Merge branch 'omap-for-v3.14/dt' into omap-for-v3.14/board-removal

7 files changed, 343 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a65b24..fc37bca0ccd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -173,12 +173,17 @@ dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
 	nspire-tp.dtb \
 	nspire-clp.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap2430-sdp.dtb \
+	omap2420-n800.dtb \
+	omap2420-n810.dtb \
+	omap2420-n810-wimax.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
+	omap3-ldp.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/omap2420-n800.dts
new file mode 100644
index 00000000000..d8c1b423606
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n800.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N800";
+	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/omap2420-n810-wimax.dts
new file mode 100644
index 00000000000..6b25b0359ac
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n810-wimax.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810 WiMax";
+	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
new file mode 100644
index 00000000000..21baec154b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810";
+	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
new file mode 100644
index 00000000000..c5396933d02
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -0,0 +1,34 @@
+#include "omap2420.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	ocp {
+		i2c@0 {
+			compatible = "i2c-cbus-gpio";
+			gpios = <&gpio3 2 0 /* gpio66 clk */
+				 &gpio3 1 0 /* gpio65 dat */
+				 &gpio3 0 0 /* gpio64 sel */
+				>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			retu_mfd: retu@1 {
+				compatible = "retu-mfd";
+				interrupt-parent = <&gpio4>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
new file mode 100644
index 00000000000..2c90d29b4ca
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap2430.dtsi"
+
+/ {
+	model = "TI OMAP2430 SDP";
+	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+#include "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+&gpmc {
+	ranges = <5 0 0x08000000 0x01000000>;
+	ethernet@gpmc {
+		compatible = "smsc,lan91c94";
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
+		reg = <5 0x300 0xf>;
+		bank-width = <2>;
+		gpmc,mux-add-data;
+        };
+};
+
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
new file mode 100644
index 00000000000..ddce0d807f7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+	compatible = "ti,omap3-ldp", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		key_enter {
+			label = "enter";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+			linux,code = <0x0107001c>; /* KEY_ENTER */
+			gpio-key,wakeup;
+		};
+
+		key_f1 {
+			label = "f1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+			linux,code = <0x0303003b>; /* KEY_F1 */
+			gpio-key,wakeup;
+		};
+
+		key_f2 {
+			label = "f2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+			linux,code = <0x0403003c>; /* KEY_F2 */
+			gpio-key,wakeup;
+		};
+
+		key_f3 {
+			label = "f3";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+			linux,code = <0x0503003d>; /* KEY_F3 */
+			gpio-key,wakeup;
+		};
+
+		key_f4 {
+			label = "f4";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+			linux,code = <0x0704003e>; /* KEY_F4 */
+			gpio-key,wakeup;
+		};
+
+		key_left {
+			label = "left";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+			linux,code = <0x04070069>; /* KEY_LEFT */
+			gpio-key,wakeup;
+		};
+
+		key_right {
+			label = "right";
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+			linux,code = <0x0507006a>; /* KEY_RIGHT */
+			gpio-key,wakeup;
+		};
+
+		key_up {
+			label = "up";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+			linux,code = <0x06070067>; /* KEY_UP */
+			gpio-key,wakeup;
+		};
+
+		key_down {
+			label = "down";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+			linux,code = <0x0707006c>; /* KEY_DOWN */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x01000000>,
+		 <1 0 0x08000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,nand";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x1c0000 0x40000>;
+		};
+		partition@200000 {
+			label = "Kernel";
+			reg = <0x200000 0x1e00000>;
+		};
+		partition@2000000 {
+			label = "Filesystem";
+			reg = <0x2000000 0xe000000>;
+		};
+	};
+
+	ethernet@gpmc {
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		reg = <1 0 0xff>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+		>;
+	};
+
+	musb_pins: pinmux_musb_pins {
+		pinctrl-single,pins = <
+			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+		>;
+	};
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux1 {
+	/* Needed for ads7846 */
+        regulator-name = "vcc";
+};
+
+&vpll2 {
+       /* Needed for DSS */
+       regulator-name = "vdds_dsi";
+};