summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2012-07-21 23:22:35 +0200
committerArnd Bergmann <arnd@arndb.de>2012-07-21 23:22:35 +0200
commit2d05bf6ef7391ac3642ab62bc3a649fdb32731fe (patch)
treea8671f0eafa885b4f3ad05204e3ed642b6acab59 /arch
parent9c63cd5a955ce8a3de1776a9e4b6b89c69b2a09e (diff)
parent8c0383b8f6a8012b107cd62eaa5a556586d8ea56 (diff)
Merge branch 'samsung/defconfig' into next/defconfig
From Kukjin Kim <kgene.kim@samsung.com>: It is including new exynos_defconfig for DT configuration of exynos4 and exynos5 together. The old exynos4_defconfig will be used for non-DT for a while and we will try to move on using exynos_defconfig for only DT. * samsung/defconfig: ARM: exynos_defconfig: enable more platforms in defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/configs/exynos_defconfig92
-rw-r--r--arch/arm/configs/omap2plus_defconfig1
-rw-r--r--arch/arm/include/asm/atomic.h2
-rw-r--r--arch/arm/include/asm/domain.h18
-rw-r--r--arch/arm/include/asm/thread_info.h5
-rw-r--r--arch/arm/kernel/kprobes-test-arm.c4
-rw-r--r--arch/arm/kernel/perf_event.c2
-rw-r--r--arch/arm/kernel/ptrace.c3
-rw-r--r--arch/arm/kernel/signal.c46
-rw-r--r--arch/arm/kernel/signal.h2
-rw-r--r--arch/arm/kernel/traps.c2
-rw-r--r--arch/arm/kernel/vmlinux.lds.S2
-rw-r--r--arch/arm/mach-dove/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-dove/include/mach/dove.h1
-rw-r--r--arch/arm/mach-exynos/pm_domains.c13
-rw-r--r--arch/arm/mach-imx/clk-imx35.c9
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c2
-rw-r--r--arch/arm/mach-mmp/include/mach/gpio-pxa.h29
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/bridge-regs.h1
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/mv78xx0.h2
-rw-r--r--arch/arm/mach-mxs/mach-apx4devkit.c11
-rw-r--r--arch/arm/mach-omap2/board-overo.c2
-rw-r--r--arch/arm/mach-omap2/clockdomain.h4
-rw-r--r--arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c1
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c32
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c28
-rw-r--r--arch/arm/mach-omap2/twl-common.c2
-rw-r--r--arch/arm/mach-pxa/hx4700.c15
-rw-r--r--arch/arm/mach-s3c24xx/clock-s3c2440.c2
-rw-r--r--arch/arm/mach-shmobile/platsmp.c5
-rw-r--r--arch/arm/mach-ux500/board-mop500.c12
-rw-r--r--arch/arm/mach-ux500/timer.c2
-rw-r--r--arch/arm/mach-versatile/pci.c1
-rw-r--r--arch/arm/mm/mm.h2
-rw-r--r--arch/arm/mm/mmu.c74
-rw-r--r--arch/arm/plat-samsung/adc.c8
-rw-r--r--arch/arm/plat-samsung/devs.c3
-rw-r--r--arch/arm/plat-samsung/s5p-clock.c1
-rw-r--r--arch/h8300/include/asm/pgtable.h3
-rw-r--r--arch/h8300/include/asm/uaccess.h3
-rw-r--r--arch/h8300/kernel/signal.c2
-rw-r--r--arch/h8300/kernel/time.c1
-rw-r--r--arch/mips/pci/pci-lantiq.c4
-rw-r--r--arch/mn10300/include/asm/ptrace.h3
-rw-r--r--arch/mn10300/include/asm/thread_info.h2
-rw-r--r--arch/mn10300/include/asm/timex.h11
-rw-r--r--arch/mn10300/kernel/cevt-mn10300.c10
-rw-r--r--arch/mn10300/kernel/internal.h2
-rw-r--r--arch/mn10300/kernel/irq.c4
-rw-r--r--arch/mn10300/kernel/traps.c1
-rw-r--r--arch/mn10300/mm/dma-alloc.c1
-rw-r--r--arch/mn10300/unit-asb2303/include/unit/timex.h4
-rw-r--r--arch/mn10300/unit-asb2303/smc91111.c1
-rw-r--r--arch/mn10300/unit-asb2305/include/unit/timex.h4
-rw-r--r--arch/mn10300/unit-asb2305/unit-init.c1
-rw-r--r--arch/mn10300/unit-asb2364/include/unit/timex.h4
-rw-r--r--arch/powerpc/include/asm/hw_irq.h6
-rw-r--r--arch/powerpc/kernel/irq.c48
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S2
-rw-r--r--arch/powerpc/kvm/book3s_pr_papr.c1
-rw-r--r--arch/powerpc/mm/numa.c2
-rw-r--r--arch/powerpc/platforms/cell/pervasive.c11
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c17
-rw-r--r--arch/powerpc/xmon/xmon.c2
-rw-r--r--arch/sh/include/asm/io_noioport.h17
-rw-r--r--arch/sh/kernel/cpu/sh3/serial-sh7720.c2
-rw-r--r--arch/tile/kernel/backtrace.c9
-rw-r--r--arch/um/drivers/mconsole_kern.c1
-rw-r--r--arch/x86/kernel/vsyscall_64.c39
-rw-r--r--arch/x86/kvm/mmu.c3
-rw-r--r--arch/xtensa/kernel/process.c2
72 files changed, 505 insertions, 162 deletions
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
new file mode 100644
index 00000000000..e40b435d204
--- /dev/null
+++ b/arch/arm/configs/exynos_defconfig
@@ -0,0 +1,92 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C24XX_PWM=y
+CONFIG_ARCH_EXYNOS5=y
+CONFIG_MACH_EXYNOS4_DT=y
+CONFIG_MACH_EXYNOS5_DT=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_RFKILL_REGULATOR=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TPS65090=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_FB=y
+CONFIG_EXYNOS_VIDEO=y
+CONFIG_EXYNOS_MIPI_DSI=y
+CONFIG_EXYNOS_DP=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_7x14=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9854ff4279e..11828e63253 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 68374ba6a94..c79f61faa3a 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -243,7 +243,7 @@ typedef struct {
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 3d2220498ab..6ddbe446425 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -60,13 +60,13 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
@@ -78,8 +78,8 @@
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b79f8e97f77..af7b0bda335 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
@@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index ba32b393b3f..38c1a3b103a 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void)
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 186c8cb982c..a02eada3aa5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event)
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 5700a7ae7f0..14e38261cd3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,7 +25,6 @@
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
