Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits) sh: Fix occasional flush_cache_4096() stack corruption. sh: Calculate shm alignment at runtime. sh: dma-mapping compile fixes. sh: Initial vsyscall page support. sh: Clean up PAGE_SIZE definition for assembly use. sh: Selective flush_cache_mm() flushing. sh: More intelligent entry_mask/way_size calculation. sh: Support for L2 cache on newer SH-4A CPUs. sh: Update kexec support for API changes. sh: Optimized readsl()/writesl() support. sh: Report movli.l/movco.l capabilities. sh: CPU flags in AT_HWCAP in ELF auxvt. sh: Add support for 4K stacks. sh: Enable /proc/kcore support. sh: stack debugging support. sh: select CONFIG_EMBEDDED. sh: machvec rework. sh: Solution Engine SH7343 board support. sh: SH7710VoIPGW board support. sh: Enable verbose BUG() support. ...
author: Linus Torvalds <torvalds@g5.osdl.org> 2006-09-27 08:49:07 -0700
committer: Linus Torvalds <torvalds@g5.osdl.org> 2006-09-27 08:49:07 -0700
commit: b98adfccdf5f8dd34ae56a2d5adbe2c030bd4674 (patch)
tree: 1807a029520f550dd4f90c95ad0063bceb00d645 /arch
parent: ba21fe71725f94792330ebc3034ef2b35a36276f (diff)
parent: 33573c0e3243aaa38b6ad96942de85a1b713c2ff (diff)
237 files changed, 17228 insertions, 6583 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1a0db1d4c95..1cc5c9b27bf 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
 	bool
 	default y
+	select EMBEDDED
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -51,18 +52,23 @@ source "init/Kconfig"
 
 menu "System type"
 
+config SOLUTION_ENGINE
+	bool
+
 choice
 	prompt "SuperH system type"
 	default SH_UNKNOWN
 
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
+	select SOLUTION_ENGINE
 	help
 	  Select SolutionEngine if configuring for a Hitachi SH7709
 	  or SH7750 evaluation board.
 
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
 	select CPU_SUBTYPE_SH7751
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
@@ -70,17 +76,27 @@ config SH_7751_SOLUTION_ENGINE
 
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"
+	select SOLUTION_ENGINE
 	select CPU_SUBTYPE_SH7300
 	help
-	  Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
-	  evaluation board.
+	  Select 7300 SolutionEngine if configuring for a Hitachi
+	  SH7300(SH-Mobile V) evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
 
 config SH_73180_SOLUTION_ENGINE
        bool "SolutionEngine73180"
-       select CPU_SUBTYPE_SH73180
-       help
-         Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
-         evaluation board.
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH73180
+	help
+	  Select 73180 SolutionEngine if configuring for a Hitachi
+	  SH73180(SH-Mobile 3) evaluation board.
 
 config SH_7751_SYSTEMH
 	bool "SystemH7751R"
@@ -89,12 +105,6 @@ config SH_7751_SYSTEMH
 	  Select SystemH if you are configuring for a Renesas SystemH
 	  7751R evaluation board.
 
-config SH_STB1_HARP
-	bool "STB1_Harp"
-
-config SH_STB1_OVERDRIVE
-	bool "STB1_Overdrive"
-
 config SH_HP6XX
 	bool "HP6XX"
 	help
@@ -102,19 +112,6 @@ config SH_HP6XX
 	  More information (hardware only) at
 	  <http://www.hp.com/jornada/>.
 
-config SH_CQREEK
-	bool "CqREEK"
-	help
-	  Select CqREEK if configuring for a CqREEK SH7708 or SH7750.
-	  More information at
-	  <http://sources.redhat.com/ecos/hardware.html#SuperH>.
-
-config SH_DMIDA
-	bool "DMIDA"
-	help
-	  Select DMIDA if configuring for a DataMyte 4000 Industrial
-	  Digital Assistant. More information at <http://www.dmida.com/>.
-
 config SH_EC3104
 	bool "EC3104"
 	help
@@ -136,25 +133,9 @@ config SH_DREAMCAST
 	  <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
 	  Dreamcast project is at <http://linuxdc.sourceforge.net/>.
 
-config SH_CAT68701
-	bool "CAT68701"
-
 config SH_BIGSUR
 	bool "BigSur"
 
-config SH_SH2000
-	bool "SH2000"
-	select CPU_SUBTYPE_SH7709
-	help
-	  SH-2000 is a single-board computer based around SH7709A chip
-	  intended for embedded applications.
-	  It has an Ethernet interface (CS8900A), direct connected
-	  Compact Flash socket, three serial ports and PC-104 bus.
-	  More information at <http://sh2000.sh-linux.org>.
-
-config SH_ADX
-	bool "ADX"
-
 config SH_MPC1211
 	bool "Interface MPC1211"
 	help
@@ -184,6 +165,13 @@ config SH_HS7751RVOIP
 	  Select HS7751RVOIP if configuring for a Renesas Technology
 	  Sales VoIP board.
 
+config SH_7710VOIPGW
+	bool "SH7710-VOIP-GW"
+	select CPU_SUBTYPE_SH7710
+	help
+	  Select this option to build a kernel for the SH7710 based
+	  VOIP GW.
+
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	select CPU_SUBTYPE_SH7751R
@@ -222,6 +210,12 @@ config SH_TITAN
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
 
+config SH_SHMIN
+	bool "SHMIN"
+	select CPU_SUBTYPE_SH7706
+	help
+	  Select SHMIN if configureing for the SHMIN board
+
 config SH_UNKNOWN
 	bool "BareCPU"
 	help
@@ -238,35 +232,9 @@ endchoice
 
 source "arch/sh/mm/Kconfig"
 
-config MEMORY_START
-	hex "Physical memory start address"
-	default "0x08000000"
-	---help---
-	  Computers built with Hitachi SuperH processors always
-	  map the ROM starting at address zero.  But the processor
-	  does not specify the range that RAM takes.
-
-	  The physical memory (RAM) start address will be automatically
-	  set to 08000000. Other platforms, such as the Solution Engine
-	  boards typically map RAM at 0C000000.
-
-	  Tweak this only when porting to a new machine which does not
-	  already have a defconfig. Changing it from the known correct
-	  value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
-	hex "Physical memory size"
-	default "0x00400000"
-	help
-	  This sets the default memory size assumed by your SH kernel. It can
-	  be overridden as normal by the 'mem=' argument on the kernel command
-	  line. If unsure, consult your board specifications or just leave it
-	  as 0x00400000 which was the default value before this became
-	  configurable.
-
 config CF_ENABLER
 	bool "Compact Flash Enabler support"
-	depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
+	depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
 	---help---
 	  Compact Flash is a small, removable mass storage device introduced
 	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
@@ -294,7 +262,7 @@ config CF_AREA5
 	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
 	  - "Area6" if it is connected to Area 6 (0x18000000)
 
-	  "Area6" will work for most boards. For ADX, select "Area5".
+	  "Area6" will work for most boards.
 
 config CF_AREA6
 	bool "Area6"
@@ -316,19 +284,6 @@ config CPU_LITTLE_ENDIAN
 	  endian byte order. These modes require different kernels. Say Y if
 	  your machine is little endian, N if it's a big endian machine.
 
-# The SH7750 RTC module is disabled in the Dreamcast
-config SH_RTC
-	bool
-	depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && \
-		   !SH_73180_SOLUTION_ENGINE && !SH_LANDISK && \
-		   !SH_R7780RP
-	default y
-	help
-	  Selecting this option will allow the Linux kernel to emulate
-	  PC's RTC.
-
-	  If unsure, say N.
-
 config SH_FPU
 	bool "FPU support"
 	depends on !CPU_SH3
@@ -339,14 +294,22 @@ config SH_FPU
 
 	  This option must be set in order to enable the FPU.
 
+config SH_FPU_EMU
+	bool "FPU emulation support"
+	depends on !SH_FPU && EXPERIMENTAL
+	default n
+	help
+	  Selecting this option will enable support for software FPU emulation.
+	  Most SH-3 users will want to say Y here, whereas most SH-4 users will
+	  want to say N.
+
 config SH_DSP
 	bool "DSP support"
-	depends on !CPU_SH4
-	default y
+	default y if SH4AL_DSP || !CPU_SH4
+	default n
 	help
 	  Selecting this option will enable support for SH processors that
-	  have DSP units (ie, SH2-DSP and SH3-DSP). It is safe to say Y here
-	  by default, as the existance of the DSP will be probed at runtime.
+	  have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
 
 	  This option must be set in order to enable the DSP.
 
@@ -373,6 +336,9 @@ config CPU_HAS_INTEVT
 config CPU_HAS_PINT_IRQ
 	bool
 
+config CPU_HAS_MASKREG_IRQ
+	bool
+
 config CPU_HAS_INTC2_IRQ
 	bool
 
@@ -400,16 +366,19 @@ config SH_TMU
 
 endmenu
 
-#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 
-#source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
 	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
 	default "60000000" if CPU_SUBTYPE_SH7751
-	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760
-	default "27000000" if CPU_SUBTYPE_SH73180
+	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
+			      CPU_SUBTYPE_SH7760
+	default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	help
 	  This option is used to specify the peripheral clock frequency.
@@ -440,10 +409,8 @@ source "arch/sh/cchips/Kconfig"
 
 config HEARTBEAT
 	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \
-		   SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \
-		   SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \
-		   SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \
+	depends on SH_MPC1211 || SH_SH03 || \
+		   SH_BIGSUR || SOLUTION_ENGINE || \
 		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
@@ -459,6 +426,8 @@ config ISA_DMA_API
 
 menu "Kernel features"
 
+source kernel/Kconfig.hz
+
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -476,10 +445,6 @@ config KEXEC
 	  support.  As of this writing the exact hardware interface is
 	  strongly in flux, so no good recommendation can be made.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
@@ -515,6 +480,8 @@ config NR_CPUS
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
 
+source "kernel/Kconfig.preempt"
+
 config CPU_HAS_SR_RB
 	bool "CPU has SR.RB"
 	depends on CPU_SH3 || CPU_SH4
@@ -636,6 +603,16 @@ source "fs/Kconfig.binfmt"
 
 endmenu
 
+menu "Power management options (EXPERIMENTAL)"
+depends on EXPERIMENTAL
+
+source kernel/power/Kconfig
+
+config APM
+	bool "Advanced Power Management Emulation"
+	depends on PM
+endmenu
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8fb31ab2c02..48479e014da 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -30,8 +30,35 @@ config EARLY_PRINTK
 	  when the kernel may crash or hang before the serial console is
 	  initialised. If unsure, say N.
 
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL
+	help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config 4KSTACKS
+	bool "Use 4Kb for kernel stacks instead of 8Kb"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here the kernel will use a 4Kb stacksize for the
+	  kernel stack attached to each process/thread. This facilitates
+	  running more threads on a system and also reduces the pressure
+	  on the VM subsystem for higher order allocations. This option
+	  will also use IRQ stacks to compensate for the reduced stackspace.
+
 config KGDB
 	bool "Include KGDB kernel debugger"
+	select FRAME_POINTER
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
@@ -112,13 +139,4 @@ endchoice
 
 endmenu
 
-config FRAME_POINTER
-	bool "Compile the kernel with frame pointers"
-	default y if KGDB
-	help
-	  If you say Y here the resulting kernel image will be slightly larger
-	  and slower, but it will give very useful debugging information.
-	  If you don't debug the kernel, you can say N, but we may not be able
-	  to solve problems without frame pointers.
-
 endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index e467a450662..26d62ff51a6 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -18,11 +18,13 @@ cflags-y				:= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	:= -ml
 
 isa-y					:= any
+isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
+isa-$(CONFIG_CPU_SH2A)			:= sh2a
 isa-$(CONFIG_CPU_SH3)			:= sh3
 isa-$(CONFIG_CPU_SH4)			:= sh4
 isa-$(CONFIG_CPU_SH4A)			:= sh4a
-isa-$(CONFIG_CPU_SH2A)			:= sh2a
+isa-$(CONFIG_CPU_SH4AL_DSP)		:= sh4al
 
 isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp
 
@@ -30,9 +32,11 @@ ifndef CONFIG_MMU
 isa-y			:= $(isa-y)-nommu
 endif
 
+ifndef CONFIG_SH_DSP
 ifndef CONFIG_SH_FPU
 isa-y			:= $(isa-y)-nofpu
 endif
+endif
 
 cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),)
 
@@ -79,24 +83,19 @@ head-y := arch/sh/kernel/head.o arch/sh/kernel/init_task.o
 LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
 
 core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
 # Boards
 machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
-machdir-$(CONFIG_SH_STB1_HARP)			:= harp
-machdir-$(CONFIG_SH_STB1_OVERDRIVE)		:= overdrive
 machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
-machdir-$(CONFIG_SH_CQREEK)			:= cqreek
-machdir-$(CONFIG_SH_DMIDA)			:= dmida
 machdir-$(CONFIG_SH_EC3104)			:= ec3104
 machdir-$(CONFIG_SH_SATURN)			:= saturn
 machdir-$(CONFIG_SH_DREAMCAST)			:= dreamcast
-machdir-$(CONFIG_SH_CAT68701)			:= cat68701
 machdir-$(CONFIG_SH_BIGSUR)			:= bigsur
-machdir-$(CONFIG_SH_SH2000)			:= sh2000
-machdir-$(CONFIG_SH_ADX)			:= adx
 machdir-$(CONFIG_SH_MPC1211)			:= mpc1211
 machdir-$(CONFIG_SH_SH03)			:= sh03
 machdir-$(CONFIG_SH_SECUREEDGE5410)		:= snapgear
@@ -104,16 +103,16 @@ machdir-$(CONFIG_SH_HS7751RVOIP)		:= renesas/hs7751rvoip
 machdir-$(CONFIG_SH_RTS7751R2D)			:= renesas/rts7751r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
+machdir-$(CONFIG_SH_R7780RP)			:= renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW)			:= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
+machdir-$(CONFIG_SH_LANDISK)			:= landisk
+machdir-$(CONFIG_SH_TITAN)			:= titan
+machdir-$(CONFIG_SH_SHMIN)			:= shmin
 machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
 
 incdir-y			:= $(notdir $(machdir-y))
-
-incdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se
-incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se7751
-incdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)        := se7300
-incdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se73180
-incdir-$(CONFIG_SH_HP600)			:= hp6xx
+incdir-$(CONFIG_SH_HP6XX)			:= hp6xx
 
 ifneq ($(machdir-y),)
 core-y				+= arch/sh/boards/$(machdir-y)/
@@ -137,17 +136,14 @@ boot := arch/sh/boot
 
 CPPFLAGS_vmlinux.lds := -traditional
 
-ifneq ($(KBUILD_SRC),)
 incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
 
 #	Update machine arch and proc symlinks if something which affects
 #	them changed.  We use .arch and .mach to indicate when they were
 #	updated last, otherwise make uses the target directory mtime.
 
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/auto.conf
+include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
+		     include/config/auto.conf FORCE
 	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
 	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
 	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
@@ -157,7 +153,8 @@ include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/auto.conf
 #	don't, just reference the parent directory so the semantics are
 #	kept roughly the same.
 
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/auto.conf
+include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
+		      include/config/auto.conf FORCE
 	@echo -n '  SYMLINK include/asm-sh/mach -> '
 	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
 	$(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
@@ -170,7 +167,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/auto.conf
 	fi
 	@touch $@
 
-archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
+archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
 
 PHONY += maketools FORCE
 maketools:  include/linux/version.h FORCE
@@ -191,4 +188,3 @@ CLEAN_FILES += include/asm-sh/machtypes.h
 define archhelp
 	@echo '  zImage 	           - Compressed kernel image (arch/sh/boot/zImage)'
 endef
-
diff --git a/arch/sh/boards/adx/Makefile b/arch/sh/boards/adx/Makefile
deleted file mode 100644
index 5b1c531b399..00000000000
--- a/arch/sh/boards/adx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for ADX boards
-#
-
-obj-y	 := setup.o irq.o irq_maskreq.o
-
diff --git a/arch/sh/boards/adx/irq.c b/arch/sh/boards/adx/irq.c
deleted file mode 100644
index c6ca409dff9..00000000000
--- a/arch/sh/boards/adx/irq.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/sh/boards/adx/irq.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-void init_adx_IRQ(void)
-{
-        int i;
-
-/*      printk("init_adx_IRQ()\n");*/
-        /* setup irq_mask_register */
-        irq_mask_register = (unsigned short *)0xa6000008;
-
-        /* cover all external interrupt area by maskreg_irq_type
-         * (Actually, irq15 doesn't exist)
-         */
-        for (i = 0; i < 16; i++) {
-                make_maskreg_irq(i);
-                disable_irq(i);
-        }
-}
diff --git a/arch/sh/boards/adx/setup.c b/arch/sh/boards/adx/setup.c
deleted file mode 100644
index 4938d959234..00000000000
--- a/arch/sh/boards/adx/setup.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* 
- * linux/arch/sh/board/adx/setup.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/machvec.h>
-#include <linux/module.h>
-
-extern void init_adx_IRQ(void);
-extern void *cf_io_base;
-
-const char *get_system_type(void)
-{
-	return "A&D ADX";
-}
-
-unsigned long adx_isa_port2addr(unsigned long offset)
-{
-	/* CompactFlash (IDE) */
-	if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset == 0x3f6)) {
-		return (unsigned long)cf_io_base + offset;
-	}
-
-	/* eth0 */
-	if ((offset >= 0x300) && (offset <= 0x30f)) {
-		return 0xa5000000 + offset;	/* COMM BOARD (AREA1) */
-	}
-
-	return offset + 0xb0000000; /* IOBUS (AREA 4)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_adx __initmv = {
-	.mv_nr_irqs		= 48,
-	.mv_isa_port2addr	= adx_isa_port2addr,
-	.mv_init_irq		= init_adx_IRQ,
-};
-ALIAS_MV(adx)
-
-int __init platform_setup(void)
-{
-	/* Nothing to see here .. */
-	return 0;
-}
-
diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c
index ac946a2201c..1ab04da3638 100644
--- a/arch/sh/boards/bigsur/irq.c
+++ b/arch/sh/boards/bigsur/irq.c
@@ -19,6 +19,7 @@
  * IRQ functions for a Hitachi Big Sur Evaluation Board.
  *
  */
+#undef DEBUG
 
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -41,10 +42,8 @@
 #undef BIGSUR_DEBUG
 
 #ifdef BIGSUR_DEBUG
-#define DPRINTK(args...)        printk(args)
 #define DIPRINTK(n, args...)    if (BIGSUR_DEBUG>(n)) printk(args)
 #else
-#define DPRINTK(args...)
 #define DIPRINTK(n, args...)
 #endif /* BIGSUR_DEBUG */
 
@@ -60,45 +59,39 @@ extern int hd64465_irq_demux(int irq);
 /* Level 1 IRQ routines */
 static void disable_bigsur_l1irq(unsigned int irq)
 {
-        unsigned long flags;
         unsigned char mask;
         unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
         unsigned char bit =  (1 << ((irq - MGATE_IRQ_LOW)%8) );
 
         if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
-                DPRINTK("Disable L1 IRQ %d\n", irq);
+                pr_debug("Disable L1 IRQ %d\n", irq);
                 DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
                         mask_port, bit);
-                local_irq_save(flags);
 
                 /* Disable IRQ - set mask bit */
                 mask = inb(mask_port) | bit;
                 outb(mask, mask_port);
-                local_irq_restore(flags);
                 return;
         }
-        DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
+        pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
 }
 
 static void enable_bigsur_l1irq(unsigned int irq)
 {
-        unsigned long flags;
         unsigned char mask;
         unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
         unsigned char bit =  (1 << ((irq - MGATE_IRQ_LOW)%8) );
 
         if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
-                DPRINTK("Enable L1 IRQ %d\n", irq);
+                pr_debug("Enable L1 IRQ %d\n", irq);
                 DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
                         mask_port, bit);
-                local_irq_save(flags);
                 /* Enable L1 IRQ - clear mask bit */
                 mask = inb(mask_port) & ~bit;
                 outb(mask, mask_port);
-                local_irq_restore(flags);
                 return;
         }
-        DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
+        pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
 }
 
 
@@ -126,51 +119,45 @@ static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1;
 /* Level 2 IRQ routines */
 static void disable_bigsur_l2irq(unsigned int irq)
 {
-        unsigned long flags;
         unsigned char mask;
         unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
         unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
 
-    if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
-                DPRINTK("Disable L2 IRQ %d\n", irq);
+	if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
+                pr_debug("Disable L2 IRQ %d\n", irq);
                 DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
                         mask_port, bit);
-                local_irq_save(flags);
 
                 /* Disable L2 IRQ - set mask bit */
                 mask = inb(mask_port) | bit;
                 outb(mask, mask_port);
-                local_irq_restore(flags);
                 return;
         }
-        DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
+        pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
 }
 
 static void enable_bigsur_l2irq(unsigned int irq)
 {
-        unsigned long flags;
         unsigned char mask;
         unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
         unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
 
-    if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
-                DPRINTK("Enable L2 IRQ %d\n", irq);
+	if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
+                pr_debug("Enable L2 IRQ %d\n", irq);
                 DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
                         mask_port, bit);
-                local_irq_save(flags);
 
                 /* Enable L2 IRQ - clear mask bit */
                 mask = inb(mask_port) & ~bit;
                 outb(mask, mask_port);
-                local_irq_restore(flags);
                 return;
         }
-        DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
+        pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
 }
 
 static void mask_and_ack_bigsur(unsigned int irq)
 {
-        DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq);
+        pr_debug("mask_and_ack_bigsur IRQ %d\n", irq);
         if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
                 disable_bigsur_l1irq(irq);
         else
@@ -179,7 +166,7 @@ static void mask_and_ack_bigsur(unsigned int irq)
 
 static void end_bigsur_irq(unsigned int irq)
 {
-        DPRINTK("end_bigsur_irq IRQ %d\n", irq);
+        pr_debug("end_bigsur_irq IRQ %d\n", irq);
         if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
                 if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
                         enable_bigsur_l1irq(irq);
@@ -193,7 +180,7 @@ static unsigned int startup_bigsur_irq(unsigned int irq)
         u8 mask;
         u32 reg;
 
-        DPRINTK("startup_bigsur_irq IRQ %d\n", irq);
+        pr_debug("startup_bigsur_irq IRQ %d\n", irq);
 
         if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
                 /* Enable the L1 IRQ */
@@ -218,7 +205,7 @@ static unsigned int startup_bigsur_irq(unsigned int irq)
 
 static void shutdown_bigsur_irq(unsigned int irq)
 {
-        DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq);
+        pr_debug("shutdown_bigsur_irq IRQ %d\n", irq);
         if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
                 disable_bigsur_l1irq(irq);
         else
@@ -260,7 +247,7 @@ static void make_bigsur_l1isr(unsigned int irq) {
                 disable_bigsur_l1irq(irq);
                 return;
         }
-        DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq);
+        pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq);
         return;
 }
 
@@ -277,7 +264,7 @@ static void make_bigsur_l2isr(unsigned int irq) {
                 disable_bigsur_l2irq(irq);
                 return;
         }
-        DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq);
+        pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq);
         return;
 }
 
diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c
index dfeede9da50..9711c20fc9e 100644
--- a/arch/sh/boards/bigsur/setup.c
+++ b/arch/sh/boards/bigsur/setup.c
@@ -41,31 +41,7 @@
 //		Big Sur Init Routines	
 /*===========================================================*/
 
-const char *get_system_type(void)
-{
-	return "Big Sur";
-}
-
-/*
- * The Machine Vector
- */
-extern void heartbeat_bigsur(void);
-extern void init_bigsur_IRQ(void);
-
-struct sh_machine_vector mv_bigsur __initmv = {
-	.mv_nr_irqs		= NR_IRQS,     // Defined in <asm/irq.h>
-
-	.mv_isa_port2addr	= bigsur_isa_port2addr,
-	.mv_irq_demux       	= bigsur_irq_demux,
-
-	.mv_init_irq		= init_bigsur_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_bigsur,
-#endif
-};
-ALIAS_MV(bigsur)
-
-int __init platform_setup(void)
+static void __init bigsur_setup(char **cmdline_p)
 {
 	/* Mask all 2nd level IRQ's */
 	outb(-1,BIGSUR_IMR0);
@@ -89,7 +65,24 @@ int __init platform_setup(void)
 	outw(1, BIGSUR_ETHR+0xe);
 	/* set the IO port to BIGSUR_ETHER_IOPORT */
 	outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
-
-	return 0;
 }
 
+/*
+ * The Machine Vector
+ */
+extern void heartbeat_bigsur(void);
+extern void init_bigsur_IRQ(void);
+
+struct sh_machine_vector mv_bigsur __initmv = {
+	.mv_name		= "Big Sur",
+	.mv_setup		= bigsur_setup,
+
+	.mv_isa_port2addr	= bigsur_isa_port2addr,
+	.mv_irq_demux       	= bigsur_irq_demux,
+
+	.mv_init_irq		= init_bigsur_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_bigsur,
+#endif
+};
+ALIAS_MV(bigsur)
diff --git a/arch/sh/boards/cat68701/Makefile b/arch/sh/boards/cat68701/Makefile
deleted file mode 100644
index 52c1de0a6df..00000000000
--- a/arch/sh/boards/cat68701/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CAT-68701 specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o
-
diff --git a/arch/sh/boards/cat68701/irq.c b/arch/sh/boards/cat68701/irq.c
deleted file mode 100644
index f9a6d185fb8..00000000000
--- a/arch/sh/boards/cat68701/irq.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/arch/sh/boards/cat68701/irq.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *               2001  Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-int cat68701_irq_demux(int irq)
-{
-        if(irq==13) return 14;
-        if(irq==7)  return 10;
-        return irq;
-}
-
-void init_cat68701_IRQ()
-{
-        make_imask_irq(10);
-        make_imask_irq(14);
-}
diff --git a/arch/sh/boards/cat68701/setup.c b/arch/sh/boards/cat68701/setup.c
deleted file mode 100644
index 90e5175df22..00000000000
--- a/arch/sh/boards/cat68701/setup.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* 
- * linux/arch/sh/boards/cat68701/setup.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *               2001  Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-const char *get_system_type(void)
-{
-	return "CAT-68701";
-}
-
-#ifdef CONFIG_HEARTBEAT
-void heartbeat_cat68701()
-{
-        static unsigned int cnt = 0, period = 0 , bit = 0;
-        cnt += 1;
-        if (cnt < period) {
-                return;
-        }
-        cnt = 0;
-
-        /* Go through the points (roughly!):
-         * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-         */
-        period = 110 - ( (300<<FSHIFT)/
-                         ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if(bit){ bit=0; }else{ bit=1; }
-	outw(bit<<15,0x3fe);
-}
-#endif /* CONFIG_HEARTBEAT */
-
-unsigned long cat68701_isa_port2addr(unsigned long offset)
-{
-	/* CompactFlash (IDE) */
-	if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset==0x3f6))
-		return 0xba000000 + offset;
-
-	/* INPUT PORT */
-	if ((offset >= 0x3fc) && (offset <= 0x3fd))
-		return 0xb4007000 + offset;
-
-	/* OUTPUT PORT */
-	if ((offset >= 0x3fe) && (offset <= 0x3ff))
-		return 0xb4007400 + offset;
-
-	return offset + 0xb4000000; /* other I/O (EREA 5)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_cat68701 __initmv = {
-	.mv_nr_irqs		= 32,
-	.mv_isa_port2addr	= cat68701_isa_port2addr,
-	.mv_irq_demux		= cat68701_irq_demux,
-
-	.mv_init_irq		= init_cat68701_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_cat68701,
-#endif
-};
-ALIAS_MV(cat68701)
-
-int __init platform_setup(void)
-{
-	/* dummy read erea5 (CS8900A) */
-}
-
diff --git a/arch/sh/boards/cqreek/Makefile b/arch/sh/boards/cqreek/Makefile
deleted file mode 100644
index 1a788a85eba..00000000000
--- a/arch/sh/boards/cqreek/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CqREEK specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o
-
diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c
deleted file mode 100644
index 2955adc5231..00000000000
--- a/arch/sh/boards/cqreek/irq.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* $Id: irq.c,v 1.1.2.4 2002/11/04 20:33:56 lethal Exp $
- *
- * arch/sh/boards/cqreek/irq.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/cqreek/cqreek.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/rtc.h>
-
-struct cqreek_irq_data {
-	unsigned short mask_port;	/* Port of Interrupt Mask Register */
-	unsigned short stat_port;	/* Port of Interrupt Status Register */
-	unsigned short bit;		/* Value of the bit */
-};
-static struct cqreek_irq_data cqreek_irq_data[NR_IRQS];
-
-static void disable_cqreek_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned short mask;
-	unsigned short mask_port = cqreek_irq_data[irq].mask_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	local_irq_save(flags);
-	/* Disable IRQ */
-	mask = inw(mask_port) & ~bit;
-	outw_p(mask, mask_port);
-	local_irq_restore(flags);
-}
-
-static void enable_cqreek_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned short mask;
-	unsigned short mask_port = cqreek_irq_data[irq].mask_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	local_irq_save(flags);
-	/* Enable IRQ */
-	mask = inw(mask_port) | bit;
-	outw_p(mask, mask_port);
-	local_irq_restore(flags);
-}
-
-static void mask_and_ack_cqreek(unsigned int irq)
-{
-	unsigned short stat_port = cqreek_irq_data[irq].stat_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	disable_cqreek_irq(irq);
-	/* Clear IRQ (it might be edge IRQ) */
-	inw(stat_port);
-	outw_p(bit, stat_port);
-}
-
-static void end_cqreek_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cqreek_irq(irq);
-}
-
-static unsigned int startup_cqreek_irq(unsigned int irq)
-{ 
-	enable_cqreek_irq(irq);
-	return 0;
-}
-
-static void shutdown_cqreek_irq(unsigned int irq)
-{
-	disable_cqreek_irq(irq);
-}
-
-static struct hw_interrupt_type cqreek_irq_type = {
-	.typename = "CqREEK-IRQ",
-	.startup = startup_cqreek_irq,
-	.shutdown = shutdown_cqreek_irq,
-	.enable = enable_cqreek_irq,
-	.disable = disable_cqreek_irq,
-	.ack = mask_and_ack_cqreek,
-	.end = end_cqreek_irq
-};
-
-int cqreek_has_ide, cqreek_has_isa;
-
-/* XXX: This is just for test for my NE2000 ISA board
-   What we really need is virtualized IRQ and demultiplexer like HP600 port */
-void __init init_cqreek_IRQ(void)
-{
-	if (cqreek_has_ide) {
-		cqreek_irq_data[14].mask_port = BRIDGE_IDE_INTR_MASK;
-		cqreek_irq_data[14].stat_port = BRIDGE_IDE_INTR_STAT;
-		cqreek_irq_data[14].bit = 1;
-
-		irq_desc[14].chip = &cqreek_irq_type;
-		irq_desc[14].status = IRQ_DISABLED;
-		irq_desc[14].action = 0;
-		irq_desc[14].depth = 1;
-
-		disable_cqreek_irq(14);
-	}
-
-	if (cqreek_has_isa) {
-		cqreek_irq_data[10].mask_port = BRIDGE_ISA_INTR_MASK;
-		cqreek_irq_data[10].stat_port = BRIDGE_ISA_INTR_STAT;
-		cqreek_irq_data[10].bit = (1 << 10);
-
-		/* XXX: Err... we may need demultiplexer for ISA irq... */
-		irq_desc[10].chip = &cqreek_irq_type;
-		irq_desc[10].status = IRQ_DISABLED;
-		irq_desc[10].action = 0;
-		irq_desc[10].depth = 1;
-
-		disable_cqreek_irq(10);
-	}
-}
-
diff --git a/arch/sh/boards/cqreek/setup.c b/arch/sh/boards/cqreek/setup.c
deleted file mode 100644
index eff4ed93599..00000000000
--- a/arch/sh/boards/cqreek/setup.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* $Id: setup.c,v 1.5 2003/08/04 01:51:58 lethal Exp $
- *
- * arch/sh/kernel/setup_cqreek.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach/cqreek.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-
-#define IDE_OFFSET 0xA4000000UL
-#define ISA_OFFSET 0xA4A00000UL
-
-const char *get_system_type(void)
-{
-	return "CqREEK";
-}
-
-static unsigned long cqreek_port2addr(unsigned long port)
-{
-	if (0x0000<=port && port<=0x0040)
-		return IDE_OFFSET + port;
-	if ((0x01f0<=port && port<=0x01f7) || port == 0x03f6)
-		return IDE_OFFSET + port;
-
-	return ISA_OFFSET + port;
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_cqreek __initmv = {
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#endif
-
-	.mv_init_irq		= init_cqreek_IRQ,
-
-	.mv_isa_port2addr	= cqreek_port2addr,
-};
-ALIAS_MV(cqreek)
-
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
-	int i;
-/* udelay is not available at setup time yet... */
-#define DELAY() do {for (i=0; i<10000; i++) ctrl_inw(0xa0000000);} while(0)
-
-	if ((inw (BRIDGE_FEATURE) & 1)) { /* We have IDE interface */
-		outw_p(0, BRIDGE_IDE_INTR_LVL);
-		outw_p(0, BRIDGE_IDE_INTR_MASK);
-
-		outw_p(0, BRIDGE_IDE_CTRL);
-		DELAY();
-
-		outw_p(0x8000, BRIDGE_IDE_CTRL);
-		DELAY();
-
-		outw_p(0xffff, BRIDGE_IDE_INTR_STAT); /* Clear interrupt status */
-		outw_p(0x0f-14, BRIDGE_IDE_INTR_LVL); /* Use 14 IPR */
-		outw_p(1, BRIDGE_IDE_INTR_MASK); /* Enable interrupt */
-		cqreek_has_ide=1;
-	}
-
-	if ((inw (BRIDGE_FEATURE) & 2)) { /* We have ISA interface */
-		outw_p(0, BRIDGE_ISA_INTR_LVL);
-		outw_p(0, BRIDGE_ISA_INTR_MASK);
-
-		outw_p(0, BRIDGE_ISA_CTRL);
-		DELAY();
-		outw_p(0x8000, BRIDGE_ISA_CTRL);
-		DELAY();
-
-		outw_p(0xffff, BRIDGE_ISA_INTR_STAT); /* Clear interrupt status */
-		outw_p(0x0f-10, BRIDGE_ISA_INTR_LVL); /* Use 10 IPR */
-		outw_p(0xfff8, BRIDGE_ISA_INTR_MASK); /* Enable interrupt */
-		cqreek_has_isa=1;
-	}
-
-	printk(KERN_INFO "CqREEK Setup (IDE=%d, ISA=%d)...done\n", cqreek_has_ide, cqreek_has_isa);
-}
-
diff --git a/arch/sh/boards/dmida/Makefile b/arch/sh/boards/dmida/Makefile
deleted file mode 100644
index 75999aa0a2d..00000000000
--- a/arch/sh/boards/dmida/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts
-# of the kernel
-#
-
-obj-y	 := mach.o
-
diff --git a/arch/sh/boards/dmida/mach.c b/arch/sh/boards/dmida/mach.c
deleted file mode 100644
index d03a25f989c..00000000000
--- a/arch/sh/boards/dmida/mach.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/arch/sh/boards/dmida/mach.c
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * Derived from mach_hp600.c, which bore the message:
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the DataMyte Industrial Digital Assistant(tm).
- * See http://www.dmida.com
- *
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/irq.h>
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_dmida __initmv = {
-	.mv_nr_irqs		= HD64465_IRQ_BASE+HD64465_IRQ_NUM,
-
-	.mv_inb			= hd64465_inb,
-	.mv_inw			= hd64465_inw,
-	.mv_inl			= hd64465_inl,
-	.mv_outb		= hd64465_outb,
-	.mv_outw		= hd64465_outw,
-	.mv_outl		= hd64465_outl,
-
-	.mv_inb_p		= hd64465_inb_p,
-	.mv_inw_p		= hd64465_inw,
-	.mv_inl_p		= hd64465_inl,
-	.mv_outb_p		= hd64465_outb_p,
-	.mv_outw_p		= hd64465_outw,
-	.mv_outl_p		= hd64465_outl,
-
-	.mv_insb		= hd64465_insb,
-	.mv_insw		= hd64465_insw,
-	.mv_insl		= hd64465_insl,
-	.mv_outsb		= hd64465_outsb,
-	.mv_outsw		= hd64465_outsw,
-	.mv_outsl		= hd64465_outsl,
-
-	.mv_irq_demux		= hd64465_irq_demux,
-};
-ALIAS_MV(dmida)
-
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
index b10a6b11c03..5bf01f86c20 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/dreamcast/irq.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/irq.h>
-
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dreamcast/sysasic.h>
@@ -26,10 +25,10 @@
    event.
 
    There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dc_sysasic.h.  There are three groups
-   of EMRs that parallel the ESRs.  Each EMR group corresponds to an IRQ, so
-   0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 triggers
-   IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
+   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
 
    In the kernel, these events are mapped to virtual IRQs so that drivers can
    respond to them as they would a normal interrupt.  In order to keep this
@@ -57,29 +56,23 @@
 /* Disable the hardware event by masking its bit in its EMR */
 static inline void disable_systemasic_irq(unsigned int irq)
 {
-        unsigned long flags;
         __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
         __u32 mask;
 
-        local_irq_save(flags);
         mask = inl(emr);
         mask &= ~(1 << EVENT_BIT(irq));
         outl(mask, emr);
-        local_irq_restore(flags);
 }
 
 /* Enable the hardware event by setting its bit in its EMR */
 static inline void enable_systemasic_irq(unsigned int irq)
 {
-        unsigned long flags;
         __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
         __u32 mask;
 
-        local_irq_save(flags);
         mask = inl(emr);
         mask |= (1 << EVENT_BIT(irq));
         outl(mask, emr);
-        local_irq_restore(flags);
 }
 
 /* Acknowledge a hardware event by writing its bit back to its ESR */
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
index 379de162913..b3a876a3b85 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/dreamcast/rtc.c
@@ -1,4 +1,5 @@
-/* arch/sh/kernel/rtc-aica.c
+/*
+ * arch/sh/boards/dreamcast/rtc.c
  *
  * Dreamcast AICA RTC routines.
  *
@@ -10,15 +11,12 @@
  */
 
 #include <linux/time.h>
-
+#include <asm/rtc.h>
 #include <asm/io.h>
 
-extern void (*rtc_get_time)(struct timespec *);
-extern int (*rtc_set_time)(const time_t);
-
 /* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
-   seconds to get the standard Unix Epoch when getting the time, and add 20
-   years when setting the time. */
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
 #define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
 
 /* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
@@ -32,7 +30,8 @@ extern int (*rtc_set_time)(const time_t);
  *
  * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
  */
-void aica_rtc_gettimeofday(struct timespec *ts) {
+void aica_rtc_gettimeofday(struct timespec *ts)
+{
 	unsigned long val1, val2;
 
 	do {
@@ -55,7 +54,8 @@ void aica_rtc_gettimeofday(struct timespec *ts) {
  *
  * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
  */
-int aica_rtc_settimeofday(const time_t secs) {
+int aica_rtc_settimeofday(const time_t secs)
+{
 	unsigned long val1, val2;
 	unsigned long adj = secs + TWENTY_YEARS;
 
@@ -75,7 +75,7 @@ int aica_rtc_settimeofday(const time_t secs) {
 
 void aica_time_init(void)
 {
-	rtc_get_time = aica_rtc_gettimeofday;
-	rtc_set_time = aica_rtc_settimeofday;
+	rtc_sh_get_time = aica_rtc_gettimeofday;
+	rtc_sh_set_time = aica_rtc_settimeofday;
 }
 
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
index 0027b80a234..f13017eeeb2 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/dreamcast/setup.c
@@ -22,41 +22,21 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/device.h>
-
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/rtc.h>
 #include <asm/machvec.h>
-#include <asm/machvec_init.h>
 #include <asm/mach/sysasic.h>
 
 extern struct hw_interrupt_type systemasic_int;
-/* XXX: Move this into it's proper header. */
-extern void (*board_time_init)(void);
 extern void aica_time_init(void);
 extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
 
-void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
 int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t);
 
-const char *get_system_type(void)
-{
-	return "Sega Dreamcast";
-}
-
-struct sh_machine_vector mv_dreamcast __initmv = {
-	.mv_nr_irqs		= NR_IRQS,
-
-	.mv_irq_demux		= systemasic_irq_demux,
-
-#ifdef CONFIG_PCI
-	.mv_consistent_alloc	= dreamcast_consistent_alloc,
-	.mv_consistent_free	= dreamcast_consistent_free,
-#endif
-};
-ALIAS_MV(dreamcast)
-
-int __init platform_setup(void)
+static void __init dreamcast_setup(char **cmdline_p)
 {
 	int i;
 
@@ -78,6 +58,16 @@ int __init platform_setup(void)
 	if (gapspci_init() < 0)
 		printk(KERN_WARNING "GAPSPCI was not detected.\n");
 #endif
-
-	return 0;
 }
+
+struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+
+#ifdef CONFIG_PCI
+	.mv_consistent_alloc	= dreamcast_consistent_alloc,
+	.mv_consistent_free	= dreamcast_consistent_free,
+#endif
+};
+ALIAS_MV(dreamcast)
diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c
index 4b3ef16a0e9..902bc975a13 100644
--- a/arch/sh/boards/ec3104/setup.c
+++ b/arch/sh/boards/ec3104/setup.c
@@ -21,22 +21,36 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/machvec.h>
 #include <asm/mach/ec3104.h>
 
-const char *get_system_type(void)
+static void __init ec3104_setup(char **cmdline_p)
 {
-	return "EC3104";
+	char str[8];
+	int i;
+
+	for (i=0; i<8; i++)
+		str[i] = ctrl_readb(EC3104_BASE + i);
+
+	for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
+		irq_desc[i].handler = &ec3104_int;
+
+	printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
+	       str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
+
+	/* mask all interrupts.  this should have been done by the boot
+	 * loader for us but we want to be sure ... */
+	ctrl_writel(0xffffffff, EC3104_IMR);
 }
 
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_ec3104 __initmv = {
+	.mv_name	= "EC3104",
+	.mv_setup	= ec3104_setup,
 	.mv_nr_irqs	= 96,
 
 	.mv_inb		= ec3104_inb,
@@ -48,31 +62,4 @@ struct sh_machine_vector mv_ec3104 __initmv = {
 
 	.mv_irq_demux	= ec3104_irq_demux,
 };
-
 ALIAS_MV(ec3104)
-
-int __init platform_setup(void)
-{
-	char str[8];
-	int i;
-	
-	if (0)
-		return 0;
-
-	for (i=0; i<8; i++)
-		str[i] = ctrl_readb(EC3104_BASE + i);
-
-	for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
-		irq_desc[i].chip = &ec3104_int;
-
-	printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
-	       str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
-
-	/* mask all interrupts.  this should have been done by the boot
-	 * loader for us but we want to be sure ... */
-	ctrl_writel(0xffffffff, EC3104_IMR);
-	
-	return 0;
-}
-
diff --git a/arch/sh/boards/harp/Makefile b/arch/sh/boards/harp/Makefile
deleted file mode 100644
index eb753d31812..00000000000
--- a/arch/sh/boards/harp/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for STMicroelectronics board specific parts of the kernel
-#
-
-obj-y := irq.o setup.o mach.o led.o
-
-obj-$(CONFIG_PCI) += pcidma.o
-
diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c
deleted file mode 100644
index 96bb41c9fc5..00000000000
--- a/arch/sh/boards/harp/irq.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Looks after interrupts on the HARP board.
- *
- * Bases on the IPR irq system
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-
-#define NUM_EXTERNAL_IRQS 16
-
-// Early versions of the STB1 Overdrive required this nasty frig
-//#define INVERT_INTMASK_WRITES
-
-static void enable_harp_irq(unsigned int irq);
-static void disable_harp_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_harp_irq disable_harp_irq
-
-static void mask_and_ack_harp(unsigned int);
-static void end_harp_irq(unsigned int irq);
-
-static unsigned int startup_harp_irq(unsigned int irq)
-{
-	enable_harp_irq(irq);
-	return 0;		/* never anything pending */
-}
-
-static struct hw_interrupt_type harp_irq_type = {
-	.typename = "Harp-IRQ",
-	.startup = startup_harp_irq,
-	.shutdown = shutdown_harp_irq,
-	.enable = enable_harp_irq,
-	.disable = disable_harp_irq,
-	.ack = mask_and_ack_harp,
-	.end = end_harp_irq
-};
-
-static void disable_harp_irq(unsigned int irq)
-{
-	unsigned val, flags;
-	unsigned maskReg;
-	unsigned mask;
-	int pri;
-
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-	pri = 15 - irq;
-
-	if (pri < 8) {
-		maskReg = EPLD_INTMASK0;
-	} else {
-		maskReg = EPLD_INTMASK1;
-		pri -= 8;
-	}
-
-	local_irq_save(flags);
-	mask = ctrl_inl(maskReg);
-	mask &= (~(1 << pri));
-#if defined(INVERT_INTMASK_WRITES)
-	mask ^= 0xff;
-#endif
-	ctrl_outl(mask, maskReg);
-	local_irq_restore(flags);
-}
-
-static void enable_harp_irq(unsigned int irq)
-{
-	unsigned flags;
-	unsigned maskReg;
-	unsigned mask;
-	int pri;
-
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-	pri = 15 - irq;
-
-	if (pri < 8) {
-		maskReg = EPLD_INTMASK0;
-	} else {
-		maskReg = EPLD_INTMASK1;
-		pri -= 8;
-	}
-
-	local_irq_save(flags);
-	mask = ctrl_inl(maskReg);
-
-
-	mask |= (1 << pri);
-
-#if defined(INVERT_INTMASK_WRITES)
-	mask ^= 0xff;
-#endif
-	ctrl_outl(mask, maskReg);
-
-	local_irq_restore(flags);
-}
-
-/* This functions sets the desired irq handler to be an overdrive type */
-static void __init make_harp_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &harp_irq_type;
-	disable_harp_irq(irq);
-}
-
-static void mask_and_ack_harp(unsigned int irq)
-{
-	disable_harp_irq(irq);
-}
-
-static void end_harp_irq(unsigned int irq)
-{
-	enable_harp_irq(irq);
-}
-
-void __init init_harp_irq(void)
-{
-	int i;
-
-#if !defined(INVERT_INTMASK_WRITES)
-	// On the harp these are set to enable an interrupt
-	ctrl_outl(0x00, EPLD_INTMASK0);
-	ctrl_outl(0x00, EPLD_INTMASK1);
-#else
-	// On the Overdrive the data is inverted before being stored in the reg
-	ctrl_outl(0xff, EPLD_INTMASK0);
-	ctrl_outl(0xff, EPLD_INTMASK1);
-#endif
-
-	for (i = 0; i < NUM_EXTERNAL_IRQS; i++) {
-		make_harp_irq(i);
-	}
-}
diff --git a/arch/sh/boards/harp/led.c b/arch/sh/boards/harp/led.c
deleted file mode 100644
index aeb7b392b19..00000000000
--- a/arch/sh/boards/harp/led.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/arch/sh/stboards/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains ST40STB1 HARP and compatible code.
- */
-
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-/* Harp: Flash LD10 (front pannel) connected to EPLD (IC8) */
-/* Overdrive: Flash LD1 (front panel) connected to EPLD (IC4) */
-/* Works for HARP and overdrive */
-static void mach_led(int position, int value)
-{
-	if (value) {
-		ctrl_outl(EPLD_LED_ON, EPLD_LED);
-	} else {
-		ctrl_outl(EPLD_LED_OFF, EPLD_LED);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat_harp(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led( -1, 1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led( -1, 0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-}
-#endif
diff --git a/arch/sh/boards/harp/mach.c b/arch/sh/boards/harp/mach.c
deleted file mode 100644
index a946dd1674c..00000000000
--- a/arch/sh/boards/harp/mach.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/sh/boards/harp/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the STMicroelectronics STB1 HARP and compatible boards
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-#include <asm/hd64465/io.h>
-#include <asm/hd64465/hd64465.h>
-
-void setup_harp(void);
-void init_harp_irq(void);
-void heartbeat_harp(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_harp __initmv = {
-	.mv_nr_irqs		= 89 + HD64465_IRQ_NUM,
-
-	.mv_inb			= hd64465_inb,
-	.mv_inw			= hd64465_inw,
-	.mv_inl			= hd64465_inl,
-	.mv_outb		= hd64465_outb,
-	.mv_outw		= hd64465_outw,
-	.mv_outl		= hd64465_outl,
-
-	.mv_inb_p		= hd64465_inb_p,
-	.mv_inw_p		= hd64465_inw,
-	.mv_inl_p		= hd64465_inl,
-	.mv_outb_p		= hd64465_outb_p,
-	.mv_outw_p		= hd64465_outw,
-	.mv_outl_p		= hd64465_outl,
-
-	.mv_insb		= hd64465_insb,
-	.mv_insw		= hd64465_insw,
-	.mv_insl		= hd64465_insl,
-	.mv_outsb		= hd64465_outsb,
-	.mv_outsw		= hd64465_outsw,
-	.mv_outsl		= hd64465_outsl,
-
-        .mv_isa_port2addr       = hd64465_isa_port2addr,
-
-#ifdef CONFIG_PCI
-	.mv_init_irq		= init_harp_irq,
-#endif
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_harp,
-#endif
-};
-
-ALIAS_MV(harp)
diff --git a/arch/sh/boards/harp/pcidma.c b/arch/sh/boards/harp/pcidma.c
deleted file mode 100644
index 475311390fd..00000000000
--- a/arch/sh/boards/harp/pcidma.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* 
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Dynamic DMA mapping support.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-
-void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-			   dma_addr_t * dma_handle)
-{
-	void *ret;
-	int gfp = GFP_ATOMIC;
-
-	ret = (void *) __get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-	        /* Is it neccessary to do the memset? */
-		memset(ret, 0, size);
-		*dma_handle = virt_to_bus(ret);
-	}
-	/* We must flush the cache before we pass it on to the device */
-	flush_cache_all();
-	return  P2SEGADDR(ret);
-}
-
-void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
-{
-        unsigned long p1addr=P1SEGADDR((unsigned long)vaddr);
-
-	free_pages(p1addr, get_order(size));
-}
diff --git a/arch/sh/boards/harp/setup.c b/arch/sh/boards/harp/setup.c
deleted file mode 100644
index 886e450ab63..00000000000
--- a/arch/sh/boards/harp/setup.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/sh/stboard/setup.c
- *
- * Copyright (C) 2001 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * STMicroelectronics ST40STB1 HARP and compatible support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-const char *get_system_type(void)
-{
-	return "STB1 Harp";
-}
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
-#ifdef CONFIG_SH_STB1_HARP
-	unsigned long ic8_version, ic36_version;
-
-	ic8_version = ctrl_inl(EPLD_REVID2);
-	ic36_version = ctrl_inl(EPLD_REVID1);
-
-        printk("STMicroelectronics STB1 HARP initialisaton\n");
-        printk("EPLD versions: IC8: %d.%02d, IC36: %d.%02d\n",
-               (ic8_version >> 4) & 0xf, ic8_version & 0xf,
-               (ic36_version >> 4) & 0xf, ic36_version & 0xf);
-#elif defined(CONFIG_SH_STB1_OVERDRIVE)
-	unsigned long version;
-
-	version = ctrl_inl(EPLD_REVID);
-
-        printk("STMicroelectronics STB1 Overdrive initialisaton\n");
-        printk("EPLD version: %d.%02d\n",
-	       (version >> 4) & 0xf, version & 0xf);
-#else
-#error Undefined machine
-#endif
- 
-        /* Currently all STB1 chips have problems with the sleep instruction,
-         * so disable it here.
-         */
-	disable_hlt();
-
-	return 0;
-}
-
-/*
- * pcibios_map_platform_irq
- *
- * This is board specific and returns the IRQ for a given PCI device.
- * It is used by the PCI code (arch/sh/kernel/st40_pci*)
- *
- */
-
-#define HARP_PCI_IRQ    1
-#define HARP_BRIDGE_IRQ 2
-#define OVERDRIVE_SLOT0_IRQ 0
-
-
-int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch (slot) {
-#ifdef CONFIG_SH_STB1_HARP
-	case 2:		/*This is the PCI slot on the */
-		return HARP_PCI_IRQ;
-	case 1:		/* this is the bridge */
-		return HARP_BRIDGE_IRQ;
-#elif defined(CONFIG_SH_STB1_OVERDRIVE)
-	case 1:
-	case 2:
-	case 3:
-		return slot - 1;
-#else
-#error Unknown board
-#endif
-	default:
-		return -1;
-	}
-}
-
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile
index 927fe0aa5df..ff1b7f5b4e9 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/hp6xx/Makefile
@@ -2,5 +2,6 @@
 # Makefile for the HP6xx specific parts of the kernel
 #
 
-obj-y	 := mach.o setup.o
-
+obj-y	 		:= setup.o
+obj-$(CONFIG_PM)	+= pm.o pm_wakeup.o
+obj-$(CONFIG_APM)	+= hp6xx_apm.o
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c
new file mode 100644
index 00000000000..ad0e712c29f
--- /dev/null
+++ b/arch/sh/boards/hp6xx/hp6xx_apm.c
@@ -0,0 +1,123 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/apm_bios.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/apm.h>
+#include <asm/adc.h>
+#include <asm/hp6xx/hp6xx.h>
+
+#define SH7709_PGDR			0xa400012c
+
+#define APM_CRITICAL			10
+#define APM_LOW				30
+
+#define HP680_BATTERY_MAX		875
+#define HP680_BATTERY_MIN		600
+#define HP680_BATTERY_AC_ON		900
+
+#define MODNAME "hp6x0_apm"
+
+static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+	u8 pgdr;
+	char *p;
+	int battery_status;
+	int battery_flag;
+	int ac_line_status;
+	int time_units = APM_BATTERY_LIFE_UNKNOWN;
+
+	int battery = adc_single(ADC_CHANNEL_BATTERY);
+	int backup = adc_single(ADC_CHANNEL_BACKUP);
+	int charging = adc_single(ADC_CHANNEL_CHARGE);
+	int percentage;
+
+	percentage = 100 * (battery - HP680_BATTERY_MIN) /
+			   (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+
+	ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
+			 APM_AC_ONLINE : APM_AC_OFFLINE;
+
+	p = buf;
+
+	pgdr = ctrl_inb(SH7709_PGDR);
+	if (pgdr & PGDR_MAIN_BATTERY_OUT) {
+		battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+		battery_flag = 0x80;
+		percentage = -1;
+	} else if (charging < 8 ) {
+		battery_status = APM_BATTERY_STATUS_CHARGING;
+		battery_flag = 0x08;
+		ac_line_status = 0xff;
+	} else if (percentage <= APM_CRITICAL) {
+		battery_status = APM_BATTERY_STATUS_CRITICAL;
+		battery_flag = 0x04;
+	} else if (percentage <= APM_LOW) {
+		battery_status = APM_BATTERY_STATUS_LOW;
+		battery_flag = 0x02;
+	} else {
+		battery_status = APM_BATTERY_STATUS_HIGH;
+		battery_flag = 0x01;
+	}
+
+	p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+		     APM_32_BIT_SUPPORT,
+		     ac_line_status,
+		     battery_status,
+		     battery_flag,
+		     percentage,
+		     time_units,
+		     "min");
+	p += sprintf(p, "bat=%d backup=%d charge=%d\n",
+		     battery, backup, charging);
+
+	return p - buf;
+}
+
+static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+	if (!apm_suspended)
+		apm_queue_event(APM_USER_SUSPEND);
+
+	return IRQ_HANDLED;
+}
+
+static int __init hp6x0_apm_init(void)
+{
+	int ret;
+
+	ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
+			  SA_INTERRUPT, MODNAME, 0);
+	if (unlikely(ret < 0)) {
+		printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
+		       HP680_BTN_IRQ);
+		return ret;
+	}
+
+	apm_get_info = hp6x0_apm_get_info;
+
+	return ret;
+}
+
+static void __exit hp6x0_apm_exit(void)
+{
+	free_irq(HP680_BTN_IRQ, 0);
+	apm_get_info = 0;
+}
+
+module_init(hp6x0_apm_init);
+module_exit(hp6x0_apm_exit);
+
+MODULE_AUTHOR("Adriy Skulysh");
+MODULE_DESCRIPTION("hp6xx Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
new file mode 100644
index 00000000000..0e501bcbd7a
--- /dev/null
+++ b/arch/sh/boards/hp6xx/pm.c
@@ -0,0 +1,88 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx/hp6xx.h>
+#include <asm/cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+	u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+	u8 scr;
+	u16 hd64461_stbcr;
+#endif
+
+	if (state != PM_SUSPEND_MEM)
+		return -EINVAL;
+
+#ifdef CONFIG_HD64461_ENABLER
+	outb(0, HD64461_PCC1CSCIER);
+
+	scr = inb(HD64461_PCC1SCR);
+	scr |= HD64461_PCCSCR_VCC1;
+	outb(scr, HD64461_PCC1SCR);
+
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+	ctrl_outb(0x1f, DACR);
+
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(0x01, STBCR);
+
+	stbcr2 = ctrl_inb(STBCR2);
+	ctrl_outb(0x7f , STBCR2);
+
+	outw(0xf07f, HD64461_SCPUCR);
+
+	pm_enter();
+
+	outw(0, HD64461_SCPUCR);
+	ctrl_outb(stbcr, STBCR);
+	ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+
+	outb(0x4c, HD64461_PCC1CSCIER);
+	outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops hp6x0_pm_ops = {
+	.pm_disk_mode	= PM_DISK_FIRMWARE,
+	.enter		= hp6x0_pm_enter,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+	pm_set_ops(&hp6x0_pm_ops);
+	return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S
new file mode 100644
index 00000000000..45e9bf0b911
--- /dev/null
+++ b/arch/sh/boards/hp6xx/pm_wakeup.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/cpu/mmu_context.h>
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ *	k2	scratch (Exception code)
+ *	k3	scratch (Return address)
+ *	k4	scratch
+ *	k5	reserved
+ *	k6	Global Interrupt Mask (0--15 << 4)
+ *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+	mov	#-126, k2
+   	and	#127, k0
+	mov.b	k0, @k2
+! enable refresh
+	mov.l	5f, k1
+	mov.w	6f, k0
+  	mov.w	k0, @k1
+! jump to handler
+	mov.l	2f, k2
+	mov.l	3f, k3
+	mov.l	@k2, k2
+
+	mov.l	4f, k1
+	jmp	@k1
+	nop
+
+	.align	2
+1:	.long	EXPEVT
+2:	.long	INTEVT
+3:	.long	ret_from_irq
+4:	.long	handle_exception
+5:	.long	0xffffff68
+6:	.word	0x0524
+
+ENTRY(wakeup_end)
+	nop
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 71f315663cc..60ab17ad605 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -8,22 +8,22 @@
  *
  * Setup code for an HP680  (internal peripherials only)
  */
-
+#include <linux/types.h>
 #include <linux/init.h>
-#include <asm/io.h>
 #include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/hp6xx/hp6xx.h>
 #include <asm/cpu/dac.h>
 
-const char *get_system_type(void)
-{
-	return "HP6xx";
-}
+#define	SCPCR	0xa4000116
+#define SCPDR	0xa4000136
 
-int __init platform_setup(void)
+static void __init hp6xx_setup(char **cmdline_p)
 {
 	u8 v8;
 	u16 v;
+
 	v = inw(HD64461_STBCR);
 	v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
 	    HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
@@ -50,5 +50,51 @@ int __init platform_setup(void)
 	v8 &= ~DACR_DAE;
 	ctrl_outb(v8,DACR);
 
