diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-25 12:43:28 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-07-25 12:43:28 -0700 |
| commit | 4b478cedcdc1b2d131170f22bd3f916e53472f52 (patch) | |
| tree | 4a458a850d99fe3e2768fc62b2e3761c85ea05c2 /arch | |
| parent | ae4c42e4e4d76d003f8ca551fe1aef93ff9a4b21 (diff) | |
| parent | c8b7d43b6d539218c36f0ac8a6ad434b93195703 (diff) | |
Merge branch 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/deletion' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
ARM: mach-loki: delete
ARM: mach-s3c2400: delete
ARM: mach-s3c24a0: delete
Diffstat (limited to 'arch')
49 files changed, 4 insertions, 1892 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ebaa380fde2..9cb1f4bd761 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -493,14 +493,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_LOKI - bool "Marvell Loki (88RC8480)" - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select PLAT_ORION - help - Support for the Marvell Loki (88RC8480) SoC. - config ARCH_LPC32XX bool "NXP LPC32XX" select CLKSRC_MMIO @@ -937,8 +929,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-loki/Kconfig" - source "arch/arm/mach-lpc32xx/Kconfig" source "arch/arm/mach-msm/Kconfig" @@ -982,7 +972,6 @@ source "arch/arm/plat-spear/Kconfig" source "arch/arm/plat-tcc/Kconfig" if ARCH_S3C2410 -source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2416/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f5b2b390c8f..206c34ecb9e 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,7 +150,6 @@ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 -machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm @@ -172,8 +171,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 -machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig deleted file mode 100644 index 1ba752b2dc6..00000000000 --- a/arch/arm/configs/loki_defconfig +++ /dev/null @@ -1,120 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_LOKI=y -CONFIG_MACH_LB88RC8480=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ORION=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_ATA=y -CONFIG_SATA_MV=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -CONFIG_SPI=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_NEW_LEDS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_XFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig deleted file mode 100644 index 0045bdd761c..00000000000 --- a/arch/arm/mach-loki/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if ARCH_LOKI - -menu "Marvell Loki (88RC8480) Implementations" - -config MACH_LB88RC8480 - bool "Marvell LB88RC8480 Development Board" - help - Say 'Y' here if you want your kernel to support the - Marvell LB88RC8480 Development Board. - -endmenu - -endif diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile deleted file mode 100644 index d43233ee590..00000000000 --- a/arch/arm/mach-loki/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y += common.o addr-map.o irq.o - -obj-$(CONFIG_MACH_LB88RC8480) += lb88rc8480-setup.o diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-loki/Makefile.boot deleted file mode 100644 index 67039c3e0c4..00000000000 --- a/arch/arm/mach-loki/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c deleted file mode 100644 index b9537c97beb..00000000000 --- a/arch/arm/mach-loki/addr-map.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-loki/addr-map.c - * - * Address map functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_DEV_BUS 1 -#define TARGET_PCIE0 3 -#define TARGET_PCIE1 4 -#define ATTR_DEV_BOOT 0x0f -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS0 0x1e -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCIE_MEM 0x59 - -/* - * Helpers to get DDR bank info - */ -#define DDR_SIZE_CS(n) DDR_REG(0x1500 + ((n) << 3)) -#define DDR_BASE_CS(n) DDR_REG(0x1504 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) BRIDGE_REG(0x00c | ((n) << 4)) - - -struct mbus_dram_target_info loki_mbus_dram_info; - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target; - - writel(base, CPU_WIN_BASE(win)); - writel(ctrl, CPU_WIN_CTRL(win)); - if (win < 2) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); - writel(0, CPU_WIN_REMAP_HI(win)); - } -} - -void __init loki_setup_cpu_mbus(void) -{ - int i; - int cs; - - /* - * First, disable and clear windows. - */ - for (i = 0; i < 8; i++) { - writel(0, CPU_WIN_BASE(i)); - writel(0, CPU_WIN_CTRL(i)); - if (i < 2) { - writel(0, CPU_WIN_REMAP_LO(i)); - writel(0, CPU_WIN_REMAP_HI(i)); - } - } - - /* - * Setup windows for PCIe IO+MEM space. - */ - setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1); - - /* - * Setup MBUS dram target info. - */ - loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(DDR_BASE_CS(i)); - u32 size = readl(DDR_SIZE_CS(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &loki_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - loki_mbus_dram_info.num_cs = cs; -} - -void __init loki_setup_dev_boot_win(u32 base, u32 size) -{ - setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); -} diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c deleted file mode 100644 index 5f02664db81..00000000000 --- a/arch/arm/mach-loki/common.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * arch/arm/mach-loki/common.c - * - * Core functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/mbus.h> -#include <linux/dma-mapping.h> -#include <asm/page.h> -#include <asm/timex.