Merge tag 'intr-remapping-ops-for-ingo' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into core/iommu

- This patchset introduces a generic ops-interface for
  accessing interrupt remapping hardware on x86. It factors
  out the VT-d specific code from io_apic.c and moves it to
  drivers/iommu. These changes will be used to add support for
  AMD interrupt remapping hardware.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

4 files changed, 171 insertions, 280 deletions

diff --git a/arch/ia64/include/asm/irq_remapping.h b/arch/ia64/include/asm/irq_remapping.h
new file mode 100644
index 00000000000..a8687b1d890
--- /dev/null
+++ b/arch/ia64/include/asm/irq_remapping.h
@@ -0,0 +1,4 @@
+#ifndef __IA64_INTR_REMAPPING_H
+#define __IA64_INTR_REMAPPING_H
+#define irq_remapping_enabled 0
+#endif
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 47d99934580..dcb0c723102 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -1,45 +1,103 @@
-#ifndef _ASM_X86_IRQ_REMAPPING_H
-#define _ASM_X86_IRQ_REMAPPING_H
+/*
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This header file contains the interface of the interrupt remapping code to
+ * the x86 interrupt management code.
+ */
 
-#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
+#ifndef __X86_IRQ_REMAPPING_H
+#define __X86_IRQ_REMAPPING_H
 
 #ifdef CONFIG_IRQ_REMAP
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
-static inline void prepare_irte(struct irte *irte, int vector,
-			        unsigned int dest)
+
+struct IO_APIC_route_entry;
+struct io_apic_irq_attr;
+struct pci_dev;
+
+extern int irq_remapping_enabled;
+
+extern void setup_irq_remapping_ops(void);
+extern int irq_remapping_supported(void);
+extern int irq_remapping_prepare(void);
+extern int irq_remapping_enable(void);
+extern void irq_remapping_disable(void);
+extern int irq_remapping_reenable(int);
+extern int irq_remap_enable_fault_handling(void);
+extern int setup_ioapic_remapped_entry(int irq,
+				       struct IO_APIC_route_entry *entry,
+				       unsigned int destination,
+				       int vector,
+				       struct io_apic_irq_attr *attr);
+extern int set_remapped_irq_affinity(struct irq_data *data,
+				     const struct cpumask *mask,
+				     bool force);
+extern void free_remapped_irq(int irq);
+extern void compose_remapped_msi_msg(struct pci_dev *pdev,
+				     unsigned int irq, unsigned int dest,
+				     struct msi_msg *msg, u8 hpet_id);
+extern int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
+extern int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
+				  int index, int sub_handle);
+extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
+
+#else  /* CONFIG_IRQ_REMAP */
+
+#define irq_remapping_enabled	0
+
+static inline void setup_irq_remapping_ops(void) { }
+static inline int irq_remapping_supported(void) { return 0; }
+static inline int irq_remapping_prepare(void) { return -ENODEV; }
+static inline int irq_remapping_enable(void) { return -ENODEV; }
+static inline void irq_remapping_disable(void) { }
+static inline int irq_remapping_reenable(int eim) { return -ENODEV; }
+static inline int irq_remap_enable_fault_handling(void) { return -ENODEV; }
+static inline int setup_ioapic_remapped_entry(int irq,
+					      struct IO_APIC_route_entry *entry,
+					      unsigned int destination,
+					      int vector,
+					      struct io_apic_irq_attr *attr)
+{
+	return -ENODEV;
+}
+static inline int set_remapped_irq_affinity(struct irq_data *data,
+					    const struct cpumask *mask,
+					    bool force)
 {
-	memset(irte, 0, sizeof(*irte));
-
-	irte->present = 1;
-	irte->dst_mode = apic->irq_dest_mode;
-	/*
-	 * Trigger mode in the IRTE will always be edge, and for IO-APIC, the
-	 * actual level or edge trigger will be setup in the IO-APIC
-	 * RTE. This will help simplify level triggered irq migration.
-	 * For more details, see the comments (in io_apic.c) explainig IO-APIC
-	 * irq migration in the presence of interrupt-remapping.
-	*/
-	irte->trigger_mode = 0;
-	irte->dlvry_mode = apic->irq_delivery_mode;
-	irte->vector = vector;
-	irte->dest_id = IRTE_DEST(dest);
-	irte->redir_hint = 1;
+	return 0;
 }
-static inline bool irq_remapped(struct irq_cfg *cfg)
+static inline void free_remapped_irq(int irq) { }
+static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
+					    unsigned int irq, unsigned int dest,
+					    struct msi_msg *msg, u8 hpet_id)
 {
-	return cfg->irq_2_iommu.iommu != NULL;
 }
-#else
-static void prepare_irte(struct irte *irte, int vector, unsigned int dest)
+static inline int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
 {
+	return -ENODEV;
 }
-static inline bool irq_remapped(struct irq_cfg *cfg)
+static inline int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
+					 int index, int sub_handle)
 {
-	return false;
+	return -ENODEV;
 }
-static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
 {
+	return -ENODEV;
 }
-#endif
+#endif /* CONFIG_IRQ_REMAP */
 
