Merge tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "Lots of isolated bug fixes that were not found to be important enough
  to be submitted before the merge window or backported into stable
  kernels.

  The vast majority of these came out of Arnd's randconfig testing and
  just prevents running into build-time bugs in configurations that we
  do not care about in practice"

* tag 'fixes-non-critical-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: at91: fix a typo
  ARM: moxart: fix CPU selection
  ARM: tegra: fix board DT pinmux setup
  ARM: nspire: Fix compiler warning
  IXP4xx: Fix DMA masks.
  Revert "ARM: ixp4xx: Make dma_set_coherent_mask common, correct implementation"
  IXP4xx: Fix Goramo Multilink GPIO conversion.
  Revert "ARM: ixp4xx: fix gpio rework"
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ...

74 files changed, 343 insertions, 263 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6b4ac5de6de..79bea0b34d1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -423,6 +423,7 @@ config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on !MMU
 	select ARCH_REQUIRE_GPIOLIB
+	select AUTO_ZRELADDR
 	select ARM_NVIC
 	# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
 	# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
@@ -698,6 +699,7 @@ config ARCH_RPC
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
@@ -732,6 +734,7 @@ config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
@@ -754,6 +757,7 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK
@@ -765,7 +769,7 @@ config ARCH_S3C64XX
 	select HAVE_TCM
 	select NO_IOPORT
 	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
@@ -776,6 +780,7 @@ config ARCH_S3C64XX
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
@@ -794,6 +799,7 @@ config ARCH_S5P64X0
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -813,6 +819,7 @@ config ARCH_S5PV210
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -886,6 +893,12 @@ menu "Multiple platform selection"
 
 comment "CPU Core family selection"
 
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526
+
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6d95d3df33c..79087ccf64b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -448,7 +448,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			usb_ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10620 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -551,7 +551,7 @@
 					"tx14", "tx15";
 			};
 
-			cppi41dma: dma-controller@07402000 {
+			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
 				reg =  <0x47400000 0x1000
 					0x47402000 0x1000
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index b42e658876e..457112d659e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -287,6 +287,7 @@
 					regulator-name = "vdd_g3d";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>;
 				};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e8ca2..69409f7e05d 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -275,6 +275,8 @@
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
 			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
 		};
 
 		uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a9663..7a16647c76f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -302,6 +302,8 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
 		};
 
 		i2c1: i2c@48070000 {
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 73aecfb57cc..eb54353975b 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -715,7 +715,6 @@
 				nvidia,pins = "drive_sdio1";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <36>;
 				nvidia,pull-up-strength = <20>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
@@ -725,7 +724,6 @@
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <22>;
 				nvidia,pull-up-strength = <36>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index c6dcef513e5..0b54743c262 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -138,14 +138,9 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0",
-					      "sdmmc1_cmd_pz1",
-					      "sdmmc1_dat0_py7",
-					      "sdmmc1_dat1_py6",
-					      "sdmmc1_dat2_py5",
-					      "sdmmc1_dat3_py4";
+				nvidia,pins = "sdmmc1_clk_pz0";
 				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -423,7 +418,6 @@
 				nvidia,pins = "drive_sdio1";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <32>;
 				nvidia,pull-up-strength = <42>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -433,7 +427,6 @@
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
 				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
 				nvidia,pull-down-strength = <20>;
 				nvidia,pull-up-strength = <36>;
 				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ab2f7378352..932b932c885 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -198,3 +198,5 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index dbe1f1c47bb..4ce7b70ea90 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -94,7 +94,7 @@ CONFIG_FONT_7x14=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_PHY=y
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b5d4a..4157aec4e30 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,6 +74,7 @@ struct secondary_data {
 };
 extern struct secondary_data secondary_data;
 extern volatile int pen_release;
+extern void secondary_startup(void);
 
 extern int __cpu_disable(void);
 
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index f98763f0bc1..3bc80599c02 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -53,8 +53,7 @@
 
 #define checkuart(rp, rv, lhu, bit, uart) \
 		/* Load address of CLK_RST register */ \
-		movw	rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
 		/* Load value from CLK_RST register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's reset bit */ \
@@ -62,8 +61,7 @@
 		/* If set, can't use UART; jump to save no UART */ \
 		bne	90f ; \
 		/* Load address of CLK_OUT_ENB register */ \
-		movw	rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
 		/* Load value from CLK_OUT_ENB register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's clock enable bit */ \
@@ -71,8 +69,7 @@
 		/* If clear, can't use UART; jump to save no UART */ \
 		beq	90f ; \
 		/* Passed all tests, load address of UART registers */ \
-		movw	rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
-		movt	rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+		ldr	rp, =TEGRA_UART##uart##_BASE ; \
 		/* Jump to save UART address */ \
 		b 91f
 
