summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb /arch
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig53
-rw-r--r--arch/arm/boot/dts/exynos4210-pinctrl.dtsi457
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi37
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi28
-rw-r--r--arch/arm/boot/dts/omap4.dtsi8
-rw-r--r--arch/arm/configs/afeb9260_defconfig1
-rw-r--r--arch/arm/configs/at91rm9200_defconfig2
-rw-r--r--arch/arm/configs/at91sam9261_defconfig2
-rw-r--r--arch/arm/configs/at91sam9263_defconfig3
-rw-r--r--arch/arm/configs/at91sam9g20_defconfig2
-rw-r--r--arch/arm/configs/at91sam9rl_defconfig2
-rw-r--r--arch/arm/configs/cpu9260_defconfig2
-rw-r--r--arch/arm/configs/cpu9g20_defconfig2
-rw-r--r--arch/arm/configs/qil-a9260_defconfig3
-rw-r--r--arch/arm/configs/stamp9g20_defconfig1
-rw-r--r--arch/arm/configs/usb-a9260_defconfig1
-rw-r--r--arch/arm/include/asm/leds.h50
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/leds.c121
-rw-r--r--arch/arm/kernel/process.c6
-rw-r--r--arch/arm/kernel/time.c17
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c92
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c84
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c60
-rw-r--r--arch/arm/mach-at91/at91sam9263.c4
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c161
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c60
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c14
-rw-r--r--arch/arm/mach-at91/board-carmeva.c14
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c17
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c13
-rw-r--r--arch/arm/mach-at91/board-csb337.c16
-rw-r--r--arch/arm/mach-at91/board-eb9200.c14
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c32
-rw-r--r--arch/arm/mach-at91/board-eco920.c36
-rw-r--r--arch/arm/mach-at91/board-flexibity.c14
-rw-r--r--arch/arm/mach-at91/board-foxg20.c16
-rw-r--r--arch/arm/mach-at91/board-kafa.c17
-rw-r--r--arch/arm/mach-at91/board-kb9202.c37
-rw-r--r--arch/arm/mach-at91/board-neocore926.c13
-rw-r--r--arch/arm/mach-at91/board-picotux200.c14
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c14
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c17
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c17
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c16
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c39
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c13
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c13
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c14
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c2
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c16
-rw-r--r--arch/arm/mach-at91/include/mach/board.h1
-rw-r--r--arch/arm/mach-at91/leds.c105
-rw-r--r--arch/arm/mach-clps711x/Makefile2
-rw-r--r--arch/arm/mach-clps711x/p720t-leds.c63
-rw-r--r--arch/arm/mach-clps711x/p720t.c62
-rw-r--r--arch/arm/mach-ebsa110/Makefile4
-rw-r--r--arch/arm/mach-ebsa110/leds.c81
-rw-r--r--arch/arm/mach-exynos/Kconfig2
-rw-r--r--arch/arm/mach-exynos/clock-exynos5.c86
-rw-r--r--arch/arm/mach-exynos/common.c26
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h5
-rw-r--r--arch/arm/mach-exynos/mach-exynos5-dt.c8
-rw-r--r--arch/arm/mach-footbridge/Makefile4
-rw-r--r--arch/arm/mach-footbridge/ebsa285-leds.c138
-rw-r--r--arch/arm/mach-footbridge/ebsa285.c81
-rw-r--r--arch/arm/mach-footbridge/netwinder-hw.c112
-rw-r--r--arch/arm/mach-footbridge/netwinder-leds.c138
-rw-r--r--arch/arm/mach-integrator/Makefile3
-rw-r--r--arch/arm/mach-integrator/core.c3
-rw-r--r--arch/arm/mach-integrator/include/mach/cm.h2
-rw-r--r--arch/arm/mach-integrator/leds.c161
-rw-r--r--arch/arm/mach-ks8695/Makefile3
-rw-r--r--arch/arm/mach-ks8695/devices.c21
-rw-r--r--arch/arm/mach-ks8695/include/mach/devices.h5
-rw-r--r--arch/arm/mach-ks8695/leds.c92
-rw-r--r--arch/arm/mach-omap1/Makefile8
-rw-r--r--arch/arm/mach-omap1/board-h2.c32
-rw-r--r--arch/arm/mach-omap1/board-h3.c32
-rw-r--r--arch/arm/mach-omap1/board-osk.c33
-rw-r--r--arch/arm/mach-omap1/leds-h2p2-debug.c169
-rw-r--r--arch/arm/mach-omap1/leds-innovator.c98
-rw-r--r--arch/arm/mach-omap1/leds-osk.c113
-rw-r--r--arch/arm/mach-omap1/leds.c70
-rw-r--r--arch/arm/mach-omap1/leds.h3
-rw-r--r--arch/arm/mach-omap1/time.c1
-rw-r--r--arch/arm/mach-omap1/timer32k.c1
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-omap2/omap_l3_noc.c267
-rw-r--r--arch/arm/mach-omap2/omap_l3_noc.h176
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.c297
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.h338
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c72
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c1
-rw-r--r--arch/arm/mach-pxa/Makefile8
-rw-r--r--arch/arm/mach-pxa/idp.c81
-rw-r--r--arch/arm/mach-pxa/leds-idp.c115
-rw-r--r--arch/arm/mach-pxa/leds-lubbock.c124
-rw-r--r--arch/arm/mach-pxa/leds-mainstone.c119
-rw-r--r--arch/arm/mach-pxa/leds.c32
-rw-r--r--arch/arm/mach-pxa/leds.h13
-rw-r--r--arch/arm/mach-pxa/lubbock.c95
-rw-r--r--arch/arm/mach-pxa/mainstone.c94
-rw-r--r--arch/arm/mach-realview/core.c39
-rw-r--r--arch/arm/mach-realview/core.h2
-rw-r--r--arch/arm/mach-realview/realview_eb.c5
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c5
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c5
-rw-r--r--arch/arm/mach-realview/realview_pba8.c5
-rw-r--r--arch/arm/mach-realview/realview_pbx.c5
-rw-r--r--arch/arm/mach-sa1100/Makefile9
-rw-r--r--arch/arm/mach-sa1100/assabet.c85
-rw-r--r--arch/arm/mach-sa1100/badge4.c30
-rw-r--r--arch/arm/mach-sa1100/cerf.c42
-rw-r--r--arch/arm/mach-sa1100/hackkit.c32
-rw-r--r--arch/arm/mach-sa1100/lart.c26
-rw-r--r--arch/arm/mach-sa1100/leds-assabet.c113
-rw-r--r--arch/arm/mach-sa1100/leds-badge4.c110
-rw-r--r--arch/arm/mach-sa1100/leds-cerf.c110
-rw-r--r--arch/arm/mach-sa1100/leds-hackkit.c112
-rw-r--r--arch/arm/mach-sa1100/leds-lart.c101
-rw-r--r--arch/arm/mach-sa1100/leds.c50
-rw-r--r--arch/arm/mach-sa1100/leds.h13
-rw-r--r--arch/arm/mach-shark/Makefile4
-rw-r--r--arch/arm/mach-shark/core.c1
-rw-r--r--arch/arm/mach-shark/leds.c220
-rw-r--r--arch/arm/mach-tegra/tegra20_clocks_data.c20
-rw-r--r--arch/arm/mach-tegra/tegra30_clocks_data.c15
-rw-r--r--arch/arm/mach-versatile/core.c5
-rw-r--r--arch/arm/plat-omap/Kconfig3
-rw-r--r--arch/arm/plat-omap/debug-leds.c293
-rw-r--r--arch/arm/plat-samsung/time.c1
-rw-r--r--arch/arm/plat-versatile/Kconfig4
-rw-r--r--arch/arm/plat-versatile/leds.c8
140 files changed, 2312 insertions, 4506 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ad790fc25ed..2201ff3002a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1768,59 +1768,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
-config LEDS
- bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-
- If you are compiling a kernel for a NetWinder or EBSA-285, you will
- be able to select which LEDs are active using the options below. If
- you are compiling a kernel for the EBSA-110 or the LART however, the
- red LED will simply flash regularly to indicate that the system is
- still functional. It is safe to say Y here if you have a CATS
- system, but the driver will do nothing.
-
-config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
- OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- depends on !GENERIC_CLOCKEVENTS
- default y if ARCH_EBSA110
- help
- If you say Y here, one of the system LEDs (the green one on the
- NetWinder, the amber one on the EBSA285, or the red one on the LART)
- will flash regularly to indicate that the system is still
- operational. This is mainly useful to kernel hackers who are
- debugging unstable kernels.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
-config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
- !ARCH_OMAP) \
- || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
- time indication of CPU usage, by lighting whenever the idle task
- is not currently executing.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 00000000000..b12cf272ad0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,457 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl@11400000 {
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_a: uart-audio-a {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_b: uart-audio-b {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb-6", "gpb-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpc1-3", "gpc1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@11000000 {
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_clk: sd4-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_cmd: sd4-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_cd: sd4-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus1: sd4-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus4: sd4-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd4_bus8: sd4-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <4>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpk1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpk1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpk1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpk1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpk2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpk2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpk2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpk2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpk3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpk3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpk3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpk3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint0: ext-int0 {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint8: ext-int8 {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint15: ext-int15 {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint16: ext-int16 {
+ samsung,pins = "gpx2-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint31: ext-int31 {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@03860000 {
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4";
+ samsung,pin-function = <0x3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 02891fe876e..a4bd0c9a206 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -20,6 +20,7 @@
*/
/include/ "skeleton.dtsi"
+/include/ "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
@@ -29,6 +30,9 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
};
gic:interrupt-controller@10490000 {
@@ -50,6 +54,39 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 46 0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+ <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
+ <0 32 0>;
+ };
+ };
+
+ pinctrl_2: pinctrl@03860000 {
+ compatible = "samsung,pinctrl-exynos4210";
+ reg = <0x03860000 0x1000>;
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 004aaa8d123..b55794b494b 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -27,6 +27,10 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ gsc2 = &gsc_2;
+ gsc3 = &gsc_3;
};
gic:interrupt-controller@10481000 {
@@ -460,4 +464,28 @@
#gpio-cells = <4>;
};
};
+
+ gsc_0: gsc@0x13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+ };
+
+ gsc_1: gsc@0x13e10000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 86 0>;
+ };
+
+ gsc_2: gsc@0x13e20000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e20000 0x1000>;
+ interrupts = <0 87 0>;
+ };
+
+ gsc_3: gsc@0x13e30000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e30000 0x1000>;
+ interrupts = <0 88 0>;
+ };
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5d1c48459e6..3883f94fdbd 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -430,5 +430,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ ocp2scp {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+ };
};
};
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 2afdf67c212..c285a9d777d 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
index d54e2acd3ab..4ae57a34a58 100644
--- a/arch/arm/configs/at91rm9200_defconfig
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=y
+CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig
index ade6b2f2311..1e8712ef062 100644
--- a/arch/arm/configs/at91sam9261_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index 1cf96264cba..d2050cada82 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
@@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ATMEL_PWM=y
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 994d331b231..e1b0e80b54a 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index ad562ee6420..7cf87856d63 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index bbf729e2fb6..921480c23b9 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index e7d7942927f..ea116cbdffa 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 9160f3b7751..42d5db1876a 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
@@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_AT91=m
+CONFIG_MMC_ATMELMCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
index d5e260b8b16..52f1488591c 100644
--- a/arch/arm/configs/stamp9g20_defconfig
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -100,7 +100,6 @@ CONFIG_USB_ETH=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 2e39f38b962..a1501e1e1a9 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739f39b..00000000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/include/asm/leds.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Event-driven interface for LEDs on machines
- * Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
- led_idle_start,
- led_idle_end,
- led_timer,
- led_start,
- led_stop,
- led_claim, /* override idle & timer leds */
- led_release, /* restore idle & timer leds */
- led_start_timer_mode,
- led_stop_timer_mode,
- led_green_on,
- led_green_off,
- led_amber_on,
- led_amber_off,
- led_red_on,
- led_red_off,
- led_blue_on,
- led_blue_off,
- /*
- * I want this between led_timer and led_start, but
- * someone has decided to export this to user space
- */
- led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1c432143073..d81f3a6d9ad 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -21,7 +21,6 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 1911dae19e4..00000000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- * Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
- const char name[8];
- int on;
- int off;
-};
-
-static const struct leds_evt_name evt_names[] = {
- { "amber", led_amber_on, led_amber_off },
- { "blue", led_blue_on, led_blue_off },
- { "green", led_green_on, led_green_off },
- { "red", led_red_on, led_red_off },
-};
-
-static ssize_t leds_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- int ret = -EINVAL, len = strcspn(buf, " ");
-
- if (len > 0 && buf[len] == '\0')
- len--;
-
- if (strncmp(buf, "claim", len) == 0) {
- leds_event(led_claim);
- ret = size;
- } else if (strncmp(buf, "release", len) == 0) {
- leds_event(led_release);
- ret = size;
- } else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
- if (strlen(evt_names[i].name) != len ||
- strncmp(buf, evt_names[i].name, len) != 0)
- continue;
- if (strncmp(buf+len, " on", 3) == 0) {