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <mach/bridge-regs.h> -#include <mach/loki.h> -#include <plat/orion_nand.h> -#include <plat/time.h> -#include <plat/common.h> -#include "common.h" - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc loki_io_desc[] __initdata = { - { - .virtual = LOKI_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(LOKI_REGS_PHYS_BASE), - .length = LOKI_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init loki_map_io(void) -{ - iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc)); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) -{ - writel(0x00079220, GE0_VIRT_BASE + 0x20b0); - - orion_ge00_init(eth_data, &loki_mbus_dram_info, - GE0_PHYS_BASE, IRQ_LOKI_GBE_A_INT, - 0, LOKI_TCLK); -} - - -/***************************************************************************** - * GE01 - ****************************************************************************/ -void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) -{ - writel(0x00079220, GE1_VIRT_BASE + 0x20b0); - - orion_ge01_init(eth_data, &loki_mbus_dram_info, - GE1_PHYS_BASE, IRQ_LOKI_GBE_B_INT, - 0, LOKI_TCLK); -} - - -/***************************************************************************** - * SAS/SATA - ****************************************************************************/ -static struct resource loki_sas_resources[] = { - { - .name = "mvsas0 mem", - .start = SAS0_PHYS_BASE, - .end = SAS0_PHYS_BASE + 0x01ff, - .flags = IORESOURCE_MEM, - }, { - .name = "mvsas0 irq", - .start = IRQ_LOKI_SAS_A, - .end = IRQ_LOKI_SAS_A, - .flags = IORESOURCE_IRQ, - }, { - .name = "mvsas1 mem", - .start = SAS1_PHYS_BASE, - .end = SAS1_PHYS_BASE + 0x01ff, - .flags = IORESOURCE_MEM, - }, { - .name = "mvsas1 irq", - .start = IRQ_LOKI_SAS_B, - .end = IRQ_LOKI_SAS_B, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_sas = { - .name = "mvsas", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(loki_sas_resources), - .resource = loki_sas_resources, -}; - -void __init loki_sas_init(void) -{ - writel(0x8300f707, DDR_REG(0x1424)); - platform_device_register(&loki_sas); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ -void __init loki_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_LOKI_UART0, LOKI_TCLK); -} - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init loki_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_LOKI_UART1, LOKI_TCLK); -} - - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init loki_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); -} - -static void loki_timer_init(void) -{ - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_LOKI_BRIDGE, LOKI_TCLK); -} - -struct sys_timer loki_timer = { - .init = loki_timer_init, -}; - - -/***************************************************************************** - * General - ****************************************************************************/ -void __init loki_init(void) -{ - printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK); - - loki_setup_cpu_mbus(); -} diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h deleted file mode 100644 index a315dcf8887..00000000000 --- a/arch/arm/mach-loki/common.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-loki/common.h - * - * Core functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_LOKI_COMMON_H -#define __ARCH_LOKI_COMMON_H - -struct mv643xx_eth_platform_data; - -/* - * Basic Loki init functions used early by machine-setup. - */ -void loki_map_io(void); -void loki_init(void); -void loki_init_early(void); -void loki_init_irq(void); - -extern struct mbus_dram_target_info loki_mbus_dram_info; -void loki_setup_cpu_mbus(void); -void loki_setup_dev_boot_win(u32 base, u32 size); - -void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data); -void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data); -void loki_sas_init(void); -void loki_uart0_init(void); -void loki_uart1_init(void); - -extern struct sys_timer loki_timer; - - -#endif diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h deleted file mode 100644 index fd87732097c..00000000000 --- a/arch/arm/mach-loki/include/mach/bridge-regs.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/bridge-regs.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include <mach/loki.h> - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_INT_TIMER1_CLR 0x0004 - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -#endif diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S deleted file mode 100644 index cc90d99ac76..00000000000 --- a/arch/arm/mach-loki/include/mach/debug-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/loki.h> - - .macro addruart, rp, rv - ldr \rp, =LOKI_REGS_PHYS_BASE - ldr \rv, =LOKI_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S deleted file mode 100644 index bc917ed3a62..00000000000 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #IRQ_CAUSE_OFF] - ldr \tmp, [\base, #IRQ_MASK_OFF] - mov \irqnr, #0 - ands \irqstat, \irqstat, \tmp - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h deleted file mode 100644 index d7bfc8f1772..00000000000 --- a/arch/arm/mach-loki/include/mach/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "loki.h" - - -#endif diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h deleted file mode 100644 index a373cd582c8..00000000000 --- a/arch/arm/mach-loki/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "loki.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE) - + LOKI_PCIE0_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h deleted file mode 100644 index 9fbd3326867..00000000000 --- a/arch/arm/mach-loki/include/mach/irqs.