diff options
author | Neil Zhang <zhangwm@marvell.com> | 2012-05-03 14:19:13 +0800 |
---|---|---|
committer | Haojian Zhuang <haojian.zhuang@gmail.com> | 2012-05-03 15:05:10 +0800 |
commit | 75b1bdf51c4b5c383296de2df9ad83b1b8dd287f (patch) | |
tree | 9f5c8d852438ac07ddda81696cfa4842a84265bb /arch | |
parent | 1334d86b55d2ec1b50fdcb440c2642ae7a4620ba (diff) |
ARM: mmp: add usb device support for PXA910
Add usb device support for Marvell PXA910.
Actually PXA920 will use the same device.
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-mmp/Kconfig | 7 | ||||
-rw-r--r-- | arch/arm/mach-mmp/devices.c | 282 | ||||
-rw-r--r-- | arch/arm/mach-mmp/include/mach/devices.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-mmp/include/mach/pxa910.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-mmp/include/mach/regs-usb.h | 253 | ||||
-rw-r--r-- | arch/arm/mach-mmp/pxa910.c | 2 |
6 files changed, 549 insertions, 1 deletions
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 5a90b9a3ab6..fa03974fd83 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -113,4 +113,11 @@ config CPU_MMP2 select CPU_PJ4 help Select code specific to MMP2. MMP2 is ARMv7 compatible. + +config USB_EHCI_MV_U2O + bool "EHCI support for PXA USB OTG controller" + depends on USB_EHCI_MV + help + Enables support for OTG controller which can be switched to host mode. + endif diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 191d9dea873..262179f4510 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -9,9 +9,13 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/delay.h> #include <asm/irq.h> +#include <mach/irqs.h> #include <mach/devices.h> +#include <mach/cputype.h> +#include <mach/regs-usb.h> int __init pxa_register_device(struct pxa_device_desc *desc, void *data, size_t size) @@ -67,3 +71,281 @@ int __init pxa_register_device(struct pxa_device_desc *desc, return platform_device_add(pdev); } + +#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET) + +/***************************************************************************** + * The registers read/write routines + *****************************************************************************/ + +static unsigned int u2o_get(void __iomem *base, unsigned int offset) +{ + return readl_relaxed(base + offset); +} + +static void u2o_set(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg |= value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_clear(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_write(void __iomem *base, unsigned int offset, + unsigned int value) +{ + writel_relaxed(value, base + offset); + readl_relaxed(base + offset); +} + +#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV) + +#if defined(CONFIG_CPU_PXA910) + +static DEFINE_MUTEX(phy_lock); +static int phy_init_cnt; + +static int usb_phy_init_internal(void __iomem *base) +{ + int loops; + + pr_info("Init usb phy!!!\n"); + + /* Initialize the USB PHY power */ + if (cpu_is_pxa910()) { + u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT) + | (1<<UTMI_CTRL_PU_REF_SHIFT)); + } + + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + + /* UTMI_PLL settings */ + u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK + | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK + | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK + | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK); + + u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT + | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT + | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT + | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT); + + /* UTMI_TX */ + u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK + | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK + | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK + | UTMI_TX_AMP_MASK); + u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT + | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT + | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT); + + /* UTMI_RX */ + u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK + | UTMI_REG_SQ_LENGTH_MASK); + u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT + | 2<<UTMI_REG_SQ_LENGTH_SHIFT); + + /* UTMI_IVREF */ + if (cpu_is_pxa168()) + /* fixing Microsoft Altair board interface with NEC hub issue - + * Set UTMI_IVREF from 0x4a3 to 0x4bf */ + u2o_write(base, UTMI_IVREF, 0x4bf); + + /* toggle VCOCAL_START bit of UTMI_PLL */ + udelay(200); + u2o_set(base, UTMI_PLL, VCOCAL_START); + udelay(40); + u2o_clear(base, UTMI_PLL, VCOCAL_START); + + /* toggle REG_RCAL_START bit of UTMI_TX */ + udelay(400); + u2o_set(base, UTMI_TX, REG_RCAL_START); + udelay(40); + u2o_clear(base, UTMI_TX, REG_RCAL_START); + udelay(400); + + /* Make sure PHY PLL is ready */ + loops = 0; + while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) { + mdelay(1); + loops++; + if (loops > 100) { + printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n", + u2o_get(base, UTMI_PLL)); + break; + } + } + + if (cpu_is_pxa168()) { + u2o_set(base, UTMI_RESERVE, 1 << 5); + /* Turn on UTMI PHY OTG extension */ + u2o_write(base, UTMI_OTG_ADDON, 1); + } + + return 0; +} + +static int usb_phy_deinit_internal(void __iomem *base) +{ + pr_info("Deinit usb phy!!!\n"); + + if (cpu_is_pxa168()) + u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON); + + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + + return 0; +} + +int pxa_usb_phy_init(void __iomem *phy_reg) +{ + mutex_lock(&phy_lock); + if (phy_init_cnt++ == 0) + usb_phy_init_internal(phy_reg); + mutex_unlock(&phy_lock); + return 0; +} + +void pxa_usb_phy_deinit(void __iomem *phy_reg) +{ + WARN_ON(phy_init_cnt == 0); + + mutex_lock(&phy_lock); + if (--phy_init_cnt == 0) + usb_phy_deinit_internal(phy_reg); + mutex_unlock(&phy_lock); +} +#endif +#endif +#endif + +#ifdef CONFIG_USB_SUPPORT +static u64 usb_dma_mask = ~(u32)0; + +#ifdef CONFIG_USB_MV_UDC +struct resource pxa168_u2o_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2o = { + .name = "mv-udc", + .id = -1, + .resource = pxa168_u2o_resources, + .num_resources = ARRAY_SIZE(pxa168_u2o_resources), + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + } +}; +#endif /* CONFIG_USB_MV_UDC */ + +#ifdef CONFIG_USB_EHCI_MV_U2O +struct resource pxa168_u2oehci_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2oehci = { + .name = "pxa-u2oehci", + .id = -1, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + + .num_resources = ARRAY_SIZE(pxa168_u2oehci_resources), + .resource = pxa168_u2oehci_resources, +}; +#endif + +#if defined(CONFIG_USB_MV_OTG) +struct resource pxa168_u2ootg_resources[] = { + /* regbase */ + [0] = { + .start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET, + .end = PXA168_U2O_REGBASE + USB_REG_RANGE, + .flags = IORESOURCE_MEM, + .name = "capregs", + }, + /* phybase */ + [1] = { + .start = PXA168_U2O_PHYBASE, + .end = PXA168_U2O_PHYBASE + USB_PHY_RANGE, + .flags = IORESOURCE_MEM, + .name = "phyregs", + }, + [2] = { + .start = IRQ_PXA168_USB1, + .end = IRQ_PXA168_USB1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa168_device_u2ootg = { + .name = "mv-otg", + .id = -1, + .dev = { + .dma_mask = &usb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + + .num_resources = ARRAY_SIZE(pxa168_u2ootg_resources), + .resource = pxa168_u2ootg_resources, +}; +#endif /* CONFIG_USB_MV_OTG */ + +#endif diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h index d0ec7dae88e..21217ef11b6 100644 --- a/arch/arm/mach-mmp/include/mach/devices.h +++ b/arch/arm/mach-mmp/include/mach/devices.h @@ -50,4 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = { \ } extern int pxa_register_device(struct pxa_device_desc *, void *, size_t); +extern int pxa_usb_phy_init(void __iomem *phy_reg); +extern void pxa_usb_phy_deinit(void __iomem *phy_reg); + #endif /* __MACH_DEVICE_H */ diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h