summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-07-02 15:04:12 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-07-02 15:04:12 -0700
commita8c4c20dfa8b28a3c99e33c639d9c2ea5657741e (patch)
tree887b64d29b5a46d9ab2ca1267d8a2f05b5845561 /arch
parent168d04b3b4de7723eb73b3cffc9cb75224e0f393 (diff)
parent2dc7667b9d0674db6572723356fe3857031101a4 (diff)
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig12
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/compressed/head.S7
-rw-r--r--arch/arm/configs/at91rm9200dk_defconfig1
-rw-r--r--arch/arm/configs/at91rm9200ek_defconfig1
-rw-r--r--arch/arm/configs/ateb9200_defconfig1
-rw-r--r--arch/arm/configs/carmeva_defconfig1
-rw-r--r--arch/arm/configs/csb337_defconfig1
-rw-r--r--arch/arm/configs/csb637_defconfig1
-rw-r--r--arch/arm/configs/kafa_defconfig1
-rw-r--r--arch/arm/configs/kb9202_defconfig1
-rw-r--r--arch/arm/configs/omap_h2_1610_defconfig129
-rw-r--r--arch/arm/configs/onearm_defconfig1
-rw-r--r--arch/arm/configs/trizeps4_defconfig1579
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/asm-offsets.c3
-rw-r--r--arch/arm/kernel/entry-armv.S4
-rw-r--r--arch/arm/kernel/head.S5
-rw-r--r--arch/arm/kernel/iwmmxt-notifier.c64
-rw-r--r--arch/arm/kernel/iwmmxt.S27
-rw-r--r--arch/arm/kernel/process.c6
-rw-r--r--arch/arm/kernel/setup.c4
-rw-r--r--arch/arm/mach-at91rm9200/Kconfig82
-rw-r--r--arch/arm/mach-at91rm9200/Makefile13
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200.c (renamed from arch/arm/mach-at91rm9200/common.c)2
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200_time.c (renamed from arch/arm/mach-at91rm9200/time.c)2
-rw-r--r--arch/arm/mach-ep93xx/Kconfig12
-rw-r--r--arch/arm/mach-ep93xx/Makefile2
-rw-r--r--arch/arm/mach-ep93xx/edb9302.c62
-rw-r--r--arch/arm/mach-ep93xx/edb9315a.c62
-rw-r--r--arch/arm/mach-iop3xx/Kconfig15
-rw-r--r--arch/arm/mach-omap1/Kconfig7
-rw-r--r--arch/arm/mach-omap1/Makefile1
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c7
-rw-r--r--arch/arm/mach-omap1/board-fsample.c319
-rw-r--r--arch/arm/mach-omap1/board-innovator.c75
-rw-r--r--arch/arm/mach-omap1/board-osk.c147
-rw-r--r--arch/arm/mach-omap1/clock.c18
-rw-r--r--arch/arm/mach-omap1/pm.c7
-rw-r--r--arch/arm/mach-omap1/time.c2
-rw-r--r--arch/arm/mach-omap2/Kconfig1
-rw-r--r--arch/arm/mach-omap2/Makefile5
-rw-r--r--arch/arm/mach-omap2/clock.c37
-rw-r--r--arch/arm/mach-omap2/clock.h2
-rw-r--r--arch/arm/mach-omap2/devices.c46
-rw-r--r--arch/arm/mach-omap2/gpmc.c209
-rw-r--r--arch/arm/mach-omap2/io.c2
-rw-r--r--arch/arm/mach-omap2/mux.c38
-rw-r--r--arch/arm/mach-omap2/pm-domain.c300
-rw-r--r--arch/arm/mach-omap2/pm.c271
-rw-r--r--arch/arm/mach-omap2/timer-gp.c86
-rw-r--r--arch/arm/mach-pxa/Kconfig19
-rw-r--r--arch/arm/mach-pxa/Makefile2
-rw-r--r--arch/arm/mach-pxa/leds-trizeps4.c134
-rw-r--r--arch/arm/mach-pxa/leds.c2
-rw-r--r--arch/arm/mach-pxa/leds.h1
-rw-r--r--arch/arm/mach-pxa/lpd270.c126
-rw-r--r--arch/arm/mach-pxa/trizeps4.c471
-rw-r--r--arch/arm/mach-sa1100/cpu-sa1110.c131
-rw-r--r--arch/arm/mm/Kconfig4
-rw-r--r--arch/arm/mm/ioremap.c227
-rw-r--r--arch/arm/mm/mm-armv.c37
-rw-r--r--arch/arm/mm/proc-arm1020.S19
-rw-r--r--arch/arm/mm/proc-arm1020e.S39
-rw-r--r--arch/arm/mm/proc-arm1022.S39
-rw-r--r--arch/arm/mm/proc-arm1026.S39
-rw-r--r--arch/arm/mm/proc-arm6_7.S16
-rw-r--r--arch/arm/mm/proc-arm720.S23
-rw-r--r--arch/arm/mm/proc-arm920.S33
-rw-r--r--arch/arm/mm/proc-arm922.S33
-rw-r--r--arch/arm/mm/proc-arm925.S39
-rw-r--r--arch/arm/mm/proc-arm926.S36
-rw-r--r--arch/arm/mm/proc-macros.S10
-rw-r--r--arch/arm/mm/proc-sa110.S19
-rw-r--r--arch/arm/mm/proc-sa1100.S21
-rw-r--r--arch/arm/mm/proc-v6.S19
-rw-r--r--arch/arm/mm/proc-xsc3.S28
-rw-r--r--arch/arm/mm/proc-xscale.S63
-rw-r--r--arch/arm/plat-omap/Kconfig2
-rw-r--r--arch/arm/plat-omap/clock.c4
-rw-r--r--arch/arm/plat-omap/cpu-omap.c18
-rw-r--r--arch/arm/plat-omap/devices.c10
-rw-r--r--arch/arm/plat-omap/dma.c84
-rw-r--r--arch/arm/plat-omap/dmtimer.c428
-rw-r--r--arch/arm/plat-omap/gpio.c103
-rw-r--r--arch/arm/plat-omap/sram.c9
-rw-r--r--arch/arm/plat-omap/timer32k.c122
87 files changed, 5254 insertions, 841 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f123c7c9fc9..919d8b92aaa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -121,11 +121,11 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91RM9200
- bool "Atmel AT91RM9200"
+config ARCH_AT91
+ bool "Atmel AT91"
help
- Say Y here if you intend to run this kernel on an Atmel
- AT91RM9200-based board.