-	return 0;
+	v8 = ctrl_inb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	ctrl_outb(v8, SCPDR);
+
+	v = ctrl_inw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	ctrl_outw(v, SCPCR);
 }
+
+/*
+ * XXX: This is stupid, we should have a generic machine vector for the cchips
+ * and just wrap the platform setup code in to this, as it's the only thing
+ * that ends up being different.
+ */
+struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
+
+	.mv_inb = hd64461_inb,
+	.mv_inw = hd64461_inw,
+	.mv_inl = hd64461_inl,
+	.mv_outb = hd64461_outb,
+	.mv_outw = hd64461_outw,
+	.mv_outl = hd64461_outl,
+
+	.mv_inb_p = hd64461_inb_p,
+	.mv_inw_p = hd64461_inw,
+	.mv_inl_p = hd64461_inl,
+	.mv_outb_p = hd64461_outb_p,
+	.mv_outw_p = hd64461_outw,
+	.mv_outl_p = hd64461_outl,
+
+	.mv_insb = hd64461_insb,
+	.mv_insw = hd64461_insw,
+	.mv_insl = hd64461_insl,
+	.mv_outsb = hd64461_outsb,
+	.mv_outsw = hd64461_outsw,
+	.mv_outsl = hd64461_outsl,
+
+	.mv_readw = hd64461_readw,
+	.mv_writew = hd64461_writew,
+
+	.mv_irq_demux = hd64461_irq_demux,
+};
+ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile
new file mode 100644
index 00000000000..89e4beb2ad4
--- /dev/null
+++ b/arch/sh/boards/landisk/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
+#
+
+obj-y	 := setup.o io.o irq.o rtc.o landisk_pwb.o
diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c
new file mode 100644
index 00000000000..92498b4947d
--- /dev/null
+++ b/arch/sh/boards/landisk/io.c
@@ -0,0 +1,250 @@
+/*
+ * arch/sh/boards/landisk/io.c
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modifed by kogiidena
+ * 2005.03.03
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+extern void *area5_io_base;	/* Area 5 I/O Base address */
+extern void *area6_io_base;	/* Area 6 I/O Base address */
+
+static inline unsigned long port2adr(unsigned int port)
+{
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		if (port == 0x3f6)
+			return ((unsigned long)area5_io_base + 0x2c);
+		else
+			return ((unsigned long)area5_io_base + PA_PIDE_OFFSET +
+				((port - 0x1f0) << 1));
+	else if ((0x170 <= port && port < 0x178) || port == 0x376)
+		if (port == 0x376)
+			return ((unsigned long)area6_io_base + 0x2c);
+		else
+			return ((unsigned long)area6_io_base + PA_SIDE_OFFSET +
+				((port - 0x170) << 1));
+	else
+		maybebadio((unsigned long)port);
+
+	return port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+u8 landisk_inb(unsigned long port)
+{
+	if (PXSEG(port))
+		return ctrl_inb(port);
+	else if (is_pci_ioaddr(port))
+		return ctrl_inb(pci_ioaddr(port));
+
+	return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 landisk_inb_p(unsigned long port)
+{
+	u8 v;
+
+	if (PXSEG(port))
+		v = ctrl_inb(port);
+	else if (is_pci_ioaddr(port))
+		v = ctrl_inb(pci_ioaddr(port));
+	else
+		v = ctrl_inw(port2adr(port)) & 0xff;
+
+	ctrl_delay();
+
+	return v;
+}
+
+u16 landisk_inw(unsigned long port)
+{
+	if (PXSEG(port))
+		return ctrl_inw(port);
+	else if (is_pci_ioaddr(port))
+		return ctrl_inw(pci_ioaddr(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+u32 landisk_inl(unsigned long port)
+{
+	if (PXSEG(port))
+		return ctrl_inl(port);
+	else if (is_pci_ioaddr(port))
+		return ctrl_inl(pci_ioaddr(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+void landisk_outb(u8 value, unsigned long port)
+{
+	if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (is_pci_ioaddr(port))
+		ctrl_outb(value, pci_ioaddr(port));
+	else
+		ctrl_outw(value, port2adr(port));
+}
+
+void landisk_outb_p(u8 value, unsigned long port)
+{
+	if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (is_pci_ioaddr(port))
+		ctrl_outb(value, pci_ioaddr(port));
+	else
+		ctrl_outw(value, port2adr(port));
+	ctrl_delay();
+}
+
+void landisk_outw(u16 value, unsigned long port)
+{
+	if (PXSEG(port))
+		ctrl_outw(value, port);
+	else if (is_pci_ioaddr(port))
+		ctrl_outw(value, pci_ioaddr(port));
+	else
+		maybebadio(port);
+}
+
+void landisk_outl(u32 value, unsigned long port)
+{
+	if (PXSEG(port))
+		ctrl_outl(value, port);
+	else if (is_pci_ioaddr(port))
+		ctrl_outl(value, pci_ioaddr(port));
+	else
+		maybebadio(port);
+}
+
+void landisk_insb(unsigned long port, void *dst, unsigned long count)
+{
+        volatile u16 *p;
+        u8 *buf = dst;
+
+        if (PXSEG(port)) {
+                while (count--)
+                        *buf++ = *(volatile u8 *)port;
+	} else if (is_pci_ioaddr(port)) {
+                volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+                while (count--)
+                        *buf++ = *bp;
+	} else {
+                p = (volatile u16 *)port2adr(port);
+                while (count--)
+                        *buf++ = *p & 0xff;
+	}
+}
+
+void landisk_insw(unsigned long port, void *dst, unsigned long count)
+{
+        volatile u16 *p;
+        u16 *buf = dst;
+
+	if (PXSEG(port))
+		p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port))
+		p = (volatile u16 *)pci_ioaddr(port);
+	else
+		p = (volatile u16 *)port2adr(port);
+	while (count--)
+		*buf++ = *p;
+}
+
+void landisk_insl(unsigned long port, void *dst, unsigned long count)
+{
+        u32 *buf = dst;
+
+	if (is_pci_ioaddr(port)) {
+                volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+                while (count--)
+                        *buf++ = *p;
+	} else
+		maybebadio(port);
+}
+
+void landisk_outsb(unsigned long port, const void *src, unsigned long count)
+{
+        volatile u16 *p;
+        const u8 *buf = src;
+
+	if (PXSEG(port))
+                while (count--)
+                        ctrl_outb(*buf++, port);
+	else if (is_pci_ioaddr(port)) {
+                volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+                while (count--)
+                        *bp = *buf++;
+	} else {
+                p = (volatile u16 *)port2adr(port);
+                while (count--)
+                        *p = *buf++;
+	}
+}
+
+void landisk_outsw(unsigned long port, const void *src, unsigned long count)
+{
+        volatile u16 *p;
+        const u16 *buf = src;
+
+	if (PXSEG(port))
+                p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port))
+                p = (volatile u16 *)pci_ioaddr(port);
+	else
+                p = (volatile u16 *)port2adr(port);
+
+        while (count--)
+                *p = *buf++;
+}
+
+void landisk_outsl(unsigned long port, const void *src, unsigned long count)
+{
+        const u32 *buf = src;
+
+	if (is_pci_ioaddr(port)) {
+                volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+                while (count--)
+                        *p = *buf++;
+	} else
+		maybebadio(port);
+}
+
+void __iomem *landisk_ioport_map(unsigned long port, unsigned int size)
+{
+        if (PXSEG(port))
+                return (void __iomem *)port;
+        else if (is_pci_ioaddr(port))
+                return (void __iomem *)pci_ioaddr(port);
+
+        return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
new file mode 100644
index 00000000000..a006d644322
--- /dev/null
+++ b/arch/sh/boards/landisk/irq.c
@@ -0,0 +1,99 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modified by kogiidena
+ * 2005.03.03
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/landisk/iodata_landisk.h>
+
+static void enable_landisk_irq(unsigned int irq);
+static void disable_landisk_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_landisk_irq disable_landisk_irq
+
+static void ack_landisk_irq(unsigned int irq);
+static void end_landisk_irq(unsigned int irq);
+
+static unsigned int startup_landisk_irq(unsigned int irq)
+{
+	enable_landisk_irq(irq);
+	return 0;		/* never anything pending */
+}
+
+static void disable_landisk_irq(unsigned int irq)
+{
+	unsigned char val;
+	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inb(PA_IMASK);
+	val &= mask;
+	ctrl_outb(val, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+	unsigned char val;
+	unsigned char value = (0x01 << (irq - 5));
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inb(PA_IMASK);
+	val |= value;
+	ctrl_outb(val, PA_IMASK);
+}
+
+static void ack_landisk_irq(unsigned int irq)
+{
+	disable_landisk_irq(irq);
+}
+
+static void end_landisk_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_landisk_irq(irq);
+}
+
+static struct hw_interrupt_type landisk_irq_type = {
+	.typename = "LANDISK IRQ",
+	.startup = startup_landisk_irq,
+	.shutdown = shutdown_landisk_irq,
+	.enable = enable_landisk_irq,
+	.disable = disable_landisk_irq,
+	.ack = ack_landisk_irq,
+	.end = end_landisk_irq
+};
+
+static void make_landisk_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &landisk_irq_type;
+	disable_landisk_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	int i;
+
+	for (i = 5; i < 14; i++)
+		make_landisk_irq(i);
+}
diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c
new file mode 100644
index 00000000000..e75cb578a28
--- /dev/null
+++ b/arch/sh/boards/landisk/landisk_pwb.c
@@ -0,0 +1,348 @@
+/*
+ * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch.
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ *
+ * LED control drive function added by kogiidena
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/major.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/landisk/iodata_landisk.h>
+
+#define SHUTDOWN_BTN_MINOR	1	/* Shutdown button device minor no. */
+#define LED_MINOR	       21	/* LED minor no. */
+#define BTN_MINOR	       22	/* BUTTON minor no. */
+#define GIO_MINOR	       40	/* GIO minor no. */
+
+static int openCnt;
+static int openCntLED;
+static int openCntGio;
+static int openCntBtn;
+static int landisk_btn;
+static int landisk_btnctrlpid;
+/*
+ * Functions prototypes
+ */
+
+static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+		     unsigned long arg);
+
+static int swdrv_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	filp->private_data = (void *)minor;
+
+	if (minor == SHUTDOWN_BTN_MINOR) {
+		if (openCnt > 0) {
+			return -EALREADY;
+		} else {
+			openCnt++;
+			return 0;
+		}
+	} else if (minor == LED_MINOR) {
+		if (openCntLED > 0) {
+			return -EALREADY;
+		} else {
+			openCntLED++;
+			return 0;
+		}
+	} else if (minor == BTN_MINOR) {
+		if (openCntBtn > 0) {
+			return -EALREADY;
+		} else {
+			openCntBtn++;
+			return 0;
+		}
+	} else if (minor == GIO_MINOR) {
+		if (openCntGio > 0) {
+			return -EALREADY;
+		} else {
+			openCntGio++;
+			return 0;
+		}
+	}
+	return -ENOENT;
+
+}
+
+static int swdrv_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor == SHUTDOWN_BTN_MINOR) {
+		openCnt--;
+	} else if (minor == LED_MINOR) {
+		openCntLED--;
+	} else if (minor == BTN_MINOR) {
+		openCntBtn--;
+	} else if (minor == GIO_MINOR) {
+		openCntGio--;
+	}
+	return 0;
+}
+
+static int swdrv_read(struct file *filp, char *buff, size_t count,
+		      loff_t * ppos)
+{
+	int minor;
+	minor = (int)(filp->private_data);
+
+	if (!access_ok(VERIFY_WRITE, (void *)buff, count))
+		return -EFAULT;
+
+	if (minor == SHUTDOWN_BTN_MINOR) {
+		if (landisk_btn & 0x10) {
+			put_user(1, buff);
+			return 1;
+		} else {
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static int swdrv_write(struct file *filp, const char *buff, size_t count,
+		       loff_t * ppos)
+{
+	int minor;
+	minor = (int)(filp->private_data);
+
+	if (minor == SHUTDOWN_BTN_MINOR) {
+		return count;
+	}
+	return count;
+}
+
+static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS)));
+	disable_irq(IRQ_BUTTON);
+	disable_irq(IRQ_POWER);
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	if (landisk_btnctrlpid != 0) {
+		kill_proc(landisk_btnctrlpid, SIGUSR1, 1);
+		landisk_btnctrlpid = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct file_operations swdrv_fops = {
+	.read = swdrv_read,	/* read */
+	.write = swdrv_write,	/* write */
+	.open = swdrv_open,	/* open */
+	.release = swdrv_close,	/* release */
+	.ioctl = gio_ioctl,	/* ioctl */
+
+};
+
+static char banner[] __initdata =
+    KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n";
+
+int __init swdrv_init(void)
+{
+	int error;
+
+	printk("%s", banner);
+
+	openCnt = 0;
+	openCntLED = 0;
+	openCntBtn = 0;
+	openCntGio = 0;
+	landisk_btn = 0;
+	landisk_btnctrlpid = 0;
+
+	if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) {
+		printk(KERN_ERR
+		       "Button, LED and GIO driver:Couldn't register driver, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) {
+		printk(KERN_ERR "Unable to get IRQ 11.\n");
+		return 1;
+	}
+	if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) {
+		printk(KERN_ERR "Unable to get IRQ 12.\n");
+		return 1;
+	}
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	return 0;
+}
+
+module_init(swdrv_init);
+
+/*
+ * gio driver
+ *
+ */
+
+#include <asm/landisk/gio.h>
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+		     unsigned int cmd, unsigned long arg)
+{
+	int minor;
+	unsigned int data, mask;
+	static unsigned int addr = 0;
+
+	minor = (int)(filp->private_data);
+
+	/* access control */
+	if (minor == GIO_MINOR) {
+		;
+	} else if (minor == LED_MINOR) {
+		if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) {
+			;
+		} else {
+			return -EINVAL;
+		}
+	} else if (minor == BTN_MINOR) {
+		if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) {
+			;
+		} else {
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* addres set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		ctrl_outb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		ctrl_outl(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = ctrl_inb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = ctrl_inw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = ctrl_inl(addr);
+		break;
+	case GIODRV_IOCSGIO_LED:	/* write */
+		mask = ((data & 0x00ffffff) << 8)
+		    | ((data & 0x0000ffff) << 16)
+		    | ((data & 0x000000ff) << 24);
+		landisk_ledparam = data & (~mask);
+		if (landisk_arch == 0) {	/* arch == landisk */
+			landisk_ledparam &= 0x03030303;
+			mask = (~(landisk_ledparam >> 22)) & 0x000c;
+			landisk_ledparam |= mask;
+		} else {	                /* arch == usl-5p */
+			mask = (landisk_ledparam >> 24) & 0x0001;
+			landisk_ledparam |= mask;
+			landisk_ledparam &= 0x007f7f7f;
+		}
+		landisk_ledparam |= 0x80;
+		break;
+	case GIODRV_IOCGGIO_LED:	/* read */
+		data = landisk_ledparam;
+		if (landisk_arch == 0) {	/* arch == landisk */
+			data &= 0x03030303;
+		} else {	                /* arch == usl-5p */
+			;
+		}
+		data &= (~0x080);
+		break;
+	case GIODRV_IOCSGIO_BUZZER:	/* write */
+		landisk_buzzerparam = data;
+		landisk_ledparam |= 0x80;
+		break;
+	case GIODRV_IOCGGIO_LANDISK:	/* read */
+		data = landisk_arch & 0x01;
+		break;
+	case GIODRV_IOCGGIO_BTN:	/* read */
+		data = (0x0ff & ctrl_inb(PA_PWRINT_CLR));
+		data <<= 8;
+		data |= (0x0ff & ctrl_inb(PA_IMASK));
+		data <<= 8;
+		data |= (0x0ff & landisk_btn);
+		data <<= 8;
+		data |= (0x0ff & (~ctrl_inb(PA_STATUS)));
+		break;
+	case GIODRV_IOCSGIO_BTNPID:	/* write */
+		landisk_btnctrlpid = data;
+		landisk_btn = 0;
+		if (irq_desc[IRQ_BUTTON].depth) {
+			enable_irq(IRQ_BUTTON);
+		}
+		if (irq_desc[IRQ_POWER].depth) {
+			enable_irq(IRQ_POWER);
+		}
+		break;
+	case GIODRV_IOCGGIO_BTNPID:	/* read */
+		data = landisk_btnctrlpid;
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c
new file mode 100644
index 00000000000..35ba726a097
--- /dev/null
+++ b/arch/sh/boards/landisk/rtc.c
@@ -0,0 +1,93 @@
+/*
+ * arch/sh/boards/landisk/rtc.c --  RTC support
+ *
+ *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
+ *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
+ */
+/*
+ * modifed by kogiidena
+ * 2005.09.16
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/bcd.h>
+#include <asm/rtc.h>
+
+extern spinlock_t rtc_lock;
+
+extern void
+rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon,
+		      unsigned int BCD_day, unsigned int BCD_hr,
+		      unsigned int BCD_min, unsigned int BCD_sec);
+
+extern unsigned long
+rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon,
+		      unsigned int *BCD_day, unsigned int *BCD_hr,
+		      unsigned int *BCD_min, unsigned int *BCD_sec);
+
+void landisk_rtc_gettimeofday(struct timespec *tv)
+{
+	unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	tv->tv_sec = rs5c313_get_cmos_time
+	    (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+	tv->tv_nsec = 0;
+	spin_unlock_irqrestore(&rtc_lock, flags);
+}
+
+int landisk_rtc_settimeofday(const time_t secs)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned long flags;
+	unsigned long nowtime = secs;
+	unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	rs5c313_get_cmos_time
+	  (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+	cmos_minutes = BCD_min;
+	BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+		real_minutes += 30;	/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		BIN_TO_BCD(real_seconds);
+		BIN_TO_BCD(real_minutes);
+		rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr,
+				      real_minutes, real_seconds);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_time: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return retval;
+}
+
+void landisk_time_init(void)
+{
+	rtc_sh_get_time = landisk_rtc_gettimeofday;
+	rtc_sh_set_time = landisk_rtc_settimeofday;
+}
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
new file mode 100644
index 00000000000..127b9e020e0
--- /dev/null
+++ b/arch/sh/boards/landisk/setup.c
@@ -0,0 +1,177 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Modified for LANDISK by
+ * Atom Create Engineering Co., Ltd. 2002.
+ *
+ * modifed by kogiidena
+ * 2005.09.16
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/io.h>
+
+void landisk_time_init(void);
+void init_landisk_IRQ(void);
+
+int landisk_ledparam;
+int landisk_buzzerparam;
+int landisk_arch;
+
+/* cycle the led's in the clasic knightrider/sun pattern */
+static void heartbeat_landisk(void)
+{
+	static unsigned int cnt = 0, blink = 0x00, period = 25;
+        volatile u8 *p = (volatile u8 *)PA_LED;
+	char data;
+
+        if ((landisk_ledparam & 0x080) == 0)
+		return;
+
+	cnt += 1;
+
+        if (cnt < period)
+		return;
+
+	cnt = 0;
+	blink++;
+
+	data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0;
+	data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0;
+	data |= landisk_ledparam;
+
+	/* buzzer */
+	if (landisk_buzzerparam & 0x1) {
+		data |= 0x80;
+	} else {
+		data &= 0x7f;
+	}
+	*p = data;
+
+        if (((landisk_ledparam & 0x007f7f00) == 0) &&
+             (landisk_buzzerparam == 0))
+		landisk_ledparam &= (~0x0080);
+
+	landisk_buzzerparam >>= 1;
+}
+
+static void landisk_power_off(void)
+{
+        ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static void check_usl5p(void)
+{
+        volatile u8 *p = (volatile u8 *)PA_LED;
+        u8 tmp1, tmp2;
+
+        tmp1 = *p;
+        *p = 0x40;
+        tmp2 = *p;
+        *p = tmp1;
+
+        landisk_arch = (tmp2 == 0x40);
+        if (landisk_arch == 1) {
+                /* arch == usl-5p */
+                landisk_ledparam = 0x00000380;
+                landisk_ledparam |= (tmp1 & 0x07c);
+        } else {
+                /* arch == landisk */
+                landisk_ledparam = 0x02000180;
+                landisk_ledparam |= 0x04;
+        }
+}
+
+void *area5_io_base;
+void *area6_io_base;
+
+static int __init landisk_cf_init(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase, psize;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	psize = PAGE_SIZE;
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+	if (!area5_io_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	paddrbase = virt_to_phys((void *)PA_AREA6_IO);
+	psize = PAGE_SIZE;
+	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
+	area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+	if (!area6_io_base) {
+		printk("allocate_cf_area : can't open HDD I/O window!\n");
+		return -ENOMEM;
+	}
+
+	printk(KERN_INFO "Allocate Area5/6 success.\n");
+
+	/* XXX : do we need attribute and common-memory area also? */
+
+	return 0;
+}
+
+static void __init landisk_setup(char **cmdline_p)
+{
+	device_initcall(landisk_cf_init);
+
+	landisk_buzzerparam = 0;
+	check_usl5p();
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+
+	board_time_init = landisk_time_init;
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_setup = landisk_setup,
+	.mv_nr_irqs = 72,
+	.mv_inb = landisk_inb,
+	.mv_inw = landisk_inw,
+	.mv_inl = landisk_inl,
+	.mv_outb = landisk_outb,
+	.mv_outw = landisk_outw,
+	.mv_outl = landisk_outl,
+	.mv_inb_p = landisk_inb_p,
+	.mv_inw_p = landisk_inw,
+	.mv_inl_p = landisk_inl,
+	.mv_outb_p = landisk_outb_p,
+	.mv_outw_p = landisk_outw,
+	.mv_outl_p = landisk_outl,
+	.mv_insb = landisk_insb,
+	.mv_insw = landisk_insw,
+	.mv_insl = landisk_insl,
+	.mv_outsb = landisk_outsb,
+	.mv_outsw = landisk_outsw,
+	.mv_outsl = landisk_outsl,
+	.mv_ioport_map = landisk_ioport_map,
+	.mv_init_irq = init_landisk_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat = heartbeat_landisk,
+#endif
+};
+ALIAS_MV(landisk)
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
index a76c655dcee..03b123a4bba 100644
--- a/arch/sh/boards/mpc1211/rtc.c
+++ b/arch/sh/boards/mpc1211/rtc.c
@@ -130,7 +130,7 @@ int mpc1211_rtc_settimeofday(const struct timeval *tv)
 
 void mpc1211_time_init(void)
 {
-	rtc_get_time = mpc1211_rtc_gettimeofday;
-	rtc_set_time = mpc1211_rtc_settimeofday;
+	rtc_sh_get_time = mpc1211_rtc_gettimeofday;
+	rtc_sh_set_time = mpc1211_rtc_settimeofday;
 }
 
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 2bfb221cc35..8eb5d430397 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -10,14 +10,12 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/interrupt.h>
-
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/mpc1211/mpc1211.h>
 #include <asm/mpc1211/pci.h>
 #include <asm/mpc1211/m1543c.h>
 
-
 /* ALI15X3 SMBus address offsets */
 #define SMBHSTSTS   (0 + 0x3100)
 #define SMBHSTCNT   (1 + 0x3100)
@@ -50,11 +48,6 @@
 #define ALI15X3_STS_TERM	0x80	/* terminated by abort */
 #define ALI15X3_STS_ERR		0xE0	/* all the bad error bits */
 
-const char *get_system_type(void)
-{
-	return "Interface MPC-1211(CTP/PCI/MPC-SH02)";
-}
-
 static void __init pci_write_config(unsigned long busNo,
 				    unsigned long devNo,
 				    unsigned long fncNo,
@@ -80,9 +73,6 @@ volatile unsigned long irq_err_count;
 
 static void disable_mpc1211_irq(unsigned int irq)
 {
-	unsigned long flags;
-
-	save_and_cli(flags);
 	if( irq < 8) {
 		m_irq_mask |= (1 << irq);
 		outb(m_irq_mask,I8259_M_MR);
@@ -90,16 +80,11 @@ static void disable_mpc1211_irq(unsigned int irq)
 		s_irq_mask |= (1 << (irq - 8));
 		outb(s_irq_mask,I8259_S_MR);
 	}
-	restore_flags(flags);
 
 }
 
 static void enable_mpc1211_irq(unsigned int irq)
 {
-	unsigned long flags;
-
-	save_and_cli(flags);
-
 	if( irq < 8) {
 		m_irq_mask &= ~(1 << irq);
 		outb(m_irq_mask,I8259_M_MR);
@@ -107,7 +92,6 @@ static void enable_mpc1211_irq(unsigned int irq)
 		s_irq_mask &= ~(1 << (irq - 8));
 		outb(s_irq_mask,I8259_S_MR);
 	}
-	restore_flags(flags);
 }
 
 static inline int mpc1211_irq_real(unsigned int irq)
@@ -131,10 +115,6 @@ static inline int mpc1211_irq_real(unsigned int irq)
 
 static void mask_and_ack_mpc1211(unsigned int irq)
 {
-	unsigned long flags;
-
-	save_and_cli(flags);
-
 	if(irq < 8) {
 		if(m_irq_mask & (1<<irq)){
 		  if(!mpc1211_irq_real(irq)){
@@ -162,7 +142,6 @@ static void mask_and_ack_mpc1211(unsigned int irq)
 		outb(0x60+(irq-8),I8259_S_CR); 	/* EOI */
 		outb(0x60+2,I8259_M_CR);
 	}
-	restore_flags(flags);
 }
 
 static void end_mpc1211_irq(unsigned int irq)
@@ -219,7 +198,7 @@ int mpc1211_irq_demux(int irq)
 	return irq;
 }
 
-void __init init_mpc1211_IRQ(void)
+static void __init init_mpc1211_IRQ(void)
 {
 	int i;
 	/*
@@ -255,23 +234,12 @@ void __init init_mpc1211_IRQ(void)
 	}
 }
 
-/*
-  Initialize the board
-*/
-
-
-static void delay (void)
-{
-	volatile unsigned short tmp;
-	tmp = *(volatile unsigned short *) 0xa0000000;
-}
-
-static void delay1000 (void)
+static void delay1000(void)
 {
 	int i;
 
 	for (i=0; i<1000; i++)
-		delay ();
+		ctrl_delay();
 }
 
 static int put_smb_blk(unsigned char *p, int address, int command, int no)
@@ -314,26 +282,10 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no)
 	return 0;
 }
 
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_mpc1211 __initmv = {
-	.mv_nr_irqs		= 48,
-	.mv_irq_demux		= mpc1211_irq_demux,
-	.mv_init_irq		= init_mpc1211_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_mpc1211,
-#endif
-};
-
-ALIAS_MV(mpc1211)
-
 /* arch/sh/boards/mpc1211/rtc.c */
 void mpc1211_time_init(void);
 
-int __init platform_setup(void)
+static void __init mpc1211_setup(char **cmdline_p)
 {
 	unsigned char spd_buf[128];
 
@@ -357,3 +309,18 @@ int __init platform_setup(void)
 	return 0;
 }
 
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_mpc1211 __initmv = {
+	.mv_name		= "Interface MPC-1211(CTP/PCI/MPC-SH02)",
+	.mv_setup		= mpc1211_setup,
+	.mv_nr_irqs		= 48,
+	.mv_irq_demux		= mpc1211_irq_demux,
+	.mv_init_irq		= init_mpc1211_IRQ,
+
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_mpc1211,
+#endif
+};
+ALIAS_MV(mpc1211)
diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile
deleted file mode 100644
index 245f03baf76..00000000000
--- a/arch/sh/boards/overdrive/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the STMicroelectronics Overdrive specific parts of the kernel
-#
-
-obj-y	 := mach.o setup.o io.o irq.o led.o
-
-obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o
-
diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c
deleted file mode 100644
index 956c2390122..00000000000
--- a/arch/sh/boards/overdrive/fpga.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * This file handles programming up the Altera Flex10K that interfaces to
- * the Galileo, and does the PS/2 keyboard and mouse
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-
-#include <asm/overdriver/gt64111.h>
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/fpga.h>
-
-#define FPGA_NotConfigHigh()  (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
-#define FPGA_NotConfigLow()   (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
-
-/* I need to find out what (if any) the real delay factor here is */
-/* The delay is definately not critical */
-#define long_delay() {int i;for(i=0;i<10000;i++);}
-#define short_delay() {int i;for(i=0;i<100;i++);}
-
-static void __init program_overdrive_fpga(const unsigned char *fpgacode,
-					  int size)
-{
-	int timeout = 0;
-	int i, j;
-	unsigned char b;
-	static volatile unsigned char *FPGA_ControlReg =
-	    (volatile unsigned char *) (OVERDRIVE_CTRL);
-	static volatile unsigned char *FPGA_ProgramReg =
-	    (volatile unsigned char *) (FPGA_DCLK_ADDRESS);
-
-	printk("FPGA:  Commencing FPGA Programming\n");
-
-	/* The PCI reset but MUST be low when programming the FPGA !!! */
-	b = (*FPGA_ControlReg) & RESET_PCI_MASK;
-
-	(*FPGA_ControlReg) = b;
-
-	/* Prepare FPGA to program */
-
-	FPGA_NotConfigHigh();
-	long_delay();
-
-	FPGA_NotConfigLow();
-	short_delay();
-
-	while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
-		printk("FPGA:  Waiting for NotStatus to go Low ... \n");
-	}
-
-	FPGA_NotConfigHigh();
-
-	/* Wait for FPGA "ready to be programmed" signal */
-	printk("FPGA:  Waiting for NotStatus to go high (FPGA ready)... \n");
-
-	for (timeout = 0;
-	     (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
-	      && (timeout < FPGA_TIMEOUT)); timeout++);
-
-	/* Check if timeout condition occured - i.e. an error */
-
-	if (timeout == FPGA_TIMEOUT) {
-		printk
-		    ("FPGA:  Failed to program - Timeout waiting for notSTATUS to go high\n");
-		return;
-	}
-
-	printk("FPGA:  Copying data to FPGA ... %d bytes\n", size);
-
-	/* Copy array to FPGA - bit at a time */
-
-	for (i = 0; i < size; i++) {
-		volatile unsigned w = 0;
-
-		for (j = 0; j < 8; j++) {
-			*FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
-			short_delay();
-		}
-		if ((i & 0x3ff) == 0) {
-			printk(".");
-		}
-	}
-
-	/* Waiting for CONFDONE to go high - means the program is complete  */
-
-	for (timeout = 0;
-	     (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
-	      && (timeout < FPGA_TIMEOUT)); timeout++) {
-
-		*FPGA_ProgramReg = 0x0;
-		long_delay();
-	}
-
-	if (timeout == FPGA_TIMEOUT) {
-		printk
-		    ("FPGA:  Failed to program - Timeout waiting for CONFDONE to go high\n");
-		return;
-	} else {		/* Clock another 10 times - gets the device into a working state      */
-		for (i = 0; i < 10; i++) {
-			*FPGA_ProgramReg = 0x0;
-			short_delay();
-		}
-	}
-
-	printk("FPGA:  Programming complete\n");
-}
-
-
-static const unsigned char __init fpgacode[] = {
-#include "./overdrive.ttf"	/* Code from maxplus2 compiler */
-	, 0, 0
-};
-
-
-int __init init_overdrive_fpga(void)
-{
-	program_overdrive_fpga(fpgacode, sizeof(fpgacode));
-
-	return 0;
-}
diff --git a/arch/sh/boards/overdrive/galileo.c b/arch/sh/boards/overdrive/galileo.c
deleted file mode 100644
index 29e48971bba..00000000000
--- a/arch/sh/boards/overdrive/galileo.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * This file contains the PCI routines required for the Galileo GT6411 
- * PCI bridge as used on the Orion and Overdrive boards.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/gt64111.h>
-
-
-/* After boot, we shift the Galileo registers so that they appear 
- * in BANK6, along with IO space. This means we can have one contingous
- * lump of PCI address space without these registers appearing in the 
- * middle of them 
- */
-
-#define GT64111_BASE_ADDRESS  0xbb000000
-#define GT64111_IO_BASE_ADDRESS  0x1000
-/* The GT64111 registers appear at this address to the SH4 after reset */
-#define RESET_GT64111_BASE_ADDRESS           0xb4000000
-
-/* Macros used to access the Galileo registers */
-#define RESET_GT64111_REG(x) (RESET_GT64111_BASE_ADDRESS+x)
-#define GT64111_REG(x) (GT64111_BASE_ADDRESS+x)
-
-#define RESET_GT_WRITE(x,v) writel((v),RESET_GT64111_REG(x))
-
-#define RESET_GT_READ(x) readl(RESET_GT64111_REG(x))
-
-#define GT_WRITE(x,v) writel((v),GT64111_REG(x))
-#define GT_WRITE_BYTE(x,v) writeb((v),GT64111_REG(x))
-#define GT_WRITE_SHORT(x,v) writew((v),GT64111_REG(x))
-
-#define GT_READ(x)    readl(GT64111_REG(x))
-#define GT_READ_BYTE(x)  readb(GT64111_REG(x))
-#define GT_READ_SHORT(x) readw(GT64111_REG(x))
-
-
-/* Where the various SH banks start at */
-#define SH_BANK4_ADR 0xb0000000
-#define SH_BANK5_ADR 0xb4000000
-#define SH_BANK6_ADR 0xb8000000
-
-/* Masks out everything but lines 28,27,26 */
-#define BANK_SELECT_MASK 0x1c000000
-
-#define SH4_TO_BANK(x) ( (x) & BANK_SELECT_MASK)
-
-/* 
- * Masks used for address conversaion. Bank 6 is used for IO and 
- * has all the address bits zeroed by the FPGA. Special case this
- */
-#define MEMORY_BANK_MASK 0x1fffffff
-#define IO_BANK_MASK  0x03ffffff
-
-/* Mark bank 6 as the bank used for IO. You can change this in the FPGA code
- * if you want 
- */
-#define IO_BANK_ADR PCI_GTIO_BASE
-
-/* Will select the correct mask to apply depending on the SH$ address */
-#define SELECT_BANK_MASK(x) \
-   ( (SH4_TO_BANK(x)==SH4_TO_BANK(IO_BANK_ADR)) ? IO_BANK_MASK : MEMORY_BANK_MASK)
-
-/* Converts between PCI space and P2 region */
-#define SH4_TO_PCI(x) ((x)&SELECT_BANK_MASK(x))
-
-/* Various macros for figuring out what to stick in the Galileo registers. 
- * You *really* don't want to figure this stuff out by hand, you always get
- * it wrong
- */
-#define GT_MEM_LO_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7ff)
-#define GT_MEM_HI_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7f)
-#define GT_MEM_SUB_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>20)&0xff)
-
-#define PROGRAM_HI_LO(block,a,s) \
-    GT_WRITE(block##_LO_DEC_ADR,GT_MEM_LO_ADR(a));\
-    GT_WRITE(block##_HI_DEC_ADR,GT_MEM_HI_ADR(a+s-1))
-
-#define PROGRAM_SUB_HI_LO(block,a,s) \
-    GT_WRITE(block##_LO_DEC_ADR,GT_MEM_SUB_ADR(a));\
-    GT_WRITE(block##_HI_DEC_ADR,GT_MEM_SUB_ADR(a+s-1))
-
-/* We need to set the size, and the offset register */
-
-#define GT_BAR_MASK(x) ((x)&~0xfff)
-
-/* Macro to set up the BAR in the Galileo. Essentially used for the DRAM */
-#define PROGRAM_GT_BAR(block,a,s) \
-  GT_WRITE(PCI_##block##_BANK_SIZE,GT_BAR_MASK((s-1)));\
-  write_config_to_galileo(PCI_CONFIG_##block##_BASE_ADR,\
-			     GT_BAR_MASK(a))
-
-#define DISABLE_GT_BAR(block) \
-  GT_WRITE(PCI_##block##_BANK_SIZE,0),\
-  GT_CONFIG_WRITE(PCI_CONFIG_##block##_BASE_ADR,\
-    0x80000000)
-
-/* Macros to disable things we are not going to use */
-#define DISABLE_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0x7ff);\
-                          GT_WRITE(x##_HI_DEC_ADR,0x00)
-
-#define DISABLE_SUB_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0xff);\
-                              GT_WRITE(x##_HI_DEC_ADR,0x00)
-
-static void __init reset_pci(void)
-{
-	/* Set RESET_PCI bit high */
-	writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL);
-	udelay(250);
-
-	/* Set RESET_PCI bit low */
-	writeb(readb(OVERDRIVE_CTRL) & RESET_PCI_MASK, OVERDRIVE_CTRL);
-	udelay(250);
-
-	writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL);
-	udelay(250);
-}
-
-static int write_config_to_galileo(int where, u32 val);
-#define GT_CONFIG_WRITE(where,val) write_config_to_galileo(where,val)
-
-#define ENABLE_PCI_DRAM
-
-
-#ifdef TEST_DRAM
-/* Test function to check out if the PCI DRAM is working OK */
-static int  /* __init */ test_dram(unsigned *base, unsigned size)
-{
-	unsigned *p = base;
-	unsigned *end = (unsigned *) (((unsigned) base) + size);
-	unsigned w;
-
-	for (p = base; p < end; p++) {
-		*p = 0xffffffff;
-		if (*p != 0xffffffff) {
-			printk("AAARGH -write failed!!! at %p is %x\n", p,
-			       *p);
-			return 0;
-		}
-		*p = 0x0;
-		if (*p != 0x0) {
-			printk("AAARGH -write failed!!!\n");
-			return 0;
-		}
-	}
-
-	for (p = base; p < end; p++) {
-		*p = (unsigned) p;
-		if (*p != (unsigned) p) {
-			printk("Failed at 0x%p, actually is 0x%x\n", p,
-			       *p);
-			return 0;
-		}
-	}
-
-	for (p = base; p < end; p++) {
-		w = ((unsigned) p & 0xffff0000);
-		*p = w | (w >> 16);
-	}
-
-	for (p = base; p < end; p++) {
-		w = ((unsigned) p & 0xffff0000);
-		w |= (w >> 16);
-		if (*p != w) {
-			printk
-			    ("Failed at 0x%p, should be 0x%x actually is 0x%x\n",
-			     p, w, *p);
-			return 0;
-		}
-	}
-
-	return 1;
-}
-#endif
-
-
-/* Function to set up and initialise the galileo. This sets up the BARS,
- * maps the DRAM into the address space etc,etc
- */
-int __init galileo_init(void)
-{
-	reset_pci();
-
-	/* Now shift the galileo regs into this block */
-	RESET_GT_WRITE(INTERNAL_SPACE_DEC,
-		       GT_MEM_LO_ADR(GT64111_BASE_ADDRESS));
-
-	/* Should have a sanity check here, that you can read back  at the new
-	 * address what you just wrote 
-	 */
-
-	/* Disable decode for all regions */
-	DISABLE_DECODE(RAS10);
-	DISABLE_DECODE(RAS32);
-	DISABLE_DECODE(CS20);
-	DISABLE_DECODE(CS3);
-	DISABLE_DECODE(PCI_IO);
-	DISABLE_DECODE(PCI_MEM0);
-	DISABLE_DECODE(PCI_MEM1);
-
-	/* Disable all BARS */
-	GT_WRITE(BAR_ENABLE_ADR, 0x1ff);
-	DISABLE_GT_BAR(RAS10);
-	DISABLE_GT_BAR(RAS32);
-	DISABLE_GT_BAR(CS20);
-	DISABLE_GT_BAR(CS3);
-
-	/* Tell the BAR where the IO registers now are */
-	GT_CONFIG_WRITE(PCI_CONFIG_INT_REG_IO_ADR,GT_BAR_MASK(
-					    (GT64111_IO_BASE_ADDRESS &
-					     IO_BANK_MASK)));
-	/* set up a 112 Mb decode */
-	PROGRAM_HI_LO(PCI_MEM0, SH_BANK4_ADR, 112 * 1024 * 1024);
-
-	/* Set up a 32 MB io space decode */
-	PROGRAM_HI_LO(PCI_IO, IO_BANK_ADR, 32 * 1024 * 1024);
-
-#ifdef ENABLE_PCI_DRAM
-	/* Program up the DRAM configuration - there is DRAM only in bank 0 */
-	/* Now set up the DRAM decode */
-	PROGRAM_HI_LO(RAS10, PCI_DRAM_BASE, PCI_DRAM_SIZE);
-	/* And the sub decode */
-	PROGRAM_SUB_HI_LO(RAS0, PCI_DRAM_BASE, PCI_DRAM_SIZE);
-
-	DISABLE_SUB_DECODE(RAS1);
-
-	/* Set refresh rate */
-	GT_WRITE(DRAM_BANK0_PARMS, 0x3f);
-	GT_WRITE(DRAM_CFG, 0x100);
-
-	/* we have to lob off the top bits rememeber!! */
-	PROGRAM_GT_BAR(RAS10, SH4_TO_PCI(PCI_DRAM_BASE), PCI_DRAM_SIZE);
-
-#endif
-
-	/* We are only interested in decoding RAS10 and the Galileo's internal 
-	 * registers (as IO) on the PCI bus
-	 */
-#ifdef ENABLE_PCI_DRAM
-	GT_WRITE(BAR_ENABLE_ADR, (~((1 << 8) | (1 << 3))) & 0x1ff);
-#else
-	GT_WRITE(BAR_ENABLE_ADR, (~(1 << 3)) & 0x1ff);
-#endif
-
-	/* Change the class code to host bridge, it actually powers up 
-	 * as a memory controller
-         */
-	GT_CONFIG_WRITE(8, 0x06000011);
-
-	/* Allow the galileo to master the PCI bus */
-	GT_CONFIG_WRITE(PCI_COMMAND,
-			PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			PCI_COMMAND_IO);
-
-
-#if 0
-        printk("Testing PCI DRAM - ");
-	if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) {
-		printk("Passed\n");
-	}else {
-		printk("FAILED\n");
-	}
-#endif
-	return 0;
-
-}
-
-
-#define SET_CONFIG_BITS(bus,devfn,where)\
-  ((1<<31) | ((bus) << 16) | ((devfn) << 8) | ((where) & ~3))
-
-#define CONFIG_CMD(dev, where) SET_CONFIG_BITS((dev)->bus->number,(dev)->devfn,where)
-
-/* This write to the galileo config registers, unlike the functions below, can
- * be used before the PCI subsystem has started up
- */
-static int __init write_config_to_galileo(int where, u32 val)
-{
-	GT_WRITE(PCI_CFG_ADR, SET_CONFIG_BITS(0, 0, where));
-
-	GT_WRITE(PCI_CFG_DATA, val);
-	return 0;
-}
-
-/* We exclude the galileo and slot 31, the galileo because I don't know how to stop
- * the setup code shagging up the setup I have done on it, and 31 because the whole
- * thing locks up if you try to access that slot (which doesn't exist of course anyway
- */
-
-#define EXCLUDED_DEV(dev) ((dev->bus->number==0) && ((PCI_SLOT(dev->devfn)==0) || (PCI_SLOT(dev->devfn) == 31)))
-
-static int galileo_read_config_byte(struct pci_dev *dev, int where,
-				    u8 * val)
-{
-
-        
-	/* I suspect this doesn't work because this drives a special cycle ? */
-	if (EXCLUDED_DEV(dev)) {
-		*val = 0xff;
-		return PCIBIOS_SUCCESSFUL;
-	}
-	/* Start the config cycle */
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-	/* Read back the result */
-	*val = GT_READ_BYTE(PCI_CFG_DATA + (where & 3));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_read_config_word(struct pci_dev *dev, int where,
-				    u16 * val)
-{
-
-        if (EXCLUDED_DEV(dev)) {
-		*val = 0xffff;
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-	*val = GT_READ_SHORT(PCI_CFG_DATA + (where & 2));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_read_config_dword(struct pci_dev *dev, int where,
-				     u32 * val)
-{
-	if (EXCLUDED_DEV(dev)) {
-		*val = 0xffffffff;
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-	*val = GT_READ(PCI_CFG_DATA);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int galileo_write_config_byte(struct pci_dev *dev, int where,
-				     u8 val)
-{
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
-	GT_WRITE_BYTE(PCI_CFG_DATA + (where & 3), val);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_write_config_word(struct pci_dev *dev, int where,
-				     u16 val)
-{
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
-	GT_WRITE_SHORT(PCI_CFG_DATA + (where & 2), val);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int galileo_write_config_dword(struct pci_dev *dev, int where,
-				      u32 val)
-{
-	GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
-	GT_WRITE(PCI_CFG_DATA, val);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_config_ops = {
-	galileo_read_config_byte,
-	galileo_read_config_word,
-	galileo_read_config_dword,
-	galileo_write_config_byte,
-	galileo_write_config_word,
-	galileo_write_config_dword
-};
-
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
-	return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_od_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/* Slot 1: Galileo 
-	 * Slot 2: PCI Slot 1
-	 * Slot 3: PCI Slot 2
-	 * Slot 4: ESS
-	 */
-	switch (slot) {
-	case 2: 
-		return OVERDRIVE_PCI_IRQ1;
-	case 3:
-		/* Note this assumes you have a hacked card in slot 2 */
-		return OVERDRIVE_PCI_IRQ2;
-	case 4:
-		return OVERDRIVE_ESS_IRQ;
-	default:
-		/* printk("PCI: Unexpected IRQ mapping request for slot %d\n", slot); */
-		return -1;
-	}
-}
-
-
-
-void __init
-pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *ranges)
-{
-        ranges->io_start -= bus->resource[0]->start;
-        ranges->io_end -= bus->resource[0]->start;
-        ranges->mem_start -= bus->resource[1]->start;
-        ranges->mem_end -= bus->resource[1]->start;
-}                                                                                
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-void __init pcibios_init(void)
-{
-	static struct resource galio,galmem;
-
-        /* Allocate the registers used by the Galileo */
-        galio.flags = IORESOURCE_IO;
-        galio.name  = "Galileo GT64011";
-        galmem.flags = IORESOURCE_MEM|IORESOURCE_PREFETCH;
-        galmem.name  = "Galileo GT64011 DRAM";
-
-        allocate_resource(&ioport_resource, &galio, 256,
-		    GT64111_IO_BASE_ADDRESS,GT64111_IO_BASE_ADDRESS+256, 256, NULL, NULL);
-        allocate_resource(&iomem_resource, &galmem,PCI_DRAM_SIZE,
-		    PHYSADDR(PCI_DRAM_BASE), PHYSADDR(PCI_DRAM_BASE)+PCI_DRAM_SIZE, 
-			     PCI_DRAM_SIZE, NULL, NULL);
-
-  	/* ok, do the scan man */
-	pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
-
-        pci_assign_unassigned_resources();
-	pci_fixup_irqs(no_swizzle, map_od_irq);
-
-#ifdef TEST_DRAM
-        printk("Testing PCI DRAM - ");
-	if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) {
-		printk("Passed\n");
-	}else {
-		printk("FAILED\n");
-	}
-#endif
-
-}
-
-char * __init pcibios_setup(char *str)
-{
-	return str;
-}
-
-
-
-int pcibios_enable_device(struct pci_dev *dev)
-{
-
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR
-			       "PCI: Device %s not available because"
-			       " of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-
-}
-
-/* We should do some optimisation work here I think. Ok for now though */
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size)
-{
-}
-
-void __init pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			     struct resource *res, int resource)
-{
-
-	unsigned long where, size;
-	u32 reg;
-	
-
-	printk("PCI: Assigning %3s %08lx to %s\n",
-	       res->flags & IORESOURCE_IO ? "IO" : "MEM",
-	       res->start, dev->name);
-
-	where = PCI_BASE_ADDRESS_0 + resource * 4;
-	size = res->end - res->start;
-
-	pci_read_config_dword(dev, where, &reg);
-	reg = (reg & size) | (((u32) (res->start - root->start)) & ~size);
-	pci_write_config_dword(dev, where, reg);
-}
-
-
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	printk("PCI: Assigning IRQ %02d to %s\n", irq, dev->name);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
- *  If we set up a device for bus mastering, we need to check the latency
- *  timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	u8 lat;
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-	if (lat < 16)
-		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
-	else if (lat > pcibios_max_latency)
-		lat = pcibios_max_latency;
-	else
-		return;
-	printk("PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
diff --git a/arch/sh/boards/overdrive/io.c b/arch/sh/boards/overdrive/io.c
deleted file mode 100644
index 4671b6b047b..00000000000
--- a/arch/sh/boards/overdrive/io.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * This file contains the I/O routines for use on the overdrive board
- *
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#include <asm/overdrive/overdrive.h>
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the SuperH architecture, we just read/write the
- * memory location directly.
- */
-
-#define dprintk(x...)
-
-/* Translates an IO address to where it is mapped in memory */
-
-#define io_addr(x) (((unsigned)(x))|PCI_GTIO_BASE)
-
-unsigned char od_inb(unsigned long port)
-{
-dprintk("od_inb(%x)\n", port);
-	return readb(io_addr(port)) & 0xff;
-}
-
-
-unsigned short od_inw(unsigned long port)
-{
-dprintk("od_inw(%x)\n", port);
-	return readw(io_addr(port)) & 0xffff;
-}
-
-unsigned int od_inl(unsigned long port)
-{
-dprintk("od_inl(%x)\n", port);
-	return readl(io_addr(port));
-}
-
-void od_outb(unsigned char value, unsigned long port)
-{
-dprintk("od_outb(%x, %x)\n", value, port);
-	writeb(value, io_addr(port));
-}
-
-void od_outw(unsigned short value, unsigned long port)
-{
-dprintk("od_outw(%x, %x)\n", value, port);
-	writew(value, io_addr(port));
-}
-
-void od_outl(unsigned int value, unsigned long port)
-{
-dprintk("od_outl(%x, %x)\n", value, port);
-	writel(value, io_addr(port));
-}
-
-/* This is horrible at the moment - needs more work to do something sensible */
-#define IO_DELAY() udelay(10)
-
-#define OUT_DELAY(x,type) \
-void od_out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();}
-
-#define IN_DELAY(x,type) \
-unsigned type od_in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;}
-
-
-OUT_DELAY(b,char)
-OUT_DELAY(w,short)
-OUT_DELAY(l,int)
-
-IN_DELAY(b,char)
-IN_DELAY(w,short)
-IN_DELAY(l,int)
-
-
-/*  Now for the string version of these functions */
-void od_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	int i;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p++) {
-		outb(*p, port);
-	}
-}
-
-
-void od_insb(unsigned long port, void *addr, unsigned long count)
-{
-	int i;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p++) {
-		*p = inb(port);
-	}
-}
-
-/* For the 16 and 32 bit string functions, we have to worry about alignment.
- * The SH does not do unaligned accesses, so we have to read as bytes and
- * then write as a word or dword. 
- * This can be optimised a lot more, especially in the case where the data
- * is aligned
- */
-
-void od_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	int i;
-	unsigned short tmp;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p += 2) {
-		tmp = (*p) | ((*(p + 1)) << 8);
-		outw(tmp, port);
-	}
-}
-
-
-void od_insw(unsigned long port, void *addr, unsigned long count)
-{
-	int i;
-	unsigned short tmp;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p += 2) {
-		tmp = inw(port);
-		p[0] = tmp & 0xff;
-		p[1] = (tmp >> 8) & 0xff;
-	}
-}
-
-
-void od_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	int i;
-	unsigned tmp;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p += 4) {
-		tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) |
-		      ((*(p + 3)) << 24);
-		outl(tmp, port);
-	}
-}
-
-
-void od_insl(unsigned long port, void *addr, unsigned long count)
-{
-	int i;
-	unsigned tmp;
-	unsigned char *p = (unsigned char *) addr;
-
-	for (i = 0; i < count; i++, p += 4) {
-		tmp = inl(port);
-		p[0] = tmp & 0xff;
-		p[1] = (tmp >> 8) & 0xff;
-		p[2] = (tmp >> 16) & 0xff;
-		p[3] = (tmp >> 24) & 0xff;
-
-	}
-}
diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c
deleted file mode 100644
index 5d730c70389..00000000000
--- a/arch/sh/boards/overdrive/irq.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Looks after interrupts on the overdrive board.
- *
- * Bases on the IPR irq system
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/overdrive/overdrive.h>
-
-struct od_data {
-	int overdrive_irq;
-	int irq_mask;
-};
-
-#define NUM_EXTERNAL_IRQS 16
-#define EXTERNAL_IRQ_NOT_IN_USE (-1)
-#define EXTERNAL_IRQ_NOT_ASSIGNED (-1)
-
-/*
- * This table is used to determine what to program into the FPGA's CT register
- * for the specified Linux IRQ.
- *
- * The irq_mask gives the interrupt number from the PCI board (PCI_Int(6:0))
- * but is one greater than that because the because the FPGA treats 0
- * as disabled, a value of 1 asserts PCI_Int0, and so on.
- *
- * The overdrive_irq specifies which of the eight interrupt sources generates
- * that interrupt, and but is multiplied by four to give the bit offset into
- * the CT register.
- *
- * The seven interrupts levels (SH4 IRL's) we have available here is hardwired
- * by the EPLD. The assignments here of which PCI interrupt generates each
- * level is arbitary.
- */
-static struct od_data od_data_table[NUM_EXTERNAL_IRQS] = {
-	/*    overdrive_irq       , irq_mask */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 0 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 7},	/* 1 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 6},	/* 2 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 3 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 5},	/* 4 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 5 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 6 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 4},	/* 7 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 8 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 9 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 3},	/* 10 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 2},	/* 11 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 12 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, 1},	/* 13 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE},	/* 14 */
-	{EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}	/* 15 */
-};
-
-static void set_od_data(int overdrive_irq, int irq)
-{
-	if (irq >= NUM_EXTERNAL_IRQS || irq < 0)
-		return;
-	od_data_table[irq].overdrive_irq = overdrive_irq << 2;
-}
-
-static void enable_od_irq(unsigned int irq);
-void disable_od_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_od_irq disable_od_irq
-
-static void mask_and_ack_od(unsigned int);
-static void end_od_irq(unsigned int irq);
-
-static unsigned int startup_od_irq(unsigned int irq)
-{
-	enable_od_irq(irq);
-	return 0;		/* never anything pending */
-}
-
-static struct hw_interrupt_type od_irq_type = {
-	.typename = "Overdrive-IRQ",
-	.startup = startup_od_irq,
-	.shutdown = shutdown_od_irq,
-	.enable = enable_od_irq,
-	.disable = disable_od_irq,
-	.ack = mask_and_ack_od,
-	.end = end_od_irq
-};
-
-static void disable_od_irq(unsigned int irq)
-{
-	unsigned val, flags;
-	int overdrive_irq;
-	unsigned mask;
-
-	/* Not a valid interrupt */
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-        /* Is is necessary to use a cli here? Would a spinlock not be 
-         * mroe efficient?
-         */
-	local_irq_save(flags);
-	overdrive_irq = od_data_table[irq].overdrive_irq;
-	if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) {
-		mask = ~(0x7 << overdrive_irq);
-		val = ctrl_inl(OVERDRIVE_INT_CT);
-		val &= mask;
-		ctrl_outl(val, OVERDRIVE_INT_CT);
-	}
-	local_irq_restore(flags);
-}
-
-static void enable_od_irq(unsigned int irq)
-{
-	unsigned val, flags;
-	int overdrive_irq;
-	unsigned mask;
-
-	/* Not a valid interrupt */
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-	/* Set priority in OD back to original value */
-	local_irq_save(flags);
-	/* This one is not in use currently */
-	overdrive_irq = od_data_table[irq].overdrive_irq;
-	if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) {
-		val = ctrl_inl(OVERDRIVE_INT_CT);
-		mask = ~(0x7 << overdrive_irq);
-		val &= mask;
-		mask = od_data_table[irq].irq_mask << overdrive_irq;
-		val |= mask;
-		ctrl_outl(val, OVERDRIVE_INT_CT);
-	}
-	local_irq_restore(flags);
-}
-
-
-
-/* this functions sets the desired irq handler to be an overdrive type */
-static void __init make_od_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &od_irq_type;
-	disable_od_irq(irq);
-}
-
-
-static void mask_and_ack_od(unsigned int irq)
-{
-	disable_od_irq(irq);
-}
-
-static void end_od_irq(unsigned int irq)
-{
-	enable_od_irq(irq);
-}
-
-void __init init_overdrive_irq(void)
-{
-	int i;
-
-	/* Disable all interrupts */
-	ctrl_outl(0, OVERDRIVE_INT_CT);
-
-	/* Update interrupt pin mode to use encoded interrupts */
-	i = ctrl_inw(INTC_ICR);
-	i &= ~INTC_ICR_IRLM;
-	ctrl_outw(i, INTC_ICR);
-
-	for (i = 0; i < NUM_EXTERNAL_IRQS; i++) {
-		if (od_data_table[i].irq_mask != EXTERNAL_IRQ_NOT_IN_USE) {
-			make_od_irq(i);
-		} else if (i != 15) {	// Cannot use imask on level 15
-			make_imask_irq(i);
-		}
-	}
-
-	/* Set up the interrupts */
-	set_od_data(OVERDRIVE_PCI_INTA, OVERDRIVE_PCI_IRQ1);
-	set_od_data(OVERDRIVE_PCI_INTB, OVERDRIVE_PCI_IRQ2);
-	set_od_data(OVERDRIVE_AUDIO_INT, OVERDRIVE_ESS_IRQ);
-}
diff --git a/arch/sh/boards/overdrive/led.c b/arch/sh/boards/overdrive/led.c
deleted file mode 100644
index 860d7f204a4..00000000000
--- a/arch/sh/boards/overdrive/led.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * linux/arch/sh/overdrive/led.c
- *
- * Copyright (C) 1999 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains an Overdrive specific LED feature.
- */
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/overdrive/overdrive.h>
-
-static void mach_led(int position, int value)
-{
-	unsigned long flags;
-	unsigned long reg;
-
-	local_irq_save(flags);
-	
-	reg = readl(OVERDRIVE_CTRL);
-	if (value) {
-		reg |= (1<<3);
-	} else {
-		reg &= ~(1<<3);
-	}
-	writel(reg, OVERDRIVE_CTRL);
-
-	local_irq_restore(flags);
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat_od(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led( -1, 1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led( -1, 0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/overdrive/mach.c b/arch/sh/boards/overdrive/mach.c
deleted file mode 100644
index 2834a03ae47..00000000000
--- a/arch/sh/boards/overdrive/mach.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/sh/overdrive/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the STMicroelectronics Overdrive
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io_unknown.h>
-#include <asm/io_generic.h>
-#include <asm/overdrive/io.h>
-
-void heartbeat_od(void);
-void init_overdrive_irq(void);
-void galileo_pcibios_init(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_od __initmv = {
-	.mv_nr_irqs		= 48,
-
-	.mv_inb			= od_inb,
-	.mv_inw			= od_inw,
-	.mv_inl			= od_inl,
-	.mv_outb		= od_outb,
-	.mv_outw		= od_outw,
-	.mv_outl		= od_outl,
-
-	.mv_inb_p		= od_inb_p,
-	.mv_inw_p		= od_inw_p,
-	.mv_inl_p		= od_inl_p,
-	.mv_outb_p		= od_outb_p,
-	.mv_outw_p		= od_outw_p,
-	.mv_outl_p		= od_outl_p,
-
-	.mv_insb		= od_insb,
-	.mv_insw		= od_insw,
-	.mv_insl		= od_insl,
-	.mv_outsb		= od_outsb,
-	.mv_outsw		= od_outsw,
-	.mv_outsl		= od_outsl,
-
-#ifdef CONFIG_PCI
-	.mv_init_irq		= init_overdrive_irq,
-#endif
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_od,
-#endif
-};
-
-ALIAS_MV(od)
diff --git a/arch/sh/boards/overdrive/pcidma.c b/arch/sh/boards/overdrive/pcidma.c
deleted file mode 100644
index 1c9bfeda00b..00000000000
--- a/arch/sh/boards/overdrive/pcidma.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Dynamic DMA mapping support.
- *
- * On the overdrive, we can only DMA from memory behind the PCI bus!
- * this means that all DMA'able memory must come from there. 
- * this restriction will not apply to later boards.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-			   dma_addr_t * dma_handle)
-{
-	void *ret;
-	int gfp = GFP_ATOMIC;
-
-        printk("BUG: pci_alloc_consistent() called - not yet supported\n");
-	/* We ALWAYS need DMA memory on the overdrive hardware,
-	 * due to it's extreme weirdness
-	 * Need to flush the cache here as well, since the memory
-	 * can still be seen through the cache!
-	 */
-	gfp |= GFP_DMA;
-	ret = (void *) __get_free_pages(gfp, get_order(size));
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_bus(ret);
-	}
-	return ret;
-}
-
-void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
-{
-	free_pages((unsigned long) vaddr, get_order(size));
-}
diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c
deleted file mode 100644
index a3a7744c204..00000000000
--- a/arch/sh/boards/overdrive/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/sh/overdrive/setup.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * STMicroelectronics Overdrive Support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/fpga.h>
-
-const char *get_system_type(void)
-{
-	return "SH7750 Overdrive";
-}
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
-#ifdef CONFIG_PCI
-	init_overdrive_fpga();
-	galileo_init();
-#endif
-
-        /* Enable RS232 receive buffers */
-	writel(0x1e, OVERDRIVE_CTRL);
-}
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/renesas/edosk7705/Makefile
index 7fccbf2e4a1..14bdd531f11 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/renesas/edosk7705/Makefile
@@ -1,10 +1,6 @@
 #
 # Makefile for the EDOSK7705 specific parts of the kernel
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
 
 obj-y	 := setup.o io.o
 
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c
index ba143fa4afa..ec5be010771 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/renesas/edosk7705/setup.c
@@ -8,19 +8,21 @@
  * Modified for edosk7705 development
  * board by S. Dunn, 2003.
  */
-
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/machvec_init.h>
 #include <asm/edosk7705/io.h>
 
-static void init_edosk7705(void);
+static void __init sh_edosk7705_init_irq(void)
+{
+	/* This is the Ethernet interrupt */
+	make_imask_irq(0x09);
+}
 
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
 	.mv_nr_irqs		= 80,
 
 	.mv_inb			= sh_edosk7705_inb,
@@ -37,23 +39,6 @@ struct sh_machine_vector mv_edosk7705 __initmv = {
 	.mv_outsl		= sh_edosk7705_outsl,
 
 	.mv_isa_port2addr	= sh_edosk7705_isa_port2addr,
-	.mv_init_irq		= init_edosk7705,
+	.mv_init_irq		= sh_edosk7705_init_irq,
 };
 ALIAS_MV(edosk7705)
-
-static void __init init_edosk7705(void)
-{
-	/* This is the Ethernet interrupt */
-	make_imask_irq(0x09);
-}
-
-const char *get_system_type(void)
-{
-	return "EDOSK7705";
-}
-
-void __init platform_setup(void)
-{
-	/* Nothing .. */
-}
-
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
new file mode 100644
index 00000000000..1743be477be
--- /dev/null
+++ b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
@@ -0,0 +1,12 @@
+if SH_HS7751RVOIP
+
+menu "HS7751RVoIP options"
+
+config HS7751RVOIP_CODEC
+	bool "Support VoIP Codec section"
+	help
+	  Selecting this option will support CODEC section.
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile
index e8b4109ace1..e626377c55e 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/Makefile
+++ b/arch/sh/boards/renesas/hs7751rvoip/Makefile
@@ -1,12 +1,8 @@
 #
 # Makefile for the HS7751RVoIP specific parts of the kernel
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
 
-obj-y	 := mach.o setup.o io.o irq.o led.o
+obj-y	 := setup.o io.o irq.o
 
 obj-$(CONFIG_PCI) += pci.o
 
diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c
index 3a1abfa2fef..9ea1136b219 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/io.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/io.c
@@ -10,21 +10,16 @@
  * placeholder code from io_hs7751rvoip.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/hs7751rvoip/hs7751rvoip.h>
 #include <asm/addrspace.h>
 
-#include <linux/module.h>
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-extern void *area5_io8_base;	/* Area 5 8bit I/O Base address */
 extern void *area6_io8_base;	/* Area 6 8bit I/O Base address */
 extern void *area5_io16_base;	/* Area 5 16bit I/O Base address */
-extern void *area6_io16_base;	/* Area 6 16bit I/O Base address */
 
 /*
  * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
@@ -33,25 +28,8 @@ extern void *area6_io16_base;	/* Area 6 16bit I/O Base address */
  * like the other Solution Engine boards.
  */
 
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#if defined(CONFIG_HS7751RVOIP_CODEC)
 #define CODEC_IO_BASE	0x1000
-#endif
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
+#define CODEC_IOMAP(a)	((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
 
 static inline unsigned long port2adr(unsigned int port)
 {
@@ -59,9 +37,10 @@ static inline unsigned long port2adr(unsigned int port)
 		if (port == 0x3f6)
 			return ((unsigned long)area5_io16_base + 0x0c);
 		else
-			return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1));
+			return ((unsigned long)area5_io16_base + 0x800 +
+				((port-0x1f0) << 1));
 	else
-		maybebadio(port2adr, (unsigned long)port);
+		maybebadio((unsigned long)port);
 	return port;
 }
 
@@ -78,25 +57,10 @@ static inline int shifted_port(unsigned long port)
 }
 
 #if defined(CONFIG_HS7751RVOIP_CODEC)
-static inline int
-codec_port(unsigned long port)
-{
-	if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20))
-		return 1;
-	else
-		return 0;
-}
-#endif
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
+#define codec_port(port)	\
+	((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
 #else
-#define CHECK_SH7751_PCIIO(port) (0)
+#define codec_port(port)	(0)
 #endif
 
 /*
@@ -109,15 +73,13 @@ codec_port(unsigned long port)
 unsigned char hs7751rvoip_inb(unsigned long port)
 {
 	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		return ctrl_inb(port);
 	else if (codec_port(port))
-		return *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+		return ctrl_inb(CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inb(pci_ioaddr(port));
 	else
-		return (*(volatile unsigned short *)port2adr(port) & 0xff);
+		return ctrl_inw(port2adr(port)) & 0xff;
 }
 
 unsigned char hs7751rvoip_inb_p(unsigned long port)
@@ -125,38 +87,36 @@ unsigned char hs7751rvoip_inb_p(unsigned long port)
 	unsigned char v;
 
         if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		v = ctrl_inb(port);
 	else if (codec_port(port))
-		v = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-                v = *(volatile unsigned char *)PCI_IOMAP(port);
+		v = ctrl_inb(CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		v = ctrl_inb(pci_ioaddr(port));
 	else
-		v = (*(volatile unsigned short *)port2adr(port) & 0xff);
-	delay();
+		v = ctrl_inw(port2adr(port)) & 0xff;
+	ctrl_delay();
 	return v;
 }
 
 unsigned short hs7751rvoip_inw(unsigned long port)
 {
         if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-                return *(volatile unsigned short *)PCI_IOMAP(port);
+		return ctrl_inw(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inw(pci_ioaddr(port));
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
 unsigned int hs7751rvoip_inl(unsigned long port)
 {
         if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-                return *(volatile unsigned long *)PCI_IOMAP(port);
+		return ctrl_inl(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inl(pci_ioaddr(port));
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -164,146 +124,160 @@ void hs7751rvoip_outb(unsigned char value, unsigned long port)
 {
 
         if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		ctrl_outb(value, port);
 	else if (codec_port(port))
-		*(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value;
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-        	*(unsigned char *)PCI_IOMAP(port) = value;
+		ctrl_outb(value, CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outb(value, pci_ioaddr(port));
 	else
-		*(volatile unsigned short *)port2adr(port) = value;
+		ctrl_outb(value, port2adr(port));
 }
 
 void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		ctrl_outb(value, port);
 	else if (codec_port(port))
-		*(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value;
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-        	*(unsigned char *)PCI_IOMAP(port) = value;
+		ctrl_outb(value, CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outb(value, pci_ioaddr(port));
 	else
-		*(volatile unsigned short *)port2adr(port) = value;
-	delay();
+		ctrl_outw(value, port2adr(port));
+
+	ctrl_delay();
 }
 
 void hs7751rvoip_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-        	*(unsigned short *)PCI_IOMAP(port) = value;
+		ctrl_outw(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outw(value, pci_ioaddr(port));
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void hs7751rvoip_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-        	*((unsigned long *)PCI_IOMAP(port)) = value;
+		ctrl_outl(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outl(value, pci_ioaddr(port));
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
 {
+	u8 *buf = addr;
+
 	if (PXSEG(port))
-		while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		while (count--)
+			*buf++ = ctrl_inb(port);
 	else if (codec_port(port))
-		while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u8 *bp = (__u8 *)PCI_IOMAP(port);
+		while (count--)
+			*buf++ = ctrl_inb(CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
 
-		while (count--) *((volatile unsigned char *) addr)++ = *bp;
+		while (count--)
+			*buf++ = *bp;
 	} else {
-		volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+		volatile u16 *p = (volatile u16 *)port2adr(port);
 
-		while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+		while (count--)
+			*buf++ = *p & 0xff;
 	}
 }
 
 void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
 {
-	volatile __u16 *p;
+	volatile u16 *p;
+	u16 *buf = addr;
 
 	if (PXSEG(port))
-		p = (volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		p = (volatile unsigned short *)PCI_IOMAP(port);
+		p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile u16 *)pci_ioaddr(port);
 	else
-		p = (volatile unsigned short *)port2adr(port);
-	while (count--) *((__u16 *) addr)++ = *p;
+		p = (volatile u16 *)port2adr(port);
+	while (count--)
+		*buf++ = *p;
 }
 
 void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
 {
-	if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
 
-		while (count--) *((__u32 *) addr)++ = *p;
+	if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+		u32 *buf = addr;
+
+		while (count--)
+			*buf++ = *p;
 	} else
-		maybebadio(insl, port);
+		maybebadio(port);
 }
 
 void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
 {
+	const u8 *buf = addr;
+
 	if (PXSEG(port))
-		while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+		while (count--)
+			ctrl_outb(*buf++, port);
 	else if (codec_port(port))
-		while (count--) *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = *((unsigned char *) addr)++;
-#endif
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u8 *bp = (__u8 *)PCI_IOMAP(port);
+		while (count--)
+			ctrl_outb(*buf++, CODEC_IOMAP(port));
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
 
-		while (count--) *bp = *((volatile unsigned char *) addr)++;
+		while (count--)
+			*bp = *buf++;
 	} else {
-		volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+		volatile u16 *p = (volatile u16 *)port2adr(port);
 
-		while (count--) *p = *((unsigned char *) addr)++;
+		while (count--)
+			*p = *buf++;
 	}
 }
 
 void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
 {
-	volatile __u16 *p;
+	volatile u16 *p;
+	const u16 *buf = addr;
 
 	if (PXSEG(port))
-		p = (volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		p = (volatile unsigned short *)PCI_IOMAP(port);
+		p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile u16 *)pci_ioaddr(port);
 	else
-		p = (volatile unsigned short *)port2adr(port);
-	while (count--) *p = *((__u16 *) addr)++;
+		p = (volatile u16 *)port2adr(port);
+
+	while (count--)
+		*p = *buf++;
 }
 
 void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+	const u32 *buf = addr;
 
-		while (count--) *p = *((__u32 *) addr)++;
+	if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+		while (count--)
+			*p = *buf++;
 	} else
-		maybebadio(outsl, port);
+		maybebadio(port);
 }
 
-void *hs7751rvoip_ioremap(unsigned long offset, unsigned long size)
+void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
 {
-	if (offset >= 0xfd000000)
-		return (void *)offset;
-	else
-		return (void *)P2SEGADDR(offset);
-}
-EXPORT_SYMBOL(hs7751rvoip_ioremap);
+        if (PXSEG(port))
+                return (void __iomem *)port;
+	else if (unlikely(codec_port(port) && (size == 1)))
+		return (void __iomem *)CODEC_IOMAP(port);
+        else if (is_pci_ioaddr(port))
+                return (void __iomem *)pci_ioaddr(port);
 
-unsigned long hs7751rvoip_isa_port2addr(unsigned long offset)
-{
-	return port2adr(offset);
+        return (void __iomem *)port2adr(port);
 }
diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c
index 705b7ddcb0d..c617b188258 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/irq.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c
@@ -35,30 +35,24 @@ static unsigned int startup_hs7751rvoip_irq(unsigned int irq)
 
 static void disable_hs7751rvoip_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short val;
 	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
 
 	/* Set the priority in IPR to 0 */
-	local_irq_save(flags);
 	val = ctrl_inw(IRLCNTR3);
 	val &= mask;
 	ctrl_outw(val, IRLCNTR3);
-	local_irq_restore(flags);
 }
 
 static void enable_hs7751rvoip_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short val;
 	unsigned short value = (0x0001 << mask_pos[irq]);
 
 	/* Set priority in IPR back to original value */
-	local_irq_save(flags);
 	val = ctrl_inw(IRLCNTR3);
 	val |= value;
 	ctrl_outw(val, IRLCNTR3);
-	local_irq_restore(flags);
 }
 
 static void ack_hs7751rvoip_irq(unsigned int irq)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/led.c b/arch/sh/boards/renesas/hs7751rvoip/led.c
deleted file mode 100644
index b6608fff9f3..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/led.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/sh/kernel/setup_hs7751rvoip.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-
-#include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
-extern unsigned int debug_counter;
-
-void debug_led_disp(void)
-{
-	unsigned short value;
-
-	value = (unsigned char)debug_counter++;
-	ctrl_outb((0xf0|value), PA_OUTPORTR);
-	if (value == 0x0f)
-		debug_counter = 0;
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/mach.c b/arch/sh/boards/renesas/hs7751rvoip/mach.c
deleted file mode 100644
index caf967f77c6..00000000000
--- a/arch/sh/boards/renesas/hs7751rvoip/mach.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_hs7751rvoip.c
- *
- * Minor tweak of mach_se.c file to reference hs7751rvoip-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the Renesas Technology sales HS7751RVoIP
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
-#include <asm/hs7751rvoip/io.h>
-
-extern void init_hs7751rvoip_IRQ(void);
-extern void *hs7751rvoip_ioremap(unsigned long, unsigned long);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= hs7751rvoip_inb,
-	.mv_inw			= hs7751rvoip_inw,
-	.mv_inl			= hs7751rvoip_inl,
-	.mv_outb		= hs7751rvoip_outb,
-	.mv_outw		= hs7751rvoip_outw,
-	.mv_outl		= hs7751rvoip_outl,
-
-	.mv_inb_p		= hs7751rvoip_inb_p,
-	.mv_inw_p		= hs7751rvoip_inw,
-	.mv_inl_p		= hs7751rvoip_inl,
-	.mv_outb_p		= hs7751rvoip_outb_p,
-	.mv_outw_p		= hs7751rvoip_outw,
-	.mv_outl_p		= hs7751rvoip_outl,
-
-	.mv_insb		= hs7751rvoip_insb,
-	.mv_insw		= hs7751rvoip_insw,
-	.mv_insl		= hs7751rvoip_insl,
-	.mv_outsb		= hs7751rvoip_outsb,
-	.mv_outsw		= hs7751rvoip_outsw,
-	.mv_outsl		= hs7751rvoip_outsl,
-
-	.mv_ioremap		= hs7751rvoip_ioremap,
-	.mv_isa_port2addr	= hs7751rvoip_isa_port2addr,
-	.mv_init_irq		= init_hs7751rvoip_IRQ,
-};
-ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
index 29fb5ff70fb..0414c15c345 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c
@@ -1,44 +1,38 @@
 /*
- * linux/arch/sh/kernel/setup_hs7751rvoip.c
+ * Renesas Technology Sales HS7751RVoIP Support.
  *
  * Copyright (C) 2000  Kazumoto Kojima
  *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
  * Modified for HS7751RVoIP by
  * Atom Create Engineering Co., Ltd. 2002.
  * Lineo uSolutions, Inc. 2003.
  */
-
 #include <linux/init.h>
 #include <linux/irq.h>
-
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
+#include <linux/pm.h>
 #include <asm/io.h>
 #include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/irq.h>
 
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-
-/* defined in mm/ioremap.c */
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-
-unsigned int debug_counter;
-
-const char *get_system_type(void)
+static void __init hs7751rvoip_init_irq(void)
 {
-	return "HS7751RVoIP";
+#if defined(CONFIG_HS7751RVOIP_CODEC)
+	make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+	make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+#endif
+
+	init_hs7751rvoip_IRQ();
 }
 
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
+static void hs7751rvoip_power_off(void)
 {
-	printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
-	ctrl_outb(0xf0, PA_OUTPORTR);
-	debug_counter = 0;
+	ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
 }
 
 void *area5_io8_base;
@@ -46,16 +40,15 @@ void *area6_io8_base;
 void *area5_io16_base;
 void *area6_io16_base;
 
-int __init cf_init(void)
+static int __init hs7751rvoip_cf_init(void)
 {
 	pgprot_t prot;
-	unsigned long paddrbase, psize;
+	unsigned long paddrbase;
 
 	/* open I/O area window */
 	paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
-	psize = PAGE_SIZE;
 	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
-	area5_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+	area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
 	if (!area5_io16_base) {
 		printk("allocate_cf_area : can't open CF I/O window!\n");
 		return -ENOMEM;
@@ -64,19 +57,18 @@ int __init cf_init(void)
 	/* XXX : do we need attribute and common-memory area also? */
 
 	paddrbase = virt_to_phys((void *)PA_AREA6_IO);
-	psize = PAGE_SIZE;
 #if defined(CONFIG_HS7751RVOIP_CODEC)
 	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
 #else
 	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
 #endif
-	area6_io8_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+	area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
 	if (!area6_io8_base) {
 		printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
 		return -ENOMEM;
 	}
 	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
-	area6_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+	area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
 	if (!area6_io16_base) {
 		printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
 		return -ENOMEM;
@@ -85,4 +77,46 @@ int __init cf_init(void)
 	return 0;
 }
 
