diff options
author | Olof Johansson <olof@lixom.net> | 2012-09-22 22:20:37 -0700 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2012-09-22 22:20:37 -0700 |
commit | 40169a7c399346281da55ed9905a104d3da47945 (patch) | |
tree | 47181afbd7ccf73af8ec0b840d637a794062faa0 /arch | |
parent | 84bae6c379e362aa017efd417199f51d5c2273ac (diff) | |
parent | c164fa62b93782165f12c0e8366f7b46507edb4d (diff) |
Merge branch 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt
* 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
ARM: ux500: Fix SSP register address format
ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
ARM: ux500: Add all encompassing sound node to the HREF Device Tree
ARM: ux500: Add nodes for the MSP into the HREF Device Tree
ARM: ux500: Add all known I2C sub-device nodes to the HREF DT
ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled
ARM: ux500: Stop registering Audio devices for HREF when DT is enabled
ARM: ux500: Add all encompassing sound node to the Snowball Device Tree
ARM: ux500: Add nodes for the MSP into Device Tree
ARM: ux500: Rename MSP board file to something more meaningful
ARM: ux500: Remove platform registration of MSP devices
ARM: ux500: Stop registering the MOP500 Audio driver from platform code
ARM: ux500: Pass MSP DMA platform data though AUXDATA
ARM: ux500: Fork MSP platform registration for step-by-step DT enablement
ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree
ARM: ux500: Clean-up MSP platform code
ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
ARM: ux500: Add UART support to the HREF Device Tree
ARM: ux500: Add skeleton Device Tree for the HREF reference board
...
+ sync to v3.6-rc6
Diffstat (limited to 'arch')
51 files changed, 584 insertions, 407 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a5..e968a52e488 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6..a051dfbdd7d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80baf..81769c1341f 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 3180a9c588b..748ba7aa746 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -194,6 +194,8 @@ interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; ranges; prcmu-timer-4@80157450 { @@ -330,6 +332,7 @@ ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ + interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; @@ -371,7 +374,7 @@ }; ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; + compatible = "stericsson,ab8500-poweron-key"; interrupts = <6 0x4 7 0x4>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; @@ -389,6 +392,12 @@ compatible = "stericsson,ab8500-debug"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; @@ -471,48 +480,63 @@ }; i2c@80004000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80122000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80128000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80110000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; - reg = <80002000 0x1000>; + reg = <0x80002000 0x1000>; interrupts = <0 14 0x4>; #address-cells = <1>; #size-cells = <0>; @@ -580,6 +604,39 @@ status = "disabled"; }; + msp0: msp@80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <0 31 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + // HDMI sound + msp2: msp@80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <0 98 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + external-bus@50000000 { compatible = "simple-bus"; reg = <0x50000000 0x4000000>; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts new file mode 100644 index 00000000000..2131d77dc9c --- /dev/null +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -0,0 +1,95 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson HREF platform with Device Tree"; + compatible = "st-ericsson,hrefv60+"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 7e334d4cae2..702c0baa600 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "db8500.dtsi" +/include/ "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -83,6 +83,22 @@ }; soc-u9500 { + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + external-bus@50000000 { status = "okay"; @@ -111,7 +127,6 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0..5c8b3bf4d82 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b560f..5f6ddcc5645 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae..99a19512ee2 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a6352e0b..77bd79f2ffd 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -130,42 +141,57 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -219,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -300,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd9410..281bf330124 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; @@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f7945218b8c..b0179b89a04 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254..395d5fbb8fa 