- leds_event(evt_names[i].on);
- ret = size;
- } else if (strncmp(buf+len, " off", 4) == 0) {
- leds_event(evt_names[i].off);
- ret = size;
- }
- break;
- }
- }
- return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
- .name = "leds",
- .dev_name = "leds",
-};
-
-static struct device leds_device = {
- .id = 0,
- .bus = &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static void leds_resume(void)
-{
- leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
- leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
-};
-
-static int __init leds_init(void)
-{
- int ret;
- ret = subsys_system_register(&leds_subsys, NULL);
- if (ret == 0)
- ret = device_register(&leds_device);
- if (ret == 0)
- ret = device_create_file(&leds_device, &dev_attr_event);
- if (ret == 0)
- register_syscore_ops(&leds_syscore_ops);
- return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 693b744fd57..04eea22d795 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <linux/cpuidle.h>
+#include <linux/leds.h>
#include <asm/cacheflush.h>
-#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
@@ -189,7 +189,7 @@ void cpu_idle(void)
while (1) {
tick_nohz_idle_enter();
rcu_idle_enter();
- leds_event(led_idle_start);
+ ledtrig_cpu(CPU_LED_IDLE_START);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
@@ -220,7 +220,7 @@ void cpu_idle(void)
} else
local_irq_enable();
}
- leds_event(led_idle_end);
+ ledtrig_cpu(CPU_LED_IDLE_END);
rcu_idle_exit();
tick_nohz_idle_exit();
schedule_preempt_disabled();
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index af2afb01967..09be0c3c906 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -25,7 +25,6 @@
#include <linux/timer.h>
#include <linux/irq.h>
-#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/sched_clock.h>
#include <asm/stacktrace.h>
@@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void)
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
- static unsigned int count = HZ/2;
-
- if (--count == 0) {
- count = HZ/2;
- leds_event(led_timer);
- }
-}
-#else
-#define do_leds()
-#endif
-
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -102,7 +86,6 @@ static inline void do_leds(void)
void timer_tick(void)
{
profile_tick(CPU_PROFILING);
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 01fb7325fec..9ac427a702d 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91rm9200_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
+ unsigned int i;
+ unsigned int slot_count = 0;
+
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA27, 0);
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA8, 1);
+ if (!data->slot[i].bus_width)
+ continue;
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA9, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA10, 1);
- at91_set_B_periph(AT91_PIN_PA11, 1);
- at91_set_B_periph(AT91_PIN_PA12, 1);
+ /* input/irq */
+ if (gpio_is_valid(data->slot[i].detect_pin)) {
+ at91_set_gpio_input(data->slot[i].detect_pin, 1);
+ at91_set_deglitch(data->slot[i].detect_pin, 1);
}
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA28, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA29, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PB3, 1);
- at91_set_B_periph(AT91_PIN_PB4, 1);
- at91_set_B_periph(AT91_PIN_PB5, 1);
+ if (gpio_is_valid(data->slot[i].wp_pin))
+ at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA28, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA29, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ at91_set_B_periph(AT91_PIN_PA11, 1);
+ at91_set_B_periph(AT91_PIN_PA12, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
+ }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA27, 0);
+
+ mmc_data = *data;
+ platform_device_register(&at91rm9200_mmc_device);
}
}
- mmc_data = *data;
- platform_device_register(&at91rm9200_mmc_device);
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index bce572a530e..af50ff3281c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -209,92 +209,10 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
* MMC / SD Slot for Atmel MCI Driver
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc_data;
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index bc2590d712d..11e9fa835cd 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9261_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_B_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA6, 1);
- }
+ if (data->slot[0].bus_width) {
+ /* input/irq */
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
+ at91_set_gpio_input(data->slot[0].detect_pin, 1);
+ at91_set_deglitch(data->slot[0].detect_pin, 1);
+ }
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+ /* CLK */
+ at91_set_B_periph(AT91_PIN_PA2, 0);
- mmc_data = *data;
- platform_device_register(&at91sam9261_mmc_device);
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->slot[0].bus_width == 4) {
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA6, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9261_mmc_device);
+ }
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 84b38105231..144ef5de51b 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9b6ca734f1a..7c0898fe20f 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
[0] = {
@@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
};
static struct platform_device at91sam9263_mmc0_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
};
static struct platform_device at91sam9263_mmc1_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
.num_resources = ARRAY_SIZE(mmc1_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
+ unsigned int i;
+ unsigned int slot_count = 0;
+
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (mmc_id == 0) { /* MCI0 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA12, 0);
+ if (!data->slot[i].bus_width)
+ continue;
- if (data->slot_b) {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA16, 1);
+ /* input/irq */
+ if (gpio_is_valid(data->slot[i].detect_pin)) {
+ at91_set_gpio_input(data->slot[i].detect_pin,
+ 1);
+ at91_set_deglitch(data->slot[i].detect_pin,
+ 1);
+ }
+ if (gpio_is_valid(data->slot[i].wp_pin))
+ at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+ if (mmc_id == 0) { /* MCI0 */
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
+ }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA12, 0);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA17, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA18, 1);
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
+ mmc0_data = *data;
+ platform_device_register(&at91sam9263_mmc0_device);
}
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
+ } else if (mmc_id == 1) { /* MCI1 */
+ switch (i) {
+ case 0: /* slot A */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA8, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ slot_count++;
+ break;
+ case 1: /* slot B */
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA22, 1);
+ if (data->slot[i].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA23, 1);
+ at91_set_A_periph(AT91_PIN_PA24, 1);
+ at91_set_A_periph(AT91_PIN_PA25, 1);
+ }
+ slot_count++;
+ break;
+ default:
+ printk(KERN_ERR
+ "AT91: SD/MMC slot %d not available\n", i);
+ break;
}
- }
+ if (slot_count) {
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
- mmc0_data = *data;
- platform_device_register(&at91sam9263_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA6, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA21, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA22, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA23, 1);
- at91_set_A_periph(AT91_PIN_PA24, 1);
- at91_set_A_periph(AT91_PIN_PA25, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA8, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
+ mmc1_data = *data;
+ platform_device_register(&at91sam9263_mmc1_device);
}
}
-
- mmc1_data = *data;
- platform_device_register(&at91sam9263_mmc1_device);
}
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index b3d365dadef..1fad22f7e21 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
* MMC / SD
* -------------------------------------------------------------------- */
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
static struct resource mmc_resources[] = {
[0] = {
@@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
};
static struct platform_device at91sam9rl_mmc_device = {
- .name = "at91_mci",
+ .name = "atmel_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
+ if (data->slot[0].bus_width) {
+ /* input/irq */
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
+ at91_set_gpio_input(data->slot[0].detect_pin, 1);
+ at91_set_deglitch(data->slot[0].detect_pin, 1);
+ }
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->slot[0].bus_width == 4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9rl_mmc_device);
}
-
- mmc_data = *data;
- platform_device_register(&at91sam9rl_mmc_device);
}
#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index de7be193181..93a832f7023 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
- .det_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- .slot_b = 1,
- .wire4 = 1,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
+ },
};
@@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void)
at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
/* MMC */
- at91_add_device_mmc(0, &afeb9260_mmc_data);
+ at91_add_device_mci(0, &afeb9260_mci0_data);
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index a5b002f32a6..71d8f362a1d 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// .vcc_pin = -EINVAL,
// };
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PB10,
- .wp_pin = AT91_PIN_PC14,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB10,
+ .wp_pin = AT91_PIN_PC14,
+ },
};
static struct spi_board_info carmeva_spi_devices[] = {
@@ -150,7 +150,7 @@ static void __init carmeva_board_init(void)
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
- at91_add_device_mmc(0, &carmeva_mmc_data);
+ at91_add_device_mci(0, &carmeva_mci0_data);
/* LEDs */
at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
}
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index ecbc13b594d..e71c473316e 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = {
static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-ds1307", 0x68),
- .type = "ds1339",
+ I2C_BOARD_INFO("ds1339", 0x68),
},
};
@@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PA29,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PA29,
+ .wp_pin = -EINVAL,
+ },
};
static void __init cpu9krea_board_init(void)
@@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void)
/* Ethernet */
at91_add_device_eth(&cpu9krea_macb_data);
/* MMC */
- at91_add_device_mmc(0, &cpu9krea_mmc_data);
+ at91_add_device_mci(0, &cpu9krea_mci0_data);
/* I2C */
at91_add_device_i2c(cpu9krea_i2c_devices,
ARRAY_SIZE(cpu9krea_i2c_devices));
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2e6d043c82f..2cbd1a2b6c3 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
.pullup_pin = AT91_PIN_PC14,
};
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
- .det_pin = AT91_PIN_PC2,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC2,
+ .wp_pin = -EINVAL,
+ },
};
static struct physmap_flash_data cpuat91_flash_data = {
@@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void)
/* USB Device */
at91_add_device_udc(&cpuat91_udc_data);
/* MMC */
- at91_add_device_mmc(0, &cpuat91_mmc_data);
+ at91_add_device_mci(0, &cpuat91_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Platform devices */
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 462bc319cbc..3e37437a7a6 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
.rst_pin = AT91_PIN_PD2,
};
-static struct at91_mmc_data __initdata csb337_mmc_data = {
- .det_pin = AT91_PIN_PD5,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PD6,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PD5,
+ .wp_pin = AT91_PIN_PD6,
+ },
};
static struct spi_board_info csb337_spi_devices[] = {
@@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = {
static void __init csb337_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
@@ -240,7 +238,7 @@ static void __init csb337_board_init(void)
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &csb337_mmc_data);
+ at91_add_device_mci(0, &csb337_mci0_data);
/* NOR flash */
platform_device_register(&csb_flash);
/* LEDs */
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index d1e1f3fc0a4..0cfac16ee9d 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
.rst_pin = AT91_PIN_PC5,
};
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -113,7 +113,7 @@ static void __init eb9200_board_init(void)
at91_add_device_spi(NULL, 0);
/* MMC */
/* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mmc(0, &eb9200_mmc_data);
+ at91_add_device_mci(0, &eb9200_mci0_data);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 9c24cb25707..3d931ffac4b 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
static void __init ecb_at91board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
- at91_add_device_mmc(0, &ecb_at91mmc_data);
+ at91_add_device_mci(0, &ecbat91_mci0_data);
/* SPI */
at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+ /* LEDs */
+ at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
}
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 82bdfde3405..d93658a2b12 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
.pullup_pin = AT91_PIN_PB13,
};
-static struct at91_mmc_data __initdata eco920_mmc_data = {
- .slot_b = 0,
- .wire4 = 0,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+ .slot[0] = {
+ .bus_width = 1,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
static struct physmap_flash_data eco920_flash_data = {
@@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init eco920_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* DBGU on ttyS0. (Rx & Tx only */
at91_register_uart(0, 0, 0);
at91_add_device_serial();
@@ -104,7 +120,7 @@ static void __init eco920_board_init(void)
at91_add_device_usbh(&eco920_usbh_data);
at91_add_device_udc(&eco920_udc_data);
- at91_add_device_mmc(0, &eco920_mmc_data);
+ at91_add_device_mci(0, &eco920_mci0_data);
platform_device_register(&eco920_flash);
at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
@@ -127,6 +143,8 @@ static void __init eco920_board_init(void)
);
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+ /* LEDs */
+ at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
}
MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 6cc83a87d77..fa98abacb1b 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
};
/* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
+ },
};
/* LEDs */
@@ -152,7 +152,7 @@ static void __init flexibity_board_init(void)
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &flexibity_mmc_data);
+ at91_add_device_mci(0, &flexibity_mci0_data);
/* LEDs */
at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
}
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 69ab1247ef8..6e47071d820 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
* SPI devices.