-__initcall (cf_init);
+/*
+ * Initialize the board
+ */
+static void __init hs7751rvoip_setup(char **cmdline_p)
+{
+	device_initcall(hs7751rvoip_cf_init);
+
+	ctrl_outb(0xf0, PA_OUTPORTR);
+	pm_power_off = hs7751rvoip_power_off;
+
+	printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
+}
+
+struct sh_machine_vector mv_hs7751rvoip __initmv = {
+	.mv_name		= "HS7751RVoIP",
+	.mv_setup		= hs7751rvoip_setup,
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= hs7751rvoip_inb,
+	.mv_inw			= hs7751rvoip_inw,
+	.mv_inl			= hs7751rvoip_inl,
+	.mv_outb		= hs7751rvoip_outb,
+	.mv_outw		= hs7751rvoip_outw,
+	.mv_outl		= hs7751rvoip_outl,
+
+	.mv_inb_p		= hs7751rvoip_inb_p,
+	.mv_inw_p		= hs7751rvoip_inw,
+	.mv_inl_p		= hs7751rvoip_inl,
+	.mv_outb_p		= hs7751rvoip_outb_p,
+	.mv_outw_p		= hs7751rvoip_outw,
+	.mv_outl_p		= hs7751rvoip_outl,
+
+	.mv_insb		= hs7751rvoip_insb,
+	.mv_insw		= hs7751rvoip_insw,
+	.mv_insl		= hs7751rvoip_insl,
+	.mv_outsb		= hs7751rvoip_outsb,
+	.mv_outsw		= hs7751rvoip_outsw,
+	.mv_outsl		= hs7751rvoip_outsl,
+
+	.mv_init_irq		= hs7751rvoip_init_irq,
+	.mv_ioport_map		= hs7751rvoip_ioport_map,
+};
+ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
new file mode 100644
index 00000000000..c26d9813d23
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -0,0 +1,14 @@
+if SH_R7780RP
+
+menu "R7780RP options"
+
+config SH_R7780MP
+	bool "R7780MP board support"
+	default y
+	help
+	  Selecting this option will enable support for the mass-production
+	  version of the R7780RP. If in doubt, say Y.
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
new file mode 100644
index 00000000000..f1776d02797
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the R7780RP-1 specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT)	+= led.o
diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c
new file mode 100644
index 00000000000..db92d6e6ae9
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/io.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Renesas Solutions Highlander R7780RP-1
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_r7780rp.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+static inline unsigned long port2adr(unsigned int port)
+{
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		if (port == 0x3f6)
+			return (PA_AREA5_IO + 0x80c);
+		else
+			return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
+	else
+		maybebadio((unsigned long)port);
+
+	return port;
+}
+
+static inline unsigned long port88796l(unsigned int port, int flag)
+{
+	unsigned long addr;
+
+	if (flag)
+		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
+	else
+		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
+
+	return addr;
+}
+
+/* The 7780 R7780RP-1 seems to have everything hooked */
+/* up pretty normally (nothing on high-bytes only...) so this */
+/* shouldn't be needed */
+static inline int shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
+#define CHECK_AX88796L_PORT(port) \
+  ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
+#else
+#define CHECK_AX88796L_PORT(port) (0)
+#endif
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+u8 r7780rp_inb(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		return ctrl_inw(port88796l(port, 0)) & 0xff;
+	else if (PXSEG(port))
+		return ctrl_inb(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inb(pci_ioaddr(port));
+
+	return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 r7780rp_inb_p(unsigned long port)
+{
+	u8 v;
+
+	if (CHECK_AX88796L_PORT(port))
+		v = ctrl_inw(port88796l(port, 0)) & 0xff;
+	else if (PXSEG(port))
+		v = ctrl_inb(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		v = ctrl_inb(pci_ioaddr(port));
+	else
+		v = ctrl_inw(port2adr(port)) & 0xff;
+
+	ctrl_delay();
+
+	return v;
+}
+
+u16 r7780rp_inw(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		return ctrl_inw(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inw(pci_ioaddr(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+u32 r7780rp_inl(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		return ctrl_inl(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return ctrl_inl(pci_ioaddr(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+void r7780rp_outb(u8 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		ctrl_outw(value, port88796l(port, 0));
+	else if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outb(value, pci_ioaddr(port));
+	else
+		ctrl_outw(value, port2adr(port));
+}
+
+void r7780rp_outb_p(u8 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		ctrl_outw(value, port88796l(port, 0));
+	else if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outb(value, pci_ioaddr(port));
+	else
+		ctrl_outw(value, port2adr(port));
+
+	ctrl_delay();
+}
+
+void r7780rp_outw(u16 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		ctrl_outw(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outw(value, pci_ioaddr(port));
+	else
+		maybebadio(port);
+}
+
+void r7780rp_outl(u32 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		ctrl_outl(value, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		ctrl_outl(value, pci_ioaddr(port));
+	else
+		maybebadio(port);
+}
+
+void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
+{
+	volatile u16 *p;
+	u8 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port)) {
+		p = (volatile u16 *)port88796l(port, 0);
+		while (count--)
+			*buf++ = *p & 0xff;
+	} else if (PXSEG(port)) {
+		while (count--)
+			*buf++ = *(volatile u8 *)port;
+	} else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+		while (count--)
+			*buf++ = *bp;
+	} else {
+		p = (volatile u16 *)port2adr(port);
+		while (count--)
+			*buf++ = *p & 0xff;
+	}
+}
+
+void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
+{
+	volatile u16 *p;
+	u16 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port))
+		p = (volatile u16 *)port88796l(port, 1);
+	else if (PXSEG(port))
+		p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile u16 *)pci_ioaddr(port);
+	else
+		p = (volatile u16 *)port2adr(port);
+
+	while (count--)
+		*buf++ = *p;
+}
+
+void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
+{
+	u32 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+		while (count--)
+			*buf++ = *p;
+	} else
+		maybebadio(port);
+}
+
+void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
+{
+	volatile u16 *p;
+	const u8 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port)) {
+		p = (volatile u16 *)port88796l(port, 0);
+		while (count--)
+			*p = *buf++;
+	} else if (PXSEG(port))
+		while (count--)
+			ctrl_outb(*buf++, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+		while (count--)
+			*bp = *buf++;
+	} else {
+		p = (volatile u16 *)port2adr(port);
+		while (count--)
+			*p = *buf++;
+	}
+}
+
+void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
+{
+	volatile u16 *p;
+	const u16 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port))
+		p = (volatile u16 *)port88796l(port, 1);
+	else if (PXSEG(port))
+		p = (volatile u16 *)port;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile u16 *)pci_ioaddr(port);
+	else
+		p = (volatile u16 *)port2adr(port);
+
+	while (count--)
+		*p = *buf++;
+}
+
+void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
+{
+	const u32 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+		while (count--)
+			*p = *buf++;
+	} else
+		maybebadio(port);
+}
+
+void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
+{
+	if (CHECK_AX88796L_PORT(port))
+		return (void __iomem *)port88796l(port, size > 1);
+	else if (PXSEG(port))
+		return (void __iomem *)port;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return (void __iomem *)pci_ioaddr(port);
+
+	return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
new file mode 100644
index 00000000000..61d5e5d3c29
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/sh/boards/renesas/r7780rp/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Modified for R7780RP-1 by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/r7780rp/r7780rp.h>
+
+#ifdef CONFIG_SH_R7780MP
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#else
+static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#endif
+
+static void enable_r7780rp_irq(unsigned int irq);
+static void disable_r7780rp_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_r7780rp_irq disable_r7780rp_irq
+
+static void ack_r7780rp_irq(unsigned int irq);
+static void end_r7780rp_irq(unsigned int irq);
+
+static unsigned int startup_r7780rp_irq(unsigned int irq)
+{
+	enable_r7780rp_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void disable_r7780rp_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inw(IRLCNTR1);
+	val &= mask;
+	ctrl_outw(val, IRLCNTR1);
+}
+
+static void enable_r7780rp_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short value = (0x0001 << mask_pos[irq]);
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inw(IRLCNTR1);
+	val |= value;
+	ctrl_outw(val, IRLCNTR1);
+}
+
+static void ack_r7780rp_irq(unsigned int irq)
+{
+	disable_r7780rp_irq(irq);
+}
+
+static void end_r7780rp_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_r7780rp_irq(irq);
+}
+
+static struct hw_interrupt_type r7780rp_irq_type = {
+	.typename = "R7780RP-IRQ",
+	.startup = startup_r7780rp_irq,
+	.shutdown = shutdown_r7780rp_irq,
+	.enable = enable_r7780rp_irq,
+	.disable = disable_r7780rp_irq,
+	.ack = ack_r7780rp_irq,
+	.end = end_r7780rp_irq,
+};
+
+static void make_r7780rp_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &r7780rp_irq_type;
+	disable_r7780rp_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_r7780rp_IRQ(void)
+{
+	int i;
+
+	/* IRL0=PCI Slot #A
+	 * IRL1=PCI Slot #B
+	 * IRL2=PCI Slot #C
+	 * IRL3=PCI Slot #D
+	 * IRL4=CF Card
+	 * IRL5=CF Card Insert
+	 * IRL6=M66596
+	 * IRL7=SD Card
+	 * IRL8=Touch Panel
+	 * IRL9=SCI
+	 * IRL10=Serial
+	 * IRL11=Extention #A
+	 * IRL11=Extention #B
+	 * IRL12=Debug LAN
+	 * IRL13=Push Switch
+	 * IRL14=ZiggBee IO
+	 */
+
+	for (i=0; i<15; i++)
+		make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c
new file mode 100644
index 00000000000..9f02766b6f5
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/led.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) Atom Create Engineering Co., Ltd.
+ *
+ * May be copied or modified under the terms of GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <asm/r7780rp/r7780rp.h>
+
+/* Cycle the LED's in the clasic Knightriger/Sun pattern */
+void heartbeat_r7780rp(void)
+{
+	static unsigned int cnt = 0, period = 0;
+	volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
+	static unsigned bit = 0, up = 1;
+	unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
+
+	cnt += 1;
+	if (cnt < period)
+		return;
+
+	cnt = 0;
+
+	/* Go through the points (roughly!):
+	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
+	 */
+	period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
+
+	*p = 1 << bit_pos[bit];
+	if (up)
+		if (bit == 7) {
+			bit--;
+			up = 0;
+		} else
+			bit++;
+	else if (bit == 0)
+		up = 1;
+	else
+		bit--;
+}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
new file mode 100644
index 00000000000..b941aa0aa34
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -0,0 +1,163 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/setup.c
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005, 2006 Paul Mundt
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+extern void heartbeat_r7780rp(void);
+extern void init_r7780rp_IRQ(void);
+
+static struct resource m66596_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xa4800000,
+		.end	= 0xa4ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 6,		/* irq number */
+		.end	= 6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66596_usb_host_device = {
+	.name		= "m66596-hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(m66596_usb_host_resources),
+	.resource	= m66596_usb_host_resources,
+};
+
+static struct platform_device *r7780rp_devices[] __initdata = {
+	&m66596_usb_host_device,
+};
+
+static int __init r7780rp_devices_setup(void)
+{
+	return platform_add_devices(r7780rp_devices,
+				    ARRAY_SIZE(r7780rp_devices));
+}
+
+/*
+ * Platform specific clocks
+ */
+static void ivdr_clk_enable(struct clk *clk)
+{
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL);
+}
+
+static void ivdr_clk_disable(struct clk *clk)
+{
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL);
+}
+
+static struct clk_ops ivdr_clk_ops = {
+	.enable		= ivdr_clk_enable,
+	.disable	= ivdr_clk_disable,
+};
+
+static struct clk ivdr_clk = {
+	.name		= "ivdr_clk",
+	.ops		= &ivdr_clk_ops,
+};
+
+static struct clk *r7780rp_clocks[] = {
+	&ivdr_clk,
+};
+
+static void r7780rp_power_off(void)
+{
+#ifdef CONFIG_SH_R7780MP
+	ctrl_outw(0x0001, PA_POFF);
+#endif
+}
+
+/*
+ * Initialize the board
+ */
+static void __init r7780rp_setup(char **cmdline_p)
+{
+	u16 ver = ctrl_inw(PA_VERREG);
+	int i;
+
+	device_initcall(r7780rp_devices_setup);
+
+	printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d)\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf);
+
+	/*
+	 * Enable the important clocks right away..
+	 */
+	for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
+		struct clk *clk = r7780rp_clocks[i];
+
+		clk_register(clk);
+		clk_enable(clk);
+	}
+
+	ctrl_outw(0x0000, PA_OBLED);	/* Clear LED. */
+#ifndef CONFIG_SH_R7780MP
+	ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
+#endif
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL);	/* Si13112 */
+
+	pm_power_off = r7780rp_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_r7780rp __initmv = {
+	.mv_name		= "Highlander R7780RP-1",
+	.mv_setup		= r7780rp_setup,
+
+	.mv_nr_irqs		= 109,
+
+	.mv_inb			= r7780rp_inb,
+	.mv_inw			= r7780rp_inw,
+	.mv_inl			= r7780rp_inl,
+	.mv_outb		= r7780rp_outb,
+	.mv_outw		= r7780rp_outw,
+	.mv_outl		= r7780rp_outl,
+
+	.mv_inb_p		= r7780rp_inb_p,
+	.mv_inw_p		= r7780rp_inw,
+	.mv_inl_p		= r7780rp_inl,
+	.mv_outb_p		= r7780rp_outb_p,
+	.mv_outw_p		= r7780rp_outw,
+	.mv_outl_p		= r7780rp_outl,
+
+	.mv_insb		= r7780rp_insb,
+	.mv_insw		= r7780rp_insw,
+	.mv_insl		= r7780rp_insl,
+	.mv_outsb		= r7780rp_outsb,
+	.mv_outsw		= r7780rp_outsw,
+	.mv_outsl		= r7780rp_outsl,
+
+	.mv_ioport_map		= r7780rp_ioport_map,
+	.mv_init_irq		= init_r7780rp_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_r7780rp,
+#endif
+};
+ALIAS_MV(r7780rp)
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig
new file mode 100644
index 00000000000..7780d1fb13f
--- /dev/null
+++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig
@@ -0,0 +1,12 @@
+if SH_RTS7751R2D
+
+menu "RTS7751R2D options"
+
+config RTS7751R2D_REV11
+	bool "RTS7751R2D Rev. 1.1 board support"
+	help
+	  Selecting this option will support version rev. 1.1.
+endmenu
+
+endif
+
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile
index daa53334bdc..686fc9ea598 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/renesas/rts7751r2d/Makefile
@@ -1,10 +1,6 @@
 #
 # Makefile for the RTS7751R2D specific parts of the kernel
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y	 := mach.o setup.o io.o irq.o led.o
 
+obj-y	 := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c
index 123abbbc91e..135aa0b5e62 100644
--- a/arch/sh/boards/renesas/rts7751r2d/io.c
+++ b/arch/sh/boards/renesas/rts7751r2d/io.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/sh/kernel/io_rts7751r2d.c
- *
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
  *
@@ -10,17 +8,13 @@
  * placeholder code from io_rts7751r2d.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/io.h>
+#include <linux/pci.h>
 #include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/io.h>
 #include <asm/addrspace.h>
 
-#include <linux/module.h>
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
 /*
  * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC)
  * of the 7751R processor, and has a SuperIO accessible via the PCI.
@@ -28,22 +22,6 @@
  * like the other Solution Engine boards.
  */
 
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 static inline unsigned long port2adr(unsigned int port)
 {
 	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
@@ -52,7 +30,7 @@ static inline unsigned long port2adr(unsigned int port)
 		else
 			return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
 	else
-		maybebadio(port2adr, (unsigned long)port);
+		maybebadio((unsigned long)port);
 
 	return port;
 }
@@ -81,17 +59,6 @@ static inline int shifted_port(unsigned long port)
 		return 1;
 }
 
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
 #define CHECK_AX88796L_PORT(port) \
   ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
@@ -112,8 +79,8 @@ unsigned char rts7751r2d_inb(unsigned long port)
 		return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
 	else if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		return (*(volatile unsigned short *)port2adr(port) & 0xff);
 }
@@ -126,11 +93,12 @@ unsigned char rts7751r2d_inb_p(unsigned long port)
 		v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
         else if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		v = (*(volatile unsigned short *)port2adr(port) & 0xff);
-	delay();
+
+	ctrl_delay();
 
 	return v;
 }
@@ -138,13 +106,13 @@ unsigned char rts7751r2d_inb_p(unsigned long port)
 unsigned short rts7751r2d_inw(unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(inw, port);
+		maybebadio(port);
         else if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return *(volatile unsigned short *)pci_ioaddr(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 
 	return 0;
 }
@@ -152,13 +120,13 @@ unsigned short rts7751r2d_inw(unsigned long port)
 unsigned int rts7751r2d_inl(unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(inl, port);
+		maybebadio(port);
         else if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		return *(volatile unsigned long *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		return *(volatile unsigned long *)pci_ioaddr(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 
 	return 0;
 }
@@ -169,8 +137,8 @@ void rts7751r2d_outb(unsigned char value, unsigned long port)
 		*((volatile unsigned short *)port88796l(port, 0)) = value;
         else if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		*(volatile unsigned char *)PCI_IOMAP(port) = value;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		*(volatile unsigned char *)pci_ioaddr(port) = value;
 	else
 		*(volatile unsigned short *)port2adr(port) = value;
 }
@@ -181,143 +149,152 @@ void rts7751r2d_outb_p(unsigned char value, unsigned long port)
 		*((volatile unsigned short *)port88796l(port, 0)) = value;
         else if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		*(volatile unsigned char *)PCI_IOMAP(port) = value;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		*(volatile unsigned char *)pci_ioaddr(port) = value;
 	else
 		*(volatile unsigned short *)port2adr(port) = value;
-	delay();
+
+	ctrl_delay();
 }
 
 void rts7751r2d_outw(unsigned short value, unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(outw, port);
+		maybebadio(port);
         else if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		*(volatile unsigned short *)PCI_IOMAP(port) = value;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		*(volatile unsigned short *)pci_ioaddr(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void rts7751r2d_outl(unsigned int value, unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(outl, port);
+		maybebadio(port);
         else if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		*(volatile unsigned long *)PCI_IOMAP(port) = value;
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		*(volatile unsigned long *)pci_ioaddr(port) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count)
 {
+	unsigned long a = (unsigned long)addr;
 	volatile __u8 *bp;
 	volatile __u16 *p;
-	unsigned char *s = addr;
 
 	if (CHECK_AX88796L_PORT(port)) {
 		p = (volatile unsigned short *)port88796l(port, 0);
-		while (count--) *s++ = *p & 0xff;
+		while (count--)
+			ctrl_outb(*p & 0xff, a++);
 	} else if (PXSEG(port))
-		while (count--) *s++ = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		bp = (__u8 *)PCI_IOMAP(port);
-		while (count--) *s++ = *bp;
+		while (count--)
+			ctrl_outb(ctrl_inb(port), a++);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		bp = (__u8 *)pci_ioaddr(port);
+		while (count--)
+			ctrl_outb(*bp, a++);
 	} else {
 		p = (volatile unsigned short *)port2adr(port);
-		while (count--) *s++ = *p & 0xff;
+		while (count--)
+			ctrl_outb(*p & 0xff, a++);
 	}
 }
 
 void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
 {
+	unsigned long a = (unsigned long)addr;
 	volatile __u16 *p;
-	__u16 *s = addr;
 
 	if (CHECK_AX88796L_PORT(port))
 		p = (volatile unsigned short *)port88796l(port, 1);
 	else if (PXSEG(port))
 		p = (volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		p = (volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile unsigned short *)pci_ioaddr(port);
 	else
 		p = (volatile unsigned short *)port2adr(port);
-	while (count--) *s++ = *p;
+	while (count--)
+		ctrl_outw(*p, a++);
 }
 
 void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(insl, port);
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
-		__u32 *s = addr;
-
-		while (count--) *s++ = *p;
+		maybebadio(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		unsigned long a = (unsigned long)addr;
+
+		while (count--) {
+			ctrl_outl(ctrl_inl(pci_ioaddr(port)), a);
+			a += 4;
+		}
 	} else
-		maybebadio(insl, port);
+		maybebadio(port);
 }
 
 void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count)
 {
+	unsigned long a = (unsigned long)addr;
 	volatile __u8 *bp;
 	volatile __u16 *p;
-	const __u8 *s = addr;
 
 	if (CHECK_AX88796L_PORT(port)) {
 		p = (volatile unsigned short *)port88796l(port, 0);
-		while (count--) *p = *s++;
+		while (count--)
+			*p = ctrl_inb(a++);
 	} else if (PXSEG(port))
-		while (count--) *(volatile unsigned char *)port = *s++;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		bp = (__u8 *)PCI_IOMAP(port);
-		while (count--) *bp = *s++;
+		while (count--)
+			ctrl_outb(a++, port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		bp = (__u8 *)pci_ioaddr(port);
+		while (count--)
+			*bp = ctrl_inb(a++);
 	} else {
 		p = (volatile unsigned short *)port2adr(port);
-		while (count--) *p = *s++;
+		while (count--)
+			*p = ctrl_inb(a++);
 	}
 }
 
 void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
 {
+	unsigned long a = (unsigned long)addr;
 	volatile __u16 *p;
-	const __u16 *s = addr;
 
 	if (CHECK_AX88796L_PORT(port))
 		p = (volatile unsigned short *)port88796l(port, 1);
 	else if (PXSEG(port))
 		p = (volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
-		p = (volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port))
+		p = (volatile unsigned short *)pci_ioaddr(port);
 	else
 		p = (volatile unsigned short *)port2adr(port);
-	while (count--) *p = *s++;
+
+	while (count--) {
+		ctrl_outw(*p, a);
+		a += 2;
+	}
 }
 
 void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
 {
 	if (CHECK_AX88796L_PORT(port))
-		maybebadio(outsl, port);
-	else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
-		volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
-		const __u32 *s = addr;
-
-		while (count--) *p = *s++;
+		maybebadio(port);
+	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+		unsigned long a = (unsigned long)addr;
+
+		while (count--) {
+			ctrl_outl(ctrl_inl(a), pci_ioaddr(port));
+			a += 4;
+		}
 	} else
-		maybebadio(outsl, port);
-}
-
-void *rts7751r2d_ioremap(unsigned long offset, unsigned long size)
-{
-	if (offset >= 0xfd000000)
-		return (void *)offset;
-	else
-		return (void *)P2SEGADDR(offset);
+		maybebadio(port);
 }
-EXPORT_SYMBOL(rts7751r2d_ioremap);
 
 unsigned long rts7751r2d_isa_port2addr(unsigned long offset)
 {
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c
index 154535440bb..c915e7a3693 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/renesas/rts7751r2d/irq.c
@@ -41,30 +41,24 @@ static unsigned int startup_rts7751r2d_irq(unsigned int irq)
 
 static void disable_rts7751r2d_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short val;
 	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
 
 	/* Set the priority in IPR to 0 */
-	local_irq_save(flags);
 	val = ctrl_inw(IRLCNTR1);
 	val &= mask;
 	ctrl_outw(val, IRLCNTR1);
-	local_irq_restore(flags);
 }
 
 static void enable_rts7751r2d_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short val;
 	unsigned short value = (0x0001 << mask_pos[irq]);
 
 	/* Set priority in IPR back to original value */
-	local_irq_save(flags);
 	val = ctrl_inw(IRLCNTR1);
 	val |= value;
 	ctrl_outw(val, IRLCNTR1);
-	local_irq_restore(flags);
 }
 
 int rts7751r2d_irq_demux(int irq)
diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c
index 4d16de71fac..e14a13d12d4 100644
--- a/arch/sh/boards/renesas/rts7751r2d/led.c
+++ b/arch/sh/boards/renesas/rts7751r2d/led.c
@@ -12,8 +12,6 @@
 #include <asm/io.h>
 #include <asm/rts7751r2d/rts7751r2d.h>
 
-extern unsigned int debug_counter;
-
 #ifdef CONFIG_HEARTBEAT
 
 #include <linux/sched.h>
@@ -55,12 +53,3 @@ void rts7751r2d_led(unsigned short value)
 	ctrl_outw(value, PA_OUTPORT);
 }
 
-void debug_led_disp(void)
-{
-	unsigned short value;
-
-	value = (unsigned short)debug_counter++;
-	rts7751r2d_led(value);
-	if (value == 0xff)
-		debug_counter = 0;
-}
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
deleted file mode 100644
index 5ed9e97ea19..00000000000
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_rts7751r2d.c
- *
- * Minor tweak of mach_se.c file to reference rts7751r2d-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the Renesas Technology sales RTS7751R2D
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
-#include <asm/rts7751r2d/io.h>
-
-extern void heartbeat_rts7751r2d(void);
-extern void init_rts7751r2d_IRQ(void);
-extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
-extern int rts7751r2d_irq_demux(int irq);
-
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
-extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_rts7751r2d __initmv = {
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= rts7751r2d_inb,
-	.mv_inw			= rts7751r2d_inw,
-	.mv_inl			= rts7751r2d_inl,
-	.mv_outb		= rts7751r2d_outb,
-	.mv_outw		= rts7751r2d_outw,
-	.mv_outl		= rts7751r2d_outl,
-
-	.mv_inb_p		= rts7751r2d_inb_p,
-	.mv_inw_p		= rts7751r2d_inw,
-	.mv_inl_p		= rts7751r2d_inl,
-	.mv_outb_p		= rts7751r2d_outb_p,
-	.mv_outw_p		= rts7751r2d_outw,
-	.mv_outl_p		= rts7751r2d_outl,
-
-	.mv_insb		= rts7751r2d_insb,
-	.mv_insw		= rts7751r2d_insw,
-	.mv_insl		= rts7751r2d_insl,
-	.mv_outsb		= rts7751r2d_outsb,
-	.mv_outsw		= rts7751r2d_outsw,
-	.mv_outsl		= rts7751r2d_outsl,
-
-	.mv_ioremap		= rts7751r2d_ioremap,
-	.mv_isa_port2addr	= rts7751r2d_isa_port2addr,
-	.mv_init_irq		= init_rts7751r2d_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_rts7751r2d,
-#endif
-	.mv_irq_demux		= rts7751r2d_irq_demux,
-
-#ifdef CONFIG_USB_OHCI_HCD
-	.mv_consistent_alloc	= voyagergx_consistent_alloc,
-	.mv_consistent_free	= voyagergx_consistent_free,
-#endif
-};
-ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 2587fd1a024..20597a6e670 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -1,31 +1,142 @@
 /*
- * linux/arch/sh/kernel/setup_rts7751r2d.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
  * Renesas Technology Sales RTS7751R2D Support.
  *
- * Modified for RTS7751R2D by
- * Atom Create Engineering Co., Ltd. 2002.
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2004 - 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
 #include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
 #include <asm/io.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/machvec.h>
+#include <asm/mach/rts7751r2d.h>
+#include <asm/voyagergx.h>
+
+extern void heartbeat_rts7751r2d(void);
+extern void init_rts7751r2d_IRQ(void);
+extern int rts7751r2d_irq_demux(int irq);
+
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
+extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
+
+static struct plat_serial8250_port uart_platform_data[] = {
+	{
+		.membase	= (void *)VOYAGER_UART_BASE,
+		.mapbase	= VOYAGER_UART_BASE,
+		.iotype		= UPIO_MEM,
+		.irq		= VOYAGER_UART0_IRQ,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.regshift	= 2,
+		.uartclk	= (9600 * 16),
+	}, {
+		.flags		= 0,
+	},
+};
+
+static void __init voyagergx_serial_init(void)
+{
+	unsigned long val;
+
+	/*
+	 * GPIO Control
+	 */
+	val = inl(GPIO_MUX_HIGH);
+	val |= 0x00001fe0;
+	outl(val, GPIO_MUX_HIGH);
+
+	/*
+	 * Power Mode Gate
+	 */
+	val = inl(POWER_MODE0_GATE);
+	val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1);
+	outl(val, POWER_MODE0_GATE);
+
+	val = inl(POWER_MODE1_GATE);
+	val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1);
+	outl(val, POWER_MODE1_GATE);
+}
+
+static struct platform_device uart_device = {
+	.name		= "serial8250",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= uart_platform_data,
+	},
+};
+
+static struct platform_device *rts7751r2d_devices[] __initdata = {
+	&uart_device,
+};
 
-unsigned int debug_counter;
+static int __init rts7751r2d_devices_setup(void)
+{
+	return platform_add_devices(rts7751r2d_devices,
+				    ARRAY_SIZE(rts7751r2d_devices));
+}
 
-const char *get_system_type(void)
+static void rts7751r2d_power_off(void)
 {
-	return "RTS7751R2D";
+	ctrl_outw(0x0001, PA_POWOFF);
 }
 
 /*
  * Initialize the board
  */
-void __init platform_setup(void)
+static void __init rts7751r2d_setup(char **cmdline_p)
 {
-	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+	device_initcall(rts7751r2d_devices_setup);
+
 	ctrl_outw(0x0000, PA_OUTPORT);
-	debug_counter = 0;
+	pm_power_off = rts7751r2d_power_off;
+
+	voyagergx_serial_init();
+
+	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
 }
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_rts7751r2d __initmv = {
+	.mv_name		= "RTS7751R2D",
+	.mv_setup		= rts7751r2d_setup,
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= rts7751r2d_inb,
+	.mv_inw			= rts7751r2d_inw,
+	.mv_inl			= rts7751r2d_inl,
+	.mv_outb		= rts7751r2d_outb,
+	.mv_outw		= rts7751r2d_outw,
+	.mv_outl		= rts7751r2d_outl,
+
+	.mv_inb_p		= rts7751r2d_inb_p,
+	.mv_inw_p		= rts7751r2d_inw,
+	.mv_inl_p		= rts7751r2d_inl,
+	.mv_outb_p		= rts7751r2d_outb_p,
+	.mv_outw_p		= rts7751r2d_outw,
+	.mv_outl_p		= rts7751r2d_outl,
+
+	.mv_insb		= rts7751r2d_insb,
+	.mv_insw		= rts7751r2d_insw,
+	.mv_insl		= rts7751r2d_insl,
+	.mv_outsb		= rts7751r2d_outsb,
+	.mv_outsw		= rts7751r2d_outsw,
+	.mv_outsl		= rts7751r2d_outsl,
+
+	.mv_init_irq		= init_rts7751r2d_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_rts7751r2d,
+#endif
+	.mv_irq_demux		= rts7751r2d_irq_demux,
+
+#ifdef CONFIG_USB_SM501
+	.mv_consistent_alloc	= voyagergx_consistent_alloc,
+	.mv_consistent_free	= voyagergx_consistent_free,
+#endif
+};
+ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/sh7710voipgw/Makefile b/arch/sh/boards/renesas/sh7710voipgw/Makefile
new file mode 100644
index 00000000000..77037567633
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7710voipgw/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
new file mode 100644
index 00000000000..e57e7afab8c
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c
@@ -0,0 +1,109 @@
+/*
+ * Renesas Technology SH7710 VoIP Gateway
+ *
+ * Copyright (C) 2006  Ranjit Deshpande
+ * Kenati Technologies Inc.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init sh7710voipgw_init_irq(void)
+{
+	/* Disable all interrupts in IPR registers */
+	ctrl_outw(0x0, INTC_IPRA);
+	ctrl_outw(0x0, INTC_IPRB);
+	ctrl_outw(0x0, INTC_IPRC);
+	ctrl_outw(0x0, INTC_IPRD);
+	ctrl_outw(0x0, INTC_IPRE);
+	ctrl_outw(0x0, INTC_IPRF);
+	ctrl_outw(0x0, INTC_IPRG);
+	ctrl_outw(0x0, INTC_IPRH);
+	ctrl_outw(0x0, INTC_IPRI);
+
+	/* Ack all interrupt sources in the IRR0 register */
+	ctrl_outb(0x3f, INTC_IRR0);
+
+	/* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable
+	 * IRL mode.
+	 */
+	ctrl_outw(0x2aa, INTC_ICR1);
+
+	/* Now make IPR interrupts */
+	make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR,
+			TIMER2_IPR_POS, TIMER2_PRIORITY);
+	make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY);
+
+	/* SCIF0 */
+	make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+			SCIF0_PRIORITY);
+	make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+			SCIF0_PRIORITY);
+	make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+			SCIF0_PRIORITY);
+	make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+			SCIF0_PRIORITY);
+
+	/* DMAC-1 */
+	make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+	make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+	make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+	make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+
+	/* DMAC-2 */
+	make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+	make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+
+	/* IPSEC */
+	make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY);
+
+	/* EDMAC */
+	make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS,
+			EDMAC0_PRIORITY);
+	make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS,
+			EDMAC1_PRIORITY);
+	make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS,
+			EDMAC2_PRIORITY);
+
+	/* SIOF0 */
+	make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+			SIOF0_PRIORITY);
+	make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+			SIOF0_PRIORITY);
+	make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+			SIOF0_PRIORITY);
+	make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+			SIOF0_PRIORITY);
+
+	/* SIOF1 */
+	make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+			SIOF1_PRIORITY);
+	make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+			SIOF1_PRIORITY);
+	make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+			SIOF1_PRIORITY);
+	make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+			SIOF1_PRIORITY);
+
+	/* SLIC IRQ's */
+	make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
+	make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh7710voipgw __initmv = {
+	.mv_name		= "SH7710 VoIP Gateway",
+	.mv_nr_irqs		= 104,
+	.mv_init_irq		= sh7710voipgw_init_irq,
+};
+ALIAS_MV(sh7710voipgw)
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c
index cf979011aa9..cde6e5d192c 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/renesas/systemh/io.c
@@ -5,66 +5,25 @@
  * Based largely on io_se.c.
  *
  * I/O routine for Hitachi 7751 Systemh.
- *
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/systemh/7751systemh.h>
+#include <linux/pci.h>
+#include <asm/systemh7751.h>
 #include <asm/addrspace.h>
 #include <asm/io.h>
 
-#include <linux/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
-/*
- * The 7751 SystemH Engine uses the built-in PCI controller (PCIC)
- * of the 7751 processor, and has a SuperIO accessible on its memory
- * bus.
- */
-
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
 #define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
                                                 of smc lan chip*/
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 static inline volatile __u16 *
 port2adr(unsigned int port)
 {
 	if (port >= 0x2000)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
-	maybebadio(name,(unsigned long)port);
+	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 /*
  * General outline: remap really low stuff [eventually] to SuperIO,
  * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -76,8 +35,8 @@ unsigned char sh7751systemh_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		return *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
@@ -90,13 +49,13 @@ unsigned char sh7751systemh_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		v = *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
 		v = (*port2adr(port))&0xff;
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -104,14 +63,14 @@ unsigned short sh7751systemh_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
 		return *(volatile unsigned int *)ETHER_IOMAP(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -119,14 +78,14 @@ unsigned int sh7751systemh_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                return *(volatile unsigned int *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
 		return *(volatile unsigned int *)ETHER_IOMAP(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -135,8 +94,8 @@ void sh7751systemh_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
@@ -147,37 +106,37 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
 void sh7751systemh_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned short *)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned short *)ETHER_IOMAP(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void sh7751systemh_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned long*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
@@ -194,7 +153,7 @@ void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
 
 void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
@@ -211,73 +170,5 @@ void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long cou
 
 void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* For read/write calls, just copy generic (pass-thru); PCIMBR is  */
-/* already set up.  For a larger memory space, these would need to */
-/* reset PCIMBR as needed on a per-call basis...                   */
-
-unsigned char sh7751systemh_readb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-unsigned short sh7751systemh_readw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-unsigned int sh7751systemh_readl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-void sh7751systemh_writeb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-void sh7751systemh_writew(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-void sh7751systemh_writel(unsigned int b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-	return 0;
-}
-#endif
-
-unsigned long
-sh7751systemh_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
index 8372d967f60..8d016dae233 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/renesas/systemh/irq.c
@@ -15,7 +15,7 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <asm/io.h>
-#include <asm/mach/7751systemh.h>
+#include <asm/systemh7751.h>
 #include <asm/smc37c93x.h>
 
 /* address of external interrupt mask register
@@ -57,12 +57,9 @@ static void shutdown_systemh_irq(unsigned int irq)
 static void disable_systemh_irq(unsigned int irq)
 {
 	if (systemh_irq_mask_register) {
-		unsigned long flags;
 		unsigned long val, mask = 0x01 << 1;
 
 		/* Clear the "irq"th bit in the mask and set it in the request */
-		local_irq_save(flags);
-
 		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
 		val &= ~mask;
 		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
@@ -70,23 +67,18 @@ static void disable_systemh_irq(unsigned int irq)
 		val = ctrl_inl((unsigned long)systemh_irq_request_register);
 		val |= mask;
 		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
-
-		local_irq_restore(flags);
 	}
 }
 
 static void enable_systemh_irq(unsigned int irq)
 {
 	if (systemh_irq_mask_register) {
-		unsigned long flags;
 		unsigned long val, mask = 0x01 << 1;
 
 		/* Set "irq"th bit in the mask register */
-		local_irq_save(flags);
 		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
 		val |= mask;
 		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-		local_irq_restore(flags);
 	}
 }
 
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c
index 826fa3d7669..a8467bf90c2 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/renesas/systemh/setup.c
@@ -15,28 +15,21 @@
  * for more details.
  */
 #include <linux/init.h>
-#include <asm/mach/7751systemh.h>
-#include <asm/mach/io.h>
 #include <asm/machvec.h>
+#include <asm/systemh7751.h>
 
 extern void make_systemh_irq(unsigned int irq);
 
-const char *get_system_type(void)
-{
-	return "7751 SystemH";
-}
-
 /*
  * Initialize IRQ setting
  */
-void __init init_7751systemh_IRQ(void)
+static void __init sh7751systemh_init_irq(void)
 {
-/*  	make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); LAN */
-/*  	make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-4); */
 	make_systemh_irq(0xb);	/* Ethernet interrupt */
 }
 
 struct sh_machine_vector mv_7751systemh __initmv = {
+	.mv_name		= "7751 SystemH",
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= sh7751systemh_inb,
@@ -60,21 +53,6 @@ struct sh_machine_vector mv_7751systemh __initmv = {
 	.mv_outsw		= sh7751systemh_outsw,
 	.mv_outsl		= sh7751systemh_outsl,
 
-	.mv_readb		= sh7751systemh_readb,
-	.mv_readw		= sh7751systemh_readw,
-	.mv_readl		= sh7751systemh_readl,
-	.mv_writeb		= sh7751systemh_writeb,
-	.mv_writew		= sh7751systemh_writew,
-	.mv_writel		= sh7751systemh_writel,
-
-	.mv_isa_port2addr	= sh7751systemh_isa_port2addr,
-
-	.mv_init_irq		= init_7751systemh_IRQ,
+	.mv_init_irq		= sh7751system_init_irq,
 };
 ALIAS_MV(7751systemh)
-
-int __init platform_setup(void)
-{
-	return 0;
-}
-
diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c
index bea6c572ad8..a3a37c9aad2 100644
--- a/arch/sh/boards/saturn/setup.c
+++ b/arch/sh/boards/saturn/setup.c
@@ -9,22 +9,17 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/mach/io.h>
 
 extern int saturn_irq_demux(int irq_nr);
 
-const char *get_system_type(void)
-{
-	return "Sega Saturn";
-}
-
 /*
  * The Machine Vector
  */
 struct sh_machine_vector mv_saturn __initmv = {
+	.mv_name		= "Sega Saturn",
 	.mv_nr_irqs		= 80,	/* Fix this later */
 
 	.mv_isa_port2addr	= saturn_isa_port2addr,
@@ -33,11 +28,4 @@ struct sh_machine_vector mv_saturn __initmv = {
 	.mv_ioremap		= saturn_ioremap,
 	.mv_iounmap		= saturn_iounmap,
 };
-
 ALIAS_MV(saturn)
-
-int __init platform_setup(void)
-{
-	return 0;
-}
-
diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c
index f449a94ddff..8a03d7a52a7 100644
--- a/arch/sh/boards/se/7300/io.c
+++ b/arch/sh/boards/se/7300/io.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/kernel.h>
-#include <asm/mach/se7300.h>
 #include <asm/io.h>
+#include <asm/se7300.h>
 
 #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
 
@@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port)
 	badio(inw, port);
 }
 
+#ifdef CONFIG_SMC91X
 /* MSTLANEX01 LAN at 0xb400:0000 */
 static struct iop laniop = {
 	.start = 0x300,
@@ -110,6 +111,7 @@ static struct iop laniop = {
 	.outb = simple_outb,
 	.outw = simple_outw,
 };
+#endif
 
 /* NE2000 pc card NIC */
 static struct iop neiop = {
@@ -123,6 +125,7 @@ static struct iop neiop = {
 	.outw = simple_outw,
 };
 
+#ifdef CONFIG_IDE
 /* CF in CF slot */
 static struct iop cfiop = {
 	.base = 0xb0600000,
@@ -132,12 +135,13 @@ static struct iop cfiop = {
 	.outb = pcc_outb,
 	.outw = simple_outw,
 };
+#endif
 
 static __inline__ struct iop *
 port2iop(unsigned long port)
 {
 	if (0) ;
-#if defined(CONFIG_SMC91111)
+#if defined(CONFIG_SMC91X)
 	else if (laniop.check(&laniop, port))
 		return &laniop;
 #endif
diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c
index 216a78d1a10..ad1034f98a2 100644
--- a/arch/sh/boards/se/7300/irq.c
+++ b/arch/sh/boards/se/7300/irq.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/mach/se7300.h>
+#include <asm/se7300.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c
index ad51f0a9c1e..4d03bb7774b 100644
--- a/arch/sh/boards/se/7300/led.c
+++ b/arch/sh/boards/se/7300/led.c
@@ -12,24 +12,10 @@
  */
 
 #include <linux/sched.h>
-#include <asm/mach/se7300.h>
-
-static void
-mach_led(int position, int value)
-{
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
-	if (value) {
-		*p |= (1 << 8);
-	} else {
-		*p &= ~(1 << 8);
-	}
-}
-
+#include <asm/se7300.h>
 
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_7300se(void)
+void heartbeat_7300se(void)
 {
 	static unsigned int cnt = 0, period = 0;
 	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c
index ebcd98d4c08..6f082a722d4 100644
--- a/arch/sh/boards/se/7300/setup.c
+++ b/arch/sh/boards/se/7300/setup.c
@@ -9,23 +9,16 @@
 
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
+#include <asm/se7300.h>
 
 void heartbeat_7300se(void);
 void init_7300se_IRQ(void);
 
-const char *
-get_system_type(void)
-{
-	return "SolutionEngine 7300";
-}
-
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_7300se __initmv = {
+	.mv_name = "SolutionEngine 7300",
 	.mv_nr_irqs = 109,
 	.mv_inb = sh7300se_inb,
 	.mv_inw = sh7300se_inw,
@@ -53,13 +46,4 @@ struct sh_machine_vector mv_7300se __initmv = {
 	.mv_heartbeat = heartbeat_7300se,
 #endif
 };
-
 ALIAS_MV(7300se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c
index 755df5ac4a4..72715575458 100644
--- a/arch/sh/boards/se/73180/io.c
+++ b/arch/sh/boards/se/73180/io.c
@@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port)
 	badio(inw, port);
 }
 
+#ifdef CONFIG_SMC91X
 /* MSTLANEX01 LAN at 0xb400:0000 */
 static struct iop laniop = {
 	.start = 0x300,
@@ -110,6 +111,7 @@ static struct iop laniop = {
 	.outb = simple_outb,
 	.outw = simple_outw,
 };
+#endif
 
 /* NE2000 pc card NIC */
 static struct iop neiop = {
@@ -123,6 +125,7 @@ static struct iop neiop = {
 	.outw = simple_outw,
 };
 
+#ifdef CONFIG_IDE
 /* CF in CF slot */
 static struct iop cfiop = {
 	.base = 0xb0600000,
@@ -132,12 +135,13 @@ static struct iop cfiop = {
 	.outb = pcc_outb,
 	.outw = simple_outw,
 };
+#endif
 
 static __inline__ struct iop *
 port2iop(unsigned long port)
 {
 	if (0) ;
-#if defined(CONFIG_SMC91111)
+#if defined(CONFIG_SMC91X)
 	else if (laniop.check(&laniop, port))
 		return &laniop;
 #endif
diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c
index 4344d0ef24a..2c62b8ea350 100644
--- a/arch/sh/boards/se/73180/irq.c
+++ b/arch/sh/boards/se/73180/irq.c
@@ -7,7 +7,6 @@
  * Modified for SH-Mobile SolutionEngine 73180 Support
  *              by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
  *
- *
  */
 
 #include <linux/init.h>
@@ -17,14 +16,6 @@
 #include <asm/mach/se73180.h>
 
 static int
-intreq2irq(int i)
-{
-	if (i == 5)
-		return 10;
-	return 32 + 7 - i;
-}
-
-static int
 irq2intreq(int irq)
 {
 	if (irq == 10)
diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c
index 610439fde6e..4b72e9a3ead 100644
--- a/arch/sh/boards/se/73180/led.c
+++ b/arch/sh/boards/se/73180/led.c
@@ -14,21 +14,8 @@
 #include <linux/sched.h>
 #include <asm/mach/se73180.h>
 
-static void
-mach_led(int position, int value)
-{
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
-	if (value) {
-		*p |= (1 << LED_SHIFT);
-	} else {
-		*p &= ~(1 << LED_SHIFT);
-	}
-}
-
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_73180se(void)
+void heartbeat_73180se(void)
 {
 	static unsigned int cnt = 0, period = 0;
 	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c
index cdb7b5f8d94..b38ef50a160 100644
--- a/arch/sh/boards/se/73180/setup.c
+++ b/arch/sh/boards/se/73180/setup.c
@@ -11,23 +11,17 @@
 
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
+#include <asm/se73180.h>
+#include <asm/irq.h>
 
 void heartbeat_73180se(void);
 void init_73180se_IRQ(void);
 
-const char *
-get_system_type(void)
-{
-	return "SolutionEngine 73180";
-}
-
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_73180se __initmv = {
+	.mv_name = "SolutionEngine 73180",
 	.mv_nr_irqs = 108,
 	.mv_inb = sh73180se_inb,
 	.mv_inw = sh73180se_inw,
@@ -51,17 +45,9 @@ struct sh_machine_vector mv_73180se __initmv = {
 	.mv_outsl = sh73180se_outsl,
 
 	.mv_init_irq = init_73180se_IRQ,
+	.mv_irq_demux = shmse_irq_demux,
 #ifdef CONFIG_HEARTBEAT
 	.mv_heartbeat = heartbeat_73180se,
 #endif
 };
-
 ALIAS_MV(73180se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile
new file mode 100644
index 00000000000..4291069c0b4
--- /dev/null
+++ b/arch/sh/boards/se/7343/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
new file mode 100644
index 00000000000..646661a146a
--- /dev/null
+++ b/arch/sh/boards/se/7343/io.c
@@ -0,0 +1,275 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+	unsigned long start, end;
+	unsigned long base;
+	struct iop *(*check) (struct iop * p, unsigned long port);
+	unsigned char (*inb) (struct iop * p, unsigned long port);
+	unsigned short (*inw) (struct iop * p, unsigned long port);
+	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+	static int count;
+
+	if (count < 100)
+		count++;
+
+	port &= 0xFFFF;
+
+	if ((p->start <= port) && (port <= p->end))
+		return p;
+	else
+		badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+		return p;
+	return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+	return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+	return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	*(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+	*(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+	unsigned long v;
+
+	if (port & 1)
+		addr += 0x00400000;
+	v = *(volatile unsigned char *) addr;
+	return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+
+	if (port & 1)
+		addr += 0x00400000;
+	*(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+	badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+	.start = 0x00,
+	.end = 0x0F,
+	.base = 0x04000000,
+	.check = simple_check,
+	.inb = simple_inb,
+	.inw = simple_inw,
+	.outb = simple_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+	.start = 0x280,
+	.end = 0x29f,
+	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
+	.check = simple_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+	.base = 0xb0600000,
+	.check = ide_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+	if (0) ;
+#if defined(CONFIG_SMC91X)
+	else if (laniop.check(&laniop, port))
+		return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+	else if (neiop.check(&neiop, port))
+		return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+	else if (cfiop.check(&cfiop, port))
+		return &cfiop;
+#endif
+	else
+		return NULL;
+}
+
+static inline void
+delay(void)
+{
+	ctrl_inw(0xac000000);
+	ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+	unsigned char v = sh7343se_inb(port);
+	delay();
+	return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+	badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+	sh7343se_outb(value, port);
+	delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned short *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *a = (unsigned char *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned short *a = (unsigned short *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
new file mode 100644
index 00000000000..b41e3d4ea37
--- /dev/null
+++ b/arch/sh/boards/se/7343/irq.c
@@ -0,0 +1,193 @@
+/*
+ * arch/sh/boards/se/7343/irq.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+static void
+disable_intreq_irq(unsigned int irq)
+{
+	int bit = irq - OFFCHIP_IRQ_BASE;
+	u16 val;
+
+	val = ctrl_inw(PA_CPLD_IMSK);
+	val |= 1 << bit;
+	ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+enable_intreq_irq(unsigned int irq)
+{
+	int bit = irq - OFFCHIP_IRQ_BASE;
+	u16 val;
+
+	val = ctrl_inw(PA_CPLD_IMSK);
+	val &= ~(1 << bit);
+	ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+mask_and_ack_intreq_irq(unsigned int irq)
+{
+	disable_intreq_irq(irq);
+}
+
+static unsigned int
+startup_intreq_irq(unsigned int irq)
+{
+	enable_intreq_irq(irq);
+	return 0;
+}
+
+static void
+shutdown_intreq_irq(unsigned int irq)
+{
+	disable_intreq_irq(irq);
+}
+
+static void
+end_intreq_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_intreq_irq(irq);
+}
+
+static struct hw_interrupt_type intreq_irq_type = {
+	.typename = "FPGA-IRQ",
+	.startup = startup_intreq_irq,
+	.shutdown = shutdown_intreq_irq,
+	.enable = enable_intreq_irq,
+	.disable = disable_intreq_irq,
+	.ack = mask_and_ack_intreq_irq,
+	.end = end_intreq_irq
+};
+
+static void
+make_intreq_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &intreq_irq_type;
+	disable_intreq_irq(irq);
+}
+
+int
+shmse_irq_demux(int irq)
+{
+	int bit;
+	volatile u16 val;
+
+	if (irq == IRQ5_IRQ) {
+		/* Read status Register */
+		val = ctrl_inw(PA_CPLD_ST);
+		bit = ffs(val);
+		if (bit != 0)
+			return OFFCHIP_IRQ_BASE + bit - 1;
+	}
+	return irq;
+}
+
+/* IRQ5 is multiplexed between the following sources:
+ * 1. PC Card socket
+ * 2. Extension slot
+ * 3. USB Controller
+ * 4. Serial Controller
+ *
+ * We configure IRQ5 as a cascade IRQ.
+ */
+static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade",
+				NULL, NULL};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init
+init_7343se_IRQ(void)
+{
+	/* Setup Multiplexed interrupts */
+	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
+					 * low.
+					 */
+	/* Mask all CPLD controller interrupts */
+	ctrl_outw(0x0fff, PA_CPLD_IMSK);
+
+	/* PC Card interrupts */
+	make_intreq_irq(PC_IRQ0);
+	make_intreq_irq(PC_IRQ1);
+	make_intreq_irq(PC_IRQ2);
+	make_intreq_irq(PC_IRQ3);
+
+	/* Extension Slot Interrupts */
+	make_intreq_irq(EXT_IRQ0);
+	make_intreq_irq(EXT_IRQ1);
+	make_intreq_irq(EXT_IRQ2);
+	make_intreq_irq(EXT_IRQ3);
+
+	/* USB Controller interrupts */
+	make_intreq_irq(USB_IRQ0);
+	make_intreq_irq(USB_IRQ1);
+
+	/* Serial Controller interrupts */
+	make_intreq_irq(UART_IRQ0);
+	make_intreq_irq(UART_IRQ1);
+
+	/* Setup all external interrupts to be active low */
+	ctrl_outw(0xaaaa, INTC_ICR1);
+
+	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY);
+	setup_irq(IRQ5_IRQ, &irq5);
+	/* Set port control to use IRQ5 */
+	*(u16 *)0xA4050108 &= ~0xc;
+
+	make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+	make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8);
+
+	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
+
+	make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+	make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+
+	/* I2C block */
+	make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+	make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+		     IIC0_PRIORITY);
+	make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+		     IIC0_PRIORITY);
+	make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+
+	make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+	make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+		     IIC1_PRIORITY);
+	make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+		     IIC1_PRIORITY);
+	make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+
+	/* SIOF */
+	make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+
+	/* SIU */
+	make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
+
+	/* VIO interrupt */
+	make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+	make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+	make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+
+	/*MFI interrupt*/
+
+	make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY);
+
+	/* LCD controller */
+	make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
+	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
+}
diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c
new file mode 100644
index 00000000000..6a439cf83e4
--- /dev/null
+++ b/arch/sh/boards/se/7343/led.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/boards/se/7343/led.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/mach/se7343.h>
+
+/* Cycle the LED's in the clasic Knightrider/Sun pattern */
+void heartbeat_7343se(void)
+{
+	static unsigned int cnt = 0, period = 0;
+	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
+	static unsigned bit = 0, up = 1;
+
+	cnt += 1;
+	if (cnt < period) {
+		return;
+	}
+
+	cnt = 0;
+
+	/* Go through the points (roughly!):
+	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
+	 */
+	period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
+
+	if (up) {
+		if (bit == 7) {
+			bit--;
+			up = 0;
+		} else {
+			bit++;
+		}
+	} else {
+		if (bit == 0) {
+			bit++;
+			up = 1;
+		} else {
+			bit--;
+		}
+	}
+	*p = 1 << (bit + LED_SHIFT);
+
+}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
new file mode 100644
index 00000000000..787322291fb
--- /dev/null
+++ b/arch/sh/boards/se/7343/setup.c
@@ -0,0 +1,84 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/mach/se7343.h>
+#include <asm/irq.h>
+
+void heartbeat_7343se(void);
+void init_7343se_IRQ(void);
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x1000000F,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/*
+		 * shared with other devices via externel
+		 * interrupt controller in FPGA...
+		 */
+		.start	= EXT_IRQ2,
+		.end	= EXT_IRQ2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *smc91x_platform_devices[] __initdata = {
+	&smc91x_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	return platform_add_devices(smc91x_platform_devices,
+				    ARRAY_SIZE(smc91x_platform_devices));
+}
+
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	device_initcall(sh7343se_devices_setup);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_nr_irqs = 108,
+	.mv_inb = sh7343se_inb,
+	.mv_inw = sh7343se_inw,
+	.mv_inl = sh7343se_inl,
+	.mv_outb = sh7343se_outb,
+	.mv_outw = sh7343se_outw,
+	.mv_outl = sh7343se_outl,
+
+	.mv_inb_p = sh7343se_inb_p,
+	.mv_inw_p = sh7343se_inw,
+	.mv_inl_p = sh7343se_inl,
+	.mv_outb_p = sh7343se_outb_p,
+	.mv_outw_p = sh7343se_outw,
+	.mv_outl_p = sh7343se_outl,
+
+	.mv_insb = sh7343se_insb,
+	.mv_insw = sh7343se_insw,
+	.mv_insl = sh7343se_insl,
+	.mv_outsb = sh7343se_outsb,
+	.mv_outsw = sh7343se_outsw,
+	.mv_outsl = sh7343se_outsl,
+
+	.mv_init_irq = init_7343se_IRQ,
+	.mv_irq_demux = shmse_irq_demux,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat = heartbeat_7343se,
+#endif
+};
+ALIAS_MV(7343se)
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile
index be89a73cc41..9a5035f80ec 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/se/770x/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := mach.o setup.o io.o irq.o led.o
-
+obj-y	 := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index 9a39ee96314..9941949331a 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -1,4 +1,4 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
  *
  * linux/arch/sh/kernel/io_se.c
  *
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se/se.h>
+#include <asm/se.h>
 
 /* SH pcmcia io window base, start and end.  */
 int sh_pcic_io_wbase = 0xb8400000;
@@ -20,11 +20,6 @@ int sh_pcic_io_stop;
 int sh_pcic_io_type;
 int sh_pcic_io_dummy;
 
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
    can be accessed only with 16-bit wide.  */
@@ -52,10 +47,6 @@ shifted_port(unsigned long port)
 		return 1;
 }
 
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
 unsigned char se_inb(unsigned long port)
 {
 	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
@@ -76,7 +67,7 @@ unsigned char se_inb_p(unsigned long port)
 		v = (*port2adr(port) >> 8); 
 	else
 		v = (*port2adr(port))&0xff; 
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -86,13 +77,13 @@ unsigned short se_inw(unsigned long port)
 	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
 		return *port2adr(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
 unsigned int se_inl(unsigned long port)
 {
-	maybebadio(inl, port);
+	maybebadio(port);
 	return 0;
 }
 
@@ -114,7 +105,7 @@ void se_outb_p(unsigned char value, unsigned long port)
 		*(port2adr(port)) = value << 8;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
 void se_outw(unsigned short value, unsigned long port)
@@ -123,12 +114,12 @@ void se_outw(unsigned short value, unsigned long port)
 	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
 		*port2adr(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void se_outl(unsigned int value, unsigned long port)
 {
-	maybebadio(outl, port);
+	maybebadio(port);
 }
 
 void se_insb(unsigned long port, void *addr, unsigned long count)
@@ -159,7 +150,7 @@ void se_insw(unsigned long port, void *addr, unsigned long count)
 
 void se_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void se_outsb(unsigned long port, const void *addr, unsigned long count)
@@ -190,37 +181,5 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count)
 
 void se_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
-	return 0;
-}
-
-unsigned long
-se_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index 3e558716ce1..cff6700bbaf 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se/se.h>
+#include <asm/se.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c
index 3cddbda025f..daf7b1ee786 100644
--- a/arch/sh/boards/se/770x/led.c
+++ b/arch/sh/boards/se/770x/led.c
@@ -9,22 +9,8 @@
  * This file contains Solution Engine specific LED code.
  */
 
-#include <asm/se/se.h>
-
-static void mach_led(int position, int value)
-{
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
-	if (value) {
-		*p |= (1<<8);
-	} else {
-		*p &= ~(1<<8);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
 #include <linux/sched.h>
+#include <asm/se.h>
 
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
 void heartbeat_se(void)
@@ -64,4 +50,3 @@ void heartbeat_se(void)
 	*p = 1<<(bit+8);
 
 }
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c
deleted file mode 100644
index 6ec07bd3dcf..00000000000
--- a/arch/sh/boards/se/770x/mach.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_se.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se/io.h>
-
-void heartbeat_se(void);
-void setup_se(void);
-void init_se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_se __initmv = {
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	.mv_nr_irqs		= 86,
-#endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
-	.mv_isa_port2addr	= se_isa_port2addr,
-
-	.mv_init_irq		= init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_se,
-#endif
-};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 7d1a071727c..f3f82b7c821 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -7,15 +7,17 @@
  * Hitachi SolutionEngine Support.
  *
  */
-
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <asm/io.h>
-#include <asm/se/se.h>
-#include <asm/se/smc37c93x.h>
+#include <asm/se.h>
+#include <asm/smc37c93x.h>
+#include <asm/machvec.h>
+
+void heartbeat_se(void);
+void init_se_IRQ(void);
 
 /*
  * Configure the Super I/O chip
@@ -26,7 +28,8 @@ static void __init smsc_config(int index, int data)
 	outb_p(data, DATA_PORT);
 }
 
-static void __init init_smsc(void)
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
 {
 	outb_p(CONFIG_ENTER, CONFIG_PORT);
 	outb_p(CONFIG_ENTER, CONFIG_PORT);
@@ -69,16 +72,46 @@ static void __init init_smsc(void)
 	outb_p(CONFIG_EXIT, CONFIG_PORT);
 }
 
-const char *get_system_type(void)
-{
-	return "SolutionEngine";
-}
-
 /*
- * Initialize the board
+ * The Machine Vector
  */
-void __init platform_setup(void)
-{
-	init_smsc();
-	/* XXX: RTC setting comes here */
-}
+struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+	.mv_nr_irqs		= 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+	.mv_nr_irqs		= 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+	.mv_nr_irqs		= 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	.mv_nr_irqs		= 86,
+#endif
+
+	.mv_inb			= se_inb,
+	.mv_inw			= se_inw,
+	.mv_inl			= se_inl,
+	.mv_outb		= se_outb,
+	.mv_outw		= se_outw,
+	.mv_outl		= se_outl,
+
+	.mv_inb_p		= se_inb_p,
+	.mv_inw_p		= se_inw,
+	.mv_inl_p		= se_inl,
+	.mv_outb_p		= se_outb_p,
+	.mv_outw_p		= se_outw,
+	.mv_outl_p		= se_outl,
+
+	.mv_insb		= se_insb,
+	.mv_insw		= se_insw,
+	.mv_insl		= se_insl,
+	.mv_outsb		= se_outsb,
+	.mv_outsw		= se_outsw,
+	.mv_outsl		= se_outsl,
+
+	.mv_init_irq		= init_se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_se,
+#endif
+};
+ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile
index ce7ca247f84..188900c4832 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/se/7751/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := mach.o setup.o io.o irq.o led.o
+obj-y	 := setup.o io.o irq.o
 
 obj-$(CONFIG_PCI) += pci.o
-
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
index 99041b26926..e8d846cec89 100644
--- a/arch/sh/boards/se/7751/io.c
+++ b/arch/sh/boards/se/7751/io.c
@@ -1,6 +1,4 @@
-/* 
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
  *
@@ -10,96 +8,21 @@
  * placeholder code from io_se.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
 #include <asm/addrspace.h>
 
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#if 0
-/******************************************************************
- * Variables from io_se.c, related to PCMCIA (not PCI); we're not
- * compiling them in, and have removed references from functions
- * which follow.  [Many checked for IO ports in the range bounded
- * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset.
- * As start/stop are uninitialized, only port 0x0 would match?]
- * When used, remember to adjust names to avoid clash with io_se?
- *****************************************************************/
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-/*************************************************************/
-#endif
-
-/*
- * The 7751 Solution Engine uses the built-in PCI controller (PCIC)
- * of the 7751 processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */ 
-
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
+static inline volatile u16 *port2adr(unsigned int port)
 {
 	if (port >= 0x2000)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
-	maybebadio(name,(unsigned long)port);
+	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
-#if 0
-/* The 7751 Solution Engine seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-#endif
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 /*
  * General outline: remap really low stuff [eventually] to SuperIO,
  * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -111,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		return (*port2adr(port))&0xff; 
+		return (*port2adr(port)) & 0xff;
 }
 
 unsigned char sh7751se_inb_p(unsigned long port)
@@ -123,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		v = (*port2adr(port))&0xff; 
-	delay();
+		v = (*port2adr(port)) & 0xff;
+	ctrl_delay();
 	return v;
 }
 
@@ -135,12 +58,12 @@ unsigned short sh7751se_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -148,12 +71,12 @@ unsigned int sh7751se_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-                return *(volatile unsigned int *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -162,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
@@ -172,73 +95,41 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
 void sh7751se_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned short *)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void sh7751se_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-        	*((unsigned long*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-	return 0;
-}
-#endif
-
-unsigned long
-sh7751se_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
index bf6c023615d..c607b0a4847 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/se/7751/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c
index a878726d3c7..ff0355dea81 100644
--- a/arch/sh/boards/se/7751/led.c
+++ b/arch/sh/boards/se/7751/led.c
@@ -8,23 +8,8 @@
  *
  * This file contains Solution Engine specific LED code.
  */
-
-#include <asm/se7751/se7751.h>
-
-static void mach_led(int position, int value)
-{
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
-	if (value) {
-		*p |= (1<<8);
-	} else {
-		*p &= ~(1<<8);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
 #include <linux/sched.h>
+#include <asm/se7751.h>
 
 /* Cycle the LED's in the clasic Knightrider/Sun pattern */
 void heartbeat_7751se(void)
@@ -64,4 +49,3 @@ void heartbeat_7751se(void)
 	*p = 1<<(bit+8);
 
 }
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c
deleted file mode 100644
index 62d8d3e6259..00000000000
--- a/arch/sh/boards/se/7751/mach.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_7751se.c
- *
- * Minor tweak of mach_se.c file to reference 7751se-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi 7751 SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se7751/io.h>
-
-void heartbeat_7751se(void);
-void init_7751se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_7751se __initmv = {
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
-	.mv_isa_port2addr	= sh7751se_isa_port2addr,
-
-	.mv_init_irq		= init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_7751se,
-#endif
-};
-ALIAS_MV(7751se)
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 48dc5aee67d..73e826310ba 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * linux/arch/sh/kernel/setup_7751se.c
  *
  * Copyright (C) 2000  Kazumoto Kojima
@@ -11,78 +11,15 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
-
-#include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <asm/io.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
 
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-#endif
-
-/*
- * Configure the Super I/O chip
- */
-#if 0
-/* Leftover code from regular Solution Engine, for reference. */
-/* The SH7751 Solution Engine has a different SuperIO. */
-static void __init smsc_config(int index, int data)
-{
-	outb_p(index, INDEX_PORT);
-	outb_p(data, DATA_PORT);
-}
-
-static void __init init_smsc(void)
-{
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-
-	/* FDC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
-	/* IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
-	/* AUXIO (GPIO): to use IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
-	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
-	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
-	/* COM1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x03);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
-	/* COM2 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x02);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
-	/* RTC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
-	/* XXX: PARPORT, KBD, and MOUSE will come here... */
-	outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-#endif
-
-const char *get_system_type(void)
-{
-	return "7751 SolutionEngine";
-}
+void heartbeat_7751se(void);
+void init_7751se_IRQ(void);
 
 #ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
 static int kgdb_uart_setup(void);
 static struct kgdb_sermap kgdb_uart_sermap = 
 { "ttyS", 0, kgdb_uart_setup, NULL };
@@ -91,7 +28,7 @@ static struct kgdb_sermap kgdb_uart_sermap =
 /*
  * Initialize the board
  */
-void __init platform_setup(void)
+static void __init sh7751se_setup(char **cmdline_p)
 {
 	/* Call init_smsc() replacement to set up SuperIO. */
 	/* XXX: RTC setting comes here */
@@ -225,3 +162,37 @@ static int kgdb_uart_setup(void)
 	return 0;
 }
 #endif /* CONFIG_SH_KGDB */
+
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_setup		= sh7751se_setup,
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= sh7751se_inb,
+	.mv_inw			= sh7751se_inw,
+	.mv_inl			= sh7751se_inl,
+	.mv_outb		= sh7751se_outb,
+	.mv_outw		= sh7751se_outw,
+	.mv_outl		= sh7751se_outl,
+
+	.mv_inb_p		= sh7751se_inb_p,
+	.mv_inw_p		= sh7751se_inw,
+	.mv_inl_p		= sh7751se_inl,
+	.mv_outb_p		= sh7751se_outb_p,
+	.mv_outw_p		= sh7751se_outw,
+	.mv_outl_p		= sh7751se_outl,
+
+	.mv_insl		= sh7751se_insl,
+	.mv_outsl		= sh7751se_outsl,
+
+	.mv_init_irq		= init_7751se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_7751se,
+#endif
+};
+ALIAS_MV(7751se)
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/sh03/rtc.c
index d609863cfe5..0a9266bb51c 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/sh03/rtc.c
@@ -10,9 +10,10 @@
 #include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/bcd.h>
-#include <asm/io.h>
 #include <linux/rtc.h>
 #include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
 
 #define RTC_BASE	0xb0000000
 #define RTC_SEC1	(RTC_BASE + 0)
@@ -34,8 +35,6 @@
 #define RTC_BUSY	1
 #define RTC_STOP	2
 
-extern void (*rtc_get_time)(struct timespec *);
-extern int (*rtc_set_time)(const time_t);
 extern spinlock_t rtc_lock;
 
 unsigned long get_cmos_time(void)
@@ -128,6 +127,6 @@ int sh03_rtc_settimeofday(const time_t secs)
 
 void sh03_time_init(void)
 {
-	rtc_get_time = sh03_rtc_gettimeofday;
-	rtc_set_time = sh03_rtc_settimeofday;
+	rtc_sh_get_time = sh03_rtc_gettimeofday;
+	rtc_sh_set_time = sh03_rtc_settimeofday;
 }
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index 60290f8f289..6c310587ddf 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -7,22 +7,13 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
 #include <asm/io.h>
+#include <asm/rtc.h>
 #include <asm/sh03/io.h>
 #include <asm/sh03/sh03.h>
 #include <asm/addrspace.h>
-#include "../../drivers/pci/pci-sh7751.h"
 
-extern void (*board_time_init)(void);
-
-const char *get_system_type(void)
-{
-	return "Interface CTP/PCI-SH03)";
-}
-
-void init_sh03_IRQ(void)
+static void __init init_sh03_IRQ(void)
 {
 	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 
@@ -34,38 +25,34 @@ void init_sh03_IRQ(void)
 
 extern void *cf_io_base;
 
-unsigned long sh03_isa_port2addr(unsigned long port)
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
 {
 	if (PXSEG(port))
-		return port;
+		return (void __iomem *)port;
 	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) {
-		return (unsigned long)cf_io_base + port;
-	}
-        return port + SH7751_PCI_IO_BASE;
+	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+		return (void __iomem *)((unsigned long)cf_io_base + port);
+
+        return (void __iomem *)(port + PCI_IO_BASE);
 }
 
-/*
- * The Machine Vector
- */
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
 
 struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
-	.mv_isa_port2addr	= sh03_isa_port2addr,
+	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
 
 #ifdef CONFIG_HEARTBEAT
 	.mv_heartbeat		= heartbeat_sh03,
 #endif
 };
-
 ALIAS_MV(sh03)
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-int __init platform_setup(void)
-{
-	board_time_init = sh03_time_init;
-	return 0;
-}
diff --git a/arch/sh/boards/sh2000/Makefile b/arch/sh/boards/sh2000/Makefile
deleted file mode 100644
index 05d390c3599..00000000000
--- a/arch/sh/boards/sh2000/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the SH2000 specific parts of the kernel
-#
-
-obj-y	 := setup.o
-
diff --git a/arch/sh/boards/sh2000/setup.c b/arch/sh/boards/sh2000/setup.c
deleted file mode 100644
index 2fe6a11765e..00000000000
--- a/arch/sh/boards/sh2000/setup.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/sh/kernel/setup_sh2000.c
- *
- * Copyright (C) 2001  SUGIOKA Tochinobu
- *
- * SH-2000 Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/sh2000.h>
-
-#define CF_CIS_BASE	0xb4200000
-
-#define PORT_PECR	0xa4000108
-#define PORT_PHCR	0xa400010E
-#define	PORT_ICR1	0xa4000010
-#define	PORT_IRR0	0xa4000004
-
-#define IDE_OFFSET	0xb6200000
-#define NIC_OFFSET	0xb6000000
-#define EXTBUS_OFFSET	0xba000000
-
-
-const char *get_system_type(void)
-{
-	return "sh2000";
-}
-
-static unsigned long sh2000_isa_port2addr(unsigned long offset)
-{
-	if((offset & ~7) == 0x1f0 || offset == 0x3f6)
-		return IDE_OFFSET + offset;
-	else if((offset & ~0x1f) == 0x300)
-		return NIC_OFFSET + offset;
-	return EXTBUS_OFFSET + offset;
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_sh2000 __initmv = {
-        .mv_nr_irqs		= 80,
-        .mv_isa_port2addr	= sh2000_isa_port2addr,
-};
-ALIAS_MV(sh2000)
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
-	/* XXX: RTC setting comes here */
-
-	/* These should be done by BIOS/IPL ... */
-	/* Enable nCE2A, nCE2B output */
-	ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR);
-	/* Enable the Compact Flash card, and set the level interrupt */
-	ctrl_outw(0x0042, CF_CIS_BASE+0x0200);
-	/* Enable interrupt */
-	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR);
-	ctrl_outw(1, PORT_ICR1);
-	ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0);
-	printk(KERN_INFO "SH-2000 Setup...done\n");
-	return 0;
-}
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
new file mode 100644
index 00000000000..3190cc72430
--- /dev/null
+++ b/arch/sh/boards/shmin/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SHMIN board.
+#
+
+obj-y	 := setup.o
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
new file mode 100644
index 00000000000..2f0c19706cf
--- /dev/null
+++ b/arch/sh/boards/shmin/setup.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/boards/shmin/setup.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * SHMIN Support.
+ */
+#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/shmin/shmin.h>
+#include <asm/clock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define PFC_PHCR	0xa400010e
+
+static void __init init_shmin_irq(void)
+{
+	ctrl_outw(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
+	ctrl_outw(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
+}
+
+static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+{
+	static int dummy;
+
+	if ((port & ~0x1f) == SHMIN_NE_BASE)
+		return (void __iomem *)(SHMIN_IO_BASE + port);
+
+	dummy = 0;
+
+	return &dummy;
+
+}
+
+struct sh_machine_vector mv_shmin __initmv = {
+	.mv_name	= "SHMIN",
+	.mv_init_irq	= init_shmin_irq,
+	.mv_ioport_map	= shmin_ioport_map,
+};
+ALIAS_MV(shmin)
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c
index e2eb78fc381..0f482426455 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/snapgear/io.c
@@ -1,6 +1,4 @@
-/* 
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
@@ -11,67 +9,22 @@
  * placeholder code from io_se.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/addrspace.h>
 