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e3..9b06bb41fca 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see <asm/uaccess.h> @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c58..3d73dcb959b 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9f..4431a62fff5 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10ba..65fb8bcd86c 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index c1309495eeb..eef99b77c40 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -233,10 +233,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3f9c4..34c2c7f59f0 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 7aa5ecaee5a..8e06de665b1 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68dbecfa..f99e65cfb86 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338fe4d3..975f6bda0e0 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index b54427dec2a..ecaad7d371e 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -47,7 +47,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 4c6b5a77405..4a810f6c4c0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 75fbbac1392..8fec2cee3e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b95244b76a1..110be87cd99 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4209,7 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4827,7 +4827,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5361,7 +5361,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6031,7 +6031,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6067,7 +6067,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6098,7 +6098,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e2084facca5..8f452504720 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -263,6 +263,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -302,6 +303,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 5691ef679d0..f24710dfc39 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ board-mop500-pins.o \ - board-mop500-msp.o + board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-audio.c index df15646036a..070629a9562 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,7 +7,6 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/pinctrl/consumer.h> #include <plat/gpio-nomadik.h> #include <plat/pincfg.h> @@ -23,53 +22,6 @@ #include "devices-db8500.h" #include "pins-db8500.h" -/* MSP1/3 Tx/Rx usage protection */ -static DEFINE_SPINLOCK(msp_rxtx_lock); - -/* Reference Count */ -static int msp_rxtx_ref; - -/* Pin modes */ -struct pinctrl *msp1_p; -struct pinctrl_state *msp1_def; -struct pinctrl_state *msp1_sleep; - -int msp13_i2s_init(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) { - retval = pinctrl_select_state(msp1_p, msp1_def); - if (retval) - pr_err("could not set MSP1 defstate\n"); - } - if (!retval) - msp_rxtx_ref++; - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - -int msp13_i2s_exit(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - WARN_ON(!msp_rxtx_ref); - msp_rxtx_ref--; - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) { - retval = pinctrl_select_state(msp1_p, msp1_sleep); - if (retval) - pr_err("could not set MSP1 sleepstate\n"); - } - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, @@ -96,7 +48,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = { /* data_width is set during configuration */ }; -static struct msp_i2s_platform_data msp0_platform_data = { +struct msp_i2s_platform_data msp0_platform_data = { .id = MSP_I2S_0, .msp_i2s_dma_rx = &msp0_dma_rx, .msp_i2s_dma_tx = &msp0_dma_tx, @@ -128,12 +80,10 @@ static struct stedma40_chan_cfg msp1_dma_tx = { /* data_width is set during configuration */ }; -static struct msp_i2s_platform_data msp1_platform_data = { +struct msp_i2s_platform_data msp1_platform_data = { .id = MSP_I2S_1, .msp_i2s_dma_rx = NULL, .msp_i2s_dma_tx = &msp1_dma_tx, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, }; static struct stedma40_chan_cfg msp2_dma_rx = { @@ -193,11 +143,11 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, /* Platform device for ASoC MOP500 machine */ static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, + .name = "snd-soc-mop500", + .id = 0, + .dev = { + .platform_data = NULL, + }, }; /* Platform device for Ux500-PCM */ @@ -209,59 +159,37 @@ static struct platform_device ux500_pcm = { }, }; -static struct msp_i2s_platform_data msp2_platform_data = { +struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, .msp_i2s_dma_tx = &msp2_dma_tx, }; -static struct msp_i2s_platform_data msp3_platform_data = { +struct msp_i2s_platform_data msp3_platform_data = { .id = MSP_I2S_3, .