Merge branch 'perf/urgent' into perf/core

Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/perf.h tools/perf/util/top.h Merge reason: resolve these cherry-picking conflicts. Signed-off-by: Ingo Molnar <mingo@elte.hu>
author: Ingo Molnar <mingo@elte.hu> 2012-03-05 09:20:08 +0100
committer: Ingo Molnar <mingo@elte.hu> 2012-03-05 09:20:08 +0100
commit: 737f24bda723fdf89ecaacb99fa2bf5683c32799 (patch)
tree: 35495fff3e9956679cb5468e74e6814c8e44ee66 /arch
parent: 8eedce996556d7d06522cd3a0e6069141c8dffe0 (diff)
parent: b7c924274c456499264d1cfa3d44063bb11eb5db (diff)
202 files changed, 1681 insertions, 1954 deletions
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 63d7578856c..a1dd2ee8375 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -29,6 +29,7 @@
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		cpu-offset = <0x8000>;
 		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 1a1d7023b69..825d2957da0 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -46,11 +46,11 @@
 	};
 
 	serial@70006200 {
-		status = "disable";
+		clock-frequency = <216000000>;
 	};
 
 	serial@70006300 {
-		clock-frequency = <216000000>;
+		status = "disable";
 	};
 
 	serial@70006400 {
@@ -60,7 +60,7 @@
 	sdhci@c8000000 {
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	sdhci@c8000200 {
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13eb..fb1f1cfce60 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047..ff3ad224482 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095d46d..23371b17b23 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca..c1821385abf 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613..cb8d638924f 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 5d3ed7e3856..314d4664eae 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	unsigned long addr)
 {
 	pgtable_page_dtor(pte);
-	tlb_add_flush(tlb, addr);
+
+	/*
+	 * With the classic ARM MMU, a pte page has two corresponding pmd
+	 * entries, each covering 1MB.
+	 */
+	addr &= PMD_MASK;
+	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+	tlb_add_flush(tlb, addr + SZ_1M);
+
 	tlb_remove_page(tlb, pte);
 }
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3a456c6c700..be16a48007b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -790,7 +790,7 @@ __kuser_cmpxchg64:				@ 0xffff0f60
 	smp_dmb	arm
 	rsbs	r0, r3, #0			@ set returned val and C flag
 	ldmfd	sp!, {r4, r5, r6, r7}
-	bx	lr
+	usr_ret	lr
 
 #elif !defined(CONFIG_SMP)
 
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 460bbbb6b88..6933244c68f 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };
 
 /*
@@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };
 
 /*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e1d5e1929fb..ede6443c34d 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target,
 {
 	int ret;
 	struct thread_info *thread = task_thread_info(target);
-	struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+	struct vfp_hard_struct new_vfp;
 	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
 	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
 
+	vfp_sync_hwstate(thread);
+	new_vfp = thread->vfpstate.hard;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &new_vfp.fpregs,
 				  user_fpregs_offset,
@@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	vfp_sync_hwstate(thread);
-	thread->vfpstate.hard = new_vfp;
 	vfp_flush_hwstate(thread);
+	thread->vfpstate.hard = new_vfp;
 
 	return 0;
 }
@@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 0340224cf73..9e617bd4a14 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
+	vfp_flush_hwstate(thread);
+
 	/*
 	 * Copy the floating point registers. There can be unused
 	 * registers see asm/hwcap.h for details.
@@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
 	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
 
-	if (!err)
-		vfp_flush_hwstate(thread);
-
 	return err ? -EFAULT : 0;
 }
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 4285daa077b..7a79b24597b 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 99a57270250..f84dfe67724 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err)
 {
 	struct thread_info *thread = current_thread_info();
 	int ret;
+	enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
 
 	oops_enter();
 
@@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err)
 	console_verbose();
 	bust_spinlocks(1);
 	if (!user_mode(regs))
-		report_bug(regs->ARM_pc, regs);
+		bug_type = report_bug(regs->ARM_pc, regs);
+	if (bug_type != BUG_TRAP_TYPE_NONE)
+		str = "Oops - BUG";
 	ret = __die(str, err, thread, regs);
 
 	if (regs && kexec_should_crash(thread->task))
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 1e19691e040..43a31fb0631 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -10,6 +10,7 @@
 #include <asm/page.h>
 	
 #define PROC_INFO							\
+	. = ALIGN(4);							\
 	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec2b09..97676bdae99 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6d26b..5a24f0b4554 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {}
  *  CF/IDE
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
-	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
 	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 
 static struct at91_cf_data cf0_data;
@@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	if (data->flags & AT91_CF_TRUE_IDE)
 #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
 		pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
-		pdev->name = "at91_ide";
 #else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
 #endif
 	else
 		pdev->name = "at91_cf";
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index fc59cbdb0e3..1e28bed8f42 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 7b46b278702..366a7765635 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  Compact Flash (PCMCIA or IDE)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
-    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 
 static struct at91_cf_data cf0_data;
 
@@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
 	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
 
-	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
 	platform_device_register(pdev);
 }
 #else
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index eb18a70fa64..175e1fdd9fe 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -18,6 +18,35 @@
 
 #include <mach/cpu.h>
 
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+	/* Setup register */
+	u8 ncs_read_setup;
+	u8 nrd_setup;
+	u8 ncs_write_setup;
+	u8 nwe_setup;
+
+	/* Pulse register */
+	u8 ncs_read_pulse;
+	u8 nrd_pulse;
+	u8 ncs_write_pulse;
+	u8 nwe_pulse;
+
+	/* Cycle register */
+	u16 read_cycle;
+	u16 write_cycle;
+
+	/* Mode register */
+	u32 mode;
+	u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
 #define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
 #define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
 #define			AT91_SMC_NWESETUP_(x)	((x) << 0)
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 8294783b679..99a0a1d2b7d 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -2,6 +2,7 @@
  * linux/arch/arm/mach-at91/sam9_smc.c
  *
  * Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,7 +23,22 @@
 
 static void __iomem *smc_base_addr[2];
 
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	__raw_writel(config->mode
+		   | AT91_SMC_TDF_(config->tdf_cycles),
+		   base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+					struct sam9_smc_config *config)
 {
 
 	/* Setup register */
@@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con
 		   base + AT91_SMC_CYCLE);
 
 	/* Mode register */
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
+	sam9_smc_cs_write_mode(base, config);
 }
 
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+					struct sam9_smc_config *config)
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
 
+static void sam9_smc_cs_read_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+	config->mode = (val & ~AT91_SMC_NWECYCLE);
+	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val;
+
+	/* Setup register */
+	val = __raw_readl(base + AT91_SMC_SETUP);
+
+	config->nwe_setup = val & AT91_SMC_NWESETUP;
+	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+	/* Pulse register */
+	val = __raw_readl(base + AT91_SMC_PULSE);
+
+	config->nwe_setup = val & AT91_SMC_NWEPULSE;
+	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+	/* Cycle register */
+	val = __raw_readl(base + AT91_SMC_CYCLE);
+
+	config->write_cycle = val & AT91_SMC_NWECYCLE;
+	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+	/* Mode register */
+	sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
 void __init at91sam9_ioremap_smc(int id, u32 addr)
 {
 	if (id > 1) {
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index 039c5ce17ae..3e52dcd4a59 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -8,27 +8,4 @@
  * published by the Free Software Foundation.
  */
 
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
 extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 9e5e7552498..45c97b1ee9b 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING")
 	.init_early = bcmring_init_early,
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
-	.init_machine = bcmring_init_machine
+	.init_machine = bcmring_init_machine,
 	.restart = bcmring_restart,
 MACHINE_END
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 1a1a27dd565..1024396797e 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -33,17 +33,11 @@
 
 #include <mach/timer.h>
 
-#include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
 #include <linux/sched.h>
 #include <mach/dma.h>
 
-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
 /* ---- Public Variables ------------------------------------------------- */
 
 /* ---- Private Constants and Types -------------------------------------- */
@@ -53,24 +47,12 @@
 #define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
 #define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
 
-#define DMA_MAP_DEBUG   0
-
-#if DMA_MAP_DEBUG
-#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
-#else
-#   define  DMA_MAP_PRINT(fmt, args...)
-#endif
 
 /* ---- Private Variables ------------------------------------------------ */
 
 static DMA_Global_t gDMA;
 static struct proc_dir_entry *gDmaDir;
 
-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
 #include "dma_device.c"
 
 /* ---- Private Function Prototypes -------------------------------------- */
@@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
 
 /****************************************************************************/
 /**
-*   Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
-				  int count, int *eof, void *data)
-{
-	int len = 0;
-
-	len += sprintf(buf + len, "dma_map_mem statistics\n");
-	len +=
-	    sprintf(buf + len, "coherent: %d\n",
-		    atomic_read(&gDmaStatMemTypeCoherent));
-	len +=
-	    sprintf(buf + len, "kmalloc:  %d\n",
-		    atomic_read(&gDmaStatMemTypeKmalloc));
-	len +=
-	    sprintf(buf + len, "vmalloc:  %d\n",
-		    atomic_read(&gDmaStatMemTypeVmalloc));
-	len +=
-	    sprintf(buf + len, "user:     %d\n",
-		    atomic_read(&gDmaStatMemTypeUser));
-
-	return len;
-}
-
-/****************************************************************************/
-/**
 *   Displays information for /proc/dma/channels
 */
 /****************************************************************************/
@@ -846,8 +800,6 @@ int dma_init(void)
 				       dma_proc_read_channels, NULL);
 		create_proc_read_entry("devices", 0, gDmaDir,
 				       dma_proc_read_devices, NULL);
-		create_proc_read_entry("mem-type", 0, gDmaDir,
-				       dma_proc_read_mem_type, NULL);
 	}
 
