Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ

16 files changed, 2235 insertions, 18 deletions

diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
new file mode 100644
index 00000000000..2b168486aeb
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -0,0 +1,302 @@
+/*
+ * MPC8560 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8560ADS";
+	compatible = "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <04ead9a0>;
+			bus-frequency = <13ab6680>;
+			clock-frequency = <312c8040>;
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 10000000>;
+	};
+
+	soc8560@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <13ab6680>;
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 0C 00 00 FD ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 0C 00 01 FD ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "85xx";
+			device_type = "pci";
+			reg = <8000 400>;
+			clock-frequency = <3f940aa>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x2 */
+					 1000 0 0 1 40000 31 1
+					 1000 0 0 2 40000 32 1
+					 1000 0 0 3 40000 33 1
+					 1000 0 0 4 40000 34 1
+
+					/* IDSEL 0x3 */
+					 1800 0 0 1 40000 34 1
+					 1800 0 0 2 40000 31 1
+					 1800 0 0 3 40000 32 1
+					 1800 0 0 4 40000 33 1
+
+					/* IDSEL 0x4 */
+					 2000 0 0 1 40000 33 1
+					 2000 0 0 2 40000 34 1
+					 2000 0 0 3 40000 31 1
+					 2000 0 0 4 40000 32 1
+
+					/* IDSEL 0x5  */
+					 2800 0 0 1 40000 32 1
+					 2800 0 0 2 40000 33 1
+					 2800 0 0 3 40000 34 1
+					 2800 0 0 4 40000 31 1
+
+					/* IDSEL 12 */
+					 6000 0 0 1 40000 31 1
+					 6000 0 0 2 40000 32 1
+					 6000 0 0 3 40000 33 1
+					 6000 0 0 4 40000 34 1
+
+					/* IDSEL 13 */
+					 6800 0 0 1 40000 34 1
+					 6800 0 0 2 40000 31 1
+					 6800 0 0 3 40000 32 1
+					 6800 0 0 4 40000 33 1
+
+					/* IDSEL 14*/
+					 7000 0 0 1 40000 33 1
+					 7000 0 0 2 40000 34 1
+					 7000 0 0 3 40000 31 1
+					 7000 0 0 4 40000 32 1
+
+					/* IDSEL 15 */
+					 7800 0 0 1 40000 32 1
+					 7800 0 0 2 40000 33 1
+					 7800 0 0 3 40000 34 1
+					 7800 0 0 4 40000 31 1
+
+					/* IDSEL 18 */
+					 9000 0 0 1 40000 31 1
+					 9000 0 0 2 40000 32 1
+					 9000 0 0 3 40000 33 1
+					 9000 0 0 4 40000 34 1
+
+					/* IDSEL 19 */
+					 9800 0 0 1 40000 34 1
+					 9800 0 0 2 40000 31 1
+					 9800 0 0 3 40000 32 1
+					 9800 0 0 4 40000 33 1
+
+					/* IDSEL 20 */
+					 a000 0 0 1 40000 33 1
+					 a000 0 0 2 40000 34 1
+					 a000 0 0 3 40000 31 1
+					 a000 0 0 4 40000 32 1
+
+					/* IDSEL 21 */
+					 a800 0 0 1 40000 32 1
+					 a800 0 0 2 40000 33 1
+					 a800 0 0 3 40000 34 1
+					 a800 0 0 4 40000 31 1>;
+
+			interrupt-parent = <40000>;
+			interrupts = <42 0>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 01000000>;
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 20100>;
+			built-in;
+			device_type = "open-pic";
+		};
+
+		cpm@e0000000 {
+			linux,phandle = <e0000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "cpm";
+			model = "CPM2";
+			ranges = <0 0 c0000>;
+			reg = <80000 40000>;
+			command-proc = <919c0>;
+			brg-frequency = <9d5b340>;
+
+			pic@90c00 {
+				linux,phandle = <90c00>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <1e 0>;
+				interrupt-parent = <40000>;
+				reg = <90c00 80>;
+				built-in;
+				device_type = "cpm-pic";
+			};
+
+			scc@91a00 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SCC";
+				device-id = <1>;
+				reg = <91a00 20 88000 100>;
+				clock-setup = <00ffffff 0>;
+				rx-clock = <1>;
+				tx-clock = <1>;
+				current-speed = <1c200>;
+				interrupts = <64 1>;
+				interrupt-parent = <90c00>;
+			};
+
+			scc@91a20 {
+				device_type = "serial";
+				compatible = "cpm_uart";
+				model = "SCC";
+				device-id = <2>;
+				reg = <91a20 20 88100 100>;
+				clock-setup = <ff00ffff 90000>;
+				rx-clock = <2>;
+				tx-clock = <2>;
+				current-speed = <1c200>;
+				interrupts = <65 1>;
+				interrupt-parent = <90c00>;
+			};
+
+			fcc@91320 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "FCC";
+				device-id = <2>;
+				reg = <91320 20 88500 100 913a0 30>;
+				mac-address = [ 00 00 0C 00 02 FD ];
+				clock-setup = <ff00ffff 250000>;
+				rx-clock = <15>;
+				tx-clock = <16>;
+				interrupts = <5d 1>;
+				interrupt-parent = <90c00>;
+				phy-handle = <2452002>;
+			};
+
+			fcc@91340 {
+				device_type = "network";
+				compatible = "fs_enet";
+				model = "FCC";
+				device-id = <3>;
+				reg = <91340 20 88600 100 913d0 30>;
+				mac-address = [ 00 00 0C 00 03 FD ];
+				clock-setup = <ffff00ff 3700>;
+				rx-clock = <17>;
+				tx-clock = <18>;
+				interrupts = <5e 1>;
+				interrupt-parent = <90c00>;
+				phy-handle = <2452003>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig
new file mode 100644
index 00000000000..ddc2a7b07ba
--- /dev/null
+++ b/arch/powerpc/configs/mpc8560_ads_defconfig
@@ -0,0 +1,854 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-rc4
+# Fri Aug 11 16:45:05 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_MPIC=y
+CONFIG_CPM2=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+CONFIG_MPC8560_ADS=y
+# CONFIG_MPC85xx_CDS is not set
+CONFIG_MPC8560=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_PC_KEYBOARD is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_DEBUG=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+CONFIG_SERIAL_CPM_SCC2=y
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 336dd191f76..8030f6245d8 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -20,3 +20,8 @@ ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
 obj-$(CONFIG_DEBUG_KERNEL) += sstep.o
 endif
+
+# Temporary hack until we have migrated to asm-powerpc
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_CPM2)	+= rheap.o
+endif
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c3268d9877e..0584f3c7e88 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8540_ADS
 	help
 	  This option enables support for the MPC 8540 ADS board
 