-#endif	/* _ASM_X86_IRQ_REMAPPING_H */
+#endif /* __X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index edc24480469..3722179a49d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -35,6 +35,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 
+#include <asm/irq_remapping.h>
 #include <asm/perf_event.h>
 #include <asm/x86_init.h>
 #include <asm/pgalloc.h>
@@ -1441,8 +1442,8 @@ void __init bsp_end_local_APIC_setup(void)
 	 * Now that local APIC setup is completed for BP, configure the fault
 	 * handling for interrupt remapping.
 	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
+	if (irq_remapping_enabled)
+		irq_remap_enable_fault_handling();
 
 }
 
@@ -1517,7 +1518,7 @@ void enable_x2apic(void)
 int __init enable_IR(void)
 {
 #ifdef CONFIG_IRQ_REMAP
-	if (!intr_remapping_supported()) {
+	if (!irq_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
 		return -1;
 	}
@@ -1528,7 +1529,7 @@ int __init enable_IR(void)
 		return -1;
 	}
 
-	return enable_intr_remapping();
+	return irq_remapping_enable();
 #endif
 	return -1;
 }
@@ -1537,10 +1538,13 @@ void __init enable_IR_x2apic(void)
 {
 	unsigned long flags;
 	int ret, x2apic_enabled = 0;
-	int dmar_table_init_ret;
+	int hardware_init_ret;
 
-	dmar_table_init_ret = dmar_table_init();
-	if (dmar_table_init_ret && !x2apic_supported())
+	/* Make sure irq_remap_ops are initialized */
+	setup_irq_remapping_ops();
+
+	hardware_init_ret = irq_remapping_prepare();
+	if (hardware_init_ret && !x2apic_supported())
 		return;
 
 	ret = save_ioapic_entries();
@@ -1556,7 +1560,7 @@ void __init enable_IR_x2apic(void)
 	if (x2apic_preenabled && nox2apic)
 		disable_x2apic();
 
-	if (dmar_table_init_ret)
+	if (hardware_init_ret)
 		ret = -1;
 	else
 		ret = enable_IR();
@@ -2176,8 +2180,8 @@ static int lapic_suspend(void)
 	local_irq_save(flags);
 	disable_local_APIC();
 
-	if (intr_remapping_enabled)
-		disable_intr_remapping();
+	if (irq_remapping_enabled)
+		irq_remapping_disable();
 
 	local_irq_restore(flags);
 	return 0;
@@ -2193,7 +2197,7 @@ static void lapic_resume(void)
 		return;
 
 	local_irq_save(flags);
-	if (intr_remapping_enabled) {
+	if (irq_remapping_enabled) {
 		/*
 		 * IO-APIC and PIC have their own resume routines.
 		 * We just mask them here to make sure the interrupt
@@ -2245,8 +2249,8 @@ static void lapic_resume(void)
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 
-	if (intr_remapping_enabled)
-		reenable_intr_remapping(x2apic_mode);
+	if (irq_remapping_enabled)
+		irq_remapping_reenable(x2apic_mode);
 
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e88300d8e80..ef0648cd708 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -86,6 +86,22 @@ void __init set_io_apic_ops(const struct io_apic_ops *ops)
 	io_apic_ops = *ops;
 }
 