+ This enables support for systems based on the Atmel AT91RM9200
+ and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -547,7 +547,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200
+ ARCH_AT91RM9200 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -678,7 +678,7 @@ config XIP_PHYS_ADDR
endmenu
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
menu "CPU Frequency scaling"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a3bbaaf480b..3345c6d0fd1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -114,7 +114,7 @@ endif
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index f7b5c6db30f..14a9ff9c68d 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -447,8 +447,11 @@ __common_mmu_cache_on:
mov r1, #-1
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
- mcr p15, 0, r0, c1, c0, 0 @ load control register
- mov pc, lr
+ b 1f
+ .align 5 @ cache line aligned
+1: mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mrc p15, 0, r0, c1, c0, 0 @ and read it back to
+ sub pc, lr, r0, lsr #32 @ properly flush pipeline
/*
* All code following this line is relocatable. It is relocated by
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 9e1c1cceb73..4f3d8d37741 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 6e0805a971d..08b5dc38876 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 69c39e09874..bee7813d040 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index 5ccd29a7c1f..8a075c8ecc6 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 94bd9932a40..3594155a813 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 1519124c550..640d70c1f06 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 51ded20e3f6..1db633e2c94 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index fee4f566452..45396e08719 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -80,6 +80,7 @@ CONFIG_KMOD=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index ee3ecbd9002..05adb0b34e7 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,19 +1,20 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov 9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
#
# Block layer
#
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
#
CONFIG_PREEMPT=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
@@ -259,9 +269,12 @@ CONFIG_NET=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# TPM devices
#
+# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
@@ -580,10 +612,22 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
#
#
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
#
# Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
@@ -680,17 +734,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
@@ -698,20 +741,27 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_MMC is not set
#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 5401c01caef..2b4a63be03f 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
new file mode 100644
index 00000000000..a6698dc4f6b
--- /dev/null
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 7cffbaef064..f0c0cdb1c18 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
-obj-$(CONFIG_IWMMXT) += iwmmxt.o
+obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 447ede5143a..cc2d58d028e 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -105,6 +105,7 @@ int main(void)
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
- DEFINE(PROCINFO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mmu_flags));
+ DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+ DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
return 0;
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 26f197afd20..7ea5f01dfc7 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -589,9 +589,7 @@ ENTRY(__switch_to)
#ifdef CONFIG_MMU
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
-#if defined(CONFIG_IWMMXT)
- bl iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra
ldmib r4, {r4, r5}
mar acc0, r4, r5
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 518b80cd87d..2242f5f7cb7 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -220,7 +220,7 @@ __create_page_tables:
teq r0, r6
bne 1b
- ldr r7, [r10, #PROCINFO_MMUFLAGS] @ mmuflags
+ ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
@@ -271,8 +271,7 @@ __create_page_tables:
#endif
#ifdef CONFIG_DEBUG_LL
- bic r7, r7, #0x0c @ turn off cacheable
- @ and bufferable bits
+ ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
diff --git a/arch/arm/kernel/iwmmxt-notifier.c b/arch/arm/kernel/iwmmxt-notifier.c
new file mode 100644
index 00000000000..44a86c33796
--- /dev/null
+++ b/arch/arm/kernel/iwmmxt-notifier.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ * XScale iWMMXt (Concan) context switching and handling
+ *
+ * Initial code:
+ * Copyright (c) 2003, Intel Corporation
+ *
+ * Full lazy switching support, optimizations and more, by Nicolas Pitre
+ * Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+ struct thread_info *thread = t;
+
+ switch (cmd) {
+ case THREAD_NOTIFY_FLUSH:
+ /*
+ * flush_thread() zeroes thread->fpstate, so no need
+ * to do anything here.
+ *
+ * FALLTHROUGH: Ensure we don't try to overwrite our newly
+ * initialised state information on the first fault.
+ */
+
+ case THREAD_NOTIFY_RELEASE:
+ iwmmxt_task_release(thread);
+ break;
+
+ case THREAD_NOTIFY_SWITCH:
+ iwmmxt_task_switch(thread);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+ .notifier_call = iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+ thread_register_notifier(&iwmmxt_notifier_block);
+
+ return 0;
+}
+
+late_initcall(iwmmxt_init);
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index a3bae95e536..b63b528f22a 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
/*
* Concan handling on task switch
*
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
*
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
*/
ENTRY(iwmmxt_task_switch)
- mrc p15, 0, r4, c15, c1, 0
- tst r4, #0x3 @ CP0 and CP1 accessible?
+ mrc p15, 0, r1, c15, c1, 0
+ tst r1, #0x3 @ CP0 and CP1 accessible?
bne 1f @ yes: block them for next task
- ldr r5, =concan_owner
- add r6, r2, #TI_IWMMXT_STATE @ get next task Concan save area
- ldr r5, [r5] @ get current Concan owner
- teq r5, r6 @ next task owns it?
+ ldr r2, =concan_owner
+ add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area
+ ldr r2, [r2] @ get current Concan owner
+ teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
-1: eor r4, r4, #3 @ flip Concan access
- mcr p15, 0, r4, c15, c1, 0
+1: eor r1, r1, #3 @ flip Concan access
+ mcr p15, 0, r1, c15, c1, 0
- mrc p15, 0, r4, c2, c0, 0
- sub pc, lr, r4, lsr #32 @ cpwait and return
+ mrc p15, 0, r1, c2, c0, 0
+ sub pc, lr, r1, lsr #32 @ cpwait and return
/*
* Remove Concan ownership of given task
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3258b763c5..3079535afcc 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -352,9 +352,6 @@ void flush_thread(void)
memset(&thread->fpstate, 0, sizeof(union fp_state));
thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
void release_thread(struct task_struct *dead_task)
@@ -362,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
struct thread_info *thread = task_thread_info(dead_task);
thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
- iwmmxt_task_release(thread);
-#endif
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 7447a198732..7d6a516c0b9 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -344,9 +344,9 @@ static void __init setup_processor(void)
cpu_cache = *list->cache;
#endif
- printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+ printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
cpu_name, processor_id, (int)processor_id & 15,
- proc_arch[cpu_architecture()]);
+ proc_arch[cpu_architecture()], cr_alignment);
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 70d402f76ce..2f85e8693b1 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -1,6 +1,21 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
@@ -8,58 +23,87 @@ config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
- Select this if you are using Ajeco's 1ARM Single Board Computer
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-DK Development board
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
- bool "Cogent CSB337 board"
+ bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB337 board
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
- bool "Cogent CSB637 board"
+ bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
- Select this if you are using Cogent's CSB637 board
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
- bool "Conitec's ARM&EVA"
+ bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
- Select this if you are using Conitec's AT91RM9200-MCU-Module
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.htm>
-config MACH_KB9200
- bool "KwikByte's KB920x"
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
- Select this if you are using KwikByte's KB920x board
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
-config MACH_ATEB9200
- bool "Embest's ATEB9200"
+config MACH_KB9200
+ bool "KwikByte KB920x"
depends on ARCH_AT91RM9200
help
- Select this if you are using Embest's ATEB9200 board
+ Select this if you are using KwikByte's KB920x board.
+ <http://kwikbyte.com/KB9202_description_new.htm>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
- Select this if you are using Sperry-Sun's KAFA board
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
+# ----------------------------------------------------------
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile
index 82db957322d..c174805c24e 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91rm9200/Makefile
@@ -2,14 +2,19 @@
# Makefile for the linux kernel.
#
-obj-y := clock.o irq.o time.o gpio.o common.o devices.o
+obj-y := clock.o irq.o gpio.o devices.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_PM) += pm.o
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260) +=
+obj-$(CONFIG_ARCH_AT91SAM9261) +=
+
+# AT91RM9200 Board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
@@ -20,6 +25,10 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index cc55f4c28d9..7e1d072bdd8 100644
--- a/arch/arm/mach-at91rm9200/common.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/at91rm9200_time.c
index f2f080350cc..dc38e06ada6 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200_time.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index e15e4c54a25..f1b740083ae 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,12 +9,24 @@ config CRUNCH
comment "EP93xx Platforms"
+config MACH_EDB9302
+ bool "Support Cirrus Logic EDB9302"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9302 Evaluation Board.
+
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
+config MACH_EDB9315A
+ bool "Support Cirrus Logic EDB9315A"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9315A Evaluation Board.
+
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index dfa7e2e8a18..1f5a6b0487e 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,6 +6,8 @@ obj-m :=
obj-n :=
obj- :=
+obj-$(CONFIG_MACH_EDB9302) += edb9302.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
+obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
new file mode 100644
index 00000000000..62a8efd2325
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9302_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9302_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9302_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
new file mode 100644
index 00000000000..bfefdaa8f79
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+ .width = 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x60ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9315a_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9315a_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
index 2bfe8c729f9..4422f238860 100644
--- a/arch/arm/mach-iop3xx/Kconfig
+++ b/arch/arm/mach-iop3xx/Kconfig
@@ -30,12 +30,15 @@ config MACH_IQ80332
select ARCH_IOP331
help
Say Y here if you want to run your kernel on the Intel IQ80332
- evaluation kit for the IOP332 chipset
+ evaluation kit for the IOP332 chipset.
config ARCH_EP80219
- bool "Enable support for EP80219"
- select ARCH_IOP321
- select ARCH_IQ31244
+ bool "Enable support for EP80219"
+ select ARCH_IOP321
+ select ARCH_IQ31244
+ help
+ Say Y here if you want to run your kernel on the Intel EP80219
+ evaluation kit for the Intel 80219 chipset (a IOP321 variant).