 out:
@@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for.
 }
 
 EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-*   Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
-	memset(memMap, 0, sizeof(*memMap));
-
-	sema_init(&memMap->lock, 1);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-*   Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
-	down(&memMap->lock);	/* Just being paranoid */
-
-	/* Free up any allocated memory */
-
-	up(&memMap->lock);
-	memset(memMap, 0, sizeof(*memMap));
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and categorizes it.
-*
-*   @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
-	unsigned long addrVal = (unsigned long)addr;
-
-	if (addrVal >= CONSISTENT_BASE) {
-		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
-		/* dma_alloc_xxx pages are physically and virtually contiguous */
-
-		return DMA_MEM_TYPE_DMA;
-	}
-
-	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
-	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
-	/* Right now, nobody cares about this particular classification, so we ignore it. */
-
-	if (is_vmalloc_addr(addr)) {
-		/* Address comes from the vmalloc'd region. Pages are virtually */
-		/* contiguous but NOT physically contiguous */
-
-		return DMA_MEM_TYPE_VMALLOC;
-	}
-
-	if (addrVal >= PAGE_OFFSET) {
-		/* PAGE_OFFSET is typically 0xC0000000 */
-
-		/* kmalloc'd pages are physically contiguous */
-
-		return DMA_MEM_TYPE_KMALLOC;
-	}
-
-	return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and determines if we support DMA'ing to/from
-*   that type of memory.
-*
-*   @return boolean -
-*               return value != 0 means dma supported
-*               return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
-	DMA_MemType_t memType = dma_mem_type(addr);
-
-	return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-	    || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
-	    || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		  enum dma_data_direction dir	/* Direction that the mapping will be going */
-    ) {
-	int rc;
-
-	down(&memMap->lock);
-
-	DMA_MAP_PRINT("memMap: %p\n", memMap);
-
-	if (memMap->inUse) {
-		printk(KERN_ERR "%s: memory map %p is already being used\n",
-		       __func__, memMap);
-		rc = -EBUSY;
-		goto out;
-	}
-
-	memMap->inUse = 1;
-	memMap->dir = dir;
-	memMap->numRegionsUsed = 0;
-
-	rc = 0;
-
-out:
-
-	DMA_MAP_PRINT("returning %d", rc);
-
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-*   Adds a segment of memory to a memory map. Each segment is both
-*   physically and virtually contiguous.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-			       DMA_Region_t *region,	/* Region that the segment belongs to */
-			       void *virtAddr,	/* Virtual address of the segment being added */
-			       dma_addr_t physAddr,	/* Physical address of the segment being added */
-			       size_t numBytes	/* Number of bytes of the segment being added */
-    ) {
-	DMA_Segment_t *segment;
-
-	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
-		      physAddr, numBytes);
-
-	/* Sanity check */
-
-	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
-	    || (((unsigned long)virtAddr + numBytes)) >
-	    ((unsigned long)region->virtAddr + region->numBytes)) {
-		printk(KERN_ERR
-		       "%s: virtAddr %p is outside region @ %p len: %d\n",
-		       __func__, virtAddr, region->virtAddr, region->numBytes);
-		return -EINVAL;
-	}
-
-	if (region->numSegmentsUsed > 0) {
-		/* Check to see if this segment is physically contiguous with the previous one */
-
-		segment = &region->segment[region->numSegmentsUsed - 1];
-
-		if ((segment->physAddr + segment->numBytes) == physAddr) {
-			/* It is - just add on to the end */
-
-			DMA_MAP_PRINT("appending %d bytes to last segment\n",
-				      numBytes);
-
-			segment->numBytes += numBytes;
-
-			return 0;
-		}
-	}
-
-	/* Reallocate to hold more segments, if required. */
-
-	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
-		DMA_Segment_t *newSegment;
-		size_t oldSize =
-		    region->numSegmentsAllocated * sizeof(*newSegment);
-		int newAlloc = region->numSegmentsAllocated + 4;
-		size_t newSize = newAlloc * sizeof(*newSegment);
-
-		newSegment = kmalloc(newSize, GFP_KERNEL);
-		if (newSegment == NULL) {
-			return -ENOMEM;
-		}
-		memcpy(newSegment, region->segment, oldSize);
-		memset(&((uint8_t *) newSegment)[oldSize], 0,
-		       newSize - oldSize);
-		kfree(region->segment);
-
-		region->numSegmentsAllocated = newAlloc;
-		region->segment = newSegment;
-	}
-
-	segment = &region->segment[region->numSegmentsUsed];
-	region->numSegmentsUsed++;
-
-	segment->virtAddr = virtAddr;
-	segment->physAddr = physAddr;
-	segment->numBytes = numBytes;
-
-	DMA_MAP_PRINT("returning success\n");
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to a memory map. Each region is virtually
-*   contiguous, but not necessarily physically contiguous.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		       void *mem,	/* Virtual address that we want to get a map of */
-		       size_t numBytes	/* Number of bytes being mapped */
-    ) {
-	unsigned long addr = (unsigned long)mem;
-	unsigned int offset;
-	int rc = 0;
-	DMA_Region_t *region;
-	dma_addr_t physAddr;
-
-	down(&memMap->lock);
-
-	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
-	if (!memMap->inUse) {
-		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
-		       __func__);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	/* Reallocate to hold more regions. */
-
-	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
-		DMA_Region_t *newRegion;
-		size_t oldSize =
-		    memMap->numRegionsAllocated * sizeof(*newRegion);
-		int newAlloc = memMap->numRegionsAllocated + 4;
-		size_t newSize = newAlloc * sizeof(*newRegion);
-
-		newRegion = kmalloc(newSize, GFP_KERNEL);
-		if (newRegion == NULL) {
-			rc = -ENOMEM;
-			goto out;
-		}
-		memcpy(newRegion, memMap->region, oldSize);
-		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
-		kfree(memMap->region);
-
-		memMap->numRegionsAllocated = newAlloc;
-		memMap->region = newRegion;
-	}
-
-	region = &memMap->region[memMap->numRegionsUsed];
-	memMap->numRegionsUsed++;
-
-	offset = addr & ~PAGE_MASK;
-
-	region->memType = dma_mem_type(mem);
-	region->virtAddr = mem;
-	region->numBytes = numBytes;
-	region->numSegmentsUsed = 0;
-	region->numLockedPages = 0;
-	region->lockedPages = NULL;
-
-	switch (region->memType) {
-	case DMA_MEM_TYPE_VMALLOC:
-		{
-			atomic_inc(&gDmaStatMemTypeVmalloc);
-
-			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
-			/* vmalloc'd pages are not physically contiguous */
-
-			rc = -EINVAL;
-			break;
-		}
-
-	case DMA_MEM_TYPE_KMALLOC:
-		{
-			atomic_inc(&gDmaStatMemTypeKmalloc);
-
-			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
-			/* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-			physAddr =
-			    dma_map_single(NULL, mem, numBytes, memMap->dir);
-			rc = dma_map_add_segment(memMap, region, mem, physAddr,
-						 numBytes);
-#else
-			rc = -EINVAL;
-#endif
-			break;
-		}
-
-	case DMA_MEM_TYPE_DMA:
-		{
-			/* dma_alloc_xxx pages are physically contiguous */
-
-			atomic_inc(&gDmaStatMemTypeCoherent);
-
-			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
-			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
-						memMap->dir);
-			rc = dma_map_add_segment(memMap, region, mem, physAddr,
-						 numBytes);
-			break;
-		}
-
-	case DMA_MEM_TYPE_USER:
-		{
-			size_t firstPageOffset;
-			size_t firstPageSize;
-			struct page **pages;
-			struct task_struct *userTask;
-
-			atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
-			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
-			/* must have been previously called. */
-
-			if (memMap->userTask == NULL) {
-				printk(KERN_ERR
-				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
-				       __func__);
-				return -EINVAL;
-			}
-
-			/* User pages need to be locked. */
-
-			firstPageOffset =
-			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
-			firstPageSize = PAGE_SIZE - firstPageOffset;
-
-			region->numLockedPages = (firstPageOffset
-						  + region->numBytes +
-						  PAGE_SIZE - 1) / PAGE_SIZE;
-			pages =
-			    kmalloc(region->numLockedPages *
-				    sizeof(struct page *), GFP_KERNEL);
-
-			if (pages == NULL) {
-				region->numLockedPages = 0;
-				return -ENOMEM;
-			}
-
-			userTask = memMap->userTask;
-
-			down_read(&userTask->mm->mmap_sem);
-			rc = get_user_pages(userTask,	/* task */
-					    userTask->mm,	/* mm */
-					    (unsigned long)region->virtAddr,	/* start */
-					    region->numLockedPages,	/* len */
-					    memMap->dir == DMA_FROM_DEVICE,	/* write */
-					    0,	/* force */
-					    pages,	/* pages (array of pointers to page) */
-					    NULL);	/* vmas */
-			up_read(&userTask->mm->mmap_sem);
-
-			if (rc != region->numLockedPages) {
-				kfree(pages);
-				region->numLockedPages = 0;
-
-				if (rc >= 0) {
-					rc = -EINVAL;
-				}
-			} else {
-				uint8_t *virtAddr = region->virtAddr;
-				size_t bytesRemaining;
-				int pageIdx;
-
-				rc = 0;	/* Since get_user_pages returns +ve number */
-
-				region->lockedPages = pages;
-
-				/* We've locked the user pages. Now we need to walk them and figure */
-				/* out the physical addresses. */
-
-				/* The first page may be partial */
-
-				dma_map_add_segment(memMap,
-						    region,
-						    virtAddr,
-						    PFN_PHYS(page_to_pfn
-							     (pages[0])) +
-						    firstPageOffset,
-						    firstPageSize);
-
-				virtAddr += firstPageSize;
-				bytesRemaining =
-				    region->numBytes - firstPageSize;
-
-				for (pageIdx = 1;
-				     pageIdx < region->numLockedPages;
-				     pageIdx++) {
-					size_t bytesThisPage =
-					    (bytesRemaining >
-					     PAGE_SIZE ? PAGE_SIZE :
-					     bytesRemaining);
-
-					DMA_MAP_PRINT
-					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
-					     pageIdx, pages[pageIdx],
-					     page_to_pfn(pages[pageIdx]),
-					     PFN_PHYS(page_to_pfn
-						      (pages[pageIdx])));
-
-					dma_map_add_segment(memMap,
-							    region,
-							    virtAddr,
-							    PFN_PHYS(page_to_pfn
-								     (pages
-								      [pageIdx])),
-							    bytesThisPage);
-
-					virtAddr += bytesThisPage;
-					bytesRemaining -= bytesThisPage;
-				}
-			}
-#else
-			printk(KERN_ERR
-			       "%s: User mode pages are not yet supported\n",
-			       __func__);
-
-			/* user pages are not physically contiguous */
-
-			rc = -EINVAL;
-#endif
-			break;
-		}
-
-	default:
-		{
-			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
-			       __func__, region->memType);
-
-			rc = -EINVAL;
-			break;
-		}
-	}
-
-	if (rc != 0) {
-		memMap->numRegionsUsed--;
-	}
-
-out:
-
-	DMA_MAP_PRINT("returning %d\n", rc);
-
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		void *mem,	/* Virtual address that we want to get a map of */
-		size_t numBytes,	/* Number of bytes being mapped */
-		enum dma_data_direction dir	/* Direction that the mapping will be going */
-    ) {
-	int rc;
-
-	rc = dma_map_start(memMap, dir);
-	if (rc == 0) {
-		rc = dma_map_add_region(memMap, mem, numBytes);
-		if (rc < 0) {
-			/* Since the add fails, this function will fail, and the caller won't */
-			/* call unmap, so we need to do it here. */
-
-			dma_unmap(memMap, 0);
-		}
-	}
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-*   Setup a descriptor ring for a given memory map.
-*
-*   It is assumed that the descriptor ring has already been initialized, and
-*   this routine will only reallocate a new descriptor ring if the existing
-*   one is too small.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
-				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
-				   dma_addr_t devPhysAddr	/* Physical address of device */
-    ) {
-	int rc;
-	int numDescriptors;
-	DMA_DeviceAttribute_t *devAttr;
-	DMA_Region_t *region;
-	DMA_Segment_t *segment;
-	dma_addr_t srcPhysAddr;
-	dma_addr_t dstPhysAddr;
-	int regionIdx;
-	int segmentIdx;
-
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-	down(&memMap->lock);
-
-	/* Figure out how many descriptors we need */
-
-	numDescriptors = 0;
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			if (memMap->dir == DMA_TO_DEVICE) {
-				srcPhysAddr = segment->physAddr;
-				dstPhysAddr = devPhysAddr;
-			} else {
-				srcPhysAddr = devPhysAddr;
-				dstPhysAddr = segment->physAddr;
-			}
-
-			rc =
-			     dma_calculate_descriptor_count(dev, srcPhysAddr,
-							    dstPhysAddr,
-							    segment->
-							    numBytes);
-			if (rc < 0) {
-				printk(KERN_ERR
-				       "%s: dma_calculate_descriptor_count failed: %d\n",
-				       __func__, rc);
-				goto out;
-			}
-			numDescriptors += rc;
-		}
-	}
-
-	/* Adjust the size of the ring, if it isn't big enough */
-
-	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
-		dma_free_descriptor_ring(&devAttr->ring);
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring failed: %d\n",
-			       __func__, rc);
-			goto out;
-		}
-	} else {
-		rc =
-		     dma_init_descriptor_ring(&devAttr->ring,
-					      numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_init_descriptor_ring failed: %d\n",
-			       __func__, rc);
-			goto out;
-		}
-	}
-
-	/* Populate the descriptors */
-
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			if (memMap->dir == DMA_TO_DEVICE) {
-				srcPhysAddr = segment->physAddr;
-				dstPhysAddr = devPhysAddr;
-			} else {
-				srcPhysAddr = devPhysAddr;
-				dstPhysAddr = segment->physAddr;
-			}
-
-			rc =
-			     dma_add_descriptors(&devAttr->ring, dev,
-						 srcPhysAddr, dstPhysAddr,
-						 segment->numBytes);
-			if (rc < 0) {
-				printk(KERN_ERR
-				       "%s: dma_add_descriptors failed: %d\n",
-				       __func__, rc);
-				goto out;
-			}
-		}
-	}
-
-	rc = 0;
-
-out:
-
-	up(&memMap->lock);
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-	      int dirtied	/* non-zero if any of the pages were modified */
-    ) {
-
-	int rc = 0;
-	int regionIdx;
-	int segmentIdx;
-	DMA_Region_t *region;
-	DMA_Segment_t *segment;
-
-	down(&memMap->lock);
-
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			switch (region->memType) {
-			case DMA_MEM_TYPE_VMALLOC:
-				{
-					printk(KERN_ERR
-					       "%s: vmalloc'd pages are not yet supported\n",
-					       __func__);
-					rc = -EINVAL;
-					goto out;
-				}
-
-			case DMA_MEM_TYPE_KMALLOC:
-				{
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-					dma_unmap_single(NULL,
-							 segment->physAddr,
-							 segment->numBytes,
-							 memMap->dir);
-#endif
-					break;
-				}
-
-			case DMA_MEM_TYPE_DMA:
-				{
-					dma_sync_single_for_cpu(NULL,
-								segment->
-								physAddr,
-								segment->
-								numBytes,
-								memMap->dir);
-					break;
-				}
-
-			case DMA_MEM_TYPE_USER:
-				{
-					/* Nothing to do here. */
-
-					break;
-				}
-
-			default:
-				{
-					printk(KERN_ERR
-					       "%s: Unsupported memory type: %d\n",
-					       __func__, region->memType);
-					rc = -EINVAL;
-					goto out;
-				}
-			}
-
-			segment->virtAddr = NULL;
-			segment->physAddr = 0;
-			segment->numBytes = 0;
-		}
-
-		if (region->numLockedPages > 0) {
-			int pageIdx;
-
-			/* Some user pages were locked. We need to go and unlock them now. */
-
-			for (pageIdx = 0; pageIdx < region->numLockedPages;
-			     pageIdx++) {
-				struct page *page =
-				    region->lockedPages[pageIdx];
-
-				if (memMap->dir == DMA_FROM_DEVICE) {
-					SetPageDirty(page);
-				}
-				page_cache_release(page);
-			}
-			kfree(region->lockedPages);
-			region->numLockedPages = 0;
-			region->lockedPages = NULL;
-		}
-
-		region->memType = DMA_MEM_TYPE_NONE;
-		region->virtAddr = NULL;
-		region->numBytes = 0;
-		region->numSegmentsUsed = 0;
-	}
-	memMap->userTask = NULL;
-	memMap->numRegionsUsed = 0;
-	memMap->inUse = 0;
-
-out:
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 1f2c5319c05..72543781207 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -26,15 +26,9 @@
 /* ---- Include Files ---------------------------------------------------- */
 
 #include <linux/kernel.h>
-#include <linux/wait.h>
 #include <linux/semaphore.h>
 #include <csp/dmacHw.h>
 #include <mach/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
 
 /* ---- Constants and Types ---------------------------------------------- */
 
@@ -113,78 +107,6 @@ typedef struct {
 
 /****************************************************************************
 *
-*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-*   DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
-					/* off not being DMA'd. */
-
-typedef enum {
-	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
-	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
-	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
-	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
-	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
-	void *virtAddr;		/* Virtual address used for this segment */
-	dma_addr_t physAddr;	/* Physical address this segment maps to */
-	size_t numBytes;	/* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
-	DMA_MemType_t memType;
-	void *virtAddr;
-	size_t numBytes;
-
-	/* Each region (virtually contiguous) consists of one or more segments. Each */
-	/* segment is virtually and physically contiguous. */
-
-	int numSegmentsUsed;
-	int numSegmentsAllocated;
-	DMA_Segment_t *segment;
-
-	/* When a region corresponds to user memory, we need to lock all of the pages */
-	/* down before we can figure out the physical addresses. The lockedPage array contains */
-	/* the pages that were locked, and which subsequently need to be unlocked once the */
-	/* memory is unmapped. */
-
-	unsigned numLockedPages;
-	struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
-	int inUse;		/* Is this mapping currently being used? */
-	struct semaphore lock;	/* Acquired when using this structure */
-	enum dma_data_direction dir;	/* Direction this transfer is intended for */
-
-	/* In the event that we're mapping user memory, we need to know which task */
-	/* the memory is for, so that we can obtain the correct mm locks. */
-
-	struct task_struct *userTask;
-
-	int numRegionsUsed;
-	int numRegionsAllocated;
-	DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
-/****************************************************************************
-*
 *   The DMA_DeviceAttribute_t contains information which describes a
 *   particular DMA device (or peripheral).
 *
@@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
 