+#ifdef CONFIG_IRQ_REMAP
+static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+	return cfg->irq_2_iommu.iommu != NULL;
+}
+#else
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+	return false;
+}
+static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+}
+#endif
+
 /*
  *      Is the SiS APIC rmw bug present ?
  *      -1 = don't know, 0 = no, 1 = yes
@@ -1361,77 +1377,13 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
 				      fasteoi ? "fasteoi" : "edge");
 }
 
-
-static int setup_ir_ioapic_entry(int irq,
-			      struct IR_IO_APIC_route_entry *entry,
-			      unsigned int destination, int vector,
-			      struct io_apic_irq_attr *attr)
-{
-	int index;
-	struct irte irte;
-	int ioapic_id = mpc_ioapic_id(attr->ioapic);
-	struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
-
-	if (!iommu) {
-		pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
-		return -ENODEV;
-	}
-
-	index = alloc_irte(iommu, irq, 1);
-	if (index < 0) {
-		pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
-		return -ENOMEM;
-	}
-
-	prepare_irte(&irte, vector, destination);
-
-	/* Set source-id of interrupt request */
-	set_ioapic_sid(&irte, ioapic_id);
-
-	modify_irte(irq, &irte);
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
-		"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
-		"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
-		"Avail:%X Vector:%02X Dest:%08X "
-		"SID:%04X SQ:%X SVT:%X)\n",
-		attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
-		irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
-		irte.avail, irte.vector, irte.dest_id,
-		irte.sid, irte.sq, irte.svt);
-
-	memset(entry, 0, sizeof(*entry));
-
-	entry->index2	= (index >> 15) & 0x1;
-	entry->zero	= 0;
-	entry->format	= 1;
-	entry->index	= (index & 0x7fff);
-	/*
-	 * IO-APIC RTE will be configured with virtual vector.
-	 * irq handler will do the explicit EOI to the io-apic.
-	 */
-	entry->vector	= attr->ioapic_pin;
-	entry->mask	= 0;			/* enable IRQ */
-	entry->trigger	= attr->trigger;
-	entry->polarity	= attr->polarity;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (attr->trigger)
-		entry->mask = 1;
-
-	return 0;
-}
-
 static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
 			       unsigned int destination, int vector,
 			       struct io_apic_irq_attr *attr)
 {
-	if (intr_remapping_enabled)
-		return setup_ir_ioapic_entry(irq,
-			 (struct IR_IO_APIC_route_entry *)entry,
-			 destination, vector, attr);
+	if (irq_remapping_enabled)
+		return setup_ioapic_remapped_entry(irq, entry, destination,
+						   vector, attr);
 
 	memset(entry, 0, sizeof(*entry));
 
@@ -1588,7 +1540,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
 {
 	struct IO_APIC_route_entry entry;
 
-	if (intr_remapping_enabled)
+	if (irq_remapping_enabled)
 		return;
 
 	memset(&entry, 0, sizeof(entry));
@@ -1674,7 +1626,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
 
-	if (intr_remapping_enabled) {
+	if (irq_remapping_enabled) {
 		printk(KERN_DEBUG " NR Indx Fmt Mask Trig IRR"
 			" Pol Stat Indx2 Zero Vect:\n");
 	} else {
@@ -1683,7 +1635,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 	}
 
 	for (i = 0; i <= reg_01.bits.entries; i++) {
-		if (intr_remapping_enabled) {
+		if (irq_remapping_enabled) {
 			struct IO_APIC_route_entry entry;
 			struct IR_IO_APIC_route_entry *ir_entry;
 
@@ -2050,7 +2002,7 @@ void disable_IO_APIC(void)
 	 * IOAPIC RTE as well as interrupt-remapping table entry).
 	 * As this gets called during crash dump, keep this simple for now.
 	 */
-	if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) {
+	if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) {
 		struct IO_APIC_route_entry entry;
 
 		memset(&entry, 0, sizeof(entry));
@@ -2074,7 +2026,7 @@ void disable_IO_APIC(void)
 	 * Use virtual wire A mode when interrupt remapping is enabled.
 	 */
 	if (cpu_has_apic || apic_from_smp_config())
-		disconnect_bsp_APIC(!intr_remapping_enabled &&
+		disconnect_bsp_APIC(!irq_remapping_enabled &&
 				ioapic_i8259.pin != -1);
 }
 
@@ -2390,71 +2342,6 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	return ret;
 }
 