# Which IOP variant are we running?
config ARCH_IOP321
@@ -56,8 +59,8 @@ config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
depends on (ARCH_IOP331)
help
- Say Y here if you have StepD of the IOP80331 or IOP8033
- based platforms.
+ Say Y here if you have StepD of the IOP80331 or IOP8033
+ based platforms.
endmenu
endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index f8d716ccc1d..d135568dc9e 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
+config MACH_OMAP_FSAMPLE
+ bool "TI F-Sample"
+ depends on ARCH_OMAP1 && ARCH_OMAP730
+ help
+ Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+ a board.
+
config MACH_VOICEBLUE
bool "Voiceblue"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ea719550ad..7165f74f78d 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 73df32aac4c..8437d065ada 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+ .register_host = 1,
+ .hmc_mode = 16,
+ .pins[0] = 2,
+};
+
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config },
+ { OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct platform_device ams_delta_led_device = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
new file mode 100644
index 00000000000..c753a3c5aad
--- /dev/null
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+#include <asm/arch/board-fsample.h>
+
+static int fsample_keymap[] = {
+ KEY(0,0,KEY_UP),
+ KEY(0,1,KEY_RIGHT),
+ KEY(0,2,KEY_LEFT),
+ KEY(0,3,KEY_DOWN),
+ KEY(0,4,KEY_CENTER),
+ KEY(0,5,KEY_0_5),
+ KEY(1,0,KEY_SOFT2),
+ KEY(1,1,KEY_SEND),
+ KEY(1,2,KEY_END),
+ KEY(1,3,KEY_VOLUMEDOWN),
+ KEY(1,4,KEY_VOLUMEUP),
+ KEY(1,5,KEY_RECORD),
+ KEY(2,0,KEY_SOFT1),
+ KEY(2,1,KEY_3),
+ KEY(2,2,KEY_6),
+ KEY(2,3,KEY_9),
+ KEY(2,4,KEY_SHARP),
+ KEY(2,5,KEY_2_5),
+ KEY(3,0,KEY_BACK),
+ KEY(3,1,KEY_2),
+ KEY(3,2,KEY_5),
+ KEY(3,3,KEY_8),
+ KEY(3,4,KEY_0),
+ KEY(3,5,KEY_HEADSETHOOK),
+ KEY(4,0,KEY_HOME),
+ KEY(4,1,KEY_1),
+ KEY(4,2,KEY_4),
+ KEY(4,3,KEY_7),
+ KEY(4,4,KEY_STAR),
+ KEY(4,5,KEY_POWER),
+ 0
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
+ .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_730_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mtd_partition nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ },
+};
+
+static struct flash_platform_data nor_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = nor_partitions,
+ .nr_parts = ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_data,
+ },
+ .num_resources = 1,
+ .resource = &nor_resource,
+};
+
+static struct nand_platform_data nand_data = {
+ .options = NAND_SAMSUNG_LP_OPTIONS,
+};
+
+static struct resource nand_resource = {
+ .start = OMAP_CS3_PHYS,
+ .end = OMAP_CS3_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+ .name = "omapnand",
+ .id = 0,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .num_resources = 1,
+ .resource = &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+ [0] = {
+ .start = INT_730_MPUIO_KEYPAD,
+ .end = INT_730_MPUIO_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct omap_kp_platform_data kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = fsample_keymap,
+};
+
+static struct platform_device kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &kp_data,
+ },
+ .num_resources = ARRAY_SIZE(kp_resources),
+ .resource = kp_resources,
+};
+
+static struct platform_device lcd_device = {
+ .name = "lcd_p2",
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &nor_device,
+ &nand_device,
+ &smc91x_device,
+ &kp_device,
+ &lcd_device,
+};
+
+#define P2_NAND_RB_GPIO_PIN 62
+
+static int nand_dev_ready(struct nand_platform_data *data)
+{
+ return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+}
+
+static struct omap_uart_config fsample_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config fsample_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel fsample_config[] = {
+ { OMAP_TAG_UART, &fsample_uart_config },
+ { OMAP_TAG_LCD, &fsample_lcd_config },
+};
+
+static void __init omap_fsample_init(void)
+{
+ if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
+ nand_data.dev_ready = nand_dev_ready;
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = fsample_config;
+ omap_board_config_size = ARRAY_SIZE(fsample_config);
+ omap_serial_init();
+}
+
+static void __init fsample_init_smc91x(void)
+{
+ fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+ fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+}
+
+void omap_fsample_init_irq(void)
+{
+ omap1_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+ fsample_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = FSAMPLE_CPLD_BASE,
+ .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
+ .length = FSAMPLE_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_fsample_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap_fsample_io_desc,
+ ARRAY_SIZE(omap_fsample_io_desc));
+
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+}
+
+MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = omap_fsample_map_io,
+ .init_irq = omap_fsample_init_irq,
+ .init_machine = omap_fsample_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e90c137a4cf..4cbc62db5b5 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,6 +37,8 @@
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
@@ -112,6 +114,42 @@ static struct platform_device innovator_flash_device = {
.resource = &innovator_flash_resource,
};
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+ .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ .spcr1 = RINTM(3) | RRST,
+ .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+ RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+ .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+ .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+ XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+ .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+ .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+ .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+ /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
+ .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+ .name = "OMAP Innovator AIC23",
+ .mcbsp_regs_alsa = &mcbsp_regs,
+ .codec_configure_dev = NULL, // aic23_configure,
+ .codec_set_samplerate = NULL, // aic23_set_samplerate,
+ .codec_clock_setup = NULL, // aic23_clock_setup,
+ .codec_clock_on = NULL, // aic23_clock_on,
+ .codec_clock_off = NULL, // aic23_clock_off,
+ .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device innovator_mcbsp1_device = {
+ .name = "omap_alsa_mcbsp",
+ .id = 1,
+ .dev = {
+ .platform_data = &alsa_config,
+ },
+};
+
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
@@ -139,6 +177,10 @@ static struct platform_device innovator_kp_device = {
#ifdef CONFIG_ARCH_OMAP15XX
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
{
@@ -174,13 +216,44 @@ static struct platform_device innovator1510_lcd_device = {
.id = -1,
};
+static struct platform_device innovator1510_spi_device = {
+ .name = "spi_inn1510",
+ .id = -1,
+};
+
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
+ &innovator_mcbsp1_device,
&innovator_kp_device,
&innovator1510_lcd_device,
+ &innovator1510_spi_device,
};
+static int innovator_get_pendown_state(void)
+{
+ return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+ /* FPGA (bus "10") CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &innovator1510_ts_info,
+ .irq = OMAP1510_INT_FPGA_TS,
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 10,
+ .chip_select = 0,
+} };
+
#endif /* CONFIG_ARCH_OMAP15XX */
#ifdef CONFIG_ARCH_OMAP16XX
@@ -311,6 +384,8 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+ spi_register_board_info(innovator1510_boardinfo,
+ ARRAY_SIZE(innovator1510_boardinfo));
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 1160093e8ef..e0711d23a6b 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,7 +33,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -45,25 +44,10 @@
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
-#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
-static int osk_keymap[] = {
- KEY(0, 0, KEY_F1),
- KEY(0, 3, KEY_UP),
- KEY(1, 1, KEY_LEFTCTRL),
- KEY(1, 2, KEY_LEFT),
- KEY(2, 0, KEY_SPACE),
- KEY(2, 1, KEY_ESC),
- KEY(2, 2, KEY_DOWN),
- KEY(3, 2, KEY_ENTER),
- KEY(3, 3, KEY_RIGHT),
- 0
-};
-
-
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@@ -181,48 +165,17 @@ static struct omap_alsa_codec_config alsa_config = {
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
- .id = 1,
+ .id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
-static struct resource osk5912_kp_resources[] = {
- [0] = {
- .start = INT_KEYBOARD,
- .end = INT_KEYBOARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = osk_keymap,
-};
-
-static struct platform_device osk5912_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &osk_kp_data,
- },
- .num_resources = ARRAY_SIZE(osk5912_kp_resources),
- .resource = osk5912_kp_resources,
-};
-
-static struct platform_device osk5912_lcd_device = {
- .name = "lcd_osk",
- .id = -1,
-};
-
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device,
&osk5912_smc91x_device,
&osk5912_cf_device,
&osk5912_mcbsp1_device,
- &osk5912_kp_device,
- &osk5912_lcd_device,
};
static void __init osk_init_smc91x(void)
@@ -276,18 +229,100 @@ static struct omap_uart_config osk_uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
+#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
};
+#endif
static struct omap_board_config_kernel osk_config[] = {
{ OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
+#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
+#endif