*/
static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -247,7 +247,7 @@ static void __init foxg20_board_init(void)
/* Ethernet */
at91_add_device_eth(&foxg20_macb_data);
/* MMC */
- at91_add_device_mmc(0, &foxg20_mmc_data);
+ at91_add_device_mci(0, &foxg20_mci0_data);
/* I2C */
at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
/* LEDs */
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 64c1dbf88a0..86050da3ba5 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = {
.pullup_pin = AT91_PIN_PB7,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB4,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
static void __init kafa_board_init(void)
{
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -88,6 +97,8 @@ static void __init kafa_board_init(void)
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
}
MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 5d96cb85175..abe9fed7a3e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
.pullup_pin = AT91_PIN_PB22,
};
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
- .det_pin = AT91_PIN_PB2,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB2,
+ .wp_pin = -EINVAL,
+ },
};
static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.num_parts = ARRAY_SIZE(kb9202_nand_partition),
};
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC19,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PC18,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init kb9202_board_init(void)
{
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -121,13 +136,15 @@ static void __init kb9202_board_init(void)
/* USB Device */
at91_add_device_udc(&kb9202_udc_data);
/* MMC */
- at91_add_device_mmc(0, &kb9202_mmc_data);
+ at91_add_device_mci(0, &kb9202_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
+ /* LEDs */
+ at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
}
MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 18103c5d993..9cda3fd346a 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+ },
};
@@ -354,7 +355,7 @@ static void __init neocore926_board_init(void)
neocore926_add_device_ts();
/* MMC */
- at91_add_device_mmc(1, &neocore926_mmc_data);
+ at91_add_device_mci(0, &neocore926_mci0_data);
/* Ethernet */
at91_add_device_eth(&neocore926_macb_data);
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 12706550450..f83e1de699e 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.overcurrent_pin= {-EINVAL, -EINVAL},
};
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PA17,
+ },
};
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
@@ -112,7 +112,7 @@ static void __init picotux200_board_init(void)
at91_add_device_i2c(NULL, 0);
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &picotux200_mmc_data);
+ at91_add_device_mci(0, &picotux200_mci0_data);
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index bf351e28542..799f214edeb 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
/*
@@ -245,7 +245,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index cc2bf979607..66338e7ebfb 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
#endif
@@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = {
static void __init dk_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -208,7 +205,7 @@ static void __init dk_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &dk_mmc_data);
+ at91_add_device_mci(0, &dk_mci0_data);
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 62e19e64c9d..5d1b5729dc6 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PA17,
+ }
};
#endif
@@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -177,7 +174,7 @@ static void __init ek_board_init(void)
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index c3b43aefdb7..a0ecf04e9ae 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
/*
* SD/MC
*/
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+ },
};
/*
@@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = {
*/
static void __init rsi_ews_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
/* This one is for debugging */
@@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void)
at91_add_device_spi(rsi_ews_spi_devices,
ARRAY_SIZE(rsi_ews_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ at91_add_device_mci(0, &rsi_ews_mci0_data);
/* NOR Flash */
platform_device_register(&rsiews_nor_flash);
/* LEDs */
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 7bf6da70d7d..c5f01acce3c 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = AT91_PIN_PC8,
- .wp_pin = AT91_PIN_PC4,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PC8,
+ .wp_pin = AT91_PIN_PC4,
+ },
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA9,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
};
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -194,9 +209,11 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 889c1bf71eb..8cd6e679fbe 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void)
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+ .slot[1] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
@@ -329,7 +329,7 @@ static void __init ek_board_init(void)
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &ek_mci0_data);
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* SSC (to AT73C213) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 2269be5fa38..27b3af1a304 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = {
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ },
};
#endif /* CONFIG_SPI_ATMEL_* */
@@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = {
static void __init ek_board_init(void)
{
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -598,7 +596,7 @@ static void __init ek_board_init(void)
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
#else
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &mci0_data);
#endif
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 82adf581afc..073e17403d9 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+ },
};
@@ -420,7 +421,7 @@ static void __init ek_board_init(void)
/* Touchscreen */
ek_add_device_ts();
/* MMC */
- at91_add_device_mmc(1, &ek_mmc_data);
+ at91_add_device_mci(1, &mci1_data);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* NAND */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 4ea4ee00364..3ab2b86a376 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
@@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void)
* MCI (SD/MMC)
* wp_pin and vcc_pin are not connected
*/
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
@@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
},
};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1, /* Only one slot so use slot B */
- .wire4 = 1,
- .det_pin = AT91_PIN_PC9,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-#endif
static void __init ek_add_device_mmc(void)
{
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
-#else
- at91_add_device_mmc(0, &ek_mmc_data);
-#endif
}
/*
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index e7dc3ead704..fb89ea92e3f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
/*
* MCI (SD/MMC)
*/
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
- .det_pin = AT91_PIN_PA15,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PA15,
+ .wp_pin = -EINVAL,
+ },
};
@@ -303,7 +304,7 @@ static void __init ek_board_init(void)
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_mci(0, &mci0_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 29eae1626bf..c3fb31d5116 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -83,7 +83,6 @@ static void __init add_device_nand(void)
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
@@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = {
.wp_pin = -1,
},
};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-#endif
/*
@@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void)
/* NAND */
add_device_nand();
/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
/* W1 */
add_w1();
}
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1476b9fe7b..6ea069b5733 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
* SPI devices.
*/
static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
}
-#endif
};
static struct spi_board_info usb_a9g20_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 516d340549d..f162fdfd66e 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
/*
* MMC
*/
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
- .det_pin = AT91_PIN_PB9,
- .wire4 = 1,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB9,
+ .wp_pin = -EINVAL,
+ },
};
/*
@@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {}
static void __init yl9200_board_init(void)
{
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -568,7 +566,7 @@ static void __init yl9200_board_init(void)
/* I2C */
at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
/* MMC */
- at91_add_device_mmc(0, &yl9200_mmc_data);
+ at91_add_device_mci(0, &yl9200_mci0_data);
/* NAND */
at91_add_device_nand(&yl9200_nand_data);
/* NOR Flash */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 369afc2ffc5..c55a4364ffb 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,6 @@ struct at91_can_data {
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 8dfafe76ffe..1b1e62b5f41 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
#else
void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
- at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
- at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
- unsigned long is_off = at91_get_gpio_value(led);
- if (is_off)
- at91_led_on(led);
- else
- at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- at91_led_on(at91_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- at91_led_off(at91_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- at91_led_toggle(at91_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- at91_led_off(at91_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- at91_led_on(at91_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
- leds_event = at91_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index aed9eb66449..6da6940b365 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,5 +15,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
-leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
-obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index bbc449fbe14..00000000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/leds.c
- *
- * Integrator LED control routines
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 pddr;
-
- local_irq_save(flags);
- switch(ledevt) {
- case led_idle_start:
- break;
-
- case led_idle_end:
- break;
-
- case led_timer:
- pddr = clps_readb(PDDR);
- clps_writeb(pddr ^ 1, PDDR);
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_p720t())
- leds_event = p720t_leds_event;
-
- return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index f266d90b9ef..b752b586fc2 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
@@ -34,6 +36,8 @@
#include <asm/mach/map.h>
#include <mach/syspld.h>
+#include <asm/hardware/clps7111.h>
+
#include "common.h"
/*
@@ -107,6 +111,64 @@ static void __init p720t_init_early(void)
}
}
+/*
+ * LED controled by CPLD
+ */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void p720t_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ u8 reg = clps_readb(PDDR);
+
+ if (b != LED_OFF)
+ reg |= 0x1;
+ else
+ reg &= ~0x1;
+
+ clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+ u8 reg = clps_readb(PDDR);
+
+ return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_p720t())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "p720t:0";
+ cdev->brightness_set = p720t_led_set;
+ cdev->brightness_get = p720t_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+#endif
+
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac83580..935e4af01a2 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o io.o
+obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 99e14e36250..0398258c20c 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,52 +1,71 @@
/*
- * linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
*
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA-110 LED control routines. We use the led as follows:
- *
- * - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include "core.h"
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+static void ebsa110_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_lock_irqsave(&leds_lock, flags);
+ if (b != LED_OFF)
+ reg |= 0x80;
+ else
+ reg &= ~0x80;
- switch(ledevt) {
- case led_timer:
- *(volatile unsigned char *)SOFT_BASE ^= 128;
- break;
+ __raw_writeb(reg, SOFT_BASE);
+}
- default:
- break;
- }
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & 0x80) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
{
- if (machine_is_ebsa110())
- leds_event = ebsa110_leds_event;
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_ebsa110())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "ebsa110:0";
+ cdev->brightness_set = ebsa110_led_set;
+ cdev->brightness_get = ebsa110_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
+#endif
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6c3299ebbfc..412884dafa6 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -405,6 +405,8 @@ config MACH_EXYNOS4_DT
select USE_OF
select ARM_AMBA
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+ select PINCTRL
+ select PINCTRL_EXYNOS4
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 618d0aaaa59..f3171c3f3d9 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -547,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
};
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
+ .clk = {
+ .name = "mout_aclk_300_gscl_mid",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
+ [0] = &exynos5_clk_sclk_vpll.clk,
+ [1] = &exynos5_clk_mout_cpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
+ .sources = exynos5_clkset_aclk_300_mid1_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
+ .clk = {
+ .name = "mout_aclk_300_gscl_mid1",
+ },
+ .sources = &exynos5_clkset_aclk_300_gscl_mid1,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
+ [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
+ [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
+ .sources = exynos5_clkset_aclk_300_gscl_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
+ .clk = {
+ .name = "mout_aclk_300_gscl",
+ },
+ .sources = &exynos5_clkset_aclk_300_gscl,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_gscl_300_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &exynos5_clk_mout_aclk_300_gscl.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_gscl_300 = {
+ .sources = exynos5_clk_src_gscl_300_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
+ .clk = {
+ .name = "aclk_300_gscl",
+ },
+ .sources = &exynos5_clk_src_gscl_300,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
+};
+
static struct clk exynos5_init_clocks_off[] = {
{
.name = "timers",
@@ -755,6 +817,26 @@ static struct clk exynos5_init_clocks_off[] = {
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 18),
}, {
+ .name = "gscl",
+ .devname = "exynos-gsc.0",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.1",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.2",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "gscl",
+ .devname = "exynos-gsc.3",
+ .enable = exynos5_clk_ip_gscl_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
.name = SYSMMU_CLOCK_NAME,
.devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0),
.enable = &exynos5_clk_ip_mfc_ctrl,
@@ -1225,6 +1307,10 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_aclk_266,
&exynos5_clk_aclk_200,
&exynos5_clk_aclk_166,
+ &exynos5_clk_aclk_300_gscl,
+ &exynos5_clk_mout_aclk_300_gscl,
+ &exynos5_clk_mout_aclk_300_gscl_mid,
+ &exynos5_clk_mout_aclk_300_gscl_mid1,
&exynos5_clk_aclk_66_pre,
&exynos5_clk_aclk_66,
&exynos5_clk_dout_mmc0,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4eb39cdf75e..715b690e500 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void)
{
int irq;
+#ifdef CONFIG_PINCTRL_SAMSUNG
+ /*
+ * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
+ * functionality along with support for external gpio and wakeup
+ * interrupts. If the samsung pinctrl driver is enabled and includes
+ * the wakeup interrupt support, then the setting up external wakeup
+ * interrupts here can be skipped. This check here is temporary to
+ * allow exynos4 platforms that do not use Samsung pinctrl driver to
+ * co-exist with platforms that do. When all of the Samsung Exynos4
+ * platforms switch over to using the pinctrl driver, the wakeup
+ * interrupt support code here can be completely removed.