index e2e1f1e5e12..793634c837e 100644 --- a/arch/arm/mach-mmp/include/mach/pxa910.h +++ b/arch/arm/mach-mmp/include/mach/pxa910.h @@ -20,6 +20,9 @@ extern struct pxa_device_desc pxa910_device_pwm2; extern struct pxa_device_desc pxa910_device_pwm3; extern struct pxa_device_desc pxa910_device_pwm4; extern struct pxa_device_desc pxa910_device_nand; +extern struct platform_device pxa168_device_u2o; +extern struct platform_device pxa168_device_u2ootg; +extern struct platform_device pxa168_device_u2oehci; extern struct platform_device pxa910_device_gpio; extern struct platform_device pxa910_device_rtc; diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/include/mach/regs-usb.h new file mode 100644 index 00000000000..b047bf48750 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-usb.h @@ -0,0 +1,253 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_REGS_USB_H +#define __ASM_ARCH_REGS_USB_H + +#define PXA168_U2O_REGBASE (0xd4208000) +#define PXA168_U2O_PHYBASE (0xd4207000) + +#define PXA168_U2H_REGBASE (0xd4209000) +#define PXA168_U2H_PHYBASE (0xd4206000) + +#define MMP3_HSIC1_REGBASE (0xf0001000) +#define MMP3_HSIC1_PHYBASE (0xf0001800) + +#define MMP3_HSIC2_REGBASE (0xf0002000) +#define MMP3_HSIC2_PHYBASE (0xf0002800) + +#define MMP3_FSIC_REGBASE (0xf0003000) +#define MMP3_FSIC_PHYBASE (0xf0003800) + + +#define USB_REG_RANGE (0x1ff) +#define USB_PHY_RANGE (0xff) + +/* registers */ +#define U2x_CAPREGS_OFFSET 0x100 + +/* phy regs */ +#define UTMI_REVISION 0x0 +#define UTMI_CTRL 0x4 +#define UTMI_PLL 0x8 +#define UTMI_TX 0xc +#define UTMI_RX 0x10 +#define UTMI_IVREF 0x14 +#define UTMI_T0 0x18 +#define UTMI_T1 0x1c +#define UTMI_T2 0x20 +#define UTMI_T3 0x24 +#define UTMI_T4 0x28 +#define UTMI_T5 0x2c +#define UTMI_RESERVE 0x30 +#define UTMI_USB_INT 0x34 +#define UTMI_DBG_CTL 0x38 +#define UTMI_OTG_ADDON 0x3c + +/* For UTMICTRL Register */ +#define UTMI_CTRL_USB_CLK_EN (1 << 31) +/* pxa168 */ +#define UTMI_CTRL_SUSPEND_SET1 (1 << 30) +#define UTMI_CTRL_SUSPEND_SET2 (1 << 29) +#define UTMI_CTRL_RXBUF_PDWN (1 << 24) +#define UTMI_CTRL_TXBUF_PDWN (1 << 11) + +#define UTMI_CTRL_INPKT_DELAY_SHIFT 30 +#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 +#define UTMI_CTRL_PU_REF_SHIFT 20 +#define UTMI_CTRL_ARC_PULLDN_SHIFT 12 +#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 +#define UTMI_CTRL_PWR_UP_SHIFT 0 + +/* For UTMI_PLL Register */ +#define UTMI_PLL_PLLCALI12_SHIFT 29 +#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) + +#define UTMI_PLL_PLLVDD18_SHIFT 27 +#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) + +#define UTMI_PLL_PLLVDD12_SHIFT 25 +#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) + +#define UTMI_PLL_CLK_BLK_EN_SHIFT 24 +#define CLK_BLK_EN (0x1 << 24) +#define PLL_READY (0x1 << 23) +#define KVCO_EXT (0x1 << 22) +#define VCOCAL_START (0x1 << 21) + +#define UTMI_PLL_KVCO_SHIFT 15 +#define UTMI_PLL_KVCO_MASK (0x7 << 15) + +#define UTMI_PLL_ICP_SHIFT 12 +#define UTMI_PLL_ICP_MASK (0x7 << 12) + +#define UTMI_PLL_FBDIV_SHIFT 4 +#define UTMI_PLL_FBDIV_MASK (0xFF << 4) + +#define UTMI_PLL_REFDIV_SHIFT 0 +#define UTMI_PLL_REFDIV_MASK (0xF << 0) + +/* For UTMI_TX Register */ +#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 +#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) + +#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 +#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) + +#define UTMI_TX_TXVDD12_SHIFT 22 +#define UTMI_TX_TXVDD12_MASK (0x3 << 22) + +#define UTMI_TX_CK60_PHSEL_SHIFT 17 +#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) + +#define UTMI_TX_IMPCAL_VTH_SHIFT 14 +#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) + +#define REG_RCAL_START (0x1 << 12) + +#define UTMI_TX_LOW_VDD_EN_SHIFT 11 + +#define UTMI_TX_AMP_SHIFT 0 +#define UTMI_TX_AMP_MASK (0x7 << 0) + +/* For UTMI_RX Register */ +#define UTMI_REG_SQ_LENGTH_SHIFT 15 +#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) + +#define