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/arch/keypad.h>
+
+static const int osk_keymap[] = {
+ /* KEY(col, row, code) */
+ KEY(0, 0, KEY_F1), /* SW4 */
+ KEY(0, 3, KEY_UP), /* (sw2/up) */
+ KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
+ KEY(1, 2, KEY_LEFT), /* (sw2/left) */
+ KEY(2, 0, KEY_SPACE), /* SW3 */
+ KEY(2, 1, KEY_ESC), /* SW6 */
+ KEY(2, 2, KEY_DOWN), /* (sw2/down) */
+ KEY(3, 2, KEY_ENTER), /* (sw2/select) */
+ KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
+ 0
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = (int *) osk_keymap,
+};
+
+static struct resource osk5912_kp_resources[] = {
+ [0] = {
+ .start = INT_KEYBOARD,
+ .end = INT_KEYBOARD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device osk5912_kp_device = {
+ .name = "omap-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &osk_kp_data,
+ },
+ .num_resources = ARRAY_SIZE(osk5912_kp_resources),
+ .resource = osk5912_kp_resources,
+};
+
+static struct platform_device osk5912_lcd_device = {
+ .name = "lcd_osk",
+ .id = -1,
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+ &osk5912_kp_device,
+ &osk5912_lcd_device,
+};
+
+static int mistral_get_pendown_state(void)
+{
+ return !omap_get_gpio_datain(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .get_pendown_state = mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+ /* MicroWire (bus 2) CS0 has an ads7846e */
+ .modalias = "ads7846",
+ .platform_data = &mistral_ts_info,
+ .irq = OMAP_GPIO_IRQ(4),
+ .max_speed_hz = 120000 /* max sample rate at 3V */
+ * 26 /* command + data + overhead */,
+ .bus_num = 2,
+ .chip_select = 0,
+} };
+
#ifdef CONFIG_PM
static irqreturn_t
osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
@@ -298,14 +333,18 @@ osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
static void __init osk_mistral_init(void)
{
- /* FIXME here's where to feed in framebuffer, touchpad, and
- * keyboard setup ... not in the drivers for those devices!
- *
- * NOTE: we could actually tell if there's a Mistral board
+ /* NOTE: we could actually tell if there's a Mistral board
* attached, e.g. by trying to read something from the ads7846.
- * But this is too early for that...
+ * But this arch_init() code is too early for that, since we
+ * can't talk to the ads or even the i2c eeprom.
*/
+ // omap_cfg_reg(P19_1610_GPIO6); // BUSY
+ omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
+ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+ spi_register_board_info(mistral_boardinfo,
+ ARRAY_SIZE(mistral_boardinfo));
+
/* the sideways button (SW1) is for use as a "wakeup" button */
omap_cfg_reg(N15_1610_MPUIO2);
if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
@@ -329,6 +368,8 @@ static void __init osk_mistral_init(void)
#endif
} else
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+ platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
}
#else
static void __init osk_mistral_init(void) { }
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 619db18144e..f1958e882e8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
/*
* linux/arch/arm/mach-omap1/clock.c
*
@@ -20,6 +21,7 @@
#include <asm/io.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/usb.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -270,8 +272,12 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
/*
* In most cases we should not need to reprogram DPLL.
* Reprogramming the DPLL is tricky, it must be done from SRAM.
+ * (on 730, bit 13 must always be 1)
*/
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+ if (cpu_is_omap730())
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
+ else
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
ck_dpll1.rate = ptr->pll_rate;
propagate_rate(&ck_dpll1);
@@ -748,7 +754,7 @@ int __init omap1_clk_init(void)
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
- omap_writew(0x1005, ARM_CKCTL);
+ omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
propagate_rate(&ck_dpll1);
}
@@ -761,13 +767,17 @@ int __init omap1_clk_init(void)
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
#endif
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
- omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+ /* (on 730, bit 13 must not be cleared) */
+ if (cpu_is_omap730())
+ omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+ else
+ omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
/* Put DSP/MPUI into reset until needed */
omap_writew(0, ARM_RSTCT1);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index ddf6b07dc9c..1b4e1d57afb 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
/*
* linux/arch/arm/mach-omap1/pm.c
*
@@ -50,6 +51,7 @@
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
@@ -326,8 +328,9 @@ void omap_pm_suspend(void)
/* stop DSP */
omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
- /* shut down dsp_ck */
- omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+ /* shut down dsp_ck */
+ if (!cpu_is_omap730())
+ omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
/* temporarily enabling api_ck to access DSP registers */
omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index c2d3205bc59..a01f0efdae1 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -93,7 +93,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
* will break. On P2, the timer count rate is 6.5 MHz after programming PTV
* with 0. This divides the 13MHz input by 2, and is undocumented.
*/
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* REVISIT: This ifdef construct should be replaced by a query to clock
* framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
*/
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 537dd2e6d38..aab97ccf1e6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,6 +8,7 @@ config ARCH_OMAP24XX
config ARCH_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP24XX
+ select OMAP_DM_TIMER
comment "OMAP Board Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 111eaa64258..266d88e77bd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,13 @@
#
# Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
+ serial.o gpmc.o
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7edf0f69da1..d1b648a4efb 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -659,26 +659,35 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
/* Isolate control register */
div_sel = (SRC_RATE_SEL_MASK & clk->flags);
- div_off = clk->src_offset;
+ div_off = clk->rate_offset;
validrate = omap2_clksel_round_rate(clk, rate, &new_div);
- if(validrate != rate)
+ if (validrate != rate)
return(ret);
field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
if (div_sel == 0)
return ret;
- if(clk->flags & CM_SYSCLKOUT_SEL1){
- switch(new_div){
- case 16: field_val = 4; break;
- case 8: field_val = 3; break;
- case 4: field_val = 2; break;
- case 2: field_val = 1; break;
- case 1: field_val = 0; break;
+ if (clk->flags & CM_SYSCLKOUT_SEL1) {
+ switch (new_div) {
+ case 16:
+ field_val = 4;
+ break;
+ case 8:
+ field_val = 3;
+ break;
+ case 4:
+ field_val = 2;
+ break;
+ case 2:
+ field_val = 1;
+ break;
+ case 1:
+ field_val = 0;
+ break;
}
- }
- else
+ } else
field_val = new_div;
reg = (void __iomem *)div_sel;
@@ -743,7 +752,7 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
val = 0x2;
break;
case CM_WKUP_SEL1:
- src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+ src_reg_addr = (u32)&CM_CLKSEL_WKUP;
mask = 0x3;
if (src_clk == &func_32k_ck)
val = 0x0;
@@ -783,9 +792,9 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
val = 0;
if (src_clk == &sys_ck)
val = 1;
- if (src_clk == &func_54m_ck)
- val = 2;
if (src_clk == &func_96m_ck)
+ val = 2;
+ if (src_clk == &func_54m_ck)
val = 3;
break;
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 6c78d471fab..2781dfbc516 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1062,7 +1062,7 @@ static struct clk gpt2_ick = {
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit4 */
- .enable_bit = 0,
+ .enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 4842ffe2670..aa4322451e8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -104,6 +104,51 @@ static inline void omap_init_sti(void)
static inline void omap_init_sti(void) {}
#endif
+#if defined(CONFIG_SPI_OMAP24XX)
+
+#include <asm/arch/mcspi.h>
+
+#define OMAP2_MCSPI1_BASE 0x48098000
+#define OMAP2_MCSPI2_BASE 0x4809a000
+
+/* FIXME: use resources instead */
+
+static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
+ .base = io_p2v(OMAP2_MCSPI1_BASE),
+ .num_cs = 4,
+};
+
+struct platform_device omap2_mcspi1 = {
+ .name = "omap2_mcspi",
+ .id = 1,
+ .dev = {
+ .platform_data = &omap2_mcspi1_config,
+ },
+};
+
+static struct omap2_mcspi_platform_config omap2_mcspi2_config = {
+ .base = io_p2v(OMAP2_MCSPI2_BASE),
+ .num_cs = 2,
+};
+
+struct platform_device omap2_mcspi2 = {
+ .name = "omap2_mcspi",
+ .id = 2,
+ .dev = {
+ .platform_data = &omap2_mcspi2_config,
+ },
+};
+
+static void omap_init_mcspi(void)
+{
+ platform_device_register(&omap2_mcspi1);
+ platform_device_register(&omap2_mcspi2);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -112,6 +157,7 @@ static int __init omap2_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
omap_init_i2c();
+ omap_init_mcspi();
omap_init_sti();
return 0;
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
new file mode 100644
index 00000000000..c7a48f921fe
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -0,0 +1,209 @@
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/gpmc.h>
+
+#undef DEBUG
+
+#define GPMC_BASE 0x6800a000
+#define GPMC_REVISION 0x00
+#define GPMC_SYSCONFIG 0x10