-#include <asm/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
 #ifdef CONFIG_SH_SECUREEDGE5410
 unsigned short secureedge5410_ioport;
 #endif
 
-/*
- * The SnapGear uses the built-in PCI controller (PCIC)
- * of the 7751 processor
- */ 
-
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
-
 static inline volatile __u16 *port2adr(unsigned int port)
 {
-#if 0
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#endif
-	maybebadio(name,(unsigned long)port);
+	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 /*
  * General outline: remap really low stuff [eventually] to SuperIO,
  * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -79,148 +32,106 @@ static inline volatile __u16 *port2adr(unsigned int port)
  * should be way beyond the window, and is used  w/o translation for
  * compatibility.
  */
-
 unsigned char snapgear_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		return (*port2adr(port))&0xff; 
+		return (*port2adr(port)) & 0xff;
 }
 
-
 unsigned char snapgear_inb_p(unsigned long port)
 {
 	unsigned char v;
 
 	if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		v = (*port2adr(port))&0xff; 
-	delay();
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
 	return v;
 }
 
-
 unsigned short snapgear_inw(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
-
 unsigned int snapgear_inl(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned int *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
-
 void snapgear_outb(unsigned char value, unsigned long port)
 {
 
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
 
-
 void snapgear_outb_p(unsigned char value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
-
 void snapgear_outw(unsigned short value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned short *)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
-
 void snapgear_outl(unsigned int value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned long*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void snapgear_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-
-#if 0
-static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
-	return 0;
-}
-#endif
-
-unsigned long snapgear_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
index b71e009da35..1659fdd6695 100644
--- a/arch/sh/boards/snapgear/rtc.c
+++ b/arch/sh/boards/snapgear/rtc.c
@@ -17,14 +17,9 @@
 #include <linux/time.h>
 #include <linux/rtc.h>
 #include <linux/mc146818rtc.h>
-
 #include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/mc146818rtc.h>
-
-/****************************************************************************/
 
-static int use_ds1302 = 0;
+static int use_ds1302;
 
 /****************************************************************************/
 /*
@@ -82,10 +77,6 @@ static unsigned int ds1302_readbyte(unsigned int addr)
 	unsigned int	val;
 	unsigned long	flags;
 
-#if 0
-	printk("SnapGear RTC: ds1302_readbyte(addr=%x)\n", addr);
-#endif
-
 	local_irq_save(flags);
 	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -104,10 +95,6 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val)
 {
 	unsigned long	flags;
 
-#if 0
-	printk("SnapGear RTC: ds1302_writebyte(addr=%x)\n", addr);
-#endif
-
 	local_irq_save(flags);
 	set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
 	set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -168,11 +155,8 @@ void __init secureedge5410_rtc_init(void)
 		}
 
 	if (use_ds1302) {
-		rtc_get_time = snapgear_rtc_gettimeofday;
-		rtc_set_time = snapgear_rtc_settimeofday;
-	} else {
-		rtc_get_time = sh_rtc_gettimeofday;
-		rtc_set_time = sh_rtc_settimeofday;
+		rtc_sh_get_time = snapgear_rtc_gettimeofday;
+		rtc_sh_set_time = snapgear_rtc_settimeofday;
 	}
 		
 	printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal");
@@ -187,10 +171,8 @@ void snapgear_rtc_gettimeofday(struct timespec *ts)
 {
 	unsigned int sec, min, hr, day, mon, yr;
 
-	if (!use_ds1302) {
-		sh_rtc_gettimeofday(ts);
+	if (!use_ds1302)
 		return;
-	}
 
  	sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC));
  	min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN));
@@ -231,7 +213,7 @@ int snapgear_rtc_settimeofday(const time_t secs)
 	unsigned long nowtime;
 
 	if (!use_ds1302)
-		return sh_rtc_settimeofday(secs);
+		return 0;
 
 /*
  *	This is called direct from the kernel timer handling code.
@@ -240,10 +222,6 @@ int snapgear_rtc_settimeofday(const time_t secs)
 
 	nowtime = secs;
 
-#if 1
-	printk("SnapGear RTC: snapgear_rtc_settimeofday(nowtime=%ld)\n", nowtime);
-#endif
-
 	/* STOP RTC */
 	ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80);
 
@@ -329,5 +307,3 @@ void secureedge5410_cmos_write(unsigned char val, int addr)
 	default:                                                      break;
 	}
 }
-
-/****************************************************************************/
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index f1f7c70c940..f5e98c56b53 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -1,5 +1,4 @@
-/****************************************************************************/
-/* 
+/*
  * linux/arch/sh/boards/snapgear/setup.c
  *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
@@ -12,8 +11,6 @@
  *           Modified for 7751 Solution Engine by
  *           Ian da Silva and Jeremy Siegel, 2001.
  */
-/****************************************************************************/
-
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -21,14 +18,13 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-
 #include <asm/machvec.h>
-#include <asm/mach/io.h>
+#include <asm/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
+#include <asm/rtc.h>
 #include <asm/cpu/timer.h>
 
-extern void (*board_time_init)(void);
 extern void secureedge5410_rtc_init(void);
 extern void pcibios_init(void);
 
@@ -85,101 +81,20 @@ static void __init init_snapgear_IRQ(void)
 	make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
 }
 
-/****************************************************************************/
-/*
- *	Fast poll interrupt simulator.
- */
-
 /*
- * Leave all of the fast timer/fast poll stuff commented out for now, since
- * it's not clear whether it actually works or not. Since it wasn't being used
- * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM
- */
-#if 0
-#define FAST_POLL	1000
-//#define FAST_POLL_INTR
-
-#define FASTTIMER_IRQ   17
-#define FASTTIMER_IPR_ADDR  INTC_IPRA
-#define FASTTIMER_IPR_POS    2
-#define FASTTIMER_PRIORITY   3
-
-#ifdef FAST_POLL_INTR
-#define TMU1_TCR_INIT	0x0020
-#else
-#define TMU1_TCR_INIT	0
-#endif
-#define TMU_TSTR_INIT	1
-#define TMU1_TCR_CALIB	0x0000
-
-
-#ifdef FAST_POLL_INTR
-static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs)
-{
-	unsigned long timer_status;
-    timer_status = ctrl_inw(TMU1_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU1_TCR);
-}
-#endif
-
-/*
- * return the current ticks on the fast timer
- */
-
-unsigned long fast_timer_count(void)
-{
-	return(ctrl_inl(TMU1_TCNT));
-}
-
-/*
- * setup a fast timer for profiling etc etc
+ * Initialize the board
  */
-
-static void setup_fast_timer()
-{
-	unsigned long interval;
-
-#ifdef FAST_POLL_INTR
-	interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL;
-
-	make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS,
-			FASTTIMER_PRIORITY);
-
-	printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ);
-
-	if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer",
-			NULL) != 0)
-		printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__);
-#else
-	printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ);
-	interval = 0xffffffff;
-#endif
-
-	ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */
-	ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
-	ctrl_outl(interval, TMU1_TCOR);
-	ctrl_outl(interval, TMU1_TCNT);
-	ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */
-
-	printk("Timer count 1 = 0x%x\n", fast_timer_count());
-	udelay(1000);
-	printk("Timer count 2 = 0x%x\n", fast_timer_count());
-}
-#endif
-
-/****************************************************************************/
-
-const char *get_system_type(void)
+static void __init snapgear_setup(char **cmdline_p)
 {
-	return "SnapGear SecureEdge5410";
+	board_time_init = secureedge5410_rtc_init;
 }
 
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_setup		= snapgear_setup,
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= snapgear_inb,
@@ -196,20 +111,6 @@ struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_outw_p		= snapgear_outw,
 	.mv_outl_p		= snapgear_outl,
 
-	.mv_isa_port2addr	= snapgear_isa_port2addr,
-
 	.mv_init_irq		= init_snapgear_IRQ,
 };
 ALIAS_MV(snapgear)
-
-/*
- * Initialize the board
- */
-
-int __init platform_setup(void)
-{
-	board_time_init = secureedge5410_rtc_init;
-
-	return 0;
-}
-
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 236398fbc08..8c64baa3036 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -11,14 +11,12 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/microdev.h>
 
 #define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
 
-
 static const struct {
 	unsigned char fpgaIrq;
 	unsigned char mapped;
@@ -93,53 +91,42 @@ static struct hw_interrupt_type microdev_irq_type = {
 
 static void disable_microdev_irq(unsigned int irq)
 {
-	unsigned int flags;
 	unsigned int fpgaIrq;
 
-	if (irq >= NUM_EXTERNAL_IRQS) return;
-	if (!fpgaIrqTable[irq].mapped) return;
+	if (irq >= NUM_EXTERNAL_IRQS)
+		return;
+	if (!fpgaIrqTable[irq].mapped)
+		return;
 
 	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
 
-		/* disable interrupts */
-	local_irq_save(flags);
-
-		/* disable interupts on the FPGA INTC register */
+	/* disable interupts on the FPGA INTC register */
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-
-		/* restore interrupts */
-	local_irq_restore(flags);
 }
 
 static void enable_microdev_irq(unsigned int irq)
 {
 	unsigned long priorityReg, priorities, pri;
-	unsigned int flags;
 	unsigned int fpgaIrq;
 
-
-	if (irq >= NUM_EXTERNAL_IRQS) return;
-	if (!fpgaIrqTable[irq].mapped) return;
+	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
+		return;
+	if (unlikely(!fpgaIrqTable[irq].mapped))
+		return;
 
 	pri = 15 - irq;
 
 	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
 	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
 
-		/* disable interrupts */
-	local_irq_save(flags);
-
-		/* set priority for the interrupt */
+	/* set priority for the interrupt */
 	priorities = ctrl_inl(priorityReg);
 	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
 	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
 	ctrl_outl(priorities, priorityReg);
 
-		/* enable interupts on the FPGA INTC register */
+	/* enable interupts on the FPGA INTC register */
 	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-
-		/* restore interrupts */
-	local_irq_restore(flags);
 }
 
 	/* This functions sets the desired irq handler to be a MicroDev type */
@@ -158,9 +145,7 @@ static void mask_and_ack_microdev(unsigned int irq)
 static void end_microdev_irq(unsigned int irq)
 {
 	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-	{
 		enable_microdev_irq(irq);
-	}
 }
 
 extern void __init init_microdev_irq(void)
@@ -171,9 +156,7 @@ extern void __init init_microdev_irq(void)
 	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
 
 	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
-	{
 		make_microdev_irq(i);
-	}
 }
 
 extern void microdev_print_fpga_intc_status(void)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 61b402a3f5d..031c814e6e7 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -10,7 +10,6 @@
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
  */
-
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
@@ -21,41 +20,6 @@
 
 extern void microdev_heartbeat(void);
 
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
-	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
-
-	.mv_inb			= microdev_inb,
-	.mv_inw			= microdev_inw,
-	.mv_inl			= microdev_inl,
-	.mv_outb		= microdev_outb,
-	.mv_outw		= microdev_outw,
-	.mv_outl		= microdev_outl,
-
-	.mv_inb_p		= microdev_inb_p,
-	.mv_inw_p		= microdev_inw_p,
-	.mv_inl_p		= microdev_inl_p,
-	.mv_outb_p		= microdev_outb_p,
-	.mv_outw_p		= microdev_outw_p,
-	.mv_outl_p		= microdev_outl_p,
-
-	.mv_insb		= microdev_insb,
-	.mv_insw		= microdev_insw,
-	.mv_insl		= microdev_insl,
-	.mv_outsb		= microdev_outsb,
-	.mv_outsw		= microdev_outsw,
-	.mv_outsl		= microdev_outsl,
-
-	.mv_init_irq		= init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= microdev_heartbeat,
-#endif
-};
-ALIAS_MV(sh4202_microdev)
 
 /****************************************************************************/
 
@@ -113,11 +77,6 @@ ALIAS_MV(sh4202_microdev)
 	/* assume a Keyboard Controller is present */
 int microdev_kbd_controller_present = 1;
 
-const char *get_system_type(void)
-{
-	return "SH4-202 MicroDev";
-}
-
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start		= 0x300,
@@ -291,25 +250,9 @@ static int __init microdev_devices_setup(void)
 	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
 }
 
-__initcall(microdev_devices_setup);
-
-void __init platform_setup(void)
-{
-	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
-	const int fpgaRevision = *fpgaRevisionRegister;
-	int * const CacheControlRegister = (int*)CCR;
-
-	printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
-		get_system_type(), fpgaRevision, *CacheControlRegister);
-}
-
-
-/****************************************************************************/
-
-
-	/*
-	 * Setup for the SMSC FDC37C93xAPM
-	 */
+/*
+ * Setup for the SMSC FDC37C93xAPM
+ */
 static int __init smsc_superio_setup(void)
 {
 
@@ -412,8 +355,52 @@ static int __init smsc_superio_setup(void)
 	return 0;
 }
 
+static void __init microdev_setup(char **cmdline_p)
+{
+	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
+	const int fpgaRevision = *fpgaRevisionRegister;
+	int * const CacheControlRegister = (int*)CCR;
+
+	device_initcall(microdev_devices_setup);
+	device_initcall(smsc_superio_setup);
 
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
+	printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
+		get_system_type(), fpgaRevision, *CacheControlRegister);
+}
+
+/*
+ * The Machine Vector
  */
-__initcall(smsc_superio_setup);
+struct sh_machine_vector mv_sh4202_microdev __initmv = {
+	.mv_name		= "SH4-202 MicroDev",
+	.mv_setup		= microdev_setup,
+	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
+
+	.mv_inb			= microdev_inb,
+	.mv_inw			= microdev_inw,
+	.mv_inl			= microdev_inl,
+	.mv_outb		= microdev_outb,
+	.mv_outw		= microdev_outw,
+	.mv_outl		= microdev_outl,
+
+	.mv_inb_p		= microdev_inb_p,
+	.mv_inw_p		= microdev_inw_p,
+	.mv_inl_p		= microdev_inl_p,
+	.mv_outb_p		= microdev_outb_p,
+	.mv_outw_p		= microdev_outw_p,
+	.mv_outl_p		= microdev_outl_p,
+
+	.mv_insb		= microdev_insb,
+	.mv_insw		= microdev_insw,
+	.mv_insl		= microdev_insl,
+	.mv_outsb		= microdev_outsb,
+	.mv_outsw		= microdev_outsw,
+	.mv_outsl		= microdev_outsl,
+
+	.mv_init_irq		= init_microdev_irq,
+
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= microdev_heartbeat,
+#endif
+};
+ALIAS_MV(sh4202_microdev)
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/titan/Makefile
new file mode 100644
index 00000000000..08d75370006
--- /dev/null
+++ b/arch/sh/boards/titan/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Nimble Microsystems TITAN specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/titan/io.c
new file mode 100644
index 00000000000..4730c1dd697
--- /dev/null
+++ b/arch/sh/boards/titan/io.c
@@ -0,0 +1,126 @@
+/*
+ *	I/O routines for Titan
+ */
+#include <linux/pci.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+
+static inline unsigned int port2adr(unsigned int port)
+{
+        maybebadio((unsigned long)port);
+        return port;
+}
+
+u8 titan_inb(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inb(port);
+        else if (is_pci_ioaddr(port))
+                return ctrl_inb(pci_ioaddr(port));
+        return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 titan_inb_p(unsigned long port)
+{
+        u8 v;
+
+        if (PXSEG(port))
+                v = ctrl_inb(port);
+        else if (is_pci_ioaddr(port))
+                v = ctrl_inb(pci_ioaddr(port));
+        else
+                v = ctrl_inw(port2adr(port)) & 0xff;
+        ctrl_delay();
+        return v;
+}
+
+u16 titan_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inw(port);
+        else if (is_pci_ioaddr(port))
+                return ctrl_inw(pci_ioaddr(port));
+        else if (port >= 0x2000)
+                return ctrl_inw(port2adr(port));
+        else
+                maybebadio(port);
+        return 0;
+}
+
+u32 titan_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return ctrl_inl(port);
+        else if (is_pci_ioaddr(port))
+                return ctrl_inl(pci_ioaddr(port));
+        else if (port >= 0x2000)
+                return ctrl_inw(port2adr(port));
+        else
+                maybebadio(port);
+        return 0;
+}
+
+void titan_outb(u8 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outb(value, port);
+        else if (is_pci_ioaddr(port))
+                ctrl_outb(value, pci_ioaddr(port));
+        else
+                ctrl_outw(value, port2adr(port));
+}
+
+void titan_outb_p(u8 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outb(value, port);
+        else if (is_pci_ioaddr(port))
+                ctrl_outb(value, pci_ioaddr(port));
+        else
+                ctrl_outw(value, port2adr(port));
+        ctrl_delay();
+}
+
+void titan_outw(u16 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outw(value, port);
+        else if (is_pci_ioaddr(port))
+                ctrl_outw(value, pci_ioaddr(port));
+        else if (port >= 0x2000)
+                ctrl_outw(value, port2adr(port));
+        else
+                maybebadio(port);
+}
+
+void titan_outl(u32 value, unsigned long port)
+{
+        if (PXSEG(port))
+                ctrl_outl(value, port);
+        else if (is_pci_ioaddr(port))
+                ctrl_outl(value, pci_ioaddr(port));
+        else
+                maybebadio(port);
+}
+
+void titan_insl(unsigned long port, void *dst, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void titan_outsl(unsigned long port, const void *src, unsigned long count)
+{
+        maybebadio(port);
+}
+
+void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
+{
+	if (PXSEG(port) || is_pci_memaddr(port))
+		return (void __iomem *)port;
+	else if (is_pci_ioaddr(port))
+		return (void __iomem *)pci_ioaddr(port);
+
+	return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
new file mode 100644
index 00000000000..52b66d8b8d2
--- /dev/null
+++ b/arch/sh/boards/titan/setup.c
@@ -0,0 +1,48 @@
+/*
+ *	Setup for Titan
+ */
+
+#include <linux/init.h>
+#include <asm/irq.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+
+extern void __init pcibios_init_platform(void);
+
+static void __init init_titan_irq(void)
+{
+	/* enable individual interrupt mode for externals */
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+
+	make_ipr_irq( TITAN_IRQ_WAN,   IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */
+	make_ipr_irq( TITAN_IRQ_LAN,   IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */
+	make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */
+	make_ipr_irq( TITAN_IRQ_USB,   IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */
+}
+
+struct sh_machine_vector mv_titan __initmv = {
+	.mv_name =	"Titan",
+
+	.mv_inb =	titan_inb,
+	.mv_inw =	titan_inw,
+	.mv_inl =	titan_inl,
+	.mv_outb =	titan_outb,
+	.mv_outw =	titan_outw,
+	.mv_outl =	titan_outl,
+
+	.mv_inb_p =	titan_inb_p,
+	.mv_inw_p =	titan_inw,
+	.mv_inl_p =	titan_inl,
+	.mv_outb_p =	titan_outb_p,
+	.mv_outw_p =	titan_outw,
+	.mv_outl_p =	titan_outl,
+
+	.mv_insl =	titan_insl,
+	.mv_outsl =	titan_outsl,
+
+	.mv_ioport_map = titan_ioport_map,
+
+	.mv_init_irq =	init_titan_irq,
+	.mv_init_pci =	pcibios_init_platform,
+};
+ALIAS_MV(titan)
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index c5e4ed10876..1c941370a2e 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -14,19 +14,8 @@
  */
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/irq.h>
 
 struct sh_machine_vector mv_unknown __initmv = {
-	.mv_nr_irqs		= NR_IRQS,
+	.mv_name		= "Unknown",
 };
 ALIAS_MV(unknown)
-
-const char *get_system_type(void)
-{
-	return "Unknown";
-}
-
-void __init platform_setup(void)
-{
-}
-
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 75a6876bf6c..e5f44379007 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -18,13 +18,20 @@ endif
 # Assign dummy values if these 2 variables are not defined,
 # in order to suppress error message.
 #
+CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START     ?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-IMAGE_OFFSET := $(shell printf "0x%8x" $$[0x80000000+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)])
+
+IMAGE_OFFSET	:= $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET)  + \
+					      $(CONFIG_MEMORY_START) + \
+					      $(CONFIG_BOOT_LINK_OFFSET)])
+
+LIBGCC	:= $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
 
 LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
 
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 155d139884c..0582ca8346b 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -65,6 +65,11 @@ config HD64461_IRQ
 
 	  Do not change this unless you know what you are doing.
 
+config HD64461_IOBASE
+	hex "HD64461 start address"
+	depends on HD64461
+	default "0xb0000000"
+
 config HD64461_ENABLER
 	bool "HD64461 PCMCIA enabler"
 	depends on HD64461
@@ -73,7 +78,6 @@ config HD64461_ENABLER
 	  via the HD64461 companion chip.
 	  Otherwise, say N.
 
-
 config HD64465_IOBASE
 	hex "HD64465 start address"
 	depends on HD64465
diff --git a/arch/sh/cchips/hd6446x/hd64461/io.c b/arch/sh/cchips/hd6446x/hd64461/io.c
index ac3062671db..7909a1b7b51 100644
--- a/arch/sh/cchips/hd6446x/hd64461/io.c
+++ b/arch/sh/cchips/hd6446x/hd64461/io.c
@@ -1,11 +1,10 @@
 /*
- *	$Id: io.c,v 1.6 2004/03/16 00:07:50 lethal Exp $
  *	Copyright (C) 2000 YAEGASHI Takeshi
  *	Typical I/O routines for HD64461 system.
  */
 
 #include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
+#include <asm/hd64461.h>
 
 #define MEM_BASE (CONFIG_HD64461_IOBASE - HD64461_STBCR)
 
@@ -54,11 +53,6 @@ static __inline__ unsigned long PORT2ADDR(unsigned long port)
 	return 0xa0000000 + (port & 0x1fffffff);
 }
 
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 unsigned char hd64461_inb(unsigned long port)
 {
 	return *(volatile unsigned char*)PORT2ADDR(port);
@@ -67,7 +61,7 @@ unsigned char hd64461_inb(unsigned long port)
 unsigned char hd64461_inb_p(unsigned long port)
 {
 	unsigned long v = *(volatile unsigned char*)PORT2ADDR(port);
-	delay();
+	ctrl_delay();
 	return v;
 }
 
@@ -89,7 +83,7 @@ void hd64461_outb(unsigned char b, unsigned long port)
 void hd64461_outb_p(unsigned char b, unsigned long port)
 {
 	*(volatile unsigned char*)PORT2ADDR(port) = b;
-	delay();
+	ctrl_delay();
 }
 
 void hd64461_outw(unsigned short b, unsigned long port)
@@ -144,13 +138,13 @@ void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count)
 	while(count--) *addr=*buf++;
 }
 
-unsigned short hd64461_readw(unsigned long addr)
+unsigned short hd64461_readw(void __iomem *addr)
 {
-	return *(volatile unsigned short*)(MEM_BASE+addr);
+	return ctrl_inw(MEM_BASE+(unsigned long __force)addr);
 }
 
-void hd64461_writew(unsigned short b, unsigned long addr)
+void hd64461_writew(unsigned short b, void __iomem *addr)
 {
-	*(volatile unsigned short*)(MEM_BASE+addr) = b;
+	ctrl_outw(b, MEM_BASE+(unsigned long __force)addr);
 }
 
diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c
index ad126016720..38f1e8171a3 100644
--- a/arch/sh/cchips/hd6446x/hd64461/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64461/setup.c
@@ -11,36 +11,28 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/io.h>
 #include <asm/irq.h>
-
-#include <asm/hd64461/hd64461.h>
+#include <asm/hd64461.h>
 
 static void disable_hd64461_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
 
-	local_irq_save(flags);
 	nimr = inw(HD64461_NIMR);
 	nimr |= mask;
 	outw(nimr, HD64461_NIMR);
-	local_irq_restore(flags);
 }
 
 static void enable_hd64461_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64461_IRQBASE);
 
-	local_irq_save(flags);
 	nimr = inw(HD64461_NIMR);
 	nimr &= ~mask;
 	outw(nimr, HD64461_NIMR);
-	local_irq_restore(flags);
 }
 
 static void mask_and_ack_hd64461(unsigned int irq)
diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c
index d2b2851bc44..30573d3e196 100644
--- a/arch/sh/cchips/hd6446x/hd64465/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64465/setup.c
@@ -25,31 +25,25 @@
 
 static void disable_hd64465_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
 
     	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
-	local_irq_save(flags);
 	nimr = inw(HD64465_REG_NIMR);
 	nimr |= mask;
 	outw(nimr, HD64465_REG_NIMR);
-	local_irq_restore(flags);
 }
 
 
 static void enable_hd64465_irq(unsigned int irq)
 {
-	unsigned long flags;
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
 
     	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
-	local_irq_save(flags);
 	nimr = inw(HD64465_REG_NIMR);
 	nimr &= ~mask;
 	outw(nimr, HD64465_REG_NIMR);
-	local_irq_restore(flags);
 }
 
 
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index 0dc1fb8f968..392c8b12ce3 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -32,37 +32,30 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/rts7751r2d/voyagergx_reg.h>
+#include <asm/voyagergx.h>
 
 static void disable_voyagergx_irq(unsigned int irq)
 {
-	unsigned long flags, val;
-	unsigned long  mask = 1 << (irq - VOYAGER_IRQ_BASE);
+	unsigned long val;
+	unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
     	pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
-	local_irq_save(flags);
         val = inl(VOYAGER_INT_MASK);
         val &= ~mask;
         outl(val, VOYAGER_INT_MASK);
-	local_irq_restore(flags);
 }
 
-
 static void enable_voyagergx_irq(unsigned int irq)
 {
-        unsigned long flags, val;
-        unsigned long  mask = 1 << (irq - VOYAGER_IRQ_BASE);
+        unsigned long val;
+        unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
         pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
-        local_irq_save(flags);
         val = inl(VOYAGER_INT_MASK);
         val |= mask;
         outl(val, VOYAGER_INT_MASK);
-        local_irq_restore(flags);
 }
 
-
 static void mask_and_ack_voyagergx(unsigned int irq)
 {
 	disable_voyagergx_irq(irq);
@@ -95,7 +88,8 @@ static struct hw_interrupt_type voyagergx_irq_type = {
 	.end = end_voyagergx_irq,
 };
 
-static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t voyagergx_interrupt(int irq, void *dev_id,
+				      struct pt_regs *regs)
 {
 	printk(KERN_INFO
 	       "VoyagerGX: spurious interrupt, status: 0x%x\n",
@@ -103,9 +97,6 @@ static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *re
 	return IRQ_HANDLED;
 }
 
-
-/*====================================================*/
-
 static struct {
 	int (*func)(int, void *);
 	void *dev;
diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c
index 139ca88ac9e..66b2fedd7ad 100644
--- a/arch/sh/cchips/voyagergx/setup.c
+++ b/arch/sh/cchips/voyagergx/setup.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/rts7751r2d/voyagergx_reg.h>
+#include <asm/voyagergx.h>
 
 static int __init setup_voyagergx(void)
 {
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
new file mode 100644
index 00000000000..6b43316d03c
--- /dev/null
+++ b/arch/sh/configs/landisk_defconfig
@@ -0,0 +1,1373 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.13-sh
+# Sun Sep 11 13:00:46 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+CONFIG_KEXEC=y
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_IDEDMA_ONLYDISK=y
+CONFIG_BLK_DEV_AEC62XX=y
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_IDE_SH=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NE2000 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_RS5C313_RTC=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FONT_8x16=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_OBSOLETE_OSS_USB_DRIVER=y
+CONFIG_USB_AUDIO=m
+# CONFIG_USB_BLUETOOTH_TTY is not set
+CONFIG_USB_MIDI=m
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+CONFIG_UFS_FS_WRITE=y
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_FRAME_POINTER is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig
new file mode 100644
index 00000000000..d597fc57154
--- /dev/null
+++ b/arch/sh/configs/r7780rp_defconfig
@@ -0,0 +1,1099 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-sh
+# Sat Jan  7 19:47:53 2006
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R77703DRP is not set
+CONFIG_SH_R7780RP=y
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_32BIT=y
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=32000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+CONFIG_PREEMPT=y
+# CONFIG_SMP is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDE_SATA=y
+CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=m
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=m
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=m
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=m
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_IDE_SH=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NE2000=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/configs/se73180_defconfig b/arch/sh/configs/se73180_defconfig
index d217e44c89a..fe19feb95ca 100644
--- a/arch/sh/configs/se73180_defconfig
+++ b/arch/sh/configs/se73180_defconfig
@@ -78,6 +78,7 @@ CONFIG_SH_73180_SOLUTION_ENGINE=y
 # CONFIG_SH_SECUREEDGE5410 is not set
 # CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
 # CONFIG_SH_EDOSK7705 is not set
 # CONFIG_SH_SH4202_MICRODEV is not set
 # CONFIG_SH_UNKNOWN is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
new file mode 100644
index 00000000000..948e507b52b
--- /dev/null
+++ b/arch/sh/configs/se7343_defconfig
@@ -0,0 +1,997 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Aug  7 20:14:44 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+CONFIG_SH_7343_SOLUTION_ENGINE=y
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_32BIT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=27000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SH7343=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Encoders and Decoders
+#
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_MIXER_OSS is not set
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SuperH devices
+#
+CONFIG_SH7343_SIU=m
+CONFIG_AK4537_CODEC=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
new file mode 100644
index 00000000000..ec9a3034daa
--- /dev/null
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -0,0 +1,913 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Aug  7 17:07:06 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+CONFIG_SH_7710VOIPGW=y
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+CONFIG_CPU_SUBTYPE_SH7710=y
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=32768000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_U32=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SOLUTIONENGINE is not set
+CONFIG_MTD_SH7710VOIPGW=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+CONFIG_PHONE=y
+# CONFIG_PHONE_IXJ is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
new file mode 100644
index 00000000000..382b3bd3963
--- /dev/null
+++ b/arch/sh/configs/shmin_defconfig
@@ -0,0 +1,827 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Wed Aug  2 01:45:03 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PTRACE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_UID16 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+# CONFIG_SLAB is not set
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+CONFIG_SLOB=y
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7709_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_SHMIN=y
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+CONFIG_CPU_SUBTYPE_SH7706=y
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=32000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00210000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xa0000000
+CONFIG_MTD_PHYSMAP_LEN=0x80000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNWIND_INFO is not set
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
new file mode 100644
index 00000000000..1db2904de9e
--- /dev/null
+++ b/arch/sh/configs/titan_defconfig
@@ -0,0 +1,1367 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-sh
+# Wed Nov  9 00:35:56 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+CONFIG_SH_TITAN=y
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x08030000
+CONFIG_MEMORY_SIZE=0x7fd0000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_RTC=y
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=30000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=8
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x009e0000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+#CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_FWMARK is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+CONFIG_IP_ROUTE_MULTIPATH_RR=m
+CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_DRR=m
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TFTP=m
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_NET_CLS_IND=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_SSFDC=y
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+CONFIG_CASSINI=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NE2000 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+CONFIG_8139_OLD_RX_RESET=y
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 0f15216cd39..defc13c37d4 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -11,6 +11,8 @@ config SH_DMA
 config NR_ONCHIP_DMA_CHANNELS
 	depends on SH_DMA
 	int "Number of on-chip DMAC channels"
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
+	default "12" if CPU_SUBTYPE_SH7780
 	default "4"
 	help
 	  This allows you to specify the number of channels that the on-chip
@@ -52,4 +54,3 @@ config DMA_PAGE_OPS_CHANNEL
 	  are dual-address capable.
 
 endmenu
-
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0f866f8789f..9cb07092418 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -3,7 +3,7 @@
  *
  * G2 bus DMA support
  *
- * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003 - 2006  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-
+#include <asm/cacheflush.h>
 #include <asm/mach/sysasic.h>
 #include <asm/mach/dma.h>
 #include <asm/dma.h>
@@ -47,17 +47,31 @@ struct g2_dma_info {
 
 static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
 
+#define g2_bytes_remaining(i) \
+	((g2_dma->channel[i].size - \
+	  g2_dma->status[i].size) & 0x0fffffff)
+
 static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	/* FIXME: Do some meaningful completion work here.. */
-	return IRQ_HANDLED;
-}
+	int i;
 
-static struct irqaction g2_dma_irq = {
-	.name		= "g2 DMA handler",
-	.handler	= g2_dma_interrupt,
-	.flags		= IRQF_DISABLED,
-};
+	for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
+		if (g2_dma->status[i].status & 0x20000000) {
+			unsigned int bytes = g2_bytes_remaining(i);
+
+			if (likely(bytes == 0)) {
+				struct dma_info *info = dev_id;
+				struct dma_channel *chan = info->channels + i;
+
+				wake_up(&chan->wait_queue);
+
+				return IRQ_HANDLED;
+			}
+		}
+	}
+
+	return IRQ_NONE;
+}
 
 static int g2_enable_dma(struct dma_channel *chan)
 {
@@ -135,8 +149,14 @@ static int g2_xfer_dma(struct dma_channel *chan)
 	return 0;
 }
 
+static int g2_get_residue(struct dma_channel *chan)
+{
+	return g2_bytes_remaining(chan->chan);
+}
+
 static struct dma_ops g2_dma_ops = {
 	.xfer		= g2_xfer_dma,
+	.get_residue	= g2_get_residue,
 };
 
 static struct dma_info g2_dma_info = {
@@ -148,13 +168,22 @@ static struct dma_info g2_dma_info = {
 
 static int __init g2_dma_init(void)
 {
-	setup_irq(HW_EVENT_G2_DMA, &g2_dma_irq);
+	int ret;
+
+	ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+			  "g2 DMA handler", &g2_dma_info);
+	if (unlikely(ret))
+		return -EINVAL;
 
 	/* Magic */
 	g2_dma->wait_state	= 27;
 	g2_dma->magic		= 0x4659404f;
 
-	return register_dmac(&g2_dma_info);
+	ret = register_dmac(&g2_dma_info);
+	if (unlikely(ret != 0))
+		free_irq(HW_EVENT_G2_DMA, 0);
+
+	return ret;
 }
 
 static void __exit g2_dma_exit(void)
@@ -169,4 +198,3 @@ module_exit(g2_dma_exit);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
 MODULE_DESCRIPTION("G2 bus DMA driver");
 MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 30a580aa7cb..3b0b0f60bb3 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -18,8 +18,8 @@
 #include <asm/dma.h>
 #include <asm/io.h>
 
-static unsigned int xfer_complete = 0;
-static int count = 0;
+static unsigned int xfer_complete;
+static int count;
 
 static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
@@ -107,4 +107,3 @@ module_exit(pvr2_dma_exit);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
 MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
 MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index e028a2d2a4e..cbbe8bce3d6 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -11,14 +11,10 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/dreamcast/dma.h>
-#include <asm/signal.h>
-#include <asm/irq.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
@@ -84,18 +80,23 @@ static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs)
 
 static int sh_dmac_request_dma(struct dma_channel *chan)
 {
-	char name[32];
+	if (unlikely(!chan->flags & DMA_TEI_CAPABLE))
+		return 0;
 
-	snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)",
+	chan->name = kzalloc(32, GFP_KERNEL);
+	if (unlikely(chan->name == NULL))
+		return -ENOMEM;
+	snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)",
 		 chan->chan);
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, name, chan);
+			   IRQF_DISABLED, chan->name, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
 {
 	free_irq(get_dmte_irq(chan->chan), chan);
+	kfree(chan->name);
 }
 
 static void
@@ -259,7 +260,7 @@ static int __init sh_dmac_init(void)
 #ifdef CONFIG_CPU_SH4
 	make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
 	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
-	if (i < 0)
+	if (unlikely(i < 0))
 		return i;
 #endif
 
@@ -274,7 +275,7 @@ static int __init sh_dmac_init(void)
 	 * been set.
 	 */
 	i = dmaor_reset();
-	if (i < 0)
+	if (unlikely(i != 0))
 		return i;
 
 	return register_dmac(info);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 365bc16a4a8..9e00cb8a39e 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -6,7 +6,8 @@ obj-y					+= pci.o
 obj-$(CONFIG_PCI_AUTO)			+= pci-auto.o
 
 obj-$(CONFIG_CPU_SUBTYPE_ST40STB1)	+= pci-st40.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o 
+obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
 					   dma-dreamcast.o
@@ -14,3 +15,6 @@ obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
 obj-$(CONFIG_SH_BIGSUR)			+= ops-bigsur.o
 obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
+obj-$(CONFIG_SH_R7780RP)		+= ops-r7780rp.o fixups-r7780rp.o
+obj-$(CONFIG_SH_TITAN)			+= ops-titan.o
+obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index 63b1c6f4b8d..c0af5f7ef41 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -4,7 +4,7 @@
  * PCI fixups for the Sega Dreamcast
  *
  * Copyright (C) 2001, 2002  M. R. Brown
- * Copyright (C) 2002, 2003  Paul Mundt
+ * Copyright (C) 2002, 2003, 2006  Paul Mundt
  *
  * This file originally bore the message (with enclosed-$):
  *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
@@ -45,36 +45,16 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
 		printk("PCI: Failed resource fixup\n");
 	}
 }
-
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
 
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	/* 
-	 * We don't have any sub bus to fix up, and this is a rather
-	 * stupid place to put general device fixups. Don't do it.
-	 * Use the pcibios_fixups table or suffer the consequences.
+	/*
+	 * The interrupt routing semantics here are quite trivial.
+	 *
+	 * We basically only support one interrupt, so we only bother
+	 * updating a device's interrupt line with this single shared
+	 * interrupt. Keeps routing quite simple, doesn't it?
 	 */
+	return GAPSPCI_IRQ;
 }
-
-void __init pcibios_fixup_irqs(void)
-{
-	struct pci_dev *dev = 0;
-
-	for_each_pci_dev(dev) {
-		/*
-		 * The interrupt routing semantics here are quite trivial.
-		 *
-		 * We basically only support one interrupt, so we only bother
-		 * updating a device's interrupt line with this single shared
-		 * interrupt. Keeps routing quite simple, doesn't it?
-		 */
-		printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n",
-		       pci_name(dev));
-
-		dev->irq = GAPSPCI_IRQ;
-
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-}
-
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
new file mode 100644
index 00000000000..3e321df65d2
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -0,0 +1,45 @@
+/*
+ * arch/sh/drivers/pci/fixups-r7780rp.c
+ *
+ * Highlander R7780RP-1 PCI fixups
+ *
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+#include <asm/io.h>
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 0c590fc7a08..e72ceb560d5 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -10,8 +10,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include "pci-sh7751.h"
-#include <asm/io.h>
+#include "pci-sh4.h"
 
 #define PCIMCR_MRSET_OFF	0xBFFFFFFF
 #define PCIMCR_RFSH_OFF		0xFFFFFFFB
@@ -22,22 +21,23 @@ int pci_fixup_pcic(void)
 
 	bcr1 = inl(SH7751_BCR1);
 	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
-	outl(bcr1, PCI_REG(SH7751_PCIBCR1));
+	pci_write_reg(bcr1, SH4_PCIBCR1);
 
 	/* Enable all interrupts, so we known what to fix */
-	outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM));
-	outl(0x0000380f, PCI_REG(SH7751_PCIAINTM));
+	pci_write_reg(0x0000c3ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
 
-	outl(0xfb900047, PCI_REG(SH7751_PCICONF1));
-	outl(0xab000001, PCI_REG(SH7751_PCICONF4));
+	pci_write_reg(0xfb900047, SH7751_PCICONF1);
+	pci_write_reg(0xab000001, SH7751_PCICONF4);
 
 	mcr = inl(SH7751_MCR);
 	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-	outl(mcr, PCI_REG(SH7751_PCIMCR));
+	pci_write_reg(mcr, SH4_PCIMCR);
+
+	pci_write_reg(0x0c000000, SH7751_PCICONF5);
+	pci_write_reg(0xd0000000, SH7751_PCICONF6);
+	pci_write_reg(0x0c000000, SH4_PCILAR0);
+	pci_write_reg(0x00000000, SH4_PCILAR1);
 
-	outl(0x0c000000, PCI_REG(SH7751_PCICONF5));
-	outl(0xd0000000, PCI_REG(SH7751_PCICONF6));
-	outl(0x0c000000, PCI_REG(SH7751_PCILAR0));
-	outl(0x00000000, PCI_REG(SH7751_PCILAR1));
 	return 0;
 }
diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
index 57ac26c2171..2e8a18b7ee5 100644
--- a/arch/sh/drivers/pci/fixups-sh03.c
+++ b/arch/sh/drivers/pci/fixups-sh03.c
@@ -3,11 +3,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 
-/*
- * 	IRQ functions
- */
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
@@ -17,8 +13,9 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
 		case 8: return 5;	/* eth1       */
 		case 6: return 2;	/* PCI bridge */
 		default:
-                	printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
-                	return 2;
+			printk(KERN_ERR "PCI: Bad IRQ mapping request "
+					"for slot %d\n", slot);
+			return 2;
 		}
 	} else {
 		switch (pin) {
@@ -32,30 +29,3 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
 	}
 	return irq;
 }
-
-static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	/* no swizzling */
-	return PCI_SLOT(dev->devfn);
-}
-
-static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
-	irq = pcibios_map_platform_irq(slot, pin, dev);
-	if( irq < 0 ) {
-		pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
-		return irq;
-	}
-
-	pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
-	return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
-	pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq);
-}
diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c
index ae82c6ca05e..5da501bd77b 100644
--- a/arch/sh/drivers/pci/ops-bigsur.c
+++ b/arch/sh/drivers/pci/ops-bigsur.c
@@ -10,15 +10,12 @@
  *
  * PCI initialization for the Hitachi Big Sur Evaluation Board
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/pci.h>
-
 #include <asm/io.h>
-#include "pci-sh7751.h"
+#include "pci-sh4.h"
 #include <asm/bigsur/bigsur.h>
 
 #define BIGSUR_PCI_IO	0x4000
@@ -41,11 +38,11 @@ static struct resource sh7751_mem_resource = {
 extern struct pci_ops sh7751_pci_ops;
 
 struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
 	{ 0, }
 };
 
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
 	.window0	= {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= BIGSUR_LSR0_SIZE,
@@ -58,7 +55,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
 };
 
 /*
- * Initialize the Big Sur PCI interface 
+ * Initialize the Big Sur PCI interface
  * Setup hardware to be Central Funtion
  * Copy the BSR regs to the PCI interface
  * Setup PCI windows into local RAM
@@ -68,15 +65,15 @@ int __init pcibios_init_platform(void)
 	return sh7751_pcic_init(&sh7751_pci_map);
 }
 
-int pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-	/* 
+	/*
 	 * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
 	 * interface is on the wrong end of the board so that it can also
 	 * support a V320 CPI interface chip...  Therefor the IRQ mapping is
 	 * somewhat use dependent... I'l assume a linear map for now, i.e.
 	 * INTA=slot0,pin0... INTD=slot3,pin0...
-	 */ 
+	 */
 	int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
 
 	PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
@@ -84,4 +81,3 @@ int pcibios_map_platform_irq(u8 slot, u8 pin)
 
 	return irq;
 }
-
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c
new file mode 100644
index 00000000000..ada301c21fe
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-landisk.c
@@ -0,0 +1,68 @@
+/*
+ * arch/sh/drivers/pci/ops-landisk.c
+ *
+ * PCI initialization for the I-O DATA Device, Inc. LANDISK board
+ *
+ * Copyright (C) 2006 kogiidena
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static struct resource sh7751_io_resource = {
+	.name = "SH7751 IO",
+	.start = 0x4000,
+	.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
+	.flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+	.name = "SH7751 mem",
+	.start = SH7751_PCI_MEMORY_BASE,
+	.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+	.flags = IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
+	{NULL, NULL, NULL, 0, 0},
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+	.window0 = {
+		.base	= SH7751_CS3_BASE_ADDR,
+		.size	= (64 << 20),	/* 64MB */
+	},
+
+	.flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7751_pcic_init(&sh7751_pci_map);
+}
+
+int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	/*
+	 * slot0: pin1-4 = irq5,6,7,8
+	 * slot1: pin1-4 = irq6,7,8,5
+	 * slot2: pin1-4 = irq7,8,5,6
+	 * slot3: pin1-4 = irq8,5,6,7
+	 */
+	int irq = ((slot + pin - 1) & 0x3) + 5;
+
+	if ((slot | (pin - 1)) > 0x3) {
+		printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
+		       slot, pin - 1 + 'A');
+		return -1;
+	}
+	return irq;
+}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
new file mode 100644
index 00000000000..554d5ed2c58
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -0,0 +1,75 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+        switch (slot) {
+	case 0: return IRQ_PCISLOT1;		/* PCI Interrupt #1 */
+	case 1: return IRQ_PCISLOT2;		/* PCI Interrupt #2 */
+	case 2: return IRQ_PCISLOT3;		/* PCI Interrupt #3 */
+	case 3: return IRQ_PCISLOT4;		/* PCI Interrupt E4 */
+	default:
+		printk(KERN_ERR "PCI: Bad IRQ mapping "
+		       "request for slot %d, func %d\n", slot, pin-1);
+		return -1;
+	}
+}
+
+static struct resource sh7780_io_resource = {
+	.name	= "SH7780_IO",
+	.start	= 0x2000,
+	.end	= 0x2000 + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7780_mem_resource = {
+	.name	= "SH7780_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7780_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7780_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7780_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index 83171d10141..88f44e24542 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -17,12 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/module.h>
-
-#include <asm/io.h>
-#include "pci-sh7751.h"
 #include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
 
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
         switch (slot) {
 	case 0: return IRQ_PCISLOT1;	/* PCI Extend slot #1 */
@@ -52,12 +51,12 @@ static struct resource sh7751_mem_resource = {
 extern struct pci_ops sh7751_pci_ops;
 
 struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
 	{ NULL, NULL, NULL, 0, 0 },
 };
 EXPORT_SYMBOL(board_pci_channels);
 
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
 	.window0	= {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= 0x04000000,
@@ -68,7 +67,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
 		.size	= 0x00000000,	/* Unused */
 	},
 
-	.flags	= SH7751_PCIC_NO_RESET,
+	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
new file mode 100644
index 00000000000..2d4371009a5
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -0,0 +1,164 @@
+/*
+ * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
+ *
+ * Copyright (C) 2002 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+/*
+ * Direct access to PCI hardware...
+ */
+#define CONFIG_CMD(bus, devfn, where) \
+	P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static DEFINE_SPINLOCK(sh4_pci_lock);
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	unsigned long flags;
+	u32 data;
+
+	/*
+	 * PCIPDR may only be accessed as 32 bit words,
+	 * so we must do byte alignment by hand
+	 */
+	spin_lock_irqsave(&sh4_pci_lock, flags);
+	pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(SH4_PCIPDR);
+	spin_unlock_irqrestore(&sh4_pci_lock, flags);
+
+	switch (size) {
+	case 1:
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		*val = (data >> ((where & 2) << 3)) & 0xffff;
+		break;
+	case 4:
+		*val = data;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Since SH4 only does 32bit access we'll have to do a read,
+ * mask,write operation.
+ * We'll allow an odd byte offset, though it should be illegal.
+ */
+static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
+			 int where, int size, u32 val)
+{
+	unsigned long flags;
+	int shift;
+	u32 data;
+
+	spin_lock_irqsave(&sh4_pci_lock, flags);
+	pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+	data = pci_read_reg(SH4_PCIPDR);
+	spin_unlock_irqrestore(&sh4_pci_lock, flags);
+
+	switch (size) {
+	case 1:
+		shift = (where & 3) << 3;
+		data &= ~(0xff << shift);
+		data |= ((val & 0xff) << shift);
+		break;
+	case 2:
+		shift = (where & 2) << 3;
+		data &= ~(0xffff << shift);
+		data |= ((val & 0xffff) << shift);
+		break;
+	case 4:
+		data = val;
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	pci_write_reg(data, SH4_PCIPDR);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sh4_pci_ops = {
+	.read		= sh4_pci_read,
+	.write		= sh4_pci_write,
+};
+
+/*
+ * Not really related to pci_ops, but it's common and not worth shoving
+ * somewhere else for now..
+ */
+static unsigned int pci_probe = PCI_PROBE_CONF1;
+
+int __init sh4_pci_check_direct(void)
+{
+	/*
+	 * Check if configuration works.
+	 */
+	if (pci_probe & PCI_PROBE_CONF1) {
+		unsigned int tmp = pci_read_reg(SH4_PCIPAR);
+
+		pci_write_reg(P1SEG, SH4_PCIPAR);
+
+		if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
+			pci_write_reg(tmp, SH4_PCIPAR);
+			printk(KERN_INFO "PCI: Using configuration type 1\n");
+			request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
+
+			return 0;
+		}
+
+		pci_write_reg(tmp, SH4_PCIPAR);
+	}
+
+	pr_debug("PCI: pci_check_direct failed\n");
+	return -EINVAL;
+}
+
+/* Handle generic fixups */
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
+	 */
+	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+	pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
+	for(i = 0; i < 4; i++) {
+		struct resource *r = &d->resource[i];
+
+		if ((r->start & ~0x80) == 0x374) {
+			r->start |= 2;
+			r->end = r->start;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __init pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	}
+
+	return str;
+}
diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c
index 3cbd14dd28f..53dd893d4e5 100644
--- a/arch/sh/drivers/pci/ops-snapgear.c
+++ b/arch/sh/drivers/pci/ops-snapgear.c
@@ -2,7 +2,7 @@
  * arch/sh/drivers/pci/ops-snapgear.c
  *
  * Author:  David McCullough <davidm@snapgear.com>
- * 
+ *
  * Ported to new API by Paul Mundt <lethal@linux-sh.org>
  *
  * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
@@ -12,15 +12,11 @@
  *
  * PCI initialization for the SnapGear boards
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/pci.h>
-
-#include <asm/io.h>
-#include "pci-sh7751.h"
+#include "pci-sh4.h"
 
 #define SNAPGEAR_PCI_IO		0x4000
 #define SNAPGEAR_PCI_MEM	0xfd000000
@@ -43,14 +39,12 @@ static struct resource sh7751_mem_resource = {
 	.flags		= IORESOURCE_MEM,
 };
 
-extern struct pci_ops sh7751_pci_ops;
-
 struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
 	{ 0, }
 };
 
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
 	.window0	= {
 		.base	= SH7751_CS2_BASE_ADDR,
 		.size	= SNAPGEAR_LSR0_SIZE,
@@ -61,11 +55,11 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
 		.size	= SNAPGEAR_LSR1_SIZE,
 	},
 
-	.flags	= SH7751_PCIC_NO_RESET,
+	.flags	= SH4_PCIC_NO_RESET,
 };
 
 /*
- * Initialize the SnapGear PCI interface 
+ * Initialize the SnapGear PCI interface
  * Setup hardware to be Central Funtion
  * Copy the BSR regs to the PCI interface
  * Setup PCI windows into local RAM
@@ -75,7 +69,7 @@ int __init pcibios_init_platform(void)
 	return sh7751_pcic_init(&sh7751_pci_map);
 }
 
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	int irq = -1;
 
@@ -98,4 +92,3 @@ void __init pcibios_fixup(void)
 {
 	/* Nothing to fixup .. */
 }
-
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
new file mode 100644
index 00000000000..c6097bcd97f
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -0,0 +1,83 @@
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by  David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/titan.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	int irq = -1;
+
+	switch (slot) {
+	case 0: irq = TITAN_IRQ_WAN;   break;	/* eth0 (WAN) */
+	case 1: irq = TITAN_IRQ_LAN;   break;	/* eth1 (LAN) */
+	case 2: irq = TITAN_IRQ_MPCIA; break;	/* mPCI A */
+	case 3: irq = TITAN_IRQ_MPCIB; break;	/* mPCI B */
+	case 4: irq = TITAN_IRQ_USB;   break;	/* USB */
+	default:
+		printk(KERN_INFO "PCI: Bad IRQ mapping "
+				 "request for slot %d\n", slot);
+		return -1;
+	}
+
+	printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+		slot, pin - 1 + 'A', irq);
+
+	return irq;
+}
+
+static struct resource sh7751_io_resource = {
+	.name	= "SH7751_IO",
+	.start	= SH7751_PCI_IO_BASE,
+	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+	.name	= "SH7751_mem",
+	.start	= SH7751_PCI_MEMORY_BASE,
+	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+	.window0	= {
+		.base	= SH7751_CS2_BASE_ADDR,
+		.size	= SH7751_MEM_REGION_SIZE*2,	/* cs2 and cs3 */
+	},
+
+	.window1	= {
+		.base	= SH7751_CS2_BASE_ADDR,
+		.size	= SH7751_MEM_REGION_SIZE*2,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7751_pcic_init(&sh7751_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index 4cef4d1d8c8..ecf16344f94 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -45,11 +45,11 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 
-#undef	DEBUG
-#ifdef 	DEBUG
+#define	DEBUG
+#ifdef	DEBUG
 #define	DBG(x...)	printk(x)
 #else
-#define	DBG(x...)	
+#define	DBG(x...)
 #endif
 
 /*
@@ -102,7 +102,7 @@ static u32 pciauto_upper_iospc;
 static u32 pciauto_lower_memspc;
 static u32 pciauto_upper_memspc;
 
-static void __init 
+static void __init
 pciauto_setup_bars(struct pci_channel *hose,
 		   int top_bus,
 		   int current_bus,
@@ -116,7 +116,6 @@ pciauto_setup_bars(struct pci_channel *hose,
 	int found_mem64 = 0;
 
 	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
 		u32 bar_addr;
 
 		/* Read the old BAR value */
@@ -125,7 +124,6 @@ pciauto_setup_bars(struct pci_channel *hose,
 					pci_devfn,
 					bar,
 					&bar_addr);
-#endif
 
 		/* Tickle the BAR and get the response */
 		early_write_config_dword(hose, top_bus,
@@ -140,8 +138,7 @@ pciauto_setup_bars(struct pci_channel *hose,
 					bar,
 					&bar_response);
 
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
-		/* 
+		/*
 		 * Write the old BAR value back out, only update the BAR
 		 * if we implicitly want resources to be updated, which
 		 * is done by the generic code further down. -- PFM.
@@ -151,7 +148,6 @@ pciauto_setup_bars(struct pci_channel *hose,
 					 pci_devfn,
 					 bar,
 					 bar_addr);
-#endif
 
 		/* If BAR is not implemented go to the next BAR */
 		if (!bar_response)
@@ -177,7 +173,7 @@ retry:
 			    PCI_BASE_ADDRESS_MEM_TYPE_64)
 				found_mem64 = 1;
 
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;		
+			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
 			upper_limit = &pciauto_upper_memspc;
 			lower_limit = &pciauto_lower_memspc;
 			DBG("        Mem");
@@ -193,22 +189,22 @@ retry:
 		if ((bar_value + bar_size) > *upper_limit) {
 			if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 				if (io_resource_inuse->child) {
-					io_resource_inuse = 
+					io_resource_inuse =
 						io_resource_inuse->child;
-					pciauto_lower_iospc = 
+					pciauto_lower_iospc =
 						io_resource_inuse->start;
-					pciauto_upper_iospc = 
+					pciauto_upper_iospc =
 						io_resource_inuse->end + 1;
 					goto retry;
 				}
 
 			} else {
 				if (mem_resource_inuse->child) {
-					mem_resource_inuse = 
+					mem_resource_inuse =
 						mem_resource_inuse->child;
-					pciauto_lower_memspc = 
+					pciauto_lower_memspc =
 						mem_resource_inuse->start;
-					pciauto_upper_memspc = 
+					pciauto_upper_memspc =
 						mem_resource_inuse->end + 1;
 					goto retry;
 				}
@@ -230,7 +226,7 @@ retry:
 		 * If we are a 64-bit decoder then increment to the
 		 * upper 32 bits of the bar and force it to locate
 		 * in the lower 4GB of memory.
-		 */ 
+		 */
 		if (found_mem64) {
 			bar += 4;
 			early_write_config_dword(hose, top_bus,
@@ -362,7 +358,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
 {
 	u32 temp;
 
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
 	/*
 	 * [jsun] we always bump up baselines a little, so that if there
 	 * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
@@ -370,7 +365,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
 	 */
 	pciauto_lower_memspc += 1;
 	pciauto_lower_iospc += 1;
-#endif
 
 	/*
 	 * Configure subordinate bus number.  The PCI subsystem
@@ -396,11 +390,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
 	 * configured by this routine to happily live behind a
 	 * P2P bridge in a system.
 	 */
-#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D)
-	pciauto_lower_memspc += 0x00400000;
-	pciauto_lower_iospc += 0x00004000;
-#endif
-
 	/* Align memory and I/O to 4KB and 4 byte boundaries. */
 	pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
 		& ~(0x1000 - 1);
@@ -433,12 +422,12 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
 	int devfn_stop = 0xff;
 
 	sub_bus = current_bus;
-	
+
 	if (hose->first_devfn)
 		devfn_start = hose->first_devfn;
 	if (hose->last_devfn)
 		devfn_stop = hose->last_devfn;
-	
+
 	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
 
 		if (PCI_FUNC(pci_devfn) && !found_multi)
@@ -471,9 +460,6 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
 		if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
 			DBG("        Bridge: primary=%.2x, secondary=%.2x\n",
 				current_bus, sub_bus + 1);
-#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D)
-			pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1);
-#endif
 			pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
 						     pci_devfn, sub_bus);
 			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
@@ -490,10 +476,10 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
 			DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
 			/* Place CardBus Socket/ExCA registers */
 			pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
- 
+
 			pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
 					current_bus, pci_devfn, sub_bus);
- 
+
 			DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
 				sub_bus + 1,
 				pciauto_lower_iospc, pciauto_lower_memspc);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
new file mode 100644
index 00000000000..5a61d6041f2
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -0,0 +1,180 @@
+#ifndef __PCI_SH4_H
+#define __PCI_SH4_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#include "pci-sh7780.h"
+#else
+#include "pci-sh7751.h"
+#endif
+
+#include <asm/io.h>
+
+/* startup values */
+#define PCI_PROBE_BIOS		1
+#define PCI_PROBE_CONF1		2
+#define PCI_PROBE_CONF2		4
+#define PCI_NO_SORT		0x100
+#define PCI_BIOS_SORT		0x200
+#define PCI_NO_CHECKS		0x400
+#define PCI_ASSIGN_ROMS		0x1000
+#define PCI_BIOS_IRQ_SCAN	0x2000
+
+#define SH4_PCICR		0x100		/* PCI Control Register */
+  #define SH4_PCICR_PREFIX	  0xA5000000	/* CR prefix for write */
+  #define SH4_PCICR_FTO		  0x00000400	/* TRDY/IRDY Enable */
+  #define SH4_PCICR_TRSB	  0x00000200	/* Target Read Single */
+  #define SH4_PCICR_BSWP	  0x00000100	/* Target Byte Swap */
+  #define SH4_PCICR_PLUP	  0x00000080	/* Enable PCI Pullup */
+  #define SH4_PCICR_ARBM	  0x00000040	/* PCI Arbitration Mode */
+  #define SH4_PCICR_MD		  0x00000030	/* MD9 and MD10 status */
+  #define SH4_PCICR_SERR	  0x00000008	/* SERR output assert */
+  #define SH4_PCICR_INTA	  0x00000004	/* INTA output assert */
+  #define SH4_PCICR_PRST	  0x00000002	/* PCI Reset Assert */
+  #define SH4_PCICR_CFIN	  0x00000001	/* Central Fun. Init Done */
+#define SH4_PCILSR0		0x104		/* PCI Local Space Register0 */
+#define SH4_PCILSR1		0x108		/* PCI Local Space Register1 */
+#define SH4_PCILAR0		0x10C		/* PCI Local Addr Register1 */
+#define SH4_PCILAR1		0x110		/* PCI Local Addr Register1 */
+#define SH4_PCIINT		0x114		/* PCI Interrupt Register */
+  #define SH4_PCIINT_MLCK	  0x00008000	/* Master Lock Error */
+  #define SH4_PCIINT_TABT	  0x00004000	/* Target Abort Error */
+  #define SH4_PCIINT_TRET	  0x00000200	/* Target Retry Error */
+  #define SH4_PCIINT_MFDE	  0x00000100	/* Master Func. Disable Error */
+  #define SH4_PCIINT_PRTY	  0x00000080	/* Address Parity Error */
+  #define SH4_PCIINT_SERR	  0x00000040	/* SERR Detection Error */
+  #define SH4_PCIINT_TWDP	  0x00000020	/* Tgt. Write Parity Error */
+  #define SH4_PCIINT_TRDP	  0x00000010	/* Tgt. Read Parity Err Det. */
+  #define SH4_PCIINT_MTABT	  0x00000008	/* Master-Tgt. Abort Error */
+  #define SH4_PCIINT_MMABT	  0x00000004	/* Master-Master Abort Error */
+  #define SH4_PCIINT_MWPD	  0x00000002	/* Master Write PERR Detect */
+  #define SH4_PCIINT_MRPD	  0x00000001	/* Master Read PERR Detect */
+#define SH4_PCIINTM		0x118		/* PCI Interrupt Mask */
+#define SH4_PCIALR		0x11C		/* Error Address Register */
+#define SH4_PCICLR		0x120		/* Error Command/Data */
+  #define SH4_PCICLR_MPIO	  0x80000000
+  #define SH4_PCICLR_MDMA0	  0x40000000	/* DMA0 Transfer Error */
+  #define SH4_PCICLR_MDMA1	  0x20000000	/* DMA1 Transfer Error */
+  #define SH4_PCICLR_MDMA2	  0x10000000	/* DMA2 Transfer Error */
+  #define SH4_PCICLR_MDMA3	  0x08000000	/* DMA3 Transfer Error */
+  #define SH4_PCICLR_TGT	  0x04000000	/* Target Transfer Error */
+  #define SH4_PCICLR_CMDL	  0x0000000F	/* PCI Command at Error */
+#define SH4_PCIAINT		0x130		/* Arbiter Interrupt Register */
+  #define SH4_PCIAINT_MBKN	  0x00002000	/* Master Broken Interrupt */
+  #define SH4_PCIAINT_TBTO	  0x00001000	/* Target Bus Time Out */
+  #define SH4_PCIAINT_MBTO	  0x00001000	/* Master Bus Time Out */
+  #define SH4_PCIAINT_TABT	  0x00000008	/* Target Abort */
+  #define SH4_PCIAINT_MABT	  0x00000004	/* Master Abort */
+  #define SH4_PCIAINT_RDPE	  0x00000002	/* Read Data Parity Error */
+  #define SH4_PCIAINT_WDPE	  0x00000001	/* Write Data Parity Error */
+#define SH4_PCIAINTM            0x134		/* Arbiter Int. Mask Register */
+#define SH4_PCIBMLR		0x138		/* Error Bus Master Register */
+  #define SH4_PCIBMLR_REQ4	  0x00000010	/* REQ4 bus master at error */
+  #define SH4_PCIBMLR_REQ3	  0x00000008	/* REQ3 bus master at error */
+  #define SH4_PCIBMLR_REQ2	  0x00000004	/* REQ2 bus master at error */
+  #define SH4_PCIBMLR_REQ1	  0x00000002	/* REQ1 bus master at error */
+  #define SH4_PCIBMLR_REQ0	  0x00000001	/* REQ0 bus master at error */
+#define SH4_PCIDMABT		0x140		/* DMA Transfer Arb. Register */
+  #define SH4_PCIDMABT_RRBN	  0x00000001	/* DMA Arbitor Round-Robin */
+#define SH4_PCIDPA0		0x180		/* DMA0 Transfer Addr. */
+#define SH4_PCIDLA0		0x184		/* DMA0 Local Addr. */
+#define SH4_PCIDTC0		0x188		/* DMA0 Transfer Cnt. */
+#define SH4_PCIDCR0		0x18C		/* DMA0 Control Register */
+  #define SH4_PCIDCR_ALGN	  0x00000600	/* DMA Alignment Mode */
+  #define SH4_PCIDCR_MAST	  0x00000100	/* DMA Termination Type */
+  #define SH4_PCIDCR_INTM	  0x00000080	/* DMA Interrupt Done Mask*/
+  #define SH4_PCIDCR_INTS	  0x00000040	/* DMA Interrupt Done Status */
+  #define SH4_PCIDCR_LHLD	  0x00000020	/* Local Address Control */
+  #define SH4_PCIDCR_PHLD	  0x00000010	/* PCI Address Control*/
+  #define SH4_PCIDCR_IOSEL	  0x00000008	/* PCI Address Space Type */
+  #define SH4_PCIDCR_DIR	  0x00000004	/* DMA Transfer Direction */
+  #define SH4_PCIDCR_STOP	  0x00000002	/* Force DMA Stop */
+  #define SH4_PCIDCR_STRT	  0x00000001	/* DMA Start */
+#define SH4_PCIDPA1		0x190		/* DMA1 Transfer Addr. */
+#define SH4_PCIDLA1		0x194		/* DMA1 Local Addr. */
+#define SH4_PCIDTC1		0x198		/* DMA1 Transfer Cnt. */
+#define SH4_PCIDCR1		0x19C		/* DMA1 Control Register */
+#define SH4_PCIDPA2		0x1A0		/* DMA2 Transfer Addr. */
+#define SH4_PCIDLA2		0x1A4		/* DMA2 Local Addr. */
+#define SH4_PCIDTC2		0x1A8		/* DMA2 Transfer Cnt. */
+#define SH4_PCIDCR2		0x1AC		/* DMA2 Control Register */
+#define SH4_PCIDPA3		0x1B0		/* DMA3 Transfer Addr. */
+#define SH4_PCIDLA3		0x1B4		/* DMA3 Local Addr. */
+#define SH4_PCIDTC3		0x1B8		/* DMA3 Transfer Cnt. */
+#define SH4_PCIDCR3		0x1BC		/* DMA3 Control Register */
+#define SH4_PCIPAR		0x1C0		/* PIO Address Register */
+  #define SH4_PCIPAR_CFGEN	  0x80000000	/* Configuration Enable */
+  #define SH4_PCIPAR_BUSNO	  0x00FF0000	/* Config. Bus Number */
+  #define SH4_PCIPAR_DEVNO	  0x0000FF00	/* Config. Device Number */
+  #define SH4_PCIPAR_REGAD	  0x000000FC	/* Register Address Number */
+#define SH4_PCIMBR		0x1C4		/* Memory Base Address */
+  #define SH4_PCIMBR_MASK	  0xFF000000	/* Memory Space Mask */
+  #define SH4_PCIMBR_LOCK	  0x00000001	/* Lock Memory Space */
+#define SH4_PCIIOBR		0x1C8		/* I/O Base Address Register */
+  #define SH4_PCIIOBR_MASK	  0xFFFC0000	/* IO Space Mask */
+  #define SH4_PCIIOBR_LOCK	  0x00000001	/* Lock IO Space */
+#define SH4_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
+  #define SH4_PCIPINT_D3	  0x00000002	/* D3 Pwr Mgmt. Interrupt */
+  #define SH4_PCIPINT_D0	  0x00000001	/* D0 Pwr Mgmt. Interrupt */
+#define SH4_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
+#define SH4_PCICLKR		0x1D4		/* Clock Ctrl. Register */
+  #define SH4_PCICLKR_PCSTP	  0x00000002	/* PCI Clock Stop */
+  #define SH4_PCICLKR_BCSTP	  0x00000001	/* BCLK Clock Stop */
+/* For definitions of BCR, MCR see ... */
+#define SH4_PCIBCR1		0x1E0		/* Memory BCR1 Register */
+  #define SH4_PCIMBR0		SH4_PCIBCR1
+#define SH4_PCIBCR2		0x1E4		/* Memory BCR2 Register */
+  #define SH4_PCIMBMR0		SH4_PCIBCR2
+#define SH4_PCIWCR1		0x1E8		/* Wait Control 1 Register */
+#define SH4_PCIWCR2		0x1EC		/* Wait Control 2 Register */
+#define SH4_PCIWCR3		0x1F0		/* Wait Control 3 Register */
+  #define SH4_PCIMBR2		SH4_PCIWCR3
+#define SH4_PCIMCR		0x1F4		/* Memory Control Register */
+#define SH4_PCIBCR3		0x1f8		/* Memory BCR3 Register */
+#define SH4_PCIPCTR             0x200		/* Port Control Register */
+  #define SH4_PCIPCTR_P2EN	  0x000400000	/* Port 2 Enable */
+  #define SH4_PCIPCTR_P1EN	  0x000200000	/* Port 1 Enable */
+  #define SH4_PCIPCTR_P0EN	  0x000100000	/* Port 0 Enable */
+  #define SH4_PCIPCTR_P2UP	  0x000000020	/* Port2 Pull Up Enable */
+  #define SH4_PCIPCTR_P2IO	  0x000000010	/* Port2 Output Enable */
+  #define SH4_PCIPCTR_P1UP	  0x000000008	/* Port1 Pull Up Enable */
+  #define SH4_PCIPCTR_P1IO	  0x000000004	/* Port1 Output Enable */
+  #define SH4_PCIPCTR_P0UP	  0x000000002	/* Port0 Pull Up Enable */
+  #define SH4_PCIPCTR_P0IO	  0x000000001	/* Port0 Output Enable */
+#define SH4_PCIPDTR		0x204		/* Port Data Register */
+  #define SH4_PCIPDTR_PB5	  0x000000020	/* Port 5 Enable */
+  #define SH4_PCIPDTR_PB4	  0x000000010	/* Port 4 Enable */
+  #define SH4_PCIPDTR_PB3	  0x000000008	/* Port 3 Enable */
+  #define SH4_PCIPDTR_PB2	  0x000000004	/* Port 2 Enable */
+  #define SH4_PCIPDTR_PB1	  0x000000002	/* Port 1 Enable */
+  #define SH4_PCIPDTR_PB0	  0x000000001	/* Port 0 Enable */
+#define SH4_PCIPDR		0x220		/* Port IO Data Register */
+
+/* Flags */
+#define SH4_PCIC_NO_RESET	0x0001
+
+/* arch/sh/kernel/drivers/pci/ops-sh4.c */
+extern struct pci_ops sh4_pci_ops;
+int sh4_pci_check_direct(void);
+int pci_fixup_pcic(void);
+
+struct sh4_pci_address_space {
+	unsigned long base;
+	unsigned long size;
+};
+
+struct sh4_pci_address_map {
+	struct sh4_pci_address_space window0;
+	struct sh4_pci_address_space window1;
+	unsigned long flags;
+};
+
+static inline void pci_write_reg(unsigned long val, unsigned long reg)
+{
+	outl(val, PCI_REG(reg));
+}
+
+static inline unsigned long pci_read_reg(unsigned long reg)
+{
+	return inl(PCI_REG(reg));
+}
+#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 682f3dae305..dbe83788498 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -15,180 +15,14 @@
 
