diff options
| author | Russell King <rmk+kernel@arm.linux.org.uk> | 2014-06-17 14:41:01 +0100 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@freescale.com> | 2014-06-17 22:00:07 +0800 |
| commit | 589681b20688267a06a068d77ef10fc7c34168ba (patch) | |
| tree | 5498c8aff3ebd42064cb90fccf0ac6c0e8663bc3 /arch | |
| parent | eea53bb16d0ff19c1fe2d29c359100df739a95d7 (diff) | |
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
The configuration of the USB OTG is a platform configuration decision,
not a microsom decision. Move this configuration out to the platform
level files.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-hummingboard.dts | 10 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 10 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-microsom.dtsi | 13 |
3 files changed, 20 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5373a5f2782..c8e51dd41b8 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -143,6 +143,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; }; + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; }; @@ -178,6 +186,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 9202c8d18a3..e8e781656b3 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -134,6 +134,14 @@ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; + pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + /* + * The Cubox-i pulls this low, but as it's pointless + * leaving it as a pull-up, even if it is just 10uA. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; }; @@ -170,6 +178,8 @@ }; &usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f2..79eac6849d4 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -10,14 +10,6 @@ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; - - pinctrl_microsom_usbotg: microsom-usbotg { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; }; }; @@ -26,8 +18,3 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_usbotg>; -}; |