Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is our first set of fixes from arm-soc for 3.11.
   - A handful of build and warning fixes from Arnd
   - A collection of OMAP fixes
   - defconfig updates to make the default configs more useful for real
     use (and testing) out of the box on hardware

  And a couple of other small fixes.  Some of these have been recently
  applied but it's normally how we deal with fixes, with less bake time
  in -next needed"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  arm: multi_v7_defconfig: Tweaks for omap and sunxi
  arm: multi_v7_defconfig: add i.MX options and NFS root
  ARM: omap2: add select of TI_PRIV_EDMA
  ARM: exynos: select PM_GENERIC_DOMAINS only when used
  ARM: ixp4xx: avoid circular header dependency
  ARM: OMAP: omap_common_late_init may be unused
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: build mach-omap code only if needed
  ARM: zynq: use DT_MACHINE_START
  ARM: omap5: omap5 has SCU and TWD
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ...

26 files changed, 309 insertions, 160 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5b7be8d975b..e401a766c0b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -510,6 +510,16 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart1 port on SiRFmarco devices.
 
+	config DEBUG_STI_UART
+		depends on ARCH_STI
+		bool "Use StiH415/416 ASC for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on StiH415/416 based platforms like B2000, B2020.
+		  It support UART2 and SBC_UART1.
+
+		  If unsure, say N.
+
 	config DEBUG_U300_UART
 		bool "Kernel low-level debugging messages via U300 UART0"
 		depends on ARCH_U300
@@ -564,16 +574,6 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
-	config DEBUG_STI_UART
-		depends on ARCH_STI
-		bool "Use StiH415/416 ASC for low-level debug"
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on StiH415/416 based platforms like B2000, B2020.
-		  It support UART2 and SBC_UART1.
-
-		  If unsure, say N.
-
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index ab177b406b7..365760b33a2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -828,6 +828,7 @@
 			regulator-name = "vdd_vbus_wup1";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
+			enable-active-high;
 			gpio = <&gpio 24 0>; /* PD0 */
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 17015991045..ed4b901b022 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -410,6 +410,7 @@
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
+			enable-active-high;
 			gpio = <&gpio 170 0>; /* PV2 */
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index ea078ab8ede..ab67c94db28 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -586,6 +586,7 @@
 			regulator-name = "vbus1";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
+			enable-active-high;
 			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
 		};
 
@@ -595,6 +596,7 @@
 			regulator-name = "vbus3";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
+			enable-active-high;
 			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
 		};
 	};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 340d550c12b..fe0bdc361d2 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,88 +1,167 @@
-CONFIG_EXPERIMENTAL=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
-CONFIG_ARCH_SIRF=y
 CONFIG_MACH_ARMADA_XP=y
+CONFIG_ARCH_BCM=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX53=y
+CONFIG_SOC_IMX6Q=y
+CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_VF610=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_OMAP5=y
+CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
+CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_WM8850=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-CONFIG_ARCH_ZYNQ=y
-CONFIG_ARM_ERRATA_754322=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
+CONFIG_ARCH_STI=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SIRF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_TEGRA_PCI=y
+CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_ARCH_U8500=y
+CONFIG_MACH_SNOWBALL=y
+CONFIG_MACH_UX500_DT=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VIRT=y
+CONFIG_ARCH_WM8850=y
+CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
-CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
-CONFIG_SERIO_AMBAKMI=y
 CONFIG_MDIO_SUN4I=y
+CONFIG_KEYBOARD_SPEAR=y
+CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
-CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_SIRFSOC=y
 CONFIG_SERIAL_SIRFSOC_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_IPMI_HANDLER=y
-CONFIG_IPMI_SI=y
-CONFIG_I2C=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
+CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
-CONFIG_GPIO_PL061=y
-CONFIG_FB=y
+CONFIG_SPI_TEGRA114=y
+CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_TPS51632=y
+CONFIG_REGULATOR_TPS62360=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_VEXPRESS=y
+CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
+CONFIG_DRM_TEGRA=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FB_SIMPLE=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_AB8500_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_MXS_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
-CONFIG_MMC_WMT=y
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_VT8500=y
-CONFIG_PWM=y
-CONFIG_PWM_VT8500=y
+CONFIG_RTC_DRV_TEGRA=y
 CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_SIRF_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_STE_DMA40=y
+CONFIG_SIRF_DMA=y
+CONFIG_TI_EDMA=y
+CONFIG_PL330_DMA=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_PWM=y
+CONFIG_PWM_VT8500=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a24c0244392..5339e6a4d63 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -22,6 +22,10 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_AM33XX=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
@@ -34,6 +38,8 @@ CONFIG_NR_CPUS=2
 CONFIG_LEDS=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
@@ -152,6 +158,13 @@ CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_LM75=m
 CONFIG_WATCHDOG=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
 CONFIG_MFD_TPS65217=y
@@ -238,7 +251,13 @@ CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
 CONFIG_RTC_DRV_OMAP=y
 CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index c037aa1065b..a0025dc1302 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,6 +1,8 @@
-CONFIG_EXPERIMENTAL=y
+CONFIG_HIGHMEM=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
@@ -9,10 +11,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_U5500=y
 CONFIG_MACH_UX500_DT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
@@ -20,6 +19,7 @@ CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
@@ -36,7 +36,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
@@ -60,35 +59,39 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_AB8500_BM is not set
-# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
-CONFIG_AB5500_CORE=y
-CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AB8500=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_GADGET=y
+CONFIG_REGULATOR_AB8500=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_UX500=y
+CONFIG_SND_SOC_UX500_MACH_MOP500=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_UX500=y
+CONFIG_USB_PHY=y
 CONFIG_AB8500_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
-CONFIG_LEDS_LP5521=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LP5521=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
@@ -108,7 +111,6 @@ CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
@@ -122,3 +124,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_DEV_UX500=y
+CONFIG_CRYPTO_DEV_UX500_CRYP=y
+CONFIG_CRYPTO_DEV_UX500_HASH=y
+CONFIG_CRYPTO_DEV_UX500_DEBUG=y
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
index 18d16937361..0393fbab8dd 100644
--- a/arch/arm/include/asm/smp_scu.h
+++ b/arch/arm/include/asm/smp_scu.h
@@ -23,10 +23,21 @@ static inline unsigned long scu_a9_get_base(void)
 	return pa;
 }
 
