diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-27 15:00:10 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-27 15:00:10 -0700 |
commit | 8b789b7d7e9b12b086d6d2f0759073a11447c7e7 (patch) | |
tree | d14d2475f9f71e27bc60f20d6400a3a05b64f62b /arch | |
parent | 61cca8c72eb284e80876bafdea057055f6e793e4 (diff) | |
parent | b46ffaefe3c251897de23e5a534dd922c969d67b (diff) |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/kernel/process.c | 5 | ||||
-rw-r--r-- | arch/arm/kernel/time.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-aaec2000/Makefile.boot | 1 | ||||
-rw-r--r-- | arch/arm/mm/init.c | 71 | ||||
-rw-r--r-- | arch/arm/mm/mm-armv.c | 87 | ||||
-rw-r--r-- | arch/arm/tools/mach-types | 69 |
6 files changed, 150 insertions, 93 deletions
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8f146a4b475..bbea636ff68 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/mach/time.h> extern const char *processor_modes[]; extern void setup_mm_for_reboot(char mode); @@ -85,8 +86,10 @@ EXPORT_SYMBOL(pm_power_off); void default_idle(void) { local_irq_disable(); - if (!need_resched() && !hlt_counter) + if (!need_resched() && !hlt_counter) { + timer_dyn_reprogram(); arch_idle(); + } local_irq_enable(); } diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 06054c9ba07..1b7fcd50c3e 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -424,15 +424,19 @@ static int timer_dyn_tick_disable(void) return ret; } +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ void timer_dyn_reprogram(void) { struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - write_seqlock_irqsave(&xtime_lock, flags); + write_seqlock(&xtime_lock); if (dyn_tick->state & DYN_TICK_ENABLED) dyn_tick->reprogram(next_timer_interrupt() - jiffies); - write_sequnlock_irqrestore(&xtime_lock, flags); + write_sequnlock(&xtime_lock); } static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot new file mode 100644 index 00000000000..8f5a8b7c53c --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile.boot @@ -0,0 +1 @@ + zreladdr-y := 0xf0008000 diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c08710b1ff0..6dcb23d64bf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -522,6 +522,69 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); } +static inline void +free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +{ + struct page *start_pg, *end_pg; + unsigned long pg, pgend; + + /* + * Convert start_pfn/end_pfn to a struct page pointer. + */ + start_pg = pfn_to_page(start_pfn); + end_pg = pfn_to_page(end_pfn); + + /* + * Convert to physical addresses, and + * round start upwards and end downwards. + */ + pg = PAGE_ALIGN(__pa(start_pg)); + pgend = __pa(end_pg) & PAGE_MASK; + + /* + * If there are free pages between these, + * free the section of the memmap array. + */ + if (pg < pgend) + free_bootmem_node(NODE_DATA(node), pg, pgend - pg); +} + +/* + * The mem_map array can get very big. Free the unused area of the memory map. + */ +static void __init free_unused_memmap_node(int node, struct meminfo *mi) +{ + unsigned long bank_start, prev_bank_end = 0; + unsigned int i; + + /* + * [FIXME] This relies on each bank being in address order. This + * may not be the case, especially if the user has provided the + * information on the command line. + */ + for (i = 0; i < mi->nr_banks; i++) { + if (mi->bank[i].size == 0 || mi->bank[i].node != node) + continue; + + bank_start = mi->bank[i].start >> PAGE_SHIFT; + if (bank_start < prev_bank_end) { + printk(KERN_ERR "MEM: unordered memory banks. " + "Not freeing memmap.\n"); + break; + } + + /* + * If we had a previous bank, and there is a space + * between the current bank and the previous, free it. + */ + if (prev_bank_end && prev_bank_end != bank_start) + free_memmap(node, prev_bank_end, bank_start); + + prev_bank_end = (mi->bank[i].start + + mi->bank[i].size) >> PAGE_SHIFT; + } +} + /* * mem_init() marks the free areas in the mem_map and tells us how much * memory is free. This is done after various parts of the system have @@ -540,16 +603,12 @@ void __init mem_init(void) max_mapnr = virt_to_page(high_memory) - mem_map; #endif - /* - * We may have non-contiguous memory. - */ - if (meminfo.nr_banks != 1) - create_memmap_holes(&meminfo); - /* this will put all unused low memory onto the freelists */ for_each_online_node(node) { pg_data_t *pgdat = NODE_DATA(node); + free_unused_memmap_node(node, &meminfo); + if (pgdat->node_spanned_pages != 0) totalram_pages += free_all_bootmem_node(pgdat); } diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 2c2b93d77d4..052ab443ec4 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -169,7 +169,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + /* + * Copy over the kernel and IO PGD entries + */ init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); if (!vectors_high()) { /* @@ -198,14 +205,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } - /* - * Copy over the kernel and IO PGD entries - */ - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - return new_pgd; no_pte: @@ -698,75 +697,3 @@ void __init iotable_init(struct map_desc *io_desc, int nr) for (i = 0; i < nr; i++) create_mapping(io_desc + i); } - -static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - unsigned long pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn); - end_pg = pfn_to_page(end_pfn); - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); -} - -static inline void free_unused_memmap_node(int node, struct meminfo *mi) -{ - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; - - /* - * [FIXME] This relies on each bank being in address order. This - * may not be the case, especially if the user has provided the - * information on the command line. - */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - - bank_start = mi->bank[i].start >> PAGE_SHIFT; - if (bank_start < prev_bank_end) { - printk(KERN_ERR "MEM: unordered memory banks. " - "Not freeing memmap.\n"); - break; - } - - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); - - prev_bank_end = PAGE_ALIGN(mi->bank[i].start + - mi->bank[i].size) >> PAGE_SHIFT; - } -} - -/* - * The mem_map array can get very big. Free - * the unused area of the memory map. - */ -void __init create_memmap_holes(struct meminfo *mi) -{ - int node; - - for_each_online_node(node) - free_unused_memmap_node(node, mi); -} diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 30c1dfbb052..6d3a79e5fef 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -6,7 +6,7 @@ # To add an entry into this database, please see Documentation/arm/README, # or contact rmk@arm.linux.org.uk # -# Last update: Thu Mar 24 14:34:50 2005 +# Last update: Thu Jun 23 20:19:33 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -243,7 +243,7 @@ yoho ARCH_YOHO YOHO 231 jasper ARCH_JASPER JASPER 232 dsc25 ARCH_DSC25 DSC25 233 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 -ramses ARCH_RAMSES RAMSES 235 +mnci ARCH_RAMSES RAMSES 235 s28x ARCH_S28X S28X 236 mport3 ARCH_MPORT3 MPORT3 237 pxa_eagle250 ARCH_PXA_EAGLE250 PXA_EAGLE250 238 @@ -323,7 +323,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -m825xx ARCH_M825XX M825XX 315 +comcerto ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -724,3 +724,66 @@ lpc22xx MACH_LPC22XX LPC22XX 715 omap_comet3 MACH_COMET3 COMET3 716 omap_comet4 MACH_COMET4 COMET4 717 csb625 MACH_CSB625 CSB625 718 +fortunet2 MACH_FORTUNET2 FORTUNET2 719 +s5h2200 MACH_S5H2200 S5H2200 720 +optorm920 MACH_OPTORM920 OPTORM920 721 +adsbitsyxb MACH_ADSBITSYXB ADSBITSYXB 722 +adssphere MACH_ADSSPHERE ADSSPHERE 723 +adsportal MACH_ADSPORTAL ADSPORTAL 724 +ln2410sbc MACH_LN2410SBC LN2410SBC 725 +cb3rufc MACH_CB3RUFC CB3RUFC 726 +mp2usb MACH_MP2USB MP2USB 727 +ntnp425c MACH_NTNP425C NTNP425C 728 +colibri MACH_COLIBRI COLIBRI 729 +pcm7220 MACH_PCM7220 PCM7220 730 +gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 +pcm027 MACH_PCM027 PCM027 732 +cmpxa MACH_CMPXA CMPXA 733 +anubis MACH_ANUBIS ANUBIS 734 +ite8152 MACH_ITE8152 ITE8152 735 +lpc3xxx MACH_LPC3XXX LPC3XXX 736 +puppeteer MACH_PUPPETEER PUPPETEER 737 +vt001 MACH_MACH_VADATECH MACH_VADATECH 738 +e570 MACH_E570 E570 739 +x50 MACH_X50 X50 740 +recon MACH_RECON RECON 741 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 +fpic2 MACH_FPIC2 FPIC2 743 +akita MACH_AKITA AKITA 744 +a81 MACH_A81 A81 745 +svm_sc25x MACH_SVM_SC25X SVM_SC25X 746 +vt020 MACH_VADATECH020 VADATECH020 747 +tli MACH_TLI TLI 748 +edb9315lc MACH_EDB9315LC EDB9315LC 749 +passec MACH_PASSEC PASSEC 750 +ds_tiger MACH_DS_TIGER DS_TIGER 751 +e310 MACH_E310 E310 752 +e330 MACH_E330 E330 753 +rt3000 MACH_RT3000 RT3000 754 +nokia770 MACH_NOKIA770 NOKIA770 755 +pnx0106 MACH_PNX0106 PNX0106 756 +hx21xx MACH_HX21XX HX21XX 757 +faraday MACH_FARADAY FARADAY 758 +sbc9312 MACH_SBC9312 SBC9312 759 +batman MACH_BATMAN BATMAN 760 +jpd201 MACH_JPD201 JPD201 761 +mipsa MACH_MIPSA MIPSA 762 +kacom MACH_KACOM KACOM 763 +swarcocpu MACH_SWARCOCPU SWARCOCPU 764 +swarcodsl MACH_SWARCODSL SWARCODSL 765 +blueangel MACH_BLUEANGEL BLUEANGEL 766 +hairygrama MACH_HAIRYGRAMA HAIRYGRAMA 767 +banff MACH_BANFF BANFF 768 +carmeva MACH_CARMEVA CARMEVA 769 +sam255 MACH_SAM255 SAM255 770 +ppm10 MACH_PPM10 PPM10 771 +edb9315a MACH_EDB9315A EDB9315A 772 +sunset MACH_SUNSET SUNSET 773 +stargate2 MACH_STARGATE2 STARGATE2 774 +intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 +trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +mainstone2 MACH_MAINSTONE2 MAINSTONE2 777 +ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 +tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 +universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 +hicoarm9 MACH_HICOARM9 HICOARM9 781 |