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, }; -int mop500_msp_init(struct device *parent) +void mop500_audio_init(struct device *parent) { - struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, &msp0_platform_data); - msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, &msp1_platform_data); db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, &msp2_platform_data); db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, &msp3_platform_data); +} - /* Get the pinctrl handle for MSP1 */ - if (msp1) { - msp1_p = pinctrl_get(&msp1->dev); - if (IS_ERR(msp1_p)) - dev_err(&msp1->dev, "could not get MSP1 pinctrl\n"); - else { - msp1_def = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(msp1_def)) { - dev_err(&msp1->dev, - "could not get MSP1 defstate\n"); - } - msp1_sleep = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(msp1_sleep)) - dev_err(&msp1->dev, - "could not get MSP1 idlestate\n"); - } - } - +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_audio_init(struct device *parent) +{ pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); platform_device_register(&ux500_pcm); - - return 0; } diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h deleted file mode 100644 index 6fcfb5e2cc9..00000000000 --- a/arch/arm/mach-ux500/board-mop500-msp.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2012 - * - * Author: Ola Lilja <ola.o.lilja@stericsson.com>, - * for ST-Ericsson. - * - * License terms: - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -void mop500_msp_init(struct device *parent); diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 18ff781cfbe..9c8e4a9e83e 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi1_data = { +struct mmci_platform_data mop500_sdi1_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA, @@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi2_data = { +struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1d2e3c6f8b5..12ab21d5511 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -54,7 +54,6 @@ #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" -#include "board-mop500-msp.h" static struct gpio_led snowball_led_array[] = { { @@ -587,7 +586,7 @@ static void __init mop500_init_machine(void) mop500_i2c_init(parent); mop500_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); u8500_cryp1_hash1_init(parent); @@ -621,7 +620,7 @@ static void __init snowball_init_machine(void) mop500_i2c_init(parent); snowball_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); /* This board has full regulator constraints */ @@ -653,7 +652,7 @@ static void __init hrefv60_init_machine(void) mop500_i2c_init(parent); hrefv60_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -705,12 +704,9 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), @@ -718,6 +714,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA bindings. */ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), /* Requires clock name bindings. */ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), @@ -736,6 +734,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), + /* Requires clock name and DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), {}, }; @@ -776,7 +783,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -785,7 +792,7 @@ static void __init u8500_init_machine(void) mop500_uib_init(); } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_msp_init(parent); + mop500_of_audio_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -796,16 +803,6 @@ static void __init u8500_init_machine(void) platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - hrefv60_sdi_init(parent); - mop500_msp_init(parent); - - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - mop500_uib_init(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index b5bfc1a78b1..aca39a68712 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -9,6 +9,7 @@ /* For NOMADIK_NR_GPIO */ #include <mach/irqs.h> +#include <mach/msp.h> #include <linux/amba/mmci.h> /* Snowball specific GPIO assignments, this board has no GPIO expander */ @@ -80,7 +81,14 @@ struct device; struct i2c_board_info; extern struct mmci_platform_data mop500_sdi0_data; +extern struct mmci_platform_data mop500_sdi1_data; +extern struct mmci_platform_data mop500_sdi2_data; extern struct mmci_platform_data mop500_sdi4_data; +extern struct msp_i2s_platform_data msp0_platform_data; +extern struct msp_i2s_platform_data msp1_platform_data; +extern struct msp_i2s_platform_data msp2_platform_data; +extern struct msp_i2s_platform_data msp3_platform_data; +extern struct arm_pmu_platdata db8500_pmu_platdata; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); @@ -91,6 +99,9 @@ void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); +void mop500_audio_init(struct device *parent); +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_audio_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index db3c52d56ca..38b7f9c4788 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -138,10 +138,6 @@ static struct platform_device *platform_devs[] __initdata = { &db8500_prcmu_device, }; -static struct platform_device *of_platform_devs[] __initdata = { - &u8500_dma40_device, -}; - static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, @@ -235,7 +231,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) struct device * __init u8500_of_init_devices(void) { struct device *parent; - int i; parent = db8500_soc_device_init(); @@ -244,8 +239,7 @@ struct device * __init u8500_of_init_devices(void) platform_device_register_data(parent, "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) - of_platform_devs[i]->dev.parent = parent; + u8500_dma40_device.dev.parent = parent; /* * Devices to be DT:ed: @@ -253,7 +247,7 @@ struct device * __init u8500_of_init_devices(void) * db8500_pmu_device = done * db8500_prcmu_device = done */ - platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); + platform_device_register(&u8500_dma40_device); return parent; } diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h index 798be19129e..3cc7142eee0 100644 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -22,8 +22,6 @@ struct msp_i2s_platform_data { enum msp_i2s_id id; struct stedma40_chan_cfg *msp_i2s_dma_rx; struct stedma40_chan_cfg *msp_i2s_dma_tx; - int (*msp_i2s_init) (void); - int (*msp_i2s_exit) (void); }; #endif diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52ab93..4e07eec1270 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 051204fc461..e59c4ab71bc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -489,7 +489,7 @@ static bool __in_atomic_pool(void *start, size_t size) void *pool_start = pool->vaddr; void *pool_end = pool->vaddr + pool->size; - if (start < pool_start || start > pool_end) + if (start < pool_start || start >= pool_end) return false; if (end <= pool_end) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160618e..a8ee92da354 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d0451e84..c2fa21d0103 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index d861aa73299..28acb383e7d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -67,6 +67,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -105,6 +106,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -112,6 +114,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -174,8 +177,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* @@ -202,8 +207,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -217,7 +222,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f3486192063..c7092e6057c 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -38,6 +38,7 @@ config BLACKFIN select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP + select USE_GENERIC_SMP_HELPERS if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d3d7e64ca96..66cf00095b8 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -20,7 +20,6 @@ endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += -m elf32bfin -KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index dc3d144b4bb..9631598dcc5 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -18,6 +18,8 @@ #define raw_smp_processor_id() blackfin_core_id() extern void bfin_relocate_coreb_l1_mem(void); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1) asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 00bbe672b3b..a40151306b7 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS]; struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; -#define BFIN_IPI_TIMER 0 -#define BFIN_IPI_RESCHEDULE 1 -#define BFIN_IPI_CALL_FUNC 2 -#define BFIN_IPI_CPU_STOP 3 +enum ipi_message_type { + BFIN_IPI_TIMER, + BFIN_IPI_RESCHEDULE, + BFIN_IPI_CALL_FUNC, + BFIN_IPI_CALL_FUNC_SINGLE, + BFIN_IPI_CPU_STOP, +}; struct blackfin_flush_data { unsigned long start; @@ -60,35 +63,20 @@ struct blackfin_flush_data { void *secondary_stack; - -struct smp_call_struct { - void (*func)(void *info); - void *info; - int wait; - cpumask_t *waitmask; -}; - static struct blackfin_flush_data smp_flush_data; static DEFINE_SPINLOCK(stop_lock); -struct ipi_message { - unsigned long type; - struct smp_call_struct call_struct; -}; - /* A magic number - stress test shows this is safe for common cases */ #define BFIN_IPI_MSGQ_LEN 5 /* Simple FIFO buffer, overflow leads to panic */ -struct ipi_message_queue { - spinlock_t lock; +struct ipi_data { unsigned long count; - unsigned long head; /* head of the queue */ - struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN]; + unsigned long bits; }; -static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); +static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); static void ipi_cpu_stop(unsigned int cpu) { @@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info) blackfin_icache_flush_range(fdata->start, fdata->end); } -static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) -{ - int wait; - void (*func)(void *info); - void *info; - func = msg->call_struct.func; - info = msg->call_struct.info; - wait = msg->call_struct.wait; - func(info); - if (wait) { -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * 'wait' usually means synchronization between CPUs. - * Invalidate D cache in case shared data was changed - * by func() to ensure cache coherence. - */ - resync_core_dcache(); -#endif - cpumask_clear_cpu(cpu, msg->call_struct.waitmask); - } -} - /* Use IRQ_SUPPLE_0 to request reschedule. * When returning from interrupt to user space, * there is chance to reschedule */ @@ -172,152 +138,95 @@ void ipi_timer(void) static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { - struct ipi_message *msg; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; unsigned int cpu = smp_processor_id(); - unsigned long flags; + unsigned long pending; + unsigned long msg; platform_clear_ipi(cpu, IRQ_SUPPLE_1); - msg_queue = &__get_cpu_var(ipi_msg_queue); - - spin_lock_irqsave(&msg_queue->lock, flags); - - while (msg_queue->count) { - msg = &msg_queue->ipi_message[msg_queue->head]; - switch (msg->type) { - case BFIN_IPI_TIMER: - ipi_timer(); - break; - case BFIN_IPI_RESCHEDULE: - scheduler_ipi(); - break; - case BFIN_IPI_CALL_FUNC: - ipi_call_function(cpu, msg); - break; - case BFIN_IPI_CPU_STOP: - ipi_cpu_stop(cpu); - break; - default: - printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", - cpu, msg->type); - break; - } - msg_queue->head++; - msg_queue->head %= BFIN_IPI_MSGQ_LEN; - msg_queue->count--; + bfin_ipi_data = &__get_cpu_var(bfin_ipi); + + while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) { + msg = 0; + do { + msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); + switch (msg) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; + case BFIN_IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case BFIN_IPI_CALL_FUNC_SINGLE: + generic_smp_call_function_single_interrupt(); + break; + + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + } + } while (msg < BITS_PER_LONG); + + smp_mb(); } - spin_unlock_irqrestore(&msg_queue->lock, flags); return IRQ_HANDLED; } -static void ipi_queue_init(void) +static void bfin_ipi_init(void) { unsigned int cpu; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_init(&msg_queue->lock); - msg_queue->count = 0; - msg_queue->head = 0; + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + bfin_ipi_data->bits = 0; + bfin_ipi_data->count = 0; } } -static inline void smp_send_message(cpumask_t callmap, unsigned long type, - void (*func) (void *info), void *info, int wait) +void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) { unsigned int cpu; - struct ipi_message_queue *msg_queue; - struct ipi_message *msg; - unsigned long flags, next_msg; - cpumask_t waitmask; /* waitmask is shared by all cpus */ - - cpumask_copy(&waitmask, &callmap); - for_each_cpu(cpu, &callmap) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_irqsave(&msg_queue->lock, flags); - if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { - next_msg = (msg_queue->head + msg_queue->count) - % BFIN_IPI_MSGQ_LEN; - msg = &msg_queue->ipi_message[next_msg]; - msg->type = type; - if (type == BFIN_IPI_CALL_FUNC) { - msg->call_struct.func = func; - msg->call_struct.info = info; - msg->call_struct.wait = wait; - msg->call_struct.waitmask = &waitmask; - } - msg_queue->count++; - } else - panic("IPI message queue overflow\n"); - spin_unlock_irqrestore(&msg_queue->lock, flags); + struct ipi_data *bfin_ipi_data; + unsigned long flags; + + local_irq_save(flags); + + for_each_cpu(cpu, cpumask) { + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + smp_mb(); + set_bit(msg, &bfin_ipi_data->bits); + bfin_ipi_data->count++; platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } - if (wait) { - while (!cpumask_empty(&waitmask)) - blackfin_dcache_invalidate_range( - (unsigned long)(&waitmask), - (unsigned long)(&waitmask)); -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * Invalidate D cache in case shared data was changed by - * other processors to ensure cache coherence. - */ - resync_core_dcache(); -#endif - } + local_irq_restore(flags); } -int smp_call_function(void (*func)(void *info), void *info, int wait) +void arch_send_call_function_single_ipi(int cpu) { - cpumask_t callmap; - - preempt_disable(); - cpumask_copy(&callmap, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &callmap); - if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - preempt_enable(); - - return 0; + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE); } -EXPORT_SYMBOL_GPL(smp_call_function); -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - unsigned int cpu = cpuid; - cpumask_t callmap; - - if (cpu_is_offline(cpu)) - return 0; - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - return 0; + send_ipi(mask, BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { - cpumask_t callmap; - /* simply trigger an ipi */ - - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); + send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE); return; } void smp_send_msg(const