-#ifdef CONFIG_IRQ_REMAP
-
-/*
- * Migrate the IO-APIC irq in the presence of intr-remapping.
- *
- * For both level and edge triggered, irq migration is a simple atomic
- * update(of vector and cpu destination) of IRTE and flush the hardware cache.
- *
- * For level triggered, we eliminate the io-apic RTE modification (with the
- * updated vector information), by using a virtual vector (io-apic pin number).
- * Real vector that is used for interrupting cpu will be coming from
- * the interrupt-remapping table entry.
- *
- * As the migration is a simple atomic update of IRTE, the same mechanism
- * is used to migrate MSI irq's in the presence of interrupt-remapping.
- */
-static int
-ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		       bool force)
-{
-	struct irq_cfg *cfg = data->chip_data;
-	unsigned int dest, irq = data->irq;
-	struct irte irte;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return -EINVAL;
-
-	if (get_irte(irq, &irte))
-		return -EBUSY;
-
-	if (assign_irq_vector(irq, cfg, mask))
-		return -EBUSY;
-
-	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * Atomically updates the IRTE with the new destination, vector
-	 * and flushes the interrupt entry cache.
-	 */
-	modify_irte(irq, &irte);
-
-	/*
-	 * After this point, all the interrupts will start arriving
-	 * at the new destination. So, time to cleanup the previous
-	 * vector allocation.
-	 */
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-
-	cpumask_copy(data->affinity, mask);
-	return 0;
-}
-
-#else
-static inline int
-ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		       bool force)
-{
-	return 0;
-}
-#endif
-
 asmlinkage void smp_irq_move_cleanup_interrupt(void)
 {
 	unsigned vector, me;
@@ -2699,7 +2586,7 @@ static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
 	chip->irq_eoi = ir_ack_apic_level;
 
 #ifdef CONFIG_SMP
-	chip->irq_set_affinity = ir_ioapic_set_affinity;
+	chip->irq_set_affinity = set_remapped_irq_affinity;
 #endif
 }
 #endif /* CONFIG_IRQ_REMAP */
@@ -2912,7 +2799,7 @@ static inline void __init check_timer(void)
 	 * 8259A.
 	 */
 	if (pin1 == -1) {
-		if (intr_remapping_enabled)
+		if (irq_remapping_enabled)
 			panic("BIOS bug: timer not connected to IO-APIC");
 		pin1 = pin2;
 		apic1 = apic2;
@@ -2945,7 +2832,7 @@ static inline void __init check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
 		}
-		if (intr_remapping_enabled)
+		if (irq_remapping_enabled)
 			panic("timer doesn't work through Interrupt-remapped IO-APIC");
 		local_irq_disable();
 		clear_IO_APIC_pin(apic1, pin1);
@@ -3169,7 +3056,7 @@ void destroy_irq(unsigned int irq)
 	irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE);
 
 	if (irq_remapped(cfg))
-		free_irte(irq);
+		free_remapped_irq(irq);
 	raw_spin_lock_irqsave(&vector_lock, flags);
 	__clear_irq_vector(irq, cfg);
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
@@ -3198,54 +3085,34 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
 	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 	if (irq_remapped(cfg)) {
-		struct irte irte;
-		int ir_index;
-		u16 sub_handle;
-
-		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
-		BUG_ON(ir_index == -1);
-
-		prepare_irte(&irte, cfg->vector, dest);
-
-		/* Set source-id of interrupt request */
-		if (pdev)
-			set_msi_sid(&irte, pdev);
-		else
-			set_hpet_sid(&irte, hpet_id);
-
-		modify_irte(irq, &irte);
+		compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id);
+		return err;
+	}
 
+	if (x2apic_enabled())
+		msg->address_hi = MSI_ADDR_BASE_HI |
+				  MSI_ADDR_EXT_DEST_ID(dest);
+	else
 		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->data = sub_handle;
-		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
-				  MSI_ADDR_IR_SHV |
-				  MSI_ADDR_IR_INDEX1(ir_index) |
-				  MSI_ADDR_IR_INDEX2(ir_index);
-	} else {
-		if (x2apic_enabled())
-			msg->address_hi = MSI_ADDR_BASE_HI |
-					  MSI_ADDR_EXT_DEST_ID(dest);
-		else
-			msg->address_hi = MSI_ADDR_BASE_HI;
 