@@ -90,15 +87,16 @@
 
 #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
 		/* Check ODMDATA */
-10:		movw	\rp, #TEGRA_PMC_SCRATCH20 & 0xffff
-		movt	\rp, #TEGRA_PMC_SCRATCH20 >> 16
+10:		ldr	\rp, =TEGRA_PMC_SCRATCH20
 		ldr	\rp, [\rp, #0]		@ Load PMC_SCRATCH20
-		ubfx	\rv, \rp, #18, #2	@ 19:18 are console type
+		lsr	\rv, \rp, #18		@ 19:18 are console type
+		and	\rv, \rv, #3
 		cmp	\rv, #2			@ 2 and 3 mean DCC, UART
 		beq	11f			@ some boards swap the meaning
 		cmp	\rv, #3			@ so accept either
 		bne	90f
-11:		ubfx	\rv, \rp, #15, #3	@ 17:15 are UART ID
+11:		lsr	\rv, \rp, #15		@ 17:15 are UART ID
+		and	\rv, #7	
 		cmp	\rv, #0			@ UART 0?
 		beq	20f
 		cmp	\rv, #1			@ UART 1?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f0e800e7e7..9968f208b7d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -57,6 +57,7 @@ config SOC_SAMA5
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select USE_OF
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -64,11 +65,22 @@ choice
 
 	prompt "Core type"
 
+config ARCH_AT91X40
+	bool "ARM7 AT91X40"
+	depends on !MMU
+	select CPU_ARM7TDMI
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+	help
+	  Select this if you are using one of Atmel's AT91X40 SoC.
+
 config SOC_SAM_V4_V5
-	bool "ARM7/ARM9"
+	bool "ARM9 AT91SAM9/AT91RM9200"
 	help
-	  Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
-	  or AT91X40 SoC.
+	  Select this if you are using one of Atmel's AT91SAM9 or
+	  AT91RM9200 SoC.
 
 config SOC_SAM_V7
 	bool "Cortex A5"
@@ -179,9 +191,12 @@ config SOC_AT91SAM9N12
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
 # ----------------------------------------------------------
+endif # SOC_SAM_V4_V5
+
 
+if SOC_SAM_V4_V5 || ARCH_AT91X40
 source arch/arm/mach-at91/Kconfig.non_dt
-endif # SOC_SAM_V4_V5
+endif
 
 comment "Generic Board Type"
 
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 1f73e9b527d..44ace320d2e 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD
 
 choice
 	prompt "Atmel AT91 Processor Devices for non DT boards"
+	depends on !ARCH_AT91X40
 
 config ARCH_AT91_NONE
 	bool "None"
@@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45
 	select SOC_AT91SAM9G45
 	select AT91_USE_OLD_CLK
 
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
 endchoice
 
 config ARCH_AT91SAM9G20
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index eda8d1679d4..1630ae64d3f 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1255,12 +1255,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
 	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
 
-	if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+	if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE))
 		pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
 	else
 		pdev->name = "at91_cf";
 
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index b26156bf15d..826315af6d1 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs,
 {
 	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
 
 static void sam9_smc_cs_configure(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs,
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
 
 static void sam9_smc_cs_read_mode(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs,
 {
 	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
 
 static void sam9_smc_cs_read(void __iomem *base,
 					struct sam9_smc_config *config)
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7ca97b7291..f7a07a58ebb 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic("Impossible to ioremap at91_matrix_base\n");
 }
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
 static struct of_device_id rstc_ids[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index f8d71a89644..5f831133178 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -73,7 +73,7 @@
 #define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
 #define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
 #define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
-#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 3)
+#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
 
 /* LCD contrast digital potentiometer */
 #define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index ce096d678aa..d863d8729ed 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -246,7 +246,6 @@ static void __init cns3420_map_io(void)
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 384dc859e6c..2ae28a69e3e 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -47,6 +47,38 @@ static struct map_desc cns3xxx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+#ifdef CONFIG_PCI
+	}, {
+		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
+		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE0_CFG1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_HOST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
+		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PCIE1_CFG1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE,
+#endif
 	},
 };
 
@@ -368,7 +400,6 @@ static const char *cns3xxx_dt_compat[] __initdata = {
 
 DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
 	.dt_compat	= cns3xxx_dt_compat,
-	.nr_irqs	= NR_IRQS_CNS3XXX,
 	.map_io		= cns3xxx_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.init_time	= cns3xxx_timer_init,
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index c7b204bff38..413134c5445 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -23,15 +23,10 @@
 #include "cns3xxx.h"
 #include "core.h"
 