+#define GPMC_SYSSTATUS 0x14
+#define GPMC_IRQSTATUS 0x18
+#define GPMC_IRQENABLE 0x1c
+#define GPMC_TIMEOUT_CONTROL 0x40
+#define GPMC_ERR_ADDRESS 0x44
+#define GPMC_ERR_TYPE 0x48
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+#define GPMC_PREFETCH_CONFIG1 0x1e0
+#define GPMC_PREFETCH_CONFIG2 0x1e4
+#define GPMC_PREFETCH_CONTROL 0x1e8
+#define GPMC_PREFETCH_STATUS 0x1f0
+#define GPMC_ECC_CONFIG 0x1f4
+#define GPMC_ECC_CONTROL 0x1f8
+#define GPMC_ECC_SIZE_CONFIG 0x1fc
+
+#define GPMC_CS0 0x60
+#define GPMC_CS_SIZE 0x30
+
+static void __iomem *gpmc_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base =
+ (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+
+static struct clk *gpmc_l3_clk;
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+ __raw_writel(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+ return __raw_readl(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+ __raw_writel(val, reg_addr);
+}
+
+u32 gpmc_cs_read_reg(int cs, int idx)
+{
+ return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+ /* In picoseconds */
+ return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+}
+
+unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+ unsigned long tick_ps;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = gpmc_get_fclk_period();
+
+ return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+#ifdef DEBUG
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time, const char *name)
+#else
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time)
+#endif
+{
+ u32 l;
+ int ticks, mask, nr_bits;
+
+ if (time == 0)
+ ticks = 0;
+ else
+ ticks = gpmc_ns_to_ticks(time);
+ nr_bits = end_bit - st_bit + 1;
+ if (ticks >= 1 << nr_bits)
+ return -1;
+
+ mask = (1 << nr_bits) - 1;
+ l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
+ cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+ (l >> st_bit) & mask);
+#endif
+ l &= ~(mask << st_bit);
+ l |= ticks << st_bit;
+ gpmc_cs_write_reg(cs, reg, l);
+
+ return 0;
+}
+
+#ifdef DEBUG
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
+ t->field, #field) < 0) \
+ return -1
+#else
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
+ return -1
+#endif
+
+int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+{
+ int div;
+ u32 l;
+
+ l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+ div = l / gpmc_get_fclk_period();
+ if (div > 4)
+ return -1;
+ if (div < 0)
+ div = 1;
+
+ return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+ int div;
+ u32 l;
+
+ div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ if (div < 0)
+ return -1;
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
+ cs, gpmc_get_fclk_period(), div);
+#endif
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ l &= ~0x03;
+ l |= (div - 1);
+
+ return 0;
+}
+
+unsigned long gpmc_cs_get_base_addr(int cs)
+{
+ return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+}
+
+void __init gpmc_init(void)
+{
+ u32 l;
+
+ gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
+ BUG_ON(IS_ERR(gpmc_l3_clk));
+
+ l = gpmc_read_reg(GPMC_REVISION);
+ printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+ /* Set smart idle mode and automatic L3 clock gating */
+ l = gpmc_read_reg(GPMC_SYSCONFIG);
+ l &= 0x03 << 3;
+ l |= (0x02 << 3) | (1 << 0);
+ gpmc_write_reg(GPMC_SYSCONFIG, l);
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 20dd6e74e91..a0728c33e5d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -26,6 +26,7 @@
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
extern void omap2_check_revision(void);
+extern void gpmc_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -66,4 +67,5 @@ void __init omap2_init_common_hw(void)
{
omap2_mux_init();
omap2_clk_init();
+ gpmc_init();
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 4c5f2c04883..60ef084faff 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -52,6 +52,12 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
+/* 24xx GPMC wait pin monitoring */
+MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
+MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
+MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
+MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1)
+
/* 24xx McBSP */
MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
@@ -59,18 +65,38 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1)
MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
-MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
-MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
-MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
+MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
+MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
-MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
+MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
-MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
+MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+/* 242x DBG GPIO */
+MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
+MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1)
+MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1)
+MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1)
+MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1)
+MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1)
+MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1)
+MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1)
+MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1)
+MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1)
+
+/* 24xx external DMA requests */
+MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1)
+MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1)
+MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1)
+MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1)
+
/* TSC IRQ */
MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
new file mode 100644
index 00000000000..5e20e740cde
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-domain.c
@@ -0,0 +1,300 @@
+/*
+ * linux/arch/arm/mach-omap2/pm-domain.c
+ *
+ * Power domain functions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Some code based on earlier OMAP2 sample PM code
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "prcm-regs.h"
+
+/* Power domain offsets */
+#define PM_MPU_OFFSET 0x100
+#define PM_CORE_OFFSET 0x200
+#define PM_GFX_OFFSET 0x300
+#define PM_WKUP_OFFSET 0x400 /* Autoidle only */
+#define PM_PLL_OFFSET 0x500 /* Autoidle only */
+#define PM_DSP_OFFSET 0x800
+#define PM_MDM_OFFSET 0xc00
+
+/* Power domain wake-up dependency control register */
+#define PM_WKDEP_OFFSET 0xc8
+#define EN_MDM (1 << 5)
+#define EN_WKUP (1 << 4)
+#define EN_GFX (1 << 3)
+#define EN_DSP (1 << 2)
+#define EN_MPU (1 << 1)
+#define EN_CORE (1 << 0)
+
+/* Core power domain state transition control register */
+#define PM_PWSTCTRL_OFFSET 0xe0
+#define FORCESTATE (1 << 18) /* Only for DSP & GFX */
+#define MEM4RETSTATE (1 << 6)
+#define MEM3RETSTATE (1 << 5)
+#define MEM2RETSTATE (1 << 4)
+#define MEM1RETSTATE (1 << 3)
+#define LOGICRETSTATE (1 << 2) /* Logic is retained */
+#define POWERSTATE_OFF 0x3
+#define POWERSTATE_RETENTION 0x1
+#define POWERSTATE_ON 0x0
+
+/* Power domain state register */
+#define PM_PWSTST_OFFSET 0xe4
+
+/* Hardware supervised state transition control register */
+#define CM_CLKSTCTRL_OFFSET 0x48
+#define AUTOSTAT_MPU (1 << 0) /* MPU */
+#define AUTOSTAT_DSS (1 << 2) /* Core */
+#define AUTOSTAT_L4 (1 << 1) /* Core */
+#define AUTOSTAT_L3 (1 << 0) /* Core */
+#define AUTOSTAT_GFX (1 << 0) /* GFX */
+#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */
+#define AUTOSTAT_DSP (1 << 0) /* DSP */
+#define AUTOSTAT_MDM (1 << 0) /* MDM */
+
+/* Automatic control of interface clock idling */
+#define CM_AUTOIDLE1_OFFSET 0x30
+#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */
+#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */
+#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */
+#define AUTO_54M(x) (((x) & 0x3) << 6)
+#define AUTO_96M(x) (((x) & 0x3) << 2)
+#define AUTO_DPLL(x) (((x) & 0x3) << 0)
+#define AUTO_STOPPED 0x3
+#define AUTO_BYPASS_FAST 0x2 /* DPLL only */
+#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */
+#define AUTO_DISABLED 0x0
+
+/* Voltage control PRCM_VOLTCTRL bits */
+#define AUTO_EXTVOLT (1 << 15)
+#define FORCE_EXTVOLT (1 << 14)
+#define SETOFF_LEVEL(x) (((x) & 0x3) << 12)
+#define MEMRETCTRL (1 << 8)
+#define SETRET_LEVEL(x) (((x) & 0x3) << 6)
+#define VOLT_LEVEL(x) (((x) & 0x3) << 0)
+
+#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE)
+#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r))
+#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
+
+static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
+}
+
+static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
+}
+
+static u32 pmdomain_get_powerstate(int domain_offset)
+{
+ return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_powerstate(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autocontrol(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
+{
+ prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autoidle1(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle2(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle3(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle4(int domain_offset)
+{
+ return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
+}
+
+static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
+{
+ prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
+}
+
+/*
+ * Configures power management domains to idle clocks automatically.