 #undef DEBUG
 
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
+#include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
-
-#include <asm/machvec.h>
+#include "pci-sh4.h"
+#include <asm/addrspace.h>
 #include <asm/io.h>
-#include "pci-sh7751.h"
-
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-extern int pci_fixup_pcic(void);
-
-void pcibios_fixup_irqs(void) __attribute__ ((weak));
-
-/*
- * Direct access to PCI hardware...
- */
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh7751_pci_read(struct pci_bus *bus, unsigned int devfn,
-			   int where, int size, u32 *val)
-{
-	unsigned long flags;
-	u32 data;
-
-	/* 
-	 * PCIPDR may only be accessed as 32 bit words, 
-	 * so we must do byte alignment by hand 
-	 */
-	local_irq_save(flags);
-	outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
-	data = inl(PCI_REG(SH7751_PCIPDR));
-	local_irq_restore(flags);
-
-	switch (size) {
-	case 1:
-		*val = (data >> ((where & 3) << 3)) & 0xff;
-		break;
-	case 2:
-		*val = (data >> ((where & 2) << 3)) & 0xffff;
-		break;
-	case 4:
-		*val = data;
-		break;
-	default:
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* 
- * Since SH7751 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */ 
-static int sh7751_pci_write(struct pci_bus *bus, unsigned int devfn,
-			    int where, int size, u32 val)
-{
-	unsigned long flags;
-	int shift;
-	u32 data;
-
-	local_irq_save(flags);
-	outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
-	data = inl(PCI_REG(SH7751_PCIPDR));
-	local_irq_restore(flags);
-
-	switch (size) {
-	case 1:
-		shift = (where & 3) << 3;
-		data &= ~(0xff << shift);
-		data |= ((val & 0xff) << shift);
-		break;
-	case 2:
-		shift = (where & 2) << 3;
-		data &= ~(0xffff << shift);
-		data |= ((val & 0xffff) << shift);
-		break;
-	case 4:
-		data = val;
-		break;
-	default:
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	}
-
-	outl(data, PCI_REG(SH7751_PCIPDR));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-struct pci_ops sh7751_pci_ops = {
-	.read 		= sh7751_pci_read,
-	.write		= sh7751_pci_write,
-};
-
-static int __init pci_check_direct(void)
-{
-	unsigned int tmp, id;
-
-	/* check for SH7751/SH7751R hardware */
-	id = inl(SH7751_PCIREG_BASE+SH7751_PCICONF0);
-	if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
-	    id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
-		pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
-		return -ENODEV;
-	}
-
-	/*
-	 * Check if configuration works.
-	 */
-	if (pci_probe & PCI_PROBE_CONF1) {
-		tmp = inl (PCI_REG(SH7751_PCIPAR));
-		outl (0x80000000, PCI_REG(SH7751_PCIPAR));
-		if (inl (PCI_REG(SH7751_PCIPAR)) == 0x80000000) {
-			outl (tmp, PCI_REG(SH7751_PCIPAR));
-			printk(KERN_INFO "PCI: Using configuration type 1\n");
-			request_region(PCI_REG(SH7751_PCIPAR), 8, "PCI conf1");
-			return 0;
-		}
-		outl (tmp, PCI_REG(SH7751_PCIPAR));
-	}
-
-	pr_debug("PCI: pci_check_direct failed\n");
-	return -EINVAL;
-}
-
-/***************************************************************************************/
-
-/*
- *  Handle bus scanning and fixups ....
- */
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-
-void __init pcibios_fixup_bus(struct pci_bus *b)
-{
-	pci_read_bridge_bases(b);
-}
 
 /*
  * Initialization. Try all known PCI access methods. Note that we support
@@ -196,25 +30,29 @@ void __init pcibios_fixup_bus(struct pci_bus *b)
  * to access config space.
  * 
  * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it
- * exitst and via the platform defined function pcibios_init_platform().  
- * See pci_bigsur.c for implementation;
- * 
- * The BIOS version of the pci functions is not yet implemented but it is left
- * in for completeness.  Currently an error will be genereated at compile time. 
+ * space mapping) will be called via the platform defined function
+ * pcibios_init_platform().
  */
-
 static int __init sh7751_pci_init(void)
 {
+	unsigned int id;
 	int ret;
 
 	pr_debug("PCI: Starting intialization.\n");
-	if ((ret = pci_check_direct()) != 0)
+
+	/* check for SH7751/SH7751R hardware */
+	id = pci_read_reg(SH7751_PCICONF0);
+	if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+	    id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+		pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+		return -ENODEV;
+	}
+
+	if ((ret = sh4_pci_check_direct()) != 0)
 		return ret;
 
 	return pcibios_init_platform();
 }
-
 subsys_initcall(sh7751_pci_init);
 
 static int __init __area_sdram_check(unsigned int area)
@@ -223,26 +61,26 @@ static int __init __area_sdram_check(unsigned int area)
 
 	word = inl(SH7751_BCR1);
 	/* check BCR for SDRAM in area */
-	if(((word >> area) & 1) == 0) {
+	if (((word >> area) & 1) == 0) {
 		printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
 		       area, word);
 		return 0;
 	}
-	outl(word, PCI_REG(SH7751_PCIBCR1));
+	pci_write_reg(word, SH4_PCIBCR1);
 
 	word = (u16)inw(SH7751_BCR2);
 	/* check BCR2 for 32bit SDRAM interface*/
-	if(((word >> (area << 1)) & 0x3) != 0x3) {
+	if (((word >> (area << 1)) & 0x3) != 0x3) {
 		printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
 		       area, word);
 		return 0;
 	}
-	outl(word, PCI_REG(SH7751_PCIBCR2));
+	pci_write_reg(word, SH4_PCIBCR2);
 
 	return 1;
 }
 
-int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
+int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 {
 	u32 reg;
 	u32 word;
@@ -251,39 +89,39 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
 	reg = inl(SH7751_BCR1);
 	reg |= 0x80000;
 	outl(reg, SH7751_BCR1);
-	
+
 	/* Turn the clocks back on (not done in reset)*/
-	outl(0, PCI_REG(SH7751_PCICLKR));
+	pci_write_reg(0, SH4_PCICLKR);
 	/* Clear Powerdown IRQ's (not done in reset) */
-	word = SH7751_PCIPINT_D3 | SH7751_PCIPINT_D0;
-	outl(word, PCI_REG(SH7751_PCIPINT));
+	word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
+	pci_write_reg(word, SH4_PCIPINT);
 
 	/*
 	 * This code is unused for some boards as it is done in the
 	 * bootloader and doing it here means the MAC addresses loaded
 	 * by the bootloader get lost.
 	 */
-	if (!(map->flags & SH7751_PCIC_NO_RESET)) {
+	if (!(map->flags & SH4_PCIC_NO_RESET)) {
 		/* toggle PCI reset pin */
-		word = SH7751_PCICR_PREFIX | SH7751_PCICR_PRST;
-		outl(word,PCI_REG(SH7751_PCICR));
+		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
+		pci_write_reg(word, SH4_PCICR);
 		/* Wait for a long time... not 1 sec. but long enough */
 		mdelay(100);
-		word = SH7751_PCICR_PREFIX;
-		outl(word,PCI_REG(SH7751_PCICR));
+		word = SH4_PCICR_PREFIX;
+		pci_write_reg(word, SH4_PCICR);
 	}
-	
+
 	/* set the command/status bits to:
 	 * Wait Cycle Control + Parity Enable + Bus Master +
 	 * Mem space enable
 	 */
 	word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | 
 	       SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
-	outl(word, PCI_REG(SH7751_PCICONF1));
+	pci_write_reg(word, SH7751_PCICONF1);
 
 	/* define this host as the host bridge */
-	word = SH7751_PCI_HOST_BRIDGE << 24;
-	outl(word, PCI_REG(SH7751_PCICONF2));
+	word = PCI_BASE_CLASS_BRIDGE << 24;
+	pci_write_reg(word, SH7751_PCICONF2);
 
 	/* Set IO and Mem windows to local address 
 	 * Make PCI and local address the same for easy 1 to 1 mapping 
@@ -291,46 +129,49 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
 	 * Window1 = map->window1.size @ cached area base = SDRAM 
 	 */
 	word = map->window0.size - 1;
-	outl(word, PCI_REG(SH7751_PCILSR0));
+	pci_write_reg(word, SH4_PCILSR0);
 	word = map->window1.size - 1;
-	outl(word, PCI_REG(SH7751_PCILSR1));
+	pci_write_reg(word, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
 	word = P2SEGADDR(map->window0.base);
-	outl(word, PCI_REG(SH7751_PCILAR0));
-	outl(word, PCI_REG(SH7751_PCICONF5));
+	pci_write_reg(word, SH4_PCILAR0);
+	pci_write_reg(word, SH7751_PCICONF5);
 	/* Set the values on window 1 PCI config registers */
 	word =  PHYSADDR(map->window1.base);
-	outl(word, PCI_REG(SH7751_PCILAR1));
-	outl(word, PCI_REG(SH7751_PCICONF6));
+	pci_write_reg(word, SH4_PCILAR1);
+	pci_write_reg(word, SH7751_PCICONF6);
 
-	/* Set the local 16MB PCI memory space window to 
+	/* Set the local 16MB PCI memory space window to
 	 * the lowest PCI mapped address
 	 */
-	word = PCIBIOS_MIN_MEM & SH7751_PCIMBR_MASK;
-	PCIDBG(2,"PCI: Setting upper bits of Memory window to 0x%x\n", word);
-	outl(word , PCI_REG(SH7751_PCIMBR));
+	word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+	pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
+	pci_write_reg(word , SH4_PCIMBR);
 
 	/* Map IO space into PCI IO window
 	 * The IO window is 64K-PCIBIOS_MIN_IO in size
-	 * IO addresses will be translated to the 
+	 * IO addresses will be translated to the
 	 * PCI IO window base address
 	 */
-	PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO,
-	    (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO);
+	pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
+		 PCIBIOS_MIN_IO, (64 << 10),
+		 SH4_PCI_IO_BASE + PCIBIOS_MIN_IO);
 
-	/* 
+	/*
 	 * XXX: For now, leave this board-specific. In the event we have other
 	 * boards that need to do similar work, this can be wrapped.
 	 */
 #ifdef CONFIG_SH_BIGSUR
-	bigsur_port_map(PCIBIOS_MIN_IO, (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO,0);
+	bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10),
+			SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0);
 #endif
 
-	/* Make sure the MSB's of IO window are set to access PCI space correctly */
-	word = PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK;
-	PCIDBG(2,"PCI: Setting upper bits of IO window to 0x%x\n", word);
-	outl(word, PCI_REG(SH7751_PCIIOBR));
-	
+	/* Make sure the MSB's of IO window are set to access PCI space
+	 * correctly */
+	word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+	pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
+	pci_write_reg(word, SH4_PCIIOBR);
+
 	/* Set PCI WCRx, BCRx's, copy from BSC locations */
 
 	/* check BCR for SDRAM in specified area */
@@ -349,13 +190,13 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
 
 	/* configure the wait control registers */
 	word = inl(SH7751_WCR1);
-	outl(word, PCI_REG(SH7751_PCIWCR1));
+	pci_write_reg(word, SH4_PCIWCR1);
 	word = inl(SH7751_WCR2);
-	outl(word, PCI_REG(SH7751_PCIWCR2));
+	pci_write_reg(word, SH4_PCIWCR2);
 	word = inl(SH7751_WCR3);
-	outl(word, PCI_REG(SH7751_PCIWCR3));
+	pci_write_reg(word, SH4_PCIWCR3);
 	word = inl(SH7751_MCR);
-	outl(word, PCI_REG(SH7751_PCIMCR));
+	pci_write_reg(word, SH4_PCIMCR);
 
 	/* NOTE: I'm ignoring the PCI error IRQs for now..
 	 * TODO: add support for the internal error interrupts and
@@ -368,49 +209,8 @@ int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
 
 	/* SH7751 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
-	word = SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN | SH7751_PCICR_ARBM;
-	outl(word,PCI_REG(SH7751_PCICR)); 
+	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
+	pci_write_reg(word, SH4_PCICR);
 
 	return 1;
 }
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "off")) {
-		pci_probe = 0;
-		return NULL;
-	}
-
-	return str;
-}
-
-/* 
- * 	IRQ functions 
- */
-static u8 __init sh7751_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	/* no swizzling */
-	return PCI_SLOT(dev->devfn);
-}
-
-static int sh7751_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
-	irq = pcibios_map_platform_irq(slot,pin);
-	if( irq < 0 ) {
-		pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
-		return irq;
-	}
-
-	pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
-	return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
-	pci_fixup_irqs(sh7751_no_swizzle, sh7751_pci_lookup_irq);
-}
-
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 1fee5cae10d..68e3cb5e6be 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -3,7 +3,7 @@
  *
  *  Dustin McIntire (dustin@sensoria.com) (c) 2001
  *  Paul Mundt (lethal@linux-sh.org) (c) 2003
- *	
+ *
  *  May be copied or modified under the terms of the GNU General Public
  *  License.  See linux/COPYING for more information.
  *
@@ -12,28 +12,6 @@
 #ifndef _PCI_SH7751_H_
 #define _PCI_SH7751_H_
 
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS 1
-#define PCI_PROBE_CONF1 2
-#define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
-#define PCI_NO_CHECKS 0x400
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
 /* Platform Specific Values */
 #define SH7751_VENDOR_ID             0x1054
 #define SH7751_DEVICE_ID             0x3505
@@ -128,131 +106,6 @@
   #define SH7751_PCICONF17_PMEN      0x00010000  /* PME Enable */
   #define SH7751_PCICONF17_PWST      0x00000003  /* Power State */
 /* SH7715 Internal PCI Registers */
-#define SH7751_PCICR               0x100         /* PCI Control Register */
-  #define SH7751_PCICR_PREFIX        0xA5000000  /* CR prefix for write */
-  #define SH7751_PCICR_TRSB          0x00000200  /* Target Read Single */
-  #define SH7751_PCICR_BSWP          0x00000100  /* Target Byte Swap */
-  #define SH7751_PCICR_PLUP          0x00000080  /* Enable PCI Pullup */
-  #define SH7751_PCICR_ARBM          0x00000040  /* PCI Arbitration Mode */
-  #define SH7751_PCICR_MD            0x00000030  /* MD9 and MD10 status */
-  #define SH7751_PCICR_SERR          0x00000008  /* SERR output assert */
-  #define SH7751_PCICR_INTA          0x00000004  /* INTA output assert */
-  #define SH7751_PCICR_PRST          0x00000002  /* PCI Reset Assert */
-  #define SH7751_PCICR_CFIN          0x00000001  /* Central Fun. Init Done */
-#define SH7751_PCILSR0             0x104         /* PCI Local Space Register0 */
-#define SH7751_PCILSR1             0x108         /* PCI Local Space Register1 */
-#define SH7751_PCILAR0             0x10C         /* PCI Local Address Register1 */
-#define SH7751_PCILAR1             0x110         /* PCI Local Address Register1 */
-#define SH7751_PCIINT              0x114         /* PCI Interrupt Register */
-  #define SH7751_PCIINT_MLCK         0x00008000  /* Master Lock Error */
-  #define SH7751_PCIINT_TABT         0x00004000  /* Target Abort Error */
-  #define SH7751_PCIINT_TRET         0x00000200  /* Target Retry Error */
-  #define SH7751_PCIINT_MFDE         0x00000100  /* Master Func. Disable Error */
-  #define SH7751_PCIINT_PRTY         0x00000080  /* Address Parity Error */
-  #define SH7751_PCIINT_SERR         0x00000040  /* SERR Detection Error */
-  #define SH7751_PCIINT_TWDP         0x00000020  /* Tgt. Write Parity Error */
-  #define SH7751_PCIINT_TRDP         0x00000010  /* Tgt. Read Parity Error Det. */
-  #define SH7751_PCIINT_MTABT        0x00000008  /* Master-Tgt. Abort Error */
-  #define SH7751_PCIINT_MMABT        0x00000004  /* Master-Master Abort Error */
-  #define SH7751_PCIINT_MWPD         0x00000002  /* Master Write PERR Detect */
-  #define SH7751_PCIINT_MRPD         0x00000002  /* Master Read PERR Detect */
-#define SH7751_PCIINTM             0x118         /* PCI Interrupt Mask Register */
-#define SH7751_PCIALR              0x11C         /* Error Address Register */
-#define SH7751_PCICLR              0x120         /* Error Command/Data Register */
-  #define SH7751_PCICLR_MPIO         0x80000000  /* Error Command/Data Register */
-  #define SH7751_PCICLR_MDMA0        0x40000000  /* DMA0 Transfer Error */
-  #define SH7751_PCICLR_MDMA1        0x20000000  /* DMA1 Transfer Error */
-  #define SH7751_PCICLR_MDMA2        0x10000000  /* DMA2 Transfer Error */
-  #define SH7751_PCICLR_MDMA3        0x08000000  /* DMA3 Transfer Error */
-  #define SH7751_PCICLR_TGT          0x04000000  /* Target Transfer Error */
-  #define SH7751_PCICLR_CMDL         0x0000000F  /* PCI Command at Error */
-#define SH7751_PCIAINT             0x130         /* Arbiter Interrupt Register */
-  #define SH7751_PCIAINT_MBKN        0x00002000  /* Master Broken Interrupt */
-  #define SH7751_PCIAINT_TBTO        0x00001000  /* Target Bus Time Out */
-  #define SH7751_PCIAINT_MBTO        0x00001000  /* Master Bus Time Out */
-  #define SH7751_PCIAINT_TABT        0x00000008  /* Target Abort */
-  #define SH7751_PCIAINT_MABT        0x00000004  /* Master Abort */
-  #define SH7751_PCIAINT_RDPE        0x00000002  /* Read Data Parity Error */
-  #define SH7751_PCIAINT_WDPE        0x00000002  /* Write Data Parity Error */
-#define SH7751_PCIAINTM            0x134         /* Arbiter Int. Mask Register */
-#define SH7751_PCIBMLR             0x138         /* Error Bus Master Register */
-  #define SH7751_PCIBMLR_REQ4        0x00000010  /* REQ4 bus master at error */
-  #define SH7751_PCIBMLR_REQ3        0x00000008  /* REQ3 bus master at error */
-  #define SH7751_PCIBMLR_REQ2        0x00000004  /* REQ2 bus master at error */
-  #define SH7751_PCIBMLR_REQ1        0x00000002  /* REQ1 bus master at error */
-  #define SH7751_PCIBMLR_REQ0        0x00000001  /* REQ0 bus master at error */
-#define SH7751_PCIDMABT            0x140         /* DMA Transfer Arb. Register */
-  #define SH7751_PCIDMABT_RRBN       0x00000001  /* DMA Arbitor Round-Robin */
-#define SH7751_PCIDPA0             0x180         /* DMA0 Transfer Addr. Register */
-#define SH7751_PCIDLA0             0x184         /* DMA0 Local Addr. Register */
-#define SH7751_PCIDTC0             0x188         /* DMA0 Transfer Cnt. Register */
-#define SH7751_PCIDCR0             0x18C         /* DMA0 Control Register */
-  #define SH7751_PCIDCR_ALGN         0x00000600  /* DMA Alignment Mode */
-  #define SH7751_PCIDCR_MAST         0x00000100  /* DMA Termination Type */
-  #define SH7751_PCIDCR_INTM         0x00000080  /* DMA Interrupt Done Mask*/
-  #define SH7751_PCIDCR_INTS         0x00000040  /* DMA Interrupt Done Status */
-  #define SH7751_PCIDCR_LHLD         0x00000020  /* Local Address Control */
-  #define SH7751_PCIDCR_PHLD         0x00000010  /* PCI Address Control*/
-  #define SH7751_PCIDCR_IOSEL        0x00000008  /* PCI Address Space Type */
-  #define SH7751_PCIDCR_DIR          0x00000004  /* DMA Transfer Direction */
-  #define SH7751_PCIDCR_STOP         0x00000002  /* Force DMA Stop */
-  #define SH7751_PCIDCR_STRT         0x00000001  /* DMA Start */
-#define SH7751_PCIDPA1             0x190         /* DMA1 Transfer Addr. Register */
-#define SH7751_PCIDLA1             0x194         /* DMA1 Local Addr. Register */
-#define SH7751_PCIDTC1             0x198         /* DMA1 Transfer Cnt. Register */
-#define SH7751_PCIDCR1             0x19C         /* DMA1 Control Register */
-#define SH7751_PCIDPA2             0x1A0         /* DMA2 Transfer Addr. Register */
-#define SH7751_PCIDLA2             0x1A4         /* DMA2 Local Addr. Register */
-#define SH7751_PCIDTC2             0x1A8         /* DMA2 Transfer Cnt. Register */
-#define SH7751_PCIDCR2             0x1AC         /* DMA2 Control Register */
-#define SH7751_PCIDPA3             0x1B0         /* DMA3 Transfer Addr. Register */
-#define SH7751_PCIDLA3             0x1B4         /* DMA3 Local Addr. Register */
-#define SH7751_PCIDTC3             0x1B8         /* DMA3 Transfer Cnt. Register */
-#define SH7751_PCIDCR3             0x1BC         /* DMA3 Control Register */
-#define SH7751_PCIPAR              0x1C0         /* PIO Address Register */
-  #define SH7751_PCIPAR_CFGEN        0x80000000  /* Configuration Enable */
-  #define SH7751_PCIPAR_BUSNO        0x00FF0000  /* Config. Bus Number */
-  #define SH7751_PCIPAR_DEVNO        0x0000FF00  /* Config. Device Number */
-  #define SH7751_PCIPAR_REGAD        0x000000FC  /* Register Address Number */
-#define SH7751_PCIMBR              0x1C4         /* Memory Base Address Register */
-  #define SH7751_PCIMBR_MASK         0xFF000000  /* Memory Space Mask */
-  #define SH7751_PCIMBR_LOCK         0x00000001  /* Lock Memory Space */
-#define SH7751_PCIIOBR             0x1C8         /* I/O Base Address Register */
-  #define SH7751_PCIIOBR_MASK         0xFFFC0000 /* IO Space Mask */
-  #define SH7751_PCIIOBR_LOCK         0x00000001 /* Lock IO Space */
-#define SH7751_PCIPINT             0x1CC         /* Power Mgmnt Int. Register */
-  #define SH7751_PCIPINT_D3           0x00000002 /* D3 Pwr Mgmt. Interrupt */
-  #define SH7751_PCIPINT_D0           0x00000001 /* D0 Pwr Mgmt. Interrupt */  
-#define SH7751_PCIPINTM            0x1D0         /* Power Mgmnt Mask Register */
-#define SH7751_PCICLKR             0x1D4         /* Clock Ctrl. Register */
-  #define SH7751_PCICLKR_PCSTP        0x00000002 /* PCI Clock Stop */
-  #define SH7751_PCICLKR_BCSTP        0x00000002 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH7751_PCIBCR1             0x1E0         /* Memory BCR1 Register */
-#define SH7751_PCIBCR2             0x1E4         /* Memory BCR2 Register */
-#define SH7751_PCIWCR1             0x1E8         /* Wait Control 1 Register */
-#define SH7751_PCIWCR2             0x1EC         /* Wait Control 2 Register */
-#define SH7751_PCIWCR3             0x1F0         /* Wait Control 3 Register */
-#define SH7751_PCIMCR              0x1F4         /* Memory Control Register */
-#define SH7751_PCIBCR3		   0x1f8	 /* Memory BCR3 Register */
-#define SH7751_PCIPCTR             0x200         /* Port Control Register */
-  #define SH7751_PCIPCTR_P2EN        0x000400000 /* Port 2 Enable */
-  #define SH7751_PCIPCTR_P1EN        0x000200000 /* Port 1 Enable */
-  #define SH7751_PCIPCTR_P0EN        0x000100000 /* Port 0 Enable */
-  #define SH7751_PCIPCTR_P2UP        0x000000020 /* Port2 Pull Up Enable */
-  #define SH7751_PCIPCTR_P2IO        0x000000010 /* Port2 Output Enable */
-  #define SH7751_PCIPCTR_P1UP        0x000000008 /* Port1 Pull Up Enable */
-  #define SH7751_PCIPCTR_P1IO        0x000000004 /* Port1 Output Enable */
-  #define SH7751_PCIPCTR_P0UP        0x000000002 /* Port0 Pull Up Enable */
-  #define SH7751_PCIPCTR_P0IO        0x000000001 /* Port0 Output Enable */
-#define SH7751_PCIPDTR             0x204         /* Port Data Register */
-  #define SH7751_PCIPDTR_PB5         0x000000020 /* Port 5 Enable */
-  #define SH7751_PCIPDTR_PB4         0x000000010 /* Port 4 Enable */
-  #define SH7751_PCIPDTR_PB3         0x000000008 /* Port 3 Enable */
-  #define SH7751_PCIPDTR_PB2         0x000000004 /* Port 2 Enable */
-  #define SH7751_PCIPDTR_PB1         0x000000002 /* Port 1 Enable */
-  #define SH7751_PCIPDTR_PB0         0x000000001 /* Port 0 Enable */
-#define SH7751_PCIPDR              0x220         /* Port IO Data Register */
 
 /* Memory Control Registers */
 #define SH7751_BCR1                0xFF800000    /* Memory BCR1 Register */
@@ -274,30 +127,9 @@
 #define SH7751_CS5_BASE_ADDR       (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
 #define SH7751_CS6_BASE_ADDR       (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
 
-/* General PCI values */
-#define SH7751_PCI_HOST_BRIDGE		0x6
-
-/* Flags */
-#define SH7751_PCIC_NO_RESET	0x0001
-
-/* External functions defined per platform i.e. Big Sur, SE... (these could be routed 
- * through the machine vectors... */
-extern int pcibios_init_platform(void);
-extern int pcibios_map_platform_irq(u8 slot, u8 pin);
-
-struct sh7751_pci_address_space {
-	unsigned long base;
-	unsigned long size;
-};
-
-struct sh7751_pci_address_map {
-	struct sh7751_pci_address_space window0;
-	struct sh7751_pci_address_space window1;
-	unsigned long flags;
-};
+struct sh4_pci_address_map;
 
 /* arch/sh/drivers/pci/pci-sh7751.c */
-extern int sh7751_pcic_init(struct sh7751_pci_address_map *map);
+int sh7751_pcic_init(struct sh4_pci_address_map *map);
 
 #endif /* _PCI_SH7751_H_ */
-
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
new file mode 100644
index 00000000000..bd3064a8208
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -0,0 +1,139 @@
+/*
+ *	Low-Level PCI Support for the SH7780
+ *
+ *  Dustin McIntire (dustin@sensoria.com)
+ *	Derived from arch/i386/kernel/pci-*.c which bore the message:
+ *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
+ *
+ *  Ported to the new API by Paul Mundt <lethal@linux-sh.org>
+ *  With cleanup by Paul van Gool <pvangool@mimotech.com>
+ *
+ *  May be copied or modified under the terms of the GNU General Public
+ *  License.  See linux/COPYING for more information.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include "pci-sh4.h"
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space.
+ *
+ * Note that the platform specific initialization (BSC registers, and memory
+ * space mapping) will be called via the platform defined function
+ * pcibios_init_platform().
+ */
+static int __init sh7780_pci_init(void)
+{
+	unsigned int id;
+	int ret;
+
+	pr_debug("PCI: Starting intialization.\n");
+
+	outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
+
+	/* check for SH7780/SH7780R hardware */
+	id = pci_read_reg(SH7780_PCIVID);
+	if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
+	    (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
+		printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
+		return -ENODEV;
+	}
+
+	/* Setup the INTC */
+	ctrl_outl(0x00200000, INTC_ICR0);	/* INTC SH-4 Mode */
+	ctrl_outl(0x00078000, INTC_INT2MSKCR);	/* enable PCIINTA - PCIINTD */
+	ctrl_outl(0x40000000, INTC_INTMSK1);	/* disable IRL4-7 Interrupt */
+	ctrl_outl(0x0000fffe, INTC_INTMSK2);	/* disable IRL4-7 Interrupt */
+	ctrl_outl(0x80000000, INTC_INTMSKCLR1);	/* enable IRL0-3 Interrupt */
+	ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);	/* enable IRL0-3 Interrupt */
+
+	if ((ret = sh4_pci_check_direct()) != 0)
+		return ret;
+
+	return pcibios_init_platform();
+}
+core_initcall(sh7780_pci_init);
+
+int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
+{
+	u32 word;
+
+	/*
+	 * This code is unused for some boards as it is done in the
+	 * bootloader and doing it here means the MAC addresses loaded
+	 * by the bootloader get lost.
+	 */
+	if (!(map->flags & SH4_PCIC_NO_RESET)) {
+		/* toggle PCI reset pin */
+		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
+		pci_write_reg(word, SH4_PCICR);
+		/* Wait for a long time... not 1 sec. but long enough */
+		mdelay(100);
+		word = SH4_PCICR_PREFIX;
+		pci_write_reg(word, SH4_PCICR);
+	}
+
+	/* set the command/status bits to:
+	 * Wait Cycle Control + Parity Enable + Bus Master +
+	 * Mem space enable
+	 */
+	pci_write_reg(0x00000046, SH7780_PCICMD);
+
+	/* define this host as the host bridge */
+	word = PCI_BASE_CLASS_BRIDGE << 24;
+	pci_write_reg(word, SH7780_PCIRID);
+
+	/* Set IO and Mem windows to local address
+	 * Make PCI and local address the same for easy 1 to 1 mapping
+	 * Window0 = map->window0.size @ non-cached area base = SDRAM
+	 * Window1 = map->window1.size @ cached area base = SDRAM
+	 */
+	word = ((map->window0.size - 1) & 0x1ff00001) | 0x01;
+	pci_write_reg(0x07f00001, SH4_PCILSR0);
+	word = ((map->window1.size - 1) & 0x1ff00001) | 0x01;
+	pci_write_reg(0x00000001, SH4_PCILSR1);
+	/* Set the values on window 0 PCI config registers */
+	word = P2SEGADDR(map->window0.base);
+	pci_write_reg(0xa8000000, SH4_PCILAR0);
+	pci_write_reg(0x08000000, SH7780_PCIMBAR0);
+	/* Set the values on window 1 PCI config registers */
+	word = P2SEGADDR(map->window1.base);
+	pci_write_reg(0x00000000, SH4_PCILAR1);
+	pci_write_reg(0x00000000, SH7780_PCIMBAR1);
+
+	/* Map IO space into PCI IO window
+	 * The IO window is 64K-PCIBIOS_MIN_IO in size
+	 * IO addresses will be translated to the
+	 * PCI IO window base address
+	 */
+	pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
+		 PCIBIOS_MIN_IO, (64 << 10),
+		 SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
+
+	/* NOTE: I'm ignoring the PCI error IRQs for now..
+	 * TODO: add support for the internal error interrupts and
+	 * DMA interrupts...
+	 */
+
+#ifdef CONFIG_SH_R7780RP
+	pci_fixup_pcic();
+#endif
+
+	/* SH7780 init done, set central function init complete */
+	/* use round robin mode to stop a device starving/overruning */
+	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
+	pci_write_reg(word, SH4_PCICR);
+
+	return 1;
+}
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
new file mode 100644
index 00000000000..f02d2180a4b
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -0,0 +1,94 @@
+/*
+ *	Low-Level PCI Support for SH7780 targets
+ *
+ *  Dustin McIntire (dustin@sensoria.com) (c) 2001
+ *  Paul Mundt (lethal@linux-sh.org) (c) 2003
+ *
+ *  May be copied or modified under the terms of the GNU General Public
+ *  License.  See linux/COPYING for more information.
+ *
+ */
+
+#ifndef _PCI_SH7780_H_
+#define _PCI_SH7780_H_
+
+/* Platform Specific Values */
+#define SH7780_VENDOR_ID	0x1912
+#define SH7780_DEVICE_ID	0x0002
+#define SH7781_DEVICE_ID	0x0001
+
+/* SH7780 Control Registers */
+#define	SH7780_PCI_VCR0		0xFE000000
+#define	SH7780_PCI_VCR1		0xFE000004
+#define	SH7780_PCI_VCR2		0xFE000008
+
+/* SH7780 Specific Values */
+#define SH7780_PCI_CONFIG_BASE	0xFD000000	/* Config space base addr */
+#define SH7780_PCI_CONFIG_SIZE	0x01000000	/* Config space size */
+
+#define SH7780_PCI_MEMORY_BASE	0xFD000000	/* Memory space base addr */
+#define SH7780_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
+
+#define SH7780_PCI_IO_BASE	0xFE400000	/* IO space base address */
+#define SH7780_PCI_IO_SIZE	0x00400000	/* Size of IO window */
+
+#define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
+#define PCI_REG(n)		(SH7780_PCIREG_BASE+n)
+
+/* SH7780 PCI Config Registers */
+#define SH7780_PCIVID		0x000		/* Vendor ID */
+#define SH7780_PCIDID		0x002		/* Device ID */
+#define SH7780_PCICMD		0x004		/* Command */
+#define SH7780_PCISTATUS	0x006		/* Status */
+#define SH7780_PCIRID		0x008		/* Revision ID */
+#define SH7780_PCIPIF		0x009		/* Program Interface */
+#define SH7780_PCISUB		0x00a		/* Sub class code */
+#define SH7780_PCIBCC		0x00b		/* Base class code */
+#define SH7780_PCICLS		0x00c		/* Cache line size */
+#define SH7780_PCILTM		0x00d		/* latency timer */
+#define SH7780_PCIHDR		0x00e		/* Header type */
+#define SH7780_PCIBIST		0x00f		/* BIST */
+#define SH7780_PCIIBAR		0x010		/* IO Base address */
+#define SH7780_PCIMBAR0		0x014		/* Memory base address0 */
+#define SH7780_PCIMBAR1		0x018		/* Memory base address1 */
+#define SH7780_PCISVID		0x02c		/* Sub system vendor ID */
+#define SH7780_PCISID		0x02e		/* Sub system ID */
+#define SH7780_PCICP		0x034
+#define SH7780_PCIINTLINE	0x03c		/* Interrupt line */
+#define SH7780_PCIINTPIN	0x03d		/* Interrupt pin */
+#define SH7780_PCIMINGNT	0x03e		/* Minumum grand */
+#define SH7780_PCIMAXLAT	0x03f		/* Maxmum latency */
+#define SH7780_PCICID		0x040
+#define SH7780_PCINIP		0x041
+#define SH7780_PCIPMC		0x042
+#define SH7780_PCIPMCSR		0x044
+#define SH7780_PCIPMCSR_BSE	0x046
+#define SH7780_PCICDD		0x047
+
+#define SH7780_PCIMBR0		0x1E0
+#define SH7780_PCIMBMR0		0x1E4
+#define SH7780_PCIMBR2		0x1F0
+#define SH7780_PCIMBMR2		0x1F4
+#define SH7780_PCIIOBR		0x1F8
+#define SH7780_PCIIOBMR		0x1FC
+#define SH7780_PCICSCR0		0x210		/* Cache Snoop1 Cnt. Register */
+#define SH7780_PCICSCR1		0x214		/* Cache Snoop2 Cnt. Register */
+#define SH7780_PCICSAR0		0x218	/* Cache Snoop1 Addr. Register */
+#define SH7780_PCICSAR1		0x21C	/* Cache Snoop2 Addr. Register */
+
+/* General Memory Config Addresses */
+#define SH7780_CS0_BASE_ADDR	0x0
+#define SH7780_MEM_REGION_SIZE	0x04000000
+#define SH7780_CS1_BASE_ADDR	(SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS2_BASE_ADDR	(SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS3_BASE_ADDR	(SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS4_BASE_ADDR	(SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS5_BASE_ADDR	(SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS6_BASE_ADDR	(SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+
+struct sh4_pci_address_map;
+
+/* arch/sh/drivers/pci/pci-sh7780.c */
+int sh7780_pcic_init(struct sh4_pci_address_map *map);
+
+#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 7c81b8b65bb..4ab5ea6b35f 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -70,12 +70,6 @@
 static void pci_set_rbar_region(unsigned int region,     unsigned long localAddr,
 			 unsigned long pciOffset, unsigned long regionSize);
 
-/*
- * The pcibios_map_platform_irq function is defined in the appropriate
- * board specific code and referenced here
- */
-extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
-
 static __init void SetPCIPLL(void)
 {
 	{
@@ -422,13 +416,6 @@ struct pci_ops st40pci_config_ops = {
 /* Everything hangs off this */
 static struct pci_bus *pci_root_bus;
 
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
-	return PCI_SLOT(dev->devfn);
-}
-
-
 static int __init pcibios_init(void)
 {
 	extern unsigned long memory_start, memory_end;
@@ -465,17 +452,11 @@ static int __init pcibios_init(void)
 	/* ok, do the scan man */
 	pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL);
 	pci_assign_unassigned_resources();
-	pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq);
 
 	return 0;
 }
-
 subsys_initcall(pcibios_init);
 
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-}
-
 /*
  * Publish a region of local address space over the PCI bus
  * to other devices.
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 3d546ba329c..d439336d2e1 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -1,21 +1,45 @@
-/* arch/sh/kernel/pci.c
- * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $
+/*
+ * arch/sh/drivers/pci/pci.c
  *
  * Copyright (c) 2002 M. R. Brown  <mrbrown@linux-sh.org>
- * 
- * 
+ * Copyright (c) 2004 - 2006 Paul Mundt  <lethal@linux-sh.org>
+ *
  * These functions are collected here to reduce duplication of common
  * code amongst the many platform-specific PCI support code files.
- * 
+ *
  * These routines require the following board-specific routines:
  * void pcibios_fixup_irqs();
  *
  * See include/asm-sh/pci.h for more information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <asm/io.h>
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
+static u8 __init simple_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+	u8 pin = *pinp;
+
+	while (dev->bus->parent) {
+		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+		/* Move up the chain of bridges. */
+		dev = dev->bus->self;
+	}
+	*pinp = pin;
+
+	/* The slot is the slot of the last bridge. */
+	return PCI_SLOT(dev->devfn);
+}
 
 static int __init pcibios_init(void)
 {
@@ -26,26 +50,32 @@ static int __init pcibios_init(void)
 #ifdef CONFIG_PCI_AUTO
 	/* assign resources */
 	busno = 0;
-	for (p = board_pci_channels; p->pci_ops != NULL; p++) {
+	for (p = board_pci_channels; p->pci_ops != NULL; p++)
 		busno = pciauto_assign_resources(busno, p) + 1;
-	}
 #endif
 
 	/* scan the buses */
 	busno = 0;
-	for (p= board_pci_channels; p->pci_ops != NULL; p++) {
+	for (p = board_pci_channels; p->pci_ops != NULL; p++) {
 		bus = pci_scan_bus(busno, p->pci_ops, p);
-		busno = bus->subordinate+1;
+		busno = bus->subordinate + 1;
 	}
 
-	/* board-specific fixups */
-	pcibios_fixup_irqs();
+	pci_fixup_irqs(simple_swizzle, pcibios_map_platform_irq);
 
 	return 0;
 }
-
 subsys_initcall(pcibios_init);
 
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+	pci_read_bridge_bases(bus);
+}
+
 void
 pcibios_update_resource(struct pci_dev *dev, struct resource *root,
 			struct resource *res, int resource)
@@ -61,13 +91,17 @@ pcibios_update_resource(struct pci_dev *dev, struct resource *root,
 		new |= PCI_ROM_ADDRESS_ENABLE;
 		reg = dev->rom_base_reg;
 	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
+		/*
+		 * Somebody might have asked allocation of a non-standard
+		 * resource
+		 */
 		return;
 	}
-	
+
 	pci_write_config_dword(dev, reg, new);
 	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
+		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
 		printk(KERN_ERR "PCI: Error while updating region "
 		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
 		       new, check);
@@ -145,7 +179,8 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n",
+	       pci_name(dev), lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
@@ -153,3 +188,39 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 {
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (unlikely(!len || !start))
+		return NULL;
+	if (maxlen && len > maxlen)
+		len = maxlen;
+
+	/*
+	 * Presently the IORESOURCE_MEM case is a bit special, most
+	 * SH7751 style PCI controllers have PCI memory at a fixed
+	 * location in the address space where no remapping is desired
+	 * (typically at 0xfd000000, but is_pci_memaddr() will know
+	 * best). With the IORESOURCE_MEM case more care has to be taken
+	 * to inhibit page table mapping for legacy cores, but this is
+	 * punted off to __ioremap().
+	 *					-- PFM.
+	 */
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		return ioremap(start, len);
+
+	return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index f05cd96f886..5da88a43d35 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -6,9 +6,10 @@ extra-y	:= head.o init_task.o vmlinux.lds
 
 obj-y	:= process.o signal.o entry.o traps.o irq.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
-	io.o io_generic.o sh_ksyms.o
+	io.o io_generic.o sh_ksyms.o syscalls.o
 
 obj-y				+= cpu/ timers/
+obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_CF_ENABLER)	+= cf-enabler.o
@@ -18,3 +19,5 @@ obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_APM)		+= apm.o
+obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/sh/kernel/apm.c b/arch/sh/kernel/apm.c
new file mode 100644
index 00000000000..871e7d64000
--- /dev/null
+++ b/arch/sh/kernel/apm.c
@@ -0,0 +1,539 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * based on ARM APM driver by
+ *  Jamey Hicks <jamey@crl.dec.com>
+ *
+ * adapted from the APM BIOS driver for Linux by
+ *  Stephen Rothwell (sfr@linuxcare.com)
+ *
+ * APM 1.2 Reference:
+ *   Intel Corporation, Microsoft Corporation. Advanced Power Management
+ *   (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/pm.h>
+#include <linux/pm_legacy.h>
+#include <asm/apm.h>
+
+#define MODNAME "apm"
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV			134
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS			16
+
+struct apm_queue {
+	unsigned int		event_head;
+	unsigned int		event_tail;
+	apm_event_t		events[APM_MAX_EVENTS];
+};
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+	struct list_head	list;
+
+	unsigned int		suser: 1;
+	unsigned int		writer: 1;
+	unsigned int		reader: 1;
+
+	int			suspend_result;
+	unsigned int		suspend_state;
+#define SUSPEND_NONE	0		/* no suspend pending */
+#define SUSPEND_PENDING	1		/* suspend pending read */
+#define SUSPEND_READ	2		/* suspend read, pending ack */
+#define SUSPEND_ACKED	3		/* suspend acked */
+#define SUSPEND_DONE	4		/* suspend completed */
+
+	struct apm_queue	queue;
+};
+
+/*
+ * Local variables
+ */
+static int suspends_pending;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+
+/*
+ * This is a list of everyone who has opened /dev/apm_bios
+ */
+static DECLARE_RWSEM(user_list_lock);
+static LIST_HEAD(apm_user_list);
+
+/*
+ * kapmd info.  kapmd provides us a process context to handle
+ * "APM" events within - specifically necessary if we're going
+ * to be suspending the system.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
+static DECLARE_COMPLETION(kapmd_exit);
+static DEFINE_SPINLOCK(kapmd_queue_lock);
+static struct apm_queue kapmd_queue;
+
+int apm_suspended;
+EXPORT_SYMBOL(apm_suspended);
+
+/* Platform-specific apm_read_proc(). */
+int (*apm_get_info)(char *buf, char **start, off_t fpos, int length);
+EXPORT_SYMBOL(apm_get_info);
+
+/*
+ * APM event queue management.
+ */
+static inline int queue_empty(struct apm_queue *q)
+{
+	return q->event_head == q->event_tail;
+}
+
+static inline apm_event_t queue_get_event(struct apm_queue *q)
+{
+	q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+	return q->events[q->event_tail];
+}
+
+static void queue_add_event(struct apm_queue *q, apm_event_t event)
+{
+	q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
+	if (q->event_head == q->event_tail) {
+		static int notified;
+
+		if (notified++ == 0)
+			printk(KERN_ERR "apm: an event queue overflowed\n");
+
+		q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+	}
+	q->events[q->event_head] = event;
+}
+
+static void queue_event_one_user(struct apm_user *as, apm_event_t event)
+{
+	if (as->suser && as->writer) {
+		switch (event) {
+		case APM_SYS_SUSPEND:
+		case APM_USER_SUSPEND:
+			/*
+			 * If this user already has a suspend pending,
+			 * don't queue another one.
+			 */
+			if (as->suspend_state != SUSPEND_NONE)
+				return;
+
+			as->suspend_state = SUSPEND_PENDING;
+			suspends_pending++;
+			break;
+		}
+	}
+	queue_add_event(&as->queue, event);
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+	struct apm_user *as;
+
+	down_read(&user_list_lock);
+
+	list_for_each_entry(as, &apm_user_list, list)
+		if (as != sender && as->reader)
+			queue_event_one_user(as, event);
+
+	up_read(&user_list_lock);
+	wake_up_interruptible(&apm_waitqueue);
+}
+
+/**
+ * apm_queue_event - queue an APM event for kapmd
+ * @event: APM event
+ *
+ * Queue an APM event for kapmd to process and ultimately take the
+ * appropriate action.  Only a subset of events are handled:
+ *   %APM_LOW_BATTERY
+ *   %APM_POWER_STATUS_CHANGE
+ *   %APM_USER_SUSPEND
+ *   %APM_SYS_SUSPEND
+ *   %APM_CRITICAL_SUSPEND
+ */
+void apm_queue_event(apm_event_t event)
+{
+	spin_lock_irq(&kapmd_queue_lock);
+	queue_add_event(&kapmd_queue, event);
+	spin_unlock_irq(&kapmd_queue_lock);
+
+	wake_up_interruptible(&kapmd_wait);
+}
+EXPORT_SYMBOL(apm_queue_event);
+
+static void apm_suspend(void)
+{
+	struct apm_user *as;
+	int err;
+
+	apm_suspended = 1;
+	err = pm_suspend(PM_SUSPEND_MEM);
+
+	/*
+	 * Anyone on the APM queues will think we're still suspended.
+	 * Send a message so everyone knows we're now awake again.
+	 */
+	queue_event(APM_NORMAL_RESUME, NULL);
+
+	/*
+	 * Finally, wake up anyone who is sleeping on the suspend.
+	 */
+	down_read(&user_list_lock);
+	list_for_each_entry(as, &apm_user_list, list) {
+		as->suspend_result = err;
+		as->suspend_state = SUSPEND_DONE;
+	}
+	up_read(&user_list_lock);
+
+	wake_up(&apm_suspend_waitqueue);
+	apm_suspended = 0;
+}
+
+static ssize_t apm_read(struct file *fp, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct apm_user *as = fp->private_data;
+	apm_event_t event;
+	int i = count, ret = 0;
+
+	if (count < sizeof(apm_event_t))
+		return -EINVAL;
+
+	if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
+		return -EAGAIN;
+
+	wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
+
+	while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
+		event = queue_get_event(&as->queue);
+
+		ret = -EFAULT;
+		if (copy_to_user(buf, &event, sizeof(event)))
+			break;
+
+		if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
+			as->suspend_state = SUSPEND_READ;
+
+		buf += sizeof(event);
+		i -= sizeof(event);
+	}
+
+	if (i < count)
+		ret = count - i;
+
+	return ret;
+}
+
+static unsigned int apm_poll(struct file *fp, poll_table * wait)
+{
+	struct apm_user *as = fp->private_data;
+
+	poll_wait(fp, &apm_waitqueue, wait);
+	return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
+}
+
+/*
+ * apm_ioctl - handle APM ioctl
+ *
+ * APM_IOC_SUSPEND
+ *   This IOCTL is overloaded, and performs two functions.  It is used to:
+ *     - initiate a suspend
+ *     - acknowledge a suspend read from /dev/apm_bios.
+ *   Only when everyone who has opened /dev/apm_bios with write permission
+ *   has acknowledge does the actual suspend happen.
+ */
+static int
+apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
+{
+	struct apm_user *as = filp->private_data;
+	unsigned long flags;
+	int err = -EINVAL;
+
+	if (!as->suser || !as->writer)
+		return -EPERM;
+
+	switch (cmd) {
+	case APM_IOC_SUSPEND:
+		as->suspend_result = -EINTR;
+
+		if (as->suspend_state == SUSPEND_READ) {
+			/*
+			 * If we read a suspend command from /dev/apm_bios,
+			 * then the corresponding APM_IOC_SUSPEND ioctl is
+			 * interpreted as an acknowledge.
+			 */
+			as->suspend_state = SUSPEND_ACKED;
+			suspends_pending--;
+		} else {
+			/*
+			 * Otherwise it is a request to suspend the system.
+			 * Queue an event for all readers, and expect an
+			 * acknowledge from all writers who haven't already
+			 * acknowledged.
+			 */
+			queue_event(APM_USER_SUSPEND, as);
+		}
+
+		/*
+		 * If there are no further acknowledges required, suspend
+		 * the system.
+		 */
+		if (suspends_pending == 0)
+			apm_suspend();
+
+		/*
+		 * Wait for the suspend/resume to complete.  If there are
+		 * pending acknowledges, we wait here for them.
+		 *
+		 * Note that we need to ensure that the PM subsystem does
+		 * not kick us out of the wait when it suspends the threads.
+		 */
+		flags = current->flags;
+		current->flags |= PF_NOFREEZE;
+
+		/*
+		 * Note: do not allow a thread which is acking the suspend
+		 * to escape until the resume is complete.
+		 */
+		if (as->suspend_state == SUSPEND_ACKED)
+			wait_event(apm_suspend_waitqueue,
+					 as->suspend_state == SUSPEND_DONE);
+		else
+			wait_event_interruptible(apm_suspend_waitqueue,
+					 as->suspend_state == SUSPEND_DONE);
+
+		current->flags = flags;
+		err = as->suspend_result;
+		as->suspend_state = SUSPEND_NONE;
+		break;
+	}
+
+	return err;
+}
+
+static int apm_release(struct inode * inode, struct file * filp)
+{
+	struct apm_user *as = filp->private_data;
+	filp->private_data = NULL;
+
+	down_write(&user_list_lock);
+	list_del(&as->list);
+	up_write(&user_list_lock);
+
+	/*
+	 * We are now unhooked from the chain.  As far as new
+	 * events are concerned, we no longer exist.  However, we
+	 * need to balance suspends_pending, which means the
+	 * possibility of sleeping.
+	 */
+	if (as->suspend_state != SUSPEND_NONE) {
+		suspends_pending -= 1;
+		if (suspends_pending == 0)
+			apm_suspend();
+	}
+
+	kfree(as);
+	return 0;
+}
+
+static int apm_open(struct inode * inode, struct file * filp)
+{
+	struct apm_user *as;
+
+	as = kzalloc(sizeof(*as), GFP_KERNEL);
+	if (as) {
+		/*
+		 * XXX - this is a tiny bit broken, when we consider BSD
+		 * process accounting. If the device is opened by root, we
+		 * instantly flag that we used superuser privs. Who knows,
+		 * we might close the device immediately without doing a
+		 * privileged operation -- cevans
+		 */
+		as->suser = capable(CAP_SYS_ADMIN);
+		as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+		as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+
+		down_write(&user_list_lock);
+		list_add(&as->list, &apm_user_list);
+		up_write(&user_list_lock);
+
+		filp->private_data = as;
+	}
+
+	return as ? 0 : -ENOMEM;
+}
+
+static struct file_operations apm_bios_fops = {
+	.owner		= THIS_MODULE,
+	.read		= apm_read,
+	.poll		= apm_poll,
+	.ioctl		= apm_ioctl,
+	.open		= apm_open,
+	.release	= apm_release,
+};
+
+static struct miscdevice apm_device = {
+	.minor		= APM_MINOR_DEV,
+	.name		= "apm_bios",
+	.fops		= &apm_bios_fops
+};
+
+
+#ifdef CONFIG_PROC_FS
+/*
+ * Arguments, with symbols from linux/apm_bios.h.
+ *
+ *   0) Linux driver version (this will change if format changes)
+ *   1) APM BIOS Version.  Usually 1.0, 1.1 or 1.2.
+ *   2) APM flags from APM Installation Check (0x00):
+ *	bit 0: APM_16_BIT_SUPPORT
+ *	bit 1: APM_32_BIT_SUPPORT
+ *	bit 2: APM_IDLE_SLOWS_CLOCK
+ *	bit 3: APM_BIOS_DISABLED
+ *	bit 4: APM_BIOS_DISENGAGED
+ *   3) AC line status
+ *	0x00: Off-line
+ *	0x01: On-line
+ *	0x02: On backup power (BIOS >= 1.1 only)
+ *	0xff: Unknown
+ *   4) Battery status
+ *	0x00: High
+ *	0x01: Low
+ *	0x02: Critical
+ *	0x03: Charging
+ *	0x04: Selected battery not present (BIOS >= 1.2 only)
+ *	0xff: Unknown
+ *   5) Battery flag
+ *	bit 0: High
+ *	bit 1: Low
+ *	bit 2: Critical
+ *	bit 3: Charging
+ *	bit 7: No system battery
+ *	0xff: Unknown
+ *   6) Remaining battery life (percentage of charge):
+ *	0-100: valid
+ *	-1: Unknown
+ *   7) Remaining battery life (time units):
+ *	Number of remaining minutes or seconds
+ *	-1: Unknown
+ *   8) min = minutes; sec = seconds
+ */
+static int apm_read_proc(char *buf, char **start, off_t fpos, int length)
+{
+	if (likely(apm_get_info))
+		return apm_get_info(buf, start, fpos, length);
+
+	return -EINVAL;
+}
+#endif
+
+static int kapmd(void *arg)
+{
+	daemonize("kapmd");
+	current->flags |= PF_NOFREEZE;
+
+	do {
+		apm_event_t event;
+
+		wait_event_interruptible(kapmd_wait,
+				!queue_empty(&kapmd_queue) || !pm_active);
+
+		if (!pm_active)
+			break;
+
+		spin_lock_irq(&kapmd_queue_lock);
+		event = 0;
+		if (!queue_empty(&kapmd_queue))
+			event = queue_get_event(&kapmd_queue);
+		spin_unlock_irq(&kapmd_queue_lock);
+
+		switch (event) {
+		case 0:
+			break;
+
+		case APM_LOW_BATTERY:
+		case APM_POWER_STATUS_CHANGE:
+			queue_event(event, NULL);
+			break;
+
+		case APM_USER_SUSPEND:
+		case APM_SYS_SUSPEND:
+			queue_event(event, NULL);
+			if (suspends_pending == 0)
+				apm_suspend();
+			break;
+
+		case APM_CRITICAL_SUSPEND:
+			apm_suspend();
+			break;
+		}
+	} while (1);
+
+	complete_and_exit(&kapmd_exit, 0);
+}
+
+static int __init apm_init(void)
+{
+	int ret;
+
+	pm_active = 1;
+
+	ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
+	if (unlikely(ret < 0)) {
+		pm_active = 0;
+		return ret;
+	}
+
+	create_proc_info_entry("apm", 0, NULL, apm_read_proc);
+
+	ret = misc_register(&apm_device);
+	if (unlikely(ret != 0)) {
+		remove_proc_entry("apm", NULL);
+
+		pm_active = 0;
+		wake_up(&kapmd_wait);
+		wait_for_completion(&kapmd_exit);
+	}
+
+	return ret;
+}
+
+static void __exit apm_exit(void)
+{
+	misc_deregister(&apm_device);
+	remove_proc_entry("apm", NULL);
+
+	pm_active = 0;
+	wake_up(&kapmd_wait);
+	wait_for_completion(&kapmd_exit);
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell, Andriy Skulysh");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index f1f9ab87f0b..3e5fa1e24df 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -10,7 +10,8 @@
  */
 
 #include <linux/init.h>
-
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
@@ -32,8 +33,6 @@
 /* SH4 can't access PCMCIA interface through P2 area.
  * we must remap it with appropreate attribute bit of the page set.
  * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
 
 #if defined(CONFIG_CF_AREA6)
 #define slot_no 0
@@ -41,9 +40,6 @@
 #define slot_no 1
 #endif
 
-/* defined in mm/ioremap.c */
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-
 /* use this pointer to access to directly connected compact flash io area*/
 void *cf_io_base;
 
@@ -62,7 +58,7 @@ static int __init allocate_cf_area(void)
 		return -ENOMEM;
 	}
 /*	printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
-	    	paddrbase, psize, prot.pgprot, cf_io_base);*/
+		paddrbase, psize, prot.pgprot, cf_io_base);*/
 
 	/* XXX : do we need attribute and common-memory area also? */
 
@@ -87,7 +83,7 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se/se.h>
+#include <asm/se.h>
 
 /*
  * SolutionEngine
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 59d5b748752..fb5dac06938 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -8,6 +8,5 @@ obj-$(CONFIG_CPU_SH2)		+= sh2/
 obj-$(CONFIG_CPU_SH3)		+= sh3/
 obj-$(CONFIG_CPU_SH4)		+= sh4/
 
-obj-$(CONFIG_SH_RTC)		+= rtc.o
 obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 97fa37f42b8..51ec64cdf34 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/clock.c - SuperH clock framework
  *
- *  Copyright (C) 2005  Paul Mundt
+ *  Copyright (C) 2005, 2006  Paul Mundt
  *
  * This clock framework is derived from the OMAP version by:
  *
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/kref.h>
 #include <linux/seq_file.h>
@@ -24,7 +25,7 @@
 
 static LIST_HEAD(clock_list);
 static DEFINE_SPINLOCK(clock_lock);
-static DECLARE_MUTEX(clock_list_sem);
+static DEFINE_MUTEX(clock_list_sem);
 
 /*
  * Each subtype is expected to define the init routines for these clocks,
@@ -140,21 +141,21 @@ void clk_disable(struct clk *clk)
 
 int clk_register(struct clk *clk)
 {
-	down(&clock_list_sem);
+	mutex_lock(&clock_list_sem);
 
 	list_add(&clk->node, &clock_list);
 	kref_init(&clk->kref);
 
-	up(&clock_list_sem);
+	mutex_unlock(&clock_list_sem);
 
 	return 0;
 }
 
 void clk_unregister(struct clk *clk)
 {
-	down(&clock_list_sem);
+	mutex_lock(&clock_list_sem);
 	list_del(&clk->node);
-	up(&clock_list_sem);
+	mutex_unlock(&clock_list_sem);
 }
 
 inline unsigned long clk_get_rate(struct clk *clk)
@@ -198,14 +199,14 @@ struct clk *clk_get(const char *id)
 {
 	struct clk *p, *clk = ERR_PTR(-ENOENT);
 
-	down(&clock_list_sem);
+	mutex_lock(&clock_list_sem);
 	list_for_each_entry(p, &clock_list, node) {
 		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
 			clk = p;
 			break;
 		}
 	}
-	up(&clock_list_sem);
+	mutex_unlock(&clock_list_sem);
 
 	return clk;
 }
@@ -225,7 +226,7 @@ int __init clk_init(void)
 {
 	int i, ret = 0;
 
-	BUG_ON(unlikely(!master_clk.rate));
+	BUG_ON(!master_clk.rate);
 
 	for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
 		struct clk *clk = onchip_clocks[i];
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 868e68b2888..bfb90eb0b7a 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -4,6 +4,7 @@
  * CPU init code
  *
  * Copyright (C) 2002, 2003  Paul Mundt
+ * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,7 @@
 #include <linux/kernel.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
+#include <asm/page.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <asm/cache.h>
@@ -51,7 +53,15 @@ static void __init cache_init(void)
 	ccr = ctrl_inl(CCR);
 
 	/*
-	 * If the cache is already enabled .. flush it.
+	 * At this point we don't know whether the cache is enabled or not - a
+	 * bootloader may have enabled it.  There are at least 2 things that
+	 * could be dirty in the cache at this point:
+	 * 1. kernel command line set up by boot loader
+	 * 2. spilled registers from the prolog of this function
+	 * => before re-initialising the cache, we must do a purge of the whole
+	 * cache out to memory for safety.  As long as nothing is spilled
+	 * during the loop to lines that have already been done, this is safe.
+	 * - RPC
 	 */
 	if (ccr & CCR_CACHE_ENABLE) {
 		unsigned long ways, waysize, addrstart;
@@ -98,6 +108,8 @@ static void __init cache_init(void)
 	/* Force EMODE if possible */
 	if (cpu_data->dcache.ways > 1)
 		flags |= CCR_CACHE_EMODE;
+	else
+		flags &= ~CCR_CACHE_EMODE;
 #endif
 
 #ifdef CONFIG_SH_WRITETHROUGH
@@ -112,6 +124,9 @@ static void __init cache_init(void)
 	/* Turn on OCRAM -- halve the OC */
 	flags |= CCR_CACHE_ORA;
 	cpu_data->dcache.sets >>= 1;
+
+	cpu_data->dcache.way_size = cpu_data->dcache.sets *
+				    cpu_data->dcache.linesz;
 #endif
 
 	ctrl_outl(flags, CCR);
@@ -184,6 +199,10 @@ asmlinkage void __init sh_cpu_init(void)
 	/* Init the cache */
 	cache_init();
 
+	shm_align_mask = max_t(unsigned long,
+			       cpu_data->dcache.way_size - 1,
+			       PAGE_SIZE - 1);
+
 	/* Disable the FPU */
 	if (fpu_disabled) {
 		printk("FPU Disabled\n");
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index e3cccea15e1..1c034c283f5 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -3,5 +3,6 @@
 #
 obj-y	+= ipr.o imask.o
 
-obj-$(CONFIG_CPU_HAS_PINT_IRQ)	+= pint.o
-obj-$(CONFIG_CPU_HAS_INTC2_IRQ)	+= intc2.o
+obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o
+obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o
+obj-$(CONFIG_CPU_HAS_INTC2_IRQ)		+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index 30064bf6e15..e30e4b7aa70 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -241,9 +241,9 @@ static struct intc2_init {
 	/* 110-111 reserved/unused */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 	{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
-#ifdef CONFIG_SH_RTC
-	{ RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-#endif
+	{ 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+	{ 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+	{ 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY },
 	{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
 	{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
 	{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 0f545941fb4..f785822cd5d 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -57,31 +57,27 @@ static struct hw_interrupt_type ipr_irq_type = {
 
 static void disable_ipr_irq(unsigned int irq)
 {
-	unsigned long val, flags;
+	unsigned long val;
 	unsigned int addr = ipr_data[irq].addr;
 	unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift);
 
 	/* Set the priority in IPR to 0 */
-	local_irq_save(flags);
 	val = ctrl_inw(addr);
 	val &= mask;
 	ctrl_outw(val, addr);
-	local_irq_restore(flags);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
-	unsigned long val, flags;
+	unsigned long val;
 	unsigned int addr = ipr_data[irq].addr;
 	int priority = ipr_data[irq].priority;
 	unsigned short value = (priority << ipr_data[irq].shift);
 
 	/* Set priority in IPR back to original value */
-	local_irq_save(flags);
 	val = ctrl_inw(addr);
 	val |= value;
 	ctrl_outw(val, addr);
-	local_irq_restore(flags);
 }
 
 static void mask_and_ack_ipr(unsigned int irq)
@@ -89,6 +85,7 @@ static void mask_and_ack_ipr(unsigned int irq)
 	disable_ipr_irq(irq);
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is needed when we use edge triggered setting */
 	/* XXX: Is it really needed? */
@@ -123,7 +120,7 @@ void __init init_IRQ(void)
 #ifndef CONFIG_CPU_SUBTYPE_SH7780
 	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
 	make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
-#if defined(CONFIG_SH_RTC)
+#ifdef RTC_IRQ
 	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
 #endif
 
@@ -162,6 +159,7 @@ void __init init_IRQ(void)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/*
 	 * Initialize the Interrupt Controller (INTC)
@@ -192,6 +190,8 @@ void __init init_IRQ(void)
 	/* Perform the machine specific initialisation */
 	if (sh_mv.mv_init_irq != NULL)
 		sh_mv.mv_init_irq();
+
+	irq_ctx_init(smp_processor_id());
 }
 
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c
index 4b2abe5eb16..492db31b3ca 100644
--- a/arch/sh/boards/adx/irq_maskreg.c
+++ b/arch/sh/kernel/cpu/irq/maskreg.c
@@ -1,30 +1,23 @@
 /*
- * linux/arch/sh/kernel/irq_maskreg.c
+ * Interrupt handling for Simple external interrupt mask register
  *
  * Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp>
  *
- * This file may be copied or modified under the terms of the GNU
- * General Public License.  See linux/COPYING for more information.
- *
- * Interrupt handling for Simple external interrupt mask register
- *
  * This is for the machine which have single 16 bit register
  * for masking external IRQ individually.
- * Each bit of the register is for masking each interrupt.  
+ * Each bit of the register is for masking each interrupt.
+ *
+ * This file may be copied or modified under the terms of the GNU
+ * General Public License.  See linux/COPYING for more information.
  */
-
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/system.h>
 #include <asm/io.h>
-#include <asm/machvec.h>
 
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-unsigned short *irq_mask_register = 0;
+/* address of external interrupt mask register */
+unsigned long irq_mask_register;
 
 /* forward declaration */
 static unsigned int startup_maskreg_irq(unsigned int irq);
@@ -36,7 +29,7 @@ static void end_maskreg_irq(unsigned int irq);
 
 /* hw_interrupt_type */
 static struct hw_interrupt_type maskreg_irq_type = {
-	.typename = " Mask Register",
+	.typename = "Mask Register",
 	.startup = startup_maskreg_irq,
 	.shutdown = shutdown_maskreg_irq,
 	.enable = enable_maskreg_irq,
@@ -47,7 +40,7 @@ static struct hw_interrupt_type maskreg_irq_type = {
 
 /* actual implementatin */
 static unsigned int startup_maskreg_irq(unsigned int irq)
-{ 
+{
 	enable_maskreg_irq(irq);
 	return 0; /* never anything pending */
 }
@@ -59,32 +52,26 @@ static void shutdown_maskreg_irq(unsigned int irq)
 
 static void disable_maskreg_irq(unsigned int irq)
 {
-	if (irq_mask_register) {
-		unsigned long flags;
-		unsigned short val, mask = 0x01 << irq;
+	unsigned short val, mask = 0x01 << irq;
+
+	BUG_ON(!irq_mask_register);
 
-		/* Set "irq"th bit */
-		local_irq_save(flags);
-		val = ctrl_inw((unsigned long)irq_mask_register);
-		val |= mask;
-		ctrl_outw(val, (unsigned long)irq_mask_register);
-		local_irq_restore(flags);
-	}
+	/* Set "irq"th bit */
+	val = ctrl_inw(irq_mask_register);
+	val |= mask;
+	ctrl_outw(val, irq_mask_register);
 }
 
 static void enable_maskreg_irq(unsigned int irq)
 {
-	if (irq_mask_register) {
-		unsigned long flags;
-		unsigned short val, mask = ~(0x01 << irq);
+	unsigned short val, mask = ~(0x01 << irq);
+
+	BUG_ON(!irq_mask_register);
 
-		/* Clear "irq"th bit */
-		local_irq_save(flags);
-		val = ctrl_inw((unsigned long)irq_mask_register);
-		val &= mask;
-		ctrl_outw(val, (unsigned long)irq_mask_register);
-		local_irq_restore(flags);
-	}
+	/* Clear "irq"th bit */
+	val = ctrl_inw(irq_mask_register);
+	val &= mask;
+	ctrl_outw(val, irq_mask_register);
 }
 
 static void mask_and_ack_maskreg(unsigned int irq)
@@ -101,6 +88,6 @@ static void end_maskreg_irq(unsigned int irq)
 void make_maskreg_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &maskreg_irq_type;
+	irq_desc[irq].handler = &maskreg_irq_type;
 	disable_maskreg_irq(irq);
 }
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
index 80cd8108d36..17f47b373d6 100644
--- a/arch/sh/kernel/cpu/irq/pint.c
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -48,26 +48,22 @@ static struct hw_interrupt_type pint_irq_type = {
 
 static void disable_pint_irq(unsigned int irq)
 {
-	unsigned long val, flags;
+	unsigned long val;
 
-	local_irq_save(flags);
 	val = ctrl_inw(INTC_INTER);
 	val &= ~(1 << (irq - PINT_IRQ_BASE));
 	ctrl_outw(val, INTC_INTER);	/* disable PINTn */
 	portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
-	local_irq_restore(flags);
 }
 
 static void enable_pint_irq(unsigned int irq)
 {
-	unsigned long val, flags;
+	unsigned long val;
 