+config MPC8560_ADS
+	bool "Freescale MPC8560 ADS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC 8560 ADS board
+
 config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
@@ -25,6 +31,11 @@ config MPC8540
 	select PPC_INDIRECT_PCI
 	default y if MPC8540_ADS || MPC85xx_CDS
 
+config MPC8560
+	bool
+	select PPC_INDIRECT_PCI
+	default y if MPC8560_ADS
+
 config PPC_INDIRECT_PCI_BE
 	bool
 	depends on PPC_85xx
@@ -34,4 +45,14 @@ config MPIC
 	bool
 	default y
 
+config CPM2
+	bool
+	depends on MPC8560
+	default y
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Motorola.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it.
+
 endmenu
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 7615aa59c78..282f5d0d015 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,4 +3,5 @@
 #
 obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index cae6b73357d..28070e7ae50 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -32,6 +32,13 @@
 #include <sysdev/fsl_soc.h>
 #include "mpc85xx.h"
 
+#ifdef CONFIG_CPM2
+#include <linux/fs_enet_pd.h>
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+#include <asm/fs_pd.h>
+#endif
+
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
@@ -57,12 +64,29 @@ mpc85xx_pcibios_fixup(void)
 }
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_CPM2
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc,
+			 struct pt_regs *regs)
+{
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq(regs)) >= 0) {
+		generic_handle_irq(cascade_irq, regs);
+	}
+	desc->chip->eoi(irq);
+}
+
+#endif /* CONFIG_CPM2 */
 
 void __init mpc85xx_ads_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
 	struct device_node *np = NULL;
+#ifdef CONFIG_CPM2
+	int irq;
+#endif
 
 	np = of_find_node_by_type(np, "open-pic");
 
@@ -104,11 +128,103 @@ void __init mpc85xx_ads_pic_init(void)
 	mpic_assign_isu(mpic, 14, r.start + 0x10100);
 
 	mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+	/* Setup CPM2 PIC */
+	np = of_find_node_by_type(NULL, "cpm-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
+                return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+
+	cpm2_pic_init(np);
+	set_irq_chained_handler(irq, cpm2_cascade);
+#endif
 }
 