@@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index fd2392a17ac..536c5d6b340 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -27,6 +27,7 @@
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
@@ -47,6 +48,18 @@ const unsigned long sigreturn_codes[7] = {
};
/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
+/*
* atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
@@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
@@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall)
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 5ff067b7c75..6fcfe8398aa 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,5 +8,7 @@
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4928d89758f..3647170e9a1 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base)
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 43a31fb0631..36ff15bbfdd 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@ SECTIONS
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949dc4ac..f953bb54aa9 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d488c..d52b0ef313b 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index e9fafcf163d..373c3c00d24 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
- if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+ if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+ pm_genpd_dev_need_restore(&pdev->dev, true);
+ else
pr_info("%s: error in adding %s device to %s power"
"domain\n", __func__, dev_name(&pdev->dev),
pd->name);
@@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void)
if (of_have_populated_dt())
return exynos_pm_dt_parse_domains();
- for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
- pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
- exynos4_pm_domains[idx]->is_off);
+ for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+ struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+ int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+ pm_genpd_init(&pd->pd, NULL, !on);
+ }
#ifdef CONFIG_S5P_DEV_FIMD0
exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 920a8cc4272..c6422fb10ba 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@ int __init mx35_clocks_init()
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,6 +263,14 @@ int __init mx35_clocks_init()
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f76edb96a48..ba09552fe5f 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a599f3..00000000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb96dba..eb187e0e059 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497162e..e807c4c52a0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9dcdef..f5f061757de 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy)
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
@@ -225,6 +235,7 @@ static void __init apx4devkit_init(void)
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3a4c3..779734d8ba3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@ static void __init overo_init(void)
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index f7b58609bad..6227e9505c2 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -31,12 +31,16 @@
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 839145e1cfb..4972219653c 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index c5342584749..7f2133abe7d 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 773193670ea..2d710f50fca 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
@@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
@@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f30e861ce6d..b7bcba5221b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1928,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1963,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1998,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2033,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = {
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3864,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
@@ -3922,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
@@ -4013,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -4031,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -5857,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = {
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
@@ -6014,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -6029,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
@@ -6136,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a910f3..43a97907533 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a746b..d3de84b0dcb 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
@@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
@@ -872,14 +880,19 @@ static struct gpio global_gpios[] = {
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index 414364eb426..cb2883d553b 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = {
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
+ .ctrlbit = S3C2440_CLKCON_AC97,
};
static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index e859fcdb3d5..fde0d23121d 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -22,8 +22,13 @@
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
#ifdef CONFIG_ARCH_EMEV2
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 1509a3cb583..4fd93f5c49e 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
@@ -769,6 +764,11 @@ MACHINE_END
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 741e71feca7..66e7f00884a 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -63,8 +63,10 @@ static void __init ux500_timer_init(void)
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index bec933b04ef..e95bf84cc83 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -339,7 +339,6 @@ void __init pci_versatile_preinit(void)