-enum cns3xxx_access_type {
-	CNS3XXX_HOST_TYPE = 0,
-	CNS3XXX_CFG0_TYPE,
-	CNS3XXX_CFG1_TYPE,
-	CNS3XXX_NUM_ACCESS_TYPES,
-};
-
 struct cns3xxx_pcie {
-	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
+	void __iomem *host_regs; /* PCI config registers for host bridge */
+	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
+	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
 	unsigned int irqs[2];
 	struct resource res_io;
 	struct resource res_mem;
@@ -66,7 +61,6 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
 	int busno = bus->number;
 	int slot = PCI_SLOT(devfn);
 	int offset;
-	enum cns3xxx_access_type type;
 	void __iomem *base;
 
 	/* If there is no link, just show the CNS PCI bridge. */
@@ -78,17 +72,21 @@ static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
 	 * we still want to access it. For this to work, we must place
 	 * the first device on the same bus as the CNS PCI bridge.
 	 */
-	if (busno == 0) {
-		if (slot > 1)
-			return NULL;
-		type = slot;
-	} else {
-		type = CNS3XXX_CFG1_TYPE;
-	}
+	if (busno == 0) { /* directly connected PCIe bus */
+		switch (slot) {
+		case 0: /* host bridge device, function 0 only */
+			base = cnspci->host_regs;
+			break;
+		case 1: /* directly connected device */
+			base = cnspci->cfg0_regs;
+			break;
+		default:
+			return NULL; /* no such device */
+		}
+	} else /* remote PCI bus */
+		base = cnspci->cfg1_regs;
 
-	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
 	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
-
 	return base + offset;
 }
 
@@ -180,36 +178,19 @@ static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static struct cns3xxx_pcie cns3xxx_pcie[] = {
 	[0] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
+		.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
+		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
 		.res_io = {
 			.name = "PCIe0 I/O space",
 			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
 			.flags = IORESOURCE_IO,
 		},
 		.res_mem = {
 			.name = "PCIe0 non-prefetchable",
 			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
 			.flags = IORESOURCE_MEM,
 		},
 		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
@@ -222,36 +203,19 @@ static struct cns3xxx_pcie cns3xxx_pcie[] = {
 		},
 	},
 	[1] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
+		.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
+		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
 		.res_io = {
 			.name = "PCIe1 I/O space",
 			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
 			.flags = IORESOURCE_IO,
 		},
 		.res_mem = {
 			.name = "PCIe1 non-prefetchable",
 			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
+			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
 			.flags = IORESOURCE_MEM,
 		},
 		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
@@ -307,18 +271,15 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 		.ops = &cns3xxx_pcie_ops,
 		.sysdata = &sd,
 	};
-	u32 io_base = cnspci->res_io.start >> 16;
-	u32 mem_base = cnspci->res_mem.start >> 16;
-	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
-	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
+	u16 mem_base  = cnspci->res_mem.start >> 16;
+	u16 mem_limit = cnspci->res_mem.end   >> 16;
+	u16 io_base   = cnspci->res_io.start  >> 16;
+	u16 io_limit  = cnspci->res_io.end    >> 16;
 	u32 devfn = 0;
 	u8 tmp8;
 	u16 pos;
 	u16 dc;
 
-	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
-	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
-
 	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
 	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
 	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
@@ -328,9 +289,9 @@ static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
 
 	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
 	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
 
 	if (!cnspci->linked)
 		return;
@@ -368,8 +329,6 @@ static int __init cns3xxx_pcie_init(void)
 			"imprecise external abort");
 
 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		iotable_init(cns3xxx_pcie[i].cfg_bases,
-			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
 		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
 		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
 		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a075b3e0c5c..626d2b82d0f 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -214,11 +214,6 @@ config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
 
 config MACH_TNETV107X
 	bool "TI TNETV107X Reference Platform"
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 987605b7855..3de4dc9a169 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -799,11 +799,12 @@ static __init void davinci_evm_init(void)
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
 
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+		/* Register the fixup for PHY on DaVinci */
+		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+						davinci_phy_fixup);
+	}
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 157ba88433c..fd021ba539f 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -242,6 +242,7 @@ unsigned int ep93xx_chip_revision(void)
 	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
 	return v;
 }
+EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
 
 /*************************************************************************
  * EP93xx GPIO
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index f18be40e5b2..8d0042c9d4d 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -404,8 +404,10 @@ static int __init exynos4_l2x0_cache_init(void)
 	if (ret)
 		return ret;
 