 /*
  * Setup the architecture
  */
+#ifdef CONFIG_CPM2
+void init_fcc_ioports(struct fs_platform_info *fpi)
+{
+	struct io_port *io = cpm2_map(im_ioport);
+	int fcc_no = fs_get_fcc_index(fpi->fs_no);
+	int target;
+	u32 tempval;
+
+	switch(fcc_no) {
+	case 1:
+		tempval = in_be32(&io->iop_pdirb);
+		tempval &= ~PB2_DIRB0;
+		tempval |= PB2_DIRB1;
+		out_be32(&io->iop_pdirb, tempval);
+
+		tempval = in_be32(&io->iop_psorb);
+		tempval &= ~PB2_PSORB0;
+		tempval |= PB2_PSORB1;
+		out_be32(&io->iop_psorb, tempval);
+
+		tempval = in_be32(&io->iop_pparb);
+		tempval |= (PB2_DIRB0 | PB2_DIRB1);
+		out_be32(&io->iop_pparb, tempval);
+
+		target = CPM_CLK_FCC2;
+		break;
+	case 2:
+		tempval = in_be32(&io->iop_pdirb);
+		tempval &= ~PB3_DIRB0;
+		tempval |= PB3_DIRB1;
+		out_be32(&io->iop_pdirb, tempval);
+
+		tempval = in_be32(&io->iop_psorb);
+		tempval &= ~PB3_PSORB0;
+		tempval |= PB3_PSORB1;
+		out_be32(&io->iop_psorb, tempval);
+
+		tempval = in_be32(&io->iop_pparb);
+		tempval |= (PB3_DIRB0 | PB3_DIRB1);
+		out_be32(&io->iop_pparb, tempval);
+
+		tempval = in_be32(&io->iop_pdirc);
+		tempval |= PC3_DIRC1;
+		out_be32(&io->iop_pdirc, tempval);
+
+		tempval = in_be32(&io->iop_pparc);
+		tempval |= PC3_DIRC1;
+		out_be32(&io->iop_pparc, tempval);
+
+		target = CPM_CLK_FCC3;
+		break;
+	default:
+		printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
+		return;
+	}
+
+	/* Port C has clocks......  */
+	tempval = in_be32(&io->iop_psorc);
+	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_psorc, tempval);
+
+	tempval = in_be32(&io->iop_pdirc);
+	tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_pdirc, tempval);
+	tempval = in_be32(&io->iop_pparc);
+	tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
+	out_be32(&io->iop_pparc, tempval);
+
+	cpm2_unmap(io);
+
+	/* Configure Serial Interface clock routing.
+	 * First,  clear FCC bits to zero,
+	 * then set the ones we want.
+	 */
+	cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
+	cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
+}
+#endif
+
 static void __init mpc85xx_ads_setup_arch(void)
 {
 	struct device_node *cpu;
@@ -131,6 +247,10 @@ static void __init mpc85xx_ads_setup_arch(void)
 		of_node_put(cpu);
 	}
 
