summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorRob Herring <rob.herring@calxeda.com>2012-10-25 12:13:47 -0500
committerRob Herring <rob.herring@calxeda.com>2012-10-31 13:46:50 -0500
commit7a2848d369b2b9281400e6c9f08e21ec71cd1dcb (patch)
treeabb8983696264faee745f49a8132589134f0e791 /arch
parent0336517b38c5fd643784eeee8f0d73efd48e3361 (diff)
ARM: highbank: abstract out SCU usage
In preparation for A15 support on ECX-2000, the direct calls to SCU registers must be conditional. The SCU power mode register is replaced by a custom register on ECX-2000. Rather than read the number of cores from the SCU, just hardcode it to 4. This removes one use of SCU and removes the need for the SCU to be statically mapped. The cpu initialization will ultimately come from DT. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-highbank/highbank.c21
-rw-r--r--arch/arm/mach-highbank/hotplug.c6
-rw-r--r--arch/arm/mach-highbank/platsmp.c7
-rw-r--r--arch/arm/mach-highbank/pm.c3
-rw-r--r--arch/arm/mach-highbank/sysregs.h19
-rw-r--r--arch/arm/mach-highbank/system.c2
6 files changed, 29 insertions, 29 deletions
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 40e36a50304..3da921a1a7f 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -28,30 +28,19 @@
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "core.h"
#include "sysregs.h"
void __iomem *sregs_base;
-
-#define HB_SCU_VIRT_BASE 0xfee00000
-void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
-
-static struct map_desc scu_io_desc __initdata = {
- .virtual = HB_SCU_VIRT_BASE,
- .pfn = 0, /* run-time */
- .length = SZ_4K,
- .type = MT_DEVICE,
-};
+void __iomem *scu_base_addr;
static void __init highbank_scu_map_io(void)
{
@@ -60,13 +49,11 @@ static void __init highbank_scu_map_io(void)
/* Get SCU base */
asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
- scu_io_desc.pfn = __phys_to_pfn(base);
- iotable_init(&scu_io_desc, 1);
+ scu_base_addr = ioremap(base, SZ_4K);
}
static void __init highbank_map_io(void)
{
- highbank_scu_map_io();
highbank_lluart_map_io();
}
@@ -99,6 +86,9 @@ static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+ if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+ highbank_scu_map_io();
+
#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x1);
@@ -145,7 +135,6 @@ static struct sys_timer highbank_timer = {
static void highbank_power_off(void)
{
hignbank_set_pwr_shutdown();
- scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
while (1)
cpu_do_idle();
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 2c1b8c3c8e4..7b60faccd55 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -14,13 +14,11 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <asm/smp_scu.h>
#include <asm/cacheflush.h>
#include "core.h"
+#include "sysregs.h"
extern void secondary_startup(void);
@@ -33,7 +31,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
flush_cache_all();
highbank_set_cpu_jump(cpu, secondary_startup);
- scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ highbank_set_core_pwr();
cpu_do_idle();
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index fa9560ec6e7..1129957f6c1 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -42,9 +42,7 @@ static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struc
*/
static void __init highbank_smp_init_cpus(void)
{
- unsigned int i, ncores;
-
- ncores = scu_get_core_count(scu_base_addr);
+ unsigned int i, ncores = 4;
/* sanity check */
if (ncores > NR_CPUS) {
@@ -65,7 +63,8 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
- scu_enable(scu_base_addr);
+ if (scu_base_addr)
+ scu_enable(scu_base_addr);
/*
* Write the address of secondary startup into the jump table
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index de866f21331..74aa135966f 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -19,7 +19,6 @@
#include <linux/suspend.h>
#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include "core.h"
@@ -35,8 +34,6 @@ static int highbank_pm_enter(suspend_state_t state)
{
hignbank_set_pwr_suspend();
highbank_set_cpu_jump(0, cpu_resume);
-
- scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_suspend(0, highbank_suspend_finish);
return 0;
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index 0e913389f44..e13e8ea7c6c 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -17,6 +17,10 @@
#define _MACH_HIGHBANK__SYSREGS_H_
#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include "core.h"
extern void __iomem *sregs_base;
@@ -29,24 +33,39 @@ extern void __iomem *sregs_base;
#define HB_PWR_HARD_RESET 2
#define HB_PWR_SHUTDOWN 3
+#define SREG_CPU_PWR_CTRL(c) (0x200 + ((c) * 4))
+
+static inline void highbank_set_core_pwr(void)
+{
+ int cpu = cpu_logical_map(smp_processor_id());
+ if (scu_base_addr)
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ else
+ writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+
static inline void hignbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+ highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+ highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+ highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+ highbank_set_core_pwr();
}
#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 82c27230d4a..194a5bbb736 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -14,7 +14,6 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
-#include <asm/smp_scu.h>
#include <asm/proc-fns.h>
#include "core.h"
@@ -27,7 +26,6 @@ void highbank_restart(char mode, const char *cmd)
else
hignbank_set_pwr_soft_reset();
- scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
cpu_do_idle();
}