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c471436c795..2e8a1efdf7b 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -64,7 +64,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
#ifdef CONFIG_ZONE_DMA
extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e5dad60b558..cf4528d5177 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -791,6 +791,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
@@ -1072,6 +1145,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 33ecd0c9f0c..b1e05ccff3a 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client,
return -EINVAL;
}
- if (client->is_ts && adc->ts_pend)
- return -EAGAIN;
-
spin_lock_irqsave(&adc->lock, flags);
+ if (client->is_ts && adc->ts_pend) {
+ spin_unlock_irqrestore(&adc->lock, flags);
+ return -EAGAIN;
+ }
+
client->channel = channel;
client->nr_samples = nr_samples;
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 1d214cb9d77..6303974c2ee 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = {
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_camif_resource[] = {
[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_CAM),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
};
struct platform_device s3c_device_camif = {
diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c
index 031a61899be..48a15991103 100644
--- a/arch/arm/plat-samsung/s5p-clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = {
struct clk clk_xusbxti = {
.name = "xusbxti",
.id = -1,
+ .rate = 24000000,
};
struct clk s5p_clk_27m = {
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
index a09230a08e0..62ef17676b4 100644
--- a/arch/h8300/include/asm/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
@@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long);
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
index 356068cd087..8725d1ad427 100644
--- a/arch/h8300/include/asm/uaccess.h
+++ b/arch/h8300/include/asm/uaccess.h
@@ -100,7 +100,6 @@ extern int __put_user_bad(void);
break; \
default: \
__gu_err = __get_user_bad(); \
- __gu_val = 0; \
break; \
} \
(x) = __gu_val; \
@@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n)
return 0;
}
+#define __clear_user clear_user
+
#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index fca10378701..5adaadaf921 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index 32263a138aa..e0f74191d55 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -27,6 +27,7 @@
#include <linux/profile.h>
#include <asm/io.h>
+#include <asm/irq_regs.h>
#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index ea453532a33..075d87acd12 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 55b79ef1002..44251b974f1 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -81,9 +81,6 @@ struct pt_regs {
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 08251d6f6b1..ac519bbd42f 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void)
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
index bd4e90dfe6c..f8e66425cbf 100644
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@@ -11,7 +11,6 @@
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
-#include <asm/hardirq.h>
#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
@@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void)
extern int init_clockevents(void);
extern int init_clocksource(void);
-static inline void setup_jiffies_interrupt(int irq,
- struct irqaction *action)
-{
- u16 tmp;
- setup_irq(irq, action);
- set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
- GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- tmp = GxICR(irq);
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */
diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c
index 69cae026078..ccce35e3e17 100644
--- a/arch/mn10300/kernel/cevt-mn10300.c
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@@ -70,6 +70,16 @@ static void event_handler(struct clock_event_device *dev)
{
}
+static inline void setup_jiffies_interrupt(int irq,
+ struct irqaction *action)
+{
+ u16 tmp;
+ setup_irq(irq, action);
+ set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+ GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ tmp = GxICR(irq);
+}
+
int __init init_clockevents(void)
{
struct clock_event_device *cd;
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
index a5ac755dd69..2df440105a8 100644
--- a/arch/mn10300/kernel/internal.h
+++ b/arch/mn10300/kernel/internal.h
@@ -9,6 +9,8 @@
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/irqreturn.h>
+
struct clocksource;
struct clock_event_device;
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 2381df83bd0..35932a8de8b 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -170,9 +170,9 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 94a9c6d53e1..b900e5afa0a 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -26,6 +26,7 @@
#include <linux/kdebug.h>
#include <linux/bug.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index 159acb02cfd..e244ebe637e 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -15,6 +15,7 @@
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h
index cc18fe7d8b9..c37f9832cf1 100644
--- a/arch/mn10300/unit-asb2303/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2303/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c
index 43c24643941..53677694b16 100644
--- a/arch/mn10300/unit-asb2303/smc91111.c
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
index 758af30d1a1..4cefc224f44 100644
--- a/arch/mn10300/unit-asb2305/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index e1becd6b757..bc4adfaf815 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h
index ddb7ed01070..42f32db7508 100644
--- a/arch/mn10300/unit-asb2364/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2364/include/unit/timex.h
@@ -11,10 +11,6 @@