+#ifdef CONFIG_CPM2
+	cpm2_reset();
+#endif
+
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.h b/arch/powerpc/platforms/85xx/mpc85xx_ads.h
new file mode 100644
index 00000000000..effcbf78f85
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.h
@@ -0,0 +1,61 @@
+/*
+ * MPC85xx ADS board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XXADS_H
+#define __MACH_MPC85XXADS_H
+
+#include <linux/config.h>
+#include <linux/initrd.h>
+#include <sysdev/fsl_soc.h>
+
+#define BCSR_ADDR		((uint)0xf8000000)
+#define BCSR_SIZE		((uint)(32 * 1024))
+
+#ifdef CONFIG_CPM2
+
+#define MPC85xx_CPM_OFFSET	(0x80000)
+
+#define CPM_MAP_ADDR		(get_immrbase() + MPC85xx_CPM_OFFSET)
+#define CPM_IRQ_OFFSET		60
+
+#define SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
+#define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
+
+/* FCC1 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK9-12 */
+#define F1_RXCLK       12
+#define F1_TXCLK       11
+
+/* FCC2 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK13-16 */
+#define F2_RXCLK       13
+#define F2_TXCLK       14
+
+/* FCC3 Clock Source Configuration.  These can be
+ * redefined in the board specific file.
+ *    Can only choose from CLK13-16 */
+#define F3_RXCLK       15
+#define F3_TXCLK       16
+
+#endif	/* CONFIG_CPM2 */
+#endif	/* __MACH_MPC85XXADS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index e5e999ea891..f15f4d78aee 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,3 +17,8 @@ ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 endif
+
+# Temporary hack until we have migrated to asm-powerpc
+ifeq ($(ARCH),powerpc)
+obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
+endif
diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
new file mode 100644
index 00000000000..ec265995d5d
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -0,0 +1,309 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * 	Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+#include <asm/fs_pd.h>
+
+#include <sysdev/fsl_soc.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+intctl_cpm2_t *cpm2_intctl;
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_intctl = cpm2_map(im_intctl);
+
+	/* Reclaim the DP memory for our use.
+	 */
+	cpm2_dpinit();
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK	(get_brgfreq())
+#define BRG_UART_CLK	(BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	volatile uint	*bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	} else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+
+	cpm2_unmap(bp);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	volatile uint	*bp;
+
+	if (brg < 4) {
+		bp = cpm2_map_size(im_brgc1, 16);
+	}
+	else {
+		bp = cpm2_map_size(im_brgc5, 16);
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	if (div16)
+		*bp |= CPM_BRG_DIV16;
+
+	cpm2_unmap(bp);
+}
+
+int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	cpmux_t *im_cpmux;
+	u32 *reg;
+	u32 mask = 7;
+	u8 clk_map [24][3] = {
+		{CPM_CLK_FCC1, CPM_BRG5, 0},
+		{CPM_CLK_FCC1, CPM_BRG6, 1},
+		{CPM_CLK_FCC1, CPM_BRG7, 2},
+		{CPM_CLK_FCC1, CPM_BRG8, 3},
+		{CPM_CLK_FCC1, CPM_CLK9, 4},
+		{CPM_CLK_FCC1, CPM_CLK10, 5},
+		{CPM_CLK_FCC1, CPM_CLK11, 6},
+		{CPM_CLK_FCC1, CPM_CLK12, 7},
+		{CPM_CLK_FCC2, CPM_BRG5, 0},
+		{CPM_CLK_FCC2, CPM_BRG6, 1},
+		{CPM_CLK_FCC2, CPM_BRG7, 2},
+		{CPM_CLK_FCC2, CPM_BRG8, 3},
+		{CPM_CLK_FCC2, CPM_CLK13, 4},
+		{CPM_CLK_FCC2, CPM_CLK14, 5},
+		{CPM_CLK_FCC2, CPM_CLK15, 6},
+		{CPM_CLK_FCC2, CPM_CLK16, 7},
+		{CPM_CLK_FCC3, CPM_BRG5, 0},
+		{CPM_CLK_FCC3, CPM_BRG6, 1},
+		{CPM_CLK_FCC3, CPM_BRG7, 2},
+		{CPM_CLK_FCC3, CPM_BRG8, 3},
+		{CPM_CLK_FCC3, CPM_CLK13, 4},
+		{CPM_CLK_FCC3, CPM_CLK14, 5},
+		{CPM_CLK_FCC3, CPM_CLK15, 6},
+		{CPM_CLK_FCC3, CPM_CLK16, 7}
+		};
+
+	im_cpmux = cpm2_map(im_cpmux);
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &im_cpmux->cmx_scr;
+		shift = 24;
+	case CPM_CLK_SCC2:
+		reg = &im_cpmux->cmx_scr;
+		shift = 16;
+		break;
+	case CPM_CLK_SCC3:
+		reg = &im_cpmux->cmx_scr;
+		shift = 8;
+		break;
+	case CPM_CLK_SCC4:
+		reg = &im_cpmux->cmx_scr;
+		shift = 0;
+		break;
+	case CPM_CLK_FCC1:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 24;
+		break;
+	case CPM_CLK_FCC2:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 16;
+		break;
+	case CPM_CLK_FCC3:
+		reg = &im_cpmux->cmx_fcr;
+		shift = 8;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	if (mode == CPM_CLK_RX)
+		shift +=3;
+
+	for (i=0; i<24; i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == sizeof(clk_map)/3)
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	cpm2_unmap(im_cpmux);
+	return ret;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+static u8* im_dprambase;
+
+static void cpm2_dpinit(void)
+{
+	spin_lock_init(&cpm_dpmem_lock);
+
+	im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+
+	/* initialize the info header */
+	rh_init(&cpm_dpmem_info, 1,
+			sizeof(cpm_boot_dpmem_rh_block) /
+			sizeof(cpm_boot_dpmem_rh_block[0]),
+			cpm_boot_dpmem_rh_block);
+
+	/* Attach the usable dpmem area */
+	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+	 * varies with the processor and the microcode patches activated.
+	 * But the following should be at least safe.
+	 */
+	rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+			CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	ret = rh_free(&cpm_dpmem_info, (void *)offset);