+ */
+ struct device_node *pctrl_np, *wkup_np;
+ const char *pctrl_compat = "samsung,pinctrl-exynos4210";
+ const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
+
+ for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+ if (of_device_is_available(pctrl_np)) {
+ wkup_np = of_find_compatible_node(pctrl_np, NULL,
+ wkup_compat);
+ if (wkup_np)
+ return -ENODEV;
+ }
+ }
+#endif
+
if (soc_is_exynos5250())
exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
else
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 6d33f50c2e5..5aa77f996e5 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -121,6 +121,11 @@
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+#define EXYNOS5_PA_GSC0 0x13E00000
+#define EXYNOS5_PA_GSC1 0x13E10000
+#define EXYNOS5_PA_GSC2 0x13E20000
+#define EXYNOS5_PA_GSC3 0x13E30000
+
#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS5_PA_SYSMMU_2D 0x10A60000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ef770bc2318..e707eb1b1ea 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -56,6 +56,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
+ "exynos-gsc.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
+ "exynos-gsc.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
+ "exynos-gsc.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
+ "exynos-gsc.3", NULL),
{},
};
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b25946..0b64dd430d6 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
-obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 5bd266754b9..00000000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Amber - On if system is not idle
- * - Red - currently unused
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
- hw_led_state |= XBUS_LED_AMBER;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= XBUS_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- *XBUS_LEDS = hw_led_state;
-
- spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_ebsa285())
- leds_event = ebsa285_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 27716a7e5fc..b09551ef89c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@@ -13,6 +15,85 @@
#include "common.h"
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct ebsa285_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} ebsa285_leds[] = {
+ { "ebsa285:amber", "heartbeat", },
+ { "ebsa285:green", "cpu0", },
+ { "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ if (b != LED_OFF)
+ *XBUS_LEDS |= led->mask;
+ else
+ *XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+ int i;
+
+ if (machine_is_ebsa285())
+ return -ENODEV;
+
+ /* 3 LEDS All ON */
+ *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+ for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+ struct ebsa285_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = ebsa285_leds[i].name;
+ led->cdev.brightness_set = ebsa285_led_set;
+ led->cdev.brightness_get = ebsa285_led_get;
+ led->cdev.default_trigger = ebsa285_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+#endif
+
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index cac9f67e7da..d2d14339c6c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/system_misc.h>
@@ -27,13 +28,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS 0
-#else
-#define DEFAULT_LEDS GPIO_GREEN_LED
-#endif
-
/*
* Winbond WB83977F accessibility stuff
*/
@@ -611,15 +605,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
- unsigned long flags;
-
wb977_init();
cpld_init();
rwa010_init();
-
- raw_spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd)
}
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct netwinder_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} netwinder_leds[] = {
+ { "netwinder:green", "heartbeat", },
+ { "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+ nw_gpio_modify_op(led->mask, reg);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+ return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_netwinder())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+ struct netwinder_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = netwinder_leds[i].name;
+ led->cdev.brightness_set = netwinder_led_set;
+ led->cdev.brightness_get = netwinder_led_get;
+ led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = GPIO_GREEN_LED;
+ else
+ led->mask = GPIO_RED_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+#endif
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 5a2bd89cbdc..00000000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - On if the system is not idle
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = GPIO_GREEN_LED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= GPIO_GREEN_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_GREEN_LED;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- default:
- break;
- }
-
- raw_spin_unlock_irqrestore(&leds_lock, flags);
-
- if (led_state & LED_STATE_ENABLED) {
- raw_spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
- }
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_netwinder())
- leds_event = netwinder_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef966e1f..5521d18bf19 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
# Object file lists.
-obj-y := core.o lm.o
+obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index a432d4325f8..dad3cb74ed3 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -28,7 +28,6 @@
#include <mach/cm.h>
#include <mach/irqs.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
@@ -128,8 +127,6 @@ static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57adb04..1a78692e32a 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
+#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 466defa9784..7a7f6d3273b 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,90 +1,125 @@
/*
- * linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
*
- * Integrator/AP and Integrator/CP LED control routines
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-static int saved_leds;
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
-static void integrator_leds_event(led_event_t ledevt)
+struct integrator_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} integrator_leds[] = {
+ { "integrator:green0", "heartbeat", },
+ { "integrator:yellow", },
+ { "integrator:red", },
+ { "integrator:green1", },
+ { "integrator:core_module", "cpu0", },
+};
+
+static void integrator_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
- const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
- unsigned int update_alpha_leds;
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- // yup, change the LEDs
- local_irq_save(flags);
- update_alpha_leds = 0;
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
- switch(ledevt) {
- case led_idle_start:
- cm_control(CM_CTRL_LED, 0);
- break;
+ while (__raw_readl(ALPHA_REG) & 1)
+ cpu_relax();
- case led_idle_end:
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- break;
+ __raw_writel(reg, LEDREG);
+}
- case led_timer:
- saved_leds ^= GREEN_LED;
- update_alpha_leds = 1;
- break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- case led_red_on:
- saved_leds |= RED_LED;
- update_alpha_leds = 1;
- break;
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- case led_red_off:
- saved_leds &= ~RED_LED;
- update_alpha_leds = 1;
- break;
+static void cm_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ if (b != LED_OFF)
+ cm_control(CM_CTRL_LED, CM_CTRL_LED);
+ else
+ cm_control(CM_CTRL_LED, 0);
+}
- default:
- break;
- }
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+ u32 reg = readl(CM_CTRL);
- if (update_alpha_leds) {
- while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
- __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
- }
- local_irq_restore(flags);
+ return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
{
- if (machine_is_integrator() || machine_is_cintegrator())
- leds_event = integrator_leds_event;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+ struct integrator_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+
+ led->cdev.name = integrator_leds[i].name;
+
+ if (i == 4) { /* Setting for LED in core module */
+ led->cdev.brightness_set = cm_led_set;
+ led->cdev.brightness_get = cm_led_get;
+ } else {
+ led->cdev.brightness_set = integrator_led_set;
+ led->cdev.brightness_get = integrator_led_get;
+ }
+
+ led->cdev.default_trigger = integrator_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
return 0;
}
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
+#endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9133c..9324ef965c2 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
-# LEDs
-obj-$(CONFIG_LEDS) += leds.o
-
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 73bd6381287..47399bc3c02 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
}
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- gpio_direction_output(cpu_led, 1);
- gpio_direction_output(timer_led, 1);
-
- ks8695_leds_cpu = cpu_led;
- ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9aa7d1..1e6594a0f29 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd70754729..00000000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
- gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
- gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
- unsigned long is_off = gpio_get_value(led);
- if (is_off)
- ks8695_led_on(led);
- else
- ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- ks8695_led_toggle(ks8695_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
- return -ENODEV;
-
- leds_event = ks8695_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 398e9e53e18..cd169c38616 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -61,14 +61,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af283a2bc7c..376f7f29ef7 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -307,12 +308,39 @@ static struct platform_device h2_irda_device = {
.resource = h2_irda_resources,
};
+static struct gpio_led h2_gpio_led_pins[] = {
+ {
+ .name = "h2:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h2:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+ .leds = h2_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h2_gpio_led_data,
+ },
+};
+
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
+ &h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@@ -407,6 +435,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
h2_smc91x_resources[1].start = gpio_to_irq(0);
h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 06d11b1ee9c..ededdb7ef28 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -325,6 +326,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
+static struct gpio_led h3_gpio_led_pins[] = {
+ {
+ .name = "h3:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h3:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+ .leds = h3_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3_gpio_led_data,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -332,6 +359,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@@ -399,6 +427,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
smc91x_resources[1].start = gpio_to_irq(40);
smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 2f1f9b96757..5973945a874 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -382,10 +382,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
+static struct gpio_led mistral_gpio_led_pins[] = {
+ {
+ .name = "mistral:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "mistral:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+ .leds = mistral_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_gpio_led_data,
+ },
+};
+
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
+ &mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@@ -510,6 +537,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
+ /*
+ * GPIO based LEDs
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index 6f958aec945..00000000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (!fpga)
- fpga = ioremap(H2P2_DBG_FPGA_START,
- H2P2_DBG_FPGA_SIZE);
- if (fpga) {
- led_state |= LED_STATE_ENABLED;
- __raw_writew(~0, &fpga->leds);
- }
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (! machine_is_omap_perseus2()) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- led_state &= ~LED_STATE_ENABLED;
- if (fpga) {
- __raw_writew(~0, &fpga->leds);
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
- }
- }
-
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (machine_is_omap_perseus2())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED && fpga)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8d02..00000000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= 0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= 0;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~0;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426b84..00000000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED (1 << 0)
-#define LED_STATE_CLAIMED (1 << 1)
-static u8 led_state;
-
-#define TIMER_LED (1 << 3) /* Mistral board */
-#define IDLE_LED (1 << 4) /* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context. This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
- int red = 0;
- int green = 0;
-
- if (hw_led_state & TIMER_LED)
- red = 1;
- else if (hw_led_state & IDLE_LED)
- green = 1;
- /* else both sides are disabled */
-
- gpio_set_value(GPIO_LED_GREEN, green);
- gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
- unsigned long flags;
- u16 leds;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- leds = hw_led_state;
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_halted:
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
- case led_timer:
- hw_led_state ^= TIMER_LED;
- mistral_setled();
- break;
-
- case led_idle_start: /* idle == off */
- hw_led_state &= ~IDLE_LED;
- mistral_setled();
- break;
-
- case led_idle_end:
- hw_led_state |= IDLE_LED;
- mistral_setled();
- break;
-
-#endif /* CONFIG_OMAP_OSK_MISTRAL */
-
- default:
- break;
- }
-
- leds ^= hw_led_state;
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 4071479f710..00000000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
- if (!cpu_class_is_omap1())
- return -ENODEV;
-
- if (machine_is_omap_innovator())
- leds_event = innovator_leds_event;
-
- else if (machine_is_omap_h2()
- || machine_is_omap_h3()
- || machine_is_omap_perseus2())
- leds_event = h2p2_dbg_leds_event;
-
- else if (machine_is_omap_osk())
- leds_event = osk_leds_event;
-
- else
- return -1;
-
- if (machine_is_omap_h2()
- || machine_is_omap_h3()
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- || machine_is_omap_osk()
-#endif
- ) {
-
- /* LED1/LED2 pins can be used as GPIO (as done here), or by
- * the LPG (works even in deep sleep!), to drive a bicolor
- * LED on the H2 sample board, and another on the H2/P2
- * "surfer" expansion board.
- *
- * The same pins drive a LED on the OSK Mistral board, but
- * that's a different kind of LED (just one color at a time).
- */
- omap_cfg_reg(P18_1610_GPIO3);
- if (gpio_request(3, "LED red") == 0)
- gpio_direction_output(3, 1);
- else
- printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
- omap_cfg_reg(MPUIO4);
- if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
- gpio_direction_output(OMAP_MPUIO(4), 1);
- else
- printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
- }
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc376..00000000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4062480bfec..4d4816fd6fc 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -44,7 +44,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index eae49c3980c..74529549130 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,7 +46,6 @@
#include <linux/clockchips.h>
#include <linux/io.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index edc30b8b77e..a6219eaf1f6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -48,6 +48,7 @@ config ARCH_OMAP3
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
+ select OMAP_INTERCONNECT
config ARCH_OMAP4
bool "TI OMAP4"
@@ -67,6 +68,7 @@ config ARCH_OMAP4
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+ select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 845202358dd..7d6abda3b74 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -180,11 +180,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
-# L3 interconnect
-obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_l3_noc.o
-obj-$(CONFIG_SOC_OMAP5) += omap_l3_noc.o
-
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
deleted file mode 100644
index f447e02102b..00000000000
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include "soc.h"
-#include "omap_l3_noc.h"
-
-/*
- * Interrupt Handler for L3 error detection.
