sh: Tidy up dependencies for SH-2 build.

SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 files changed, 44 insertions, 47 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 78f5f230513..b16407c9f2c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,8 +55,21 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config SYS_SUPPORTS_PM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
+	select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+	bool
+
+config SYS_SUPPORTS_NUMA
+	bool
+
+config SYS_SUPPORTS_PCI
+	bool
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
@@ -102,7 +115,7 @@ endchoice
 
 config SH_FPU
 	bool "FPU support"
-	depends on !CPU_SH3
+	depends on CPU_SH4
 	default y
 	help
 	  Selecting this option will enable support for SH processors that
@@ -236,6 +249,7 @@ config SH_7751_SOLUTION_ENGINE
 config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
 	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -275,20 +289,16 @@ config SH_7751_SYSTEMH
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
 	depends on CPU_SUBTYPE_SH7709
 	help
 	  Select HP6XX if configuring for a HP jornada HP6xx.
 	  More information (hardware only) at
 	  <http://www.hp.com/jornada/>.
 
-config SH_SATURN
-	bool "Saturn"
-	depends on CPU_SUBTYPE_SH7604
-	help
-	  Select Saturn if configuring for a SEGA Saturn.
-
 config SH_DREAMCAST
 	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
 	depends on CPU_SUBTYPE_SH7091
 	help
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -307,6 +317,7 @@ config SH_MPC1211
 config SH_SH03
 	bool "Interface CTP/PCI-SH03"
 	depends on CPU_SUBTYPE_SH7751 && BROKEN
+	select SYS_SUPPORTS_PCI
 	help
 	  CTP/PCI-SH03 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -315,6 +326,7 @@ config SH_SH03
 config SH_SECUREEDGE5410
 	bool "SecureEdge5410"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select SecureEdge5410 if configuring for a SnapGear SH board.
 	  This includes both the OEM SecureEdge products as well as the
@@ -337,6 +349,7 @@ config SH_7710VOIPGW
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
@@ -344,6 +357,7 @@ config SH_RTS7751R2D
 config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
@@ -359,12 +373,14 @@ config SH_SH4202_MICRODEV
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  I-O DATA DEVICE, INC. "LANDISK Series" support.
 
 config SH_TITAN
 	bool "TITAN"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
@@ -378,6 +394,7 @@ config SH_SHMIN
 config SH_LBOX_RE2
 	bool "L-BOX RE2"
 	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
@@ -481,8 +498,10 @@ config SH_PCLK_FREQ
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
-	default 0
 	depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+	default 6 if CPU_SUBTYPE_SH7206
+	default 5 if CPU_SUBTYPE_SH7619
+	default 0
 	help
 	  MD2 - MD0 pin setting.
 
@@ -554,6 +573,7 @@ config CRASH_DUMP
 
 config SMP
 	bool "Symmetric multi-processing support"
+	depends on SYS_SUPPORTS_SMP
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -617,6 +637,7 @@ config BOOT_LINK_OFFSET
 
 config UBC_WAKEUP
 	bool "Wakeup UBC on startup"
+	depends on CPU_SH4
 	help
 	  Selecting this option will wakeup the User Break Controller (UBC) on
 	  startup. Although the UBC is left in an awake state when the processor
@@ -645,8 +666,8 @@ menu "Bus options"
 # we're not using PCMCIA, so we make it dependent on
 # PCMCIA outright. -- PFM.
 config ISA
-	bool
-	default y if PCMCIA
+	def_bool y
+	depends on PCMCIA && HD6446X_SERIES
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -701,7 +722,7 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
 
 source kernel/power/Kconfig
 
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index d849d47d6af..52f6a99c8ec 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -86,6 +86,7 @@ config SH_KGDB
 	bool "Include KGDB kernel debugger"
 	select FRAME_POINTER
 	select DEBUG_INFO
+	depends on CPU_SH3 || CPU_SH4
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 0582ca8346b..2e516e9a6ed 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -13,10 +13,8 @@ config VOYAGERGX
 	  are additional GPIO bits that can be used to interface to
 	  external as well.
 