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+	rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+	return (void *)(im_dprambase + offset);
+}
+EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
new file mode 100644
index 00000000000..51752990f7b
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -0,0 +1,256 @@
+/*
+ * Platform information definitions.
+ *
+ * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates
+ * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek.
+ *
+ * Author:  Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 1999-2001 (c) Dan Malek <dan@embeddedalley.com>
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* The CPM2 internal interrupt controller.  It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#include "cpm2_pic.h"
+
+static struct device_node *cpm2_pic_node;
+static struct irq_host *cpm2_pic_host;
+#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+
+static const u_char irq_to_siureg[] = {
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* bit numbers do not match the docs, these are precomputed so the bit for
+ * a given irq is (1 << irq_to_siubit[irq]) */
+static const u_char irq_to_siubit[] = {
+	 0, 15, 14, 13, 12, 11, 10,  9,
+	 8,  7,  6,  5,  4,  3,  2,  1,
+	 2,  1,  0, 14, 13, 12, 11, 10,
+	 9,  8,  7,  6,  5,  4,  3,  0,
+	31, 30, 29, 28, 27, 26, 25, 24,
+	23, 22, 21, 20, 19, 18, 17, 16,
+	16, 17, 18, 19, 20, 21, 22, 23,
+	24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static void cpm2_mask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_unmask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	ppc_cached_irq_mask[word] |= 1 << bit;
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_mask_and_ack(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr, *sipnr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_intctl->ic_simrh);
+	sipnr = &(cpm2_intctl->ic_sipnrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+	sipnr[word] = 1 << bit;
+}
+
+static void cpm2_end_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
+
+		irq_nr -= CPM_IRQ_OFFSET;
+		bit = irq_to_siubit[irq_nr];
+		word = irq_to_siureg[irq_nr];
+
+		simr = &(cpm2_intctl->ic_simrh);
+		ppc_cached_irq_mask[word] |= 1 << bit;
+		simr[word] = ppc_cached_irq_mask[word];
+		/*
+		 * Work around large numbers of spurious IRQs on PowerPC 82xx
+		 * systems.
+		 */
+		mb();
+	}
+}
+
+static struct irq_chip cpm2_pic = {
+	.typename = " CPM2 SIU ",
+	.enable = cpm2_unmask_irq,
+	.disable = cpm2_mask_irq,
+	.unmask = cpm2_unmask_irq,
+	.mask_ack = cpm2_mask_and_ack,
+	.end = cpm2_end_irq,
+};
+
+int cpm2_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits;
+
+       /* For CPM2, read the SIVEC register and shift the bits down
+         * to get the irq number.         */
+        bits = cpm2_intctl->ic_sivec;
+        irq = bits >> 26;
+
+	if (irq == 0)
+		return(-1);
+	return irq+CPM_IRQ_OFFSET;
+}
+
+static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpm2_pic_node == NULL || cpm2_pic_node == node;
+}
+
+static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
+	return 0;
+}
+
+static void cpm2_host_unmap(struct irq_host *h, unsigned int virq)
+{
+	/* Make sure irq is masked in hardware */
+	cpm2_mask_irq(virq);
+
+	/* remove chip and handler */
+	set_irq_chip_and_handler(virq, NULL, NULL);
+}
+
+static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	static const unsigned char map_cpm2_senses[4] = {
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+		IRQ_TYPE_EDGE_RISING,
+	};
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_cpm2_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+static struct irq_host_ops cpm2_pic_host_ops = {
+	.match = cpm2_pic_host_match,
+	.map = cpm2_pic_host_map,
+	.unmap = cpm2_host_unmap,
+	.xlate = cpm2_pic_host_xlate,
+};
+
+void cpm2_pic_init(struct device_node *node)
+{
+	int i;
+
+	/* Clear the CPM IRQ controller, in case it has any bits set
+	 * from the bootloader
+	 */
+
+	/* Mask out everything */
+
+	cpm2_intctl->ic_simrh = 0x00000000;
+	cpm2_intctl->ic_simrl = 0x00000000;
+
+	wmb();
+
+	/* Ack everything */
+	cpm2_intctl->ic_sipnrh = 0xffffffff;
+	cpm2_intctl->ic_sipnrl = 0xffffffff;
+	wmb();
+
+	/* Dummy read of the vector */
+	i = cpm2_intctl->ic_sivec;
+	rmb();
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	cpm2_intctl->ic_sicr = 0;
+	cpm2_intctl->ic_scprrh = 0x05309770;
+	cpm2_intctl->ic_scprrl = 0x05309770;
+
+	/* create a legacy host */
+	if (node)
+		cpm2_pic_node = of_node_get(node);
+
+	cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64);
+	if (cpm2_pic_host == NULL) {
+		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
+		return;
+	}
+}
diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h
new file mode 100644
index 00000000000..d63e45d4df5
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2_pic.h
@@ -0,0 +1,10 @@
+#ifndef _PPC_KERNEL_CPM2_H
+#define _PPC_KERNEL_CPM2_H
+
+extern intctl_cpm2_t *cpm2_intctl;
+
+extern int cpm2_get_irq(struct pt_regs *regs);
+
+extern void cpm2_pic_init(struct device_node*);
+
+#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 92ba378b799..022ed275ea6 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -3,6 +3,9 @@
  *
  * Maintained by Kumar Gala (see MAINTAINERS for contact information)
  *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -20,15 +23,20 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/time.h>
 #include <asm/prom.h>
 #include <sysdev/fsl_soc.h>
 #include <mm/mmu_decl.h>
+#include <asm/cpm2.h>
 