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((apic->irq_dest_mode == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
+	msg->address_lo =
+		MSI_ADDR_BASE_LO |
+		((apic->irq_dest_mode == 0) ?
+			MSI_ADDR_DEST_MODE_PHYSICAL:
+			MSI_ADDR_DEST_MODE_LOGICAL) |
+		((apic->irq_delivery_mode != dest_LowestPrio) ?
+			MSI_ADDR_REDIRECTION_CPU:
+			MSI_ADDR_REDIRECTION_LOWPRI) |
+		MSI_ADDR_DEST_ID(dest);
+
+	msg->data =
+		MSI_DATA_TRIGGER_EDGE |
+		MSI_DATA_LEVEL_ASSERT |
+		((apic->irq_delivery_mode != dest_LowestPrio) ?
+			MSI_DATA_DELIVERY_FIXED:
+			MSI_DATA_DELIVERY_LOWPRI) |
+		MSI_DATA_VECTOR(cfg->vector);
 
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
 	return err;
 }
 
@@ -3288,33 +3155,6 @@ static struct irq_chip msi_chip = {
 	.irq_retrigger		= ioapic_retrigger_irq,
 };
 
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
-{
-	struct intel_iommu *iommu;
-	int index;
-
-	iommu = map_dev_to_ir(dev);
-	if (!iommu) {
-		printk(KERN_ERR
-		       "Unable to map PCI %s to iommu\n", pci_name(dev));
-		return -ENOENT;
-	}
-
-	index = alloc_irte(iommu, irq, nvec);
-	if (index < 0) {
-		printk(KERN_ERR
-		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
-		       pci_name(dev));
-		return -ENOSPC;
-	}
-	return index;
-}
-
 static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
 {
 	struct irq_chip *chip = &msi_chip;
@@ -3345,7 +3185,6 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	int node, ret, sub_handle, index = 0;
 	unsigned int irq, irq_want;
 	struct msi_desc *msidesc;
-	struct intel_iommu *iommu = NULL;
 
 	/* x86 doesn't support multiple MSI yet */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
@@ -3359,7 +3198,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		if (irq == 0)
 			return -1;
 		irq_want = irq + 1;
-		if (!intr_remapping_enabled)
+		if (!irq_remapping_enabled)
 			goto no_ir;
 
 		if (!sub_handle) {
@@ -3367,23 +3206,16 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 			 * allocate the consecutive block of IRTE's
 			 * for 'nvec'
 			 */
-			index = msi_alloc_irte(dev, irq, nvec);
+			index = msi_alloc_remapped_irq(dev, irq, nvec);
 			if (index < 0) {
 				ret = index;
 				goto error;
 			}
 		} else {
-			iommu = map_dev_to_ir(dev);
-			if (!iommu) {
-				ret = -ENOENT;
+			ret = msi_setup_remapped_irq(dev, irq, index,
+						     sub_handle);
+			if (ret < 0)
 				goto error;
-			}
-			/*
-			 * setup the mapping between the irq and the IRTE
-			 * base index, the sub_handle pointing to the
-			 * appropriate interrupt remap table entry.
-			 */
-			set_irte_irq(irq, iommu, index, sub_handle);
 		}
 no_ir:
 		ret = setup_msi_irq(dev, msidesc, irq);
@@ -3501,15 +3333,8 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
 	struct msi_msg msg;
 	int ret;
 
-	if (intr_remapping_enabled) {
-		struct intel_iommu *iommu = map_hpet_to_ir(id);
-		int index;
-
-		if (!iommu)
-			return -1;
-
-		index = alloc_irte(iommu, irq, 1);
-		if (index < 0)
+	if (irq_remapping_enabled) {
+		if (!setup_hpet_msi_remapped(irq, id))
 			return -1;
 	}
 
@@ -3888,8 +3713,8 @@ void __init setup_ioapic_dest(void)
 		else
 			mask = apic->target_cpus();
 
-		if (intr_remapping_enabled)
-			ir_ioapic_set_affinity(idata, mask, false);
+		if (irq_remapping_enabled)
+			set_remapped_irq_affinity(idata, mask, false);
 		else
 			ioapic_set_affinity(idata, mask, false);
 	}