-	l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-	clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+	if (IS_ENABLED(CONFIG_S5P_SLEEP)) {
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+	}
 	return 0;
 }
 early_initcall(exynos4_l2x0_cache_init);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index f57cb91f02a..93d2decc112 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -14,6 +14,7 @@
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/time.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index fba55fb9f47..07152d00fc5 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA
+	select ARCH_MAY_HAVE_PC_FDC
 	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the EBSA285 card
@@ -94,6 +95,5 @@ config FOOTBRIDGE_ADDIN
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
-	select ARCH_MAY_HAVE_PC_FDC
 
 endif
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0b64dd430d6..c3faa3bc84d 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
-obj-y			:= common.o dc21285.o dma.o isa-irq.o
+obj-y			:= common.o dma.o isa-irq.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
+pci-y			+= dc21285.o
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 9669cc0b631..da041509485 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -78,9 +78,11 @@ __initcall(cats_hw_init);
 static void __init
 fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
 {
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 	screen_info.orig_video_lines  = 25;
 	screen_info.orig_video_points = 16;
 	screen_info.orig_y = 24;
+#endif
 }
 
 MACHINE_START(CATS, "Chalice-CATS")
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index 6870058d0a4..2ae1b59267c 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -3,5 +3,4 @@
 #
 
 obj-y	+= hisilicon.o
-obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+obj-$(CONFIG_SMP)		+= platsmp.o hotplug.o
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index b909854eee7..abd441b0c60 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -178,6 +178,7 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 void hi3xxx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
@@ -198,3 +199,4 @@ int hi3xxx_cpu_kill(unsigned int cpu)
 	hi3xxx_set_cpu(cpu, false);
 	return 1;
 }
+#endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index abeff25532a..271a255864d 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
 	select MIGHT_HAVE_PCI
-	select SERIAL_AMBA_PL010
-	select SERIAL_AMBA_PL010_CONSOLE
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator/AP and
@@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP
 	select ARCH_CINTEGRATOR
 	select ARM_TIMER_SP804
 	select PLAT_VERSATILE_CLCD
-	select SERIAL_AMBA_PL011
-	select SERIAL_AMBA_PL011_CONSOLE
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 200970d56f6..4977296f0c7 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -315,33 +315,6 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r
 	return 0;
 }
 
-
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) >= SZ_64M;
-}
-
-/*
- * Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
- */
-static int ixp4xx_pci_platform_notify(struct device *dev)
-{
-	if (dev_is_pci(dev)) {
-		*dev->dma_mask =  SZ_64M - 1;
-		dev->coherent_dma_mask = SZ_64M - 1;
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-	}
-	return 0;
-}
-
-static int ixp4xx_pci_platform_notify_remove(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-
 void __init ixp4xx_pci_preinit(void)
 {
 	unsigned long cpuid = read_cpuid_id();
@@ -475,20 +448,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
-	platform_notify = ixp4xx_pci_platform_notify;
-	platform_notify_remove = ixp4xx_pci_platform_notify_remove;
-
 	return 1;
 }
 
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
-EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index a465f27bc26..be882c95bd3 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -30,8 +30,8 @@
 #include <linux/export.h>
 #include <linux/gpio.h>
 #include <linux/cpu.h>
+#include <linux/pci.h>
 #include <linux/sched_clock.h>
-
 #include <mach/udc.h>
 #include <mach/hardware.h>
 #include <mach/io.h>
@@ -40,7 +40,6 @@
 #include <asm/page.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
-
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
@@ -578,6 +577,54 @@ void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
 	}
 }
 
+#ifdef CONFIG_PCI
+static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	return (dma_addr + size) > SZ_64M;
+}
+
+static int ixp4xx_platform_notify_remove(struct device *dev)
+{
+	if (dev_is_pci(dev))
+		dmabounce_unregister_dev(dev);
+
+	return 0;
+}
+#endif
+
+/*
+ * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
+ */
+static int ixp4xx_platform_notify(struct device *dev)
+{
+	dev->dma_mask = &dev->coherent_dma_mask;
+
+#ifdef CONFIG_PCI
+	if (dev_is_pci(dev)) {
+		dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
+		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
+		return 0;
+	}
+#endif
+
+	dev->coherent_dma_mask = DMA_BIT_MASK(32);
+	return 0;
+}
+
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (dev_is_pci(dev))
+		mask &= DMA_BIT_MASK(28); /* 64 MB */
+
+	if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
+		dev->coherent_dma_mask = mask;
+		return 0;
+	}
+
+	return -EIO;		/* device wanted sub-64MB mask */
+}
+EXPORT_SYMBOL(dma_set_coherent_mask);
+
 #ifdef CONFIG_IXP4XX_INDIRECT_PCI
 /*
  * In the case of using indirect PCI, we simply return the actual PCI
@@ -600,12 +647,16 @@ static void ixp4xx_iounmap(void __iomem *addr)
 	if (!is_pci_memory((__force u32)addr))
 		__iounmap(addr);
 }
+#endif
 