+#ifdef CONFIG_HAVE_ARM_SCU
 unsigned int scu_get_core_count(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+#else
+static inline unsigned int scu_get_core_count(void __iomem *scu_base)
+{
+	return 0;
+}
+static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+	return -EINVAL;
+}
+#endif
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)
 void scu_enable(void __iomem *scu_base);
 #else
 static inline void scu_enable(void __iomem *scu_base) {}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index f5f65b58181..855d4a7b462 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -38,7 +38,7 @@ config CPU_EXYNOS4210
 	depends on ARCH_EXYNOS4
 	select ARM_CPU_SUSPEND if PM
 	select PINCTRL_EXYNOS
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 686ef34c69f..63de1b3fd06 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -28,6 +28,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
index c9e930f2933..0396d89f947 100644
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -3,7 +3,7 @@
  * 
  */
 
-#include <mach/hardware.h>
+#include <mach/ixp4xx-regs.h>
 
 /*
  * We use IXP425 General purpose timer for our timer needs, it runs at 
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 46a89f5e826..75ef03dc996 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -27,6 +27,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include <mach/hardware.h>
+
 static struct resource omixp_flash_resources[] = {
 	{
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c7b32a966f6..627fa7e41fb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,63 +1,10 @@
 config ARCH_OMAP
 	bool
 
-config ARCH_OMAP2PLUS
-	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_BANDGAP
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
-	select OMAP_DM_TIMER
-	select PINCTRL
-	select PROC_DEVICETREE if PROC_FS
-	select SOC_BUS
-	select SPARSE_IRQ
-	select TI_PRIV_EDMA
-	select USE_OF
-	help
-	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
-
-
-if ARCH_OMAP2PLUS
-
-menu "TI OMAP2/3/4 Specific Features"
-
-config ARCH_OMAP2PLUS_TYPICAL
-	bool "Typical OMAP configuration"
-	default y
-	select AEABI
-	select HIGHMEM
-	select I2C
-	select I2C_OMAP
-	select MENELAUS if ARCH_OMAP2
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-	select PM_RUNTIME
-	select REGULATOR
-	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
-	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select VFP
-	help
-	  Compile a kernel suitable for booting most boards
-
-config SOC_HAS_OMAP2_SDRC
-	bool "OMAP2 SDRAM Controller support"
-
-config SOC_HAS_REALTIME_COUNTER
-	bool "Real time free running counter"
-	depends on SOC_OMAP5
-	default y
-
 config ARCH_OMAP2
 	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V6
-	default y
+	select ARCH_OMAP2PLUS
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
@@ -65,9 +12,8 @@ config ARCH_OMAP2
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
-	default y
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
@@ -81,9 +27,8 @@ config ARCH_OMAP3
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
-	default y
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
@@ -108,12 +53,87 @@ config ARCH_OMAP4
 config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
+	select ARM_ERRATA_798181
+
+config SOC_AM33XX
+	bool "AM33XX support"
+	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
+	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
+	select MULTI_IRQ_HANDLER
+	select COMMON_CLK
+
+config SOC_AM43XX
+	bool "TI AM43x"
+	depends on ARCH_MULTI_V7
+	select CPU_V7
+	select ARCH_OMAP2PLUS
+	select MULTI_IRQ_HANDLER
+	select ARM_GIC
+	select COMMON_CLK
+	select MACH_OMAP_GENERIC
+
+config ARCH_OMAP2PLUS
+	bool
+	select ARCH_HAS_BANDGAP
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select HAVE_CLK
+	select OMAP_DM_TIMER
+	select PINCTRL
+	select PROC_DEVICETREE if PROC_FS
+	select SOC_BUS
+	select SPARSE_IRQ
+	select TI_PRIV_EDMA
+	select USE_OF
+	help
+	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+
+
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select HIGHMEM
+	select I2C
+	select I2C_OMAP
+	select MENELAUS if ARCH_OMAP2
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select PM_RUNTIME
+	select REGULATOR
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	select VFP
+	help
+	  Compile a kernel suitable for booting most boards
+
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
+config SOC_HAS_REALTIME_COUNTER
+	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -142,23 +162,6 @@ config SOC_TI81XX
 	depends on ARCH_OMAP3
 	default y
 