-# A board must have defined HD6446X_SERIES in order to see these
 config HD6446X_SERIES
-	bool "HD6446x support"
-	default n
+	bool
 
 choice
 	prompt "HD6446x options"
@@ -25,7 +23,6 @@ choice
 
 config HD64461
 	bool "Hitachi HD64461 companion chip support"
-	depends on CPU_SUBTYPE_SH7709
 	---help---
 	  The Hitachi HD64461 provides an interface for
 	  the SH7709 CPU, supporting a LCD controller,
@@ -40,7 +37,6 @@ config HD64461
 
 config HD64465
 	bool "Hitachi HD64465 companion chip support"
-	depends on CPU_SUBTYPE_SH7750
 	---help---
 	  The Hitachi HD64465 provides an interface for
 	  the SH7750 CPU, supporting a LCD controller,
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 6d1cbbe6745..fbc6f2c8649 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -1,5 +1,6 @@
 config PCI
 	bool "PCI support"
+	depends on SYS_SUPPORTS_PCI
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 6451ad63017..9172e97dc26 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -21,8 +21,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cache.h>
 #include <asm/io.h>
-
-extern void detect_cpu_and_cache_system(void);
+#include <asm/ubc.h>
 
 /*
  * Generic wrapper for command line arguments to disable on-chip
@@ -152,15 +151,6 @@ static void __init cache_init(void)
 	flags |= CCR_CACHE_CB;
 #endif
 
-#ifdef CONFIG_SH_OCRAM
-	/* Turn on OCRAM -- halve the OC */
-	flags |= CCR_CACHE_ORA;
-	current_cpu_data.dcache.sets >>= 1;
-
-	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
-				    current_cpu_data.dcache.linesz;
-#endif
-
 	ctrl_outl(flags, CCR);
 	back_to_P1();
 }
@@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void)
 	}
 #endif
 
-#ifdef CONFIG_UBC_WAKEUP
 	/*
 	 * Some brain-damaged loaders decided it would be a good idea to put
 	 * the UBC to sleep. This causes some issues when it comes to things
@@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void)
 	 * we wake it up and hope that all is well.
 	 */
 	ubc_wakeup();
-#endif
-
 	speculative_execution_init();
 }
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 74765ae4292..abbf17427e5 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -9,9 +9,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
-
 #include <linux/init.h>
+#include <linux/smp.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
 
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9ae3da00eaa..6334a4c54c7 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -320,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc)
 	ctrl_outl(pc, UBC_BARA);
 
 #ifdef CONFIG_MMU
-	/* We don't have any ASID settings for the SH-2! */
-	if (current_cpu_data.type != CPU_SH7604)
-		ctrl_outb(asid, UBC_BASRA);
+	ctrl_outb(asid, UBC_BASRA);
 #endif
 
 	ctrl_outl(0, UBC_BAMRA);
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index b013a05fbc5..58bf6225d91 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -48,6 +48,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
+	select CPU_HAS_IPR_IRQ
 
 # SH-2A Processor Support
 
@@ -208,6 +209,7 @@ config CPU_SUBTYPE_SH7722
 	select CPU_SHX2
 	select CPU_HAS_IPR_IRQ
 	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
 
 endchoice
 
@@ -292,7 +294,7 @@ config VSYSCALL
 
 config NUMA
 	bool "Non Uniform Memory Access (NUMA) Support"
-	depends on MMU && SPARSEMEM && EXPERIMENTAL
+	depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL
 	default n
 	help
 	  Some SH systems have many various memories scattered around
@@ -308,6 +310,7 @@ config NODES_SHIFT
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
+	depends on !NUMA
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
@@ -419,15 +422,4 @@ config SH_WRITETHROUGH
 
 	  If unsure, say N.
 
-config SH_OCRAM
-	bool "Operand Cache RAM (OCRAM) support"
-	help
-	  Selecting this option will automatically tear down the number of
-	  sets in the dcache by half, which in turn exposes a memory range.
-
-	  The addresses for the OC RAM base will vary according to the
-	  processor version. Consult vendor documentation for specifics.
-
-	  If unsure, say N.
-
 endmenu
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 40d4e798e7f..82b68c789a5 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -300,6 +300,7 @@ int remove_memory(u64 start, u64 size)
 }
 EXPORT_SYMBOL_GPL(remove_memory);
 
+#ifdef CONFIG_NUMA
 int memory_add_physaddr_to_nid(u64 addr)
 {
 	/* Node 0 for now.. */
@@ -307,3 +308,4 @@ int memory_add_physaddr_to_nid(u64 addr)
 }
 EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
+#endif