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 6eb75b80488..0554ab062bd 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void)
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
@@ -125,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1b415027ec0..1f017bb7a7c 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en)
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
@@ -286,6 +286,52 @@ void notrace restore_interrupts(void)
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafce2a1..a1044f43bec 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c
index 3ff9013d6e7..ee02b30878e 100644
--- a/arch/powerpc/kvm/book3s_pr_papr.c
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@@ -241,6 +241,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd)
case H_PUT_TCE:
return kvmppc_h_pr_put_tce(vcpu);
case H_CEDE:
+ vcpu->arch.shared->msr |= MSR_EE;
kvm_vcpu_block(vcpu);
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
vcpu->stat.halt_wakeup++;
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6e8f677f564..1e95556dc69 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -639,7 +639,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index efdacc82957..d17e98bc0c1 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -42,11 +42,9 @@ static void cbe_power_save(void)
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
@@ -81,6 +79,9 @@ static void cbe_power_save(void)
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index e61483e8e96..c71be66bd5d 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -99,15 +99,18 @@ out:
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (!lazy_irq_pending())
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0f3ab06d222..eab3492a45c 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -971,7 +971,7 @@ static int cpu_cmd(void)
/* print cpus waiting or in xmon */
printf("cpus stopped:");
count = 0;
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h
index e136d28d1d2..4d48f1436a6 100644
--- a/arch/sh/include/asm/io_noioport.h
+++ b/arch/sh/include/asm/io_noioport.h
@@ -19,9 +19,20 @@ static inline u32 inl(unsigned long addr)
return -1;
}
-#define outb(x, y) BUG()
-#define outw(x, y) BUG()
-#define outl(x, y) BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+ BUG();
+}
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
index 8832c526cdf..c4a0336660d 100644
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
@@ -2,7 +2,7 @@
#include <linux/serial_core.h>
#include <linux/io.h>
#include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
{
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
index 9092ce8aa6b..f8b74ca83b9 100644
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
@@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location,
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 88e466b159d..43b39d61b53 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -705,7 +705,6 @@ static void stack_proc(void *arg)
struct task_struct *from = current, *to = arg;
to->thread.saved_task = from;
- rcu_switch_from(from);
switch_to(from, to, from);
}
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 7515cf0e180..5db36caf428 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -139,6 +139,19 @@ static int addr_to_vsyscall_nr(unsigned long addr)
return nr;
}
+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+ if (!seccomp_mode(&tsk->seccomp))
+ return 0;
+ task_pt_regs(tsk)->orig_ax = syscall_nr;
+ task_pt_regs(tsk)->ax = syscall_nr;
+ return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
@@ -174,6 +187,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
int vsyscall_nr;
int prev_sig_on_uaccess_error;
long ret;
+ int skip;
/*
* No point in checking CS -- the only way to get here is a user mode
@@ -205,9 +219,6 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
}
tsk = current;
- if (seccomp_mode(&tsk->seccomp))
- do_exit(SIGKILL);
-
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
@@ -222,8 +233,13 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
* address 0".
*/
ret = -EFAULT;
+ skip = 0;
switch (vsyscall_nr) {
case 0:
+ skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
!write_ok_or_segv(regs->si, sizeof(struct timezone)))
break;
@@ -234,6 +250,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
break;
case 1:
+ skip = vsyscall_seccomp(tsk, __NR_time);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(time_t)))
break;
@@ -241,6 +261,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
break;
case 2:
+ skip = vsyscall_seccomp(tsk, __NR_getcpu);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
!write_ok_or_segv(regs->si, sizeof(unsigned)))
break;
@@ -253,6 +277,12 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+ if (skip) {
+ if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+ goto do_ret;
+ goto done; /* seccomp trace/trap */
+ }
+
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
@@ -271,10 +301,11 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
regs->ax = ret;
+do_ret:
/* Emulate a ret instruction. */
regs->ip = caller;
regs->sp += 8;
-
+done:
return true;
sigsegv:
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index be3cea4407f..57e168e27b5 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3934,6 +3934,9 @@ static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm,
{
struct kvm_mmu_page *page;
+ if (list_empty(&kvm->arch.active_mmu_pages))
+ return;
+
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 9b306e550e3..2c8d6a3d250 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -277,7 +277,7 @@ void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs)
/* Don't leak any random bits. */
- memset(elfregs, 0, sizeof (elfregs));
+ memset(elfregs, 0, sizeof(*elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.