 /****************************************************************************/
 /**
-*   Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
-    );
-
-/****************************************************************************/
-/**
-*   Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
-    );
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and categorizes it.
-*
-*   @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-*   Sets the process (aka userTask) associated with a mem map. This is
-*   required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
-					     struct task_struct *task)
-{
-	memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and determines if we support DMA'ing to/from
-*   that type of memory.
-*
-*   @return boolean -
-*               return value != 0 means dma supported
-*               return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-*   Initializes a memory map for use. Since this function acquires a
-*   sempaphore within the memory map, it is VERY important that dma_unmap
-*   be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		  enum dma_data_direction dir	/* Direction that the mapping will be going */
-    );
-
-/****************************************************************************/
-/**
-*   Adds a segment of memory to a memory map.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		       void *mem,	/* Virtual address that we want to get a map of */
-		       size_t numBytes	/* Number of bytes being mapped */
-    );
-
-/****************************************************************************/
-/**
-*   Creates a descriptor ring from a memory mapping.
-*
-*   @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
-				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
-				   dma_addr_t devPhysAddr	/* Physical address of device */
-    );
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		void *addr,	/* Virtual address that we want to get a map of */
-		size_t count,	/* Number of bytes being mapped */
-		enum dma_data_direction dir	/* Direction that the mapping will be going */
-    );
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-	      int dirtied	/* non-zero if any of the pages were modified */
-    );
-
-/****************************************************************************/
-/**
 *   Initiates a transfer when the descriptors have already been setup.
 *
 *   This is a special case, and normally, the dma_transfer_xxx functions should
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6b22b543a83..d5088900af6 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -44,7 +44,7 @@
 #include <mach/aemif.h>
 #include <mach/spi.h>
 
-#define DA850_EVM_PHY_ID		"0:00"
+#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 346e1de2f5a..849311d3cb7 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,7 +54,7 @@ static inline int have_tvp7002(void)
 	return 0;
 }
 
-#define DM365_EVM_PHY_ID		"0:01"
+#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * A MAX-II CPLD is used for various board control functions.
  */
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a64b49cfedc..1247ecdcf75 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -40,7 +40,7 @@
 #include <mach/usb.h>
 #include <mach/aemif.h>
 
-#define DM644X_EVM_PHY_ID		"0:01"
+#define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 64017558860..872ac69fa04 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
-#define DM646X_EVM_PHY_ID		"0:01"
+#define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
  * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c4a16415d4..8d34f513d41 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define NEUROS_OSD2_PHY_ID		"0:01"
+#define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"
 #define LXT971_PHY_ID			0x001378e2
 #define LXT971_PHY_MASK			0xfffffff0
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e7c0c7c5349..45e815760a2 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -21,7 +21,7 @@
 #include <mach/da8xx.h>
 #include <mach/mux.h>
 
-#define HAWKBOARD_PHY_ID		"0:07"
+#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
 #define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
 #define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 0b136a831c5..31da3c5b2ba 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,7 +42,7 @@
 #include <mach/mux.h>
 #include <mach/usb.h>
 
-#define SFFSDR_PHY_ID		"0:01"
+#define SFFSDR_PHY_ID		"davinci_mdio-0:01"
 static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
 	/* U-Boot Environment: Block 0
 	 * UBL:                Block 1
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 0ed7fdb64ef..992c4c41018 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = {
 	.div_reg	= PLLDIV3,
 };
 
-static struct clk pll1_sysclk4 = {
-	.name		= "pll1_sysclk4",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
-	.name		= "pll1_sysclk5",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
-	.name		= "pll0_sysclk6",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
-	.name		= "pll1_sysclk7",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
 static struct clk i2c0_clk = {
 	.name		= "i2c0",
 	.parent		= &pll0_aux_clk,
@@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
 	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
 	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
-	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
-	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
-	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
-	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
 	CLK("watchdog",		NULL,		&timerp64_1_clk),
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dd1429ae640..bda7aca04ca 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -28,6 +28,7 @@
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
+#include <plat/ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
@@ -71,7 +72,7 @@ void __init dove_map_io(void)
  ****************************************************************************/
 void __init dove_ehci0_init(void)
 {
-	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 03dd4012043..d5fb44f16d3 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -32,6 +32,7 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x74),
 		.platform_data	= &pca953x_74_gpio_data,
-		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x75),
 		.platform_data	= &pca953x_75_gpio_data,
@@ -348,6 +348,8 @@ static void __init vision_init_machine(void)
 				"pca9539:74"))
 		pr_warn("cannot request interrupt gpio for pca9539:74\n");
 
+	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
 	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index a5823a7f249..13312ccb2d9 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -32,6 +32,7 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
 };
+#endif
 
 static struct clksrc_clk *sysclks[] = {
 	/* nothing here yet */
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 26a668b0d10..48af28566fa 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -32,12 +32,14 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
 	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
 };
+#endif
 
 static struct clk *clk_src_mpll_user_list[] = {
 	[0] = &clk_fin_mpll,
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5a8c42e9000..187287aa57a 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -30,6 +30,7 @@
 
 #include "common.h"
 
+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
 	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
 };
+#endif
 
 struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 85fa02767d6..e6b02fdf1b0 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,11 +15,13 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
 
 /*
  * The following lookup table is used to override device names when devices
@@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
 
 static void __init exynos4210_dt_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }
 
@@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4210_dt_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4210_dt_machine_init,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos4210_dt_compat,
+	.restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b895ec03110..435261f83f4 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = {
 		.lower_margin	= 1,
 		.hsync_len	= 48,
 		.vsync_len	= 3,
-		.xres		= 1280,
-		.yres		= 800,
+		.xres		= 1024,
+		.yres		= 600,
 		.refresh	= 60,
 	},
 	.max_bpp	= 24,
 	.default_bpp	= 16,
-	.virtual_x	= 1280,
-	.virtual_y	= 800,
+	.virtual_x	= 1024,
+	.virtual_y	= 2 * 600,
 };
 
 static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 37ac93e8d6d..0fc65ffde8f 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
-		.clk_frequency	= 21600000UL,
+		.clk_frequency	= 24000000UL,
 		.csi_data_align	= 32,
 	},
 };
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index a4f61a43c7b..e1901305177 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void)
 
 }
 
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = exynos4_pm_prepare;
 	pm_cpu_sleep = exynos4_cpu_suspend;
@@ -384,7 +384,9 @@ static void exynos4_pm_resume(void)
 
 	exynos4_restore_pll();
 
+#ifdef CONFIG_SMP
 	scu_enable(S5P_VA_SCU);
+#endif
 
 #ifdef CONFIG_CACHE_L2X0
 	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index cc15426787b..77d4852e19f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -27,6 +27,7 @@
 #include <plat/cache-feroceon-l2.h>
 #include <plat/mvsdio.h>
 #include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
 #include <plat/common.h>
 #include <plat/time.h>
 #include <plat/addr-map.h>
@@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
 void __init kirkwood_ehci_init(void)
 {
 	kirkwood_clk_ctrl |= CGC_USB0;
-	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
 }
 
 
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e8fda45c073..d5a0d1da2e0 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -31,314 +31,314 @@
 #define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP8_TW0_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1,   1 )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP9_TW0_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 0, 1,   1,   1,   1,   0 )
 
 #define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1,   0 )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 0, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 
 #define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
 #define MPP12_GPIO		MPP( 12, 0x0, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP12_TW1_SDA		MPP( 12, 0xd, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP14_AU_I2SDI		MPP( 14, 0xb, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1,   1 )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 1, 0, 0,   0,   0,   0,   1 )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP17_TW1_SCK		MPP( 17, 0xd, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 0, 0, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 1, 0, 0,   0,   1,   1,   1 )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1,   1 )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP27_AU_I2SDI		MPP( 27, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1,   1 )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 0, 0,   0,   1,   1,   1 )
 #define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 #define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 0, 0, 1,   1,   1,   1,   1 )
 
 #define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 1, 0, 1,   0,   0,   1,   1 )
-#define MPP36_TW1_SDA		MPP( 36, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 1, 1,   0,   0,   1,   1 )
-#define MPP37_TW1_SCK		MPP( 37, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 0, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1,   1 )
-#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP43_AU_I2SDI		MPP( 43, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 0, 0, 1,   0,   0,   1,   1 )
 #define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 0, 0,   0,   0,   1,   1 )
 #define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
 #define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1,   1 )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1,   0 )
-#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 0, 0,   0,   0,   0,   1 )
 #define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP_MAX			49
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 0cdd41004ad..a5dcf766a3f 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -19,6 +19,7 @@
 #include <mach/mv78xx0.h>
 #include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
 #include <plat/orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
@@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void)
  ****************************************************************************/
 void __init mv78xx0_ehci0_init(void)
 {
-	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
 }
 
 
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
index b61b5092712..3752302ae2e 100644
--- a/arch/arm/mach-mv78xx0/mpp.h
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -24,296 +24,296 @@
 #define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
 
 #define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 0, 1)
 #define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
 
 #define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 0, 1)
 #define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
 
 #define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 0, 0, 1)
 #define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
 
 #define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 0, 0, 1)
 #define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
 
 #define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 0, 1)
 #define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
 
 #define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 0, 1)
 #define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
 
 #define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 0, 1)
 #define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
 
 #define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 0, 1)
 #define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
 
 #define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 0, 0, 1)
 #define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
 
 #define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 0, 0, 1)
 #define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
 
 #define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 0, 0, 1)
 #define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
 
 #define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 0, 0, 1)
 #define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
 
 #define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 0, 1)
 #define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
 
 #define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 0, 1)
 #define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
 
 #define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 0, 1)
 #define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
 
 #define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 0, 0, 1)
 #define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
 
 #define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 0, 0, 1)
 #define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
 
 
 #define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 0, 1)
 #define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
 
 
 #define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 0, 1)
 #define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
 
 
 
 #define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 0, 1)
 #define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
 
 
 #define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 0, 0, 0)
 #define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
 
 
 
 #define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 0, 0, 0)
 #define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
 
 
 
 #define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 0, 0, 1)
 #define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
 
 
 
 #define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 0, 1)
 #define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
 
 
 #define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 0, 0, 1)
 #define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
 
 
 #define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 0, 1)
 #define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
 
 
 #define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 0, 0, 1)
 #define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
 
 
 #define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 0, 0, 1)
 #define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
 
 
 #define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 0, 0, 1)
 #define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
 
 #define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 0, 1)
 #define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
 
 #define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 0, 0, 1)
 #define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
 
 #define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 0, 1)
 #define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
 
 
 #define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 0, 1)
 #define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
 
 
 #define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 0, 1)
 #define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
 
 
 
 #define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 0, 1)
 #define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
 
 
 
 #define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 0, 1)
 #define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
 
 #define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 0, 1)
 #define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
 
 
 #define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 0, 1)
 #define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
 
 
 
 
 #define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 0, 1)
 #define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
 
 
 
 
 #define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 0, 0, 1)
 #define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
 
 
 
 #define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 0, 0, 1)
 #define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
 
 
 
 #define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 0, 1)
 #define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
 
 
 
 #define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 0, 0, 1)
 #define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
 
 
 
 #define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 0, 0, 1)
 #define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
 
 
 
 #define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 0, 0, 1)
 #define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
 
 
 
 #define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 0, 1)
 #define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
 
 
 #define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 0, 1)
 #define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
 
 
@@ -323,14 +323,14 @@
 
 
 #define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 0, 1)
 #define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
 
 
 
 #define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 0, 0, 1)
 #define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
 
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 41e6612ecba..d965da45160 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
 	default y
-	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
@@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2
 	select SERIAL_8250
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
@@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3
 	select SERIAL_8250
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
@@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
-	select REGULATOR_FIXED_VOLTAGE
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_OMAP4_PANDA
 	bool "OMAP4 Panda Board"
@@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA
 	depends on ARCH_OMAP4
 	select OMAP_PACKAGE_CBL
 	select OMAP_PACKAGE_CBS
-	select REGULATOR_FIXED_VOLTAGE
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fc9b238cbc1..bd76394ccaf 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -11,9 +11,9 @@ hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
 					  clkt_dpll.o clkt_clksel.o
-secure-common                          = omap-smc.o omap-secure.o
+secure-common				= omap-smc.o omap-secure.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 39fba9df17f..4e9071589bf 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -52,8 +52,9 @@
 #define ETH_KS8851_QUART		138
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD  63 /* Hotplug detect */
 #define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
 #define DLP_POWER_ON_GPIO	40
 
@@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void)
 }
 
 static struct gpio sdp4430_hdmi_gpios[] = {
-	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_hpd"   },
+	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
+	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
 };
 
 static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
@@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
 
 static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 {
-	gpio_free(HDMI_GPIO_LS_OE);
-	gpio_free(HDMI_GPIO_HPD);
+	gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
 }
 
 static struct nokia_dsi_panel_data dsi1_panel = {
@@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void)
 		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
 }
 
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+	.hpd_gpio = HDMI_GPIO_HPD,
+};
+
 static struct omap_dss_device sdp4430_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
@@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = {
 	.platform_enable = sdp4430_panel_enable_hdmi,
 	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
+	.data = &sdp4430_hdmi_data,
 };
 
 static struct picodlp_panel_data sdp4430_picodlp_pdata = {
@@ -808,7 +814,7 @@ static struct omap_dss_board_info sdp4430_dss_data = {
 	.default_device	= &sdp4430_lcd_device,
 };
 
-static void omap_4430sdp_display_init(void)
+static void __init omap_4430sdp_display_init(void)
 {
 	int r;
 
@@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void)
 		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
 	else
 		omap_hdmi_init(0);
+
+	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -841,7 +851,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
  #endif
 
-static void omap4_sdp4430_wifi_mux_init(void)
+static void __init omap4_sdp4430_wifi_mux_init(void)
 {
 	omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
 				OMAP_PIN_OFF_WAKEUPENABLE);
@@ -868,12 +878,17 @@ static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
 	.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
 };
 
-static void omap4_sdp4430_wifi_init(void)
+static void __init omap4_sdp4430_wifi_init(void)
 {
+	int ret;
+
 	omap4_sdp4430_wifi_mux_init();
-	if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
-		pr_err("Error setting wl12xx data\n");
-	platform_device_register(&omap_vwlan_device);
+	ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
+	if (ret)
+		pr_err("Error setting wl12xx data: %d\n", ret);
+	ret = platform_device_register(&omap_vwlan_device);
+	if (ret)
+		pr_err("Error registering wl12xx device: %d\n", ret);
 }
 
 static void __init omap_4430sdp_init(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e921e3be24a..d73316ed420 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -437,7 +437,7 @@ static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void cm_t35_init_usbh(void)
+static void  __init cm_t35_init_usbh(void)
 {
 	int err;
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index d5875606048..ad497620539 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -17,6 +17,7 @@
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include <plat/board.h>
@@ -102,6 +103,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap242x_boards_compat,
@@ -141,6 +143,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
@@ -160,6 +163,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 003fe34c934..c775bead149 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -617,6 +617,21 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
 	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
 };
 