- * 1) Identify the L3 clockdomain partition to which the error belongs to.
- * 2) Identify the slave where the error information is logged
- * 3) Print the logged information.
- * 4) Add dump stack to provide kernel trace.
- *
- * Two Types of errors :
- * 1) Custom errors in L3 :
- * Target like DMM/FW/EMIF generates SRESP=ERR error
- * 2) Standard L3 error:
- * - Unsupported CMD.
- * L3 tries to access target while it is idle
- * - OCP disconnect.
- * - Address hole error:
- * If DSS/ISS/FDIF/USBHOSTFS access a target where they
- * do not have connectivity, the error is logged in
- * their default target which is DMM2.
- *
- * On High Secure devices, firewall errors are possible and those
- * can be trapped as well. But the trapping is implemented as part
- * secure software and hence need not be implemented here.
- */
-static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
-{
-
- struct omap4_l3 *l3 = _l3;
- int inttype, i, k;
- int err_src = 0;
- u32 std_err_main, err_reg, clear, masterid;
- void __iomem *base, *l3_targ_base;
- char *target_name, *master_name = "UN IDENTIFIED";
-
- /* Get the Type of interrupt */
- inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-
- for (i = 0; i < L3_MODULES; i++) {
- /*
- * Read the regerr register of the clock domain
- * to determine the source
- */
- base = l3->l3_base[i];
- err_reg = __raw_readl(base + l3_flagmux[i] +
- + L3_FLAGMUX_REGERR0 + (inttype << 3));
-
- /* Get the corresponding error and analyse */
- if (err_reg) {
- /* Identify the source from control status register */
- err_src = __ffs(err_reg);
-
- /* Read the stderrlog_main_source from clk domain */
- l3_targ_base = base + *(l3_targ[i] + err_src);
- std_err_main = __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
- masterid = __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_MSTADDR);
-
- switch (std_err_main & CUSTOM_ERROR) {
- case STANDARD_ERROR:
- target_name =
- l3_targ_inst_name[i][err_src];
- WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
- target_name,
- __raw_readl(l3_targ_base +
- L3_TARG_STDERRLOG_SLVOFSLSB));
- /* clear the std error log*/
- clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
- break;
-
- case CUSTOM_ERROR:
- target_name =
- l3_targ_inst_name[i][err_src];
- for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
- if (masterid == l3_masters[k].id)
- master_name =
- l3_masters[k].name;
- }
- WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
- master_name, target_name);
- /* clear the std error log*/
- clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, l3_targ_base +
- L3_TARG_STDERRLOG_MAIN);
- break;
-
- default:
- /* Nothing to be handled here as of now */
- break;
- }
- /* Error found so break the for loop */
- break;
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __devinit omap4_l3_probe(struct platform_device *pdev)
-{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
-
- l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
- if (!l3)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, l3);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "couldn't find resource 0\n");
- ret = -ENODEV;
- goto err0;
- }
-
- l3->l3_base[0] = ioremap(res->start, resource_size(res));
- if (!l3->l3_base[0]) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto err0;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- dev_err(&pdev->dev, "couldn't find resource 1\n");
- ret = -ENODEV;
- goto err1;
- }
-
- l3->l3_base[1] = ioremap(res->start, resource_size(res));
- if (!l3->l3_base[1]) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- if (!res) {
- dev_err(&pdev->dev, "couldn't find resource 2\n");
- ret = -ENODEV;
- goto err2;
- }
-
- l3->l3_base[2] = ioremap(res->start, resource_size(res));
- if (!l3->l3_base[2]) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto err2;
- }
-
- /*
- * Setup interrupt Handlers
- */
- l3->debug_irq = platform_get_irq(pdev, 0);
- ret = request_irq(l3->debug_irq,
- l3_interrupt_handler,
- IRQF_DISABLED, "l3-dbg-irq", l3);
- if (ret) {
- pr_crit("L3: request_irq failed to register for 0x%x\n",
- 9 + OMAP44XX_IRQ_GIC_START);
- goto err3;
- }
-
- l3->app_irq = platform_get_irq(pdev, 1);
- ret = request_irq(l3->app_irq,
- l3_interrupt_handler,
- IRQF_DISABLED, "l3-app-irq", l3);
- if (ret) {
- pr_crit("L3: request_irq failed to register for 0x%x\n",
- 10 + OMAP44XX_IRQ_GIC_START);
- goto err4;
- }
-
- return 0;
-
-err4:
- free_irq(l3->debug_irq, l3);
-err3:
- iounmap(l3->l3_base[2]);
-err2:
- iounmap(l3->l3_base[1]);
-err1:
- iounmap(l3->l3_base[0]);
-err0:
- kfree(l3);
- return ret;
-}
-
-static int __devexit omap4_l3_remove(struct platform_device *pdev)
-{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
-
- free_irq(l3->app_irq, l3);
- free_irq(l3->debug_irq, l3);
- iounmap(l3->l3_base[0]);
- iounmap(l3->l3_base[1]);
- iounmap(l3->l3_base[2]);
- kfree(l3);
-
- return 0;
-}
-
-#if defined(CONFIG_OF)
-static const struct of_device_id l3_noc_match[] = {
- {.compatible = "ti,omap4-l3-noc", },
- {},
-};
-MODULE_DEVICE_TABLE(of, l3_noc_match);
-#else
-#define l3_noc_match NULL
-#endif
-
-static struct platform_driver omap4_l3_driver = {
- .probe = omap4_l3_probe,
- .remove = __devexit_p(omap4_l3_remove),
- .driver = {
- .name = "omap_l3_noc",
- .owner = THIS_MODULE,
- .of_match_table = l3_noc_match,
- },
-};
-
-static int __init omap4_l3_init(void)
-{
- return platform_driver_register(&omap4_l3_driver);
-}
-postcore_initcall_sync(omap4_l3_init);
-
-static void __exit omap4_l3_exit(void)
-{
- platform_driver_unregister(&omap4_l3_driver);
-}
-module_exit(omap4_l3_exit);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
deleted file mode 100644
index a6ce34dc481..00000000000
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-#define L3_MODULES 3
-#define CLEAR_STDERR_LOG (1 << 31)
-#define CUSTOM_ERROR 0x2
-#define STANDARD_ERROR 0x0
-#define INBAND_ERROR 0x0
-#define L3_APPLICATION_ERROR 0x0
-#define L3_DEBUG_ERROR 0x1
-
-/* L3 TARG register offsets */
-#define L3_TARG_STDERRLOG_MAIN 0x48
-#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
-#define L3_TARG_STDERRLOG_MSTADDR 0x68
-#define L3_FLAGMUX_REGERR0 0xc
-
-#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
-
-static u32 l3_flagmux[L3_MODULES] = {
- 0x500,
- 0x1000,
- 0X0200
-};
-
-/* L3 Target standard Error register offsets */
-static u32 l3_targ_inst_clk1[] = {
- 0x100, /* DMM1 */
- 0x200, /* DMM2 */
- 0x300, /* ABE */
- 0x400, /* L4CFG */
- 0x600, /* CLK2 PWR DISC */
- 0x0, /* Host CLK1 */
- 0x900 /* L4 Wakeup */
-};
-
-static u32 l3_targ_inst_clk2[] = {
- 0x500, /* CORTEX M3 */
- 0x300, /* DSS */
- 0x100, /* GPMC */
- 0x400, /* ISS */
- 0x700, /* IVAHD */
- 0xD00, /* missing in TRM corresponds to AES1*/
- 0x900, /* L4 PER0*/
- 0x200, /* OCMRAM */
- 0x100, /* missing in TRM corresponds to GPMC sERROR*/
- 0x600, /* SGX */
- 0x800, /* SL2 */
- 0x1600, /* C2C */
- 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF00, /* missing in TRM corrsponds to SHA1*/
- 0xE00, /* missing in TRM corresponds to AES2*/
- 0xC00, /* L4 PER3 */
- 0xA00, /* L4 PER1*/
- 0xB00, /* L4 PER2*/
- 0x0, /* HOST CLK2 */
- 0x1800, /* CAL */
- 0x1700 /* LLI */
-};
-
-static u32 l3_targ_inst_clk3[] = {
- 0x0100 /* EMUSS */,
- 0x0300, /* DEBUGSS_CT_TBR */
- 0x0 /* HOST CLK3 */
-};
-
-static struct l3_masters_data {
- u32 id;
- char name[10];
-} l3_masters[] = {
- { 0x0 , "MPU"},
- { 0x10, "CS_ADP"},
- { 0x14, "xxx"},
- { 0x20, "DSP"},
- { 0x30, "IVAHD"},
- { 0x40, "ISS"},
- { 0x44, "DucatiM3"},
- { 0x48, "FaceDetect"},
- { 0x50, "SDMA_Rd"},
- { 0x54, "SDMA_Wr"},
- { 0x58, "xxx"},
- { 0x5C, "xxx"},
- { 0x60, "SGX"},
- { 0x70, "DSS"},
- { 0x80, "C2C"},
- { 0x88, "xxx"},
- { 0x8C, "xxx"},
- { 0x90, "HSI"},
- { 0xA0, "MMC1"},
- { 0xA4, "MMC2"},
- { 0xA8, "MMC6"},
- { 0xB0, "UNIPRO1"},
- { 0xC0, "USBHOSTHS"},
- { 0xC4, "USBOTGHS"},
- { 0xC8, "USBHOSTFS"}
-};
-
-static char *l3_targ_inst_name[L3_MODULES][21] = {
- {
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
- "HOST CLK1",
- "L4 WAKEUP"
- },
- {
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
- "HOST CLK2",
- "CAL",
- "LLI"
- },
- {
- "EMUSS",
- "DEBUG SOURCE",
- "HOST CLK3"
- },
-};
-
-static u32 *l3_targ[L3_MODULES] = {
- l3_targ_inst_clk1,
- l3_targ_inst_clk2,
- l3_targ_inst_clk3,
-};
-
-struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
-
- /* memory base */
- void __iomem *l3_base[L3_MODULES];
-
- int debug_irq;
- int app_irq;
-};
-#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
deleted file mode 100644
index acc216491b8..00000000000
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include "omap_l3_smx.h"
-
-static inline u64 omap3_l3_readll(void __iomem *base, u16 reg)
-{
- return __raw_readll(base + reg);
-}
-
-static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value)
-{
- __raw_writell(value, base + reg);
-}
-
-static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error)
-{
- return (error & 0x0f000000) >> L3_ERROR_LOG_CODE;
-}
-
-static inline u32 omap3_l3_decode_addr(u64 error_addr)
-{
- return error_addr & 0xffffffff;
-}
-
-static inline unsigned omap3_l3_decode_cmd(u64 error)
-{
- return (error & 0x07) >> L3_ERROR_LOG_CMD;
-}
-
-static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error)
-{
- return (error & 0xff00) >> L3_ERROR_LOG_INITID;
-}
-
-static inline unsigned omap3_l3_decode_req_info(u64 error)
-{
- return (error >> 32) & 0xffff;
-}
-
-static char *omap3_l3_code_string(u8 code)
-{
- switch (code) {
- case OMAP_L3_CODE_NOERROR:
- return "No Error";
- case OMAP_L3_CODE_UNSUP_CMD:
- return "Unsupported Command";
- case OMAP_L3_CODE_ADDR_HOLE:
- return "Address Hole";
- case OMAP_L3_CODE_PROTECT_VIOLATION:
- return "Protection Violation";
- case OMAP_L3_CODE_IN_BAND_ERR:
- return "In-band Error";
- case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT:
- return "Request Timeout Not Accepted";
- case OMAP_L3_CODE_REQ_TOUT_NO_RESP:
- return "Request Timeout, no response";
- default:
- return "UNKNOWN error";
- }
-}
-
-static char *omap3_l3_initiator_string(u8 initid)
-{
- switch (initid) {
- case OMAP_L3_LCD:
- return "LCD";
- case OMAP_L3_SAD2D:
- return "SAD2D";
- case OMAP_L3_IA_MPU_SS_1:
- case OMAP_L3_IA_MPU_SS_2:
- case OMAP_L3_IA_MPU_SS_3:
- case OMAP_L3_IA_MPU_SS_4:
- case OMAP_L3_IA_MPU_SS_5:
- return "MPU";
- case OMAP_L3_IA_IVA_SS_1:
- case OMAP_L3_IA_IVA_SS_2:
- case OMAP_L3_IA_IVA_SS_3:
- return "IVA_SS";
- case OMAP_L3_IA_IVA_SS_DMA_1:
- case OMAP_L3_IA_IVA_SS_DMA_2:
- case OMAP_L3_IA_IVA_SS_DMA_3:
- case OMAP_L3_IA_IVA_SS_DMA_4:
- case OMAP_L3_IA_IVA_SS_DMA_5:
- case OMAP_L3_IA_IVA_SS_DMA_6:
- return "IVA_SS_DMA";
- case OMAP_L3_IA_SGX:
- return "SGX";
- case OMAP_L3_IA_CAM_1:
- case OMAP_L3_IA_CAM_2:
- case OMAP_L3_IA_CAM_3:
- return "CAM";
- case OMAP_L3_IA_DAP:
- return "DAP";
- case OMAP_L3_SDMA_WR_1:
- case OMAP_L3_SDMA_WR_2:
- return "SDMA_WR";
- case OMAP_L3_SDMA_RD_1:
- case OMAP_L3_SDMA_RD_2:
- case OMAP_L3_SDMA_RD_3:
- case OMAP_L3_SDMA_RD_4:
- return "SDMA_RD";
- case OMAP_L3_USBOTG:
- return "USB_OTG";
- case OMAP_L3_USBHOST:
- return "USB_HOST";
- default:
- return "UNKNOWN Initiator";
- }
-}
-
-/*
- * omap3_l3_block_irq - handles a register block's irq
- * @l3: struct omap3_l3 *
- * @base: register block base address
- * @error: L3_ERROR_LOG register of our block
- *
- * Called in hard-irq context. Caller should take care of locking
- *
- * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error
- * Analysis Sequence, we are following that sequence here, please
- * refer to that Figure for more information on the subject.