struct cpumask *mask, unsigned long type) { - smp_send_message(*mask, type, NULL, NULL, 0); + send_ipi(mask, type); } void smp_timer_broadcast(const struct cpumask *mask) @@ -333,7 +242,7 @@ void smp_send_stop(void) cpumask_copy(&callmap, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &callmap); if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); + send_ipi(&callmap, BFIN_IPI_CPU_STOP); preempt_enable(); @@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void) void __init smp_prepare_cpus(unsigned int max_cpus) { platform_prepare_cpus(max_cpus); - ipi_queue_init(); + bfin_ipi_init(); platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0); platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1); } diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index a1e9d69a9c9..584b93674ea 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf, if (*offset) return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val < oprofile_min_interval) oprofile_hw_interval = oprofile_min_interval; @@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0) return -EINVAL; @@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 7f2739e03e7..0d3d63afa76 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2008,6 +2008,7 @@ __init int intel_pmu_init(void) break; case 28: /* Atom */ + case 54: /* Cedariew */ memcpy(hw_cache_event_ids, atom_hw_cache_event_ids, sizeof(hw_cache_event_ids)); diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 520b4265fcd..da02e9cc375 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void) * to have an operational LBR which can freeze * on PMU interrupt */ - if (boot_cpu_data.x86_mask < 10) { + if (boot_cpu_data.x86_model == 28 + && boot_cpu_data.x86_mask < 10) { pr_cont("LBR disabled due to erratum"); return; } diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 4873e62db6a..9e5bcf1e237 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, if (do_microcode_update(buf, len) == 0) ret = (ssize_t)len; + if (ret > 0) + perf_check_microcode(); + mutex_unlock(µcode_mutex); put_online_cpus(); diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index e498b18f010..9fc9aa7ac70 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -318,7 +318,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x10) { u8 edge_irr = s->irr & ~s->elcr; int i; - bool found; + bool found = false; struct kvm_vcpu *vcpu; s->init4 = val & 1; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c00f03de1b7..b1eb202ee76 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3619,6 +3619,7 @@ static void seg_setup(int seg) static int alloc_apic_access_page(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3633,7 +3634,13 @@ static int alloc_apic_access_page(struct kvm *kvm) if (r) goto out; - kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00); + page = gfn_to_page(kvm, 0xfee00); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.apic_access_page = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -3641,6 +3648,7 @@ out: static int alloc_identity_pagetable(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3656,8 +3664,13 @@ static int alloc_identity_pagetable(struct kvm *kvm) if (r) goto out; - kvm->arch.ept_identity_pagetable = gfn_to_page(kvm, - kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.ept_identity_pagetable = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -6575,7 +6588,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) /* Exposing INVPCID only when PCID is exposed */ best = kvm_find_cpuid_entry(vcpu, 0x7, 0); if (vmx_invpcid_supported() && - best && (best->ecx & bit(X86_FEATURE_INVPCID)) && + best && (best->ebx & bit(X86_FEATURE_INVPCID)) && guest_cpuid_has_pcid(vcpu)) { exec_control |= SECONDARY_EXEC_ENABLE_INVPCID; vmcs_write32(SECONDARY_VM_EXEC_CONTROL, @@ -6585,7 +6598,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control); if (best) - best->ecx &= ~bit(X86_FEATURE_INVPCID); + best->ebx &= ~bit(X86_FEATURE_INVPCID); } } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 148ed666e31..2966c847d48 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5113,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) !kvm_event_needs_reinjection(vcpu); } -static void vapic_enter(struct kvm_vcpu *vcpu) +static int vapic_enter(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct page *page; if (!apic || !apic->vapic_addr) - return; + return 0; page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); + if (is_error_page(page)) + return -EFAULT; vcpu->arch.apic->vapic_page = page; + return 0; } static void vapic_exit(struct kvm_vcpu *vcpu) @@ -5430,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) } vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); - vapic_enter(vcpu); + r = vapic_enter(vcpu); + if (r) { + srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); + return r; + } r = 1; while (r > 0) { |