-	local_irq_save(flags);
 	val = ctrl_inw(INTC_INTER);
 	val |= 1 << (irq - PINT_IRQ_BASE);
 	ctrl_outw(val, INTC_INTER);	/* enable PINTn */
 	portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
-	local_irq_restore(flags);
 }
 
 static void mask_and_ack_pint(unsigned int irq)
diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c
deleted file mode 100644
index 4304cf75cfa..00000000000
--- a/arch/sh/kernel/cpu/rtc.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support
- *
- *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-void sh_rtc_gettimeofday(struct timespec *ts)
-{
-	unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit;
-	unsigned long flags;
-
- again:
-	do {
-		local_irq_save(flags);
-		ctrl_outb(0, RCR1);  /* Clear CF-bit */
-		sec128 = ctrl_inb(R64CNT);
-		sec = ctrl_inb(RSECCNT);
-		min = ctrl_inb(RMINCNT);
-		hr  = ctrl_inb(RHRCNT);
-		wk  = ctrl_inb(RWKCNT);
-		day = ctrl_inb(RDAYCNT);
-		mon = ctrl_inb(RMONCNT);
-#if defined(CONFIG_CPU_SH4)
-		yr  = ctrl_inw(RYRCNT);
-		yr100 = (yr >> 8);
-		yr &= 0xff;
-#else
-		yr  = ctrl_inb(RYRCNT);
-		yr100 = (yr == 0x99) ? 0x19 : 0x20;
-#endif
-		sec2 = ctrl_inb(R64CNT);
-		cf_bit = ctrl_inb(RCR1) & RCR1_CF;
-		local_irq_restore(flags);
-	} while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
-
-	BCD_TO_BIN(yr100);
-	BCD_TO_BIN(yr);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(hr);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(sec);
-
-	if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
-	    hr > 23 || min > 59 || sec > 59) {
-		printk(KERN_ERR
-		       "SH RTC: invalid value, resetting to 1 Jan 2000\n");
-		local_irq_save(flags);
-		ctrl_outb(RCR2_RESET, RCR2);  /* Reset & Stop */
-		ctrl_outb(0, RSECCNT);
-		ctrl_outb(0, RMINCNT);
-		ctrl_outb(0, RHRCNT);
-		ctrl_outb(6, RWKCNT);
-		ctrl_outb(1, RDAYCNT);
-		ctrl_outb(1, RMONCNT);
-#if defined(CONFIG_CPU_SH4)
-		ctrl_outw(0x2000, RYRCNT);
-#else
-		ctrl_outb(0, RYRCNT);
-#endif
-		ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start */
-		goto again;
-	}
-
-#if RTC_BIT_INVERTED != 0
-	if ((sec128 & RTC_BIT_INVERTED))
-		sec--;
-#endif
-
-	ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
-	ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000;
-}
-
-/*
- * Changed to only care about tv_sec, and not the full timespec struct
- * (i.e. tv_nsec).  It can easily be switched to timespec for future cpus
- * that support setting usec or nsec RTC values.
- */
-int sh_rtc_settimeofday(const time_t secs)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ctrl_outb(RCR2_RESET, RCR2);  /* Reset pre-scaler & stop RTC */
-
-	cmos_minutes = ctrl_inb(RMINCNT);
-	BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = secs % 60;
-	real_minutes = secs / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		BIN_TO_BCD(real_seconds);
-		BIN_TO_BCD(real_minutes);
-		ctrl_outb(real_seconds, RSECCNT);
-		ctrl_outb(real_minutes, RMINCNT);
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_time: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2);  /* Start RTC */
-	local_irq_restore(flags);
-
-	return retval;
-}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index b54dbb9a0c8..58d3815695f 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -4,10 +4,21 @@
 
 obj-y	:= ex.o probe.o
 
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706)	+= setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707)	+= setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh7708.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7300)	+= setup-sh7300.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o
+
+# Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7300)	:= clock-sh7300.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7705)	:= clock-sh7705.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7706)	:= clock-sh7706.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7709)	:= clock-sh7709.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7710)	:= clock-sh7300.o
 
 obj-y	+= $(clock-y)
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
new file mode 100644
index 00000000000..0cf96f9833b
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7706.c
+ *
+ * SH7706 support for the clock framework
+ *
+ *  Copyright (C) 2006  Takashi YOSHII
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ *  Copyright (C) 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+static int ifc_divisors[]    = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	int frqcr = ctrl_inw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh7706_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int frqcr = ctrl_inw(FRQCR);
+	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7706_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int frqcr = ctrl_inw(FRQCR);
+	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+	clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh7706_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int frqcr = ctrl_inw(FRQCR);
+	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7706_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7706_clk_ops[] = {
+	&sh7706_master_clk_ops,
+	&sh7706_module_clk_ops,
+	&sh7706_bus_clk_ops,
+	&sh7706_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7706_clk_ops))
+		*ops = sh7706_clk_ops[idx];
+}
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index cc04e9e239f..44daf44833f 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -84,8 +84,12 @@ ENTRY(interrupt_table)
 	.long	do_IRQ	!      rovi
 	.long	do_IRQ			
 	.long	do_IRQ			/* 5E0 */
-#if  defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-     defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if  defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+     defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+     defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+     defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+     defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+     defined(CONFIG_CPU_SUBTYPE_SH7710)
 	.long	do_IRQ	! 32 IRQ  irq0	/* 600 */
 	.long	do_IRQ	! 33      irq1
 	.long	do_IRQ	! 34      irq2
@@ -147,6 +151,51 @@ ENTRY(interrupt_table)
 	.long   do_IRQ	! 62 PCC  pcc0i
 	.long   do_IRQ	! 63      pcc1i	/* 9E0 */
 #endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+	.long   exception_none	! 61 	/* 9A0 */
+	.long   exception_none	! 62
+	.long   exception_none	! 63
+	.long   exception_none	! 64	/* A00 */
+	.long   exception_none	! 65
+	.long   exception_none	! 66
+	.long   exception_none	! 67
+	.long   exception_none	! 68
+	.long   exception_none	! 69
+	.long   exception_none	! 70
+	.long   exception_none	! 71
+	.long   exception_none	! 72	/* B00 */
+	.long   exception_none	! 73
+	.long   exception_none	! 74
+	.long   exception_none	! 75
+	.long   do_IRQ	! 76 DMAC2 dei4	/* B80 */
+	.long   do_IRQ	! 77 DMAC2 dei5
+	.long   exception_none	! 78
+	.long   do_IRQ	! 79 IPSEC ipseci /* BE0 */
+	.long   do_IRQ	! 80 EDMAC eint0 /* C00 */
+	.long   do_IRQ	! 81 EDMAC eint1
+	.long   do_IRQ	! 82 EDMAC eint2
+	.long   exception_none	! 83	/* C60 */
+	.long   exception_none	! 84
+	.long   exception_none	! 85
+	.long   exception_none	! 86
+	.long   exception_none	! 87
+	.long   exception_none	! 88	/* D00 */
+	.long   exception_none	! 89
+	.long   exception_none	! 90
+	.long   exception_none	! 91
+	.long   exception_none	! 92
+	.long   exception_none	! 93
+	.long   exception_none	! 94
+	.long   exception_none	! 95
+	.long   do_IRQ	! 96 SIOF eri0	/* E00 */
+	.long   do_IRQ	! 97      txi0
+	.long   do_IRQ	! 98      rxi0
+	.long   do_IRQ	! 99      cci0
+	.long   do_IRQ	! 100     eri1	/* E80 */
+	.long   do_IRQ	! 101     txi1
+	.long   do_IRQ	! 102     rxi2
+	.long   do_IRQ	! 103     cci3
+#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7300)
 	.long   do_IRQ	! 64
 	.long   do_IRQ	! 65
@@ -195,4 +244,3 @@ ENTRY(interrupt_table)
 	.long   do_IRQ	! 108
 #endif
 #endif
-
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 5cdc8863860..e6709883629 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -72,6 +72,12 @@ int __init detect_cpu_and_cache_system(void)
 		cpu_data->dcache.sets		= 256;
 		cpu_data->type = CPU_SH7729;
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7706)
+		cpu_data->type = CPU_SH7706;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+		cpu_data->type = CPU_SH7710;
+#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 		cpu_data->type = CPU_SH7705;
 
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7300.c b/arch/sh/kernel/cpu/sh3/setup-sh7300.c
new file mode 100644
index 00000000000..ab4d204bfba
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7300.c
@@ -0,0 +1,43 @@
+/*
+ * SH7300 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4430000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 80, 80, 80, 80 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7300_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7300_devices_setup(void)
+{
+	return platform_add_devices(sh7300_devices,
+				    ARRAY_SIZE(sh7300_devices));
+}
+__initcall(sh7300_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
new file mode 100644
index 00000000000..a8e41c5241f
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -0,0 +1,48 @@
+/*
+ * SH7705 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4400000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.mapbase	= 0xa4410000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 56, 57, 59, 58 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7705_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7705_devices_setup(void)
+{
+	return platform_add_devices(sh7705_devices,
+				    ARRAY_SIZE(sh7705_devices));
+}
+__initcall(sh7705_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c
new file mode 100644
index 00000000000..f933723911c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7708.c
@@ -0,0 +1,43 @@
+/*
+ * SH7708 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfffffe80,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 23, 24, 25, 0 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7708_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7708_devices_setup(void)
+{
+	return platform_add_devices(sh7708_devices,
+				    ARRAY_SIZE(sh7708_devices));
+}
+__initcall(sh7708_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
new file mode 100644
index 00000000000..ff43ef2a1f0
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -0,0 +1,53 @@
+/*
+ * SH7707/SH7709 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfffffe80,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 23, 24, 25, 0 },
+	}, {
+		.mapbase	= 0xa4000150,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 56, 57, 59, 58 },
+	}, {
+		.mapbase	= 0xa4000140,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_IRDA,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7709_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7709_devices_setup(void)
+{
+	return platform_add_devices(sh7709_devices,
+				    ARRAY_SIZE(sh7709_devices));
+}
+__initcall(sh7709_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
new file mode 100644
index 00000000000..895f99ee6a9
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -0,0 +1,43 @@
+/*
+ * SH7710 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4400000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7710_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7710_devices_setup(void)
+{
+	return platform_add_devices(sh7710_devices,
+				    ARRAY_SIZE(sh7710_devices));
+}
+__initcall(sh7710_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 3d5cafc71ae..8dbf3895ece 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -7,6 +7,16 @@ obj-y	:= ex.o probe.o
 obj-$(CONFIG_SH_FPU)                    += fpu.o
 obj-$(CONFIG_SH_STORE_QUEUES)		+= sq.o
 
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7760)	+= setup-sh7760.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
+obj-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= setup-sh4-202.o
+
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH4)			:= clock-sh4.o
 clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S
index 26a27df0650..7146893a6cc 100644
--- a/arch/sh/kernel/cpu/sh4/ex.S
+++ b/arch/sh/kernel/cpu/sh4/ex.S
@@ -72,6 +72,7 @@ ENTRY(interrupt_table)
 	.long	do_IRQ	! 1110
 	.long	exception_error		
 	! Internal hardware
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
 	.long	do_IRQ	! TMU0 tuni0	/* 400 */
 	.long	do_IRQ	! TMU1 tuni1
 	.long	do_IRQ	! TMU2 tuni2
@@ -122,6 +123,13 @@ ENTRY(interrupt_table)
 	.long	do_IRQ	! 45      dmte5
 	.long	do_IRQ	! 46      dmte6
 	.long	do_IRQ	! 47      dmte7		/* 7E0 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
+	.long	do_IRQ	! 44 IIC1 ali		/* 780 */
+	.long	do_IRQ	! 45      tacki
+	.long	do_IRQ	! 46      waiti
+	.long	do_IRQ	! 47      dtei		/* 7E0 */
+	.long	do_IRQ	! 48 DMAC dei0		/* 800 */
+	.long	do_IRQ	! 49      dei1		/* 820 */
 #else
 	.long	exception_error			! 44	/* 780 */
 	.long	exception_error			! 45
@@ -131,7 +139,8 @@ ENTRY(interrupt_table)
 #if defined(CONFIG_SH_FPU)
 	.long	do_fpu_state_restore	! 48	/* 800 */
 	.long	do_fpu_state_restore	! 49	/* 820 */
-#else
+#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \
+      !defined(CONFIG_CPU_SUBTYPE_SH73180)
 	.long	exception_error
 	.long	exception_error
 #endif
@@ -224,7 +233,7 @@ ENTRY(interrupt_table)
 	.long	exception_error
 	.long	do_IRQ	! ADC	adi
 	.long	do_IRQ	! CMT	cmti	/* FA0 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343)
 	.long	do_IRQ	!  50 0x840
 	.long	do_IRQ	!  51 0x860
 	.long	do_IRQ	!  52 0x880
@@ -379,5 +388,168 @@ ENTRY(interrupt_table)
 	.long	exception_error			! 141 0x13a0
 	.long	exception_error			! 142 0x13c0
 	.long	exception_error			! 143 0x13e0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+	.long	do_IRQ	!  50 0x840
+	.long	do_IRQ	!  51 0x860
+	.long	do_IRQ	!  52 0x880
+	.long	do_IRQ	!  53 0x8a0
+	.long	do_IRQ	!  54 0x8c0
+	.long	do_IRQ	!  55 0x8e0
+	.long	do_IRQ	!  56 0x900
+	.long	do_IRQ	!  57 0x920
+	.long	do_IRQ	!  58 0x940
+	.long	do_IRQ	!  59 0x960
+	.long	do_IRQ	!  60 0x980
+	.long	do_IRQ	!  61 0x9a0
+	.long	do_IRQ	!  62 0x9c0
+	.long	do_IRQ	!  63 0x9e0
+	.long	do_IRQ	!  64 0xa00
+	.long	do_IRQ	!  65 0xa20
+	.long	do_IRQ	!  66 0xa4d
+	.long	do_IRQ	!  67 0xa60
+	.long	do_IRQ	!  68 0xa80
+	.long	do_IRQ	!  69 0xaa0
+	.long	do_IRQ	!  70 0xac0
+	.long	do_IRQ	!  71 0xae0
+	.long	do_IRQ	!  72 0xb00
+	.long	do_IRQ	!  73 0xb20
+	.long	do_IRQ	!  74 0xb40
+	.long	do_IRQ	!  75 0xb60
+	.long	do_IRQ	!  76 0xb80
+	.long	do_IRQ	!  77 0xba0
+	.long	do_IRQ	!  78 0xbc0
+	.long	do_IRQ	!  79 0xbe0
+	.long	do_IRQ	!  80 0xc00
+	.long	do_IRQ	!  81 0xc20
+	.long	do_IRQ	!  82 0xc40
+	.long	do_IRQ	!  83 0xc60
+	.long	do_IRQ	!  84 0xc80
+	.long	do_IRQ	!  85 0xca0
+	.long	do_IRQ	!  86 0xcc0
+	.long	do_IRQ	!  87 0xce0
+	.long	do_IRQ	!  88 0xd00
+	.long	do_IRQ	!  89 0xd20
+	.long	do_IRQ	!  90 0xd40
+	.long	do_IRQ	!  91 0xd60
+	.long	do_IRQ	!  92 0xd80
+	.long	do_IRQ	!  93 0xda0
+	.long	do_IRQ	!  94 0xdc0
+	.long	do_IRQ	!  95 0xde0
+	.long	do_IRQ	!  96 0xe00
+	.long	do_IRQ	!  97 0xe20
+	.long	do_IRQ	!  98 0xe40
+	.long	do_IRQ	!  99 0xe60
+	.long	do_IRQ	! 100 0xe80
+	.long	do_IRQ	! 101 0xea0
+	.long	do_IRQ	! 102 0xec0
+	.long	do_IRQ	! 103 0xee0
+	.long	do_IRQ	! 104 0xf00
+	.long	do_IRQ	! 105 0xf20
+	.long	do_IRQ	! 106 0xf40
+	.long	do_IRQ	! 107 0xf60
+	.long	do_IRQ	! 108 0xf80
+#endif
+#else
+	.long	exception_error		/* 400 */
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! RTC	ati
+	.long	do_IRQ	!	pri
+	.long	do_IRQ	!	cui
+	.long	exception_error
+	.long	exception_error		/* 500 */
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! WDT	iti	/* 560 */
+	.long	do_IRQ	! TMU-ch0
+	.long	do_IRQ	! TMU-ch1
+	.long	do_IRQ	! TMU-ch2
+	.long	do_IRQ	! ticpi2	/* 5E0 */
+	.long	do_IRQ	! 32 Hitachi UDI	/* 600 */
+	.long	exception_error
+	.long	do_IRQ	! 34 DMAC dmte0
+	.long	do_IRQ	! 35	  dmte1
+	.long	do_IRQ	! 36	  dmte2
+	.long	do_IRQ	! 37	  dmte3
+	.long	do_IRQ	! 38	  dmae
+	.long	exception_error			! 39	/* 6E0 */
+	.long	do_IRQ	! 40 SCIF-ch0 eri		/* 700 */
+	.long	do_IRQ	! 41	      rxi
+	.long	do_IRQ	! 42	      bri
+	.long	do_IRQ	! 43	      txi
+	.long	do_IRQ	! 44 DMAC dmte4		/* 780 */
+	.long	do_IRQ	! 45	  dmte5
+	.long	do_IRQ	! 46	  dmte6
+	.long	do_IRQ	! 47	  dmte7		/* 7E0 */
+#if defined(CONFIG_SH_FPU)
+	.long	do_fpu_state_restore	! 48	/* 800 */
+	.long	do_fpu_state_restore	! 49	/* 820 */
+#else
+	.long	exception_error
+	.long	exception_error
+#endif
+	.long	exception_error			/* 840 */
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! 56 CMT	/* 900 */
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! 60 HAC
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! PCI serr	/* A00 */
+	.long	do_IRQ	!     INTA
+	.long	do_IRQ	!     INTB
+	.long	do_IRQ	!     INTC
+	.long	do_IRQ	!     INTD
+	.long	do_IRQ	!     err
+	.long	do_IRQ	!     pwd3
+	.long	do_IRQ	!     pwd2
+	.long	do_IRQ	!     pwd1	/* B00 */
+	.long	do_IRQ	!     pwd0
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! SCIF-ch1 eri	/* B80 */
+	.long	do_IRQ	!	   rxi
+	.long	do_IRQ	!	   bri
+	.long	do_IRQ	!	   txi
+	.long	do_IRQ	! SIOF		/* C00 */
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! HSPI		/* C80 */
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! MMCIF	fatat	/* D00 */
+	.long	do_IRQ	!	tran
+	.long	do_IRQ	!	err
+	.long	do_IRQ	!	frdy
+	.long	do_IRQ	! DMAC dmint8	/* D80 */
+	.long	do_IRQ	!      dmint9
+	.long	do_IRQ	!      dmint10
+	.long	do_IRQ	!      dmint11
+	.long	do_IRQ	! TMU-ch3	/* E00 */
+	.long	do_IRQ	! TMU-ch4
+	.long	do_IRQ	! TMU-ch5
+	.long	exception_error
+	.long	do_IRQ	! SSI
+	.long	exception_error
+	.long	exception_error
+	.long	exception_error
+	.long	do_IRQ	! FLCTL	flste	/* F00 */
+	.long	do_IRQ	!	fltend
+	.long	do_IRQ	!	fltrq0
+	.long	do_IRQ	!	fltrq1
+	.long	do_IRQ	! GPIO gpioi0	/* F80 */
+	.long	do_IRQ	!      gpioi1
+	.long	do_IRQ	!      gpioi2
+	.long	do_IRQ	!      gpioi3
 #endif
 
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 42427b79697..c294de1e14a 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -3,7 +3,7 @@
  *
  * CPU Subtype Probing for SH-4.
  *
- * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt
+ * Copyright (C) 2001 - 2006  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -29,7 +29,7 @@ int __init detect_cpu_and_cache_system(void)
 		[9] = (1 << 16)
 	};
 
-	pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff;
+	pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff;
 	prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
 	cvr = (ctrl_inl(CCN_CVR));
 
@@ -38,7 +38,6 @@ int __init detect_cpu_and_cache_system(void)
 	 */
 	cpu_data->icache.way_incr	= (1 << 13);
 	cpu_data->icache.entry_shift	= 5;
-	cpu_data->icache.entry_mask	= 0x1fe0;
 	cpu_data->icache.sets		= 256;
 	cpu_data->icache.ways		= 1;
 	cpu_data->icache.linesz		= L1_CACHE_BYTES;
@@ -48,13 +47,29 @@ int __init detect_cpu_and_cache_system(void)
 	 */
 	cpu_data->dcache.way_incr	= (1 << 14);
 	cpu_data->dcache.entry_shift	= 5;
-	cpu_data->dcache.entry_mask	= 0x3fe0;
 	cpu_data->dcache.sets		= 512;
 	cpu_data->dcache.ways		= 1;
 	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
 
-	/* Set the FPU flag, virtually all SH-4's have one */
-	cpu_data->flags |= CPU_HAS_FPU;
+	/*
+	 * Setup some generic flags we can probe
+	 * (L2 and DSP detection only work on SH-4A)
+	 */
+	if (((pvr >> 16) & 0xff) == 0x10) {
+		if ((cvr & 0x02000000) == 0)
+			cpu_data->flags |= CPU_HAS_L2_CACHE;
+		if ((cvr & 0x10000000) == 0)
+			cpu_data->flags |= CPU_HAS_DSP;
+
+		cpu_data->flags |= CPU_HAS_LLSC;
+	}
+
+	/* FPU detection works for everyone */
+	if ((cvr & 0x20000000) == 1)
+		cpu_data->flags |= CPU_HAS_FPU;
+
+	/* Mask off the upper chip ID */
+	pvr &= 0xffff;
 
 	/*
 	 * Probe the underlying processor version/revision and
@@ -63,56 +78,101 @@ int __init detect_cpu_and_cache_system(void)
 	switch (pvr) {
 	case 0x205:
 		cpu_data->type = CPU_SH7750;
-		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER;
+		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+				   CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
 		break;
 	case 0x206:
 		cpu_data->type = CPU_SH7750S;
-		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER;
+		cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+				   CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
 		break;
 	case 0x1100:
 		cpu_data->type = CPU_SH7751;
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
 		break;
 	case 0x2000:
 		cpu_data->type = CPU_SH73180;
 		cpu_data->icache.ways = 4;
 		cpu_data->dcache.ways = 4;
-		cpu_data->flags &= ~CPU_HAS_FPU;
+		cpu_data->flags |= CPU_HAS_LLSC;
+		break;
+	case 0x2001:
+	case 0x2004:
+		cpu_data->type = CPU_SH7770;
+		cpu_data->icache.ways = 4;
+		cpu_data->dcache.ways = 4;
+
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
+		break;
+	case 0x2006:
+	case 0x200A:
+		if (prr == 0x61)
+			cpu_data->type = CPU_SH7781;
+		else
+			cpu_data->type = CPU_SH7780;
+
+		cpu_data->icache.ways = 4;
+		cpu_data->dcache.ways = 4;
+
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+				   CPU_HAS_LLSC;
+		break;
+	case 0x3000:
+	case 0x3003:
+		cpu_data->type = CPU_SH7343;
+		cpu_data->icache.ways = 4;
+		cpu_data->dcache.ways = 4;
+		cpu_data->flags |= CPU_HAS_LLSC;
 		break;
 	case 0x8000:
 		cpu_data->type = CPU_ST40RA;
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
 		break;
 	case 0x8100:
 		cpu_data->type = CPU_ST40GX1;
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
 		break;
 	case 0x700:
 		cpu_data->type = CPU_SH4_501;
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
-
-		/* No FPU on the SH4-500 series.. */
-		cpu_data->flags &= ~CPU_HAS_FPU;
+		cpu_data->flags |= CPU_HAS_PTEA;
 		break;
 	case 0x600:
 		cpu_data->type = CPU_SH4_202;
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
 		break;
 	case 0x500 ... 0x501:
 		switch (prr) {
-		    case 0x10: cpu_data->type = CPU_SH7750R; break;
-		    case 0x11: cpu_data->type = CPU_SH7751R; break;
-		    case 0x50: cpu_data->type = CPU_SH7760;  break;
+		case 0x10:
+			cpu_data->type = CPU_SH7750R;
+			break;
+		case 0x11:
+			cpu_data->type = CPU_SH7751R;
+			break;
+		case 0x50 ... 0x5f:
+			cpu_data->type = CPU_SH7760;
+			break;
 		}
 
 		cpu_data->icache.ways = 2;
 		cpu_data->dcache.ways = 2;
 
+		cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+
 		break;
 	default:
 		cpu_data->type = CPU_SH_NONE;
 		break;
 	}
 
+#ifdef CONFIG_SH_DIRECT_MAPPED
+	cpu_data->icache.ways = 1;
+	cpu_data->dcache.ways = 1;
+#endif
+
 	/*
 	 * On anything that's not a direct-mapped cache, look to the CVR
 	 * for I/D-cache specifics.
@@ -121,18 +181,56 @@ int __init detect_cpu_and_cache_system(void)
 		size = sizes[(cvr >> 20) & 0xf];
 		cpu_data->icache.way_incr	= (size >> 1);
 		cpu_data->icache.sets		= (size >> 6);
-		cpu_data->icache.entry_mask	=
-			(cpu_data->icache.way_incr - (1 << 5));
+
 	}
 
+	/* Setup the rest of the I-cache info */
+	cpu_data->icache.entry_mask = cpu_data->icache.way_incr -
+				      cpu_data->icache.linesz;
+
+	cpu_data->icache.way_size = cpu_data->icache.sets *
+				    cpu_data->icache.linesz;
+
+	/* And the rest of the D-cache */
 	if (cpu_data->dcache.ways > 1) {
 		size = sizes[(cvr >> 16) & 0xf];
 		cpu_data->dcache.way_incr	= (size >> 1);
 		cpu_data->dcache.sets		= (size >> 6);
-		cpu_data->dcache.entry_mask	=
-			(cpu_data->dcache.way_incr - (1 << 5));
+	}
+
+	cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr -
+				      cpu_data->dcache.linesz;
+
+	cpu_data->dcache.way_size = cpu_data->dcache.sets *
+				    cpu_data->dcache.linesz;
+
+	/*
+	 * Setup the L2 cache desc
+	 *
+	 * SH-4A's have an optional PIPT L2.
+	 */
+	if (cpu_data->flags & CPU_HAS_L2_CACHE) {
+		/*
+		 * Size calculation is much more sensible
+		 * than it is for the L1.
+		 *
+		 * Sizes are 128KB, 258KB, 512KB, and 1MB.
+		 */
+		size = (cvr & 0xf) << 17;
+
+		BUG_ON(!size);
+
+		cpu_data->scache.way_incr	= (1 << 16);
+		cpu_data->scache.entry_shift	= 5;
+		cpu_data->scache.ways		= 4;
+		cpu_data->scache.linesz		= L1_CACHE_BYTES;
+		cpu_data->scache.entry_mask	=
+			(cpu_data->scache.way_incr - cpu_data->scache.linesz);
+		cpu_data->scache.sets		= size /
+			(cpu_data->scache.linesz * cpu_data->scache.ways);
+		cpu_data->scache.way_size	=
+			(cpu_data->scache.sets * cpu_data->scache.linesz);
 	}
 
 	return 0;
 }
-
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
new file mode 100644
index 00000000000..6e4e9654135
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -0,0 +1,43 @@
+/*
+ * SH4-202 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe80000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh4202_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh4202_devices_setup(void)
+{
+	return platform_add_devices(sh4202_devices,
+				    ARRAY_SIZE(sh4202_devices));
+}
+__initcall(sh4202_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh73180.c b/arch/sh/kernel/cpu/sh4/setup-sh73180.c
new file mode 100644
index 00000000000..cc9ea1e2e5d
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh73180.c
@@ -0,0 +1,43 @@
+/*
+ * SH73180 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe80000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 80, 81, 83, 82 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh73180_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh73180_devices_setup(void)
+{
+	return platform_add_devices(sh73180_devices,
+				    ARRAY_SIZE(sh73180_devices));
+}
+__initcall(sh73180_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7343.c b/arch/sh/kernel/cpu/sh4/setup-sh7343.c
new file mode 100644
index 00000000000..91d61cf91ba
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7343.c
@@ -0,0 +1,43 @@
+/*
+ * SH7343 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe00000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 80, 81, 83, 82 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7343_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7343_devices_setup(void)
+{
+	return platform_add_devices(sh7343_devices,
+				    ARRAY_SIZE(sh7343_devices));
+}
+__initcall(sh7343_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
new file mode 100644
index 00000000000..50812d57c1c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -0,0 +1,48 @@
+/*
+ * SH7750/SH7751 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe00000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 23, 24, 25, 0 },
+	}, {
+		.mapbase	= 0xffe80000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7750_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7750_devices_setup(void)
+{
+	return platform_add_devices(sh7750_devices,
+				    ARRAY_SIZE(sh7750_devices));
+}
+__initcall(sh7750_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
new file mode 100644
index 00000000000..97f1c9af35d
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -0,0 +1,53 @@
+/*
+ * SH7760 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfe600000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.mapbase	= 0xfe610000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 72, 73, 75, 74 },
+	}, {
+		.mapbase	= 0xfe620000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 76, 77, 79, 78 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7760_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7760_devices_setup(void)
+{
+	return platform_add_devices(sh7760_devices,
+				    ARRAY_SIZE(sh7760_devices));
+}
+__initcall(sh7760_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7770.c b/arch/sh/kernel/cpu/sh4/setup-sh7770.c
new file mode 100644
index 00000000000..6a04cc5f5ac
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7770.c
@@ -0,0 +1,53 @@
+/*
+ * SH7770 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xff923000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 61, 61, 61, 61 },
+	}, {
+		.mapbase	= 0xff924000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 62, 62, 62, 62 },
+	}, {
+		.mapbase	= 0xff925000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 63, 63, 63, 63 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7770_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7770_devices_setup(void)
+{
+	return platform_add_devices(sh7770_devices,
+				    ARRAY_SIZE(sh7770_devices));
+}
+__initcall(sh7770_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
new file mode 100644
index 00000000000..72493f259ed
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
@@ -0,0 +1,79 @@
+/*
+ * SH7780 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffe80000,
+		.end	= 0xffe80000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 22,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 23,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe00000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 76, 77, 79, 78 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7780_devices[] __initdata = {
+	&rtc_device,
+	&sci_device,
+};
+
+static int __init sh7780_devices_setup(void)
+{
+	return platform_add_devices(sh7780_devices,
+				    ARRAY_SIZE(sh7780_devices));
+}
+__initcall(sh7780_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index b09805f3ee2..7bcc73f9b8d 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -1,49 +1,52 @@
 /*
- * arch/sh/kernel/cpu/sq.c
+ * arch/sh/kernel/cpu/sh4/sq.c
  *
  * General management API for SH-4 integrated Store Queues
  *
- * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt
+ * Copyright (C) 2001 - 2006  Paul Mundt
  * Copyright (C) 2001, 2002  M. R. Brown
  *
- * Some of this code has been adopted directly from the old arch/sh/mm/sq.c
- * hack that was part of the LinuxDC project. For all intents and purposes,
- * this is a completely new interface that really doesn't have much in common
- * with the old zone-based approach at all. In fact, it's only listed here for
- * general completeness.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/bitmap.h>
+#include <linux/sysdev.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
 #include <linux/vmalloc.h>
-
+#include <linux/mm.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
 #include <asm/cpu/sq.h>
 
-static LIST_HEAD(sq_mapping_list);
+struct sq_mapping;
+
+struct sq_mapping {
+	const char *name;
+
+	unsigned long sq_addr;
+	unsigned long addr;
+	unsigned int size;
+
+	struct sq_mapping *next;
+};
+
+static struct sq_mapping *sq_mapping_list;
 static DEFINE_SPINLOCK(sq_mapping_lock);
+static kmem_cache_t *sq_cache;
+static unsigned long *sq_bitmap;
 
-/**
- * sq_flush - Flush (prefetch) the store queue cache
- * @addr: the store queue address to flush
- *
- * Executes a prefetch instruction on the specified store queue cache,
- * so that the cached data is written to physical memory.
- */
-inline void sq_flush(void *addr)
-{
-	__asm__ __volatile__ ("pref @%0" : : "r" (addr) : "memory");
-}
+#define store_queue_barrier()			\
+do {						\
+	(void)ctrl_inl(P4SEG_STORE_QUE);	\
+	ctrl_outl(0, P4SEG_STORE_QUE + 0);	\
+	ctrl_outl(0, P4SEG_STORE_QUE + 8);	\
+} while (0);
 
 /**
  * sq_flush_range - Flush (prefetch) a specific SQ range
@@ -56,152 +59,73 @@ inline void sq_flush(void *addr)
 void sq_flush_range(unsigned long start, unsigned int len)
 {
 	volatile unsigned long *sq = (unsigned long *)start;
-	unsigned long dummy;
 
 	/* Flush the queues */
 	for (len >>= 5; len--; sq += 8)
-		sq_flush((void *)sq);
+		prefetchw((void *)sq);
 
 	/* Wait for completion */
-	dummy = ctrl_inl(P4SEG_STORE_QUE);
-
-	ctrl_outl(0, P4SEG_STORE_QUE + 0);
-	ctrl_outl(0, P4SEG_STORE_QUE + 8);
+	store_queue_barrier();
 }
 
-static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long phys, unsigned long size, const char *name)
+static inline void sq_mapping_list_add(struct sq_mapping *map)
 {
-	struct sq_mapping *map;
-
-	if (virt + size > SQ_ADDRMAX)
-		return ERR_PTR(-ENOSPC);
-
-	map = kmalloc(sizeof(struct sq_mapping), GFP_KERNEL);
-	if (!map)
-		return ERR_PTR(-ENOMEM);
+	struct sq_mapping **p, *tmp;
 
-	INIT_LIST_HEAD(&map->list);
+	spin_lock_irq(&sq_mapping_lock);
 
-	map->sq_addr	= virt;
-	map->addr	= phys;
-	map->size	= size + 1;
-	map->name	= name;
+	p = &sq_mapping_list;
+	while ((tmp = *p) != NULL)
+		p = &tmp->next;
 
-	list_add(&map->list, &sq_mapping_list);
+	map->next = tmp;
+	*p = map;
 
-	return map;
+	spin_unlock_irq(&sq_mapping_lock);
 }
 
-static unsigned long __sq_get_next_addr(void)
+static inline void sq_mapping_list_del(struct sq_mapping *map)
 {
-	if (!list_empty(&sq_mapping_list)) {
-		struct list_head *pos, *tmp;
-
-		/*
-		 * Read one off the list head, as it will have the highest
-		 * mapped allocation. Set the next one up right above it.
-		 *
-		 * This is somewhat sub-optimal, as we don't look at
-		 * gaps between allocations or anything lower then the
-		 * highest-level allocation.
-		 *
-		 * However, in the interest of performance and the general
-		 * lack of desire to do constant list rebalancing, we don't
-		 * worry about it.
-		 */
-		list_for_each_safe(pos, tmp, &sq_mapping_list) {
-			struct sq_mapping *entry;
-
-			entry = list_entry(pos, typeof(*entry), list);
-
-			return entry->sq_addr + entry->size;
+	struct sq_mapping **p, *tmp;
+
+	spin_lock_irq(&sq_mapping_lock);
+
+	for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
+		if (tmp == map) {
+			*p = tmp->next;
+			break;
 		}
-	}
 
-	return P4SEG_STORE_QUE;
+	spin_unlock_irq(&sq_mapping_lock);
 }
 
-/**
- * __sq_remap - Perform a translation from the SQ to a phys addr
- * @map: sq mapping containing phys and store queue addresses.
- *
- * Maps the store queue address specified in the mapping to the physical
- * address specified in the mapping.
- */
-static struct sq_mapping *__sq_remap(struct sq_mapping *map)
+static int __sq_remap(struct sq_mapping *map, unsigned long flags)
 {
-	unsigned long flags, pteh, ptel;
+#if defined(CONFIG_MMU)
 	struct vm_struct *vma;
-	pgprot_t pgprot;
-
-	/*
-	 * Without an MMU (or with it turned off), this is much more
-	 * straightforward, as we can just load up each queue's QACR with
-	 * the physical address appropriately masked.
-	 */
-
-	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
-	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
 
-#ifdef CONFIG_MMU
-	/*
-	 * With an MMU on the other hand, things are slightly more involved.
-	 * Namely, we have to have a direct mapping between the SQ addr and
-	 * the associated physical address in the UTLB by way of setting up
-	 * a virt<->phys translation by hand. We do this by simply specifying
-	 * the SQ addr in UTLB.VPN and the associated physical address in
-	 * UTLB.PPN.
-	 *
-	 * Notably, even though this is a special case translation, and some
-	 * of the configuration bits are meaningless, we're still required
-	 * to have a valid ASID context in PTEH.
-	 *
-	 * We could also probably get by without explicitly setting PTEA, but
-	 * we do it here just for good measure.
-	 */
-	spin_lock_irqsave(&sq_mapping_lock, flags);
-
-	pteh = map->sq_addr;
-	ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH);
-
-	ptel = map->addr & PAGE_MASK;
-	ctrl_outl(((ptel >> 28) & 0xe) | (ptel & 0x1), MMU_PTEA);
-
-	pgprot = pgprot_noncached(PAGE_KERNEL);
-
-	ptel &= _PAGE_FLAGS_HARDWARE_MASK;
-	ptel |= pgprot_val(pgprot);
-	ctrl_outl(ptel, MMU_PTEL);
-
-	__asm__ __volatile__ ("ldtlb" : : : "memory");
-
-	spin_unlock_irqrestore(&sq_mapping_lock, flags);
-
-	/*
-	 * Next, we need to map ourselves in the kernel page table, so that
-	 * future accesses after a TLB flush will be handled when we take a
-	 * page fault.
-	 *
-	 * Theoretically we could just do this directly and not worry about
-	 * setting up the translation by hand ahead of time, but for the
-	 * cases where we want a one-shot SQ mapping followed by a quick
-	 * writeout before we hit the TLB flush, we do it anyways. This way
-	 * we at least save ourselves the initial page fault overhead.
-	 */
 	vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
 	if (!vma)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	vma->phys_addr = map->addr;
 
 	if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr,
-			     map->size, pgprot_val(pgprot))) {
+			     map->size, flags)) {
 		vunmap(vma->addr);
-		return NULL;
+		return -EAGAIN;
 	}
-#endif /* CONFIG_MMU */
+#else
+	/*
+	 * Without an MMU (or with it turned off), this is much more
+	 * straightforward, as we can just load up each queue's QACR with
+	 * the physical address appropriately masked.
+	 */
+	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
+	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
+#endif
 
-	return map;
+	return 0;
 }
 
 /**
@@ -209,42 +133,65 @@ static struct sq_mapping *__sq_remap(struct sq_mapping *map)
  * @phys: Physical address of mapping.
  * @size: Length of mapping.
  * @name: User invoking mapping.
+ * @flags: Protection flags.
  *
  * Remaps the physical address @phys through the next available store queue
  * address of @size length. @name is logged at boot time as well as through
- * the procfs interface.
- *
- * A pre-allocated and filled sq_mapping pointer is returned, and must be
- * cleaned up with a call to sq_unmap() when the user is done with the
- * mapping.
+ * the sysfs interface.
  */
-struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name)
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+		       const char *name, unsigned long flags)
 {
 	struct sq_mapping *map;
-	unsigned long virt, end;
+	unsigned long end;
 	unsigned int psz;
+	int ret, page;
 
 	/* Don't allow wraparound or zero size */
 	end = phys + size - 1;
-	if (!size || end < phys)
-		return NULL;
+	if (unlikely(!size || end < phys))
+		return -EINVAL;
 	/* Don't allow anyone to remap normal memory.. */
-	if (phys < virt_to_phys(high_memory))
-		return NULL;
+	if (unlikely(phys < virt_to_phys(high_memory)))
+		return -EINVAL;
 
 	phys &= PAGE_MASK;
+	size = PAGE_ALIGN(end + 1) - phys;
+
+	map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
+	if (unlikely(!map))
+		return -ENOMEM;
+
+	map->addr = phys;
+	map->size = size;
+	map->name = name;
+
+	page = bitmap_find_free_region(sq_bitmap, 0x04000000,
+				       get_order(map->size));
+	if (unlikely(page < 0)) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
+
+	ret = __sq_remap(map, flags);
+	if (unlikely(ret != 0))
+		goto out;
+
+	psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	pr_info("sqremap: %15s  [%4d page%s]  va 0x%08lx   pa 0x%08lx\n",
+		likely(map->name) ? map->name : "???",
+		psz, psz == 1 ? " " : "s",
+		map->sq_addr, map->addr);
 
-	size  = PAGE_ALIGN(end + 1) - phys;
-	virt  = __sq_get_next_addr();
-	psz   = (size + (PAGE_SIZE - 1)) / PAGE_SIZE;
-	map   = __sq_alloc_mapping(virt, phys, size, name);
+	sq_mapping_list_add(map);
 
-	printk("sqremap: %15s  [%4d page%s]  va 0x%08lx   pa 0x%08lx\n",
-	       map->name ? map->name : "???",
-	       psz, psz == 1 ? " " : "s",
-	       map->sq_addr, map->addr);
+	return map->sq_addr;
 
-	return __sq_remap(map);
+out:
+	kmem_cache_free(sq_cache, map);
+	return ret;
 }
 
 /**
@@ -255,188 +202,198 @@ struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *n
  * sq_remap(). Also frees up the pte that was previously inserted into
  * the kernel page table and discards the UTLB translation.
  */
-void sq_unmap(struct sq_mapping *map)
+void sq_unmap(unsigned long vaddr)
 {
-	if (map->sq_addr > (unsigned long)high_memory)
-		vfree((void *)(map->sq_addr & PAGE_MASK));
+	struct sq_mapping **p, *map;
+	struct vm_struct *vma;
+	int page;
 
-	list_del(&map->list);
-	kfree(map);
-}
+	for (p = &sq_mapping_list; (map = *p); p = &map->next)
+		if (map->sq_addr == vaddr)
+			break;
 
-/**
- * sq_clear - Clear a store queue range
- * @addr: Address to start clearing from.
- * @len: Length to clear.
- *
- * A quick zero-fill implementation for clearing out memory that has been
- * remapped through the store queues.
- */
-void sq_clear(unsigned long addr, unsigned int len)
-{
-	int i;
+	if (unlikely(!map)) {
+		printk("%s: bad store queue address 0x%08lx\n",
+		       __FUNCTION__, vaddr);
+		return;
+	}
 
-	/* Clear out both queues linearly */
-	for (i = 0; i < 8; i++) {
-		ctrl_outl(0, addr + i + 0);
-		ctrl_outl(0, addr + i + 8);
+	page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
+	bitmap_release_region(sq_bitmap, page, get_order(map->size));
+
+#ifdef CONFIG_MMU
+	vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
+	if (!vma) {
+		printk(KERN_ERR "%s: bad address 0x%08lx\n",
+		       __FUNCTION__, map->sq_addr);
+		return;
 	}
+#endif
+
+	sq_mapping_list_del(map);
 
-	sq_flush_range(addr, len);
+	kmem_cache_free(sq_cache, map);
 }
 
-/**
- * sq_vma_unmap - Unmap a VMA range
- * @area: VMA containing range.
- * @addr: Start of range.
- * @len: Length of range.
+/*
+ * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
+ * there is any other easy way to add things on a per-cpu basis without
+ * putting the directory entries somewhere stupid and having to create
+ * links in sysfs by hand back in to the per-cpu directories.
  *
- * Searches the sq_mapping_list for a mapping matching the sq addr @addr,
- * and subsequently frees up the entry. Further cleanup is done by generic
- * code.
+ * Some day we may want to have an additional abstraction per store
+ * queue, but considering the kobject hell we already have to deal with,
+ * it's simply not worth the trouble.
  */
-static void sq_vma_unmap(struct vm_area_struct *area,
-			 unsigned long addr, size_t len)
-{
-	struct list_head *pos, *tmp;
+static struct kobject *sq_kobject[NR_CPUS];
 
-	list_for_each_safe(pos, tmp, &sq_mapping_list) {
-		struct sq_mapping *entry;
+struct sq_sysfs_attr {
+	struct attribute attr;
+	ssize_t (*show)(char *buf);
+	ssize_t (*store)(const char *buf, size_t count);
+};
 
-		entry = list_entry(pos, typeof(*entry), list);
+#define to_sq_sysfs_attr(attr)	container_of(attr, struct sq_sysfs_attr, attr)
 
-		if (entry->sq_addr == addr) {
-			/*
-			 * We could probably get away without doing the tlb flush
-			 * here, as generic code should take care of most of this
-			 * when unmapping the rest of the VMA range for us. Leave
-			 * it in for added sanity for the time being..
-			 */
-			__flush_tlb_page(get_asid(), entry->sq_addr & PAGE_MASK);
+static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
+			     char *buf)
+{
+	struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
 
-			list_del(&entry->list);
-			kfree(entry);
+	if (likely(sattr->show))
+		return sattr->show(buf);
 
-			return;
-		}
-	}
+	return -EIO;
 }
 
-/**
- * sq_vma_sync - Sync a VMA range
- * @area: VMA containing range.
- * @start: Start of range.
- * @len: Length of range.
- * @flags: Additional flags.
- *
- * Synchronizes an sq mapped range by flushing the store queue cache for
- * the duration of the mapping.
- *
- * Used internally for user mappings, which must use msync() to prefetch
- * the store queue cache.
- */
-static int sq_vma_sync(struct vm_area_struct *area,
-		       unsigned long start, size_t len, unsigned int flags)
+static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
+			      const char *buf, size_t count)
 {
-	sq_flush_range(start, len);
+	struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
 
-	return 0;
+	if (likely(sattr->store))
+		return sattr->store(buf, count);
+
+	return -EIO;
 }
 
-static struct vm_operations_struct sq_vma_ops = {
-	.unmap	= sq_vma_unmap,
-	.sync	= sq_vma_sync,
-};
+static ssize_t mapping_show(char *buf)
+{
+	struct sq_mapping **list, *entry;
+	char *p = buf;
 
-/**
- * sq_mmap - mmap() for /dev/cpu/sq
- * @file: unused.
- * @vma: VMA to remap.
- *
- * Remap the specified vma @vma through the store queues, and setup associated
- * information for the new mapping. Also build up the page tables for the new
- * area.
- */
-static int sq_mmap(struct file *file, struct vm_area_struct *vma)
+	for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
+		p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
+			     entry->sq_addr, entry->sq_addr + entry->size,
+			     entry->addr, entry->name);
+
+	return p - buf;
+}
+
+static ssize_t mapping_store(const char *buf, size_t count)
 {
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-	unsigned long size = vma->vm_end - vma->vm_start;
-	struct sq_mapping *map;
+	unsigned long base = 0, len = 0;
 
-	/*
-	 * We're not interested in any arbitrary virtual address that has
-	 * been stuck in the VMA, as we already know what addresses we
-	 * want. Save off the size, and reposition the VMA to begin at
-	 * the next available sq address.
-	 */
-	vma->vm_start = __sq_get_next_addr();
-	vma->vm_end   = vma->vm_start + size;
+	sscanf(buf, "%lx %lx", &base, &len);
+	if (!base)
+		return -EIO;
 
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	if (likely(len)) {
+		int ret = sq_remap(base, len, "Userspace",
+				   pgprot_val(PAGE_SHARED));
+		if (ret < 0)
+			return ret;
+	} else
+		sq_unmap(base);
 
-	vma->vm_flags |= VM_IO | VM_RESERVED;
+	return count;
+}
 
-	map = __sq_alloc_mapping(vma->vm_start, offset, size, "Userspace");
+static struct sq_sysfs_attr mapping_attr =
+	__ATTR(mapping, 0644, mapping_show, mapping_store);
 
-	if (io_remap_pfn_range(vma, map->sq_addr, map->addr >> PAGE_SHIFT,
-				size, vma->vm_page_prot))
-		return -EAGAIN;
+static struct attribute *sq_sysfs_attrs[] = {
+	&mapping_attr.attr,
+	NULL,
+};
 
-	vma->vm_ops = &sq_vma_ops;
+static struct sysfs_ops sq_sysfs_ops = {
+	.show	= sq_sysfs_show,
+	.store	= sq_sysfs_store,
+};
 
-	return 0;
-}
+static struct kobj_type ktype_percpu_entry = {
+	.sysfs_ops	= &sq_sysfs_ops,
+	.default_attrs	= sq_sysfs_attrs,
+};
 
-#ifdef CONFIG_PROC_FS
-static int sq_mapping_read_proc(char *buf, char **start, off_t off,
-				int len, int *eof, void *data)
+static int __devinit sq_sysdev_add(struct sys_device *sysdev)
 {
-	struct list_head *pos;
-	char *p = buf;
+	unsigned int cpu = sysdev->id;
+	struct kobject *kobj;
 
-	list_for_each_prev(pos, &sq_mapping_list) {
-		struct sq_mapping *entry;
+	sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (unlikely(!sq_kobject[cpu]))
+		return -ENOMEM;
 
-		entry = list_entry(pos, typeof(*entry), list);
+	kobj = sq_kobject[cpu];
+	kobj->parent = &sysdev->kobj;
+	kobject_set_name(kobj, "%s", "sq");
+	kobj->ktype = &ktype_percpu_entry;
 
-		p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n", entry->sq_addr,
-			     entry->sq_addr + entry->size - 1, entry->addr,
-			     entry->name);
-	}
-
-	return p - buf;
+	return kobject_register(kobj);
 }
-#endif
 
-static struct file_operations sq_fops = {
-	.owner		= THIS_MODULE,
-	.mmap		= sq_mmap,
-};
+static int __devexit sq_sysdev_remove(struct sys_device *sysdev)
+{
+	unsigned int cpu = sysdev->id;
+	struct kobject *kobj = sq_kobject[cpu];
 
-static struct miscdevice sq_dev = {
-	.minor		= STORE_QUEUE_MINOR,
-	.name		= "sq",
-	.fops		= &sq_fops,
+	kobject_unregister(kobj);
+	return 0;
+}
+
+static struct sysdev_driver sq_sysdev_driver = {
+	.add		= sq_sysdev_add,
+	.remove		= __devexit_p(sq_sysdev_remove),
 };
 
 static int __init sq_api_init(void)
 {
-	int ret;
+	unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
+	unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
+	int ret = -ENOMEM;
+
 	printk(KERN_NOTICE "sq: Registering store queue API.\n");
 
-	create_proc_read_entry("sq_mapping", 0, 0, sq_mapping_read_proc, 0);
+	sq_cache = kmem_cache_create("store_queue_cache",
+				sizeof(struct sq_mapping), 0, 0,
+				NULL, NULL);
+	if (unlikely(!sq_cache))
+		return ret;
 
-	ret = misc_register(&sq_dev);
-	if (ret)
-		remove_proc_entry("sq_mapping", NULL);
+	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	if (unlikely(!sq_bitmap))
+		goto out;
+
+	ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver);
+	if (unlikely(ret != 0))
+		goto out;
+
+	return 0;
+
+out:
+	kfree(sq_bitmap);
+	kmem_cache_destroy(sq_cache);
 
 	return ret;
 }
 
 static void __exit sq_api_exit(void)
 {
-	misc_deregister(&sq_dev);
-	remove_proc_entry("sq_mapping", NULL);
+	sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver);
+	kfree(sq_bitmap);
+	kmem_cache_destroy(sq_cache);
 }
 
 module_init(sq_api_init);
@@ -445,11 +402,7 @@ module_exit(sq_api_exit);
 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
 MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(STORE_QUEUE_MINOR);
 
 EXPORT_SYMBOL(sq_remap);
 EXPORT_SYMBOL(sq_unmap);
-EXPORT_SYMBOL(sq_clear);
-EXPORT_SYMBOL(sq_flush);
 EXPORT_SYMBOL(sq_flush_range);
-
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 1378db375e1..a00022722e9 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 1999, 2000  Niibe Yutaka
  *  Copyright (C) 2002  M. R. Brown
- *  Copyright (C) 2004  Paul Mundt
+ *  Copyright (C) 2004 - 2006  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -49,7 +49,7 @@ static int __init sh_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct console early_console = {
+static struct console bios_console = {
 	.name		= "bios",
 	.write		= sh_console_write,
 	.setup		= sh_console_setup,
@@ -59,34 +59,43 @@ static struct console early_console = {
 #endif
 
 #ifdef CONFIG_EARLY_SCIF_CONSOLE
+#include <linux/serial_core.h>
+#include "../../../drivers/serial/sh-sci.h"
+
+#ifdef CONFIG_CPU_SH4
 #define SCIF_REG	0xffe80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
+#define SCIF_REG	0xfffe9800
+#else
+#error "Undefined SCIF for this subtype"
+#endif
+
+static struct uart_port scif_port = {
+	.mapbase	= SCIF_REG,
+	.membase	= (char __iomem *)SCIF_REG,
+};
 
 static void scif_sercon_putc(int c)
 {
-	while (!(ctrl_inw(SCIF_REG + 0x10) & 0x20)) ;
+	while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16))
+		;
 
-	ctrl_outb(c, SCIF_REG + 12);
-	ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0x9f), SCIF_REG + 0x10);
+	sci_out(&scif_port, SCxTDR, c);
+	sci_in(&scif_port, SCxSR);
+	sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
+
+	while ((sci_in(&scif_port, SCxSR) & 0x40) == 0);
+		;
 
 	if (c == '\n')
 		scif_sercon_putc('\r');
 }
 
-static void scif_sercon_flush(void)
-{
-	ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10);
-
-	while (!(ctrl_inw(SCIF_REG + 0x10) & 0x40)) ;
-
-	ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10);
-}
-
-static void scif_sercon_write(struct console *con, const char *s, unsigned count)
+static void scif_sercon_write(struct console *con, const char *s,
+			      unsigned count)
 {
 	while (count-- > 0)
 		scif_sercon_putc(*s++);
-
-	scif_sercon_flush();
 }
 
 static int __init scif_sercon_setup(struct console *con, char *options)
@@ -96,7 +105,7 @@ static int __init scif_sercon_setup(struct console *con, char *options)
 	return 0;
 }
 
-static struct console early_console = {
+static struct console scif_console = {
 	.name		= "sercon",
 	.write		= scif_sercon_write,
 	.setup		= scif_sercon_setup,
@@ -104,7 +113,7 @@ static struct console early_console = {
 	.index		= -1,
 };
 
-void scif_sercon_init(int baud)
+static void scif_sercon_init(int baud)
 {
 	ctrl_outw(0, SCIF_REG + 8);
 	ctrl_outw(0, SCIF_REG);
@@ -122,16 +131,61 @@ void scif_sercon_init(int baud)
 }
 #endif
 
-void __init enable_early_printk(void)
+/*
+ * Setup a default console, if more than one is compiled in, rely on the
+ * earlyprintk= parsing to give priority.
+ */
+static struct console *early_console =
+#ifdef CONFIG_SH_STANDARD_BIOS
+	&bios_console
+#elif defined(CONFIG_EARLY_SCIF_CONSOLE)
+	&scif_console
+#else
+	NULL
+#endif
+	;
+
+static int __initdata keep_early;
+
+int __init setup_early_printk(char *opt)
 {
-#ifdef CONFIG_EARLY_SCIF_CONSOLE
-	scif_sercon_init(115200);
+	char *space;
+	char buf[256];
+
+	strlcpy(buf, opt, sizeof(buf));
+	space = strchr(buf, ' ');
+	if (space)
+		*space = 0;
+
+	if (strstr(buf, "keep"))
+		keep_early = 1;
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+	if (!strncmp(buf, "bios", 4))
+		early_console = &bios_console;
+#endif
+#if defined(CONFIG_EARLY_SCIF_CONSOLE)
+	if (!strncmp(buf, "serial", 6)) {
+		early_console = &scif_console;
+
+#ifdef CONFIG_CPU_SH4
+		scif_sercon_init(115200);
+#endif
+	}
 #endif
-	register_console(&early_console);
+
+	if (likely(early_console))
+		register_console(early_console);
+
+	return 1;
 }
+__setup("earlyprintk=", setup_early_printk);
 
-void disable_early_printk(void)
+void __init disable_early_printk(void)
 {
-	unregister_console(&early_console);
+	if (!keep_early) {
+		printk("disabling early console\n");
+		unregister_console(early_console);
+	} else
+		printk("keeping early console\n");
 }
-
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S
index 7dfd2ba75f7..fe8221855b2 100644
--- a/arch/sh/kernel/entry.S
+++ b/arch/sh/kernel/entry.S
@@ -18,24 +18,6 @@
 #include <asm/cpu/mmu_context.h>
 #include <asm/unistd.h>
 
-#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
-#define sys_nfsservctl		sys_ni_syscall
-#endif
-
-#if !defined(CONFIG_MMU)
-#define sys_madvise		sys_ni_syscall
-#define sys_readahead		sys_ni_syscall
-#define sys_mprotect		sys_ni_syscall
-#define sys_msync		sys_ni_syscall
-#define sys_mlock		sys_ni_syscall
-#define sys_munlock		sys_ni_syscall
-#define sys_mlockall		sys_ni_syscall
-#define sys_munlockall		sys_ni_syscall
-#define sys_mremap		sys_ni_syscall
-#define sys_mincore		sys_ni_syscall
-#define sys_remap_file_pages	sys_ni_syscall
-#endif
-
 ! NOTE:
 ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
 ! to be jumped is too far, but it causes illegal slot exception.
@@ -326,7 +308,7 @@ ENTRY(exception_error)
 	.align	2
 ret_from_exception:
 	preempt_stop()
-ret_from_irq:
+ENTRY(ret_from_irq)
 	!
 	mov	#OFF_SR, r0
 	mov.l	@(r0,r15), r0	! get status register
@@ -389,11 +371,12 @@ work_pending:
 	! r8: current_thread_info
 	! t:  result of "tst	#_TIF_NEED_RESCHED, r0"
 	bf/s	work_resched
-	 tst	#_TIF_SIGPENDING, r0
+	 tst	#(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
 work_notifysig:
 	bt/s	restore_all
 	 mov	r15, r4
-	mov	#0, r5
+	mov	r12, r5		! set arg1(save_r0)
+	mov	r0, r6
 	mov.l	2f, r1
 	mova	restore_all, r0
 	jmp	@r1
@@ -431,7 +414,7 @@ work_resched:
 
 	.align	2
 1:	.long	schedule
-2:	.long	do_signal
+2:	.long	do_notify_resume
 
 	.align	2
 syscall_exit_work:
@@ -552,6 +535,7 @@ syscall_call:
 	mov.l	@r9, r8
 	jsr	@r8	    	! jump to specific syscall handler
 	 nop
+	mov.l	@(OFF_R0,r15), r12		! save r0
 	mov.l	r0, @(OFF_R0,r15)		! save the return value
 	!
 syscall_exit:
@@ -644,7 +628,7 @@ skip_restore:
 	!
 #if defined(CONFIG_KGDB_NMI)
 	! Clear in_nmi
-	mov.l	4f, k0
+	mov.l	6f, k0
 	mov	#0, k1
 	mov.b	k1, @k0
 #endif
@@ -722,7 +706,7 @@ interrupt:
 !
 !
 	.align	2
-handle_exception:
+ENTRY(handle_exception)
 	! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
 	! save all registers onto stack.
 	!
@@ -732,8 +716,8 @@ handle_exception:
 	bt/s	1f		! It's a kernel to kernel transition.
 	 mov	r15, k0		! save original stack to k0
 	/* User space to kernel */
-	mov	#0x20, k1
-	shll8	k1		! k1 := 8192 (== THREAD_SIZE)
+	mov	#(THREAD_SIZE >> 8), k1
+	shll8	k1		! k1 := THREAD_SIZE
 	add	current, k1
 	mov	k1, r15		! change to kernel stack
 	!
@@ -838,300 +822,3 @@ ENTRY(exception_none)
 	rts
 	 nop
 
-	.data
-ENTRY(sys_call_table)
-	.long sys_ni_syscall	/* 0  -  old "setup()" system call*/
-	.long sys_exit
-	.long sys_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open		/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink		/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod		/* 15 */
-	.long sys_lchown16
-	.long sys_ni_syscall	/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid		/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid16
-	.long sys_getuid16
-	.long sys_stime		/* 25 */
-	.long sys_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime		/* 30 */
-	.long sys_ni_syscall	/* old stty syscall holder */
-	.long sys_ni_syscall	/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall	/* 35 */		/* old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir		/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall	/* old prof syscall holder */
-	.long sys_brk		/* 45 */
-	.long sys_setgid16
-	.long sys_getgid16
-	.long sys_signal
-	.long sys_geteuid16
-	.long sys_getegid16	/* 50 */
-	.long sys_acct
-	.long sys_umount		/* recycled never used phys() */
-	.long sys_ni_syscall	/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl		/* 55 */
-	.long sys_ni_syscall	/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall	/* old ulimit syscall holder */
-	.long sys_ni_syscall	/* sys_olduname */
-	.long sys_umask		/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp		/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid16	/* 70 */
-	.long sys_setregid16
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit	/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups16	/* 80 */
-	.long sys_setgroups16
-	.long sys_ni_syscall	/* sys_oldselect */
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink		/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long old_readdir
-	.long old_mmap		/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown16		/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall	/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs		/* 100 */
-	.long sys_ni_syscall	/* ioperm */
-	.long sys_socketcall
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer	/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_uname
-	.long sys_ni_syscall	/* 110 */ /* iopl */
-	.long sys_vhangup
-	.long sys_ni_syscall	/* idle */
-	.long sys_ni_syscall	/* vm86old */
-	.long sys_wait4
-	.long sys_swapoff		/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc
-	.long sys_fsync
-	.long sys_sigreturn
-	.long sys_clone		/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_ni_syscall	/* sys_modify_ldt */
-	.long sys_adjtimex
-	.long sys_mprotect		/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall	/* old "create_module" */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall	/* 130: old "get_kernel_syms" */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs		/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall	/* for afs_syscall */
-	.long sys_setfsuid16
-	.long sys_setfsgid16
-	.long sys_llseek		/* 140 */
-	.long sys_getdents
-	.long sys_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv		/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock		/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam   /* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid16
-	.long sys_getresuid16	/* 165 */
-	.long sys_ni_syscall	/* vm86 */
-	.long sys_ni_syscall	/* old "query_module" */
-	.long sys_poll
-	.long sys_nfsservctl
-	.long sys_setresgid16	/* 170 */
-	.long sys_getresgid16
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask	/* 175 */
-	.long sys_rt_sigpending
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread_wrapper	   /* 180 */
-	.long sys_pwrite_wrapper
-	.long sys_chown16
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset           /* 185 */
-	.long sys_sigaltstack
-	.long sys_sendfile
-	.long sys_ni_syscall	/* streams1 */
-	.long sys_ni_syscall	/* streams2 */
-	.long sys_vfork            /* 190 */
-	.long sys_getrlimit
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64		/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_lchown
-	.long sys_getuid
-	.long sys_getgid		/* 200 */
-	.long sys_geteuid
-	.long sys_getegid
-	.long sys_setreuid
-	.long sys_setregid
-	.long sys_getgroups	/* 205 */
-	.long sys_setgroups
-	.long sys_fchown
-	.long sys_setresuid
-	.long sys_getresuid
-	.long sys_setresgid	/* 210 */
-	.long sys_getresgid
-	.long sys_chown
-	.long sys_setuid
-	.long sys_setgid
-	.long sys_setfsuid		/* 215 */
-	.long sys_setfsgid
-	.long sys_pivot_root
-	.long sys_mincore
-	.long sys_madvise
-	.long sys_getdents64	/* 220 */
-	.long sys_fcntl64
-	.long sys_ni_syscall	/* reserved for TUX */
-	.long sys_ni_syscall	/* Reserved for Security */
-	.long sys_gettid
-	.long sys_readahead	/* 225 */
-	.long sys_setxattr
-	.long sys_lsetxattr
-	.long sys_fsetxattr
-	.long sys_getxattr
-	.long sys_lgetxattr	/* 230 */
-	.long sys_fgetxattr
-	.long sys_listxattr
-	.long sys_llistxattr
-	.long sys_flistxattr
-	.long sys_removexattr	/* 235 */
-	.long sys_lremovexattr
-	.long sys_fremovexattr
-	.long sys_tkill
-	.long sys_sendfile64
-	.long sys_futex		/* 240 */
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity
-	.long sys_ni_syscall
-	.long sys_ni_syscall
-	.long sys_io_setup	/* 245 */
-	.long sys_io_destroy
-	.long sys_io_getevents
-	.long sys_io_submit
-	.long sys_io_cancel
-	.long sys_fadvise64	/* 250 */
-	.long sys_ni_syscall
-	.long sys_exit_group
-	.long sys_lookup_dcookie
-	.long sys_epoll_create
-	.long sys_epoll_ctl	/* 255 */
-	.long sys_epoll_wait
- 	.long sys_remap_file_pages
- 	.long sys_set_tid_address
- 	.long sys_timer_create
- 	.long sys_timer_settime		/* 260 */
- 	.long sys_timer_gettime
- 	.long sys_timer_getoverrun
- 	.long sys_timer_delete
- 	.long sys_clock_settime
- 	.long sys_clock_gettime		/* 265 */
- 	.long sys_clock_getres
- 	.long sys_clock_nanosleep
-	.long sys_statfs64
-	.long sys_fstatfs64     
-	.long sys_tgkill		/* 270 */
-	.long sys_utimes
- 	.long sys_fadvise64_64_wrapper
-	.long sys_ni_syscall	/* Reserved for vserver */
-	.long sys_ni_syscall	/* Reserved for mbind */
-	.long sys_ni_syscall	/* 275 - get_mempolicy */
-	.long sys_ni_syscall	/* set_mempolicy */
-	.long sys_mq_open
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive       /* 280 */
-	.long sys_mq_notify
-	.long sys_mq_getsetattr
-	.long sys_ni_syscall	/* Reserved for kexec */
-	.long sys_waitid
-	.long sys_add_key		/* 285 */
-	.long sys_request_key
-	.long sys_keyctl
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init		/* 290 */
-	.long sys_inotify_add_watch
-	.long sys_inotify_rm_watch
-
-/* End of entry.S */
diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S
index 9b9e6ef626c..f5f53d14f24 100644
--- a/arch/sh/kernel/head.S
+++ b/arch/sh/kernel/head.S
@@ -11,6 +11,18 @@
  * Head.S contains the SH exception handlers and startup code.
  */
 #include <linux/linkage.h>
+#include <asm/thread_info.h>
+
+#ifdef CONFIG_CPU_SH4A
+#define SYNCO()		synco
+
+#define PREFI(label, reg)	\
+	mov.l	label, reg;	\
+	prefi	@reg
+#else
+#define SYNCO()
+#define PREFI(label, reg)
+#endif
 
 	.section	.empty_zero_page, "aw"
 ENTRY(empty_zero_page)
@@ -42,18 +54,25 @@ ENTRY(_stext)
 	!			Initialize global interrupt mask
 	mov	#0, r0
 	ldc	r0, r6_bank
+
+	/*
+	 * Prefetch if possible to reduce cache miss penalty.
+	 *
+	 * We do this early on for SH-4A as a micro-optimization,
+	 * as later on we will have speculative execution enabled
+	 * and this will become less of an issue.
+	 */
+	PREFI(5f, r0)
+	PREFI(6f, r0)
+
 	!
 	mov.l	2f, r0
 	mov	r0, r15		! Set initial r15 (stack pointer)
-	mov	#0x20, r1	!
-	shll8	r1		! r1 = 8192
+	mov	#(THREAD_SIZE >> 8), r1
+	shll8	r1		! r1 = THREAD_SIZE
 	sub	r1, r0		!
 	ldc	r0, r7_bank	! ... and initial thread_info
-	!
-	!			Additional CPU initialization
-	mov.l	6f, r0
-	jsr	@r0
-	 nop
+
 	!			Clear BSS area
 	mov.l	3f, r1
 	add	#4, r1
@@ -62,6 +81,14 @@ ENTRY(_stext)
 9:	cmp/hs	r2, r1
 	bf/s	9b		! while (r1 < r2)
 	 mov.l	r0,@-r2
+
+	!			Additional CPU initialization
+	mov.l	6f, r0
+	jsr	@r0
+	 nop
+
+	SYNCO()			! Wait for pending instructions..
+
 	!			Start kernel
 	mov.l	5f, r0
 	jmp	@r0
@@ -69,7 +96,7 @@ ENTRY(_stext)
 
 	.balign 4
 1:	.long	0x400080F0		! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
-2:	.long	stack
+2:	.long	init_thread_union+THREAD_SIZE
 3:	.long	__bss_start
 4:	.long	_end
 5:	.long	start_kernel
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 71c9fde2fd9..501fe03e371 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -61,6 +61,73 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
 }
 EXPORT_SYMBOL(memset_io);
 
+void __raw_readsl(unsigned long addr, void *datap, int len)
+{
+	u32 *data;
+
+	for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
+		*data++ = ctrl_inl(addr);
+
+	if (likely(len >= (0x20 >> 2))) {
+		int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+		__asm__ __volatile__(
+			"1:			\n\t"
+			"mov.l	@%7, r0		\n\t"
+			"mov.l	@%7, %2		\n\t"
+#ifdef CONFIG_CPU_SH4
+			"movca.l r0, @%0	\n\t"
+#else
+			"mov.l	r0, @%0		\n\t"
+#endif
+			"mov.l	@%7, %3		\n\t"
+			"mov.l	@%7, %4		\n\t"
+			"mov.l	@%7, %5		\n\t"
+			"mov.l	@%7, %6		\n\t"
+			"mov.l	@%7, r7		\n\t"
+			"mov.l	@%7, r0		\n\t"
+			"mov.l	%2, @(0x04,%0)	\n\t"
+			"mov	#0x20>>2, %2	\n\t"
+			"mov.l	%3, @(0x08,%0)	\n\t"
+			"sub	%2, %1		\n\t"
+			"mov.l	%4, @(0x0c,%0)	\n\t"
+			"cmp/hi	%1, %2		! T if 32 > len	\n\t"
+			"mov.l	%5, @(0x10,%0)	\n\t"
+			"mov.l	%6, @(0x14,%0)	\n\t"
+			"mov.l	r7, @(0x18,%0)	\n\t"
+			"mov.l	r0, @(0x1c,%0)	\n\t"
+			"bf.s	1b		\n\t"
+			" add	#0x20, %0	\n\t"
+			: "=&r" (data), "=&r" (len),
+			  "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+			  "=&r" (tmp5), "=&r" (tmp6)
+			: "r"(addr), "0" (data), "1" (len)
+			: "r0", "r7", "t", "memory");
+	}
+
+	for (; len != 0; len--)
+		*data++ = ctrl_inl(addr);
+}
+EXPORT_SYMBOL(__raw_readsl);
+
+void __raw_writesl(unsigned long addr, const void *data, int len)
+{
+	if (likely(len != 0)) {
+		int tmp1;
+
+		__asm__ __volatile__ (
+			"1:				\n\t"
+			"mov.l	@%0+, %1	\n\t"
+			"dt		%3		\n\t"
+			"bf.s		1b		\n\t"
+			" mov.l	%1, @%4		\n\t"
+			: "=&r" (data), "=&r" (tmp1)
+			: "0" (data), "r" (len), "r"(addr)
+			: "t", "memory");
+	}
+}
+EXPORT_SYMBOL(__raw_writesl);
+
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	return sh_mv.mv_ioport_map(port, nr);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index c2e07f7f349..c7ebd6aec95 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -1,5 +1,4 @@
-/* $Id: irq.c,v 1.20 2004/01/13 05:52:11 kkojima Exp $
- *
+/*
  * linux/arch/sh/kernel/irq.c
  *
  *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
@@ -7,13 +6,15 @@
  *
  * SuperH version:  Copyright (C) 1999  Niibe Yutaka
  */
-
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <asm/irq.h>
 #include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/thread_info.h>
 #include <asm/cpu/mmu_context.h>
 