+ */
+void pmdomain_set_autoidle(void)
+{
+ u32 val;
+
+ /* Set PLL auto stop for 54M, 96M & DPLL */
+ pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
+ AUTO_96M(AUTO_STOPPED) |
+ AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
+
+ /* External clock input control
+ * REVISIT: Should this be in clock framework?
+ */
+ PRCM_CLKSRC_CTRL |= (0x3 << 3);
+
+ /* Configure number of 32KHz clock cycles for sys_clk */
+ PRCM_CLKSSETUP = 0x00ff;
+
+ /* Configure automatic voltage transition */
+ PRCM_VOLTSETUP = 0;
+ val = PRCM_VOLTCTRL;
+ val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
+ val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
+ PRCM_VOLTCTRL = val;
+
+ /* Disable emulation tools functional clock */
+ PRCM_CLKEMUL_CTRL = 0x0;
+
+ /* Set core memory retention state */
+ val = pmdomain_get_powerstate(PM_CORE_OFFSET);
+ if (cpu_is_omap2420()) {
+ val &= ~(0x7 << 3);
+ val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
+ } else {
+ val &= ~(0xf << 3);
+ val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
+ MEM1RETSTATE);
+ }
+ pmdomain_set_powerstate(val, PM_CORE_OFFSET);
+
+ /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
+ val = SMS_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ SMS_SYSCONFIG |= val;
+
+ val = SDRC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3);
+ SDRC_SYSCONFIG = val;
+
+ /* Configure L3 interface for smart idle.
+ * REVISIT: Enable autoidle bit0 ?
+ */
+ val = GPMC_SYSCONFIG;
+ val &= ~(0x3 << 3);
+ val |= (0x2 << 3) | (1 << 0);
+ GPMC_SYSCONFIG = val;
+
+ pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
+ PM_MPU_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
+ if (!cpu_is_omap2420())
+ pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
+
+ /* Assume suspend function has saved the state for DSP and GFX */
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
+
+#if 0
+ /* REVISIT: Internal USB needs special handling */
+ force_standby_usb();
+ if (cpu_is_omap2430())
+ force_hsmmc();
+ sdram_self_refresh_on_idle_req(1);
+#endif
+
+ /* Enable clock auto control for all domains.
+ * Note that CORE domain includes also DSS, L4 & L3.
+ */
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
+ PM_CORE_OFFSET);
+ if (cpu_is_omap2420())
+ pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
+ PM_DSP_OFFSET);
+ else {
+ pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
+ pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
+ }
+
+ /* Enable clock autoidle for all domains */
+ pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
+ if (cpu_is_omap2420()) {
+ pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
+ } else {
+ pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
+ pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
+ }
+ pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
+ pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
+}
+
+/*
+ * Initializes power domains by removing wake-up dependencies and powering
+ * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
+ * must re-enable DSP and GFX when used.
+ */
+void __init pmdomain_init(void)
+{
+ /* Remove all domain wakeup dependencies */
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
+ pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
+ pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
+ if (cpu_is_omap2430())
+ pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
+
+ /* Power down DSP and GFX */
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
+ pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 562168fa2b1..d7eee99b7e3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,11 +37,18 @@
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
+#include "prcm-regs.h"
+
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
+extern void __init pmdomain_init(void);
+extern void pmdomain_set_autoidle(void);
+
+static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+
void omap2_pm_idle(void)
{
local_irq_disable();
@@ -87,23 +95,272 @@ static int omap2_pm_prepare(suspend_state_t state)
return error;
}
+#define INT0_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) | \
+ OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
+
+#define INT1_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
+
+#define INT2_WAKE_MASK (OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) | \
+ OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
+
+#define preg(reg) printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
+
+static void omap2_pm_debug(char * desc)
+{
+ printk("%s:\n", desc);
+
+ preg(CM_CLKSTCTRL_MPU);
+ preg(CM_CLKSTCTRL_CORE);
+ preg(CM_CLKSTCTRL_GFX);
+ preg(CM_CLKSTCTRL_DSP);
+ preg(CM_CLKSTCTRL_MDM);
+
+ preg(PM_PWSTCTRL_MPU);
+ preg(PM_PWSTCTRL_CORE);
+ preg(PM_PWSTCTRL_GFX);
+ preg(PM_PWSTCTRL_DSP);
+ preg(PM_PWSTCTRL_MDM);
+
+ preg(PM_PWSTST_MPU);
+ preg(PM_PWSTST_CORE);
+ preg(PM_PWSTST_GFX);
+ preg(PM_PWSTST_DSP);
+ preg(PM_PWSTST_MDM);
+
+ preg(CM_AUTOIDLE1_CORE);
+ preg(CM_AUTOIDLE2_CORE);
+ preg(CM_AUTOIDLE3_CORE);
+ preg(CM_AUTOIDLE4_CORE);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_AUTOIDLE_PLL);
+ preg(CM_AUTOIDLE_DSP);
+ preg(CM_AUTOIDLE_MDM);
+
+ preg(CM_ICLKEN1_CORE);
+ preg(CM_ICLKEN2_CORE);
+ preg(CM_ICLKEN3_CORE);
+ preg(CM_ICLKEN4_CORE);
+ preg(CM_ICLKEN_GFX);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_ICLKEN_DSP);
+ preg(CM_ICLKEN_MDM);
+
+ preg(CM_IDLEST1_CORE);
+ preg(CM_IDLEST2_CORE);
+ preg(CM_IDLEST3_CORE);
+ preg(CM_IDLEST4_CORE);
+ preg(CM_IDLEST_GFX);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_IDLEST_CKGEN);
+ preg(CM_IDLEST_DSP);
+ preg(CM_IDLEST_MDM);
+
+ preg(RM_RSTST_MPU);
+ preg(RM_RSTST_GFX);
+ preg(RM_RSTST_WKUP);
+ preg(RM_RSTST_DSP);
+ preg(RM_RSTST_MDM);
+
+ preg(PM_WKDEP_MPU);
+ preg(PM_WKDEP_CORE);
+ preg(PM_WKDEP_GFX);
+ preg(PM_WKDEP_DSP);
+ preg(PM_WKDEP_MDM);
+
+ preg(CM_FCLKEN_WKUP);
+ preg(CM_ICLKEN_WKUP);
+ preg(CM_IDLEST_WKUP);
+ preg(CM_AUTOIDLE_WKUP);
+ preg(CM_CLKSEL_WKUP);
+
+ preg(PM_WKEN_WKUP);
+ preg(PM_WKST_WKUP);
+}
+
+static inline void omap2_pm_save_registers(void)
+{
+ /* Save interrupt registers */
+ OMAP24XX_SAVE(INTC_MIR0);
+ OMAP24XX_SAVE(INTC_MIR1);
+ OMAP24XX_SAVE(INTC_MIR2);
+
+ /* Save power control registers */
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
+
+ /* Save power state registers */
+ OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
+ OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
+ OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
+ OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
+ OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
+
+ /* Save autoidle registers */
+ OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
+ OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
+ OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
+
+ /* Save idle state registers */
+ OMAP24XX_SAVE(CM_IDLEST1_CORE);
+ OMAP24XX_SAVE(CM_IDLEST2_CORE);
+ OMAP24XX_SAVE(CM_IDLEST3_CORE);
+ OMAP24XX_SAVE(CM_IDLEST4_CORE);
+ OMAP24XX_SAVE(CM_IDLEST_GFX);
+ OMAP24XX_SAVE(CM_IDLEST_WKUP);
+ OMAP24XX_SAVE(CM_IDLEST_CKGEN);
+ OMAP24XX_SAVE(CM_IDLEST_DSP);
+ OMAP24XX_SAVE(CM_IDLEST_MDM);
+
+ /* Save clock registers */
+ OMAP24XX_SAVE(CM_FCLKEN1_CORE);
+ OMAP24XX_SAVE(CM_FCLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN1_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN2_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN3_CORE);
