omap: mux: Do keypad muxing in board-*.c files

This way we get pin muxing out of plat-omap and can convert H4 to use the
new mux functions.

Note that it should be safe to assume we can mux all the keypad pins
except on H4 which may have Menelaus connected.

Signed-off-by: Tony Lindgren <tony@atomide.com>

6 files changed, 67 insertions, 61 deletions

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed102c..405ff7a3b82 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -292,6 +292,18 @@ static void __init omap_fsample_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = fsample_config;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 5f30188ade9..ee469744466 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -437,6 +437,19 @@ static void __init h2_init(void)
 	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
 	/* Irda */
 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 0be1d3b8181..a228e9d6eb7 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -397,6 +397,19 @@ static void __init h3_init(void)
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
 	omap_cfg_reg(V2_1710_GPIO10);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	spi_register_board_info(h3_spi_board_info,
 				ARRAY_SIZE(h3_spi_board_info));
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d5741c8..50690347c7b 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = perseus2_config;
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8c58f510639..cdcd4fbad15 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -363,11 +363,28 @@ static void __init omap_h4_init(void)
 #endif
 
 #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
 		row_gpios[5] = 0;
 		col_gpios[2] = 15;
 		col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
 	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
 #endif
 
 	i2c_register_board_info(1, h4_i2c_board_info,
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 95677d17cd1..ca5b2290f5a 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,7 +24,6 @@
 #include <plat/control.h>
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/menelaus.h>
 #include <plat/mcbsp.h>
@@ -93,66 +92,7 @@ static inline void omap_init_dsp(void) { }
 #endif	/* CONFIG_OMAP_DSP */
 
 /*-------------------------------------------------------------------------*/
-#if	defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
 
-static void omap_init_kp(void)
-{
-	/* 2430 and 34xx keypad is on TWL4030 */
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		return;
-
-	if (machine_is_omap_h2() || machine_is_omap_h3()) {
-		omap_cfg_reg(F18_1610_KBC0);
-		omap_cfg_reg(D20_1610_KBC1);
-		omap_cfg_reg(D19_1610_KBC2);
-		omap_cfg_reg(E18_1610_KBC3);
-		omap_cfg_reg(C21_1610_KBC4);
-
-		omap_cfg_reg(G18_1610_KBR0);
-		omap_cfg_reg(F19_1610_KBR1);
-		omap_cfg_reg(H14_1610_KBR2);
-		omap_cfg_reg(E20_1610_KBR3);
-		omap_cfg_reg(E19_1610_KBR4);
-		omap_cfg_reg(N19_1610_KBR5);
-	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_7XX_KBR0);
-		omap_cfg_reg(J7_7XX_KBR1);
-		omap_cfg_reg(E1_7XX_KBR2);
-		omap_cfg_reg(F3_7XX_KBR3);
-		omap_cfg_reg(D2_7XX_KBR4);
-
-		omap_cfg_reg(C2_7XX_KBC0);
-		omap_cfg_reg(D3_7XX_KBC1);
-		omap_cfg_reg(E4_7XX_KBC2);
-		omap_cfg_reg(F4_7XX_KBC3);
-		omap_cfg_reg(E3_7XX_KBC4);
-	} else if (machine_is_omap_h4()) {
-		omap_cfg_reg(T19_24XX_KBR0);
-		omap_cfg_reg(R19_24XX_KBR1);
-		omap_cfg_reg(V18_24XX_KBR2);
-		omap_cfg_reg(M21_24XX_KBR3);
-		omap_cfg_reg(E5__24XX_KBR4);
-		if (omap_has_menelaus()) {
-			omap_cfg_reg(B3__24XX_KBR5);
-			omap_cfg_reg(AA4_24XX_KBC2);
-			omap_cfg_reg(B13_24XX_KBC6);
-		} else {
-			omap_cfg_reg(M18_24XX_KBR5);
-			omap_cfg_reg(H19_24XX_KBC2);
-			omap_cfg_reg(N19_24XX_KBC6);
-		}
-		omap_cfg_reg(R20_24XX_KBC0);
-		omap_cfg_reg(M14_24XX_KBC1);
-		omap_cfg_reg(V17_24XX_KBC3);
-		omap_cfg_reg(P21_24XX_KBC4);
-		omap_cfg_reg(L14_24XX_KBC5);
-	}
-}
-#else
-static inline void omap_init_kp(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
 
 static struct platform_device **omap_mcbsp_devices;
@@ -420,7 +360,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_dsp();
-	omap_init_kp();
 	omap_init_rng();
 	omap_init_mcpdm();
 	omap_init_uwire();