 /*
@@ -60,15 +61,46 @@ unlock:
 }
 #endif
 
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+	struct thread_info	tinfo;
+	u32			stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS];
+static union irq_ctx *softirq_ctx[NR_CPUS];
+#endif
 
 asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 		      unsigned long r6, unsigned long r7,
 		      struct pt_regs regs)
 {
 	int irq = r4;
+#ifdef CONFIG_4KSTACKS
+	union irq_ctx *curctx, *irqctx;
+#endif
 
 	irq_enter();
 
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: is there less than 1KB free? */
+	{
+		long sp;
+
+		__asm__ __volatile__ ("and r15, %0" :
+					"=r" (sp) : "0" (THREAD_SIZE - 1));
+
+		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+			printk("do_IRQ: stack overflow: %ld\n",
+			       sp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
 #ifdef CONFIG_CPU_HAS_INTEVT
 	__asm__ __volatile__ (
 #ifdef CONFIG_CPU_HAS_SR_RB
@@ -87,7 +119,135 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 #endif
 
 	irq = irq_demux(irq);
-	__do_IRQ(irq, &regs);
+
+#ifdef CONFIG_4KSTACKS
+	curctx = (union irq_ctx *)current_thread_info();
+	irqctx = hardirq_ctx[smp_processor_id()];
+
+	/*
+	 * this is where we switch to the IRQ stack. However, if we are
+	 * already using the IRQ stack (because we interrupted a hardirq
+	 * handler) we can't do that and just have to keep using the
+	 * current stack (which is the irq stack already after all)
+	 */
+	if (curctx != irqctx) {
+		u32 *isp;
+
+		isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+		irqctx->tinfo.task = curctx->tinfo.task;
+		irqctx->tinfo.previous_sp = current_stack_pointer;
+
+		__asm__ __volatile__ (
+			"mov	%0, r4		\n"
+			"mov	%1, r5		\n"
+			"mov	r15, r9		\n"
+			"jsr	@%2		\n"
+			/* swith to the irq stack */
+			" mov	%3, r15		\n"
+			/* restore the stack (ring zero) */
+			"mov	r9, r15		\n"
+			: /* no outputs */
+			: "r" (irq), "r" (&regs), "r" (__do_IRQ), "r" (isp)
+			/* XXX: A somewhat excessive clobber list? -PFM */
+			: "memory", "r0", "r1", "r2", "r3", "r4",
+			  "r5", "r6", "r7", "r8", "t", "pr"
+		);
+	} else
+#endif
+		__do_IRQ(irq, &regs);
+
 	irq_exit();
+
 	return 1;
 }
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * These should really be __section__(".bss.page_aligned") as well, but
+ * gcc's 3.0 and earlier don't handle that correctly.
+ */
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__aligned__(THREAD_SIZE)));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+		__attribute__((__aligned__(THREAD_SIZE)));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+	union irq_ctx *irqctx;
+
+	if (hardirq_ctx[cpu])
+		return;
+
+	irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
+
+	hardirq_ctx[cpu] = irqctx;
+
+	irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
+	irqctx->tinfo.task		= NULL;
+	irqctx->tinfo.exec_domain	= NULL;
+	irqctx->tinfo.cpu		= cpu;
+	irqctx->tinfo.preempt_count	= SOFTIRQ_OFFSET;
+	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
+
+	softirq_ctx[cpu] = irqctx;
+
+	printk("CPU %u irqstacks, hard=%p soft=%p\n",
+		cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+	hardirq_ctx[cpu] = NULL;
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+	unsigned long flags;
+	struct thread_info *curctx;
+	union irq_ctx *irqctx;
+	u32 *isp;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		curctx = current_thread_info();
+		irqctx = softirq_ctx[smp_processor_id()];
+		irqctx->tinfo.task = curctx->task;
+		irqctx->tinfo.previous_sp = current_stack_pointer;
+
+		/* build the stack frame on the softirq stack */
+		isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+
+		__asm__ __volatile__ (
+			"mov	r15, r9		\n"
+			"jsr	@%0		\n"
+			/* switch to the softirq stack */
+			" mov	%1, r15		\n"
+			/* restore the thread stack */
+			"mov	r9, r15		\n"
+			: /* no outputs */
+			: "r" (__do_softirq), "r" (isp)
+			/* XXX: A somewhat excessive clobber list? -PFM */
+			: "memory", "r0", "r1", "r2", "r3", "r4",
+			  "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
+		);
+	}
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
+#endif
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index 42638b92b51..9c6315f0335 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -101,16 +101,17 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#ifdef CONFIG_SH_KGDB_CONSOLE
+#include <linux/console.h>
+#endif
+
 #include <asm/system.h>
 #include <asm/current.h>
 #include <asm/signal.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
 #include <asm/kgdb.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-#include <linux/console.h>
-#endif
+#include <asm/io.h>
 
 /* Function pointers for linkage */
 kgdb_debug_hook_t *kgdb_debug_hook;
@@ -240,7 +241,6 @@ static jmp_buf rem_com_env;
 /* Misc static */
 static int stepped_address;
 static short stepped_opcode;
-static const char hexchars[] = "0123456789abcdef";
 static char in_buffer[BUFMAX];
 static char out_buffer[OUTBUFMAX];
 
@@ -253,29 +253,6 @@ typedef unsigned char threadref[8];
 #define BUF_THREAD_ID_SIZE 16
 #endif
 
-/* Return addr as a real volatile address */
-static inline unsigned int ctrl_inl(const unsigned long addr)
-{
-	return *(volatile unsigned long *) addr;
-}
-
-/* Correctly set *addr using volatile */
-static inline void ctrl_outl(const unsigned int b, unsigned long addr)
-{
-	*(volatile unsigned long *) addr = b;
-}
-
-/* Get high hex bits */
-static char highhex(const int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Get low hex bits */
-static char lowhex(const int x)
-{
-	return hexchars[x & 0xf];
-}
 
 /* Convert ch to hex */
 static int hex(const char ch)
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 6bcd8d92399..08587cdb64d 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -29,12 +29,6 @@ extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
 extern void *gdb_vbr_vector;
 
-/*
- * Provide a dummy crash_notes definition while crash dump arrives to ppc.
- * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
- */
-void *crash_notes = NULL;
-
 void machine_shutdown(void)
 {
 }
diff --git a/arch/sh/kernel/pm.c b/arch/sh/kernel/pm.c
new file mode 100644
index 00000000000..10ab62c9aed
--- /dev/null
+++ b/arch/sh/kernel/pm.c
@@ -0,0 +1,88 @@
+/*
+ * Generic Power Management Routine
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+#include <asm/watchdog.h>
+#include <asm/pm.h>
+
+#define INTR_OFFSET	0x600
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+#define STBCR_STBY	0x80
+#define STBCR_MSTP2	0x04
+
+#define MCR		0xffffff68
+#define RTCNT		0xffffff70
+
+#define MCR_RMODE	2
+#define MCR_RFSH	4
+
+void pm_enter(void)
+{
+	u8 stbcr, csr;
+	u16 frqcr, mcr;
+	u32 vbr_new, vbr_old;
+
+	set_bl_bit();
+
+	/* set wdt */
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	csr |= WTCSR_CKS_4096;
+	sh_wdt_write_csr(csr);
+	csr = sh_wdt_read_csr();
+	sh_wdt_write_cnt(0);
+
+	/* disable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+	ctrl_outw(frqcr, FRQCR);
+
+	/* enable standby */
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+	/* set self-refresh */
+	mcr = ctrl_inw(MCR);
+	ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+	/* set interrupt handler */
+	asm volatile("stc vbr, %0" : "=r" (vbr_old));
+	vbr_new = get_zeroed_page(GFP_ATOMIC);
+	udelay(50);
+	memcpy((void*)(vbr_new + INTR_OFFSET),
+	       &wakeup_start, &wakeup_end - &wakeup_start);
+	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+	ctrl_outw(0, RTCNT);
+	ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+	cpu_sleep();
+
+	asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+	free_page(vbr_new);
+
+	/* enable PLL1 */
+	frqcr = ctrl_inw(FRQCR);
+	frqcr |= FRQCR_PSTBY;
+	ctrl_outw(frqcr, FRQCR);
+	udelay(50);
+	frqcr |= FRQCR_PLLEN;
+	ctrl_outw(frqcr, FRQCR);
+
+	ctrl_outb(stbcr, STBCR);
+
+	clear_bl_bit();
+}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index f2031314cb2..0b1d5dd7a93 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -81,16 +81,6 @@ void cpu_idle(void)
 
 void machine_restart(char * __unused)
 {
-
-#ifdef CONFIG_KEXEC
-	struct kimage *image;
-	image = xchg(&kexec_image, 0);
-	if (image) {
-		machine_shutdown();
-		machine_kexec(image);
-	}
-#endif
-
 	/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
 	asm volatile("ldc %0, sr\n\t"
 		     "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
@@ -263,6 +253,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		unsigned long unused,
 		struct task_struct *p, struct pt_regs *regs)
 {
+	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
 #if defined(CONFIG_SH_FPU)
 	struct task_struct *tsk = current;
@@ -277,8 +268,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 
 	if (user_mode(regs)) {
 		childregs->regs[15] = usp;
+		ti->addr_limit = USER_DS;
 	} else {
 		childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+		ti->addr_limit = KERNEL_DS;
 	}
         if (clone_flags & CLONE_SETTLS) {
 		childregs->gbr = childregs->regs[0];
@@ -299,13 +292,15 @@ ubc_set_tracing(int asid, unsigned long pc)
 {
 	ctrl_outl(pc, UBC_BARA);
 
+#ifdef CONFIG_MMU
 	/* We don't have any ASID settings for the SH-2! */
 	if (cpu_data->type != CPU_SH7604)
 		ctrl_outb(asid, UBC_BASRA);
+#endif
 
 	ctrl_outl(0, UBC_BAMRA);
 
-	if (cpu_data->type == CPU_SH7729) {
+	if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) {
 		ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
 		ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
 	} else {
@@ -344,6 +339,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne
 	}
 #endif
 
+#ifdef CONFIG_MMU
 	/*
 	 * Restore the kernel mode register
 	 *   	k7 (r7_bank1)
@@ -351,19 +347,21 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne
 	asm volatile("ldc	%0, r7_bank"
 		     : /* no output */
 		     : "r" (task_thread_info(next)));
+#endif
 
-#ifdef CONFIG_MMU
 	/* If no tasks are using the UBC, we're done */
 	if (ubc_usercnt == 0)
 		/* If no tasks are using the UBC, we're done */;
 	else if (next->thread.ubc_pc && next->mm) {
-		ubc_set_tracing(next->mm->context & MMU_CONTEXT_ASID_MASK,
-				next->thread.ubc_pc);
+		int asid = 0;
+#ifdef CONFIG_MMU
+		asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK;
+#endif
+		ubc_set_tracing(asid, next->thread.ubc_pc);
 	} else {
 		ctrl_outw(0, UBC_BBRA);
 		ctrl_outw(0, UBC_BBRB);
 	}
-#endif
 
 	return prev;
 }
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index f7eebbde329..04ca13a041c 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -224,7 +224,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	case PTRACE_SETDSPREGS: {
 		unsigned long dp;
-		int i;
 
 		ret = -EIO;
 		dp = ((unsigned long) child) + THREAD_SIZE -
diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c
index a3c24dcbf01..184119eeae5 100644
--- a/arch/sh/kernel/semaphore.c
+++ b/arch/sh/kernel/semaphore.c
@@ -14,7 +14,7 @@
 #include <asm/semaphore.h>
 #include <asm/semaphore-helper.h>
 
-spinlock_t semaphore_wake_lock;
+DEFINE_SPINLOCK(semaphore_wake_lock);
 
 /*
  * Semaphores are implemented using a two-way counter:
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index e75189cb1db..5f587332234 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -43,27 +43,14 @@ extern void * __rd_start, * __rd_end;
  * The bigger value means no problem.
  */
 struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+#ifdef CONFIG_VT
 struct screen_info screen_info;
+#endif
 
 #if defined(CONFIG_SH_UNKNOWN)
 struct sh_machine_vector sh_mv;
 #endif
 
-/* We need this to satisfy some external references. */
-struct screen_info screen_info = {
-        0, 25,                  /* orig-x, orig-y */
-        0,                      /* unused */
-        0,                      /* orig-video-page */
-        0,                      /* orig-video-mode */
-        80,                     /* orig-video-cols */
-        0,0,0,                  /* ega_ax, ega_bx, ega_cx */
-        25,                     /* orig-video-lines */
-        0,                      /* orig-video-isVGA */
-        16                      /* orig-video-points */
-};
-
-extern void platform_setup(void);
-extern char *get_system_type(void);
 extern int root_mountflags;
 
 #define MV_NAME_SIZE 32
@@ -90,29 +77,8 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name);
 
 static char command_line[COMMAND_LINE_SIZE] = { 0, };
 
-struct resource standard_io_resources[] = {
-	{ "dma1", 0x00, 0x1f },
-	{ "pic1", 0x20, 0x3f },
-	{ "timer", 0x40, 0x5f },
-	{ "keyboard", 0x60, 0x6f },
-	{ "dma page reg", 0x80, 0x8f },
-	{ "pic2", 0xa0, 0xbf },
-	{ "dma2", 0xc0, 0xdf },
-	{ "fpu", 0xf0, 0xff }
-};
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
-/* System RAM - interrupted by the 640kB-1M hole */
-#define code_resource (ram_resources[3])
-#define data_resource (ram_resources[4])
-static struct resource ram_resources[] = {
-	{ "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY },
-	{ "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY },
-	{ "Video RAM area", 0x0a0000, 0x0bffff },
-	{ "Kernel code", 0x100000, 0 },
-	{ "Kernel data", 0, 0 }
-};
+static struct resource code_resource = { .name = "Kernel code", };
+static struct resource data_resource = { .name = "Kernel data", };
 
 unsigned long memory_start, memory_end;
 
@@ -145,6 +111,24 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
 				memory_end = memory_start + mem_size;
 			}
 		}
+
+#ifdef CONFIG_EARLY_PRINTK
+		if (c == ' ' && !memcmp(from, "earlyprintk=", 12)) {
+			char *ep_end;
+
+			if (to != command_line)
+				to--;
+
+			from += 12;
+			ep_end = strchr(from, ' ');
+
+			setup_early_printk(from);
+			printk("early console enabled\n");
+
+			from = ep_end;
+		}
+#endif
+
 		if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
 			char* mv_end;
 			char* mv_comma;
@@ -237,6 +221,9 @@ static int __init sh_mv_setup(char **cmdline_p)
 	__set_io_port_base(mv_io_base);
 #endif
 
+	if (!sh_mv.mv_nr_irqs)
+		sh_mv.mv_nr_irqs = NR_IRQS;
+
 	return 0;
 }
 
@@ -245,11 +232,6 @@ void __init setup_arch(char **cmdline_p)
 	unsigned long bootmap_size;
 	unsigned long start_pfn, max_pfn, max_low_pfn;
 
-#ifdef CONFIG_EARLY_PRINTK
-	extern void enable_early_printk(void);
-
-	enable_early_printk();
-#endif
 #ifdef CONFIG_CMDLINE_BOOL
         strcpy(COMMAND_LINE, CONFIG_CMDLINE);
 #endif
@@ -368,14 +350,14 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	/* Perform the machine specific initialisation */
-	platform_setup();
+	if (likely(sh_mv.mv_setup))
+		sh_mv.mv_setup(cmdline_p);
 
 	paging_init();
 }
 
 struct sh_machine_vector* __init get_mv_byname(const char* name)
 {
-	extern int strcasecmp(const char *, const char *);
 	extern long __machvec_start, __machvec_end;
 	struct sh_machine_vector *all_vecs =
 		(struct sh_machine_vector *)&__machvec_start;
@@ -410,25 +392,18 @@ static int __init topology_init(void)
 subsys_initcall(topology_init);
 
 static const char *cpu_name[] = {
-	[CPU_SH7604]	= "SH7604",
-	[CPU_SH7705]	= "SH7705",
-	[CPU_SH7708]	= "SH7708",
-	[CPU_SH7729]	= "SH7729",
-	[CPU_SH7300]	= "SH7300",
-	[CPU_SH7750]	= "SH7750",
-	[CPU_SH7750S]	= "SH7750S",
-	[CPU_SH7750R]	= "SH7750R",
-	[CPU_SH7751]	= "SH7751",
-	[CPU_SH7751R]	= "SH7751R",
-	[CPU_SH7760]	= "SH7760",
-	[CPU_SH73180]	= "SH73180",
-	[CPU_ST40RA]	= "ST40RA",
-	[CPU_ST40GX1]	= "ST40GX1",
-	[CPU_SH4_202]	= "SH4-202",
-	[CPU_SH4_501]	= "SH4-501",
-	[CPU_SH7770]	= "SH7770",
-	[CPU_SH7780]	= "SH7780",
-	[CPU_SH7781]	= "SH7781",
+	[CPU_SH7604]	= "SH7604",	[CPU_SH7300]	= "SH7300",
+	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
+	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
+	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7729]	= "SH7729",	[CPU_SH7750]	= "SH7750",
+	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
+	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",
+	[CPU_SH7760]	= "SH7760",	[CPU_SH73180]	= "SH73180",
+	[CPU_ST40RA]	= "ST40RA",	[CPU_ST40GX1]	= "ST40GX1",
+	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
+	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
+	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
 	[CPU_SH_NONE]	= "Unknown"
 };
 
@@ -438,8 +413,10 @@ const char *get_cpu_subtype(void)
 }
 
 #ifdef CONFIG_PROC_FS
+/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
 static const char *cpu_flags[] = {
-	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL
+	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+	"ptea", "llsc", "l2", NULL
 };
 
 static void show_cpuflags(struct seq_file *m)
@@ -460,7 +437,8 @@ static void show_cpuflags(struct seq_file *m)
 	seq_printf(m, "\n");
 }
 
-static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info)
+static void show_cacheinfo(struct seq_file *m, const char *type,
+			   struct cache_info info)
 {
 	unsigned int cache_size;
 
@@ -493,7 +471,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	 * unified cache on the SH-2 and SH-3, as well as the harvard
 	 * style cache on the SH-4.
 	 */
-	if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) {
+	if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) {
 		seq_printf(m, "unified\n");
 		show_cacheinfo(m, "cache", boot_cpu_data.icache);
 	} else {
@@ -502,6 +480,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		show_cacheinfo(m, "dcache", boot_cpu_data.dcache);
 	}
 
+	/* Optional secondary cache */
+	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE)
+		show_cacheinfo(m, "scache", boot_cpu_data.scache);
+
 	seq_printf(m, "bogomips\t: %lu.%02lu\n",
 		     boot_cpu_data.loops_per_jiffy/(500000/HZ),
 		     (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);
@@ -617,4 +599,3 @@ static int __init kgdb_parse_options(char *options)
 }
 __setup("kgdb=", kgdb_parse_options);
 #endif /* CONFIG_SH_KGDB */
-
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 245ed8f945e..d3cbfa2ad4a 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -27,21 +27,11 @@ EXPORT_SYMBOL(sh_mv);
 
 /* platform dependent support */
 EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-EXPORT_SYMBOL(probe_irq_mask);
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(disable_irq_nosync);
 EXPORT_SYMBOL(irq_desc);
 EXPORT_SYMBOL(no_irq_type);
 
-EXPORT_SYMBOL(strstr);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
 
 /* PCI exports */
 #ifdef CONFIG_PCI
@@ -52,13 +42,8 @@ EXPORT_SYMBOL(pci_free_consistent);
 /* mem exports */
 EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memcpy_fromio);
-EXPORT_SYMBOL(memcpy_toio);
 EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memset_io);
 EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memscan);
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(boot_cpu_data);
 
@@ -94,7 +79,9 @@ EXPORT_SYMBOL(strcpy);
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
 DECLARE_EXPORT(__movstrSI12_i4);
+#endif
 
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
 /* needed by some modules */
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_cache_range);
@@ -102,11 +89,9 @@ EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(__flush_purge_region);
 #endif
 
-#if defined(CONFIG_SH7705_CACHE_32KB)
-EXPORT_SYMBOL(flush_cache_all);
-EXPORT_SYMBOL(flush_cache_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(__flush_purge_region);
+#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
+	defined(CONFIG_SH7705_CACHE_32KB))
+EXPORT_SYMBOL(clear_user_page);
 #endif
 
 EXPORT_SYMBOL(flush_tlb_page);
@@ -116,7 +101,12 @@ EXPORT_SYMBOL(__down_trylock);
 EXPORT_SYMBOL(synchronize_irq);
 #endif
 
+#ifdef CONFIG_PM
+EXPORT_SYMBOL(pm_suspend);
+#endif
+
 EXPORT_SYMBOL(csum_partial);
+#ifdef CONFIG_IPV6
 EXPORT_SYMBOL(csum_ipv6_magic);
-EXPORT_SYMBOL(consistent_sync);
+#endif
 EXPORT_SYMBOL(clear_page);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index b475c4d2405..5213f5bc6ce 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -8,7 +8,6 @@
  *  SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
  *
  */
-
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
@@ -21,6 +20,7 @@
 #include <linux/unistd.h>
 #include <linux/stddef.h>
 #include <linux/tty.h>
+#include <linux/elf.h>
 #include <linux/personality.h>
 #include <linux/binfmts.h>
 
@@ -29,12 +29,8 @@
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
 
-#define DEBUG_SIG 0
-
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -43,51 +39,17 @@ sys_sigsuspend(old_sigset_t mask,
 	       unsigned long r5, unsigned long r6, unsigned long r7,
 	       struct pt_regs regs)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	regs.regs[0] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-		  unsigned long r6, unsigned long r7,
-		  struct pt_regs regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs.regs[0] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&regs, &saveset))
-			return -EINTR;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -348,7 +310,12 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	return (void __user *)((sp - frame_size) & -8ul);
 }
 
-static void setup_frame(int sig, struct k_sigaction *ka,
+/* These symbols are defined with the addresses in the vsyscall page.
+   See vsyscall-trapa.S.  */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+static int setup_frame(int sig, struct k_sigaction *ka,
 			sigset_t *set, struct pt_regs *regs)
 {
 	struct sigframe __user *frame;
@@ -368,15 +335,18 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 
 	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
 
-	if (_NSIG_WORDS > 1) {
+	if (_NSIG_WORDS > 1)
 		err |= __copy_to_user(frame->extramask, &set->sig[1],
 				      sizeof(frame->extramask));
-	}
 
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
 		regs->pr = (unsigned long) ka->sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+	} else if (likely(current->mm->context.vdso)) {
+		regs->pr = VDSO_SYM(&__kernel_sigreturn);
+#endif
 	} else {
 		/* Generate return code (system call to sigreturn) */
 		err |= __put_user(MOVW(7), &frame->retcode[0]);
@@ -402,21 +372,22 @@ static void setup_frame(int sig, struct k_sigaction *ka,
 
 	set_fs(USER_DS);
 
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
+	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+		 current->comm, current->pid, frame, regs->pc, regs->pr);
 
 	flush_cache_sigtramp(regs->pr);
+
 	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
 		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-	return;
+
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			   sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
@@ -452,6 +423,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
 		regs->pr = (unsigned long) ka->sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+	} else if (likely(current->mm->context.vdso)) {
+		regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
+#endif
 	} else {
 		/* Generate return code (system call to rt_sigreturn) */
 		err |= __put_user(MOVW(7), &frame->retcode[0]);
@@ -477,28 +452,31 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	set_fs(USER_DS);
 
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
+	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+		 current->comm, current->pid, frame, regs->pc, regs->pr);
 
 	flush_cache_sigtramp(regs->pr);
+
 	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
 		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-	return;
+
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
 /*
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
+	int ret;
+
 	/* Are we from a system call? */
 	if (regs->tra >= 0) {
 		/* If so, check system call restarting.. */
@@ -539,19 +517,23 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up the stack frame */
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
+		ret = setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		setup_frame(sig, ka, oldset, regs);
+		ret = setup_frame(sig, ka, oldset, regs);
 
 	if (ka->sa.sa_flags & SA_ONESHOT)
 		ka->sa.sa_handler = SIG_DFL;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	if (ret == 0) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+		if (!(ka->sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked,sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	return ret;
 }
 
 /*
@@ -563,11 +545,12 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 {
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
+	sigset_t *oldset;
 
 	/*
 	 * We want the common case to go fast, which
@@ -576,19 +559,27 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 1;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
 
-	if (!oldset)
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &ka, &info, oldset, regs);
-		return 1;
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 	}
 
  no_signal:
@@ -597,10 +588,27 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 		/* Restart the system call - no handlers present */
 		if (regs->regs[0] == -ERESTARTNOHAND ||
 		    regs->regs[0] == -ERESTARTSYS ||
-		    regs->regs[0] == -ERESTARTNOINTR ||
-		    regs->regs[0] == -ERESTART_RESTARTBLOCK) {
+		    regs->regs[0] == -ERESTARTNOINTR) {
+		    	regs->regs[0] = save_r0;
+			regs->pc -= 2;
+		} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
 			regs->pc -= 2;
+			regs->regs[3] = __NR_restart_syscall;
 		}
 	}
-	return 0;
+
+	/* if there's no signal to deliver, we just put the saved sigmask
+	 * back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
+				 __u32 thread_info_flags)
+{
+	/* deal with pending signal delivery */
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, save_r0);
 }
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 917b2f32f26..b68ff705f06 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -21,7 +21,8 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-
+#include <linux/module.h>
+#include <asm/cacheflush.h>
 #include <asm/uaccess.h>
 #include <asm/ipc.h>
 
@@ -44,11 +45,16 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	return error;
 }
 
-#if defined(HAVE_ARCH_UNMAPPED_AREA)
+unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
+
+EXPORT_SYMBOL(shm_align_mask);
+
 /*
- * To avoid cache alias, we map the shard page with same color.
+ * To avoid cache aliases, we map the shared page with same color.
  */
-#define COLOUR_ALIGN(addr)	(((addr)+SHMLBA-1)&~(SHMLBA-1))
+#define COLOUR_ALIGN(addr, pgoff)				\
+	((((addr) + shm_align_mask) & ~shm_align_mask) +	\
+	 (((pgoff) << PAGE_SHIFT) & shm_align_mask))
 
 unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -56,43 +62,52 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
+	int do_colour_align;
 
 	if (flags & MAP_FIXED) {
 		/* We do not accept a shared mapping if it would violate
 		 * cache aliasing constraints.
 		 */
-		if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1)))
+		if ((flags & MAP_SHARED) && (addr & shm_align_mask))
 			return -EINVAL;
 		return addr;
 	}
 
-	if (len > TASK_SIZE)
+	if (unlikely(len > TASK_SIZE))
 		return -ENOMEM;
 
+	do_colour_align = 0;
+	if (filp || (flags & MAP_SHARED))
+		do_colour_align = 1;
+
 	if (addr) {
-		if (flags & MAP_PRIVATE)
-			addr = PAGE_ALIGN(addr);
+		if (do_colour_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
 		else
-			addr = COLOUR_ALIGN(addr);
+			addr = PAGE_ALIGN(addr);
+
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
 			return addr;
 	}
-	if (len <= mm->cached_hole_size) {
+
+	if (len > mm->cached_hole_size) {
+		start_addr = addr = mm->free_area_cache;
+	} else {
 	        mm->cached_hole_size = 0;
-		mm->free_area_cache = TASK_UNMAPPED_BASE;
+		start_addr = addr = TASK_UNMAPPED_BASE;
 	}
-	if (flags & MAP_PRIVATE)
-		addr = PAGE_ALIGN(mm->free_area_cache);
-	else
-		addr = COLOUR_ALIGN(mm->free_area_cache);
-	start_addr = addr;
 
 full_search:
+	if (do_colour_align)
+		addr = COLOUR_ALIGN(addr, pgoff);
+	else
+		addr = PAGE_ALIGN(mm->free_area_cache);
+
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (TASK_SIZE - len < addr) {
+		if (unlikely(TASK_SIZE - len < addr)) {
 			/*
 			 * Start a new search - just in case we missed
 			 * some holes.
@@ -104,7 +119,7 @@ full_search:
 			}
 			return -ENOMEM;
 		}
-		if (!vma || addr + len <= vma->vm_start) {
+		if (likely(!vma || addr + len <= vma->vm_start)) {
 			/*
 			 * Remember the place where we stopped the search:
 			 */
@@ -115,11 +130,10 @@ full_search:
 		        mm->cached_hole_size = vma->vm_start - addr;
 
 		addr = vma->vm_end;
-		if (!(flags & MAP_PRIVATE))
-			addr = COLOUR_ALIGN(addr);
+		if (do_colour_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
 	}
 }
-#endif
 
 static inline long
 do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, 
diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S
new file mode 100644
index 00000000000..768334e9507
--- /dev/null
+++ b/arch/sh/kernel/syscalls.S
@@ -0,0 +1,353 @@
+/*
+ * arch/sh/kernel/syscalls.S
+ *
+ * System call table for SuperH
+ *
+ *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ *  Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
+#define sys_nfsservctl		sys_ni_syscall
+#endif
+
+#if !defined(CONFIG_MMU)
+#define sys_madvise		sys_ni_syscall
+#define sys_readahead		sys_ni_syscall
+#define sys_mprotect		sys_ni_syscall
+#define sys_msync		sys_ni_syscall
+#define sys_mlock		sys_ni_syscall
+#define sys_munlock		sys_ni_syscall
+#define sys_mlockall		sys_ni_syscall
+#define sys_munlockall		sys_ni_syscall
+#define sys_mremap		sys_ni_syscall
+#define sys_mincore		sys_ni_syscall
+#define sys_remap_file_pages	sys_ni_syscall
+#endif
+
+	.data
+ENTRY(sys_call_table)
+	.long sys_restart_syscall	/* 0  -  old "setup()" system call*/
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink		/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid		/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35 */		/* old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount		/* recycled never used phys() */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* sys_olduname */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp		/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_ni_syscall	/* sys_oldselect */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink		/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long old_readdir
+	.long old_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16		/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs		/* 100 */
+	.long sys_ni_syscall	/* ioperm */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_uname
+	.long sys_ni_syscall	/* 110 */ /* iopl */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* idle */
+	.long sys_ni_syscall	/* vm86old */
+	.long sys_wait4
+	.long sys_swapoff		/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect		/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130: old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek		/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam   /* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min  /* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* vm86 */
+	.long sys_ni_syscall	/* old "query_module" */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread_wrapper	   /* 180 */
+	.long sys_pwrite_wrapper
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset           /* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* streams1 */
+	.long sys_ni_syscall	/* streams2 */
+	.long sys_vfork            /* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64		/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid		/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid		/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall	/* Reserved for Security */
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall
+	.long sys_ni_syscall
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+ 	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill		/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64_wrapper
+	.long sys_ni_syscall	/* Reserved for vserver */
+	.long sys_ni_syscall	/* Reserved for mbind */
+	.long sys_ni_syscall	/* 275 - get_mempolicy */
+	.long sys_ni_syscall	/* set_mempolicy */
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive       /* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_kexec_load
+	.long sys_waitid
+	.long sys_ni_syscall		/* 285 */
+	.long sys_add_key
+	.long sys_request_key
+	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get		/* 290 */
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index a1589f85499..149d9713edd 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -3,13 +3,12 @@
  *
  *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
  *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002, 2003, 2004, 2005  Paul Mundt
+ *  Copyright (C) 2002 - 2006  Paul Mundt
  *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
  *
  *  Some code taken from i386 version.
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
  */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -26,15 +25,20 @@ struct sys_timer *sys_timer;
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
-/* XXX: Can we initialize this in a routine somewhere?  Dreamcast doesn't want
- * these routines anywhere... */
-#ifdef CONFIG_SH_RTC
-void (*rtc_get_time)(struct timespec *) = sh_rtc_gettimeofday;
-int (*rtc_set_time)(const time_t) = sh_rtc_settimeofday;
-#else
-void (*rtc_get_time)(struct timespec *);
-int (*rtc_set_time)(const time_t);
-#endif
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+	tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+	return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 
 /*
  * Scheduler clock - returns current time in nanosec units.
@@ -70,7 +74,6 @@ void do_gettimeofday(struct timeval *tv)
 	tv->tv_sec = sec;
 	tv->tv_usec = usec;
 }
-
 EXPORT_SYMBOL(do_gettimeofday);
 
 int do_settimeofday(struct timespec *tv)
@@ -103,7 +106,6 @@ int do_settimeofday(struct timespec *tv)
 
 	return 0;
 }
-
 EXPORT_SYMBOL(do_settimeofday);
 
 /* last time the RTC clock got updated */
@@ -135,7 +137,7 @@ void handle_timer_tick(struct pt_regs *regs)
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
 	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_set_time(xtime.tv_sec) == 0)
+		if (rtc_sh_set_time(xtime.tv_sec) == 0)
 			last_rtc_update = xtime.tv_sec;
 		else
 			/* do it again in 60s */
@@ -143,8 +145,33 @@ void handle_timer_tick(struct pt_regs *regs)
 	}
 }
 
+#ifdef CONFIG_PM
+int timer_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+	sys_timer->ops->stop();
+
+	return 0;
+}
+
+int timer_resume(struct sys_device *dev)
+{
+	struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+	sys_timer->ops->start();
+
+	return 0;
+}
+#else
+#define timer_suspend NULL
+#define timer_resume NULL
+#endif
+
 static struct sysdev_class timer_sysclass = {
 	set_kset_name("timer"),
+	.suspend = timer_suspend,
+	.resume	 = timer_resume,
 };
 
 static int __init timer_init_sysfs(void)
@@ -156,7 +183,6 @@ static int __init timer_init_sysfs(void)
 	sys_timer->dev.cls = &timer_sysclass;
 	return sysdev_register(&sys_timer->dev);
 }
-
 device_initcall(timer_init_sysfs);
 
 void (*board_time_init)(void);
@@ -168,15 +194,9 @@ void __init time_init(void)
 
 	clk_init();
 
-	if (rtc_get_time) {
-		rtc_get_time(&xtime);
-	} else {
-		xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0);
-		xtime.tv_nsec = 0;
-	}
-
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
+	rtc_sh_get_time(&xtime);
+	set_normalized_timespec(&wall_to_monotonic,
+				-xtime.tv_sec, -xtime.tv_nsec);
 
 	/*
 	 * Find the timer to use as the system timer, it will be
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index d4212add53b..205816fcf0d 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -132,17 +132,17 @@ static unsigned long tmu_timer_get_frequency(void)
 	ctrl_outl(0xffffffff, TMU0_TCOR);
 	ctrl_outl(0xffffffff, TMU0_TCNT);
 
-	rtc_get_time(&ts2);
+	rtc_sh_get_time(&ts2);
 
 	do {
-		rtc_get_time(&ts1);
+		rtc_sh_get_time(&ts1);
 	} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
 
 	/* actually start the timer */
 	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
 
 	do {
-		rtc_get_time(&ts2);
+		rtc_sh_get_time(&ts2);
 	} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
 
 	freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
@@ -188,6 +188,18 @@ static struct clk tmu0_clk = {
 	.ops		= &tmu_clk_ops,
 };
 
+static int tmu_timer_start(void)
+{
+	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+	return 0;
+}
+
+static int tmu_timer_stop(void)
+{
+	ctrl_outb(0, TMU_TSTR);
+	return 0;
+}
+
 static int tmu_timer_init(void)
 {
 	unsigned long interval;
@@ -197,7 +209,7 @@ static int tmu_timer_init(void)
 	tmu0_clk.parent = clk_get("module_clk");
 
 	/* Start TMU0 */
-	ctrl_outb(0, TMU_TSTR);
+	tmu_timer_stop();
 #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 #endif
@@ -211,13 +223,15 @@ static int tmu_timer_init(void)
 	ctrl_outl(interval, TMU0_TCOR);
 	ctrl_outl(interval, TMU0_TCNT);
 
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+	tmu_timer_start();
 
 	return 0;
 }
 
 struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
+	.start		= tmu_timer_start,
+	.stop		= tmu_timer_stop,
 	.get_frequency	= tmu_timer_get_frequency,
 	.get_offset	= tmu_timer_get_offset,
 };
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index d9db1180f77..c2c597e0948 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -36,40 +36,15 @@
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
-#define CHK_REMOTE_DEBUG(regs)                                               \
-{                                                                            \
-  if ((kgdb_debug_hook != (kgdb_debug_hook_t *) NULL) && (!user_mode(regs))) \
-  {                                                                          \
-    (*kgdb_debug_hook)(regs);                                                \
-  }                                                                          \
+#define CHK_REMOTE_DEBUG(regs)                 	\
+{       					\
+	if (kgdb_debug_hook && !user_mode(regs))\
+		(*kgdb_debug_hook)(regs);       \
 }
 #else
 #define CHK_REMOTE_DEBUG(regs)
 #endif
 
-#define DO_ERROR(trapnr, signr, str, name, tsk)				\
-asmlinkage void do_##name(unsigned long r4, unsigned long r5,		\
-			  unsigned long r6, unsigned long r7,		\
-			  struct pt_regs regs)				\
-{									\
-	unsigned long error_code;					\
- 									\
-	/* Check if it's a DSP instruction */				\
- 	if (is_dsp_inst(&regs)) {					\
-		/* Enable DSP mode, and restart instruction. */		\
-		regs.sr |= SR_DSP;					\
-		return;							\
-	}								\
-									\
-	asm volatile("stc	r2_bank, %0": "=r" (error_code));	\
-	local_irq_enable();						\
-	tsk->thread.error_code = error_code;				\
-	tsk->thread.trap_no = trapnr;					\
-        CHK_REMOTE_DEBUG(&regs);					\
-	force_sig(signr, tsk);						\
-	die_if_no_fixup(str,&regs,error_code);				\
-}
-
 #ifdef CONFIG_CPU_SH2
 #define TRAP_RESERVED_INST	4
 #define TRAP_ILLEGAL_SLOT_INST	6
@@ -86,7 +61,7 @@ asmlinkage void do_##name(unsigned long r4, unsigned long r5,		\
 #define VMALLOC_OFFSET (8*1024*1024)
 #define MODULE_RANGE (8*1024*1024)
 
-spinlock_t die_lock;
+DEFINE_SPINLOCK(die_lock);
 
 void die(const char * str, struct pt_regs * regs, long err)
 {
@@ -575,8 +550,117 @@ int is_dsp_inst(struct pt_regs *regs)
 #define is_dsp_inst(regs)	(0)
 #endif /* CONFIG_SH_DSP */
 
-DO_ERROR(TRAP_RESERVED_INST, SIGILL, "reserved instruction", reserved_inst, current)
-DO_ERROR(TRAP_ILLEGAL_SLOT_INST, SIGILL, "illegal slot instruction", illegal_slot_inst, current)
+extern int do_fpu_inst(unsigned short, struct pt_regs*);
+
+asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs regs)
+{
+	unsigned long error_code;
+	struct task_struct *tsk = current;
+
+#ifdef CONFIG_SH_FPU_EMU
+	unsigned short inst;
+	int err;
+
+	get_user(inst, (unsigned short*)regs.pc);
+
+	err = do_fpu_inst(inst, &regs);
+	if (!err) {
+		regs.pc += 2;
+		return;
+	}
+	/* not a FPU inst. */
+#endif
+
+#ifdef CONFIG_SH_DSP
+	/* Check if it's a DSP instruction */
+ 	if (is_dsp_inst(&regs)) {
+		/* Enable DSP mode, and restart instruction. */
+		regs.sr |= SR_DSP;
+		return;
+	}
+#endif
+
+	asm volatile("stc	r2_bank, %0": "=r" (error_code));
+	local_irq_enable();
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = TRAP_RESERVED_INST;
+	CHK_REMOTE_DEBUG(&regs);
+	force_sig(SIGILL, tsk);
+	die_if_no_fixup("reserved instruction", &regs, error_code);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+static int emulate_branch(unsigned short inst, struct pt_regs* regs)
+{
+	/*
+	 * bfs: 8fxx: PC+=d*2+4;
+	 * bts: 8dxx: PC+=d*2+4;
+	 * bra: axxx: PC+=D*2+4;
+	 * bsr: bxxx: PC+=D*2+4  after PR=PC+4;
+	 * braf:0x23: PC+=Rn*2+4;
+	 * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
+	 * jmp: 4x2b: PC=Rn;
+	 * jsr: 4x0b: PC=Rn      after PR=PC+4;
+	 * rts: 000b: PC=PR;
+	 */
+	if ((inst & 0xfd00) == 0x8d00) {
+		regs->pc += SH_PC_8BIT_OFFSET(inst);
+		return 0;
+	}
+
+	if ((inst & 0xe000) == 0xa000) {
+		regs->pc += SH_PC_12BIT_OFFSET(inst);
+		return 0;
+	}
+
+	if ((inst & 0xf0df) == 0x0003) {
+		regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
+		return 0;
+	}
+
+	if ((inst & 0xf0df) == 0x400b) {
+		regs->pc = regs->regs[(inst & 0x0f00) >> 8];
+		return 0;
+	}
+
+	if ((inst & 0xffff) == 0x000b) {
+		regs->pc = regs->pr;
+		return 0;
+	}
+
+	return 1;
+}
+#endif
+
+asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
+				unsigned long r6, unsigned long r7,
+				struct pt_regs regs)
+{
+	unsigned long error_code;
+	struct task_struct *tsk = current;
+#ifdef CONFIG_SH_FPU_EMU
+	unsigned short inst;
+
+	get_user(inst, (unsigned short *)regs.pc + 1);
+	if (!do_fpu_inst(inst, &regs)) {
+		get_user(inst, (unsigned short *)regs.pc);
+		if (!emulate_branch(inst, &regs))
+			return;
+		/* fault in branch.*/
+	}
+	/* not a FPU inst. */
+#endif
+
+	asm volatile("stc	r2_bank, %0": "=r" (error_code));
+	local_irq_enable();
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = TRAP_RESERVED_INST;
+	CHK_REMOTE_DEBUG(&regs);
+	force_sig(SIGILL, tsk);
+	die_if_no_fixup("illegal slot instruction", &regs, error_code);
+}
 
 asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
 				   unsigned long r6, unsigned long r7,
@@ -634,14 +718,16 @@ void __init trap_init(void)
 	exception_handling_table[TRAP_ILLEGAL_SLOT_INST]
 		= (void *)do_illegal_slot_inst;
 
-#ifdef CONFIG_CPU_SH4
-	if (!(cpu_data->flags & CPU_HAS_FPU)) {
-		/* For SH-4 lacking an FPU, treat floating point instructions
-		   as reserved. */
-		/* entry 64 corresponds to EXPEVT=0x800 */
-		exception_handling_table[64] = (void *)do_reserved_inst;
-		exception_handling_table[65] = (void *)do_illegal_slot_inst;
-	}
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
+    defined(CONFIG_SH_FPU_EMU)
+	/*
+	 * For SH-4 lacking an FPU, treat floating point instructions as
+	 * reserved. They'll be handled in the math-emu case, or faulted on
+	 * otherwise.
+	 */
+	/* entry 64 corresponds to EXPEVT=0x800 */
+	exception_handling_table[64] = (void *)do_reserved_inst;
+	exception_handling_table[65] = (void *)do_illegal_slot_inst;
 #endif
 		
 	/* Setup VBR for boot cpu */
@@ -655,20 +741,12 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 	unsigned long module_end = VMALLOC_END;
 	int i = 1;
 
-	if (tsk && !sp) {
+	if (!tsk)
+		tsk = current;
+	if (tsk == current)
+		sp = (unsigned long *)current_stack_pointer;
+	else
 		sp = (unsigned long *)tsk->thread.sp;
-	}
-
-	if (!sp) {
-		__asm__ __volatile__ (
-			"mov r15, %0\n\t"
-			"stc r7_bank, %1\n\t"
-			: "=r" (module_start),
-			  "=r" (module_end)
-		);
-		
-		sp = (unsigned long *)module_start;
-	}
 
 	stack = sp;
 
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 95fdd9135fc..5eb93091818 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -2,6 +2,7 @@
  * ld script to make SuperH Linux kernel
  * Written by Niibe Yutaka
  */
+#include <asm/thread_info.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
@@ -13,7 +14,7 @@ OUTPUT_ARCH(sh)
 ENTRY(_start)
 SECTIONS
 {
-  . = 0x80000000 + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+  . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
   _text = .;			/* Text and read-only data */
   text = .;			/* Text and read-only data */
   .empty_zero_page : {
@@ -40,16 +41,16 @@ SECTIONS
 	*(.data)
 
  	 /* Align the initial ramdisk image (INITRD) on page boundaries. */
- 	 . = ALIGN(4096);
+ 	 . = ALIGN(PAGE_SIZE);
  	 __rd_start = .;
  	 *(.initrd)
- 	 . = ALIGN(4096);
+ 	 . = ALIGN(PAGE_SIZE);
  	 __rd_end = .;
 
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.idt) }
 
   . = ALIGN(32);
@@ -60,12 +61,10 @@ SECTIONS
 
   _edata = .;			/* End of data section */
 
-  . = ALIGN(8192);		/* init_task */
+  . = ALIGN(THREAD_SIZE);		/* init_task */
   .data.init_task : { *(.data.init_task) }
-  /* stack */
-  .stack : { stack = .;  _stack = .; }
 
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   _sinittext = .;
   .init.text : { *(.init.text) }
@@ -96,7 +95,7 @@ SECTIONS
   __machvec_start = .;
   .init.machvec : { *(.init.machvec) }
   __machvec_end = .;
-  . = ALIGN(4096);
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
   . = ALIGN(4);
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
new file mode 100644
index 00000000000..4bbce1cfa35
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/Makefile
@@ -0,0 +1,36 @@
+obj-y += vsyscall.o vsyscall-syscall.o
+
+$(obj)/vsyscall-syscall.o: \
+	$(foreach F,trapa,$(obj)/vsyscall-$F.so)
+
+# Teach kbuild about targets
+targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-note.o vsyscall.lds
+
+# The DSO images are built using a special linker script
+quiet_cmd_syscall = SYSCALL $@
+      cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
+			   -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall.lds += -P -C -Ush
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+
+SYSCFLAGS_vsyscall-trapa.so	= $(vsyscall-flags)
+
+$(obj)/vsyscall-trapa.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+	$(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
+			$(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
+	$(call if_changed,syscall)
diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S
new file mode 100644
index 00000000000..d4b5be4f3d5
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-note.S
@@ -0,0 +1,25 @@
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+
+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
+	.section name, flags;						      \
+	.balign 4;							      \
+	.long 1f - 0f;		/* name length */			      \
+	.long 3f - 2f;		/* data length */			      \
+	.long type;		/* note type */				      \
+0:	.asciz vendor;		/* vendor name */			      \
+1:	.balign 4;							      \
+2:
+
+#define ASM_ELF_NOTE_END						      \
+3:	.balign 4;		/* pad out section */			      \
+	.previous
+
+	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+	.long LINUX_VERSION_CODE
+	ASM_ELF_NOTE_END
diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
new file mode 100644
index 00000000000..555a64f124c
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
@@ -0,0 +1,39 @@
+#include <asm/unistd.h>
+
+	.text
+	.balign 32
+	.globl __kernel_sigreturn
+	.type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+	mov.w	1f, r3
+	trapa	#0x10
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+
+1:	.short	__NR_sigreturn
+.LEND_sigreturn:
+	.size __kernel_sigreturn,.-.LSTART_sigreturn
+
+	.balign 32
+	.globl __kernel_rt_sigreturn
+	.type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+	mov.w	1f, r3
+	trapa	#0x10
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+	or	r0, r0
+
+1:	.short	__NR_rt_sigreturn
+.LEND_rt_sigreturn:
+	.size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+
+	.section .eh_frame,"a",@progbits
+	.previous
diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
new file mode 100644
index 00000000000..c2ac7f0282b
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
@@ -0,0 +1,10 @@
+#include <linux/init.h>
+
+__INITDATA
+
+	.globl vsyscall_trapa_start, vsyscall_trapa_end
+vsyscall_trapa_start:
+	.incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
+vsyscall_trapa_end:
+
+__FINIT
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
new file mode 100644
index 00000000000..3b6eb34c43f
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -0,0 +1,42 @@
+	.text
+	.globl __kernel_vsyscall
+	.type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+	/* XXX: We'll have to do something here once we opt to use the vDSO
+	 * page for something other than the signal trampoline.. as well as
+	 * fill out .eh_frame -- PFM. */
+.LEND_vsyscall:
+	.size __kernel_vsyscall,.-.LSTART_vsyscall
+	.previous
+
+	.section .eh_frame,"a",@progbits
+.LCIE:
+	.ualong	.LCIE_end - .LCIE_start
+.LCIE_start:
+	.ualong	0		/* CIE ID */
+	.byte	0x1		/* Version number */
+	.string	"zRS"		/* NUL-terminated augmentation string */
+	.uleb128 0x1		/* Code alignment factor */
+	.sleb128 -4		/* Data alignment factor */
+	.byte	0x11		/* Return address register column */
+				/* Augmentation length and data (none) */
+	.byte	0xc		/* DW_CFA_def_cfa */
+	.uleb128 0xf		/* r15 */
+	.uleb128 0x0		/* offset 0 */
+
+	.align 2
+.LCIE_end:
+
+	.ualong	.LFDE_end-.LFDE_start	/* Length FDE */
+.LFDE_start:
+	.ualong	.LCIE			/* CIE pointer */
+	.ualong	.LSTART_vsyscall-.	/* start address */
+	.ualong	.LEND_vsyscall-.LSTART_vsyscall
+	.uleb128 0
+	.align 2
+.LFDE_end:
+	.previous
+
+/* Get the common code for the sigreturn entry points */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
new file mode 100644
index 00000000000..075d6cc1a2d
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall.c
@@ -0,0 +1,150 @@
+/*
+ * arch/sh/kernel/vsyscall.c
+ *
+ *  Copyright (C) 2006 Paul Mundt
+ *
+ * vDSO randomization
+ * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/elf.h>
+
+/*
+ * Should the kernel map a VDSO page into processes and pass its
+ * address down to glibc upon exec()?
+ */
+unsigned int __read_mostly vdso_enabled = 1;
+EXPORT_SYMBOL_GPL(vdso_enabled);
+
+static int __init vdso_setup(char *s)
+{
+	vdso_enabled = simple_strtoul(s, NULL, 0);
+	return 1;
+}
+__setup("vdso=", vdso_setup);
+
+/*
+ * These symbols are defined by vsyscall.o to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vsyscall_trapa_start, vsyscall_trapa_end;
+static void *syscall_page;
+
+int __init vsyscall_init(void)
+{
+	syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
+
+	/*
+	 * XXX: Map this page to a fixmap entry if we get around
+	 * to adding the page to ELF core dumps
+	 */
+
+	memcpy(syscall_page,
+	       &vsyscall_trapa_start,
+	       &vsyscall_trapa_end - &vsyscall_trapa_start);
+
+	return 0;
+}
+
+static struct page *syscall_vma_nopage(struct vm_area_struct *vma,
+				       unsigned long address, int *type)
+{
+	unsigned long offset = address - vma->vm_start;
+	struct page *page;
+
+	if (address < vma->vm_start || address > vma->vm_end)
+		return NOPAGE_SIGBUS;
+
+	page = virt_to_page(syscall_page + offset);
+
+	get_page(page);
+
+	return page;
+}
+
+/* Prevent VMA merging */
+static void syscall_vma_close(struct vm_area_struct *vma)
+{
+}
+
+static struct vm_operations_struct syscall_vm_ops = {
+	.nopage	= syscall_vma_nopage,
+	.close	= syscall_vma_close,
+};
+
+/* Setup a VMA at program startup for the vsyscall page */
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int executable_stack)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	unsigned long addr;
+	int ret;
+
+	down_write(&mm->mmap_sem);
+	addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	vma = kmem_cache_zalloc(vm_area_cachep, SLAB_KERNEL);
+	if (!vma) {
+		ret = -ENOMEM;
+		goto up_fail;
+	}
+
+	vma->vm_start = addr;
+	vma->vm_end = addr + PAGE_SIZE;
+	/* MAYWRITE to allow gdb to COW and set breakpoints */
+	vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
+	vma->vm_flags |= mm->def_flags;
+	vma->vm_page_prot = protection_map[vma->vm_flags & 7];
+	vma->vm_ops = &syscall_vm_ops;
+	vma->vm_mm = mm;
+
+	ret = insert_vm_struct(mm, vma);
+	if (unlikely(ret)) {
+		kmem_cache_free(vm_area_cachep, vma);
+		goto up_fail;
+	}
+
+	current->mm->context.vdso = (void *)addr;
+
+	mm->total_vm++;
+up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+		return "[vdso]";
+
+	return NULL;
+}
+
+struct vm_area_struct *get_gate_vma(struct task_struct *task)
+{
+	return NULL;
+}
+
+int in_gate_area(struct task_struct *task, unsigned long address)
+{
+	return 0;
+}
+
+int in_gate_area_no_task(unsigned long address)
+{
+	return 0;
+}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
new file mode 100644
index 00000000000..b13c3d439fe
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall.lds.S
@@ -0,0 +1,74 @@
+/*
+ * Linker script for vsyscall DSO.  The vsyscall page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page).  This script controls its layout.
+ */
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+#else
+OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
+#endif
+OUTPUT_ARCH(sh)
+
+/* The ELF entry point can be used to set the AT_SYSINFO value.  */
+ENTRY(__kernel_vsyscall);
+
+SECTIONS
+{
+  . = SIZEOF_HEADERS;
+
+  .hash           : { *(.hash) }		:text
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+
+  /* This linker script is used both with -r and with -shared.
+     For the layouts to match, we need to skip more than enough
+     space for the dynamic symbol table et al.  If this amount
+     is insufficient, ld -shared will barf.  Just increase it here.  */
+  . = 0x400;
+
+  .text           : { *(.text) }		:text =0x90909090
+  .note		  : { *(.note.*) }		:text :note
+  .eh_frame_hdr   : { *(.eh_frame_hdr) }	:text :eh_frame_hdr
+  .eh_frame       : { KEEP (*(.eh_frame)) }	:text
+  .dynamic        : { *(.dynamic) }		:text :dynamic
+  .useless        : {
+  	*(.got.plt) *(.got)
+	*(.data .data.* .gnu.linkonce.d.*)
+	*(.dynbss)
+	*(.bss .bss.* .gnu.linkonce.b.*)
+  }						:text
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+  text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+  dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+  note PT_NOTE FLAGS(4); /* PF_R */
+  eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+  LINUX_2.6 {
+    global:
+    	__kernel_vsyscall;
+    	__kernel_sigreturn;
+    	__kernel_rt_sigreturn;
+
+    local: *;
+  };
+}
diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S
index 7c50dfe68c0..cbdd0d40e54 100644
--- a/arch/sh/lib/checksum.S
+++ b/arch/sh/lib/checksum.S
@@ -202,8 +202,9 @@ ENTRY(csum_partial_copy_generic)
 	cmp/pz	r6		! Jump if we had at least two bytes.
 	bt/s	1f
 	 clrt
+	add	#2,r6		! r6 was < 2.	Deal with it.
 	bra	4f
-	 add	#2,r6		! r6 was < 2.	Deal with it.
+	 mov	r6,r2
 
 3:	! Handle different src and dest alignments.
 	! This is not common, so simple byte by byte copy will do.
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
index db6b736537a..560bc17eebd 100644
--- a/arch/sh/lib/memcpy-sh4.S
+++ b/arch/sh/lib/memcpy-sh4.S
@@ -727,8 +727,8 @@ ENTRY(memcpy)
 	mov.l	@(0x04,r5), r11	!  18 LS (latency=2)
 	xtrct	r9, r8		!  48 EX
 
-	mov.w	@(0x02,r5), r12	!  18 LS (latency=2)
-	xtrct	r10, r9		!  48 EX
+	mov.l   @(0x00,r5), r12 !  18 LS (latency=2)
+    	xtrct	r10, r9		!  48 EX
 
 	movca.l	r0,@r1		!  40 LS (latency=3-7)
 	add	#-0x1c, r1	!  50 EX
diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S
index 95670090680..af91fe2b72a 100644
--- a/arch/sh/lib/memset.S
+++ b/arch/sh/lib/memset.S
@@ -29,6 +29,7 @@ ENTRY(memset)
 	bf/s	1b
 	 mov.b	r5,@-r4
 2:				! make VVVV
+	extu.b	r5,r5
 	swap.b	r5,r0		!   V0
 	or	r0,r5		!   VV
 	swap.w	r5,r0		! VV00
diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile
new file mode 100644
index 00000000000..638b342c781
--- /dev/null
+++ b/arch/sh/math-emu/Makefile
@@ -0,0 +1 @@
+obj-y	:= math.o
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
new file mode 100644
index 00000000000..26b6046814f
--- /dev/null
+++ b/arch/sh/math-emu/math.c
@@ -0,0 +1,624 @@
+/*
+ * arch/sh/math-emu/math.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "sfp-util.h"
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+#include <math-emu/double.h>
+
+#define	FPUL		(fregs->fpul)
+#define FPSCR		(fregs->fpscr)
+#define FPSCR_RM	(FPSCR&3)
+#define FPSCR_DN	((FPSCR>>18)&1)
+#define FPSCR_PR	((FPSCR>>19)&1)
+#define FPSCR_SZ	((FPSCR>>20)&1)
+#define FPSCR_FR	((FPSCR>>21)&1)
+#define FPSCR_MASK	0x003fffffUL
+
+#define BANK(n)	(n^(FPSCR_FR?16:0))
+#define FR	((unsigned long*)(fregs->fp_regs))
+#define FR0	(FR[BANK(0)])
+#define FRn	(FR[BANK(n)])
+#define FRm	(FR[BANK(m)])
+#define DR	((unsigned long long*)(fregs->fp_regs))
+#define DRn	(DR[BANK(n)/2])
+#define DRm	(DR[BANK(m)/2])
+
+#define XREG(n)	(n^16)
+#define XFn	(FR[BANK(XREG(n))])
+#define XFm	(FR[BANK(XREG(m))])
+#define XDn	(DR[BANK(XREG(n))/2])
+#define XDm	(DR[BANK(XREG(m))/2])
+
+#define R0	(regs->regs[0])
+#define Rn	(regs->regs[n])
+#define Rm	(regs->regs[m])
+
+#define WRITE(d,a)	({if(put_user(d, (typeof (d)*)a)) return -EFAULT;})
+#define READ(d,a)	({if(get_user(d, (typeof (d)*)a)) return -EFAULT;})
+
+#define PACK_S(r,f)	FP_PACK_SP(&r,f)
+#define UNPACK_S(f,r)	FP_UNPACK_SP(f,&r)
+#define PACK_D(r,f) \
+	{u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
+#define UNPACK_D(f,r) \
+	{u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
+
+// 2 args instructions.
+#define BOTH_PRmn(op,x) \
+	FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
+
+#define CMP_X(SZ,R,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
+#define EQ_X(SZ,R,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
+#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
+
+static int
+fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	if (CMP(CMP) > 0)
+		regs->sr |= 1;
+	else
+		regs->sr &= ~1;
+
+	return 0;
+}
+
+static int
+fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	if (CMP(CMP /*EQ*/) == 0)
+		regs->sr |= 1;
+	else
+		regs->sr &= ~1;
+	return 0;
+}
+
+#define ARITH_X(SZ,OP,M,N) do{ \
+	FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
+	UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+	FP_##OP##_##SZ(Fr, Fn, Fm); \
+	PACK_##SZ(N, Fr); }while(0)
+
+static int
+fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, ADD);
+	return 0;
+}
+
+static int
+fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, SUB);
+	return 0;
+}
+
+static int
+fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, MUL);
+	return 0;
+}
+
+static int
+fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	BOTH_PRmn(ARITH_X, DIV);
+	return 0;
+}
+
+static int
+fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_S(Fr);
+	FP_DECL_S(Ft);
+	FP_DECL_S(F0);
+	FP_DECL_S(Fm);
+	FP_DECL_S(Fn);
+	UNPACK_S(F0, FR0);
+	UNPACK_S(Fm, FRm);
+	UNPACK_S(Fn, FRn);
+	FP_MUL_S(Ft, Fm, F0);
+	FP_ADD_S(Fr, Fn, Ft);
+	PACK_S(FRn, Fr);
+	return 0;
+}
+
+// to process fmov's extention (odd n for DR access XD).
+#define FMOV_EXT(x) if(x&1) x+=16-1
+
+static int
+fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + R0 + 4);
+		n++;
+		READ(FRn, Rm + R0);
+	} else {
+		READ(FRn, Rm + R0);
+	}
+
+	return 0;
+}
+
+static int
+fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + 4);
+		n++;
+		READ(FRn, Rm);
+	} else {
+		READ(FRn, Rm);
+	}
+
+	return 0;
+}
+
+static int
+fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(n);
+		READ(FRn, Rm + 4);
+		n++;
+		READ(FRn, Rm);
+		Rm += 8;
+	} else {
+		READ(FRn, Rm);
+		Rm += 4;
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		WRITE(FRm, Rn + R0 + 4);
+		m++;
+		WRITE(FRm, Rn + R0);
+	} else {
+		WRITE(FRm, Rn + R0);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		WRITE(FRm, Rn + 4);
+		m++;
+		WRITE(FRm, Rn);
+	} else {
+		WRITE(FRm, Rn);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		Rn -= 8;
+		WRITE(FRm, Rn + 4);
+		m++;
+		WRITE(FRm, Rn);
+	} else {
+		Rn -= 4;
+		WRITE(FRm, Rn);
+	}
+
+	return 0;
+}
+
+static int
+fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+	     int n)
+{
+	if (FPSCR_SZ) {
+		FMOV_EXT(m);
+		FMOV_EXT(n);
+		DRn = DRm;
+	} else {
+		FRn = FRm;
+	}
+
+	return 0;
+}
+
+static int
+fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+	return -EINVAL;
+}
+
+// 1 arg instructions.
+#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
+	{ printk( #i " not yet done.\n"); return 0; }
+
+NOTYETn(ftrv)
+NOTYETn(fsqrt)
+NOTYETn(fipr)
+NOTYETn(fsca)
+NOTYETn(fsrra)
+
+#define EMU_FLOAT_X(SZ,N) do { \
+	FP_DECL_##SZ(Fn); \
+	FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
+	PACK_##SZ(N, Fn); }while(0)
+static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+
+	if (FPSCR_PR)
+		EMU_FLOAT_X(D, DRn);
+	else
+		EMU_FLOAT_X(S, FRn);
+
+	return 0;
+}
+
+#define EMU_FTRC_X(SZ,N) do { \
+	FP_DECL_##SZ(Fn); \
+	UNPACK_##SZ(Fn, N); \
+	FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
+static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+
+	if (FPSCR_PR)
+		EMU_FTRC_X(D, DRn);
+	else
+		EMU_FTRC_X(S, FRn);
+
+	return 0;
+}
+
+static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_S(Fn);
+	FP_DECL_D(Fr);
+	UNPACK_S(Fn, FPUL);
+	FP_CONV(D, S, 2, 1, Fr, Fn);
+	PACK_D(DRn, Fr);
+	return 0;
+}
+
+static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FP_DECL_EX;
+	FP_DECL_D(Fn);
+	FP_DECL_S(Fr);
+	UNPACK_D(Fn, DRn);
+	FP_CONV(S, D, 1, 2, Fr, Fn);
+	PACK_S(FPUL, Fr);
+	return 0;
+}
+
+static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
+{
+	FPSCR ^= flag;
+	return 0;
+}
+
+static int fsts(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = FPUL;
+	return 0;
+}
+
+static int flds(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FPUL = FRn;
+	return 0;
+}
+
+static int fneg(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
+	return 0;
+}
+
+static int fabs(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
+	return 0;
+}
+
+static int fld0(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = 0;
+	return 0;
+}
+
+static int fld1(struct sh_fpu_soft_struct *fregs, int n)
+{
+	FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
+	return 0;
+}
+
+static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
+{
+	return -EINVAL;
+}
+
+/// Instruction decoders.
+
+static int id_fxfd(struct sh_fpu_soft_struct *, int);
+static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
+
+static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
+	fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
+	fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
+};
+
+static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
+	fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
+	fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
+	fmov_reg_reg, id_fnxd, fmac, fnop_mn};
+
+static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
+{
+	const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
+	switch (x & 3) {
+	case 3:
+		fxchg(fregs, flag[x >> 2]);
+		break;
+	case 1:
+		ftrv(fregs, x - 1);
+		break;
+	default:
+		fsca(fregs, x);
+	}
+	return 0;
+}
+
+static int
+id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
+{
+	return (fnxd[x])(fregs, n);
+}
+
+static int
+id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+	int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
+	return (fnmx[x])(fregs, regs, m, n);
+}
+
+static int
+id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+	int n = ((code >> 8) & 0xf);
+	unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
+
+	switch (code & 0xf0ff) {
+	case 0x005a:
+	case 0x006a:
+		Rn = *reg;
+		break;
+	case 0x405a:
+	case 0x406a:
+		*reg = Rn;
+		break;
+	case 0x4052:
+	case 0x4062:
+		Rn -= 4;
+		WRITE(*reg, Rn);
+		break;
+	case 0x4056:
+	case 0x4066:
+		READ(*reg, Rn);
+		Rn += 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
+{
+	if ((code & 0xf000) == 0xf000)
+		return id_fnmx(fregs, regs, code);
+	else
+		return id_sys(fregs, regs, code);
+}
+
+/**
+ *	denormal_to_double - Given denormalized float number,
+ *	                     store double float
+ *
+ *	@fpu: Pointer to sh_fpu_hard structure
+ *	@n: Index to FP register
+ */
+static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
+{
+	unsigned long du, dl;
+	unsigned long x = fpu->fpul;
+	int exp = 1023 - 126;
+
+	if (x != 0 && (x & 0x7f800000) == 0) {
+		du = (x & 0x80000000);
+		while ((x & 0x00800000) == 0) {
+			x <<= 1;
+			exp--;
+		}
+		x &= 0x007fffff;
+		du |= (exp << 20) | (x >> 3);
+		dl = x << 29;
+
+		fpu->fp_regs[n] = du;
+		fpu->fp_regs[n+1] = dl;
+	}
+}
+
+/**
+ *	ieee_fpe_handler - Handle denormalized number exception
+ *
+ *	@regs: Pointer to register structure
+ *
+ *	Returns 1 when it's handled (should not cause exception).
+ */
+static int ieee_fpe_handler(struct pt_regs *regs)
+{
+	unsigned short insn = *(unsigned short *)regs->pc;
+	unsigned short finsn;
+	unsigned long nextpc;
+	int nib[4] = {
+		(insn >> 12) & 0xf,
+		(insn >> 8) & 0xf,
+		(insn >> 4) & 0xf,
+		insn & 0xf};
+
+	if (nib[0] == 0xb ||
+	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
+		regs->pr = regs->pc + 4;
+
+	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
+		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		else
+			nextpc = regs->pc + 4;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
+		if (regs->sr & 1)
+			nextpc = regs->pc + 4;
+		else
+			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
+		nextpc = regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
+		nextpc = regs->pc + 4 + regs->regs[nib[1]];
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else if (insn == 0x000b) { /* rts */
+		nextpc = regs->pr;
+		finsn = *(unsigned short *) (regs->pc + 2);
+	} else {
+		nextpc = regs->pc + 2;
+		finsn = insn;
+	}
+
+	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
+		struct task_struct *tsk = current;
+
+		if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) {
+			/* FPU error */
+			denormal_to_double (&tsk->thread.fpu.hard,
+					    (finsn >> 8) & 0xf);
+			tsk->thread.fpu.hard.fpscr &=
+				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+			set_tsk_thread_flag(tsk, TIF_USEDFPU);
+		} else {
+			tsk->thread.trap_no = 11;
+			tsk->thread.error_code = 0;
+			force_sig(SIGFPE, tsk);
+		}
+
+		regs->pc = nextpc;
+		return 1;
+	}
+
+	return 0;
+}
+
+asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5,
+			     unsigned long r6, unsigned long r7,
+			     struct pt_regs regs)
+{
+	struct task_struct *tsk = current;
+
+	if (ieee_fpe_handler (&regs))
+		return;
+
+	regs.pc += 2;
+	tsk->thread.trap_no = 11;
+	tsk->thread.error_code = 0;
+	force_sig(SIGFPE, tsk);
+}
+
+/**
+ * fpu_init - Initialize FPU registers
+ * @fpu: Pointer to software emulated FPU registers.
+ */
+static void fpu_init(struct sh_fpu_soft_struct *fpu)
+{
+	int i;
+
+	fpu->fpscr = FPSCR_INIT;
+	fpu->fpul = 0;
+
+	for (i = 0; i < 16; i++) {
+		fpu->fp_regs[i] = 0;
+		fpu->xfp_regs[i]= 0;
+	}
+}
+
+/**
+ * do_fpu_inst - Handle reserved instructions for FPU emulation
+ * @inst: instruction code.
+ * @regs: registers on stack.
+ */
+int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
+
+	if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+		/* initialize once. */
+		fpu_init(fpu);
+		set_tsk_thread_flag(tsk, TIF_USEDFPU);
+	}
+
+	return fpu_emulate(inst, fpu, regs);
+}
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
new file mode 100644
index 00000000000..8ae1bd310ad
--- /dev/null
+++ b/arch/sh/math-emu/sfp-util.h
@@ -0,0 +1,72 @@
+/*
+ * These are copied from glibc/stdlib/longlong.h
+ */
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+  do {                                                                  \
+    UWtype __x;                                                         \
+    __x = (al) + (bl);                                                  \
+    (sh) = (ah) + (bh) + (__x < (al));                                  \
+    (sl) = __x;                                                         \
+  } while (0)
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+  do {                                                                  \
+    UWtype __x;                                                         \
+    __x = (al) - (bl);                                                  \
+    (sh) = (ah) - (bh) - (__x > (al));                                  \
+    (sl) = __x;                                                         \
+  } while (0)
+
+#define umul_ppmm(w1, w0, u, v) \
+  __asm__ ("dmulu.l %2,%3\n\tsts    macl,%1\n\tsts  mach,%0"	\
+	: "=r" ((u32)(w1)), "=r" ((u32)(w0))	\
+	:  "r" ((u32)(u)),   "r" ((u32)(v))	\
+	: "macl", "mach")
+
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+#define udiv_qrnnd(q, r, n1, n0, d) \
+  do {									\
+    UWtype __d1, __d0, __q1, __q0;					\
+    UWtype __r1, __r0, __m;						\
+    __d1 = __ll_highpart (d);						\
+    __d0 = __ll_lowpart (d);						\
+									\
+    __r1 = (n1) % __d1;							\
+    __q1 = (n1) / __d1;							\
+    __m = (UWtype) __q1 * __d0;						\
+    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
+    if (__r1 < __m)							\
+      {									\
+	__q1--, __r1 += (d);						\
+	if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+	  if (__r1 < __m)						\
+	    __q1--, __r1 += (d);					\
+      }									\
+    __r1 -= __m;							\
+									\
+    __r0 = __r1 % __d1;							\
+    __q0 = __r1 / __d1;							\
+    __m = (UWtype) __q0 * __d0;						\
+    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
+    if (__r0 < __m)							\
+      {									\
+	__q0--, __r0 += (d);						\
+	if (__r0 >= (d))						\
+	  if (__r0 < __m)						\
+	    __q0--, __r0 += (d);					\
+      }									\
+    __r0 -= __m;							\
+									\
+    (q) = (UWtype) __q1 * __ll_B | __q0;				\
+    (r) = __r0;								\
+  } while (0)
+
+#define abort()	return 0
+
+#define __BYTE_ORDER __LITTLE_ENDIAN
+
+
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index fb586b1cf8b..9dd606464d2 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -20,7 +20,10 @@ config CPU_SH4
 config CPU_SH4A
 	bool
 	select CPU_SH4
-	select CPU_HAS_INTC2_IRQ
+
+config CPU_SH4AL_DSP
+	bool
+	select CPU_SH4A
 
 config CPU_SUBTYPE_ST40
 	bool
@@ -48,6 +51,12 @@ config CPU_SUBTYPE_SH7705
 	select CPU_SH3
 	select CPU_HAS_PINT_IRQ
 
+config CPU_SUBTYPE_SH7706
+	bool "Support SH7706 processor"
+	select CPU_SH3
+	help
+	  Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
 config CPU_SUBTYPE_SH7707
 	bool "Support SH7707 processor"
 	select CPU_SH3
@@ -69,6 +78,12 @@ config CPU_SUBTYPE_SH7709
 	help
 	  Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
 
+config CPU_SUBTYPE_SH7710
+	bool "Support SH7710 processor"
+	select CPU_SH3
+	help
+	  Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
 comment "SH-4 Processor Support"
 
 config CPU_SUBTYPE_SH7750
@@ -133,10 +148,6 @@ config CPU_SUBTYPE_ST40GX1
 
 comment "SH-4A Processor Support"
 
-config CPU_SUBTYPE_SH73180
-	bool "Support SH73180 processor"
-	select CPU_SH4A
-
 config CPU_SUBTYPE_SH7770
 	bool "Support SH7770 processor"
 	select CPU_SH4A
@@ -144,6 +155,17 @@ config CPU_SUBTYPE_SH7770
 config CPU_SUBTYPE_SH7780
 	bool "Support SH7780 processor"
 	select CPU_SH4A
+	select CPU_HAS_INTC2_IRQ
+
+comment "SH4AL-DSP Processor Support"
+
+config CPU_SUBTYPE_SH73180
+	bool "Support SH73180 processor"
+	select CPU_SH4AL_DSP
+
+config CPU_SUBTYPE_SH7343
+	bool "Support SH7343 processor"
+	select CPU_SH4AL_DSP
 
 endmenu
 
@@ -161,15 +183,59 @@ config MMU
 	  turning this off will boot the kernel on these machines with the
 	  MMU implicitly switched off.
 
+config PAGE_OFFSET
+	hex
+	default "0x80000000" if MMU
+	default "0x00000000"
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x08000000"
+	---help---
+	  Computers built with Hitachi SuperH processors always
+	  map the ROM starting at address zero.  But the processor
+	  does not specify the range that RAM takes.
+
+	  The physical memory (RAM) start address will be automatically
+	  set to 08000000. Other platforms, such as the Solution Engine
+	  boards typically map RAM at 0C000000.
+
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x00400000"
+	help
+	  This sets the default memory size assumed by your SH kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line. If unsure, consult your board specifications or just leave it
+	  as 0x00400000 which was the default value before this became
+	  configurable.
+
 config 32BIT
 	bool "Support 32-bit physical addressing through PMB"
-	depends on CPU_SH4A
+	depends on CPU_SH4A && MMU
 	default y
 	help
 	  If you say Y here, physical addressing will be extended to
 	  32-bits through the SH-4A PMB. If this is not set, legacy
 	  29-bit physical addressing will be used.
 
+config VSYSCALL
+	bool "Support vsyscall page"
+	depends on MMU
+	default y
+	help
+	  This will enable support for the kernel mapping a vDSO page
+	  in process space, and subsequently handing down the entry point
+	  to the libc through the ELF auxiliary vector.
+
+	  From the kernel side this is used for the signal trampoline.
+	  For systems with an MMU that can afford to give up a page,
+	  (the default value) say Y.
+
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && CPU_SH4 && MMU
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 9489a142464..3ffd7f68c0a 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -6,20 +6,26 @@ obj-y			:= init.o extable.o consistent.o
 
 obj-$(CONFIG_CPU_SH2)	+= cache-sh2.o
 obj-$(CONFIG_CPU_SH3)	+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o pg-sh4.o
+obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o
 
 obj-$(CONFIG_DMA_PAGE_OPS)	+= pg-dma.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 
 mmu-y			:= fault-nommu.o tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault.o clear_page.o copy_page.o
+mmu-$(CONFIG_MMU)	:= fault.o clear_page.o copy_page.o tlb-flush.o	\
+			   ioremap.o
 
 obj-y			+= $(mmu-y)
 
+ifdef CONFIG_DEBUG_FS
+obj-$(CONFIG_CPU_SH4)		+= cache-debugfs.o
+endif
+
 ifdef CONFIG_MMU
-obj-$(CONFIG_CPU_SH3)	+= tlb-sh3.o
-obj-$(CONFIG_CPU_SH4)	+= tlb-sh4.o ioremap.o
+obj-$(CONFIG_CPU_SH3)		+= tlb-sh3.o
+obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o pg-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
 endif
 
-obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
+obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+obj-$(CONFIG_32BIT)		+= pmb.o
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
new file mode 100644
index 00000000000..a22d914e4d1
--- /dev/null
+++ b/arch/sh/mm/cache-debugfs.c
@@ -0,0 +1,147 @@
+/*
+ * debugfs ops for the L1 cache
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+enum cache_type {
+	CACHE_TYPE_ICACHE,
+	CACHE_TYPE_DCACHE,
+	CACHE_TYPE_UNIFIED,
+};
+
+static int cache_seq_show(struct seq_file *file, void *iter)
+{
+	unsigned int cache_type = (unsigned int)file->private;
+	struct cache_info *cache;
+	unsigned int waysize, way, cache_size;
+	unsigned long ccr, base;
+	static unsigned long addrstart = 0;
+
+	/*
+	 * Go uncached immediately so we don't skew the results any
+	 * more than we already are..
+	 */
+	jump_to_P2();
+
+	ccr = ctrl_inl(CCR);
+	if ((ccr & CCR_CACHE_ENABLE) == 0) {
+		back_to_P1();
+
+		seq_printf(file, "disabled\n");
+		return 0;
+	}
+
+	if (cache_type == CACHE_TYPE_DCACHE) {
+		base = CACHE_OC_ADDRESS_ARRAY;
+		cache = &cpu_data->dcache;
+	} else {
+		base = CACHE_IC_ADDRESS_ARRAY;
+		cache = &cpu_data->icache;
+	}
+
+	/*
+	 * Due to the amount of data written out (depending on the cache size),
+	 * we may be iterated over multiple times. In this case, keep track of
+	 * the entry position in addrstart, and rewind it when we've hit the
+	 * end of the cache.
+	 *
+	 * Likewise, the same code is used for multiple caches, so care must
+	 * be taken for bouncing addrstart back and forth so the appropriate
+	 * cache is hit.
+	 */
+	cache_size = cache->ways * cache->sets * cache->linesz;
+	if (((addrstart & 0xff000000) != base) ||
+	     (addrstart & 0x00ffffff) > cache_size)
+		addrstart = base;
+
+	waysize = cache->sets;
+
+	/*
+	 * If the OC is already in RAM mode, we only have
+	 * half of the entries to consider..
+	 */
+	if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
+		waysize >>= 1;
+
+	waysize <<= cache->entry_shift;
+
+	for (way = 0; way < cache->ways; way++) {
+		unsigned long addr;
+		unsigned int line;
+
+		seq_printf(file, "-----------------------------------------\n");
+		seq_printf(file, "Way %d\n", way);
+		seq_printf(file, "-----------------------------------------\n");
+
+		for (addr = addrstart, line = 0;
+		     addr < addrstart + waysize;
+		     addr += cache->linesz, line++) {
+			unsigned long data = ctrl_inl(addr);
+
+			/* Check the V bit, ignore invalid cachelines */
+			if ((data & 1) == 0)
+				continue;
+
+			/* U: Dirty, cache tag is 10 bits up */
+			seq_printf(file, "%3d: %c 0x%lx\n",
+				   line, data & 2 ? 'U' : ' ',
+				   data & 0x1ffffc00);
+		}
+
+		addrstart += cache->way_incr;
+	}
+
+	back_to_P1();
+
+	return 0;
+}
+
+static int cache_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, cache_seq_show, inode->u.generic_ip);
+}
+
+static struct file_operations cache_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= cache_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init cache_debugfs_init(void)
+{
+	struct dentry *dcache_dentry, *icache_dentry;
+
+	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL,
+					    (unsigned int *)CACHE_TYPE_DCACHE,
+					    &cache_debugfs_fops);
+	if (IS_ERR(dcache_dentry))
+		return PTR_ERR(dcache_dentry);
+
+	icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL,
+					    (unsigned int *)CACHE_TYPE_ICACHE,
+					    &cache_debugfs_fops);
+	if (IS_ERR(icache_dentry)) {
+		debugfs_remove(dcache_dentry);
+		return PTR_ERR(icache_dentry);
+	}
+
+	return 0;
+}
+module_init(cache_debugfs_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 524cea5b47f..e48cc22724d 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -2,49 +2,120 @@
  * arch/sh/mm/cache-sh4.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2001, 2002, 2003, 2004  Paul Mundt
+ * Copyright (C) 2001 - 2006  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
 #include <linux/init.h>
-#include <linux/mman.h>
 #include <linux/mm.h>
-#include <linux/threads.h>
 #include <asm/addrspace.h>
-#include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 #include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-extern void __flush_cache_4096_all(unsigned long start);
-static void __flush_cache_4096_all_ex(unsigned long start);
-extern void __flush_dcache_all(void);
-static void __flush_dcache_all_ex(void);
+/*
+ * The maximum number of pages we support up to when doing ranged dcache
+ * flushing. Anything exceeding this will simply flush the dcache in its
+ * entirety.
+ */
+#define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
+
+static void __flush_dcache_segment_1way(unsigned long start,
+					unsigned long extent);
+static void __flush_dcache_segment_2way(unsigned long start,
+					unsigned long extent);
+static void __flush_dcache_segment_4way(unsigned long start,
+					unsigned long extent);
+
+static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+			       unsigned long exec_offset);
+
+/*
+ * This is initialised here to ensure that it is not placed in the BSS.  If
+ * that were to happen, note that cache_init gets called before the BSS is
+ * cleared, so this would get nulled out which would be hopeless.
+ */
+static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
+	(void (*)(unsigned long, unsigned long))0xdeadbeef;
+
+static void compute_alias(struct cache_info *c)
+{
+	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
+	c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1;
+}
+
+static void __init emit_cache_params(void)
+{
+	printk("PVR=%08x CVR=%08x PRR=%08x\n",
+		ctrl_inl(CCN_PVR),
+		ctrl_inl(CCN_CVR),
+		ctrl_inl(CCN_PRR));
+	printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		cpu_data->icache.ways,
+		cpu_data->icache.sets,
+		cpu_data->icache.way_incr);
+	printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		cpu_data->icache.entry_mask,
+		cpu_data->icache.alias_mask,
+		cpu_data->icache.n_aliases);
+	printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		cpu_data->dcache.ways,
+		cpu_data->dcache.sets,
+		cpu_data->dcache.way_incr);
+	printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		cpu_data->dcache.entry_mask,
+		cpu_data->dcache.alias_mask,
+		cpu_data->dcache.n_aliases);
+
+	if (!__flush_dcache_segment_fn)
+		panic("unknown number of cache ways\n");
+}
 
 /*
  * SH-4 has virtually indexed and physically tagged cache.
  */
 
-struct semaphore p3map_sem[4];
+/* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */
+#define MAX_P3_SEMAPHORES 16
+
+struct semaphore p3map_sem[MAX_P3_SEMAPHORES];
 
 void __init p3_cache_init(void)
 {
-	if (remap_area_pages(P3SEG, 0, PAGE_SIZE*4, _PAGE_CACHABLE))
+	int i;
+
+	compute_alias(&cpu_data->icache);
+	compute_alias(&cpu_data->dcache);
+
+	switch (cpu_data->dcache.ways) {
+	case 1:
+		__flush_dcache_segment_fn = __flush_dcache_segment_1way;
+		break;
+	case 2:
+		__flush_dcache_segment_fn = __flush_dcache_segment_2way;
+		break;
+	case 4:
+		__flush_dcache_segment_fn = __flush_dcache_segment_4way;
+		break;
+	default:
+		__flush_dcache_segment_fn = NULL;
+		break;
+	}
+
+	emit_cache_params();
+
+	if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE))
 		panic("%s failed.", __FUNCTION__);
 
-	sema_init (&p3map_sem[0], 1);
-	sema_init (&p3map_sem[1], 1);
-	sema_init (&p3map_sem[2], 1);
-	sema_init (&p3map_sem[3], 1);
+	for (i = 0; i < cpu_data->dcache.n_aliases; i++)
+		sema_init(&p3map_sem[i], 1);
 }
 
 /*
@@ -89,7 +160,6 @@ void __flush_purge_region(void *start, int size)
 	}
 }
 
-
 /*
  * No write back please
  */
@@ -108,40 +178,6 @@ void __flush_invalidate_region(void *start, int size)
 	}
 }
 
-static void __flush_dcache_all_ex(void)
-{
-	unsigned long addr, end_addr, entry_offset;
-
-	end_addr = CACHE_OC_ADDRESS_ARRAY + (cpu_data->dcache.sets << cpu_data->dcache.entry_shift) * cpu_data->dcache.ways;
-	entry_offset = 1 << cpu_data->dcache.entry_shift;
-	for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; addr += entry_offset) {
-		ctrl_outl(0, addr);
-	}
-}
-
-static void __flush_cache_4096_all_ex(unsigned long start)
-{
-	unsigned long addr, entry_offset;
-	int i;
-
-	entry_offset = 1 << cpu_data->dcache.entry_shift;
-	for (i = 0; i < cpu_data->dcache.ways; i++, start += cpu_data->dcache.way_incr) {
-		for (addr = CACHE_OC_ADDRESS_ARRAY + start;
-		     addr < CACHE_OC_ADDRESS_ARRAY + 4096 + start;
-		     addr += entry_offset) {
-			ctrl_outl(0, addr);
-		}
-	}
-}
-
-void flush_cache_4096_all(unsigned long start)
-{
-	if (cpu_data->dcache.ways == 1)
-		__flush_cache_4096_all(start);
-	else
-		__flush_cache_4096_all_ex(start);
-}
-
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
@@ -153,14 +189,14 @@ void flush_icache_range(unsigned long start, unsigned long end)
 }
 
 /*
- * Write back the D-cache and purge the I-cache for signal trampoline. 
+ * Write back the D-cache and purge the I-cache for signal trampoline.
  * .. which happens to be the same behavior as flush_icache_range().
  * So, we simply flush out a line.
  */
 void flush_cache_sigtramp(unsigned long addr)
 {
 	unsigned long v, index;
-	unsigned long flags; 
+	unsigned long flags;
 	int i;
 
 	v = addr & ~(L1_CACHE_BYTES-1);
@@ -172,30 +208,33 @@ void flush_cache_sigtramp(unsigned long addr)
 
 	local_irq_save(flags);
 	jump_to_P2();
-	for(i = 0; i < cpu_data->icache.ways; i++, index += cpu_data->icache.way_incr)
+
+	for (i = 0; i < cpu_data->icache.ways;
+	     i++, index += cpu_data->icache.way_incr)
 		ctrl_outl(0, index);	/* Clear out Valid-bit */
+
 	back_to_P1();
+	wmb();
 	local_irq_restore(flags);
 }
 
 static inline void flush_cache_4096(unsigned long start,
 				    unsigned long phys)
 {
-	unsigned long flags; 
-	extern void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long exec_offset);
+	unsigned long flags, exec_offset = 0;
 
 	/*
-	 * SH7751, SH7751R, and ST40 have no restriction to handle cache.
-	 * (While SH7750 must do that at P2 area.)
+	 * All types of SH-4 require PC to be in P2 to operate on the I-cache.
+	 * Some types of SH-4 require PC to be in P2 to operate on the D-cache.
 	 */
-	if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG)
-	   || start < CACHE_OC_ADDRESS_ARRAY) {
-		local_irq_save(flags);
-		__flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0x20000000);
-		local_irq_restore(flags);
-	} else {
-		__flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0);
-	}
+	if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) ||
+	    (start < CACHE_OC_ADDRESS_ARRAY))
+	    	exec_offset = 0x20000000;
+
+	local_irq_save(flags);
+	__flush_cache_4096(start | SH_CACHE_ASSOC,
+			   P1SEGADDR(phys), exec_offset);
+	local_irq_restore(flags);
 }
 
 /*
@@ -206,15 +245,19 @@ void flush_dcache_page(struct page *page)
 {
 	if (test_bit(PG_mapped, &page->flags)) {
 		unsigned long phys = PHYSADDR(page_address(page));
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
+		int i, n;
 
 		/* Loop all the D-cache */
-		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY,          phys);
-		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x1000, phys);
-		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x2000, phys);
-		flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x3000, phys);
+		n = cpu_data->dcache.n_aliases;
+		for (i = 0; i < n; i++, addr += PAGE_SIZE)
+			flush_cache_4096(addr, phys);
 	}
+
+	wmb();
 }
 
+/* TODO: Selective icache invalidation through IC address array.. */
 static inline void flush_icache_all(void)
 {
 	unsigned long flags, ccr;
@@ -227,34 +270,142 @@ static inline void flush_icache_all(void)
 	ccr |= CCR_CACHE_ICI;
 	ctrl_outl(ccr, CCR);
 
+	/*
+	 * back_to_P1() will take care of the barrier for us, don't add
+	 * another one!
+	 */
+
 	back_to_P1();
 	local_irq_restore(flags);
 }
 
+void flush_dcache_all(void)
+{
+	(*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size);
+	wmb();
+}
+
 void flush_cache_all(void)
 {
-	if (cpu_data->dcache.ways == 1)
-		__flush_dcache_all();
-	else
-		__flush_dcache_all_ex();
+	flush_dcache_all();
 	flush_icache_all();
 }
 
+static void __flush_cache_mm(struct mm_struct *mm, unsigned long start,
+			     unsigned long end)
+{
+	unsigned long d = 0, p = start & PAGE_MASK;
+	unsigned long alias_mask = cpu_data->dcache.alias_mask;
+	unsigned long n_aliases = cpu_data->dcache.n_aliases;
+	unsigned long select_bit;
+	unsigned long all_aliases_mask;
+	unsigned long addr_offset;
+	pgd_t *dir;
+	pmd_t *pmd;
+	pud_t *pud;
+	pte_t *pte;
+	int i;
+
+	dir = pgd_offset(mm, p);
+	pud = pud_offset(dir, p);
+	pmd = pmd_offset(pud, p);
+	end = PAGE_ALIGN(end);
+
+	all_aliases_mask = (1 << n_aliases) - 1;
+
+	do {
+		if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) {
+			p &= PMD_MASK;
+			p += PMD_SIZE;
+			pmd++;
+
+			continue;
+		}
+
+		pte = pte_offset_kernel(pmd, p);
+
+		do {
+			unsigned long phys;
+			pte_t entry = *pte;
+
+			if (!(pte_val(entry) & _PAGE_PRESENT)) {
+				pte++;
+				p += PAGE_SIZE;
+				continue;
+			}
+
+			phys = pte_val(entry) & PTE_PHYS_MASK;
+
+			if ((p ^ phys) & alias_mask) {
+				d |= 1 << ((p & alias_mask) >> PAGE_SHIFT);
+				d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT);
+
+				if (d == all_aliases_mask)
+					goto loop_exit;
+			}
+
+			pte++;
+			p += PAGE_SIZE;
+		} while (p < end && ((unsigned long)pte & ~PAGE_MASK));
+		pmd++;
+	} while (p < end);
+
+loop_exit:
+	addr_offset = 0;
+	select_bit = 1;
+
+	for (i = 0; i < n_aliases; i++) {
+		if (d & select_bit) {
+			(*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE);
+			wmb();
+		}
+
+		select_bit <<= 1;
+		addr_offset += PAGE_SIZE;
+	}
+}
+
+/*
+ * Note : (RPC) since the caches are physically tagged, the only point
+ * of flush_cache_mm for SH-4 is to get rid of aliases from the
+ * D-cache.  The assumption elsewhere, e.g. flush_cache_range, is that
+ * lines can stay resident so long as the virtual address they were
+ * accessed with (hence cache set) is in accord with the physical
+ * address (i.e. tag).  It's no different here.  So I reckon we don't
+ * need to flush the I-cache, since aliases don't matter for that.  We
+ * should try that.
+ *
+ * Caller takes mm->mmap_sem.
+ */
 void flush_cache_mm(struct mm_struct *mm)
 {
-	/* Is there any good way? */
-	/* XXX: possibly call flush_cache_range for each vm area */
-	/* 
-	 * FIXME: Really, the optimal solution here would be able to flush out
-	 * individual lines created by the specified context, but this isn't
-	 * feasible for a number of architectures (such as MIPS, and some
-	 * SPARC) .. is this possible for SuperH?
-	 *
-	 * In the meantime, we'll just flush all of the caches.. this
-	 * seems to be the simplest way to avoid at least a few wasted
-	 * cache flushes. -Lethal
+	/*
+	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
+	 * the cache is physically tagged, the data can just be left in there.
 	 */
-	flush_cache_all();
+	if (cpu_data->dcache.n_aliases == 0)
+		return;
+
+	/*
+	 * Don't bother groveling around the dcache for the VMA ranges
+	 * if there are too many PTEs to make it worthwhile.
+	 */
+	if (mm->nr_ptes >= MAX_DCACHE_PAGES)
+		flush_dcache_all();
+	else {
+		struct vm_area_struct *vma;
+
+		/*
+		 * In this case there are reasonably sized ranges to flush,
+		 * iterate through the VMA list and take care of any aliases.
+		 */
+		for (vma = mm->mmap; vma; vma = vma->vm_next)
+			__flush_cache_mm(mm, vma->vm_start, vma->vm_end);
+	}
+
+	/* Only touch the icache if one of the VMAs has VM_EXEC set. */
+	if (mm->exec_vm)
+		flush_icache_all();
 }
 
 /*
@@ -263,27 +414,40 @@ void flush_cache_mm(struct mm_struct *mm)
  * ADDR: Virtual Address (U0 address)
  * PFN: Physical page number
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn)
+void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
+		      unsigned long pfn)
 {
 	unsigned long phys = pfn << PAGE_SHIFT;
+	unsigned int alias_mask;
+
+	alias_mask = cpu_data->dcache.alias_mask;
 
 	/* We only need to flush D-cache when we have alias */
-	if ((address^phys) & CACHE_ALIAS) {
+	if ((address^phys) & alias_mask) {
 		/* Loop 4K of the D-cache */
 		flush_cache_4096(
-			CACHE_OC_ADDRESS_ARRAY | (address & CACHE_ALIAS),
+			CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
 		/* Loop another 4K of the D-cache */
 		flush_cache_4096(
-			CACHE_OC_ADDRESS_ARRAY | (phys & CACHE_ALIAS),
+			CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
 			phys);
 	}
 
-	if (vma->vm_flags & VM_EXEC)
-		/* Loop 4K (half) of the I-cache */
+	alias_mask = cpu_data->icache.alias_mask;
+	if (vma->vm_flags & VM_EXEC) {
+		/*
+		 * Evict entries from the portion of the cache from which code
+		 * may have been executed at this address (virtual).  There's
+		 * no need to evict from the portion corresponding to the
+		 * physical address as for the D-cache, because we know the
+		 * kernel has never executed the code through its identity
+		 * translation.
+		 */
 		flush_cache_4096(
-			CACHE_IC_ADDRESS_ARRAY | (address & 0x1000),
+			CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
 			phys);
+	}
 }
 
 /*
@@ -298,52 +462,31 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigne
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 		       unsigned long end)
 {
-	unsigned long p = start & PAGE_MASK;
-	pgd_t *dir;
-	pmd_t *pmd;
-	pte_t *pte;
-	pte_t entry;
-	unsigned long phys;
-	unsigned long d = 0;
-
-	dir = pgd_offset(vma->vm_mm, p);
-	pmd = pmd_offset(dir, p);
+	/*
+	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
+	 * the cache is physically tagged, the data can just be left in there.
+	 */
+	if (cpu_data->dcache.n_aliases == 0)
+		return;
 
-	do {
-		if (pmd_none(*pmd) || pmd_bad(*pmd)) {
-			p &= ~((1 << PMD_SHIFT) -1);
-			p += (1 << PMD_SHIFT);
-			pmd++;
-			continue;
-		}
-		pte = pte_offset_kernel(pmd, p);
-		do {
-			entry = *pte;
-			if ((pte_val(entry) & _PAGE_PRESENT)) {
-				phys = pte_val(entry)&PTE_PHYS_MASK;
-				if ((p^phys) & CACHE_ALIAS) {
-					d |= 1 << ((p & CACHE_ALIAS)>>12); 
-					d |= 1 << ((phys & CACHE_ALIAS)>>12);
-					if (d == 0x0f)
-						goto loop_exit;
-				}
-			}
-			pte++;
-			p += PAGE_SIZE;
-		} while (p < end && ((unsigned long)pte & ~PAGE_MASK));
-		pmd++;
-	} while (p < end);
- loop_exit:
-	if (d & 1)
-		flush_cache_4096_all(0);
-	if (d & 2)
-		flush_cache_4096_all(0x1000);
-	if (d & 4)
-		flush_cache_4096_all(0x2000);
-	if (d & 8)
-		flush_cache_4096_all(0x3000);
-	if (vma->vm_flags & VM_EXEC)
+	/*
+	 * Don't bother with the lookup and alias check if we have a
+	 * wide range to cover, just blow away the dcache in its
+	 * entirety instead. -- PFM.
+	 */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES)
+		flush_dcache_all();
+	else
+		__flush_cache_mm(vma->vm_mm, start, end);
+
+	if (vma->vm_flags & VM_EXEC) {
+		/*
+		 * TODO: Is this required???  Need to look at how I-cache
+		 * coherency is assured when new programs are loaded to see if
+		 * this matters.
+		 */
 		flush_icache_all();
+	}
 }
 
 /*
@@ -357,5 +500,273 @@ void flush_icache_user_range(struct vm_area_struct *vma,
 			     struct page *page, unsigned long addr, int len)
 {
 	flush_cache_page(vma, addr, page_to_pfn(page));
+	mb();
+}
+
+/**
+ * __flush_cache_4096
+ *
+ * @addr:  address in memory mapped cache array
+ * @phys:  P1 address to flush (has to match tags if addr has 'A' bit
+ *         set i.e. associative write)
+ * @exec_offset: set to 0x20000000 if flush has to be executed from P2
+ *               region else 0x0
+ *
+ * The offset into the cache array implied by 'addr' selects the
+ * 'colour' of the virtual address range that will be flushed.  The
+ * operation (purge/write-back) is selected by the lower 2 bits of
+ * 'phys'.
+ */
+static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+			       unsigned long exec_offset)
+{
+	int way_count;
+	unsigned long base_addr = addr;
+	struct cache_info *dcache;
+	unsigned long way_incr;
+	unsigned long a, ea, p;
+	unsigned long temp_pc;
+
+	dcache = &cpu_data->dcache;
+	/* Write this way for better assembly. */
+	way_count = dcache->ways;
+	way_incr = dcache->way_incr;
+
+	/*
+	 * Apply exec_offset (i.e. branch to P2 if required.).
+	 *
+	 * FIXME:
+	 *
+	 *	If I write "=r" for the (temp_pc), it puts this in r6 hence
+	 *	trashing exec_offset before it's been added on - why?  Hence
+	 *	"=&r" as a 'workaround'
+	 */
+	asm volatile("mov.l 1f, %0\n\t"
+		     "add   %1, %0\n\t"
+		     "jmp   @%0\n\t"
+		     "nop\n\t"
+		     ".balign 4\n\t"
+		     "1:  .long 2f\n\t"
+		     "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
+
+	/*
+	 * We know there will be >=1 iteration, so write as do-while to avoid
+	 * pointless nead-of-loop check for 0 iterations.
+	 */
+	do {
+		ea = base_addr + PAGE_SIZE;
+		a = base_addr;
+		p = phys;
+
+		do {
+			*(volatile unsigned long *)a = p;
+			/*
+			 * Next line: intentionally not p+32, saves an add, p
+			 * will do since only the cache tag bits need to
+			 * match.
+			 */
+			*(volatile unsigned long *)(a+32) = p;
+			a += 64;
+			p += 64;
+		} while (a < ea);
+
+		base_addr += way_incr;
+	} while (--way_count != 0);
 }
 
+/*
+ * Break the 1, 2 and 4 way variants of this out into separate functions to
+ * avoid nearly all the overhead of having the conditional stuff in the function
+ * bodies (+ the 1 and 2 way cases avoid saving any registers too).
+ */
+static void __flush_dcache_segment_1way(unsigned long start,
+					unsigned long extent_per_way)
+{
+	unsigned long orig_sr, sr_with_bl;
+	unsigned long base_addr;
+	unsigned long way_incr, linesz, way_size;
+	struct cache_info *dcache;
+	register unsigned long a0, a0e;
+
+	asm volatile("stc sr, %0" : "=r" (orig_sr));
+	sr_with_bl = orig_sr | (1<<28);
+	base_addr = ((unsigned long)&empty_zero_page[0]);
+
+	/*
+	 * The previous code aligned base_addr to 16k, i.e. the way_size of all
+	 * existing SH-4 D-caches.  Whilst I don't see a need to have this
+	 * aligned to any better than the cache line size (which it will be
+	 * anyway by construction), let's align it to at least the way_size of
+	 * any existing or conceivable SH-4 D-cache.  -- RPC
+	 */
+	base_addr = ((base_addr >> 16) << 16);
+	base_addr |= start;
+
+	dcache = &cpu_data->dcache;
+	linesz = dcache->linesz;
+	way_incr = dcache->way_incr;
+	way_size = dcache->way_size;
+
+	a0 = base_addr;
+	a0e = base_addr + extent_per_way;
+	do {
+		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+		asm volatile("movca.l r0, @%0\n\t"
+			     "ocbi @%0" : : "r" (a0));
+		a0 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "ocbi @%0" : : "r" (a0));
+		a0 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "ocbi @%0" : : "r" (a0));
+		a0 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "ocbi @%0" : : "r" (a0));
+		asm volatile("ldc %0, sr" : : "r" (orig_sr));
+		a0 += linesz;
+	} while (a0 < a0e);
+}
+
+static void __flush_dcache_segment_2way(unsigned long start,
+					unsigned long extent_per_way)
+{
+	unsigned long orig_sr, sr_with_bl;
+	unsigned long base_addr;
+	unsigned long way_incr, linesz, way_size;
+	struct cache_info *dcache;
+	register unsigned long a0, a1, a0e;
+
+	asm volatile("stc sr, %0" : "=r" (orig_sr));
+	sr_with_bl = orig_sr | (1<<28);
+	base_addr = ((unsigned long)&empty_zero_page[0]);
+
+	/* See comment under 1-way above */
+	base_addr = ((base_addr >> 16) << 16);
+	base_addr |= start;
+
+	dcache = &cpu_data->dcache;
+	linesz = dcache->linesz;
+	way_incr = dcache->way_incr;
+	way_size = dcache->way_size;
+
+	a0 = base_addr;
+	a1 = a0 + way_incr;
+	a0e = base_addr + extent_per_way;
+	do {
+		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1" : :
+			     "r" (a0), "r" (a1));
+		a0 += linesz;
+		a1 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1" : :
+			     "r" (a0), "r" (a1));
+		a0 += linesz;
+		a1 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1" : :
+			     "r" (a0), "r" (a1));
+		a0 += linesz;
+		a1 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1" : :
+			     "r" (a0), "r" (a1));
+		asm volatile("ldc %0, sr" : : "r" (orig_sr));
+		a0 += linesz;
+		a1 += linesz;
+	} while (a0 < a0e);
+}
+
+static void __flush_dcache_segment_4way(unsigned long start,
+					unsigned long extent_per_way)
+{
+	unsigned long orig_sr, sr_with_bl;
+	unsigned long base_addr;
+	unsigned long way_incr, linesz, way_size;
+	struct cache_info *dcache;
+	register unsigned long a0, a1, a2, a3, a0e;
+
+	asm volatile("stc sr, %0" : "=r" (orig_sr));
+	sr_with_bl = orig_sr | (1<<28);
+	base_addr = ((unsigned long)&empty_zero_page[0]);
+
+	/* See comment under 1-way above */
+	base_addr = ((base_addr >> 16) << 16);
+	base_addr |= start;
+
+	dcache = &cpu_data->dcache;
+	linesz = dcache->linesz;
+	way_incr = dcache->way_incr;
+	way_size = dcache->way_size;
+
+	a0 = base_addr;
+	a1 = a0 + way_incr;
+	a2 = a1 + way_incr;
+	a3 = a2 + way_incr;
+	a0e = base_addr + extent_per_way;
+	do {
+		asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "movca.l r0, @%2\n\t"
+			     "movca.l r0, @%3\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1\n\t"
+			     "ocbi @%2\n\t"
+			     "ocbi @%3\n\t" : :
+			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+		a0 += linesz;
+		a1 += linesz;
+		a2 += linesz;
+		a3 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "movca.l r0, @%2\n\t"
+			     "movca.l r0, @%3\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1\n\t"
+			     "ocbi @%2\n\t"
+			     "ocbi @%3\n\t" : :
+			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+		a0 += linesz;
+		a1 += linesz;
+		a2 += linesz;
+		a3 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "movca.l r0, @%2\n\t"
+			     "movca.l r0, @%3\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1\n\t"
+			     "ocbi @%2\n\t"
+			     "ocbi @%3\n\t" : :
+			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+		a0 += linesz;
+		a1 += linesz;
+		a2 += linesz;
+		a3 += linesz;
+		asm volatile("movca.l r0, @%0\n\t"
+			     "movca.l r0, @%1\n\t"
+			     "movca.l r0, @%2\n\t"
+			     "movca.l r0, @%3\n\t"
+			     "ocbi @%0\n\t"
+			     "ocbi @%1\n\t"
+			     "ocbi @%2\n\t"
+			     "ocbi @%3\n\t" : :
+			     "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+		asm volatile("ldc %0, sr" : : "r" (orig_sr));
+		a0 += linesz;
+		a1 += linesz;
+		a2 += linesz;
+		a3 += linesz;
+	} while (a0 < a0e);
+}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index bf94eedb0a8..045abdf078f 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -9,7 +9,6 @@
  * for more details.
  *
  */
-
 #include <linux/init.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
@@ -25,14 +24,10 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-/* The 32KB cache on the SH7705 suffers from the same synonym problem
- * as SH4 CPUs */
-
-#define __pte_offset(address) \
-		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
-		__pte_offset(address))
-
+/*
+ * The 32KB cache on the SH7705 suffers from the same synonym problem
+ * as SH4 CPUs
+ */
 static inline void cache_wback_all(void)
 {
 	unsigned long ways, waysize, addrstart;
@@ -73,7 +68,6 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	__flush_wback_region((void *)start, end - start);
 }
 
-
 /*
  * Writeback&Invalidate the D-cache of the page
  */
@@ -128,7 +122,6 @@ static void __flush_dcache_page(unsigned long phys)
 	local_irq_restore(flags);
 }
 
-
 /*
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
@@ -186,7 +179,8 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
  *
  * ADDRESS: Virtual Address (U0 address)
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn)
+void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
+		      unsigned long pfn)
 {
 	__flush_dcache_page(pfn << PAGE_SHIFT);
 }
@@ -203,4 +197,3 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 {
 	__flush_purge_region(page_address(page), PAGE_SIZE);
 }
-
diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S
index 08acead7b2a..7b96425ae27 100644
--- a/arch/sh/mm/clear_page.S
+++ b/arch/sh/mm/clear_page.S
@@ -193,102 +193,5 @@ ENTRY(__clear_user_page)
 	 nop
 .L4096:	.word	4096
 
-ENTRY(__flush_cache_4096)
-	mov.l	1f,r3
-	add	r6,r3
-	mov	r4,r0
-	mov	#64,r2
-	shll	r2
-	mov	#64,r6
-	jmp	@r3
-	 mov	#96,r7
-	.align	2
-1:	.long	2f
-2:
-	.rept	32
-	mov.l	r5,@r0
-	mov.l	r5,@(32,r0)
-	mov.l	r5,@(r0,r6)
-	mov.l	r5,@(r0,r7)
-	add	r2,r5
-	add	r2,r0
-	.endr
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	rts
-	 nop
-
-ENTRY(__flush_dcache_all)
-	mov.l	2f,r0
-	mov.l	3f,r4
-	and	r0,r4		! r4 = (unsigned long)&empty_zero_page[0] & ~0xffffc000
-	stc	sr,r1		! save SR
-	mov.l	4f,r2
-	or	r1,r2
-	mov	#32,r3
-	shll2	r3
-1:
-	ldc	r2,sr		! set BL bit
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	ldc	r1,sr		! restore SR
-	dt	r3
-	bf/s	1b
-	 add	#32,r4
-
-	rts
-	 nop
-	.align	2
-2:	.long	0xffffc000
-3:	.long	empty_zero_page
-4:	.long	0x10000000	! BL bit
-
-/* __flush_cache_4096_all(unsigned long addr) */
-ENTRY(__flush_cache_4096_all)
-	mov.l	2f,r0
-	mov.l	3f,r2
-	and	r0,r2
-	or	r2,r4		! r4 = addr | (unsigned long)&empty_zero_page[0] & ~0x3fff
-	stc	sr,r1		! save SR
-	mov.l	4f,r2
-	or	r1,r2
-	mov	#32,r3
-1:
-	ldc	r2,sr		! set BL bit
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	add	#32,r4
-	movca.l	r0,@r4
-	ocbi	@r4
-	ldc	r1,sr		! restore SR
-	dt	r3
-	bf/s	1b
-	 add	#32,r4
-
-	rts
-	 nop
-	.align	2
-2:	.long	0xffffc000
-3:	.long	empty_zero_page
-4:	.long	0x10000000	! BL bit
 #endif
+
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index ee73e30263a..c81e6b67ad3 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -9,6 +9,8 @@
  */
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/addrspace.h>
 #include <asm/io.h>
 
 void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 775f86cd3fe..c69fd603226 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -1,33 +1,22 @@
-/* $Id: fault.c,v 1.14 2004/01/13 05:52:11 kkojima Exp $
+/*
+ * Page fault handler for SH with an MMU.
  *
- *  linux/arch/sh/mm/fault.c
  *  Copyright (C) 1999  Niibe Yutaka
  *  Copyright (C) 2003  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/fault.c:
  *   Copyright (C) 1995  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
 #include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
 #include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
 #include <asm/kgdb.h>
 
 extern void die(const char *,struct pt_regs *,long);
@@ -187,18 +176,30 @@ do_sigbus:
 		goto no_context;
 }
 
+#ifdef CONFIG_SH_STORE_QUEUES
 /*
- * Called with interrupt disabled.
+ * This is a special case for the SH-4 store queues, as pages for this
+ * space still need to be faulted in before it's possible to flush the
+ * store queue cache for writeout to the remapped region.
  */
-asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
-			       unsigned long address)
+#define P3_ADDR_MAX		(P4SEG_STORE_QUE + 0x04000000)
+#else
+#define P3_ADDR_MAX		P4SEG
+#endif
+
+/*
+ * Called with interrupts disabled.
+ */
+asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
+					 unsigned long writeaccess,
+					 unsigned long address)
 {
-	unsigned long addrmax = P4SEG;
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	struct mm_struct *mm;
+	struct mm_struct *mm = current->mm;
 	spinlock_t *ptl;
 	int ret = 1;
 
@@ -207,31 +208,37 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 		kgdb_bus_err_hook();
 #endif
 
-#ifdef CONFIG_SH_STORE_QUEUES
-	addrmax = P4SEG_STORE_QUE + 0x04000000;
-#endif
-
-	if (address >= P3SEG && address < addrmax) {
+	/*
+	 * We don't take page faults for P1, P2, and parts of P4, these
+	 * are always mapped, whether it be due to legacy behaviour in
+	 * 29-bit mode, or due to PMB configuration in 32-bit mode.
+	 */
+	if (address >= P3SEG && address < P3_ADDR_MAX) {
 		pgd = pgd_offset_k(address);
 		mm = NULL;
-	} else if (address >= TASK_SIZE)
-		return 1;
-	else if (!(mm = current->mm))
-		return 1;
-	else
+	} else {
+		if (unlikely(address >= TASK_SIZE || !mm))
+			return 1;
+
 		pgd = pgd_offset(mm, address);
+	}
 
-	pmd = pmd_offset(pgd, address);
+	pud = pud_offset(pgd, address);
+	if (pud_none_or_clear_bad(pud))
+		return 1;
+	pmd = pmd_offset(pud, address);
 	if (pmd_none_or_clear_bad(pmd))
 		return 1;
+
 	if (mm)
 		pte = pte_offset_map_lock(mm, pmd, address, &ptl);
 	else
 		pte = pte_offset_kernel(pmd, address);
 
 	entry = *pte;
-	if (pte_none(entry) || pte_not_present(entry)
-	    || (writeaccess && !pte_write(entry)))
+	if (unlikely(pte_none(entry) || pte_not_present(entry)))
+		goto unlock;
+	if (unlikely(writeaccess && !pte_write(entry)))
 		goto unlock;
 
 	if (writeaccess)
@@ -243,13 +250,7 @@ asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	 * ITLB is not affected by "ldtlb" instruction.
 	 * So, we need to flush the entry by ourselves.
 	 */
-
-	{
-		unsigned long flags;
-		local_irq_save(flags);
-		__flush_tlb_page(get_asid(), address&PAGE_MASK);
-		local_irq_restore(flags);
-	}
+	__flush_tlb_page(get_asid(), address & PAGE_MASK);
 #endif
 
 	set_pte(pte, entry);
@@ -260,121 +261,3 @@ unlock:
 		pte_unmap_unlock(pte, ptl);
 	return ret;
 }
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
-	if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) {
-		unsigned long flags;
-		unsigned long asid;
-		unsigned long saved_asid = MMU_NO_ASID;
-
-		asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK;
-		page &= PAGE_MASK;
-
-		local_irq_save(flags);
-		if (vma->vm_mm != current->mm) {
-			saved_asid = get_asid();
-			set_asid(asid);
-		}
-		__flush_tlb_page(asid, page);
-		if (saved_asid != MMU_NO_ASID)
-			set_asid(saved_asid);
-		local_irq_restore(flags);
-	}
-}
-
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-{
-	struct mm_struct *mm = vma->vm_mm;
-
-	if (mm->context != NO_CONTEXT) {
-		unsigned long flags;
-		int size;
-
-		local_irq_save(flags);
-		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-		if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
-			mm->context = NO_CONTEXT;
-			if (mm == current->mm)
-				activate_context(mm);
-		} else {
-			unsigned long asid = mm->context&MMU_CONTEXT_ASID_MASK;
-			unsigned long saved_asid = MMU_NO_ASID;
-
-			start &= PAGE_MASK;
-			end += (PAGE_SIZE - 1);
-			end &= PAGE_MASK;
-			if (mm != current->mm) {
-				saved_asid = get_asid();
-				set_asid(asid);
-			}
-			while (start < end) {
-				__flush_tlb_page(asid, start);
-				start += PAGE_SIZE;
-			}
-			if (saved_asid != MMU_NO_ASID)
-				set_asid(saved_asid);
-		}
-		local_irq_restore(flags);
-	}
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	unsigned long flags;
-	int size;
-
-	local_irq_save(flags);
-	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
-	if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
-		flush_tlb_all();
-	} else {
-		unsigned long asid = init_mm.context&MMU_CONTEXT_ASID_MASK;
-		unsigned long saved_asid = get_asid();
-
-		start &= PAGE_MASK;
-		end += (PAGE_SIZE - 1);
-		end &= PAGE_MASK;
-		set_asid(asid);
-		while (start < end) {
-			__flush_tlb_page(asid, start);
-			start += PAGE_SIZE;
-		}
-		set_asid(saved_asid);
-	}
-	local_irq_restore(flags);
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	/* Invalidate all TLB of this process. */
-	/* Instead of invalidating each TLB, we get new MMU context. */
-	if (mm->context != NO_CONTEXT) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		mm->context = NO_CONTEXT;
-		if (mm == current->mm)
-			activate_context(mm);
-		local_irq_restore(flags);
-	}
-}
-
-void flush_tlb_all(void)
-{
-	unsigned long flags, status;
-
-	/*
-	 * Flush all the TLB.
-	 *
-	 * Write to the MMU control register's bit:
-	 * 	TF-bit for SH-3, TI-bit for SH-4.
-	 *      It's same position, bit #2.
-	 */
-	local_irq_save(flags);
-	status = ctrl_inl(MMUCR);
-	status |= 0x04;		
-	ctrl_outl(status, MMUCR);
-	local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 2a85bc15a41..329059d6b54 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -26,61 +26,41 @@
 pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd) {
-		pmd = pmd_alloc(mm, pgd, addr);
-		if (pmd)
-			pte = pte_alloc_map(mm, pmd, addr);
+		pud = pud_alloc(mm, pgd, addr);
+		if (pud) {
+			pmd = pmd_alloc(mm, pud, addr);
+			if (pmd)
+				pte = pte_alloc_map(mm, pmd, addr);
+		}
 	}
+
 	return pte;
 }
 
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte = NULL;
 
 	pgd = pgd_offset(mm, addr);
 	if (pgd) {
-		pmd = pmd_offset(pgd, addr);
-		if (pmd)
-			pte = pte_offset_map(pmd, addr);
-	}
-	return pte;
-}
-
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-		     pte_t *ptep, pte_t entry)
-{
-	int i;
-
-	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		set_pte_at(mm, addr, ptep, entry);
-		ptep++;
-		addr += PAGE_SIZE;
-		pte_val(entry) += PAGE_SIZE;
+		pud = pud_offset(pgd, addr);
+		if (pud) {
+			pmd = pmd_offset(pud, addr);
+			if (pmd)
+				pte = pte_offset_map(pmd, addr);
+		}
 	}
-}
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep)
-{
-	pte_t entry;
-	int i;
-
-	entry = *ptep;
 
-	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
-		pte_clear(mm, addr, ptep);
-		addr += PAGE_SIZE;
-		ptep++;
-	}
-
-	return entry;
+	return pte;
 }
 
 struct page *follow_huge_addr(struct mm_struct *mm,
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8ea27ca4b70..7154d1ce978 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -24,7 +24,7 @@
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
-
+#include <linux/proc_fs.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -80,6 +80,7 @@ void show_mem(void)
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 
@@ -89,7 +90,17 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 		return;
 	}
 
-	pmd = pmd_offset(pgd, addr);
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud)) {
+		pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC);
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER));
+		if (pmd != pmd_offset(pud, 0)) {
+			pud_ERROR(*pud);
+			return;
+		}
+	}
+
+	pmd = pmd_offset(pud, addr);
 	if (pmd_none(*pmd)) {
 		pte = (pte_t *)get_zeroed_page(GFP_ATOMIC);
 		set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
@@ -212,6 +223,8 @@ void __init paging_init(void)
 	free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
 }
 
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
 void __init mem_init(void)
 {
 	extern unsigned long empty_zero_page[1024];
@@ -237,8 +250,13 @@ void __init mem_init(void)
 	 * Setup wrappers for copy/clear_page(), these will get overridden
 	 * later in the boot process if a better method is available.
 	 */
+#ifdef CONFIG_MMU
 	copy_page = copy_page_slow;
 	clear_page = clear_page_slow;
+#else
+	copy_page = copy_page_nommu;
+	clear_page = clear_page_nommu;
+#endif
 
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
@@ -254,7 +272,12 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+		   VMALLOC_END - VMALLOC_START);
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
+	       "%dk reserved, %dk data, %dk init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
 		max_mapnr << (PAGE_SHIFT-10),
 		codesize >> 10,
@@ -263,6 +286,9 @@ void __init mem_init(void)
 		initsize >> 10);
 
 	p3_cache_init();
+
+	/* Initialize the vDSO */
+	vsyscall_init();
 }
 
 void free_initmem(void)
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index 96fa4a999e2..a9fe80cfc23 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -15,6 +15,7 @@
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
@@ -135,6 +136,20 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 		return (void __iomem *)phys_to_virt(phys_addr);
 
 	/*
+	 * If we're on an SH7751 or SH7780 PCI controller, PCI memory is
+	 * mapped at the end of the address space (typically 0xfd000000)
+	 * in a non-translatable area, so mapping through page tables for
+	 * this area is not only pointless, but also fundamentally
+	 * broken. Just return the physical address instead.
+	 *
+	 * For boards that map a small PCI memory aperture somewhere in
+	 * P1/P2 space, ioremap() will already do the right thing,
+	 * and we'll never get this far.
+	 */
+	if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
+		return (void __iomem *)phys_addr;
+
+	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
 	if (phys_addr < virt_to_phys(high_memory))
@@ -192,7 +207,7 @@ void __iounmap(void __iomem *addr)
 	unsigned long vaddr = (unsigned long __force)addr;
 	struct vm_struct *p;
 
-	if (PXSEG(vaddr) < P3SEG)
+	if (PXSEG(vaddr) < P3SEG || is_pci_memaddr(vaddr))
 		return;
 
 #ifdef CONFIG_32BIT
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
index 8f9165a4e33..d15221beaa1 100644
--- a/arch/sh/mm/pg-nommu.c
+++ b/arch/sh/mm/pg-nommu.c
@@ -14,23 +14,24 @@
 #include <linux/string.h>
 #include <asm/page.h>
 
-static void copy_page_nommu(void *to, void *from)
+void copy_page_nommu(void *to, void *from)
 {
 	memcpy(to, from, PAGE_SIZE);
 }
 
-static void clear_page_nommu(void *to)
+void clear_page_nommu(void *to)
 {
 	memset(to, 0, PAGE_SIZE);
 }
 
-static int __init pg_nommu_init(void)
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
 {
-	copy_page = copy_page_nommu;
-	clear_page = clear_page_nommu;
-
+	memcpy(to, from, n);
 	return 0;
 }
 
-subsys_initcall(pg_nommu_init);
-
+__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+{
+	memset(to, 0, n);
+	return 0;
+}
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index c776b60fc25..07371ed7a31 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -2,7 +2,7 @@
  * arch/sh/mm/pg-sh4.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002  Paul Mundt
+ * Copyright (C) 2002 - 2005  Paul Mundt
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -23,6 +23,8 @@
 
 extern struct semaphore p3map_sem[];
 
+#define CACHE_ALIAS (cpu_data->dcache.alias_mask)
+
 /*
  * clear_user_page
  * @to: P1 address
@@ -35,14 +37,15 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		clear_page(to);
 	else {
-		pgprot_t pgprot = __pgprot(_PAGE_PRESENT | 
+		pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
 					   _PAGE_RW | _PAGE_CACHABLE |
-					   _PAGE_DIRTY | _PAGE_ACCESSED | 
+					   _PAGE_DIRTY | _PAGE_ACCESSED |
 					   _PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
 		unsigned long phys_addr = PHYSADDR(to);
 		unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
-		pgd_t *dir = pgd_offset_k(p3_addr);
-		pmd_t *pmd = pmd_offset(dir, p3_addr);
+		pgd_t *pgd = pgd_offset_k(p3_addr);
+		pud_t *pud = pud_offset(pgd, p3_addr);
+		pmd_t *pmd = pmd_offset(pud, p3_addr);
 		pte_t *pte = pte_offset_kernel(pmd, p3_addr);
 		pte_t entry;
 		unsigned long flags;
@@ -67,21 +70,22 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
  * @address: U0 address to be mapped
  * @page: page (virt_to_page(to))
  */
-void copy_user_page(void *to, void *from, unsigned long address, 
+void copy_user_page(void *to, void *from, unsigned long address,
 		    struct page *page)
 {
 	__set_bit(PG_mapped, &page->flags);
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		copy_page(to, from);
 	else {
-		pgprot_t pgprot = __pgprot(_PAGE_PRESENT | 
+		pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
 					   _PAGE_RW | _PAGE_CACHABLE |
-					   _PAGE_DIRTY | _PAGE_ACCESSED | 
+					   _PAGE_DIRTY | _PAGE_ACCESSED |
 					   _PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
 		unsigned long phys_addr = PHYSADDR(to);
 		unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
-		pgd_t *dir = pgd_offset_k(p3_addr);
-		pmd_t *pmd = pmd_offset(dir, p3_addr);
+		pgd_t *pgd = pgd_offset_k(p3_addr);
+		pud_t *pud = pud_offset(pgd, p3_addr);
+		pmd_t *pmd = pmd_offset(pud, p3_addr);
 		pte_t *pte = pte_offset_kernel(pmd, p3_addr);
 		pte_t entry;
 		unsigned long flags;
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
new file mode 100644
index 00000000000..92e745341e4
--- /dev/null
+++ b/arch/sh/mm/pmb.c
@@ -0,0 +1,400 @@
+/*
+ * arch/sh/mm/pmb.c
+ *
+ * Privileged Space Mapping Buffer (PMB) Support.
+ *
+ * Copyright (C) 2005, 2006 Paul Mundt
+ *
+ * P1/P2 Section mapping definitions from map32.h, which was:
+ *
+ *	Copyright 2003 (c) Lineo Solutions,Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+
+#define NR_PMB_ENTRIES	16
+
+static kmem_cache_t *pmb_cache;
+static unsigned long pmb_map;
+
+static struct pmb_entry pmb_init_map[] = {
+	/* vpn         ppn         flags (ub/sz/c/wt) */
+
+	/* P1 Section Mappings */
+	{ 0x80000000, 0x00000000, PMB_SZ_64M  | PMB_C, },
+	{ 0x84000000, 0x04000000, PMB_SZ_64M  | PMB_C, },
+	{ 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, },
+	{ 0x90000000, 0x10000000, PMB_SZ_64M  | PMB_C, },
+	{ 0x94000000, 0x14000000, PMB_SZ_64M  | PMB_C, },
+	{ 0x98000000, 0x18000000, PMB_SZ_64M  | PMB_C, },
+
+	/* P2 Section Mappings */
+	{ 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
+	{ 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
+	{ 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, },
+	{ 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
+	{ 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
+	{ 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M  | PMB_WT, },
+};
+
+static inline unsigned long mk_pmb_entry(unsigned int entry)
+{
+	return (entry & PMB_E_MASK) << PMB_E_SHIFT;
+}
+
+static inline unsigned long mk_pmb_addr(unsigned int entry)
+{
+	return mk_pmb_entry(entry) | PMB_ADDR;
+}
+
+static inline unsigned long mk_pmb_data(unsigned int entry)
+{
+	return mk_pmb_entry(entry) | PMB_DATA;
+}
+
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+			    unsigned long flags)
+{
+	struct pmb_entry *pmbe;
+
+	pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL);
+	if (!pmbe)
+		return ERR_PTR(-ENOMEM);
+
+	pmbe->vpn	= vpn;
+	pmbe->ppn	= ppn;
+	pmbe->flags	= flags;
+
+	return pmbe;
+}
+
+void pmb_free(struct pmb_entry *pmbe)
+{
+	kmem_cache_free(pmb_cache, pmbe);
+}
+
+/*
+ * Must be in P2 for __set_pmb_entry()
+ */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+		    unsigned long flags, int *entry)
+{
+	unsigned int pos = *entry;
+
+	if (unlikely(pos == PMB_NO_ENTRY))
+		pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
+
+repeat:
+	if (unlikely(pos > NR_PMB_ENTRIES))
+		return -ENOSPC;
+
+	if (test_and_set_bit(pos, &pmb_map)) {
+		pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
+		goto repeat;
+	}
+
+	ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
+
+#ifdef CONFIG_SH_WRITETHROUGH
+	/*
+	 * When we are in 32-bit address extended mode, CCR.CB becomes
+	 * invalid, so care must be taken to manually adjust cacheable
+	 * translations.
+	 */
+	if (likely(flags & PMB_C))
+		flags |= PMB_WT;
+#endif
+
+	ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
+
+	*entry = pos;
+
+	return 0;
+}
+
+int set_pmb_entry(struct pmb_entry *pmbe)
+{
+	int ret;
+
+	jump_to_P2();
+	ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry);
+	back_to_P1();
+
+	return ret;
+}
+
+void clear_pmb_entry(struct pmb_entry *pmbe)
+{
+	unsigned int entry = pmbe->entry;
+	unsigned long addr;
+
+	/*
+	 * Don't allow clearing of wired init entries, P1 or P2 access
+	 * without a corresponding mapping in the PMB will lead to reset
+	 * by the TLB.
+	 */
+	if (unlikely(entry < ARRAY_SIZE(pmb_init_map) ||
+		     entry >= NR_PMB_ENTRIES))
+		return;
+
+	jump_to_P2();
+
+	/* Clear V-bit */
+	addr = mk_pmb_addr(entry);
+	ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
+
+	addr = mk_pmb_data(entry);
+	ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
+
+	back_to_P1();
+
+	clear_bit(entry, &pmb_map);
+}
+
+static DEFINE_SPINLOCK(pmb_list_lock);
+static struct pmb_entry *pmb_list;
+
+static inline void pmb_list_add(struct pmb_entry *pmbe)
+{
+	struct pmb_entry **p, *tmp;
+
+	p = &pmb_list;
+	while ((tmp = *p) != NULL)
+		p = &tmp->next;
+
+	pmbe->next = tmp;
+	*p = pmbe;
+}
+
+static inline void pmb_list_del(struct pmb_entry *pmbe)
+{
+	struct pmb_entry **p, *tmp;
+
+	for (p = &pmb_list; (tmp = *p); p = &tmp->next)
+		if (tmp == pmbe) {
+			*p = tmp->next;
+			return;
+		}
+}
+
+static struct {
+	unsigned long size;
+	int flag;
+} pmb_sizes[] = {
+	{ .size	= 0x20000000, .flag = PMB_SZ_512M, },
+	{ .size = 0x08000000, .flag = PMB_SZ_128M, },
+	{ .size = 0x04000000, .flag = PMB_SZ_64M,  },
+	{ .size = 0x01000000, .flag = PMB_SZ_16M,  },
+};
+
+long pmb_remap(unsigned long vaddr, unsigned long phys,
+	       unsigned long size, unsigned long flags)
+{
+	struct pmb_entry *pmbp;
+	unsigned long wanted;
+	int pmb_flags, i;
+
+	/* Convert typical pgprot value to the PMB equivalent */
+	if (flags & _PAGE_CACHABLE) {
+		if (flags & _PAGE_WT)
+			pmb_flags = PMB_WT;
+		else
+			pmb_flags = PMB_C;
+	} else
+		pmb_flags = PMB_WT | PMB_UB;
+
+	pmbp = NULL;
+	wanted = size;
+
+again:
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
+		struct pmb_entry *pmbe;
+		int ret;
+
+		if (size < pmb_sizes[i].size)
+			continue;
+
+		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
+		if (IS_ERR(pmbe))
+			return PTR_ERR(pmbe);
+
+		ret = set_pmb_entry(pmbe);
+		if (ret != 0) {
+			pmb_free(pmbe);
+			return -EBUSY;
+		}
+
+		phys	+= pmb_sizes[i].size;
+		vaddr	+= pmb_sizes[i].size;
+		size	-= pmb_sizes[i].size;
+
+		/*
+		 * Link adjacent entries that span multiple PMB entries
+		 * for easier tear-down.
+		 */
+		if (likely(pmbp))
+			pmbp->link = pmbe;
+
+		pmbp = pmbe;
+	}
+
+	if (size >= 0x1000000)
+		goto again;
+
+	return wanted - size;
+}
+
+void pmb_unmap(unsigned long addr)
+{
+	struct pmb_entry **p, *pmbe;
+
+	for (p = &pmb_list; (pmbe = *p); p = &pmbe->next)
+		if (pmbe->vpn == addr)
+			break;
+
+	if (unlikely(!pmbe))
+		return;
+
+	WARN_ON(!test_bit(pmbe->entry, &pmb_map));
+
+	do {
+		struct pmb_entry *pmblink = pmbe;
+
+		clear_pmb_entry(pmbe);
+		pmbe = pmblink->link;
+
+		pmb_free(pmblink);
+	} while (pmbe);
+}
+
+static void pmb_cache_ctor(void *pmb, kmem_cache_t *cachep, unsigned long flags)
+{
+	struct pmb_entry *pmbe = pmb;
+
+	memset(pmb, 0, sizeof(struct pmb_entry));
+
+	spin_lock_irq(&pmb_list_lock);
+
+	pmbe->entry = PMB_NO_ENTRY;
+	pmb_list_add(pmbe);
+
+	spin_unlock_irq(&pmb_list_lock);
+}
+
+static void pmb_cache_dtor(void *pmb, kmem_cache_t *cachep, unsigned long flags)
+{
+	spin_lock_irq(&pmb_list_lock);
+	pmb_list_del(pmb);
+	spin_unlock_irq(&pmb_list_lock);
+}
+
+static int __init pmb_init(void)
+{
+	unsigned int nr_entries = ARRAY_SIZE(pmb_init_map);
+	unsigned int entry;
+
+	BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES));
+
+	pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry),
+				      0, 0, pmb_cache_ctor, pmb_cache_dtor);
+	BUG_ON(!pmb_cache);
+
+	jump_to_P2();
+
+	/*
+	 * Ordering is important, P2 must be mapped in the PMB before we
+	 * can set PMB.SE, and P1 must be mapped before we jump back to
+	 * P1 space.
+	 */
+	for (entry = 0; entry < nr_entries; entry++) {
+		struct pmb_entry *pmbe = pmb_init_map + entry;
+
+		__set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry);
+	}
+
+	ctrl_outl(0, PMB_IRMCR);
+
+	/* PMB.SE and UB[7] */
+	ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR);
+
+	back_to_P1();
+
+	return 0;
+}
+arch_initcall(pmb_init);
+
+static int pmb_seq_show(struct seq_file *file, void *iter)
+{
+	int i;
+
+	seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
+			 "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
+	seq_printf(file, "ety   vpn  ppn  size   flags\n");
+
+	for (i = 0; i < NR_PMB_ENTRIES; i++) {
+		unsigned long addr, data;
+		unsigned int size;
+		char *sz_str = NULL;
+
+		addr = ctrl_inl(mk_pmb_addr(i));
+		data = ctrl_inl(mk_pmb_data(i));
+
+		size = data & PMB_SZ_MASK;
+		sz_str = (size == PMB_SZ_16M)  ? " 16MB":
+			 (size == PMB_SZ_64M)  ? " 64MB":
+			 (size == PMB_SZ_128M) ? "128MB":
+					         "512MB";
+
+		/* 02: V 0x88 0x08 128MB C CB  B */
+		seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
+			   i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
+			   (addr >> 24) & 0xff, (data >> 24) & 0xff,
+			   sz_str, (data & PMB_C) ? 'C' : ' ',
+			   (data & PMB_WT) ? "WT" : "CB",
+			   (data & PMB_UB) ? "UB" : " B");
+	}
+
+	return 0;
+}
+
+static int pmb_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmb_seq_show, NULL);
+}
+
+static struct file_operations pmb_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmb_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int __init pmb_debugfs_init(void)
+{
+	struct dentry *dentry;
+
+	dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
+				     NULL, NULL, &pmb_debugfs_fops);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
+
+	return 0;
+}
+postcore_initcall(pmb_debugfs_init);
diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c
new file mode 100644
index 00000000000..73ec7f6084f
--- /dev/null
+++ b/arch/sh/mm/tlb-flush.c
@@ -0,0 +1,134 @@
+/*
+ * TLB flushing operations for SH with an MMU.
+ *
+ *  Copyright (C) 1999  Niibe Yutaka
+ *  Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) {
+		unsigned long flags;
+		unsigned long asid;
+		unsigned long saved_asid = MMU_NO_ASID;
+
+		asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK;
+		page &= PAGE_MASK;
+
+		local_irq_save(flags);
+		if (vma->vm_mm != current->mm) {
+			saved_asid = get_asid();
+			set_asid(asid);
+		}
+		__flush_tlb_page(asid, page);
+		if (saved_asid != MMU_NO_ASID)
+			set_asid(saved_asid);
+		local_irq_restore(flags);
+	}
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		     unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	if (mm->context.id != NO_CONTEXT) {
+		unsigned long flags;
+		int size;
+
+		local_irq_save(flags);
+		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+		if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+			mm->context.id = NO_CONTEXT;
+			if (mm == current->mm)
+				activate_context(mm);
+		} else {
+			unsigned long asid;
+			unsigned long saved_asid = MMU_NO_ASID;
+
+			asid = mm->context.id & MMU_CONTEXT_ASID_MASK;
+			start &= PAGE_MASK;
+			end += (PAGE_SIZE - 1);
+			end &= PAGE_MASK;
+			if (mm != current->mm) {
+				saved_asid = get_asid();
+				set_asid(asid);
+			}
+			while (start < end) {
+				__flush_tlb_page(asid, start);
+				start += PAGE_SIZE;
+			}
+			if (saved_asid != MMU_NO_ASID)
+				set_asid(saved_asid);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+	int size;
+
+	local_irq_save(flags);
+	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+		flush_tlb_all();
+	} else {
+		unsigned long asid;
+		unsigned long saved_asid = get_asid();
+
+		asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK;
+		start &= PAGE_MASK;
+		end += (PAGE_SIZE - 1);
+		end &= PAGE_MASK;
+		set_asid(asid);
+		while (start < end) {
+			__flush_tlb_page(asid, start);
+			start += PAGE_SIZE;
+		}
+		set_asid(saved_asid);
+	}
+	local_irq_restore(flags);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	/* Invalidate all TLB of this process. */
+	/* Instead of invalidating each TLB, we get new MMU context. */
+	if (mm->context.id != NO_CONTEXT) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		mm->context.id = NO_CONTEXT;
+		if (mm == current->mm)
+			activate_context(mm);
+		local_irq_restore(flags);
+	}
+}
+
+void flush_tlb_all(void)
+{
+	unsigned long flags, status;
+
+	/*
+	 * Flush all the TLB.
+	 *
+	 * Write to the MMU control register's bit:
+	 *	TF-bit for SH-3, TI-bit for SH-4.
+	 *      It's same position, bit #2.
+	 */
+	local_irq_save(flags);
+	status = ctrl_inl(MMUCR);
+	status |= 0x04;
+	ctrl_outl(status, MMUCR);
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 115b1b6be40..812b2d567de 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -36,7 +36,6 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	unsigned long vpn;
 	struct page *page;
 	unsigned long pfn;
-	unsigned long ptea;
 
 	/* Ptrace may call this routine. */
 	if (vma && current->active_mm != vma->vm_mm)
@@ -59,10 +58,11 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	ctrl_outl(vpn, MMU_PTEH);
 
 	pteval = pte_val(pte);
+
 	/* Set PTEA register */
-	/* TODO: make this look less hacky */
-	ptea = ((pteval >> 28) & 0xe) | (pteval & 0x1);
-	ctrl_outl(ptea, MMU_PTEA);
+	if (cpu_data->flags & CPU_HAS_PTEA)
+		/* TODO: make this look less hacky */
+		ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
 
 	/* Set PTEL register */
 	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 686738d4aa3..1f25d9bb753 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -7,7 +7,11 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		timer_int.o )
 
 profdrvr-y				:= op_model_null.o
+
+# SH7750-style performance counters exist across 7750/7750S and 7091.
+profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750S)	:= op_model_sh7750.o
 profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750)	:= op_model_sh7750.o
+profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091)	:= op_model_sh7750.o
 
 oprofile-y				:= $(DRIVER_OBJS) $(profdrvr-y)
 
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 182fe909257..ac57638977e 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -8,16 +8,15 @@
 SE			SH_SOLUTION_ENGINE
 7751SE			SH_7751_SOLUTION_ENGINE		
 7300SE			SH_7300_SOLUTION_ENGINE
+7343SE			SH_7343_SOLUTION_ENGINE
 73180SE			SH_73180_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
 HD64461			HD64461
 HD64465			HD64465
-SH2000			SH_SH2000
 SATURN			SH_SATURN
 DREAMCAST		SH_DREAMCAST
 BIGSUR			SH_BIGSUR
-ADX			SH_ADX
 MPC1211			SH_MPC1211
 SNAPGEAR		SH_SECUREEDGE5410
 HS7751RVOIP		SH_HS7751RVOIP
@@ -25,4 +24,9 @@ RTS7751R2D		SH_RTS7751R2D
 EDOSK7705		SH_EDOSK7705
 SH4202_MICRODEV		SH_SH4202_MICRODEV
 SH03			SH_SH03
-
+LANDISK			SH_LANDISK
+R7780RP			SH_R7780RP
+R7780MP			SH_R7780MP
+TITAN			SH_TITAN
+SHMIN			SH_SHMIN
+7710VOIPGW		SH_7710VOIPGW
author	Linus Torvalds <torvalds@g5.osdl.org>	2006-09-27 08:49:07 -0700
committer	Linus Torvalds <torvalds@g5.osdl.org>	2006-09-27 08:49:07 -0700
commit	b98adfccdf5f8dd34ae56a2d5adbe2c030bd4674 (patch)
tree	1807a029520f550dd4f90c95ad0063bceb00d645 /arch
parent	ba21fe71725f94792330ebc3034ef2b35a36276f (diff)
parent	33573c0e3243aaa38b6ad96942de85a1b713c2ff (diff)