- */
-static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
- u64 error, int error_addr)
-{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
-
- pr_err("%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "", address);
- WARN_ON(1);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
-{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
-
- int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
- if (!int_type) {
- status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
- /*
- * if we have a timeout error, there's nothing we can
- * do besides rebooting the board. So let's BUG on any
- * of such errors and handle the others. timeout error
- * is severe and not expected to occur.
- */
- BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
- } else {
- status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
- /* No timeout error for debug sources */
- }
-
- /* identify the error source */
- err_source = __ffs(status);
-
- base = l3->rt + omap3_l3_bases[int_type][err_source];
- error = omap3_l3_readll(base, L3_ERROR_LOG);
- if (error) {
- error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
- ret |= omap3_l3_block_irq(l3, error, error_addr);
- }
-
- /* Clear the status register */
- clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
- L3_AGENT_STATUS_CLEAR_TA;
- omap3_l3_writell(base, L3_AGENT_STATUS, clear);
-
- /* clear the error log register */
- omap3_l3_writell(base, L3_ERROR_LOG, error);
-
- return ret;
-}
-
-static int __init omap3_l3_probe(struct platform_device *pdev)
-{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
-
- l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
- if (!l3)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, l3);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "couldn't find resource\n");
- ret = -ENODEV;
- goto err0;
- }
- l3->rt = ioremap(res->start, resource_size(res));
- if (!l3->rt) {
- dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto err0;
- }
-
- l3->debug_irq = platform_get_irq(pdev, 0);
- ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "l3-debug-irq", l3);
- if (ret) {
- dev_err(&pdev->dev, "couldn't request debug irq\n");
- goto err1;
- }
-
- l3->app_irq = platform_get_irq(pdev, 1);
- ret = request_irq(l3->app_irq, omap3_l3_app_irq,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "l3-app-irq", l3);
- if (ret) {
- dev_err(&pdev->dev, "couldn't request app irq\n");
- goto err2;
- }
-
- return 0;
-
-err2:
- free_irq(l3->debug_irq, l3);
-err1:
- iounmap(l3->rt);
-err0:
- kfree(l3);
- return ret;
-}
-
-static int __exit omap3_l3_remove(struct platform_device *pdev)
-{
- struct omap3_l3 *l3 = platform_get_drvdata(pdev);
-
- free_irq(l3->app_irq, l3);
- free_irq(l3->debug_irq, l3);
- iounmap(l3->rt);
- kfree(l3);
-
- return 0;
-}
-
-static struct platform_driver omap3_l3_driver = {
- .remove = __exit_p(omap3_l3_remove),
- .driver = {
- .name = "omap_l3_smx",
- },
-};
-
-static int __init omap3_l3_init(void)
-{
- return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe);
-}
-postcore_initcall_sync(omap3_l3_init);
-
-static void __exit omap3_l3_exit(void)
-{
- platform_driver_unregister(&omap3_l3_driver);
-}
-module_exit(omap3_l3_exit);
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
deleted file mode 100644
index 4f3cebca417..00000000000
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-/* Register definitions. All 64-bit wide */
-#define L3_COMPONENT 0x000
-#define L3_CORE 0x018
-#define L3_AGENT_CONTROL 0x020
-#define L3_AGENT_STATUS 0x028
-#define L3_ERROR_LOG 0x058
-
-#define L3_ERROR_LOG_MULTI (1 << 31)
-#define L3_ERROR_LOG_SECONDARY (1 << 30)
-
-#define L3_ERROR_LOG_ADDR 0x060
-
-/* Register definitions for Sideband Interconnect */
-#define L3_SI_CONTROL 0x020
-#define L3_SI_FLAG_STATUS_0 0x510
-
-static const u64 shift = 1;
-
-#define L3_STATUS_0_MPUIA_BRST (shift << 0)
-#define L3_STATUS_0_MPUIA_RSP (shift << 1)
-#define L3_STATUS_0_MPUIA_INBAND (shift << 2)
-#define L3_STATUS_0_IVAIA_BRST (shift << 6)
-#define L3_STATUS_0_IVAIA_RSP (shift << 7)
-#define L3_STATUS_0_IVAIA_INBAND (shift << 8)
-#define L3_STATUS_0_SGXIA_BRST (shift << 9)
-#define L3_STATUS_0_SGXIA_RSP (shift << 10)
-#define L3_STATUS_0_SGXIA_MERROR (shift << 11)
-#define L3_STATUS_0_CAMIA_BRST (shift << 12)
-#define L3_STATUS_0_CAMIA_RSP (shift << 13)
-#define L3_STATUS_0_CAMIA_INBAND (shift << 14)
-#define L3_STATUS_0_DISPIA_BRST (shift << 15)
-#define L3_STATUS_0_DISPIA_RSP (shift << 16)
-#define L3_STATUS_0_DMARDIA_BRST (shift << 18)
-#define L3_STATUS_0_DMARDIA_RSP (shift << 19)
-#define L3_STATUS_0_DMAWRIA_BRST (shift << 21)
-#define L3_STATUS_0_DMAWRIA_RSP (shift << 22)
-#define L3_STATUS_0_USBOTGIA_BRST (shift << 24)
-#define L3_STATUS_0_USBOTGIA_RSP (shift << 25)
-#define L3_STATUS_0_USBOTGIA_INBAND (shift << 26)
-#define L3_STATUS_0_USBHOSTIA_BRST (shift << 27)
-#define L3_STATUS_0_USBHOSTIA_INBAND (shift << 28)
-#define L3_STATUS_0_SMSTA_REQ (shift << 48)
-#define L3_STATUS_0_GPMCTA_REQ (shift << 49)
-#define L3_STATUS_0_OCMRAMTA_REQ (shift << 50)
-#define L3_STATUS_0_OCMROMTA_REQ (shift << 51)
-#define L3_STATUS_0_IVATA_REQ (shift << 54)
-#define L3_STATUS_0_SGXTA_REQ (shift << 55)
-#define L3_STATUS_0_SGXTA_SERROR (shift << 56)
-#define L3_STATUS_0_GPMCTA_SERROR (shift << 57)
-#define L3_STATUS_0_L4CORETA_REQ (shift << 58)
-#define L3_STATUS_0_L4PERTA_REQ (shift << 59)
-#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
-#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
- | L3_STATUS_0_MAD2DTA_REQ)
-
-#define L3_SI_FLAG_STATUS_1 0x530
-
-#define L3_STATUS_1_MPU_DATAIA (1 << 0)
-#define L3_STATUS_1_DAPIA0 (1 << 3)
-#define L3_STATUS_1_DAPIA1 (1 << 4)
-#define L3_STATUS_1_IVAIA (1 << 6)
-
-#define L3_PM_ERROR_LOG 0x020
-#define L3_PM_CONTROL 0x028
-#define L3_PM_ERROR_CLEAR_SINGLE 0x030
-#define L3_PM_ERROR_CLEAR_MULTI 0x038
-#define L3_PM_REQ_INFO_PERMISSION(n) (0x048 + (0x020 * n))
-#define L3_PM_READ_PERMISSION(n) (0x050 + (0x020 * n))
-#define L3_PM_WRITE_PERMISSION(n) (0x058 + (0x020 * n))
-#define L3_PM_ADDR_MATCH(n) (0x060 + (0x020 * n))
-
-/* L3 error log bit fields. Common for IA and TA */
-#define L3_ERROR_LOG_CODE 24
-#define L3_ERROR_LOG_INITID 8
-#define L3_ERROR_LOG_CMD 0
-
-/* L3 agent status bit fields. */
-#define L3_AGENT_STATUS_CLEAR_IA 0x10000000
-#define L3_AGENT_STATUS_CLEAR_TA 0x01000000
-
-#define OMAP34xx_IRQ_L3_APP 10
-#define L3_APPLICATION_ERROR 0x0
-#define L3_DEBUG_ERROR 0x1
-
-enum omap3_l3_initiator_id {
- /* LCD has 1 ID */
- OMAP_L3_LCD = 29,
- /* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
- /* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
- /* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
- /* IVA 2.2 SS DMA has 6 IDS */
- OMAP_L3_IA_IVA_SS_DMA_1 = 19,
- OMAP_L3_IA_IVA_SS_DMA_2 = 18,
- OMAP_L3_IA_IVA_SS_DMA_3 = 17,
- OMAP_L3_IA_IVA_SS_DMA_4 = 16,
- OMAP_L3_IA_IVA_SS_DMA_5 = 15,
- OMAP_L3_IA_IVA_SS_DMA_6 = 14,
- /* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
- /* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
- /* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
- /* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
- /* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
- /* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
- /* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
-};
-
-enum omap3_l3_code {
- OMAP_L3_CODE_NOERROR = 0,
- OMAP_L3_CODE_UNSUP_CMD = 1,
- OMAP_L3_CODE_ADDR_HOLE = 2,
- OMAP_L3_CODE_PROTECT_VIOLATION = 3,
- OMAP_L3_CODE_IN_BAND_ERR = 4,
- /* codes 5 and 6 are reserved */
- OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT = 7,
- OMAP_L3_CODE_REQ_TOUT_NO_RESP = 8,
- /* codes 9 - 15 are also reserved */
-};
-
-struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
-
- /* memory base*/
- void __iomem *rt;
-
- int debug_irq;
- int app_irq;
-
- /* true when and inband functional error occurs */
- unsigned inband:1;
-};
-
-/* offsets for l3 agents in order with the Flag status register */
-static unsigned int omap3_l3_app_bases[] = {
- /* MPU IA */
- 0x1400,
- 0x1400,
- 0x1400,
- /* RESERVED */
- 0,
- 0,
- 0,
- /* IVA 2.2 IA */
- 0x1800,
- 0x1800,
- 0x1800,
- /* SGX IA */
- 0x1c00,
- 0x1c00,
- /* RESERVED */
- 0,
- /* CAMERA IA */
- 0x5800,
- 0x5800,
- 0x5800,
- /* DISPLAY IA */
- 0x5400,
- 0x5400,
- /* RESERVED */
- 0,
- /*SDMA RD IA */
- 0x4c00,
- 0x4c00,
- /* RESERVED */
- 0,
- /* SDMA WR IA */
- 0x5000,
- 0x5000,
- /* RESERVED */
- 0,
- /* USB OTG IA */
- 0x4400,
- 0x4400,
- 0x4400,
- /* USB HOST IA */
- 0x4000,
- 0x4000,
- /* RESERVED */
- 0,
- 0,
- 0,
- 0,
- /* SAD2D IA */
- 0x3000,
- 0x3000,
- 0x3000,
- /* RESERVED */
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- /* SMA TA */
- 0x2000,
- /* GPMC TA */
- 0x2400,
- /* OCM RAM TA */
- 0x2800,
- /* OCM ROM TA */
- 0x2C00,
- /* L4 CORE TA */
- 0x6800,
- /* L4 PER TA */
- 0x6c00,
- /* IVA 2.2 TA */
- 0x6000,
- /* SGX TA */
- 0x6400,
- /* L4 EMU TA */
- 0x7000,
- /* GPMC TA */
- 0x2400,
- /* L4 CORE TA */
- 0x6800,
- /* L4 PER TA */
- 0x6c00,
- /* L4 EMU TA */
- 0x7000,
- /* MAD2D TA */
- 0x3400,
- /* RESERVED */
- 0,
- 0,
-};
-
-static unsigned int omap3_l3_debug_bases[] = {
- /* MPU DATA IA */
- 0x1400,
- /* RESERVED */
- 0,
- 0,
- /* DAP IA */
- 0x5c00,
- 0x5c00,
- /* RESERVED */
- 0,
- /* IVA 2.2 IA */
- 0x1800,
- /* REST RESERVED */
-};
-
-static u32 *omap3_l3_bases[] = {
- omap3_l3_app_bases,
- omap3_l3_debug_bases,
-};
-
-/*
- * REVISIT define __raw_readll/__raw_writell here, but move them to
- * <asm/io.h> at some point
- */
-#define __raw_writell(v, a) (__chk_io_ptr(a), \
- *(volatile u64 __force *)(a) = (v))
-#define __raw_readll(a) (__chk_io_ptr(a), \
- *(volatile u64 __force *)(a))
-
-#endif
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 78a6a11d821..9b1c9531029 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -18,7 +18,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 2f5dc54cd4c..51ba2b81a10 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -19,7 +19,6 @@
#include <linux/i2c.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 399130fac0b..0a56b9444f1 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,8 +19,8 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -53,12 +53,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED 0
-
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@@ -83,55 +77,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
-#ifdef CONFIG_LEDS
-
/*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
****************************************************************************/
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
- int val;
-
- if (evt == led_idle_end)
- val = 1;
- else if (evt == led_idle_start)
- val = 0;
- else
- return;
-
- gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
- int pin;
-
- if (machine_is_rd88f5182()) {
- pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED 0
- if (gpio_request(pin, "DBGLED") == 0) {
- if (gpio_direction_output(pin, 0) != 0) {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to set output pin %d\n", pin);
- gpio_free(pin);
- return 0;
- }
- } else {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to request gpio %d\n", pin);
- return 0;
- }
-
- leds_event = rd88f5182_dbgled_event;
- }
-
- return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+ {
+ .name = "rd88f5182:cpu",
+ .default_trigger = "cpu0",
+ .gpio = RD88F5182_GPIO_LED,
+ },
+};
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+ .leds = rd88f5182_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f5182_gpio_led_data,
+ },
+};
/*****************************************************************************
* PCI
@@ -298,6 +269,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
+ platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 92df49c1b62..ed50910b08a 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -20,7 +20,6 @@
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2bedc9ed076..ee88d6eae64 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -98,12 +98,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 6ff466bd43e..ae1e9977603 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -191,6 +191,87 @@ static void __init idp_map_io(void)
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct idp_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} idp_leds[] = {
+ { "idp:green", "heartbeat", },
+ { "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+ u32 reg = IDP_CPLD_LED_CONTROL;
+
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+
+ IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+
+ return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_pxa_idp())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+ struct idp_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = idp_leds[i].name;
+ led->cdev.brightness_set = idp_led_set;
+ led->cdev.brightness_get = idp_led_get;
+ led->cdev.default_trigger = idp_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = IDP_HB_LED;
+ else
+ led->mask = IDP_BUSY_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
+#endif
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b060025d1..00000000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= IDP_HB_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= IDP_BUSY_LED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_HB_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_HB_LED;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_BUSY_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
- else
- IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c884a7..00000000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision. Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
- else
- LUB_DISC_BLNK_LED |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab340fe..00000000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author: Nicolas Pitre
- * Created: Nov 05, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
- else
- MST_LEDCTRL |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6afa..00000000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
- if (machine_is_lubbock())