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/irqs.h - * - * IRQ definitions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "loki.h" /* need GPIO_MAX */ - -/* - * Interrupt Controller - */ -#define IRQ_LOKI_PCIE_A_CPU_DRBL 0 -#define IRQ_LOKI_CPU_PCIE_A_DRBL 1 -#define IRQ_LOKI_PCIE_B_CPU_DRBL 2 -#define IRQ_LOKI_CPU_PCIE_B_DRBL 3 -#define IRQ_LOKI_COM_A_ERR 6 -#define IRQ_LOKI_COM_A_IN 7 -#define IRQ_LOKI_COM_A_OUT 8 -#define IRQ_LOKI_COM_B_ERR 9 -#define IRQ_LOKI_COM_B_IN 10 -#define IRQ_LOKI_COM_B_OUT 11 -#define IRQ_LOKI_DMA_A 12 -#define IRQ_LOKI_DMA_B 13 -#define IRQ_LOKI_SAS_A 14 -#define IRQ_LOKI_SAS_B 15 -#define IRQ_LOKI_DDR 16 -#define IRQ_LOKI_XOR 17 -#define IRQ_LOKI_BRIDGE 18 -#define IRQ_LOKI_PCIE_A_ERR 20 -#define IRQ_LOKI_PCIE_A_INT 21 -#define IRQ_LOKI_PCIE_B_ERR 22 -#define IRQ_LOKI_PCIE_B_INT 23 -#define IRQ_LOKI_GBE_A_INT 24 -#define IRQ_LOKI_GBE_B_INT 25 -#define IRQ_LOKI_DEV_ERR 26 -#define IRQ_LOKI_UART0 27 -#define IRQ_LOKI_UART1 28 -#define IRQ_LOKI_TWSI 29 -#define IRQ_LOKI_GPIO_23_0 30 -#define IRQ_LOKI_GPIO_25_24 31 - -/* - * Loki General Purpose Pins - */ -#define IRQ_LOKI_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h deleted file mode 100644 index bfca7c265f4..00000000000 --- a/arch/arm/mach-loki/include/mach/loki.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/loki.h - * - * Generic definitions for Marvell Loki (88RC8480) SoC flavors - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_LOKI_H -#define __ASM_ARCH_LOKI_H - -/* - * Marvell Loki (88RC8480) address maps. - * - * phys - * d0000000 on-chip peripheral registers - * e0000000 PCIe 0 Memory space - * e8000000 PCIe 1 Memory space - * f0000000 PCIe 0 I/O space - * f0100000 PCIe 1 I/O space - * - * virt phys size - * fed00000 d0000000 1M on-chip peripheral registers - * fee00000 f0000000 64K PCIe 0 I/O space - * fef00000 f0100000 64K PCIe 1 I/O space - */ - -#define LOKI_REGS_PHYS_BASE 0xd0000000 -#define LOKI_REGS_VIRT_BASE 0xfed00000 -#define LOKI_REGS_SIZE SZ_1M - -#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000 -#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000 -#define LOKI_PCIE0_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE0_IO_SIZE SZ_64K - -#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000 -#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000 -#define LOKI_PCIE1_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE1_IO_SIZE SZ_64K - -#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000 -#define LOKI_PCIE0_MEM_SIZE SZ_128M - -#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define LOKI_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) - -#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) - -#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000) - -#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000) - -#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000) - -#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000) -#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000) - -#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000) -#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000) - -#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000) -#define DDR_REG(x) (DDR_VIRT_BASE | (x)) - - -#define GPIO_MAX 8 - - -#endif diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h deleted file mode 100644 index 66366657a87..00000000000 --- a/arch/arm/mach-loki/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h deleted file mode 100644 index 71895199a53..00000000000 --- a/arch/arm/mach-loki/include/mach/system.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/bridge-regs.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h deleted file mode 100644 index 9df21091529..00000000000 --- a/arch/arm/mach-loki/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define LOKI_TCLK 180000000 diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h deleted file mode 100644 index 90b2a7e65da..00000000000 --- a/arch/arm/mach-loki/include/mach/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/serial_reg.h> -#include <mach/loki.h> - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h deleted file mode 100644 index 5dcbd865443..00000000000 --- a/arch/arm/mach-loki/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c deleted file mode 100644 index 76b211bfcca..00000000000 --- a/arch/arm/mach-loki/irq.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-loki/irq.c - * - * Marvell Loki (88RC8480) IRQ handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/bridge-regs.h> -#include <plat/irq.h> -#include "common.h" - -void __init loki_init_irq(void) -{ - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF)); -} diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c deleted file mode 100644 index 35eae4e6abb..00000000000 --- a/arch/arm/mach-loki/lb88rc8480-setup.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/arm/mach-loki/lb88rc8480-setup.c - * - * Marvell LB88RC8480 Development Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/timer.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/loki.h> -#include "common.h" - -#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000 -#define LB88RC8480_FLASH_BOOT_CS_SIZE SZ_128M - -#define LB88RC8480_NOR_BOOT_BASE 0xff000000 -#define LB88RC8480_NOR_BOOT_SIZE SZ_16M - -static struct mtd_partition lb88rc8480_boot_flash_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = SZ_2M, - }, { - .name = "root-fs", - .offset = SZ_2M, - .size = (SZ_8M + SZ_4M + SZ_1M), - }, { - .name = "u-boot", - .offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M), - .size = SZ_1M, - }, -}; - -static struct physmap_flash_data lb88rc8480_boot_flash_data = { - .parts = lb88rc8480_boot_flash_parts, - .nr_parts = ARRAY_SIZE(lb88rc8480_boot_flash_parts), - .width = 1, /* 8 bit bus width */ -}; - -static struct resource lb88rc8480_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = LB88RC8480_NOR_BOOT_BASE, - .end = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device lb88rc8480_boot_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &lb88rc8480_boot_flash_data, - }, - .num_resources = 1, - .resource = &lb88rc8480_boot_flash_resource, -}; - -static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), - .mac_addr = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 }, -}; - -static void __init lb88rc8480_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - loki_init(); - - loki_ge0_init(&lb88rc8480_ge0_data); - loki_sas_init(); - loki_uart0_init(); - loki_uart1_init(); - - loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE, - LB88RC8480_FLASH_BOOT_CS_SIZE); - platform_device_register(&lb88rc8480_boot_flash); -} - -MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board") - /* Maintainer: Ke Wei <kewei@marvell.com> */ - .boot_params = 0x00000100, - .init_machine = lb88rc8480_init, - .map_io = loki_map_io, - .init_early = loki_init_early, - .init_irq = loki_init_irq, - .timer = &loki_timer, -MACHINE_END diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig deleted file mode 100644 index fdd8f5e96fa..00000000000 --- a/arch/arm/mach-s3c2400/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -menu "S3C2400 Machines" - -endmenu diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile deleted file mode 100644 index 7e23f4e1376..00000000000 --- a/arch/arm/mach-s3c2400/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# arch/arm/mach-s3c2400/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2400) += gpio.o - -# Machine support - diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c deleted file mode 100644 index 6c68e78f359..00000000000 --- a/arch/arm/mach-s3c2400/gpio.c +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c2400/gpio.c - * - * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> - * - * S3C2400 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2400_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7)) - return -EINVAL; /* not valid interrupts */ - - return (pin - S3C2410_GPE(0)) + IRQ_EINT0; -} - -EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h deleted file mode 100644 index 3fd889200e9..00000000000 --- a/arch/arm/mach-s3c2400/include/mach/map.h +++ /dev/null @@ -1,66 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/map.h - * - * Copyright 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright 2003, Lucas Correia Villa Real - * - * S3C2400 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C2400_PA_MEMCTRL (0x14000000) -#define S3C2400_PA_USBHOST (0x14200000) -#define S3C2400_PA_IRQ (0x14400000) -#define S3C2400_PA_DMA (0x14600000) -#define S3C2400_PA_CLKPWR (0x14800000) -#define S3C2400_PA_LCD (0x14A00000) -#define S3C2400_PA_UART (0x15000000) -#define S3C2400_PA_TIMER (0x15100000) -#define S3C2400_PA_USBDEV (0x15200140) -#define S3C2400_PA_WATCHDOG (0x15300000) -#define S3C2400_PA_IIC (0x15400000) -#define S3C2400_PA_IIS (0x15508000) -#define S3C2400_PA_GPIO (0x15600000) -#define S3C2400_PA_RTC (0x15700040) -#define S3C2400_PA_ADC (0x15800000) -#define S3C2400_PA_SPI (0x15900000) - -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - -/* physical addresses of all the chip-select areas */ - -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index f453c4f2cb8..bab13920176 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - /* s3c2410_gpio_irqfilter * * set the irq filtering on the given pin diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index a0a89d42929..cac1ad6b582 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -16,11 +16,7 @@ #include <mach/gpio-nrs.h> -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_MISCCR S3C2400_MISCCR -#else #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ /* general configuration options */ @@ -42,67 +38,33 @@ /* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output * 1 makes port special function, this is default */ #define S3C2410_GPACON S3C2410_GPIOREG(0x00) #define S3C2410_GPADAT S3C2410_GPIOREG(0x04) -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - #define S3C2410_GPA0_ADDR0 (1<<0) - #define S3C2410_GPA1_ADDR16 (1<<1) - #define S3C2410_GPA2_ADDR17 (1<<2) - #define S3C2410_GPA3_ADDR18 (1<<3) - #define S3C2410_GPA4_ADDR19 (1<<4) - #define S3C2410_GPA5_ADDR20 (1<<5) - #define S3C2410_GPA6_ADDR21 (1<<6) - #define S3C2410_GPA7_ADDR22 (1<<7) - #define S3C2410_GPA8_ADDR23 (1<<8) - #define S3C2410_GPA9_ADDR24 (1<<9) - #define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - #define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - #define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - #define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - #define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - #define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - #define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - #define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - #define S3C2410_GPA18_ALE (1<<18) - #define S3C2410_GPA19_nFWE (1<<19) - #define S3C2410_GPA20_nFRE (1<<20) - #define S3C2410_GPA21_nRSTOUT (1<<21) - #define S3C2410_GPA22_nFCE (1<<22) /* 0x08 and 0x0c are reserved on S3C2410 */ @@ -111,10 +73,6 @@ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. * 00 = input, 01 = output, 10=special function, 11=reserved - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - * bit 0,1 = pin 0, 2,3= pin 1... * * CPBUP = pull up resistor control, 1=disabled, 0=enabled @@ -124,78 +82,35 @@ #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) #define S3C2410_GPBUP S3C2410_GPIOREG(0x18) -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ #define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) #define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) #define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) #define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) #define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) #define S3C2410_GPB5_nXBACK (0x02 << 10) #define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) #define S3C2410_GPB6_nXBREQ (0x02 << 