-config SOC_AM33XX
-	bool "AM33XX support"
-	depends on ARCH_MULTI_V7
-	default y
-	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
-
-config SOC_AM43XX
-	bool "TI AM43x"
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select ARM_GIC
-	select COMMON_CLK
-	select MACH_OMAP_GENERIC
-
 config OMAP_PACKAGE_ZAF
        bool
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ea5a27ff994..d4f671547c3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -95,10 +95,6 @@ obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
-ifeq ($(CONFIG_PM_VERBOSE),y)
-CFLAGS_pm_bus.o				+= -DDEBUG
-endif
-
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index b54562d1235..87e65dde8e1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -553,6 +553,37 @@ static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* Display Sub System */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
+	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
 	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bd74f9f6063..bdd1e3a179e 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -61,7 +61,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
 
 static int __init rx51_video_init(void)
 {
-	if (!machine_is_nokia_rx51())
+	if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
 		return 0;
 
 	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index aef96e45cb2..3c1279f27d1 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -15,7 +15,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
@@ -66,7 +65,7 @@ static int __init omap3_l3_init(void)
 
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap3_l3_init);
 
@@ -100,7 +99,7 @@ static int __init omap4_l3_init(void)
 
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap4_l3_init);
 
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 190ae493c6e..2ca33cc0c48 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -83,10 +83,7 @@ static int __init omap_init_vrfb(void)
 	pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
 			res, num_res, NULL, 0);
 
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-	else
-		return 0;
+	return PTR_RET(pdev);
 }
 
 omap_arch_initcall(omap_init_vrfb);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 1c7969e965d..f3fdd6afa21 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1734,7 +1734,7 @@ static int __init omap_gpmc_init(void)
 	pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
 	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
 
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
+	return PTR_RET(pdev);
 }
 omap_postcore_initcall(omap_gpmc_init);
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index fe3253a100e..4a3f06f0285 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -394,7 +394,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
-static void __init omap_common_late_init(void)
+static void __init __maybe_unused omap_common_late_init(void)
 {
 	omap_mux_late_init();
 	omap2_common_pm_late_init();
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 9ace8eae7ee..33c8846b419 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -54,10 +54,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
 	WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
 	     dev_name);
 
-	if (IS_ERR(omap_pmu_dev))
-		return PTR_ERR(omap_pmu_dev);
-
-	return 0;
+	return PTR_RET(omap_pmu_dev);
 }
 
 static int __init omap_init_pmu(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 88ff83a0942..9086ce03ae1 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -34,6 +34,8 @@ ppa_zero_params:
 ppa_por_params:
 	.word		1, 0
 
+#ifdef CONFIG_ARCH_OMAP4
+
 /*
  * =============================
  * == CPU suspend finisher ==
@@ -326,7 +328,9 @@ skip_l2en:
 
 	b	cpu_resume			@ Jump to generic resume
 ENDPROC(omap4_cpu_resume)
-#endif
+#endif	/* CONFIG_ARCH_OMAP4 */
+
+#endif	/* defined(CONFIG_SMP) && defined(CONFIG_PM) */
 
 #ifndef CONFIG_OMAP4_ERRATA_I688
 ENTRY(omap_bus_sync)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 29ac667b7a8..b37e1fcbad5 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -220,7 +220,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 					 int posted)
 {
 	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
-	const char *oh_name;
+	const char *oh_name = NULL;
 	struct device_node *np;
 	struct omap_hwmod *oh;
 	struct resource irq, mem;
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 899a86c31ec..1ccddd22811 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -287,14 +287,14 @@ static struct gpio_em_config gio3_config = {
 static struct resource gio3_resources[] = {
 	[0] = {
 		.name	= "GIO_096",
-		.start	= 0xe0050100,
-		.end	= 0xe005012b,
+		.start	= 0xe0050180,
+		.end	= 0xe00501ab,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.name	= "GIO_096",
-		.start	= 0xe0050140,
-		.end	= 0xe005015f,
+		.start	= 0xe00501c0,
+		.end	= 0xe00501df,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index c5a75a7a508..7f45c2edbca 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -62,7 +62,7 @@ enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
 static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
-	SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
 	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
 	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
 	SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 4130e65a0e3..5b799c29886 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -101,7 +101,7 @@ static const char * const zynq_dt_match[] = {
 	NULL
 };
 
-MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
+DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
 	.init_machine	= zynq_init_machine,