+extern void init_fcc_ioports(struct fs_platform_info*);
 static phys_addr_t immrbase = -1;
 
 phys_addr_t get_immrbase(void)
@@ -42,7 +50,9 @@ phys_addr_t get_immrbase(void)
 	if (soc) {
 		unsigned int size;
 		const void *prop = get_property(soc, "reg", &size);
-		immrbase = of_translate_address(soc, prop);
+
+		if (prop)
+			immrbase = of_translate_address(soc, prop);
 		of_node_put(soc);
 	};
 
@@ -51,6 +61,59 @@ phys_addr_t get_immrbase(void)
 
 EXPORT_SYMBOL(get_immrbase);
 
+#ifdef CONFIG_CPM2
+
+static u32 brgfreq = -1;
+
+u32 get_brgfreq(void)
+{
+	struct device_node *node;
+
+	if (brgfreq != -1)
+		return brgfreq;
+
+	node = of_find_node_by_type(NULL, "cpm");
+	if (node) {
+		unsigned int size;
+		const unsigned int *prop = get_property(node, "brg-frequency",
+					&size);
+
+		if (prop)
+			brgfreq = *prop;
+		of_node_put(node);
+	};
+
+	return brgfreq;
+}
+
+EXPORT_SYMBOL(get_brgfreq);
+
+static u32 fs_baudrate = -1;
+
+u32 get_baudrate(void)
+{
+	struct device_node *node;
+
+	if (fs_baudrate != -1)
+		return fs_baudrate;
+
+	node = of_find_node_by_type(NULL, "serial");
+	if (node) {
+		unsigned int size;
+		const unsigned int *prop = get_property(node, "current-speed",
+				&size);
+
+		if (prop)
+			fs_baudrate = *prop;
+		of_node_put(node);
+	};
+
+	return fs_baudrate;
+}
+
+EXPORT_SYMBOL(get_baudrate);
+#endif /* CONFIG_CPM2 */
+
 static int __init gfar_mdio_of_init(void)
 {
 	struct device_node *np;
@@ -85,8 +148,11 @@ static int __init gfar_mdio_of_init(void)
 			mdio_data.irq[k] = -1;
 
 		while ((child = of_get_next_child(np, child)) != NULL) {
-			const u32 *id = get_property(child, "reg", NULL);
-			mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
+			int irq = irq_of_parse_and_map(child, 0);
+			if (irq != NO_IRQ) {
+				const u32 *id = get_property(child, "reg", NULL);
+				mdio_data.irq[*id] = irq;
+			}
 		}
 
 		ret =
@@ -128,7 +194,7 @@ static int __init gfar_of_init(void)
 		const char *model;
 		const void *mac_addr;
 		const phandle *ph;
-		int n_res = 1;
+		int n_res = 2;
 