 void __init ixp4xx_init_early(void)
 {
+	platform_notify = ixp4xx_platform_notify;
+#ifdef CONFIG_PCI
+	platform_notify_remove = ixp4xx_platform_notify_remove;
+#endif
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
 	arch_ioremap_caller = ixp4xx_ioremap_caller;
 	arch_iounmap = ixp4xx_iounmap;
-}
-#else
-void __init ixp4xx_init_early(void) {}
 #endif
+}
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index e54ff491c10..80bd9d6d04d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/hdlc.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
@@ -79,19 +80,19 @@ static u8 control_value;
 
 static void set_scl(u8 value)
 {
-	gpio_line_set(GPIO_SCL, !!value);
+	gpio_set_value(GPIO_SCL, !!value);
 	udelay(3);
 }
 
 static void set_sda(u8 value)
 {
-	gpio_line_set(GPIO_SDA, !!value);
+	gpio_set_value(GPIO_SDA, !!value);
 	udelay(3);
 }
 
 static void set_str(u8 value)
 {
-	gpio_line_set(GPIO_STR, !!value);
+	gpio_set_value(GPIO_STR, !!value);
 	udelay(3);
 }
 
@@ -108,8 +109,8 @@ static void output_control(void)
 {
 	int i;
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
 
 	for (i = 0; i < 8; i++) {
 		set_scl(0);
@@ -151,8 +152,8 @@ static int hss_set_clock(int port, unsigned int clock_type)
 
 static irqreturn_t hss_dcd_irq(int irq, void *pdev)
 {
-	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
+	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb_tab[port](pdev, !i);
 	return IRQ_HANDLED;
 }
@@ -168,7 +169,7 @@ static int hss_open(int port, void *pdev,
 	else
 		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
 
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
 	set_carrier_cb(pdev, !i);
 
 	set_carrier_cb_tab[!!port] = set_carrier_cb;
@@ -181,7 +182,7 @@ static int hss_open(int port, void *pdev,
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
 	return 0;
 }
 
@@ -193,7 +194,7 @@ static void hss_close(int port, void *pdev)
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
 	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
 }
 
 
@@ -413,13 +414,21 @@ static void __init gmlr_init(void)
 	if (hw_bits & CFG_HW_HAS_EEPROM)
 		device_tab[devices++] = &device_i2c; /* max index 6 */
 
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
-	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+	gpio_request(GPIO_SCL, "SCL/clock");
+	gpio_request(GPIO_SDA, "SDA/data");
+	gpio_request(GPIO_STR, "strobe");
+	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
+	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
+	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
+	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
+
+	gpio_direction_output(GPIO_SCL, 1);
+	gpio_direction_output(GPIO_SDA, 1);
+	gpio_direction_output(GPIO_STR, 0);
+	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
+	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
+	gpio_direction_input(GPIO_HSS0_DCD_N);
+	gpio_direction_input(GPIO_HSS1_DCD_N);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 5cf30d1b78d..559c69a4773 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -48,9 +48,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
  * fallback to the default.
  */
 
+extern unsigned long pcibios_min_mem;
 static inline int is_pci_memory(u32 addr)
 {
-	return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
+	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
 }
 
 #define writeb(v, p)			__indirect_writeb(v, p)
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 75ef03dc996..2d494b45437 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -17,9 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#ifdef CONFIG_LEDS_CLASS
 #include <linux/leds.h>
-#endif
 
 #include <asm/setup.h>
 #include <asm/memory.h>
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 002bc619bb6..f2658168eef 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -44,7 +44,8 @@ static void __init og_register_pci(void)
 	if (machine_is_im4004())
 		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
 
-	ks8695_init_pci(&og_pci);
+	if (IS_ENABLED(CONFIG_PCI))
+		ks8695_init_pci(&og_pci);
 }
 
 /*
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index d7aa54c25c5..de03620d7fa 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -99,6 +99,7 @@ u32 lpc32xx_return_iram_size(void)
 
 	return iram_size;
 }
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
 
 /*
  * Computes PLL rate from PLL register and input clock
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 0c002099c3a..7e0248582ef 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -231,7 +231,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.debounce_interval	= 30,
 };
 
-#if defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_EHCI_MV)
 static struct mv_usb_platform_data pxa168_sph_pdata = {
 	.mode           = MV_USB_MODE_HOST,
 	.phy_init	= pxa_usb_phy_init,
@@ -258,7 +258,7 @@ static void __init common_init(void)
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
 
-#if defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_EHCI_MV)
 	pxa168_add_usb_host(&pxa168_sph_pdata);
 #endif
 }
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index dd2d8b103cc..2bcb766af05 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -72,7 +72,7 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 	return platform_device_add(pdev);
 }
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +112,9 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
 