12) #define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) #define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) #define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) #define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) #define S3C2410_GPB_PUPDIS(x) (1<<(x)) @@ -208,59 +123,22 @@ #define S3C2410_GPCCON S3C2410_GPIOREG(0x20) #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) #define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - #define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - #define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - #define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - #define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - #define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - #define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - #define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - #define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - #define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - #define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - #define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - #define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - #define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - #define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - #define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - #define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - #define S3C2410_GPC_PUPDIS(x) (1<<(x)) /* @@ -269,8 +147,6 @@ * almost identical setup to port b, but the special functions are mostly * to do with the video system's data. * - * S3C2400: Port D consists of 11 GPIO/Special function - * * almost identical setup to port c */ @@ -278,46 +154,31 @@ #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) #define S3C2410_GPDUP S3C2410_GPIOREG(0x38) -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - #define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) #define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) #define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) #define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) #define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) #define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) #define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) #define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) #define S3C2440_GPD8_SPIMISO1 (0x03 << 16) #define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) #define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) #define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) #define S3C2440_GPD10_SPICLK1 (0x03 << 20) #define S3C2410_GPD11_VD19 (0x02 << 22) @@ -340,9 +201,6 @@ * again, the same as port B, but dealing with I2S, SDI, and * more miscellaneous functions * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * * GPIO / interrupt inputs */ @@ -350,74 +208,51 @@ #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) #define S3C2410_GPEUP S3C2410_GPIOREG(0x48) -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - #define S3C2410_GPE0_I2SLRCK (0x02 << 0) #define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) #define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) #define S3C2410_GPE2_CDCLK (0x02 << 4) #define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) #define S3C2410_GPE3_I2SSDI (0x02 << 6) #define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) #define S3C2410_GPE4_I2SSDO (0x02 << 8) #define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) #define S3C2410_GPE5_SDCLK (0x02 << 10) #define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) #define S3C2443_GPE5_AC_BITCLK (0x03 << 10) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) #define S3C2443_GPE6_AC_SDI (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) #define S3C2443_GPE7_AC_SDO (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) #define S3C2443_GPE8_AC_SYNC (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) #define S3C2443_GPE9_AC_nRESET (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) @@ -447,9 +282,6 @@ * * pull up works like all other ports. * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * * GPIO/serial/misc pins */ @@ -457,37 +289,14 @@ #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) #define S3C2410_GPFUP S3C2410_GPIOREG(0x58) -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - #define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - #define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - #define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - #define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - #define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - #define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - #define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - #define S3C2410_GPF7_EINT7 (0x02 << 14) - #define S3C2410_GPF_PUPDIS(x) (1<<(x)) /* S3C2410: @@ -497,62 +306,38 @@ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function */ #define S3C2410_GPGCON S3C2410_GPIOREG(0x60) #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) #define S3C2410_GPGUP S3C2410_GPIOREG(0x68) -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - #define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) #define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) #define S3C2410_GPG2_EINT10 (0x02 << 4) #define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3_EINT11 (0x02 << 6) #define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) #define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2443_GPG4_LCDPWRDN (0x03 << 8) #define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ #define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) #define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) #define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) #define