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
@@ -159,7 +225,7 @@ static int __init gfar_of_init(void)
 
 		gfar_dev =
 		    platform_device_register_simple("fsl-gianfar", i, &r[0],
-						    n_res + 1);
+						    n_res);
 
 		if (IS_ERR(gfar_dev)) {
 			ret = PTR_ERR(gfar_dev);
@@ -478,3 +544,208 @@ err:
 }
 
 arch_initcall(fsl_usb_of_init);
+
+#ifdef CONFIG_CPM2
+
+static const char fcc_regs[] = "fcc_regs";
+static const char fcc_regs_c[] = "fcc_regs_c";
+static const char fcc_pram[] = "fcc_pram";
+static char bus_id[9][BUS_ID_SIZE];
+
+static int __init fs_enet_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *fs_enet_dev;
+	struct resource res;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
+	     i++) {
+		struct resource r[4];
+		struct device_node *phy, *mdio;
+		struct fs_platform_info fs_enet_data;
+		const unsigned int *id, *phy_addr;
+		const void *mac_addr;
+		const phandle *ph;
+		const char *model;
+
+		memset(r, 0, sizeof(r));
+		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		if (ret)
+			goto err;
+		r[0].name = fcc_regs;
+
+		ret = of_address_to_resource(np, 1, &r[1]);
+		if (ret)
+			goto err;
+		r[1].name = fcc_pram;
+
+		ret = of_address_to_resource(np, 2, &r[2]);
+		if (ret)
+			goto err;
+		r[2].name = fcc_regs_c;
+
+		r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
+		r[3].flags = IORESOURCE_IRQ;
+
+		fs_enet_dev =
+		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
+
+		if (IS_ERR(fs_enet_dev)) {
+			ret = PTR_ERR(fs_enet_dev);
+			goto err;
+		}
+
+		model = get_property(np, "model", NULL);
+		if (model == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		mac_addr = get_property(np, "mac-address", NULL);
+		memcpy(fs_enet_data.macaddr, mac_addr, 6);
+
+		ph = get_property(np, "phy-handle", NULL);
+		phy = of_find_node_by_phandle(*ph);
+
+		if (phy == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		phy_addr = get_property(phy, "reg", NULL);
+		fs_enet_data.phy_addr = *phy_addr;
+
+		id = get_property(np, "device-id", NULL);
+		fs_enet_data.fs_no = *id;
+		strcpy(fs_enet_data.fs_type, model);
+
+		mdio = of_get_parent(phy);
+                ret = of_address_to_resource(mdio, 0, &res);
+                if (ret) {
+                        of_node_put(phy);
+                        of_node_put(mdio);
+                        goto unreg;
+                }
+
+		fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
+		fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+
+		if (strstr(model, "FCC")) {
+			int fcc_index = *id - 1;
+
+			fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
+			fs_enet_data.rx_ring = 32;
+			fs_enet_data.tx_ring = 32;
+			fs_enet_data.rx_copybreak = 240;
+			fs_enet_data.use_napi = 0;
+			fs_enet_data.napi_weight = 17;
+			fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
+			fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
+			fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
+
+			snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
+							(u32)res.start, fs_enet_data.phy_addr);
+			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
+			fs_enet_data.init_ioports = init_fcc_ioports;
+		}
+
+		of_node_put(phy);
+		of_node_put(mdio);
+
+		ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+					     sizeof(struct
+						    fs_platform_info));
+		if (ret)
+			goto unreg;
+	}
+	return 0;
+
+unreg:
+	platform_device_unregister(fs_enet_dev);
+err:
+	return ret;
+}
+
+arch_initcall(fs_enet_of_init);
+
+static const char scc_regs[] = "regs";
+static const char scc_pram[] = "pram";
+
+static int __init cpm_uart_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *cpm_uart_dev;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
+	     i++) {
+		struct resource r[3];
+		struct fs_uart_platform_info cpm_uart_data;
+		const int *id;
+		const char *model;
+
+		memset(r, 0, sizeof(r));
+		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		if (ret)
+			goto err;
+
+		r[0].name = scc_regs;
+
+		ret = of_address_to_resource(np, 1, &r[1]);
+		if (ret)
+			goto err;
+		r[1].name = scc_pram;
+
+		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+		r[2].flags = IORESOURCE_IRQ;
+
+		cpm_uart_dev =
+		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
+
+		if (IS_ERR(cpm_uart_dev)) {
+			ret = PTR_ERR(cpm_uart_dev);
+			goto err;
+		}
+
+		id = get_property(np, "device-id", NULL);
+		cpm_uart_data.fs_no = *id;
+
+		model = (char*)get_property(np, "model", NULL);
+		strcpy(cpm_uart_data.fs_type, model);
+
+		cpm_uart_data.uart_clk = ppc_proc_freq;
+
+		cpm_uart_data.tx_num_fifo = 4;
+		cpm_uart_data.tx_buf_size = 32;
+		cpm_uart_data.rx_num_fifo = 4;
+		cpm_uart_data.rx_buf_size = 32;
+		cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
+		cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+
+		ret =
+		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
+					     sizeof(struct
+						    fs_uart_platform_info));
+		if (ret)
+			goto unreg;
+	}
+
+	return 0;
+
+unreg:
+	platform_device_unregister(cpm_uart_dev);
+err:
+	return ret;
+}
+
+arch_initcall(cpm_uart_of_init);
+#endif /* CONFIG_CPM2 */
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 5a3dd480d2f..04e145b5fc3 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -5,6 +5,8 @@
 #include <asm/mmu.h>
 