-#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;
@@ -238,10 +238,10 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #endif
 #endif
 
-#ifdef CONFIG_USB_SUPPORT
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
 static u64 usb_dma_mask = ~(u32)0;
 
-#ifdef CONFIG_USB_MV_UDC
+#if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
 	/* regbase */
 	[0] = {
@@ -276,7 +276,7 @@ struct platform_device pxa168_device_u2o = {
 };
 #endif /* CONFIG_USB_MV_UDC */
 
-#ifdef CONFIG_USB_EHCI_MV_U2O
+#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 struct resource pxa168_u2oehci_resources[] = {
 	/* regbase */
 	[0] = {
@@ -312,7 +312,7 @@ struct platform_device pxa168_device_u2oehci = {
 };
 #endif
 
-#if defined(CONFIG_USB_MV_OTG)
+#if IS_ENABLED(CONFIG_USB_MV_OTG)
 struct resource pxa168_u2ootg_resources[] = {
 	/* regbase */
 	[0] = {
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index cfadd974f5c..ac4af81de3e 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -164,8 +164,8 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
 	},
 };
 
-#ifdef CONFIG_USB_SUPPORT
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 
 static struct mv_usb_platform_data ttc_usb_pdata = {
 	.vbus		= NULL,
@@ -178,14 +178,14 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
 #endif
 #endif
 
-#ifdef CONFIG_MTD_NAND_PXA3xx
+#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
 static struct pxa3xx_nand_platform_data dkb_nand_info = {
 	.enable_arbiter = 1,
 	.num_cs = 1,
 };
 #endif
 
-#ifdef CONFIG_MMP_DISP
+#if IS_ENABLED(CONFIG_MMP_DISP)
 /* path config */
 #define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
 #define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
@@ -275,7 +275,7 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
-#ifdef CONFIG_MTD_NAND_PXA3xx
+#if IS_ENABLED(CONFIG_MTD_NAND_PXA3xx)
 	pxa910_add_nand(&dkb_nand_info);
 #endif
 
@@ -285,22 +285,22 @@ static void __init ttc_dkb_init(void)
 				 sizeof(struct pxa_gpio_platform_data));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 
-#ifdef CONFIG_USB_MV_UDC
+#if IS_ENABLED(CONFIG_USB_MV_UDC)
 	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2o);
 #endif
 
-#ifdef CONFIG_USB_EHCI_MV_U2O
+#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2oehci);
 #endif
 
-#ifdef CONFIG_USB_MV_OTG
+#if IS_ENABLED(CONFIG_USB_MV_OTG)
 	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2ootg);
 #endif
 
-#ifdef CONFIG_MMP_DISP
+#if IS_ENABLED(CONFIG_MMP_DISP)
 	add_disp();
 #endif
 }
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 3795ae28a61..e9b45bb5826 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,5 +1,5 @@
 config ARCH_MOXART
-	bool "MOXA ART SoC" if ARCH_MULTI_V4T
+	bool "MOXA ART SoC" if ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select USE_OF
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index f8f6adfa07c..fb976246471 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/completion.h>
+#include <linux/module.h>
 #include <mach/dma.h>
 #include <mach/msm_iomap.h>
 
@@ -77,6 +78,7 @@ void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
 {
 	writel((graceful << 31), DMOV_FLUSH0(id));
 }
+EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 {
@@ -115,6 +117,7 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 	}
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 }
+EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
 
 struct msm_dmov_exec_cmdptr_cmd {
 	struct msm_dmov_cmd dmov_cmd;
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index adc8971c726..34e09474636 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -78,8 +78,10 @@ void __init msm_map_common_io(void)
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
 		defined(CONFIG_DEBUG_MSM_UART3)
+#ifdef CONFIG_MMU
 	debug_ll_addr(&msm_io_desc[size - 1].pfn,
 		      &msm_io_desc[size - 1].virtual);
+#endif
 	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
 #endif
 	iotable_init(msm_io_desc, size);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index f6c9d1d85c1..5b793ebb0a2 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -21,6 +21,7 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
+#include <linux/signal.h>
 #include <linux/slab.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 4b2ed2e8352..3d24ebf1209 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -63,7 +63,7 @@ static void __init nspire_init(void)
 			nspire_auxdata, NULL);
 }
 
-static void nspire_restart(char mode, const char *cmd)
+static void nspire_restart(enum reboot_mode mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
 	if (!base)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fd90cafc2e3..65d2acb3149 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -318,6 +318,9 @@ static void __init h2_init_smc91x(void)
 
 static int tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+	
 	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
 				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index d68909b095f..3a0262156e9 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = {
 
 static int osk_tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+
 	/* Set GPIO 1 HIGH to disable VBUS power supply;
 	 * OHCI driver powers it up/down as needed.
 	 */
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 40a1ae31961..dbee729e3b6 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
-#ifdef CONFIG_OMAP_32K_TIMER
+#ifndef CONFIG_OMAP_32K_TIMER
+
+static unsigned short enable_dyn_sleep = 0;
+
+#else
 
 static unsigned short enable_dyn_sleep = 1;
 