+static void __init omap3_evm_wl12xx_init(void)
+{
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+	int ret;
+
+	/* WL12xx WLAN Init */
+	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
+	if (ret)
+		pr_err("error setting wl12xx data: %d\n", ret);
+	ret = platform_device_register(&omap3evm_wlan_regulator);
+	if (ret)
+		pr_err("error registering wl12xx device: %d\n", ret);
+#endif
+}
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
@@ -665,13 +680,7 @@ static void __init omap3_evm_init(void)
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
-
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-	/* WL12xx WLAN Init */
-	if (wl12xx_set_platform_data(&omap3evm_wlan_data))
-		pr_err("error setting wl12xx data\n");
-	platform_device_register(&omap3evm_wlan_regulator);
-#endif
+	omap3_evm_wl12xx_init();
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 30ad40db2cf..28fc271f703 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -51,8 +51,9 @@
 #define GPIO_HUB_NRESET		62
 #define GPIO_WIFI_PMENA		43
 #define GPIO_WIFI_IRQ		53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
 /* wl127x BT, FM, GPS connectivity chip */
 static int wl1271_gpios[] = {46, -1, -1};
@@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void)
 }
 
 static struct gpio panda_hdmi_gpios[] = {
-	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
+	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
 };
 
 static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
@@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
 
 static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
 {
-	gpio_free(HDMI_GPIO_LS_OE);
-	gpio_free(HDMI_GPIO_HPD);
+	gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
 }
 
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+	.hpd_gpio = HDMI_GPIO_HPD,
+};
+
 static struct omap_dss_device  omap4_panda_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
@@ -442,6 +447,7 @@ static struct omap_dss_device  omap4_panda_hdmi_device = {
 	.platform_enable = omap4_panda_panel_enable_hdmi,
 	.platform_disable = omap4_panda_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
+	.data = &omap4_panda_hdmi_data,
 };
 
 static struct omap_dss_device *omap4_panda_dss_devices[] = {
@@ -473,18 +479,24 @@ void omap4_panda_display_init(void)
 		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
 	else
 		omap_hdmi_init(0);
+
+	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 }
 
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
+	int ret;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, NULL, package);
 
-	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
-		pr_err("error setting wl12xx data\n");
+	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
+	if (ret)
+		pr_err("error setting wl12xx data: %d\n", ret);
 
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 8d7ce11cfea..c126461836a 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -296,8 +296,10 @@ static void enable_board_wakeup_source(void)
 
 void __init zoom_peripherals_init(void)
 {
-	if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
-		pr_err("error setting wl12xx data\n");
+	int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+
+	if (ret)
+		pr_err("error setting wl12xx data: %d\n", ret);
 
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 0b510ad01a0..283d11eae69 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 			break;
 	default:
 			pr_err("Invalid McSPI Revision value\n");
+			kfree(pdata);
 			return -EINVAL;
 	}
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 3c446d1a178..3677b1f58b8 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
 	u32 reg;
 	u16 control_i2c_1;
 
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
 	omap_mux_init_signal("hdmi_cec",
 			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
 	omap_mux_init_signal("hdmi_ddc_scl",
 			OMAP_PIN_INPUT_PULLUP);
 	omap_mux_init_signal("hdmi_ddc_sda",
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 130034bf01d..dfffbbf4c00 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 
 	case GPMC_CONFIG_DEV_SIZE:
 		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* clear 2 target bits */
+		regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
+
+		/* set the proper value */
 		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+
 		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
 		break;
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index bd844af13af..b40c2889529 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
 {
 	u32 reg;
 
-	if (mmc->slots[0].internal_clock) {
-		reg = omap_ctrl_readl(control_devconf1_offset);
+	reg = omap_ctrl_readl(control_devconf1_offset);
+	if (mmc->slots[0].internal_clock)
 		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-		omap_ctrl_writel(reg, control_devconf1_offset);
-	}
+	else
+		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
+	omap_ctrl_writel(reg, control_devconf1_offset);
 }
 
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
 				   int power_on, int vdd)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -292,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 	}
 }
 
-static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
-					struct omap_mmc_platform_data *mmc)
+static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+				 struct omap_mmc_platform_data *mmc)
 {
 	char *hc_name;
 
@@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 			c->caps &= ~MMC_CAP_8_BIT_DATA;
 			c->caps |= MMC_CAP_4_BIT_DATA;
 		}
-		/* FALLTHROUGH */
-	case 3:
 		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
 			/* off-chip level shifting, or none */
-			mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+			mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
 			mmc->slots[0].after_set_reg = NULL;
 		}
 		break;
+	case 3:
 	case 4:
 	case 5:
 		mmc->slots[0].before_set_reg = NULL;
@@ -430,7 +430,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
-void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -487,7 +487,7 @@ done:
 	kfree(mmc_data);
 }
 
-void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3f174d51f67..eb50c29fb64 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
-#ifdef CONFIG_ARCH_OMAP2
+#ifdef CONFIG_SOC_OMAP2420
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
@@ -400,7 +400,9 @@ void __init omap2420_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap2420_clk_init();
 }
+#endif
 
+#ifdef CONFIG_SOC_OMAP2430
 void __init omap2430_init_early(void)
 {
 	omap2_set_globals_243x();
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index e1cc75d1a57..fb8bc9fa43b 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition,
 
 static char *omap_mux_options;
 
-static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
-				      int gpio, int val)
+static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
+			       int gpio, int val)
 {
 	struct omap_mux_entry *e;
 	struct omap_mux *gpio_mux = NULL;
@@ -145,7 +145,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
 	return 0;
 }
 
-int __init omap_mux_init_gpio(int gpio, int val)
+int omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_partition *partition;
 	int ret;
@@ -159,9 +159,9 @@ int __init omap_mux_init_gpio(int gpio, int val)
 	return -ENODEV;
 }
 
-static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
-					const char *muxname,
-					struct omap_mux **found_mux)
+static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
+				 const char *muxname,
+				 struct omap_mux **found_mux)
 {
 	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
@@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname,
 	return -ENODEV;
 }
 
-int __init omap_mux_init_signal(const char *muxname, int val)
+int omap_mux_init_signal(const char *muxname, int val)
 {
 	struct omap_mux_partition *partition = NULL;
 	struct omap_mux *mux = NULL;
@@ -1094,8 +1094,8 @@ static void omap_mux_init_package(struct omap_mux *superset,
 		omap_mux_package_init_balls(package_balls, superset);
 }
 
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
-				  struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+					 struct omap_board_mux *board_mux)
 {
 	omap_mux_set_cmdline_signals();
 	omap_mux_write_array(partition, board_mux);
@@ -1109,8 +1109,8 @@ static void omap_mux_init_package(struct omap_mux *superset,
 {
 }
 
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
-				  struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+					 struct omap_board_mux *board_mux)
 {
 }
 
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index b13ef7ef5ef..503ac777a2b 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -18,6 +18,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+	__CPUINIT
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5192cabb40e..eba6cd3816f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1517,8 +1517,8 @@ static int _enable(struct omap_hwmod *oh)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
 	    oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_DISABLED) {
-		WARN(1, "omap_hwmod: %s: enabled state can only be entered "
-		     "from initialized, idle, or disabled state\n", oh->name);
+		WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
+			oh->name);
 		return -EINVAL;
 	}
 
@@ -1600,8 +1600,8 @@ static int _idle(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
-		     "enabled state\n", oh->name);
+		WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
+			oh->name);
 		return -EINVAL;
 	}
 
@@ -1682,8 +1682,8 @@ static int _shutdown(struct omap_hwmod *oh)
 
 	if (oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: disabled state can only be entered "
-		     "from idle, or enabled state\n", oh->name);
+		WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
+			oh->name);
 		return -EINVAL;
 	}
 
@@ -2240,8 +2240,8 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
 	BUG_ON(!oh);
 
 	if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
-		WARN(1, "omap_device: %s: OCP barrier impossible due to "
-		      "device configuration\n", oh->name);
+		WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n",
+			oh->name);
 		return;
 	}
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c11273da5dc..f08e442af39 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = {
 };
 
 /*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap2_dispc_sysc,
-};
-
-/*
  * 'rfbi' class
  * remote frame buffer interface
  */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 177dee20fae..2a6729741b0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 	{ .dma_req = -1 }
 };
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &omap2_dispc_sysc,
+};
+
 /* OMAP2xxx Timer Common */
 static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
 	.rev_offs	= 0x0000,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5324e8d93bc..3c8dd928628 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
 };
 
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSC_HAS_ENAWAKEUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &omap3_dispc_sysc,
+};
+
 /* l4_core -> dss_dispc */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
 	.master		= &omap3xxx_l4_core_hwmod,
@@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
 
 static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
-	.class		= &omap2_dispc_hwmod_class,
+	.class		= &omap3_dispc_hwmod_class,
 	.mpu_irqs	= omap2_dispc_irqs,
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
@@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_uart2_hwmod,
 	&omap3xxx_uart3_hwmod,
 
-	/* dss class */
-	&omap3xxx_dss_dispc_hwmod,
-	&omap3xxx_dss_dsi1_hwmod,
-	&omap3xxx_dss_rfbi_hwmod,
-	&omap3xxx_dss_venc_hwmod,
-
 	/* i2c class */
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
@@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = {
 	NULL
 };
 
+static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
+	/* dss class */
+	&omap3xxx_dss_dispc_hwmod,
+	&omap3xxx_dss_dsi1_hwmod,
+	&omap3xxx_dss_rfbi_hwmod,
+	&omap3xxx_dss_venc_hwmod,
+	NULL
+};
+
 int __init omap3xxx_hwmod_init(void)
 {
 	int r;
@@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void)
 
 	if (h)
 		r = omap_hwmod_register(h);
+	if (r < 0)
+		return r;
+
+	/*
+	 * DSS code presumes that dss_core hwmod is handled first,
+	 * _before_ any other DSS related hwmods so register common
+	 * DSS hwmods last to ensure that dss_core is already registered.
+	 * Otherwise some change things may happen, for ex. if dispc
+	 * is handled before dss_core and DSS is enabled in bootloader
+	 * DIPSC will be reset with outputs enabled which sometimes leads
+	 * to unrecoverable L3 error.
+	 * XXX The long-term fix to this is to ensure modules are set up
+	 * in dependency order in the hwmod core code.
+	 */
+	r = omap_hwmod_register(omap3xxx_dss_hwmods);
 
 	return r;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f9f15108176..ef0524c10a8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = {
 
 static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
 	{
+		.name		= "mpu",
 		.pa_start	= 0x4012e000,
 		.pa_end		= 0x4012e07f,
 		.flags		= ADDR_TYPE_RT
@@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
 
 static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
 	{
+		.name		= "dma",
 		.pa_start	= 0x4902e000,
 		.pa_end		= 0x4902e07f,
 		.flags		= ADDR_TYPE_RT
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index b8822f8b289..23de98d0384 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -82,13 +82,7 @@ static int omap2_fclks_active(void)
 	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 
-	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
-	f2 &= ~OMAP24XX_EN_UART3_MASK;
-
-	if (f1 | f2)
-		return 1;
-	return 0;
+	return (f1 | f2) ? 1 : 0;
 }
 
 static void omap2_enter_full_retention(void)
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index c1c4d86a79a..9ce765407ad 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -19,6 +19,7 @@
 #include "common.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
+#include <plat/irqs.h>
 
 #include "vp.h"
 
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 33dd655e6aa..a1d6154dc12 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -19,6 +19,7 @@
 
 #include "common.h"
 #include <plat/cpu.h>
+#include <plat/irqs.h>
 #include <plat/prcm.h>
 
 #include "vp.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 247d89478f2..f590afc1f67 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,18 +107,18 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 }
 
-static void omap_uart_set_forceidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_FORCE);
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
 }
 
 #else
 static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
 {}
 static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_forceidle(struct platform_device *pdev) {}
+static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -349,7 +349,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
 	omap_up.flags = UPF_BOOT_AUTOCONF;
 	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	omap_up.set_forceidle = omap_uart_set_forceidle;
+	omap_up.set_forceidle = omap_uart_set_smartidle;
 	omap_up.set_noidle = omap_uart_set_noidle;
 	omap_up.enable_wakeup = omap_uart_enable_wakeup;
 	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 9dd93453e56..7e755bb0ffc 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		ret = sr_late_init(sr_info);
 		if (ret) {
 			pr_warning("%s: Error in SR late init\n", __func__);
-			return ret;
+			goto err_iounmap;
 		}
 	}
 
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 6eeff0e0ae0..5c9acea9576 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = {
 static u32 notrace dmtimer_read_sched_clock(void)
 {
 	if (clksrc.reserved)
-		return __omap_dm_timer_read_counter(clksrc.io_base, 1);
+		return __omap_dm_timer_read_counter(&clksrc, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 031d116fbf1..175b7d86d86 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -247,7 +247,7 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
  * omap_vc_i2c_init - initialize I2C interface to PMIC
  * @voltdm: voltage domain containing VC data
  *
- * Use PMIC supplied seetings for I2C high-speed mode and
+ * Use PMIC supplied settings for I2C high-speed mode and
  * master code (if set) and program the VC I2C configuration
  * register.
  *
@@ -265,8 +265,8 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 
 	if (initialized) {
 		if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
-			pr_warn("%s: I2C config for all channels must match.",
-				__func__);
+			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+				__func__, voltdm->name, i2c_high_speed);
 		return;
 	}
 
@@ -292,9 +292,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	u32 val;
 
 	if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
-		pr_err("%s: PMIC info requried to configure vc for"
-			"vdd_%s not populated.Hence cannot initialize vc\n",
-			__func__, voltdm->name);
+		pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
 		return;
 	}
 
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f5e38..57db2038b23 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d022595..c3115f6853d 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 807391d84a9..0df88820978 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -41,6 +41,11 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
 	u32 val, sys_clk_rate, timeout, waittime;
 	u32 vddmin, vddmax, vstepmin, vstepmax;
 
+	if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+		pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
+		return;
+	}
+
 	if (!voltdm->read || !voltdm->write) {
 		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
 			__func__, voltdm->name);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0e28bae20bd..5dad38ec00e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -29,6 +29,7 @@
 #include <mach/hardware.h>
 #include <mach/orion5x.h>
 #include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -72,7 +73,8 @@ void __init orion5x_map_io(void)
  ****************************************************************************/
 void __init orion5x_ehci0_init(void)
 {
-	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+			EHCI_PHY_ORION);
 }
 
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 7dc6c46b5e2..5404535da1a 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -115,7 +115,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
 {
 	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
 }
@@ -133,7 +134,8 @@ static int __init s3c2410_cpufreq_init(void)
 
 arch_initcall(s3c2410_cpufreq_init);
 
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+				struct subsys_interface *sif)
 {
 	/* alter the maximum freq settings for S3C2410A. If a board knows
 	 * it only has a maximum of 200, then it should register its own
@@ -144,7 +146,7 @@ static int s3c2410a_cpufreq_add(struct device *dev)
 	s3c2410_cpufreq_info.max.pclk =  66500000;
 	s3c2410_cpufreq_info.name = "s3c2410a";
 