 extern phys_addr_t get_immrbase(void);
+extern u32 get_brgfreq(void);
+extern u32 get_baudrate(void);
 
 #endif
 #endif
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index 2a35fe2b9b9..d5d36c372c8 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -103,7 +103,7 @@ static struct fs_platform_info mpc82xx_enet_pdata[] = {
 	},
 };
 
-static void init_fcc1_ioports(void)
+static void init_fcc1_ioports(struct fs_platform_info*)
 {
 	struct io_port *io;
 	u32 tempval;
@@ -144,7 +144,7 @@ static void init_fcc1_ioports(void)
 	iounmap(immap);
 }
 
-static void init_fcc2_ioports(void)
+static void init_fcc2_ioports(struct fs_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 	u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
@@ -229,7 +229,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
 	}
 }
 
-static void init_scc1_uart_ioports(void)
+static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 
@@ -246,7 +246,7 @@ static void init_scc1_uart_ioports(void)
 	iounmap(immap);
 }
 
-static void init_scc4_uart_ioports(void)
+static void init_scc4_uart_ioports(struct fs_uart_platform_info*)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index e12cece4c9f..5f130dca377 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -137,7 +137,7 @@ void __init board_init(void)
 	iounmap(bcsr_io);
 }
 
-static void setup_fec1_ioports(void)
+static void setup_fec1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -145,7 +145,7 @@ static void setup_fec1_ioports(void)
 	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
 }
 
-static void setup_scc1_ioports(void)
+static void setup_scc1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -194,7 +194,7 @@ static void setup_scc1_ioports(void)
 
 }
 
-static void setup_smc1_ioports(void)
+static void setup_smc1_ioports(struct fs_uart_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -216,7 +216,7 @@ static void setup_smc1_ioports(void)
 
 }
 
-static void setup_smc2_ioports(void)
+static void setup_smc2_ioports(struct fs_uart_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index 5dfa4e6c2af..bf388ed04d4 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -161,7 +161,7 @@ void __init board_init(void)
 #endif
 }
 
-static void setup_fec1_ioports(void)
+static void setup_fec1_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -181,7 +181,7 @@ static void setup_fec1_ioports(void)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
 }
 
-static void setup_fec2_ioports(void)
+static void setup_fec2_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -193,7 +193,7 @@ static void setup_fec2_ioports(void)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
 }
 
-static void setup_scc3_ioports(void)
+static void setup_scc3_ioports(struct fs_platform_info*)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -315,7 +315,7 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
 	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
 }
 
-static void setup_smc1_ioports(void)
+static void setup_smc1_ioports(struct fs_uart_platform_info*)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;
@@ -335,7 +335,7 @@ static void setup_smc1_ioports(void)
         clrbits16(&immap->im_cpm.cp_pbodr, iobits);
 }
 
-static void setup_smc2_ioports(void)
+static void setup_smc2_ioports(struct fs_uart_platform_info*)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;