ARM: i.MX28: dts: rename usbphy pin names

The pins have nothing todo with the phy layer. We better rename them, so
it gets clear they are routed to the ehci core not to any phy.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

8 files changed, 11 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 6729872ffe9..e5beaa58bb4 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 093fd7b69a4..7d51459de5e 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -298,7 +298,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 1ebd44edaf8..c4e00ce4b6d 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index a4f0acb9343..7c9cc783f0d 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d6e71ed3147..15f3b39716e 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -180,7 +180,7 @@
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			disable-over-current;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e6d0fa69973..8536b0db901 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -248,14 +248,14 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_a>;
+			pinctrl-0 = <&usb0_pins_a>;
 			status = "okay";
 		};
 
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 2612a01e8da..0ce3cb8e791 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_b>;
+			pinctrl-0 = <&usb0_pins_b>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index df783c2648a..f7deccd60ea 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -783,7 +783,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_a: usbphy0@0 {
+				usb0_pins_a: usb0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -793,7 +793,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_b: usbphy0@1 {
+				usb0_pins_b: usb0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -803,7 +803,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy1_pins_a: usbphy1@0 {
+				usb1_pins_a: usb1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT