  */
+		select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
@@ -1791,14 +1837,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 	}
 
 	if (!common_pins_initialized) {
-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		pin_mask  = (1 << 19);	/* CFCE1  -> CS0_N */
+		pin_mask |= (1 << 20);	/* CFCE2  -> CS1_N */
+		pin_mask |= (1 << 23);	/* CFRNW  -> DIR   */
+		pin_mask |= (1 << 24);	/* NWAIT  <- IORDY */
+
+		select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
+
 		common_pins_initialized = true;
 	}
 
-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
 
 	pdev->resource[1].start = EIM_IRQ_BASE + extint;
 	pdev->resource[1].end = pdev->resource[1].start;
@@ -1937,6 +1986,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
 	struct ac97c_platform_data _data;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -1963,10 +2013,10 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 				sizeof(struct ac97c_platform_data)))
 		goto fail;
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+	pin_mask  = (1 << 20) | (1 << 21);	/* SDO & SYNC */
+	pin_mask |= (1 << 22) | (1 << 23);	/* SCLK & SDI */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 
 	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
 	if (data->reset_pin != GPIO_PIN_NONE)
@@ -2008,6 +2058,7 @@ static struct clk abdac0_sample_clk = {
 struct platform_device *__init at32_add_device_abdac(unsigned int id)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -2020,10 +2071,10 @@ struct platform_device *__init at32_add_device_abdac(unsigned int id)
 				ARRAY_SIZE(abdac0_resource)))
 		goto err_add_resources;
 
-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+	pin_mask  = (1 << 20) | (1 << 22);	/* DATA1 & DATAN1 */
+	pin_mask |= (1 << 21) | (1 << 23);	/* DATA0 & DATAN0 */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
 
 	abdac0_pclk.dev = &pdev->dev;
 	abdac0_sample_clk.dev = &pdev->dev;
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
index 4bbf99ec2c4..21c79373b53 100644
--- a/arch/avr32/mach-at32ap/include/mach/portmux.h
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -21,8 +21,8 @@
 #define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
 #define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
 
-void at32_select_periph(unsigned int pin, unsigned int periph,
-			unsigned long flags);
+void at32_select_periph(unsigned int port, unsigned int pin,
+			unsigned int periph, unsigned long flags);
 void at32_select_gpio(unsigned int pin, unsigned long flags);
 void at32_deselect_pin(unsigned int pin);
 void at32_reserve_pin(unsigned int pin);
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index ef2561e1539..ed81a8bcb22 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -50,35 +50,48 @@ static struct pio_device *gpio_to_pio(unsigned int gpio)
 }
 
 /* Pin multiplexing API */
+static DEFINE_SPINLOCK(pio_lock);
 
-void __init at32_select_periph(unsigned int pin, unsigned int periph,
-			       unsigned long flags)
+void __init at32_select_periph(unsigned int port, u32 pin_mask,
+			       unsigned int periph, unsigned long flags)
 {
 	struct pio_device *pio;
-	unsigned int pin_index = pin & 0x1f;
-	u32 mask = 1 << pin_index;
 
-	pio = gpio_to_pio(pin);
+	/* assign and verify pio */
+	pio = gpio_to_pio(port);
 	if (unlikely(!pio)) {
-		printk("pio: invalid pin %u\n", pin);
+		printk(KERN_WARNING "pio: invalid port %u\n", port);
 		goto fail;
 	}
 
-	if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask)
-			 || gpiochip_is_requested(&pio->chip, pin_index))) {
-		printk("%s: pin %u is busy\n", pio->name, pin_index);
+	/* Test if any of the requested pins is already muxed */
+	spin_lock(&pio_lock);
+	if (unlikely(pio->pinmux_mask & pin_mask)) {
+		printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n",
+		       pio->name, pin_mask, pio->pinmux_mask & pin_mask);
+		spin_unlock(&pio_lock);
 		goto fail;
 	}
 
-	pio_writel(pio, PUER, mask);
+	pio->pinmux_mask |= pin_mask;
+
+	/* enable pull ups */
+	pio_writel(pio, PUER, pin_mask);
+
+	/* select either peripheral A or B */
 	if (periph)
-		pio_writel(pio, BSR, mask);
+		pio_writel(pio, BSR, pin_mask);
 	else
-		pio_writel(pio, ASR, mask);
+		pio_writel(pio, ASR, pin_mask);
+
+	/* enable peripheral control */
+	pio_writel(pio, PDR, pin_mask);
 
-	pio_writel(pio, PDR, mask);
+	/* Disable pull ups if not requested. */
 	if (!(flags & AT32_GPIOF_PULLUP))
-		pio_writel(pio, PUDR, mask);
+		pio_writel(pio, PUDR, pin_mask);
+
+	spin_unlock(&pio_lock);
 
 	return;