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index e022a869bff..6037a9a01ed 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -222,6 +222,7 @@ void __init ti81xx_init_irq(void)
 static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
 {
 	u32 irqnr;
+	int handled_irq = 0;
 
 	do {
 		irqnr = readl_relaxed(base_addr + 0x98);
@@ -249,8 +250,15 @@ out:
 		if (irqnr) {
 			irqnr = irq_find_mapping(domain, irqnr);
 			handle_IRQ(irqnr, regs);
+			handled_irq = 1;
 		}
 	} while (irqnr);
+
+	/* If an irq is masked or deasserted while active, we will
+	 * keep ending up here with no irq handled. So remove it from
+	 * the INTC with an ack.*/
+	if (!handled_irq)
+		omap_ack_irq(NULL);
 }
 
 asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 3318cae96e7..1219280bb97 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2541,8 +2541,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 7bdd22afce6..d4d0fce325c 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -103,7 +103,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 
 #define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD	(1 << 0)
 
-#if defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
 extern u16 pm44xx_errata;
 #define IS_PM44XX_ERRATUM(id)		(pm44xx_errata & (id))
 #else
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2cb2f06c20f..14f2cae4109 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -33,7 +33,6 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
-	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 70974732cbf..56edeab17b6 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -642,6 +642,8 @@ static void __init dns323_init(void)
 		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
 
 		/* Register fixup for the PHY LEDs */
+		if (!IS_BUILTIN(CONFIG_PHYLIB))
+			break;
 		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
 					   MARVELL_PHY_ID_MASK,
 					   dns323c_phy_fixup);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96100dbf5a2..a280cc42636 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -53,12 +53,16 @@ config MACH_TAVOREVB
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -69,8 +73,7 @@ config ARCH_PXA_IDP
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
 	select ARCOM_PCMCIA
-	select HAVE_PWM
-	select I2C_GPIO
+	select I2C_GPIO if I2C=y
 	select ISA
 	select PXA25x
 	select PXA_HAVE_ISA_IRQS
@@ -164,7 +167,6 @@ config MACH_XCEP
 	select MTD_CFI_INTELEXT
 	select MTD_PHYSMAP
 	select PXA25x
-	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 	  Tuned for usage in Libera instruments for particle accelerators.
@@ -181,6 +183,7 @@ config MACH_TRIZEPS4
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
+	select MACH_TRIZEPS4
 	select PXA27x
 	select TRIZEPS_PCMCIA
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2f71b3fbd31..43596e0ed05 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -331,7 +331,6 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
 static void __init balloon3_udc_init(void)
 {
 	pxa_set_udc_info(&balloon3_udc_info);
-	platform_device_register(&balloon3_gpio_vbus);
 }
 #else
 static inline void balloon3_udc_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 8404b24240e..638b0bb8842 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,6 +20,7 @@
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <asm/io.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2022e092f0c..db09170e383 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -56,6 +56,8 @@
 #define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
 #define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
 
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
 #define __phys_to_virt(phys)						\
 	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
 	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431d64c..f2727f2cc66 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -537,7 +537,7 @@ config MACH_AT2440EVB
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
-	select EEPROM_AT24
+	select EEPROM_AT24 if I2C
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_BACKLIGHT
@@ -573,7 +573,7 @@ config MACH_OSIRIS
 config MACH_OSIRIS_DVS
 	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
 	depends on MACH_OSIRIS
-	select TPS65010
+	depends on TPS65010
 	help
 	  Say Y/M here if you want to have dynamic voltage scaling support
 	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 4adaa4b43ff..1d77d709ec2 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -484,7 +484,7 @@ struct platform_device s3c2440_device_dma = {
 };
 #endif
 
-#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
 static struct resource s3c2443_dma_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
 	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index d9170e9f8cc..ee7bb2905a9 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -196,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work)
 	 * If the PCF50633 ADC is disabled we fallback to a
 	 * 100mA limit for safety.
 	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
+	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
 #endif
 }
 
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 64f04e6f9c3..3136d86b0d6 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -86,8 +86,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
+	select S3C_DEV_HSMMC1
 	help
 	  Machine support for the Samsung SMDK6400
 
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 1649c0d1c1b..ddf65583a5d 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -55,7 +55,13 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[5];
 