+ OMAP24XX_SAVE(CM_ICLKEN4_CORE);
+}
+
+static inline void omap2_pm_restore_registers(void)
+{
+ /* Restore clock state registers */
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
+ OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
+
+ /* Restore power state registers */
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
+ OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
+
+ /* Restore idle state registers */
+ OMAP24XX_RESTORE(CM_IDLEST1_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST2_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST3_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST4_CORE);
+ OMAP24XX_RESTORE(CM_IDLEST_GFX);
+ OMAP24XX_RESTORE(CM_IDLEST_WKUP);
+ OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
+ OMAP24XX_RESTORE(CM_IDLEST_DSP);
+ OMAP24XX_RESTORE(CM_IDLEST_MDM);
+
+ /* Restore autoidle registers */
+ OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
+ OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
+
+ /* Restore clock registers */
+ OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
+ OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
+
+ /* REVISIT: Clear interrupts here */
+
+ /* Restore interrupt registers */
+ OMAP24XX_RESTORE(INTC_MIR0);
+ OMAP24XX_RESTORE(INTC_MIR1);
+ OMAP24XX_RESTORE(INTC_MIR2);
+}
+
+static int omap2_pm_suspend(void)
+{
+ int processor_type = 0;
+
+ /* REVISIT: 0x21 or 0x26? */
+ if (cpu_is_omap2420())
+ processor_type = 0x21;
+
+ if (!processor_type)
+ return -ENOTSUPP;
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ omap2_pm_save_registers();
+
+ /* Disable interrupts except for the wake events */
+ INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
+ INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
+ INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
+
+ pmdomain_set_autoidle();
+
+ /* Clear old wake-up events */
+ PM_WKST1_CORE = 0;
+ PM_WKST2_CORE = 0;
+ PM_WKST_WKUP = 0;
+
+ /* Enable wake-up events */
+ PM_WKEN1_CORE = (1 << 22) | (1 << 21); /* UART1 & 2 */
+ PM_WKEN2_CORE = (1 << 2); /* UART3 */
+ PM_WKEN_WKUP = (1 << 2) | (1 << 0); /* GPIO & GPT1 */
+
+ /* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
+ * in the SRAM suspend code */
+ CM_FCLKEN1_CORE = 0;
+ CM_FCLKEN2_CORE = 0;
+ CM_ICLKEN1_CORE = 0;
+ CM_ICLKEN3_CORE = 0;
+ CM_ICLKEN4_CORE = 0;
+
+ omap2_pm_debug("Status before suspend");
+
+ /* Must wait for serial buffers to clear */
+ mdelay(200);
+
+ /* Jump to SRAM suspend code
+ * REVISIT: When is this SDRC_DLLB_CTRL?
+ */
+ omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
+
+ /* Back from sleep */
+ omap2_pm_restore_registers();
+
+ local_fiq_enable();
+ local_irq_enable();
+
+ return 0;
+}
+
static int omap2_pm_enter(suspend_state_t state)
{
+ int ret = 0;
+
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- /* FIXME: Add suspend */
+ ret = omap2_pm_suspend();
break;
-
case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
+ ret = -ENOTSUPP;
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static int omap2_pm_finish(suspend_state_t state)
@@ -143,6 +400,8 @@ int __init omap2_pm_init(void)
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
+ pmdomain_init();
+
return 0;
}
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1d2f5ac2f69..cf78e6c5a27 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -6,6 +6,7 @@
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
*
* Some parts based off of TI's 24xx code:
*
@@ -22,54 +23,18 @@
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <asm/mach/time.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <asm/arch/dmtimer.h>
-#define OMAP2_GP_TIMER1_BASE 0x48028000
-#define OMAP2_GP_TIMER2_BASE 0x4802a000
-#define OMAP2_GP_TIMER3_BASE 0x48078000
-#define OMAP2_GP_TIMER4_BASE 0x4807a000
+static struct omap_dm_timer *gptimer;
-#define GP_TIMER_TIDR 0x00
-#define GP_TIMER_TISR 0x18
-#define GP_TIMER_TIER 0x1c
-#define GP_TIMER_TCLR 0x24
-#define GP_TIMER_TCRR 0x28
-#define GP_TIMER_TLDR 0x2c
-#define GP_TIMER_TSICR 0x40
-
-#define OS_TIMER_NR 1 /* GP timer 2 */
-
-static unsigned long timer_base[] = {
- IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
- IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
-};
-
-static inline unsigned int timer_read_reg(int nr, unsigned int reg)
-{
- return __raw_readl(timer_base[nr] + reg);
-}
-
-static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
-{
- __raw_writel(val, timer_base[nr] + reg);
-}
-
-/* Note that we always enable the clock prescale divider bit */
-static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+static inline void omap2_gp_timer_start(unsigned long load_val)
{
- unsigned int tmp;
-
- tmp = 0xffffffff - load_val;
-
- timer_write_reg(nr, GP_TIMER_TLDR, tmp);
- timer_write_reg(nr, GP_TIMER_TCRR, tmp);
- timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
- timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+ omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+ omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+ omap_dm_timer_start(gptimer);
}
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
@@ -77,7 +42,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
{
write_seqlock(&xtime_lock);
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+ omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
timer_tick(regs);
write_sequnlock(&xtime_lock);
@@ -87,41 +52,26 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
static struct irqaction omap2_gp_timer_irq = {
.name = "gp timer",
- .flags = SA_INTERRUPT,
+ .flags = SA_INTERRUPT | SA_TIMER,
.handler = omap2_gp_timer_interrupt,
};
static void __init omap2_gp_timer_init(void)
{
- struct clk * sys_ck;
- u32 tick_period = 120000;
- u32 l;
+ u32 tick_period;
- /* Reset clock and prescale value */
- timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+ omap_dm_timer_init();
+ gptimer = omap_dm_timer_request_specific(1);
+ BUG_ON(gptimer == NULL);
- sys_ck = clk_get(NULL, "sys_ck");
- if (IS_ERR(sys_ck))
- printk(KERN_ERR "Could not get sys_ck\n");
- else {
- clk_enable(sys_ck);
- tick_period = clk_get_rate(sys_ck) / 100;
- clk_put(sys_ck);
- }
-
- tick_period /= 2; /* Minimum prescale divider is 2 */
+ omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
tick_period -= 1;
- l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
- printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
- (l >> 4) & 0x0f, l & 0x0f);
-
- setup_irq(38, &omap2_gp_timer_irq);
-
- omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+ setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
+ omap2_gp_timer_start(tick_period);
}
struct sys_timer omap_timer = {
.init = omap2_gp_timer_init,
};
-
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index ea5137f319c..03d07cae26c 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -35,6 +35,10 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ select PXA27x
+
endchoice
if PXA_SHARPSL
@@ -55,6 +59,21 @@ endchoice
endif
+if MACH_TRIZEPS4
+
+choice
+ prompt "Select base board for Trizeps 4 module"
+
+config MACH_TRIZEPS4_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS4_ANY
+ bool "another Board"
+
+endchoice
+
+endif
+
endmenu
config MACH_POODLE
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 1610690be41..9093eb1c94e 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
@@ -23,6 +24,7 @@ led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