UTMI_RX_SQ_THRESH_SHIFT 4 +#define UTMI_RX_SQ_THRESH_MASK (0xf << 4) + +#define UTMI_OTG_ADDON_OTG_ON (1 << 0) + +/* For MMP3 USB Phy */ +#define USB2_PLL_REG0 0x4 +#define USB2_PLL_REG1 0x8 +#define USB2_TX_REG0 0x10 +#define USB2_TX_REG1 0x14 +#define USB2_TX_REG2 0x18 +#define USB2_RX_REG0 0x20 +#define USB2_RX_REG1 0x24 +#define USB2_RX_REG2 0x28 +#define USB2_ANA_REG0 0x30 +#define USB2_ANA_REG1 0x34 +#define USB2_ANA_REG2 0x38 +#define USB2_DIG_REG0 0x3C +#define USB2_DIG_REG1 0x40 +#define USB2_DIG_REG2 0x44 +#define USB2_DIG_REG3 0x48 +#define USB2_TEST_REG0 0x4C +#define USB2_TEST_REG1 0x50 +#define USB2_TEST_REG2 0x54 +#define USB2_CHARGER_REG0 0x58 +#define USB2_OTG_REG0 0x5C +#define USB2_PHY_MON0 0x60 +#define USB2_RESETVE_REG0 0x64 +#define USB2_ICID_REG0 0x78 +#define USB2_ICID_REG1 0x7C + +/* USB2_PLL_REG0 */ +/* This is for Ax stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3 0 +#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) + +#define USB2_PLL_REFDIV_SHIFT_MMP3 8 +#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) + +#define USB2_PLL_VDD12_SHIFT_MMP3 12 +#define USB2_PLL_VDD18_SHIFT_MMP3 14 + +/* This is for B0 stepping */ +#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 +#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 +#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 +#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF +#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 + +#define USB2_PLL_CAL12_SHIFT_MMP3 0 +#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) + +#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 + +#define USB2_PLL_KVCO_SHIFT_MMP3 4 +#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) + +#define USB2_PLL_ICP_SHIFT_MMP3 8 +#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) + +#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 + +#define USB2_PLL_PU_PLL_SHIFT_MMP3 13 +#define USB2_PLL_PU_PLL_MASK (0x1 << 13) + +#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) + +/* USB2_TX_REG0 */ +#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 +#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) + +#define USB2_TX_RCAL_START_SHIFT_MMP3 13 + +/* USB2_TX_REG1 */ +#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 +#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) + +#define USB2_TX_AMP_SHIFT_MMP3 4 +#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) + +#define USB2_TX_VDD12_SHIFT_MMP3 8 +#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) + +/* USB2_TX_REG2 */ +#define USB2_TX_DRV_SLEWRATE_SHIFT 10 + +/* USB2_RX_REG0 */ +#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 +#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) + +#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 +#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) + +/* USB2_ANA_REG1*/ +#define USB2_ANA_PU_ANA_SHIFT_MMP3 14 + +/* USB2_OTG_REG0 */ +#define USB2_OTG_PU_OTG_SHIFT_MMP3 3 + +/* fsic registers */ +#define FSIC_MISC 0x4 +#define FSIC_INT 0x28 +#define FSIC_CTRL 0x30 + +/* HSIC registers */ +#define HSIC_PAD_CTRL 0x4 + +#define HSIC_CTRL 0x8 +#define HSIC_CTRL_HSIC_ENABLE (1<<7) +#define HSIC_CTRL_PLL_BYPASS (1<<4) + +#define TEST_GRP_0 0xc +#define TEST_GRP_1 0x10 + +#define HSIC_INT 0x14 +#define HSIC_INT_READY_INT_EN (1<<10) +#define HSIC_INT_CONNECT_INT_EN (1<<9) +#define HSIC_INT_CORE_INT_EN (1<<8) +#define HSIC_INT_HS_READY (1<<2) +#define HSIC_INT_CONNECT (1<<1) +#define HSIC_INT_CORE (1<<0) + +#define HSIC_CONFIG 0x18 +#define USBHSIC_CTRL 0x20 + +#define HSIC_USB_CTRL 0x28 +#define HSIC_USB_CTRL_CLKEN 1 +#define HSIC_USB_CLK_PHY 0x0 +#define HSIC_USB_CLK_PMU 0x1 + +#endif /* __ASM_ARCH_PXA_U2O_H */ diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 43f8bcc29b6..6da52e9f2bd 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -109,7 +109,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"), + INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; |