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define	SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
 
 static int s3c64xx_irq_pm_suspend(void)
 {
@@ -66,7 +72,7 @@ static int s3c64xx_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
@@ -87,7 +93,7 @@ static void s3c64xx_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7ccfef227c7..9c00d83f715 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -401,4 +401,4 @@ static int __init wlf_gf_module_register(void)
 {
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
-module_init(wlf_gf_module_register);
+device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 42e14f2e7ca..f07edc304ef 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -205,6 +205,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
@@ -218,7 +219,9 @@ void __init s5p6440_map_io(void)
 
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
@@ -232,13 +235,14 @@ void __init s5p6450_map_io(void)
 
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
 }
+#endif
 
 /*
  * s5p64x0_init_clocks
  *
  * register and setup the CPU clocks
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -248,7 +252,9 @@ void __init s5p6440_init_clocks(int xtal)
 	s5p6440_register_clocks();
 	s5p6440_setup_clocks();
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -258,13 +264,14 @@ void __init s5p6450_init_clocks(int xtal)
 	s5p6450_register_clocks();
 	s5p6450_setup_clocks();
 }
+#endif
 
 /*
  * s5p64x0_init_irq
  *
  * register the CPU interrupts
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_irq(void)
 {
 	/* S5P6440 supports 2 VIC */
@@ -279,7 +286,9 @@ void __init s5p6440_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_irq(void)
 {
 	/* S5P6450 supports only 2 VIC */
@@ -294,6 +303,7 @@ void __init s5p6450_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
 struct bus_type s5p64x0_subsys = {
 	.name		= "s5p64x0-core",
@@ -321,6 +331,7 @@ int __init s5p64x0_init(void)
 }
 
 /* uart registration process */
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	int uart;
@@ -332,11 +343,14 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
index f3a9b43cba4..cbe7f3d731d 100644
--- a/arch/arm/mach-s5p64x0/common.h
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -25,10 +25,10 @@ void s5p6450_register_clocks(void);
 void s5p6450_setup_clocks(void);
 
 void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
+extern  int s5p64x0_init(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p64x0_init(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
@@ -38,12 +38,10 @@ extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #ifdef CONFIG_CPU_S5P6450
 
-extern  int s5p64x0_init(void);
 extern void s5p6450_map_io(void);
 extern void s5p6450_init_clocks(int xtal);
 
@@ -53,7 +51,6 @@ extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6450_init_clocks NULL
 #define s5p6450_init_uarts NULL
 #define s5p6450_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
index 3e6f2456ee9..d5f0fd66b63 100644
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -34,7 +34,9 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[4];
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 static int s5p64x0_irq_pm_suspend(void)
 {
@@ -45,8 +47,10 @@ static int s5p64x0_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
@@ -66,8 +70,10 @@ static void s5p64x0_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index caaedafbbf5..8c3abe52175 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -189,6 +189,7 @@ config MACH_TORBRECK
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_SDHCI
+	select SAMSUNG_DEV_IDE
 	help
 	  Machine support for aESOP Torbreck
 
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d9397202d6e..27b168f121a 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
deleted file mode 100644
index a10d494fb37..00000000000
--- a/arch/arm/mach-sunxi/headsmp.S
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-        .section ".text.head", "ax"
-
-ENTRY(sun6i_secondary_startup)
-	msr	cpsr_fsxc, #0xd3
-	b	secondary_startup
-ENDPROC(sun6i_secondary_startup)
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index 7b141d8342a..0c7dbce033c 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -82,7 +82,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	spin_lock(&cpu_lock);
 
 	/* Set CPU boot address */
-	writel(virt_to_phys(sun6i_secondary_startup),
+	writel(virt_to_phys(secondary_startup),
 	       cpucfg_membase + CPUCFG_PRIVATE0_REG);
 
 	/* Assert the CPU core in reset */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index ca8ecdee47d..241622e2fea 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -264,7 +264,7 @@ config CPU_ARM1026
 
 # SA110
 config CPU_SA110
-	bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
+	bool
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 58645a58d0d..b57e922f161 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -427,8 +427,7 @@ comment "Power management"
 
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	select DEBUG_LL
+	depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -445,7 +444,8 @@ config S3C_PM_DEBUG_LED_SMDK
 
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
+	depends on PM
+	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option
 	  will generate CRCs of all blocks of memory, and store them before
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index aa9511b6914..a30df396ca3 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -97,7 +97,9 @@ void __init s3c24xx_init_clocks(int xtal)
 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
 
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 /* s3c24xx_init_uartdevs
  *
@@ -112,6 +114,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no)
 {
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 	struct platform_device *platdev;
 	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
 	struct s3c24xx_uart_resources *resp;
@@ -134,6 +137,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 	}
 
 	nr_uarts = no;
+#endif
 }
 
 void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)