- leds_event = lubbock_leds_event;
- if (machine_is_mainstone())
- leds_event = mainstone_leds_event;
- if (machine_is_pxa_idp())
- leds_event = idp_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01345..00000000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 0ca0db78790..3c48035afd6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/major.h>
@@ -23,6 +24,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -549,6 +552,98 @@ static void __init lubbock_map_io(void)
PCFR |= PCFR_OPDE;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct lubbock_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} lubbock_leds[] = {
+ { "lubbock:D28", "default-on", },
+ { "lubbock:D27", "cpu0", },
+ { "lubbock:D26", "heartbeat" },
+ { "lubbock:D25", },
+ { "lubbock:D24", },
+ { "lubbock:D23", },
+ { "lubbock:D22", },
+ { "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_lubbock())
+ return -ENODEV;
+
+ /* All ON */
+ LUB_DISC_BLNK_LED |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+ struct lubbock_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = lubbock_leds[i].name;
+ led->cdev.brightness_set = lubbock_led_set;
+ led->cdev.brightness_get = lubbock_led_get;
+ led->cdev.default_trigger = lubbock_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+#endif
+
MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 1aebaf71946..bdc6c335830 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -613,6 +615,98 @@ static void __init mainstone_map_io(void)
PCFR = 0x66;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct mainstone_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} mainstone_leds[] = {
+ { "mainstone:D28", "default-on", },
+ { "mainstone:D27", "cpu0", },
+ { "mainstone:D26", "heartbeat" },
+ { "mainstone:D25", },
+ { "mainstone:D24", },
+ { "mainstone:D23", },
+ { "mainstone:D22", },
+ { "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
+ /* All ON */
+ MST_LEDCTRL |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+ struct mainstone_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = mainstone_leds[i].name;
+ led->cdev.brightness_set = mainstone_led_set;
+ led->cdev.brightness_get = mainstone_led_get;
+ led->cdev.default_trigger = mainstone_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+#endif
+
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.atag_offset = 0x100, /* BLOB boot parameter setting */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index ff007d15e0e..68246748058 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -34,7 +34,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
@@ -330,44 +329,6 @@ struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove_dma,
};
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
- u32 led = 1 << smp_processor_id();
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~led;
- break;
-
- case led_idle_end:
- val = val | led;
- break;
-
- case led_timer:
- val = val ^ REALVIEW_SYS_LED7;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/*
* Where is the timer (VA)?
*/
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index f8f2c0ac4c0..f2141ae5a7d 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <asm/setup.h>
-#include <asm/leds.h>
#define APB_DEVICE(name, busid, base, plat) \
static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
@@ -47,7 +46,6 @@ extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
extern void __iomem *timer3_va_base;
-extern void realview_leds_event(led_event_t ledevt);
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index ce7747692c8..d3b3cd216d6 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -463,10 +462,6 @@ static void __init realview_eb_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e21711d72ee..07d6672ddae 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -33,7 +33,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -376,10 +375,6 @@ static void __init realview_pb1176_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b442fb276d5..ec4fcd9a7e9 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -358,10 +357,6 @@ static void __init realview_pb11mp_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 1435cd86396..9992431b8a1 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -30,7 +30,6 @@
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
@@ -300,10 +299,6 @@ static void __init realview_pba8_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 5d2c8bebb06..17954a327e1 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,7 +29,6 @@
#include <linux/platform_data/clk-realview.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/pgtable.h>
@@ -395,10 +394,6 @@ static void __init realview_pbx_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 60b97ec0167..1aed9e70465 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
-led-y := leds.o
obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
-led-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BADGE4) += badge4.o
-led-$(CONFIG_SA1100_BADGE4) += leds-badge4.o
obj-$(CONFIG_SA1100_CERF) += cerf.o
-led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_COLLIE) += collie.o
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o
obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
-led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o
obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
-led-$(CONFIG_SA1100_LART) += leds-lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON) += shannon.o
obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
# Miscellaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_SA1100_SSP) += ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d673211f121..1710ed1a0ac 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
#include <video/sa1100fb.h>
@@ -529,6 +531,89 @@ static void __init assabet_map_io(void)
sa1100_register_uart(2, 3);
}
+/* LEDs */
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct assabet_led {
+ struct led_classdev cdev;
+ u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} assabet_leds[] = {
+ { "assabet:red", "cpu0",},
+ { "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ if (b != LED_OFF)
+ ASSABET_BCR_clear(led->mask);
+ else
+ ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_assabet())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+ struct assabet_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = assabet_leds[i].name;
+ led->cdev.brightness_set = assabet_led_set;
+ led->cdev.brightness_get = assabet_led_get;
+ led->cdev.default_trigger = assabet_leds[i].trigger;
+
+ if (!i)
+ led->mask = ASSABET_BCR_LED_RED;
+ else
+ led->mask = ASSABET_BCR_LED_GREEN;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
+#endif
MACHINE_START(ASSABET, "Intel-Assabet")
.atag_offset = 0x100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b30fb99b587..038df4894b0 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -76,8 +78,36 @@ static struct platform_device sa1111_device = {
.resource = sa1111_resources,
};
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+ {
+ .name = "badge4:red",
+ .default_trigger = "heartbeat",
+ .gpio = 7,
+ },
+ {
+ .name = "badge4:green",
+ .default_trigger = "cpu0",
+ .gpio = 9,
+ },
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+ .leds = badge4_gpio_leds,
+ .num_leds = ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &badge4_gpio_led_info,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
+ &badge4_leds,
};
static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 09d7f4b4b35..5240f104a3c 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -43,8 +45,48 @@ static struct platform_device cerfuart2_device = {
.resource = cerfuart2_resources,
};
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+ {
+ .name = "cerf:d0",
+ .default_trigger = "heartbeat",
+ .gpio = 0,
+ },
+ {
+ .name = "cerf:d1",
+ .default_trigger = "cpu0",
+ .gpio = 1,
+ },
+ {
+ .name = "cerf:d2",
+ .default_trigger = "default-on",
+ .gpio = 2,
+ },
+ {
+ .name = "cerf:d3",
+ .default_trigger = "default-on",
+ .gpio = 3,
+ },
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+ .leds = cerf_gpio_leds,
+ .num_leds = ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cerf_gpio_led_info,
+ }
+};
+
+
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
+ &cerf_leds,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 7f86bd91182..fc106aab7c7 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
#include <linux/serial_core.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -183,9 +187,37 @@ static struct flash_platform_data hackkit_flash_data = {
static struct resource hackkit_flash_resource =
DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+ {
+ .name = "hackkit:red",
+ .default_trigger = "cpu0",
+ .gpio = 22,
+ },
+ {
+ .name = "hackkit:green",
+ .default_trigger = "heartbeat",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+ .leds = hackkit_gpio_leds,
+ .num_leds = ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &hackkit_gpio_led_info,
+ }
+};
+
static void __init hackkit_init(void)
{
sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+ platform_device_register(&hackkit_leds);
}
/**********************************************************************
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index b775a0abec0..b2ce04bf4c9 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <video/sa1100fb.h>
@@ -126,6 +129,27 @@ static struct map_desc lart_io_desc[] __initdata = {
}
};
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+ {
+ .name = "lart:red",
+ .default_trigger = "cpu0",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+ .leds = lart_gpio_leds,
+ .num_leds = ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lart_gpio_led_info,
+ }
+};
static void __init lart_map_io(void)
{
sa1100_map_io();
@@ -139,6 +163,8 @@ static void __init lart_map_io(void)
GPDR |= GPIO_UART_TXD;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
+
+ platform_device_register(&lart_leds);
}
MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 3699176bca9..00000000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK (ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= ASSABET_BCR_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_GREEN;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index f99fac3eedb..00000000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED GPIO_GPIO(7)
-#define LED_GREEN GPIO_GPIO(9)
-#define LED_MASK (LED_RED|LED_GREEN)
-
-#define LED_IDLE LED_GREEN
-#define LED_TIMER LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_TIMER;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* LED off when system is idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_IDLE;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_IDLE;
- break;
-#endif
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 30fc3b2bf55..00000000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0 GPIO_GPIO(0)
-#define LED_D1 GPIO_GPIO(1)
-#define LED_D2 GPIO_GPIO(2)
-#define LED_D3 GPIO_GPIO(3)
-#define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_D0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-#endif
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D2;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D2;
- break;
-
- case led_amber_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D3;
- break;
-
- case led_amber_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D3;
- break;
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index f8e47235bab..00000000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN GPIO_GPIO23
-#define LED_RED GPIO_GPIO22
-#define LED_MASK (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 22/23 are outputs */
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 50a5b143b46..00000000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- * - GPIO23 is the LED, on if system is not idle
- * You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- * time, but in that case the timer events will still dictate the
- * pace of the LED.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23 GPIO_GPIO23
-#define LED_MASK (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 23 is output pin */
- GPDR |= LED_23;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_23;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_23;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_23;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_23;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_23;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0f105..00000000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
- if (machine_is_assabet())
- leds_event = assabet_leds_event;
- if (machine_is_consus())
- leds_event = consus_leds_event;
- if (machine_is_badge4())
- leds_event = badge4_leds_event;
- if (machine_is_brutus())
- leds_event = brutus_leds_event;
- if (machine_is_cerf())
- leds_event = cerf_leds_event;
- if (machine_is_flexanet())
- leds_event = flexanet_leds_event;
- if (machine_is_graphicsclient())
- leds_event = graphicsclient_leds_event;
- if (machine_is_hackkit())
- leds_event = hackkit_leds_event;
- if (machine_is_lart())
- leds_event = lart_leds_event;
- if (machine_is_pfs168())
- leds_event = pfs168_leds_event;
- if (machine_is_graphicsmaster())
- leds_event = graphicsmaster_leds_event;
- if (machine_is_adsbitsy())
- leds_event = adsbitsy_leds_event;
- if (machine_is_pt_system3())
- leds_event = system3_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b6020f55..00000000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b04e7b..29657183c45 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o dma.o irq.o pci.o
+obj-y := core.o dma.o irq.o pci.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index d35b94ef73b..9ad2e9737fb 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/param.h>
#include <asm/system_misc.h>
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 25609076921..081c778a10a 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,165 +1,117 @@
/*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
* DIGITAL Shark LED control routines.