-	return s3c2410_cpufreq_add(dev);
+	return s3c2410_cpufreq_add(dev, sif);
 }
 
 static struct subsys_interface s3c2410a_cpufreq_interface = {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 2afd00014a7..4803338cf56 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -132,7 +132,8 @@ static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
 	},
 };
 
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -148,7 +149,7 @@ static struct subsys_interface s3c2410_dma_interface = {
 
 static int __init s3c2410_dma_drvinit(void)
 {
-	return subsys_interface_register(&s3c2410_interface);
+	return subsys_interface_register(&s3c2410_dma_interface);
 }
 
 arch_initcall(s3c2410_dma_drvinit);
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index c07438bfc99..e0b3b347da8 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -66,7 +66,7 @@ static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
 };
 
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
 {
 	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
 }
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index fda5385deff..03f706dd600 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -111,7 +111,7 @@ struct syscore_ops s3c2410_pm_syscore_ops = {
 	.resume		= s3c2410_pm_resume,
 };
 
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2410_pm_prepare;
 	pm_cpu_sleep = s3c2410_cpu_suspend;
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index d8664b7652c..125be7d5fa6 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -194,7 +194,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
 {
 	unsigned long fclk_rate;
 
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 142acd3b5e1..38472ac920f 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -159,7 +159,8 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
 };
 
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index a8a46c1644f..e65619ddbcc 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -170,7 +170,7 @@ static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
 
 static struct irq_chip s3c2412_irq_rtc_chip;
 
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int irqno;
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d1adfa65f66..d04588506ec 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -56,7 +56,7 @@ static void s3c2412_pm_prepare(void)
 {
 }
 
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2412_pm_prepare;
 	pm_cpu_sleep = s3c2412_cpu_suspend;
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 36df761061d..fd49f35e448 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -213,7 +213,8 @@ static int __init s3c2416_add_sub(unsigned int base,
 	return 0;
 }
 
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	printk(KERN_INFO "S3C2416: IRQ Support\n");
 
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 3bdb15a0d41..1bd4817b8eb 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -48,7 +48,7 @@ static void s3c2416_pm_prepare(void)
 	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 }
 
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s3c2416_pm_prepare;
 	pm_cpu_sleep = s3c2416_cpu_suspend;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index bedbc87a342..414364eb426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -149,7 +149,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
 };
 
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 15b1ddf8f62..5f0a0c8ef84 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -174,7 +174,8 @@ static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
 	},
 };
 
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c2410_dma_init();
 	s3c24xx_dma_order_set(&s3c2440_dma_order);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 4fee9bc6bcb..4a18cde439c 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -92,7 +92,7 @@ static struct irq_chip s3c_irq_wdtac97 = {
 	.irq_ack	= s3c_irq_wdtac97_ack,
 };
 
-static int s3c2440_irq_add(struct device *dev)
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int irqno;
 
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index cf7596694ef..61776764d9f 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
@@ -270,7 +270,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
-static int s3c2440_cpufreq_add(struct device *dev)
+static int s3c2440_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
 {
 	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
 	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index b5368ae8d7f..551fb433be8 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -51,7 +51,7 @@ static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
 	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
 };
 
-static int s3c2440_plls12_add(struct device *dev)
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 42f2b5cd239..3f15bcf6429 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -79,7 +79,8 @@ static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
 	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
 };
 
-static int s3c2440_plls169344_add(struct device *dev)
+static int s3c2440_plls169344_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 8004e0497bf..22cb7c94a8c 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -122,7 +122,7 @@ static struct clk s3c2442_clk_cam_upll = {
 	},
 };
 
-static int s3c2442_clk_add(struct device *dev)
+static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
 {
 	struct clk *clock_upll;
 	struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index b3fdbdda3d5..6d9b688c442 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -72,7 +72,7 @@ static struct clk clk_arm = {
 	},
 };
 
-static int s3c244x_clk_add(struct device *dev)
+static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
 	unsigned long clkdivn;
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index 74d3dcf46a4..5fe8e58d3af 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -91,7 +91,7 @@ static struct irq_chip s3c_irq_cam = {
 	.irq_ack	= s3c_irq_cam_ack,
 };
 
-static int s3c244x_irq_add(struct device *dev)
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
 {
 	unsigned int irqno;
 
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index de6b4a23c9e..14224517e62 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -135,7 +135,8 @@ static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
 };
 
-static int __init s3c2443_dma_add(struct device *dev)
+static int __init s3c2443_dma_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
 	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 35e4ff24fb4..ac2829f56d1 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -241,7 +241,8 @@ static int __init s3c2443_add_sub(unsigned int base,
 	return 0;
 }
 
-static int __init s3c2443_irq_add(struct device *dev)
+static int __init s3c2443_irq_add(struct device *dev,
+				  struct subsys_interface *sif)
 {
 	printk("S3C2443: IRQ Support\n");
 
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 31bb27dc4ae..aebbcc291b4 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
 	}, {
 		.name		= "i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+		.devname        = "s3c2440-i2c.0",
+#else
+		.devname	= "s3c2440-i2c",
+#endif
 		.parent		= &clk_p,
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 4a7394d4bd9..bee7dcd4df7 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -49,7 +49,7 @@
 
 /* uart registration process */
 
-void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
 }
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 23f9b22439c..9cba18bfe47 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -160,7 +160,7 @@ static void s5p64x0_pm_prepare(void)
 
 }
 
-static int s5p64x0_pm_add(struct device *dev)
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s5p64x0_pm_prepare;
 	pm_cpu_sleep = s5p64x0_cpu_suspend;
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index c78dfddd77f..b9ec0c35379 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -175,7 +175,7 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
 }
 
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
 }
@@ -372,7 +372,7 @@ static struct clk init_clocks_off[] = {
 	}, {
 		.name		= "hdmiphy",
 		.devname	= "s5pv210-hdmi",
-		.enable		= exynos4_clk_hdmiphy_ctrl,
+		.enable		= s5pv210_clk_hdmiphy_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "dacphy",
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 677c71c41e5..736bfb103cb 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -133,7 +133,7 @@ static void s5pv210_pm_prepare(void)
 	s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
 }
 
-static int s5pv210_pm_add(struct device *dev)
+static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
 {
 	pm_cpu_prep = s5pv210_pm_prepare;
 	pm_cpu_sleep = s5pv210_cpu_suspend;
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96c75e..068b754bc34 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
@@ -37,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a349f75..eeb4d966458 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceeec1bb..c8e7ca23fc0 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8..a2813247b45 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -208,6 +193,16 @@
  */
 
 /*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
  * FIXME !!
  *
  * gpio_no_direction
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6a6e1..7727cca6136 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515a968..cad57578cee 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0b69e..9857595eaa7 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f2b2c..d14c9b04807 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a6ac..336093f9210 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 6fcf304d3cd..a83cf51fc09 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = {
 	.dmaor_is_32bit	= 1,
 	.needs_tend_set	= 1,
 	.no_dmars	= 1,
+	.slave_only	= 1,
 };
 
 static struct resource sh7372_usb_dmae0_resources[] = {
@@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = {
 	.dmaor_is_32bit	= 1,
 	.needs_tend_set	= 1,
 	.no_dmars	= 1,
+	.slave_only	= 1,
 };
 
 static struct resource sh7372_usb_dmae1_resources[] = {
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0d159d64a34..2d0d4212be4 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fcf4f377b1d..330afdfa247 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -60,9 +60,9 @@ static struct plat_serial8250_port debug_uart_platform_data[] = {
 		.uartclk	= 216000000,
 	}, {
 		/* serial port on mini-pcie */
-		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
-		.mapbase	= TEGRA_UARTD_BASE,
-		.irq		= INT_UARTD,
+		.membase	= IO_ADDRESS(TEGRA_UARTC_BASE),
+		.mapbase	= TEGRA_UARTC_BASE,
+		.irq		= INT_UARTC,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
 		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
@@ -174,7 +174,7 @@ static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uarta",	"pll_p",	216000000,	true },
-	{ "uartd",	"pll_p",	216000000,	true },
+	{ "uartc",	"pll_p",	216000000,	true },
 
 	{ "pll_p_out4",	"pll_p",	24000000,	true },
 	{ "usbd",	"clk_m",	12000000,	false },
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index ffa83f580db..3c9f8da37ea 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -22,7 +22,7 @@
 /* SDCARD */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PV1
 
 /* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index d0132e8031a..3c9339058be 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -23,11 +23,6 @@
 
 #include <linux/list.h>
 
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
 #define TEGRA_DMA_REQ_SEL_CNTR			0
 #define TEGRA_DMA_REQ_SEL_I2S_2			1
 #define TEGRA_DMA_REQ_SEL_I2S_1			2
@@ -56,6 +51,11 @@ struct tegra_dma_channel;
 #define TEGRA_DMA_REQ_SEL_OWR			25
 #define TEGRA_DMA_REQ_SEL_INVALID		31
 
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
 enum tegra_dma_mode {
 	TEGRA_DMA_SHARED = 1,
 	TEGRA_DMA_MODE_CONTINOUS = 2,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca248816..7edef912163 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 07c4bc8ea0a..a655d3da386 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -54,9 +54,15 @@ loop1:
 	and	r1, r1, #7			@ mask of the bits for current cache only
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
+#endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr
 	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+#ifdef CONFIG_PREEMPT
+	restore_irqs_notrace r9
+#endif
 	and	r2, r1, #7			@ extract the length of the cache lines
 	add	r2, r2, #4			@ add 4 (line length offset)
 	ldr	r4, =0x3ff
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ba159370fa5..80632e8d753 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
 			continue;
 		if (__phys_to_pfn(area->phys_addr) > pfn ||
-		    __pfn_to_phys(pfn) + offset + size-1 >
-		    area->phys_addr + area->size-1)
+		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
 			continue;
 		/* we can drop the lock here as we know *area is static */
 		read_unlock(&vmlist_lock);
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 64f9d1c7f1b..3047ff923a6 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 extern int omap_secure_ram_reserve_memblock(void);
 #else
 static inline void omap_secure_ram_reserve_memblock(void)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index e5a2fde29b1..089899a7db7 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -789,10 +789,7 @@ void __init orion_xor1_init(unsigned long mapbase_low,
 /*****************************************************************************
  * EHCI
  ****************************************************************************/
-static struct orion_ehci_data orion_ehci_data = {
-	.phy_version	= EHCI_PHY_NA,
-};
-
+static struct orion_ehci_data orion_ehci_data;
 static u64 ehci_dmamask = DMA_BIT_MASK(32);
 
 
@@ -812,8 +809,10 @@ static struct platform_device orion_ehci = {
 };
 
 void __init orion_ehci_init(unsigned long mapbase,
-			    unsigned long irq)
+			    unsigned long irq,
+			    enum orion_ehci_phy_ver phy_version)
 {
+	orion_ehci_data.phy_version = phy_version;
 	fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
 		       irq);
 
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 0fe08d77e83..a7fa005a5a0 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -89,7 +89,8 @@ void __init orion_xor1_init(unsigned long mapbase_low,
 			    unsigned long irq_1);
 
 void __init orion_ehci_init(unsigned long mapbase,
-			    unsigned long irq);
+			    unsigned long irq,
+			    enum orion_ehci_phy_ver phy_version);
 
 void __init orion_ehci_1_init(unsigned long mapbase,
 			      unsigned long irq);
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 91553432711..3b1e17bd3d1 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -64,8 +64,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
 			gpio_mode |= GPIO_INPUT_OK;
 		if (*mpp_list & MPP_OUTPUT_MASK)
 			gpio_mode |= GPIO_OUTPUT_OK;
-		if (sel != 0)
-			gpio_mode = 0;
+
 		orion_gpio_set_valid(num, gpio_mode);
 	}
 
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 32a6e394db2..f10768e988d 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
 {
 	struct s3c2410_platform_i2c *npd;
 
-	if (!pd)
+	if (!pd) {
 		pd = &default_i2c_data;
+		pd->bus_num = 0;
+	}
 
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s3c_device_i2c0);
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 197e96f7040..3dea7231f63 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -8,6 +8,7 @@ config AVR32
 	select HAVE_KPROBES
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
+	select GENERIC_ATOMIC64
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index ecca820e604..6891257d514 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -13,7 +13,7 @@ obj-y += linked_dtb.o
 endif
 
 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call cmd,dtc)
+	$(call if_changed_dep,dtc)
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 756bde4fb4f..3c793682e5d 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -78,7 +78,8 @@
 				 | CF_PAGE_READABLE \
 				 | CF_PAGE_WRITABLE \
 				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
+				 | CF_PAGE_SYSTEM \
+				 | CF_PAGE_SHARED)
 
 #define PAGE_COPY	__pgprot(CF_PAGE_VALID \
 				 | CF_PAGE_ACCESSED \
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index babd5a97cdc..875b800ef0d 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -87,7 +87,7 @@ void __init paging_init(void)
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 {
-	unsigned long flags, mmuar;
+	unsigned long flags, mmuar, mmutr;
 	struct mm_struct *mm;
 	pgd_t *pgd;
 	pmd_t *pmd;
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
 		set_pte(pte, pte_wrprotect(*pte));
 
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+	mmu_write(MMUTR, mmutr);
 
 	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
 		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 863889fc31c..281e38c2b6c 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -136,7 +136,7 @@ Luser_return:
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
@@ -148,8 +148,6 @@ Lwork_to_do:
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
-	/* GERG: do we need something here for TRACEing?? */
-
 Lsignal_return:
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c4c1312473f..5ab6e89603c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2356,6 +2356,7 @@ config PCI
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
 	select GENERIC_PCI_IOMAP
+	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index 2635b1a9633..fd35daa4531 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -10,8 +10,8 @@
 #include <linux/module.h>
 #include <asm/io.h>
 
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
-                                     unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+			       unsigned long port, unsigned int nr)
 {
 	struct pci_controller *ctrl = dev->bus->sysdata;
 	unsigned long base = ctrl->io_map_base;
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 2156e077859..1acf6502677 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -24,10 +24,6 @@ CONFIG_PPC_SPLPAR=y
 CONFIG_SCANLOG=m
 CONFIG_PPC_SMLPAR=y
 CONFIG_DTL=y
-CONFIG_PPC_ISERIES=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
 CONFIG_PPC_MAPLE=y
 CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
@@ -259,7 +255,6 @@ CONFIG_PASEMI_MAC=y
 CONFIG_MLX4_EN=m
 CONFIG_QLGE=m
 CONFIG_BE2NET=m
-CONFIG_ISERIES_VETH=m
 CONFIG_PPP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 43268f15004..6d422979eba 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -142,6 +142,11 @@ static inline const char *eeh_pci_name(struct pci_dev *pdev)
 	return pdev ? pci_name(pdev) : "<null>";
 } 
 