S3C2410_GPG10_EINT18 (0x02 << 20) @@ -660,7 +445,6 @@ #define S3C2443_GPMUP S3C2410_GPIOREG(0x108) /* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) @@ -674,14 +458,6 @@ #define S3C2410_MISCCR_SPUCR_LEN (0<<1) #define S3C2410_MISCCR_SPUCR_LDIS (1<<1) -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - #define S3C2410_MISCCR_USBDEV (0<<3) #define S3C2410_MISCCR_USBHOST (1<<3) @@ -728,7 +504,6 @@ * * Samsung datasheet p9-25 */ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) @@ -796,22 +571,6 @@ #define S3C2410_GSTATUS2_OFFRESET (1<<1) #define S3C2410_GSTATUS2_PONRESET (1<<0) -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - /* 2412/2413 sleep configuration registers */ #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 988a6863e54..e0c67b0163d 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -145,29 +145,8 @@ #define S3C2410_BANKCON_Tacs_SHIFT (13) #define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) #define S3C2410_BANKCON_SDRAM (0x3 << 15) -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - /* next bits only for SDRAM in 6,7 */ #define S3C2410_BANKCON_Trcd2 (0x00 << 2) #define S3C2410_BANKCON_Trcd3 (0x01 << 2) @@ -194,12 +173,6 @@ #define S3C2410_REFRESH_TRP_3clk (1<<20) #define S3C2410_REFRESH_TRP_4clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - #define S3C2410_REFRESH_TSRC_MASK (3<<18) #define S3C2410_REFRESH_TSRC_4clk (0<<18) #define S3C2410_REFRESH_TSRC_5clk (1<<18) @@ -222,7 +195,6 @@ #define S3C2410_BANKSIZE_4M (0x5 << 0) #define S3C2410_BANKSIZE_2M (0x4 << 0) #define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) #define S3C2410_BANKSIZE_SCLK_EN (1<<4) #define S3C2410_BANKSIZE_SCKE_EN (1<<5) #define S3C2410_BANKSIZE_BURST (1<<7) diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index e82ab4aa7ab..c2cf4e56998 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -15,7 +15,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ + depends on ARCH_S3C2410 && !CPU_S3C2410 && \ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S deleted file mode 100644 index 0c5a7380556..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - .macro addruart, rp, rv - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h deleted file mode 100644 index 4326c30fabc..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c24a0/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C24A0 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h deleted file mode 100644 index 83ce2a7a9da..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef __ASM_ARCH_24A0_IRQS_H -#define __ASM_ARCH_24A0_IRQS_H __FILE__ - -#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */ -/* for generic entry-macro.S */ -#define IRQ_EINT0 IRQ_EINT0t2 - -#define IRQ_EINT3t6 S3C2410_IRQ(1) -#define IRQ_EINT7t10 S3C2410_IRQ(2) -#define IRQ_EINT11t14 S3C2410_IRQ(3) -#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */ -#define IRQ_TICK S3C2410_IRQ(5) -#define IRQ_DCTQ S3C2410_IRQ(6) -#define IRQ_MC S3C2410_IRQ(7) -#define IRQ_ME S3C2410_IRQ(8) /* 24 */ -#define IRQ_KEYPAD S3C2410_IRQ(9) -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3_4 S3C2410_IRQ(13) -#define IRQ_OS_TIMER IRQ_TIMER3_4 -#define IRQ_LCD S3C2410_IRQ(14) -#define IRQ_CAM_C S3C2410_IRQ(15) -#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */ -#define IRQ_UART0 S3C2410_IRQ(17) -#define IRQ_CAM_P S3C2410_IRQ(18) -#define IRQ_MODEM S3C2410_IRQ(19) -#define IRQ_DMA S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */ -#define IRQ_VLX_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) /* 46 */ -#define IRQ_ADC_PEN S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT1 S3C2410_IRQ(33) -#define IRQ_EINT2 S3C2410_IRQ(34) -#define IRQ_EINT3 S3C2410_IRQ(35) -#define IRQ_EINT4 S3C2410_IRQ(36) -#define IRQ_EINT5 S3C2410_IRQ(37) -#define IRQ_EINT6 S3C2410_IRQ(38) -#define IRQ_EINT7 S3C2410_IRQ(39) -#define IRQ_EINT8 S3C2410_IRQ(40) -#define IRQ_EINT9 S3C2410_IRQ(41) -#define IRQ_EINT10 S3C2410_IRQ(42) -#define IRQ_EINT11 S3C2410_IRQ(43) -#define IRQ_EINT12 S3C2410_IRQ(44) -#define IRQ_EINT13 S3C2410_IRQ(45) -#define IRQ_EINT14 S3C2410_IRQ(46) -#define IRQ_EINT15 S3C2410_IRQ(47) -#define IRQ_EINT16 S3C2410_IRQ(48) -#define IRQ_EINT17 S3C2410_IRQ(49) -#define IRQ_EINT18 S3C2410_IRQ(50) - -#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) - -/* SUB IRQS */ -#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQ(52) -#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53) - -#define IRQ_S3CUART_RX1 S3C2410_IRQ(54) -#define IRQ_S3CUART_TX1 S3C2410_IRQ(55) -#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56) - -#define IRQ_S3CUART_RX2 (0x0) -#define IRQ_S3CUART_TX2 (0x0) -#define IRQ_S3CUART_ERR2 (0x0) - - -#define IRQ_IRDA S3C2410_IRQ(57) -#define IRQ_MSTICK S3C2410_IRQ(58) -#define IRQ_RESERVED0 S3C2410_IRQ(59) -#define IRQ_RESERVED1 S3C2410_IRQ(60) -#define IRQ_RESERVED2 S3C2410_IRQ(61) -#define IRQ_TIMER3 S3C2410_IRQ(62) -#define IRQ_TIMER4 S3C2410_IRQ(63) -#define IRQ_WDT S3C2410_IRQ(64) -#define IRQ_BATFLT S3C2410_IRQ(65) -#define IRQ_POST S3C2410_IRQ(66) -#define IRQ_DISP_FIFO S3C2410_IRQ(67) -#define IRQ_PENUP S3C2410_IRQ(68) -#define IRQ_PENDN S3C2410_IRQ(69) -#define IRQ_ADC S3C2410_IRQ(70) -#define IRQ_DISP_FRAME S3C2410_IRQ(71) -#define IRQ_NFLASH S3C2410_IRQ(72) -#define IRQ_AC97 S3C2410_IRQ(73) -#define IRQ_SPI1 S3C2410_IRQ(74) -#define IRQ_VLX S3C2410_IRQ(75) -#define IRQ_DMA0 S3C2410_IRQ(76) -#define IRQ_DMA1 S3C2410_IRQ(77) -#define IRQ_DMA2 S3C2410_IRQ(78) -#define IRQ_DMA3 S3C2410_IRQ(79) - -#define IRQ_TC (0x0) - -#define NR_IRQS (IRQ_DMA3+1) - -#endif /* __ASM_ARCH_24A0_IRQS_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h deleted file mode 100644 index d88c8b24fe3..