*
- * The leds use is as follows:
- * - Green front - toggles state every 50 timer interrupts
- * - Amber front - Unused, this is a dual color led (Amber/Green)
- * - Amber back - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
*
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <asm/leds.h>
+#include <asm/mach-types.h>
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
+#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
+struct shark_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} shark_leds[] = {
+ { "shark:amber0", "default-on", }, /* Bit 5 */
+ { "shark:green", "heartbeat", }, /* Bit 6 */
+ { "shark:amber1", "cpu0" }, /* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+ outw(0x09, 0x24);
+ return inw(0x26);
+}
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+ outw(0x09, 0x24);
+ outw(value, 0x26);
+}
-static DEFINE_RAW_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
-short sequoia_read(int addr) {
- outw(addr,0x24);
- return inw(0x26);
-}
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
-void sequoia_write(short value,short addr) {
- outw(addr,0x24);
- outw(value,0x26);
+ led_reg_write(reg);
}
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&leds_lock, flags);
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
- hw_led_state = sequoia_read(0x09);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- switch (evt) {
- case led_start:
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
- hw_led_state |= SEQUOIA_LED_BACK;
-#else
- hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- saved_state = hw_led_state;
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = saved_state;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= SEQUOIA_LED_GREEN;
- break;
-#endif
+static int __init shark_leds_init(void)
+{
+ int i;
+ u16 reg;
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
+ if (!machine_is_shark())
+ return -ENODEV;
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-#endif
+ for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+ struct shark_led *led;
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- default:
- break;
- }
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
- if (led_state & LED_STATE_ENABLED)
- sequoia_write(hw_led_state,0x09);
+ led->cdev.name = shark_leds[i].name;
+ led->cdev.brightness_set = shark_led_set;
+ led->cdev.brightness_get = shark_led_get;
+ led->cdev.default_trigger = shark_leds[i].trigger;
- raw_spin_unlock_irqrestore(&leds_lock, flags);
-}
+ /* Count in 5 bits offset */
+ led->mask = BIT(i + 5);
-static int __init leds_init(void)
-{
- extern void (*leds_event)(led_event_t);
- short temp;
-
- leds_event = sequoia_leds_event;
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
/* Make LEDs independent of power-state */
- request_region(0x24,4,"sequoia");
- temp = sequoia_read(0x09);
- temp |= 1<<10;
- sequoia_write(temp,0x09);
- leds_event(led_start);
+ request_region(0x24, 4, "led_reg");
+ reg = led_reg_read();
+ reg |= 1 << 10;
+ led_reg_write(reg);
+
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
+#endif
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index c8a7b951f75..cc9b5fd8c3d 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -917,14 +917,10 @@ PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX
PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71);
PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 92000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* scales with voltage */
-PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(dvc, "tegra-i2c.3", NULL, 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
-PERIPH_CLK(i2c1_i2c, "tegra-i2c.0", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(i2c2_i2c, "tegra-i2c.1", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(i2c3_i2c, "tegra-i2c.2", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
-PERIPH_CLK(dvc_i2c, "tegra-i2c.3", "i2c", 0, 0, 72000000, mux_pllp_out3, 0);
+PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
+PERIPH_CLK(dvc, "tegra-i2c.3", "div-clk", 47, 0x128, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U16);
PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 600000000, mux_pllp_pllc_pllm_clkm, MUX);
@@ -989,10 +985,6 @@ static struct clk *tegra_list_clks[] = {
&tegra_i2c2,
&tegra_i2c3,
&tegra_dvc,
- &tegra_i2c1_i2c,
- &tegra_i2c2_i2c,
- &tegra_i2c3_i2c,
- &tegra_dvc_i2c,
&tegra_uarta,
&tegra_uartb,
&tegra_uartc,
@@ -1056,6 +1048,10 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("vde", "tegra-aes", "vde"),
CLK_DUPLICATE("cclk", NULL, "cpu"),
CLK_DUPLICATE("twd", "smp_twd", NULL),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
};
#define CLK(dev, con, ck) \
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index c10449603df..d92cb556ae3 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1071,11 +1071,11 @@ PERIPH_CLK(la, "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX
PERIPH_CLK(owr, "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB);
PERIPH_CLK(nor, "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71); /* requires min voltage */
PERIPH_CLK(mipi, "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB); /* scales with voltage */
-PERIPH_CLK(i2c1, "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c2, "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c3, "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c4, "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
-PERIPH_CLK(i2c5, "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c1, "tegra-i2c.0", "div-clk", 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c2, "tegra-i2c.1", "div-clk", 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c3, "tegra-i2c.2", "div-clk", 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c4, "tegra-i2c.3", "div-clk", 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
+PERIPH_CLK(i2c5, "tegra-i2c.4", "div-clk", 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB);
PERIPH_CLK(uarta, "tegra-uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
PERIPH_CLK(uartb, "tegra-uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
PERIPH_CLK(uartc, "tegra-uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB);
@@ -1287,6 +1287,11 @@ struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("dam1", NULL, "dam1"),
CLK_DUPLICATE("dam2", NULL, "dam2"),
CLK_DUPLICATE("spdif_in", NULL, "spdif_in"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.0", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+ CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"),
};
struct clk *tegra_ptr_clks[] = {
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index ca7902c6ed1..5b5c1eeb5b5 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -37,7 +37,6 @@
#include <linux/mtd/physmap.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/hardware/vic.h>
@@ -758,10 +757,6 @@ void __init versatile_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = versatile_leds_event;
-#endif
}
/*
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index d15a4a6d614..ca83a7659ae 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -42,9 +42,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
- bool
+ def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
- default y if LEDS_CLASS
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 195aaae6587..ea29bbe8e5c 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,280 +1,119 @@
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
+
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t lock;
-static struct h2p2_dbg_fpga __iomem *fpga;
-static u16 led_state, hw_led_state;
-
-
-#ifdef CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api() 1
-#else
-#define new_led_api() 0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
*/
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
+static struct h2p2_dbg_fpga __iomem *fpga;
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
-static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
-#endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
-
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
-
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+ const char *name;
+ const char *trigger;
+} dbg_leds[] = {
+ { "dbg:d4", "heartbeat", },
+ { "dbg:d5", "cpu0", },
+ { "dbg:d6", "default-on", },
+ { "dbg:d7", },
+ { "dbg:d8", },
+ { "dbg:d9", },
+ { "dbg:d10", },
+ { "dbg:d11", },
+ { "dbg:d12", },
+ { "dbg:d13", },
+ { "dbg:d14", },
+ { "dbg:d15", },
+ { "dbg:d16", },
+ { "dbg:d17", },
+ { "dbg:d18", },
+ { "dbg:d19", },
};
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
+ reg = __raw_readw(&fpga->leds);
+ if (b != LED_OFF)
+ reg |= led->mask;
else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
+ reg &= ~led->mask;
+ __raw_writew(reg, &fpga->leds);
}
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
- unsigned i;
- struct dbg_led *led;
- int status;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
+ reg = __raw_readw(&fpga->leds);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
-
- spin_lock_init(&lock);
+ int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+ struct dbg_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
-#ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
-#endif
+ led->cdev.name = dbg_leds[i].name;
+ led->cdev.brightness_set = dbg_led_set;
+ led->cdev.brightness_get = dbg_led_get;
+ led->cdev.default_trigger = dbg_leds[i].trigger;
+ led->mask = BIT(i);
- if (new_led_api()) {
- newled_init(&pdev->dev);
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
}
return 0;
@@ -282,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
- __raw_writew(~0, &fpga->leds);
+ fpga_led_state = __raw_readw(&fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
- __raw_writew(~hw_led_state, &fpga->leds);
+ __raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 4dcb11c3d89..60552e22f22 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -28,7 +28,6 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 8d5c10a5084..2a4ae8a6a08 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -16,8 +16,10 @@ config PLAT_VERSATILE_FPGA_IRQ_NR
depends on PLAT_VERSATILE_FPGA_IRQ
config PLAT_VERSATILE_LEDS
- def_bool y if LEDS_CLASS
+ def_bool y if NEW_LEDS
depends on ARCH_REALVIEW || ARCH_VERSATILE
+ select LEDS_CLASS
+ select LEDS_TRIGGER
config PLAT_VERSATILE_SCHED_CLOCK
def_bool y
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa555ea..d2490d00b46 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
} versatile_leds[] = {
{ "versatile:0", "heartbeat", },
{ "versatile:1", "mmc0", },
- { "versatile:2", },
- { "versatile:3", },
- { "versatile:4", },
- { "versatile:5", },
+ { "versatile:2", "cpu0" },
+ { "versatile:3", "cpu1" },
+ { "versatile:4", "cpu2" },
+ { "versatile:5", "cpu3" },
{ "versatile:6", },
{ "versatile:7", },
};