+static inline const char *eeh_driver_name(struct pci_dev *pdev)
+{
+	return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
+}
+
 #endif /* CONFIG_EEH */
 
 #else /* CONFIG_PCI */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 78a205162fd..84cc7840cd1 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -83,8 +83,18 @@ struct pt_regs {
 
 #ifndef __ASSEMBLY__
 
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define GET_IP(regs)		((regs)->nip)
+#define GET_USP(regs)		((regs)->gpr[1])
+#define GET_FP(regs)		(0)
+#define SET_FP(regs, val)
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#define profile_pc profile_pc
+#endif
+
+#include <asm-generic/ptrace.h>
+
 #define kernel_stack_pointer(regs) ((regs)->gpr[1])
 static inline int is_syscall_success(struct pt_regs *regs)
 {
@@ -99,12 +109,6 @@ static inline long regs_return_value(struct pt_regs *regs)
 		return -regs->gpr[3];
 }
 
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
 #ifdef __powerpc64__
 #define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
 #else
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4f80cf1ce77..3e57a00b8cb 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1213,7 +1213,7 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	stw	r3,_TRAP(r1)
 2:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	mr	r4,r9
-	bl	do_signal
+	bl	do_notify_resume
 	REST_NVGPRS(r1)
 	b	recheck
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d834425186a..866462cbe2d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -751,12 +751,16 @@ user_work:
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	bl	.schedule
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
+	li	r5,1
+	TRACE_AND_RESTORE_IRQ(r5);
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_signal
+	bl	.do_notify_resume
 	b	.ret_from_except
 
 unrecov_restore:
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index d4be7bb3dbd..15c5a4f6de0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -774,8 +774,8 @@ alignment_common:
 program_check_common:
 	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	.save_nvgprs
+	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
 	bl	.program_check_exception
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 701d4aceb4f..01e2877e8e0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -118,10 +118,14 @@ static inline notrace void set_soft_enabled(unsigned long enable)
 static inline notrace void decrementer_check_overflow(void)
 {
 	u64 now = get_tb_or_rtc();
-	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+	u64 *next_tb;
+
+	preempt_disable();
+	next_tb = &__get_cpu_var(decrementers_next_tb);
 
 	if (now >= *next_tb)
 		set_dec(1);
+	preempt_enable();
 }
 
 notrace void arch_local_irq_restore(unsigned long en)
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index d614ab57ccc..f04c2301725 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -865,6 +865,7 @@ static void power_pmu_start(struct perf_event *event, int ef_flags)
 {
 	unsigned long flags;
 	s64 left;
+	unsigned long val;
 
 	if (!event->hw.idx || !event->hw.sample_period)
 		return;
@@ -880,7 +881,12 @@ static void power_pmu_start(struct perf_event *event, int ef_flags)
 
 	event->hw.state = 0;
 	left = local64_read(&event->hw.period_left);
-	write_pmc(event->hw.idx, left);
+
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+
+	write_pmc(event->hw.idx, val);
 
 	perf_event_update_userpage(event);
 	perf_pmu_enable(event->pmu);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index ebe5766781a..d817ab01848 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -566,12 +566,12 @@ static void show_instructions(struct pt_regs *regs)
 		 */
 		if (!__kernel_text_address(pc) ||
 		     __get_user(instr, (unsigned int __user *)pc)) {
-			printk("XXXXXXXX ");
+			printk(KERN_CONT "XXXXXXXX ");
 		} else {
 			if (regs->nip == pc)
-				printk("<%08x> ", instr);
+				printk(KERN_CONT "<%08x> ", instr);
 			else
-				printk("%08x ", instr);
+				printk(KERN_CONT "%08x ", instr);
 		}
 
 		pc += sizeof(int);
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 517b1d8f455..9f843cdfee9 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -716,7 +716,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w
 	int cpu;
 
 	slb_set_size(SLB_MIN_SIZE);
-	stop_topology_update();
 	printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
 
 	while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
@@ -732,7 +731,6 @@ static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_w
 		rc = atomic_read(&data->error);
 
 	atomic_set(&data->error, rc);
-	start_topology_update();
 	pSeries_coalesce_init();
 
 	if (wake_when_done) {
@@ -846,6 +844,7 @@ int rtas_ibm_suspend_me(struct rtas_args *args)
 	atomic_set(&data.error, 0);
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
+	stop_topology_update();
 
 	/* Call function on all CPUs.  One of us will make the
 	 * rtas call
@@ -858,6 +857,8 @@ int rtas_ibm_suspend_me(struct rtas_args *args)
 	if (atomic_read(&data.error) != 0)
 		printk(KERN_ERR "Error doing global join\n");
 
+	start_topology_update();
+
 	return atomic_read(&data.error);
 }
 #else /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 2300426e531..ac6e437b102 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <linux/key.h>
 #include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -113,8 +114,9 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
 {
+	sigset_t *oldset;
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
@@ -123,7 +125,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 
 	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
-	else if (!oldset)
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -191,14 +193,16 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal_pending(NULL, regs);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 6c0ddfc0603..8dde973aaaf 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,7 +12,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
 
 extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				  size_t frame_size, int is_32);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a70bc1e385e..f92b9ef7340 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -52,32 +52,38 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
 
 static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
 {
-	unsigned int id;
+	unsigned long flags;
+	unsigned int id, rc;
+
+	spin_lock_irqsave(&phb->lock, flags);
 
-	spin_lock(&phb->lock);
 	id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
 	if (id >= phb->msi_count && phb->msi_next)
 		id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
 	if (id >= phb->msi_count) {
-		spin_unlock(&phb->lock);
-		return 0;
+		rc = 0;
+		goto out;
 	}
 	__set_bit(id, phb->msi_map);
-	spin_unlock(&phb->lock);
-	return id + phb->msi_base;
+	rc = id + phb->msi_base;
+out:
+	spin_unlock_irqrestore(&phb->lock, flags);
+	return rc;
 }
 
 static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
 {
+	unsigned long flags;
 	unsigned int id;
 
 	if (WARN_ON(hwirq < phb->msi_base ||
 		    hwirq >= (phb->msi_base + phb->msi_count)))
 		return;
 	id = hwirq - phb->msi_base;
-	spin_lock(&phb->lock);
+
+	spin_lock_irqsave(&phb->lock, flags);
 	__clear_bit(id, phb->msi_map);
-	spin_unlock(&phb->lock);
+	spin_unlock_irqrestore(&phb->lock, flags);
 }
 
 static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 565869022e3..c0b40af4ce4 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -551,9 +551,9 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
 				pdn->eeh_check_count, location,
-				dev->driver->name, eeh_pci_name(dev));
+				eeh_driver_name(dev), eeh_pci_name(dev));
 			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
-				dev->driver->name);
+				eeh_driver_name(dev));
 			dump_stack();
 		}
 		goto dn_unlock;
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index b84a8b2238d..47226e04126 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -24,6 +24,7 @@
 #include <asm/machdep.h>
 #include <asm/mmu.h>
 #include <asm/rtas.h>
+#include <asm/topology.h>
 
 static u64 stream_id;
 static struct device suspend_dev;
@@ -138,8 +139,11 @@ static ssize_t store_hibernate(struct device *dev,
 			ssleep(1);
 	} while (rc == -EAGAIN);
 
-	if (!rc)
+	if (!rc) {
+		stop_topology_update();
 		rc = pm_suspend(PM_SUSPEND_MEM);
+		start_topology_update();
+	}
 
 	stream_id = 0;
 
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
index 57687439254..97fe82ee863 100644
--- a/arch/powerpc/platforms/wsp/ics.c
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -346,7 +346,7 @@ static int wsp_chip_set_affinity(struct irq_data *d,
 	 * For the moment only implement delivery to all cpus or one cpu.
 	 * Get current irq_server for the given irq
 	 */
-	ret = cache_hwirq_map(ics, d->irq, cpumask);
+	ret = cache_hwirq_map(ics, hw_irq, cpumask);
 	if (ret == -1) {
 		char cpulist[128];
 		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
index 71bd105f386..0ba103ae83a 100644
--- a/arch/powerpc/platforms/wsp/smp.c
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -71,7 +71,7 @@ int __devinit smp_a2_kick_cpu(int nr)
 
 static int __init smp_a2_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return num_possible_cpus();
 }
 
 static struct smp_ops_t a2_smp_ops = {
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
index e0262cd0e2d..d24b3acf858 100644
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -468,15 +468,15 @@ static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
 #define DUMP_REG(x) \
 	pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
 
-#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
-	/* WSP DD1 has a bogus class code by default in the PCI-E
-	 * root complex's built-in P2P bridge */
+	/*
+	 * Some WSP variants  has a bogus class code by default in the PCI-E
+	 * root complex's built-in P2P bridge
+	 */
 	val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
 	pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
 	out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
 		 (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
 	pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
 
 #ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
 	/* XXX Disable TCE caching, it doesn't work on DD1 */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 30eb17ecad4..6073288fed2 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -385,26 +385,36 @@ static void __init setup_pci_cmd(struct pci_controller *hose)
 void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
-	int i;
-
-	if ((bus->parent == hose->bus) &&
-	    ((fsl_pcie_bus_fixup &&
-	      early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
-	     (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
-	{
-		for (i = 0; i < 4; ++i) {
+	int i, is_pcie = 0, no_link;
+
+	/* The root complex bridge comes up with bogus resources,
+	 * we copy the PHB ones in.
+	 *
+	 * With the current generic PCI code, the PHB bus no longer
+	 * has bus->resource[0..4] set, so things are a bit more
+	 * tricky.
+	 */
+
+	if (fsl_pcie_bus_fixup)
+		is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+	no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
+
+	if (bus->parent == hose->bus && (is_pcie || no_link)) {
+		for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
 			struct resource *res = bus->resource[i];
-			struct resource *par = bus->parent->resource[i];
-			if (res) {
-				res->start = 0;
-				res->end   = 0;
-				res->flags = 0;
-			}
-			if (res && par) {
-				res->start = par->start;
-				res->end   = par->end;
-				res->flags = par->flags;
-			}
+			struct resource *par;
+
+			if (!res)
+				continue;
+			if (i == 0)
+				par = &hose->io_resource;
+			else if (i < 4)
+				par = &hose->mem_resources[i-1];
+			else par = NULL;
+
+			res->start = par ? par->start : 0;
+			res->end   = par ? par->end   : 0;
+			res->flags = par ? par->flags : 0;
 		}
 	}
 }
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 2e49748b27d..234f1d859ce 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -172,13 +172,6 @@ static inline int is_compat_task(void)
 	return is_32bit_task();
 }
 
-#else
-
-static inline int is_compat_task(void)
-{
-	return 0;
-}
-
 #endif
 
 static inline void __user *arch_compat_alloc_user_space(long len)
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 18c51df9fe0..ff605a39cf4 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -662,7 +662,7 @@ ENTRY(sys32_getresuid16_wrapper)
 ENTRY(sys32_poll_wrapper)
 	llgtr	%r2,%r2			# struct pollfd *
 	llgfr	%r3,%r3			# unsigned int
-	lgfr	%r4,%r4			# long
+	lgfr	%r4,%r4			# int
 	jg	sys_poll		# branch to system call
 
 ENTRY(sys32_setresgid16_wrapper)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 3201ae44799..e795933eb2c 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -29,7 +29,6 @@
 #include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/nmi.h>
-#include <asm/compat.h>
 #include <asm/smp.h>
 #include "entry.h"
 
@@ -76,7 +75,6 @@ static void default_idle(void)
 	if (test_thread_flag(TIF_MCCK_PENDING)) {
 		local_mcck_enable();
 		local_irq_enable();
-		s390_handle_mcck();
 		return;
 	}
 	trace_hardirqs_on();
@@ -93,10 +91,12 @@ void cpu_idle(void)
 	for (;;) {
 		tick_nohz_idle_enter();
 		rcu_idle_enter();
-		while (!need_resched())
+		while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING))
 			default_idle();
 		rcu_idle_exit();
 		tick_nohz_idle_exit();
+		if (test_thread_flag(TIF_MCCK_PENDING))
+			s390_handle_mcck();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 9d82ed4bcb2..61f95489d70 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -20,8 +20,8 @@
 #include <linux/regset.h>
 #include <linux/tracehook.h>
 #include <linux/seccomp.h>
+#include <linux/compat.h>
 #include <trace/syscall.h>
-#include <asm/compat.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 354de0763ef..3b2efc81f34 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -46,6 +46,7 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 #include <linux/memory.h>
+#include <linux/compat.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -59,7 +60,6 @@
 #include <asm/ptrace.h>
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
-#include <asm/compat.h>
 #include <asm/kvm_virtio.h>
 #include <asm/diag.h>
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index a8ba840294f..2d421d90fad 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -30,7 +30,6 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
-#include <asm/compat.h>
 #include "entry.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fa02f443f5f..14da278febb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -113,11 +113,14 @@ static void fixup_clock_comparator(unsigned long long delta)
 static int s390_next_ktime(ktime_t expires,
 			   struct clock_event_device *evt)
 {
+	struct timespec ts;
 	u64 nsecs;
 
-	nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset()));
+	ts.tv_sec = ts.tv_nsec = 0;
+	monotonic_to_bootbased(&ts);
+	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
 	do_div(nsecs, 125);
-	S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9);
+	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 354dd39073e..e8fcd928dc7 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -36,7 +36,6 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
-#include <asm/compat.h>
 #include "../kernel/entry.h"
 