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ /dev/null @@ -1,86 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/map.h - * - * Copyright 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24A0 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_24A0_MAP_H -#define __ASM_ARCH_24A0_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map.h> - -#define S3C24A0_PA_IO_BASE (0x40000000) -#define S3C24A0_PA_CLKPWR (0x40000000) -#define S3C24A0_PA_IRQ (0x40200000) -#define S3C24A0_PA_DMA (0x40400000) -#define S3C24A0_PA_MEMCTRL (0x40C00000) -#define S3C24A0_PA_NAND (0x40C00000) -#define S3C24A0_PA_SROM (0x40C20000) -#define S3C24A0_PA_SDRAM (0x40C40000) -#define S3C24A0_PA_BUSM (0x40CE0000) -#define S3C24A0_PA_USBHOST (0x41000000) -#define S3C24A0_PA_MODEMIF (0x41180000) -#define S3C24A0_PA_IRDA (0x41800000) -#define S3C24A0_PA_TIMER (0x44000000) -#define S3C24A0_PA_WATCHDOG (0x44100000) -#define S3C24A0_PA_RTC (0x44200000) -#define S3C24A0_PA_UART (0x44400000) -#define S3C24A0_PA_UART0 (S3C24A0_PA_UART) -#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000) -#define S3C24A0_PA_SPI (0x44500000) -#define S3C24A0_PA_IIC (0x44600000) -#define S3C24A0_PA_IIS (0x44700000) -#define S3C24A0_PA_GPIO (0x44800000) -#define S3C24A0_PA_KEYIF (0x44900000) -#define S3C24A0_PA_USBDEV (0x44A00000) -#define S3C24A0_PA_AC97 (0x45000000) -#define S3C24A0_PA_ADC (0x45800000) -#define S3C24A0_PA_SDI (0x46000000) -#define S3C24A0_PA_MS (0x46100000) -#define S3C24A0_PA_LCD (0x4A000000) -#define S3C24A0_PA_VPOST (0x4A100000) - -/* physical addresses of all the chip-select areas */ - -#define S3C24A0_CS0 (0x00000000) -#define S3C24A0_CS1 (0x04000000) -#define S3C24A0_CS2 (0x08000000) -#define S3C24A0_CS3 (0x0C000000) -#define S3C24A0_CS4 (0x10000000) -#define S3C24A0_CS5 (0x40000000) - -#define S3C24A0_SDRAM_PA (S3C24A0_CS4) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST -#define S3C24XX_PA_DMA S3C24A0_PA_DMA -#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR -#define S3C24XX_PA_LCD S3C24A0_PA_LCD -#define S3C24XX_PA_UART S3C24A0_PA_UART -#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER -#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG -#define S3C24XX_PA_IIS S3C24A0_PA_IIS -#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO -#define S3C24XX_PA_RTC S3C24A0_PA_RTC -#define S3C24XX_PA_ADC S3C24A0_PA_ADC -#define S3C24XX_PA_SPI S3C24A0_PA_SPI -#define S3C24XX_PA_SDI S3C24A0_PA_SDI -#define S3C24XX_PA_NAND S3C24A0_PA_NAND - -#define S3C_PA_UART S3C24A0_PA_UART -#define S3C_PA_IIC S3C24A0_PA_IIC -#define S3C_PA_NAND S3C24XX_PA_NAND - -#endif /* __ASM_ARCH_24A0_MAP_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h deleted file mode 100644 index 7d208a71b17..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_24A0_MEMORY_H -#define __ASM_ARCH_24A0_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x10000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) -#define __pfn_to_bus(x) __pfn_to_phys(x) -#define __bus_to_pfn(x) __phys_to_pfn(x) - -#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h deleted file mode 100644 index be0af518b48..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h +++ /dev/null @@ -1,88 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h - * - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24A0 clock register definitions -*/ - -#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H -#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__ - -#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10) -#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14) -#define S3C24A0_CLKCON S3C2410_CLKREG(0x20) -#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24) -#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28) - -/* CLKCON register bits */ - -#define S3C24A0_CLKCON_VLX (1<<29) -#define S3C24A0_CLKCON_VPOST (1<<28) -#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */ -#define S3C24A0_CLKCON_MPEGDCTQ (1<<26) -#define S3C24A0_CLKCON_VPOSTIF (1<<25) -#define S3C24A0_CLKCON_MPEG4IF (1<<24) -#define S3C24A0_CLKCON_CAM_UPLL (1<<23) -#define S3C24A0_CLKCON_LCDC (1<<22) -#define S3C24A0_CLKCON_CAM_HCLK (1<<21) -#define S3C24A0_CLKCON_MPEG4 (1<<20) -#define S3C24A0_CLKCON_KEYPAD (1<<19) -#define S3C24A0_CLKCON_ADC (1<<18) -#define S3C24A0_CLKCON_SDI (1<<17) -#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */ -#define S3C24A0_CLKCON_USBD (1<<15) -#define S3C24A0_CLKCON_GPIO (1<<14) -#define S3C24A0_CLKCON_IIS (1<<13) -#define S3C24A0_CLKCON_IIC (1<<12) -#define S3C24A0_CLKCON_SPI (1<<11) -#define S3C24A0_CLKCON_UART1 (1<<10) -#define S3C24A0_CLKCON_UART0 (1<<9) -#define S3C24A0_CLKCON_PWMT (1<<8) -#define S3C24A0_CLKCON_USBH (1<<7) -#define S3C24A0_CLKCON_AC97 (1<<6) -#define S3C24A0_CLKCON_IrDA (1<<4) -#define S3C24A0_CLKCON_IDLE (1<<2) -#define S3C24A0_CLKCON_MON (1<<1) -#define S3C24A0_CLKCON_STOP (1<<0) - -/* CLKSRC register bits */ - -#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */ -#define S3C24A0_CLKSRC_UPLL (1<<7) -#define S3C24A0_CLKSRC_MPLL (1<<5) -#define S3C24A0_CLKSRC_EXT (1<<4) - -/* Use a single interface with the common code, for s3c24xx */ - -#define S3C2410_MPLLCON S3C24A0_MPLLCON -#define S3C2410_UPLLCON S3C24A0_UPLLCON -#define S3C2410_CLKCON S3C24A0_CLKCON -#define S3C2410_CLKSLOW S3C24A0_CLKSRC -#define S3C2410_CLKDIVN S3C24A0_CLKDIVN - -#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE -#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP -#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC -#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH -#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD -#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT -#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI -#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0 -#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1 -#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO -#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC -#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC -#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS -#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI - -#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL -#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL -#define S3C2410_CLKSLOW_SLOW (0xFF) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1) - -#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h deleted file mode 100644 index 6086f6f189e..