diff options
| author | Christer Weinigel <christer@weinigel.se> | 2008-07-07 18:12:46 +0100 |
|---|---|---|
| committer | Ben Dooks <ben-linux@fluff.org> | 2008-07-07 18:13:04 +0100 |
| commit | e43f238390168a13416d4f21803f76b1ff45fb95 (patch) | |
| tree | 54e010041b9b610f2bcc08d0f16074fd2afb9f16 /arch | |
| parent | 9579087331ee0cd220d29aa5bda79ff55b33c228 (diff) | |
[ARM] Acer n30: LCD support.
This patch adds the configuration needed for the LCD display on the n30.
Signed-off-by: Christer Weinigel <christer@weinigel.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-n30.c | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 621b343adbe..476b15c089a 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -31,8 +31,10 @@ #include <asm/irq.h> #include <asm/mach-types.h> +#include <asm/arch/fb.h> #include <asm/arch/leds-gpio.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> @@ -290,6 +292,31 @@ static struct platform_device n30_warning_led = { }, }; +static struct s3c2410fb_display n30_display __initdata = { + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + .pixclock = 170000, + .xres = 240, + .yres = 320, + .bpp = 16, + .left_margin = 3, + .right_margin = 40, + .hsync_len = 40, + .upper_margin = 2, + .lower_margin = 3, + .vsync_len = 2, + + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME, +}; + +static struct s3c2410fb_mach_info n30_fb_info __initdata = { + .displays = &n30_display, + .num_displays = 1, + .default_display = 0, + .lpcsel= 0x06, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -334,6 +361,7 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { + s3c24xx_fb_set_platdata(&n30_fb_info); s3c_device_i2c.dev.platform_data = &n30_i2ccfg; s3c24xx_udc_set_platdata(&n30_udc_cfg); |