PM / OPP: rename functions to dev_pm_opp*

Since Operating Performance Points (OPP) functions are specific to
device specific power management, be specific and rename opp_*
accessors in OPP library with dev_pm_opp_* equivalent.

Affected functions are:
 opp_get_voltage
 opp_get_freq
 opp_get_opp_count
 opp_find_freq_exact
 opp_find_freq_floor
 opp_find_freq_ceil
 opp_add
 opp_enable
 opp_disable
 opp_get_notifier
 opp_init_cpufreq_table
 opp_free_cpufreq_table

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

4 files changed, 9 insertions, 9 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a21087..d7ecc90e6bb 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -226,7 +226,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
-		if (opp_disable(cpu_dev, 1200000000))
+		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
 
 put_node:
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f26918467ef..33969e5a149 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -522,11 +522,11 @@ static int __init beagle_opp_init(void)
 			return -ENODEV;
 		}
 		/* Enable MPU 1GHz and lower opps */
-		r = opp_enable(mpu_dev, 800000000);
+		r = dev_pm_opp_enable(mpu_dev, 800000000);
 		/* TODO: MPU 1GHz needs SR and ABB */
 
 		/* Enable IVA 800MHz and lower opps */
-		r |= opp_enable(iva_dev, 660000000);
+		r |= dev_pm_opp_enable(iva_dev, 660000000);
 		/* TODO: DSP 800MHz needs SR and ABB */
 		if (r) {
 			pr_err("%s: failed to enable higher opp %d\n",
@@ -535,8 +535,8 @@ static int __init beagle_opp_init(void)
 			 * Cleanup - disable the higher freqs - we dont care
 			 * about the results
 			 */
-			opp_disable(mpu_dev, 800000000);
-			opp_disable(iva_dev, 660000000);
+			dev_pm_opp_disable(mpu_dev, 800000000);
+			dev_pm_opp_disable(iva_dev, 660000000);
 		}
 	}
 	return 0;
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index bd41d59a7ca..7b04637b13c 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -81,14 +81,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 			dev = &oh->od->pdev->dev;
 		}
 
-		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+		r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt);
 		if (r) {
 			dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
 				__func__, opp_def->freq,
 				opp_def->hwmod_name, i, r);
 		} else {
 			if (!opp_def->default_available)
-				r = opp_disable(dev, opp_def->freq);
+				r = dev_pm_opp_disable(dev, opp_def->freq);
 			if (r)
 				dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
 					__func__, opp_def->freq,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e742118fcfd..937744c3679 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	clk_put(clk);
 
 	rcu_read_lock();
-	opp = opp_find_freq_ceil(dev, &freq);
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
@@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 		goto exit;
 	}
 
-	bootup_volt = opp_get_voltage(opp);
+	bootup_volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",