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H -#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__ - - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x034) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X038) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038) - -#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */ - - - diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h deleted file mode 100644 index bd1bd195765..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/system.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24A0 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/hardware.h> -#include <asm/io.h> - -#include <mach/map.h> - -static void arch_idle(void) -{ - /* currently no specific idle support. */ -} - -void (*s3c24xx_reset_hook)(void); - -#include <asm/plat-s3c24xx/system-reset.h> diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h deleted file mode 100644 index 9dea8ba6fb7..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24A0 - timer tick support - */ - -#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4; -} diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h deleted file mode 100644 index 98573424a01..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h deleted file mode 100644 index 6480b15277f..00000000000 --- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h - * - * Copyright 2008 Simtec Electronics <linux@simtec.co.uk> - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24A0 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d9c4096ebf4..8c5b3029b39 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 || ARCH_S3C24A0 + depends on ARCH_S3C2410 default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 4a10c0f684b..c1fc6c6fac7 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -46,7 +46,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> #include <plat/s3c2416.h> @@ -55,7 +54,6 @@ /* table of supported CPUs */ -static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2416[] = "S3C2416/S3C2450"; @@ -157,15 +155,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2443_init, .name = name_s3c2443, }, - { - .idcode = 0x0, /* S3C2400 doesn't have an idcode */ - .idmask = 0xffffffff, - .map_io = s3c2400_map_io, - .init_clocks = s3c2400_init_clocks, - .init_uarts = s3c2400_init_uarts, - .init = s3c2400_init, - .name = name_s3c2400 - }, }; /* minimal IO mapping */ @@ -200,11 +189,7 @@ static unsigned long s3c24xx_read_idcode_v5(void) static unsigned long s3c24xx_read_idcode_v4(void) { -#ifndef CONFIG_CPU_S3C2400 return __raw_readl(S3C2410_GSTATUS1); -#else - return 0UL; -#endif } /* Hook for arm_pm_restart to ensure we execute the reset code diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h index a6f1d5df13b..cc44e0e931e 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -64,14 +64,5 @@ #define S3C2410_IISFCON_RXMASK (0x3f) #define S3C2410_IISFCON_RXSHIFT (0) -#define S3C2400_IISFCON_TXDMA (1<<11) -#define S3C2400_IISFCON_RXDMA (1<<10) -#define S3C2400_IISFCON_TXENABLE (1<<9) -#define S3C2400_IISFCON_RXENABLE (1<<8) -#define S3C2400_IISFCON_TXMASK (0x07 << 4) -#define S3C2400_IISFCON_TXSHIFT (4) -#define S3C2400_IISFCON_RXMASK (0x07) -#define S3C2400_IISFCON_RXSHIFT (0) - #define S3C2410_IISFIFO (0x10) #endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h index 2b35479ee35..892e2f680fc 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h @@ -67,7 +67,6 @@ #define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ #define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */ #define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ #define S3C2410_SPPRE (0x0C) diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h deleted file mode 100644 index b3feaea5c70..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 09-Fev-2006 LCVR First version, based on s3c2410.h -*/ - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_init(void); - -extern void s3c2400_map_io(void); - -extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2400_init_clocks(int xtal); - -#else -#define s3c2400_init_clocks NULL -#define s3c2400_init_uarts NULL -#define s3c2400_map_io NULL -#define s3c2400_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 3ad8386599c..9a4e53d5296 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -140,7 +140,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, /* Pull-{up,down} resistor controls. * - * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2410,S3C2440 = Pull-UP, * S3C2412,S3C2413 = Pull-Down * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] * S3C2443 = Pull-Both [not same as S3C6400] diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 116edfe120b..bac36fa3bec 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -155,14 +155,6 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) -/* UFSTAT S3C24A0 */ -#define S3C24A0_UFSTAT_TXFULL (1 << 14) -#define S3C24A0_UFSTAT_RXFULL (1 << 6) -#define S3C24A0_UFSTAT_TXMASK (63 << 8) -#define S3C24A0_UFSTAT_TXSHIFT (8) -#define S3C24A0_UFSTAT_RXMASK (63) -#define S3C24A0_UFSTAT_RXSHIFT (0) - /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) |