 #ifndef CONFIG_64BIT
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index f09c74881b7..a0155c02e32 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -29,8 +29,8 @@
 #include <linux/mman.h>
 #include <linux/module.h>
 #include <linux/random.h>
+#include <linux/compat.h>
 #include <asm/pgalloc.h>
-#include <asm/compat.h>
 
 static unsigned long stack_maxrandom_size(void)
 {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 9a4d02f64f1..51b0738e13d 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -574,7 +574,7 @@ static inline void page_table_free_pgste(unsigned long *table)
 	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
 	mp = (struct gmap_pgtable *) page->index;
 	BUG_ON(!list_empty(&mp->mapper));
-	pgtable_page_ctor(page);
+	pgtable_page_dtor(page);
 	atomic_set(&page->_mapcount, -1);
 	kfree(mp);
 	__free_page(page);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3c8db65c89e..713fb58ca50 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -859,6 +859,7 @@ config PCI
 	depends on SYS_SUPPORTS_PCI
 	select PCI_DOMAINS
 	select GENERIC_PCI_IOMAP
+	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 0838154dd21..24b1ee410da 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -169,6 +169,11 @@ static struct resource sh_eth_giga1_resources[] = {
 		.end    = 0xfee00fff,
 		.flags  = IORESOURCE_MEM,
 	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
 		.start  = 316,
 		.end    = 316,
 		.flags  = IORESOURCE_IRQ,
@@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_TX,
-	},
-	.chan_priv_rx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_RX,
-	}
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 6418e95c2b6..ebd0f818a25 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 033ef2ba621..cde7c0085ce 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -29,9 +29,11 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 2a18b06abda..5b382e1afae 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -22,6 +22,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 68c3d6f4289..d37ba272052 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -21,9 +21,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 036fe1adaef..2b07fc01695 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index fa7b978cc72..fb8f1499074 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -74,7 +74,7 @@ struct pci_errors {
 	{ SH4_PCIINT_MLCK,	"master lock error" },
 	{ SH4_PCIINT_TABT,	"target-target abort" },
 	{ SH4_PCIINT_TRET,	"target retry time out" },
-	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
 	{ SH4_PCIINT_PRTY,	"address parity error" },
 	{ SH4_PCIINT_SERR,	"SERR" },
 	{ SH4_PCIINT_TWDP,	"data parity error for target write" },
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 8f18dd090a6..1e7b0e2e764 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -356,8 +356,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 
 #ifndef CONFIG_GENERIC_IOMAP
 
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
-				    unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+			       unsigned long port, unsigned int nr)
 {
 	struct pci_channel *chan = dev->sysdata;
 
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index a1c9c0daec1..071bcb4d4bf 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,9 +3,10 @@
  *
  * This file is released under the GPLv2
  */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
 
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index b3c039a5064..70bd96646f4 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
 	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
 	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
-	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
 	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
 	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
 	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index a7b2da6b3a1..2875e8be4f7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
 	[0] = {
 		.start	= 0xfe002000,
 		.end	= 0xfe0020ff,
-		.flags	= IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	},
 	[1] = {
 		.start	= 86,
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= 54,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
 static struct resource usb_ehci_resources[] = {
 	[0] = {
 		.start	= 0xfe4f1000,
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&spi1_device,
 	&usb_ehci_device,
 	&usb_ohci_device,
 };
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 3147a9a6fb8..f624174bf23 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	init_cpu_present(&cpu_possible_map);
+	init_cpu_present(cpu_possible_mask);
 #endif
 }
 
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 4649a6ff0cf..772caffba22 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
 	 * simple until we have a method for determining topology..
 	 */
-	return cpu_possible_map;
+	return *cpu_possible_mask;
 }
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index ae08cbbfa56..949e2d3138a 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -23,6 +23,7 @@
 #define MAX_OCACHE_PAGES	32
 #define MAX_ICACHE_PAGES	32
 
+#ifdef CONFIG_CACHE_WRITEBACK
 static void sh2a_flush_oc_line(unsigned long v, int way)
 {
 	unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
 		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
 	}
 }
+#endif
 
 static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
 {
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 6919e936345..247904945d3 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size;
 extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void __math_state_restore(void);
+extern void math_state_restore(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
 extern user_regset_active_fn fpregs_active, xfpregs_active;
 extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
 				xstateregs_get;
@@ -212,19 +213,11 @@ static inline void fpu_fxsave(struct fpu *fpu)
 
 #endif	/* CONFIG_X86_64 */
 
-/* We need a safe address that is cheap to find and that is already
-   in L1 during context switch. The best choices are unfortunately
-   different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
 /*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
  */
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
 {
 	if (use_xsave()) {
 		fpu_xsave(fpu);
@@ -233,33 +226,33 @@ static inline void fpu_save_init(struct fpu *fpu)
 		 * xsave header may indicate the init state of the FP.
 		 */
 		if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
-			return;
+			return 1;
 	} else if (use_fxsr()) {
 		fpu_fxsave(fpu);
 	} else {
 		asm volatile("fnsave %[fx]; fwait"
 			     : [fx] "=m" (fpu->state->fsave));
-		return;
+		return 0;
 	}
 
-	if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+	/*
+	 * If exceptions are pending, we need to clear them so
+	 * that we don't randomly get exceptions later.
+	 *
+	 * FIXME! Is this perhaps only true for the old-style
+	 * irq13 case? Maybe we could leave the x87 state
+	 * intact otherwise?
+	 */
+	if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
 		asm volatile("fnclex");
-
-	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
-	   is pending.  Clear the x87 state here by setting it to fixed
-	   values. safe_address is a random variable that should be in L1 */
-	alternative_input(
-		ASM_NOP8 ASM_NOP2,
-		"emms\n\t"	  	/* clear stack tags */
-		"fildl %P[addr]",	/* set F?P to defined value */
-		X86_FEATURE_FXSAVE_LEAK,
-		[addr] "m" (safe_address));
+		return 0;
+	}
+	return 1;
 }
 
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
 {
-	fpu_save_init(&tsk->thread.fpu);
-	task_thread_info(tsk)->status &= ~TS_USEDFPU;
+	return fpu_save_init(&tsk->thread.fpu);
 }
 
 static inline int fpu_fxrstor_checking(struct fpu *fpu)
@@ -277,44 +270,212 @@ static inline int fpu_restore_checking(struct fpu *fpu)
 
 static inline int restore_fpu_checking(struct task_struct *tsk)
 {
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. "m" is a random variable that should be in L1 */
+	alternative_input(
+		ASM_NOP8 ASM_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %P[addr]",	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (tsk->thread.fpu.has_fpu));
+
 	return fpu_restore_checking(&tsk->thread.fpu);
 }
 
 /*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
  */
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+	return tsk->thread.fpu.has_fpu;
+}
 
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
 {
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		__save_init_fpu(tsk);
-		stts();
-	} else
-		tsk->fpu_counter = 0;
+	tsk->thread.fpu.has_fpu = 0;
+	percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+	tsk->thread.fpu.has_fpu = 1;
+	percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+	__thread_clear_has_fpu(tsk);
+	stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+	clts();
+	__thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ *  - switch_fpu_prepare() saves the old state and
+ *    sets the new state of the CR0.TS bit. This is
+ *    done within the context of the old process.
+ *
+ *  - switch_fpu_finish() restores the new state as
+ *    necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+	return new == percpu_read_stable(fpu_owner_task) &&
+		cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+	fpu_switch_t fpu;
+
+	fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+	if (__thread_has_fpu(old)) {
+		if (!__save_init_fpu(old))
+			cpu = ~0;
+		old->thread.fpu.last_cpu = cpu;
+		old->thread.fpu.has_fpu = 0;	/* But leave fpu_owner_task! */
+
+		/* Don't change CR0.TS if we just switch! */
+		if (fpu.preload) {
+			new->fpu_counter++;
+			__thread_set_has_fpu(new);
+			prefetch(new->thread.fpu.state);
+		} else
+			stts();
+	} else {
+		old->fpu_counter = 0;
+		old->thread.fpu.last_cpu = ~0;
+		if (fpu.preload) {
+			new->fpu_counter++;
+			if (fpu_lazy_restore(new, cpu))
+				fpu.preload = 0;
+			else
+				prefetch(new->thread.fpu.state);
+			__thread_fpu_begin(new);
+		}
+	}
+	return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+	if (fpu.preload) {
+		if (unlikely(restore_fpu_checking(new)))
+			__thread_fpu_end(new);
+	}
 }
 
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
 static inline void __clear_fpu(struct task_struct *tsk)
 {
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (__thread_has_fpu(tsk)) {
 		/* Ignore delayed exceptions from user space */
 		asm volatile("1: fwait\n"
 			     "2:\n"
 			     _ASM_EXTABLE(1b, 2b));
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		__thread_fpu_end(tsk);
 	}
 }
 
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: the thread must not have fpu (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+	return !__thread_has_fpu(current) &&
+		(read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+	struct pt_regs *regs = get_irq_regs();
+	return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+	return !in_interrupt() ||
+		interrupted_user_mode() ||
+		interrupted_kernel_fpu_idle();
+}
+
 static inline void kernel_fpu_begin(void)
 {
-	struct thread_info *me = current_thread_info();
+	struct task_struct *me = current;
+
+	WARN_ON_ONCE(!irq_fpu_usable());
 	preempt_disable();
-	if (me->status & TS_USEDFPU)
-		__save_init_fpu(me->task);
-	else
+	if (__thread_has_fpu(me)) {
+		__save_init_fpu(me);
+		__thread_clear_has_fpu(me);
+		/* We do 'stts()' in kernel_fpu_end() */
+	} else {
+		percpu_write(fpu_owner_task, NULL);
 		clts();
+	}
 }
 
 static inline void kernel_fpu_end(void)
@@ -323,14 +484,6 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
-static inline bool irq_fpu_usable(void)
-{
-	struct pt_regs *regs;
-
-	return !in_interrupt() || !(regs = get_irq_regs()) || \
-		user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
  * DNA fault but don't modify SSE registers. And these instructions
@@ -363,20 +516,64 @@ static inline void irq_ts_restore(int TS_state)
 }
 
 /*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+	return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+	preempt_disable();
+	__thread_fpu_end(current);
+	preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+	preempt_disable();
+	if (!user_has_fpu())
+		__thread_fpu_begin(current);
+	preempt_enable();
+}
+
+/*
  * These disable preemption on their own and are safe
  */
 static inline void save_init_fpu(struct task_struct *tsk)
 {
+	WARN_ON_ONCE(!__thread_has_fpu(tsk));
 	preempt_disable();
 	__save_init_fpu(tsk);
-	stts();
+	__thread_fpu_end(tsk);
 	preempt_enable();
 }
 
 static inline void unlazy_fpu(struct task_struct *tsk)
 {
 	preempt_disable();
-	__unlazy_fpu(tsk);
+	if (__thread_has_fpu(tsk)) {
+		__save_init_fpu(tsk);
+		__thread_fpu_end(tsk);
+	} else
+		tsk->fpu_counter = 0;
 	preempt_enable();
 }
 
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index ab4092e3214..7b9cfc4878a 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -190,6 +190,9 @@ struct x86_emulate_ops {
 	int (*intercept)(struct x86_emulate_ctxt *ctxt,
 			 struct x86_instruction_info *info,
 			 enum x86_intercept_stage stage);
+
+	bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+			 u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
 };
 
 typedef u32 __attribute__((vector_size(16))) sse128_t;
@@ -298,6 +301,19 @@ struct x86_emulate_ctxt {
 #define X86EMUL_MODE_PROT     (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
 			       X86EMUL_MODE_PROT64)
 
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
 enum x86_intercept_stage {
 	X86_ICTP_NONE = 0,   /* Allow zero-init to not match anything */
 	X86_ICPT_PRE_EXCEPT,
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 9b922c13625..e8fb2c7a5f4 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -240,4 +240,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
 static inline void perf_events_lapic_init(void)	{ }
 #endif
 
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
+ extern void amd_pmu_enable_virt(void);
+ extern void amd_pmu_disable_virt(void);
+#else
+ static inline void amd_pmu_enable_virt(void) { }
+ static inline void amd_pmu_disable_virt(void) { }
+#endif
+
 #endif /* _ASM_X86_PERF_EVENT_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index aa9088c2693..58545c97d07 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -374,6 +374,8 @@ union thread_xstate {
 };
 
 struct fpu {
+	unsigned int last_cpu;
+	unsigned int has_fpu;
 	union thread_xstate *state;
 };
 
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index bc817cd8b44..cfd8144d552 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -247,8 +247,6 @@ static inline struct thread_info *current_thread_info(void)
  * ever touches our thread-synchronous status, so we don't
  * have to worry about atomic accesses.
  */
-#define TS_USEDFPU		0x0001	/* FPU was used by this task
-					   this quantum (SMP) */
 #define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
 #define TS_POLLING		0x0004	/* idle task polling need_resched,
 					   skip sending interrupt */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d43cad74f16..c0f7d68d318 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1044,6 +1044,9 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
 
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
+
 /*
  * Special IST stacks which the CPU switches to when it calls
  * an IST-marked descriptor entry. Up to 7 stacks (hardware
@@ -1111,6 +1114,8 @@ void debug_stack_reset(void)
 
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
 EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
 
 #ifdef CONFIG_CC_STACKPROTECTOR
 DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 6b45e5e7a90..73d08ed98a6 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb)
 	l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
 }
 
-static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
-					int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
 {
 	int node;
 
@@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info);
 #define CPUID4_INFO_IDX(x, y)	(&((per_cpu(ici_cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+
+static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
 {
-	struct _cpuid4_info	*this_leaf, *sibling_leaf;
-	unsigned long num_threads_sharing;
-	int index_msb, i, sibling;
+	struct _cpuid4_info *this_leaf;
+	int ret, i, sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+	ret = 0;
+	if (index == 3) {
+		ret = 1;
 		for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
 			if (!per_cpu(ici_cpuid4_info, i))
 				continue;
@@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 				set_bit(sibling, this_leaf->shared_cpu_map);
 			}
 		}
-		return;
+	} else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
+		ret = 1;
+		for_each_cpu(i, cpu_sibling_mask(cpu)) {
+			if (!per_cpu(ici_cpuid4_info, i))
+				continue;
+			this_leaf = CPUID4_INFO_IDX(i, index);
+			for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+				if (!cpu_online(sibling))
+					continue;
+				set_bit(sibling, this_leaf->shared_cpu_map);
+			}
+		}
 	}
+
+	return ret;
+}
+
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+	struct _cpuid4_info *this_leaf, *sibling_leaf;
+	unsigned long num_threads_sharing;
+	int index_msb, i;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	if (c->x86_vendor == X86_VENDOR_AMD) {
+		if (cache_shared_amd_cpu_map_setup(cpu, index))
+			return;
+	}
+
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 786e76a8632..e4eeaaf58a4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	sprintf(name, "threshold_bank%i", bank);
 
+#ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
 		i = cpumask_first(cpu_llc_shared_mask(cpu));
 
@@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 		goto out;
 	}
+#endif
 
 	b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
 	if (!b) {
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 3c44b712380..f8bddb5b060 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -988,6 +988,9 @@ static void x86_pmu_start(struct perf_event *event, int flags)
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	int idx = event->hw.idx;
 
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
 	if (WARN_ON_ONCE(idx == -1))
 		return;
 
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 513d617b93c..82db83b5c3b 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -147,7 +147,9 @@ struct cpu_hw_events {
 	/*
 	 * AMD specific bits
 	 */
-	struct amd_nb		*amd_nb;
+	struct amd_nb			*amd_nb;
+	/* Inverted mask of bits to clear in the perf_ctr ctrl registers */
+	u64				perf_ctr_virt_mask;
 
 	void				*kfree_on_online;
 };
@@ -425,9 +427,11 @@ void x86_pmu_disable_all(void);
 static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
 					  u64 enable_mask)
 {
+	u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
+
 	if (hwc->extra_reg.reg)
 		wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
-	wrmsrl(hwc->config_base, hwc->config | enable_mask);
+	wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
 }
 
 void x86_pmu_enable_all(int added);
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 0397b23be8e..67250a52430 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -1,4 +1,5 @@
 #include <linux/perf_event.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu)
 	struct amd_nb *nb;
 	int i, nb_id;
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
 		return;
 
 	nb_id = amd_get_nb_id(cpu);
@@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = {
 	.put_event_constraints	= amd_put_event_constraints,
 
 	.cpu_prepare		= amd_pmu_cpu_prepare,
-	.cpu_starting		= amd_pmu_cpu_starting,
 	.cpu_dead		= amd_pmu_cpu_dead,
 #endif
+	.cpu_starting		= amd_pmu_cpu_starting,
 };
 
 __init int amd_pmu_init(void)
@@ -621,3 +624,33 @@ __init int amd_pmu_init(void)
 
 	return 0;
 }
+
+void amd_pmu_enable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->perf_ctr_virt_mask = 0;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
+
+void amd_pmu_disable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	/*
+	 * We only mask out the Host-only bit so that host-only counting works
+	 * when SVM is disabled. If someone sets up a guest-only counter when
+	 * SVM is disabled the Guest-only bits still gets set and the counter
+	 * will not count anything.
+	 */
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 3fe8239fd8f..1333d985177 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1532,10 +1532,17 @@ ENTRY(nmi)
 	pushq_cfi %rdx
 
 	/*
+	 * If %cs was not the kernel segment, then the NMI triggered in user
+	 * space, which means it is definitely not nested.
+	 */
+	cmpl $__KERNEL_CS, 16(%rsp)
+	jne first_nmi
+
+	/*
 	 * Check the special variable on the stack to see if NMIs are
 	 * executing.
 	 */
-	cmp $1, -8(%rsp)
+	cmpl $1, -8(%rsp)
 	je nested_nmi
 
 	/*
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index ac0417be913..73465aab28f 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -360,7 +360,6 @@ out:
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 485204f58cd..c08d1ff12b7 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -214,6 +214,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 	tsk = current;
 	err = -ENOMEM;
@@ -299,22 +300,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
-	bool preload_fpu;
+	fpu_switch_t fpu;
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
-	__unlazy_fpu(prev_p);
-
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
+	fpu = switch_fpu_prepare(prev_p, next_p, cpu);
 
 	/*
 	 * Reload esp0.
@@ -354,11 +344,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/* If we're going to preload the fpu context, make sure clts
-	   is run while we're batching the cpu state updates. */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -368,15 +353,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	arch_end_context_switch(next_p);
 
-	if (preload_fpu)
-		__math_state_restore();
-
 	/*
 	 * Restore %gs if needed (which is common)
 	 */
 	if (prev->gs | next->gs)
 		lazy_load_gs(next->gs);
 
+	switch_fpu_finish(next_p, fpu);
+
 	percpu_write(current_task, next_p);
 
 	return prev_p;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 9b9fe4a85c8..cfa5c90c01d 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -286,6 +286,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	set_tsk_thread_flag(p, TIF_FORK);
 
+	p->fpu_counter = 0;
 	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
@@ -386,18 +387,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
-	bool preload_fpu;
+	fpu_switch_t fpu;
 
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
+	fpu = switch_fpu_prepare(prev_p, next_p, cpu);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:
@@ -427,13 +419,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	load_TLS(next, cpu);
 
-	/* Must be after DS reload */
-	__unlazy_fpu(prev_p);
-
-	/* Make sure cpu is ready for new context */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -474,6 +459,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
 	prev->gsindex = gsindex;
 
+	switch_fpu_finish(next_p, fpu);
+
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
@@ -492,13 +479,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/*
-	 * Preload the FPU context, now that we've determined that the
-	 * task is likely to be using it. 
-	 */
-	if (preload_fpu)
-		__math_state_restore();
-
 	return prev_p;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 482ec3af206..4bbe04d9674 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -571,41 +571,18 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 }
 
 /*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use.  Used during context switch.
- */
-void __math_state_restore(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
-
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(tsk))) {
-		stts();
-		force_sig(SIGSEGV, tsk);
-		return;
-	}
-
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
-	tsk->fpu_counter++;
-}
-
-/*
  * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
  *
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
  * Don't touch unless you *really* know how it works.
  *
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
+ * Must be called with kernel preemption disabled (eg with local
+ * local interrupts as in the case of do_device_not_available).
  */
-asmlinkage void math_state_restore(void)
+void math_state_restore(void)
 {
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
+	struct task_struct *tsk = current;
 
 	if (!tsk_used_math(tsk)) {
 		local_irq_enable();
@@ -622,9 +599,17 @@ asmlinkage void math_state_restore(void)
 		local_irq_disable();
 	}
 
-	clts();				/* Allow maths ops (or we recurse) */
+	__thread_fpu_begin(tsk);
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		__thread_fpu_end(tsk);
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
 
-	__math_state_restore();
+	tsk->fpu_counter++;
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index a3911343976..71109111411 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_struct *tsk)
 	if (!fx)
 		return;
 
-	BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+	BUG_ON(__thread_has_fpu(tsk));
 
 	xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
 
@@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf)
 	if (!used_math())
 		return 0;
 
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (user_has_fpu()) {
 		if (use_xsave())
 			err = xsave_user(buf);
 		else
@@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf)
 
 		if (err)
 			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		user_fpu_end();
 	} else {
 		sanitize_i387_state(tsk);
 		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
@@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf)
 			return err;
 	}
 
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
+	user_fpu_begin();
 	if (use_xsave())
 		err = restore_user_xstate(buf);
 	else
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 05a562b8502..0982507b962 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1891,6 +1891,51 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
 	ss->p = 1;
 }
 
+static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
+{
+	struct x86_emulate_ops *ops = ctxt->ops;
+	u32 eax, ebx, ecx, edx;
+
+	/*
+	 * syscall should always be enabled in longmode - so only become
+	 * vendor specific (cpuid) if other modes are active...
+	 */
+	if (ctxt->mode == X86EMUL_MODE_PROT64)
+		return true;
+
+	eax = 0x00000000;
+	ecx = 0x00000000;
+	if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) {
+		/*
+		 * Intel ("GenuineIntel")
+		 * remark: Intel CPUs only support "syscall" in 64bit
+		 * longmode. Also an 64bit guest with a
+		 * 32bit compat-app running will #UD !! While this
+		 * behaviour can be fixed (by emulating) into AMD
+		 * response - CPUs of AMD can't behave like Intel.
+		 */
+		if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx &&
+		    ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx &&
+		    edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx)
+			return false;
+
+		/* AMD ("AuthenticAMD") */
+		if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx &&
+		    ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx &&
+		    edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx)
+			return true;
+
+		/* AMD ("AMDisbetter!") */
+		if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx &&
+		    ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx &&
+		    edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx)
+			return true;
+	}
+
+	/* default: (not Intel, not AMD), apply Intel's stricter rules... */
+	return false;
+}
+
 static int em_syscall(struct x86_emulate_ctxt *ctxt)
 {
 	struct x86_emulate_ops *ops = ctxt->ops;
@@ -1904,9 +1949,15 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt)
 	    ctxt->mode == X86EMUL_MODE_VM86)
 		return emulate_ud(ctxt);
 
+	if (!(em_syscall_is_enabled(ctxt)))
+		return emulate_ud(ctxt);
+
 	ops->get_msr(ctxt, MSR_EFER, &efer);
 	setup_syscalls_segments(ctxt, &cs, &ss);
 
+	if (!(efer & EFER_SCE))
+		return emulate_ud(ctxt);
+
 	ops->get_msr(ctxt, MSR_STAR, &msr_data);
 	msr_data >>= 32;
 	cs_sel = (u16)(msr_data & 0xfffc);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 5fa553babe5..e385214711c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -29,6 +29,7 @@
 #include <linux/ftrace_event.h>
 #include <linux/slab.h>
 
+#include <asm/perf_event.h>
 #include <asm/tlbflush.h>
 #include <asm/desc.h>
 #include <asm/kvm_para.h>
@@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage)
 		wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
 
 	cpu_svm_disable();
+
+	amd_pmu_disable_virt();
 }
 
 static int svm_hardware_enable(void *garbage)
@@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage)
 
 	svm_init_erratum_383();
 
+	amd_pmu_enable_virt();
+
 	return 0;
 }
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d29216c462b..3b4c8d8ad90 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1457,7 +1457,7 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 #endif
-	if (current_thread_info()->status & TS_USEDFPU)
+	if (__thread_has_fpu(current))
 		clts();
 	load_gdt(&__get_cpu_var(host_gdt));
 }
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 14d6cadc4ba..9cbfc069811 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1495,6 +1495,8 @@ static void record_steal_time(struct kvm_vcpu *vcpu)
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
+	bool pr = false;
+
 	switch (msr) {
 	case MSR_EFER:
 		return set_efer(vcpu, data);
@@ -1635,6 +1637,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
 			"0x%x data 0x%llx\n", msr, data);
 		break;
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+		pr = true;
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+		if (kvm_pmu_msr(vcpu, msr))
+			return kvm_pmu_set_msr(vcpu, msr, data);
+
+		if (pr || data != 0)
+			pr_unimpl(vcpu, "disabled perfctr wrmsr: "
+				"0x%x data 0x%llx\n", msr, data);
+		break;
 	case MSR_K7_CLK_CTL:
 		/*
 		 * Ignore all writes to this no longer documented MSR.
@@ -1835,6 +1849,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_FAM10H_MMIO_CONF_BASE:
 		data = 0;
 		break;
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+		if (kvm_pmu_msr(vcpu, msr))
+			return kvm_pmu_get_msr(vcpu, msr, pdata);
+		data = 0;
+		break;
 	case MSR_IA32_UCODE_REV:
 		data = 0x100000000ULL;
 		break;
@@ -4180,6 +4202,28 @@ static int emulator_intercept(struct x86_emulate_ctxt *ctxt,
 	return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage);
 }
 
+static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
+			       u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
+{
+	struct kvm_cpuid_entry2 *cpuid = NULL;
+
+	if (eax && ecx)
+		cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt),
+					    *eax, *ecx);
+
+	if (cpuid) {
+		*eax = cpuid->eax;
+		*ecx = cpuid->ecx;
+		if (ebx)
+			*ebx = cpuid->ebx;
+		if (edx)
+			*edx = cpuid->edx;
+		return true;
+	}
+
+	return false;
+}
+
 static struct x86_emulate_ops emulate_ops = {
 	.read_std            = kvm_read_guest_virt_system,
 	.write_std           = kvm_write_guest_virt_system,
@@ -4211,6 +4255,7 @@ static struct x86_emulate_ops emulate_ops = {
 	.get_fpu             = emulator_get_fpu,
 	.put_fpu             = emulator_put_fpu,
 	.intercept           = emulator_intercept,
+	.get_cpuid           = emulator_get_cpuid,
 };
 
 static void cache_all_regs(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 492ade8c978..d99346ea8fd 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -374,7 +374,7 @@ int __init pci_xen_init(void)
 
 int __init pci_xen_hvm_init(void)
 {
-	if (!xen_feature(XENFEAT_hvm_pirqs))
+	if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
 		return 0;
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 12eb07bfb26..4172af8ceeb 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void)
 
 	/* Prevent unwanted bits from being set in PTEs. */
 	__supported_pte_mask &= ~_PAGE_GLOBAL;
+#if 0
 	if (!xen_initial_domain())
+#endif
 		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	__supported_pte_mask |= _PAGE_IOMAP;
@@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	if (!xen_initial_domain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
-	__supported_pte_mask |= _PAGE_IOMAP;
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 58a0e46c404..95c1cf60c66 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val)
 static pteval_t xen_pte_val(pte_t pte)
 {
 	pteval_t pteval = pte.pte;
-
+#if 0
 	/* If this is a WC pte, convert back from Xen WC to Linux WC */
 	if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
 		WARN_ON(!pat_enabled);
 		pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
 	}
-
+#endif
 	if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
 		return pteval;
 
@@ -463,7 +463,7 @@ void xen_set_pat(u64 pat)
 static pte_t xen_make_pte(pteval_t pte)
 {
 	phys_addr_t addr = (pte & PTE_PFN_MASK);
-
+#if 0
 	/* If Linux is trying to set a WC pte, then map to the Xen WC.
 	 * If _PAGE_PAT is set, then it probably means it is really
 	 * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
@@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte)
 		if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
 			pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
 	}
-
+#endif
 	/*
 	 * Unprivileged domains are allowed to do IOMAPpings for
 	 * PCI passthrough, but not map ISA space.  The ISA
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 041d4fe9dfe..501d4e0244b 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -409,6 +409,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
 	cpu_bringup();
+	/*
+	 * Balance out the preempt calls - as we are running in cpu_idle
+	 * loop which has been called at bootup from cpu_bringup_and_idle.
+	 * The cpucpu_bringup_and_idle called cpu_bringup which made a
+	 * preempt_disable() So this preempt_enable will balance it out.
+	 */
+	preempt_enable();
 }
 
 #else /* !CONFIG_HOTPLUG_CPU */
diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h
index 5fb8c27cbef..405a8c49ff2 100644
--- a/arch/xtensa/include/asm/string.h
+++ b/arch/xtensa/include/asm/string.h
@@ -118,7 +118,4 @@ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
 /* Don't build bcopy at all ...  */
 #define __HAVE_ARCH_BCOPY
 
-#define __HAVE_ARCH_MEMSCAN
-#define memscan memchr
-
 #endif	/* _XTENSA_STRING_H */
author	Ingo Molnar <mingo@elte.hu>	2012-03-05 09:20:08 +0100
committer	Ingo Molnar <mingo@elte.hu>	2012-03-05 09:20:08 +0100
commit	737f24bda723fdf89ecaacb99fa2bf5683c32799 (patch)
tree	35495fff3e9956679cb5468e74e6814c8e44ee66 /arch
parent	8eedce996556d7d06522cd3a0e6069141c8dffe0 (diff)
parent	b7c924274c456499264d1cfa3d44063bb11eb5db (diff)