new file mode 100644
index 00000000000..14cfc85e44b
--- /dev/null
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/leds-trizeps4.c
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/leds.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+
+#include "leds.h"
+
+#define LED_STATE_ENABLED 1
+#define LED_STATE_CLAIMED 2
+
+#define SYS_BUSY 0x01
+#define HEARTBEAT 0x02
+#define BLINK 0x04
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void trizeps4_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch (evt) {
+ case led_start:
+ hw_led_state = 0;
+ pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
+ pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
+ led_state = LED_STATE_ENABLED;
+ break;
+
+ case led_stop:
+ led_state &= ~LED_STATE_ENABLED;
+ break;
+
+ case led_claim:
+ led_state |= LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+ case led_release:
+ led_state &= ~LED_STATE_CLAIMED;
+ hw_led_state = 0;
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer:
+ hw_led_state ^= HEARTBEAT;
+ break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ case led_idle_start:
+ hw_led_state &= ~SYS_BUSY;
+ break;
+
+ case led_idle_end:
+ hw_led_state |= SYS_BUSY;
+ break;
+#endif
+
+ case led_halted:
+ break;
+
+ case led_green_on:
+ hw_led_state |= BLINK;
+ break;
+
+ case led_green_off:
+ hw_led_state &= ~BLINK;
+ break;
+
+ case led_amber_on:
+ break;
+
+ case led_amber_off:
+ break;
+
+ case led_red_on:
+ break;
+
+ case led_red_off:
+ break;
+
+ default:
+ break;
+ }
+
+ if (led_state & LED_STATE_ENABLED) {
+ switch (hw_led_state) {
+ case 0:
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 1:
+ GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 2:
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ case 3:
+ GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ break;
+ }
+ }
+ else {
+ /* turn all off */
+ GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
+ GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+ }
+
+ local_irq_restore(flags);
+}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index bbe4d5f6afa..e13eb841e48 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,6 +24,8 @@ pxa_leds_init(void)
leds_event = mainstone_leds_event;
if (machine_is_pxa_idp())
leds_event = idp_leds_event;
+ if (machine_is_trizeps4())
+ leds_event = trizeps4_leds_event;
leds_event(led_start);
return 0;
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
index d98f6e93c12..4f829b8c39d 100644
--- a/arch/arm/mach-pxa/leds.h
+++ b/arch/arm/mach-pxa/leds.h
@@ -10,3 +10,4 @@
extern void idp_leds_event(led_event_t evt);
extern void lubbock_leds_event(led_event_t evt);
extern void mainstone_leds_event(led_event_t evt);
+extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index ec0f43a102c..1a5f5c21481 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -248,58 +248,137 @@ static void lpd270_backlight_power(int on)
/* 5.7" TFT QVGA (LoLo display number 1) */
static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
- .pixclock = 100000,
- .xres = 240,
- .yres = 320,
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
.bpp = 16,
- .hsync_len = 64,
- .left_margin = 0x27,
- .right_margin = 0x09,
- .vsync_len = 0x04,
+ .hsync_len = 0x14,
+ .left_margin = 0x28,
+ .right_margin = 0x0a,
+ .vsync_len = 0x02,
.upper_margin = 0x08,
.lower_margin = 0x14,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400007,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
+ .pixclock = 50000,
+ .xres = 800,
+ .yres = 600,
+ .bpp = 16,
+ .hsync_len = 0x05,
+ .left_margin = 0x52,
+ .right_margin = 0x05,
+ .vsync_len = 0x04,
+ .upper_margin = 0x14,
+ .lower_margin = 0x0a,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
+ .pixclock = 150000,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 16,
+ .hsync_len = 0x0e,
+ .left_margin = 0x04,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
+ .upper_margin = 0x03,
+ .lower_margin = 0x03,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
/* 6.4" TFT VGA (LoLo display number 5) */
static struct pxafb_mach_info sharp_lq64d343 __initdata = {
- .pixclock = 20000,
+ .pixclock = 25000,
.xres = 640,
.yres = 480,
.bpp = 16,
- .hsync_len = 49,
+ .hsync_len = 0x31,
.left_margin = 0x89,
.right_margin = 0x19,
- .vsync_len = 18,
+ .vsync_len = 0x12,
.upper_margin = 0x22,
- .lower_margin = 0,
+ .lower_margin = 0x00,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400001,
+ .lccr3 = 0x00400000,
+ .pxafb_backlight_power = lpd270_backlight_power,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mach_info sharp_lq10d368 __initdata = {
+ .pixclock = 25000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 0x31,
+ .left_margin = 0x89,
+ .right_margin = 0x19,
+ .vsync_len = 0x12,
+ .upper_margin = 0x22,
+ .lower_margin = 0x00,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = 0x07800080,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
/* 3.5" TFT QVGA (LoLo display number 8) */
static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
- .pixclock = 100000,
+ .pixclock = 150000,
.xres = 240,
.yres = 320,
.bpp = 16,
- .hsync_len = 0x34,
- .left_margin = 0x09,
- .right_margin = 0x09,
- .vsync_len = 0x08,
+ .hsync_len = 0x0e,
+ .left_margin = 0x0a,
+ .right_margin = 0x0a,
+ .vsync_len = 0x03,
.upper_margin = 0x05,
.lower_margin = 0x14,
- .sync = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.lccr0 = 0x07800080,
- .lccr3 = 0x04400007,
+ .lccr3 = 0x00400000,
.pxafb_backlight_power = lpd270_backlight_power,
};
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+ if (!strnicmp(str, "lq057q3dc02", 11)) {
+ lpd270_lcd_to_use = &sharp_lq057q3dc02;
+ } else if (!strnicmp(str, "lq121s1dg31", 11)) {
+ lpd270_lcd_to_use = &sharp_lq121s1dg31;
+ } else if (!strnicmp(str, "lq036q1da01", 11)) {
+ lpd270_lcd_to_use = &sharp_lq036q1da01;
+ } else if (!strnicmp(str, "lq64d343", 8)) {
+ lpd270_lcd_to_use = &sharp_lq64d343;
+ } else if (!strnicmp(str, "lq10d368", 8)) {
+ lpd270_lcd_to_use = &sharp_lq10d368;
+ } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
+ lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+ } else {
+ printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+ }
+
+ return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&lpd270_audio_device,
@@ -345,9 +424,8 @@ static void __init lpd270_init(void)
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- // set_pxa_fb_info(&sharp_lq057q3dc02);
- set_pxa_fb_info(&sharp_lq64d343);
- // set_pxa_fb_info(&sharp_lq035q7db02_20);
+ if (lpd270_lcd_to_use != NULL)
+ set_pxa_fb_info(lpd270_lcd_to_use);
pxa_set_ohci_info(&lpd270_ohci_platform_data);
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
new file mode 100644
index 00000000000..4ffff9e95ec
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -0,0 +1,471 @@
+/*
+ * linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ * Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/********************************************************************************************
+ * ONBOARD FLASH
+ ********************************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },{
+ .name = "Kernel",
+ .size = 0x00400000,
+ .offset = 0x00040000
+ },{
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00440000
+ }
+};
+
+static struct flash_platform_data trizeps4_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = trizeps4_partitions,
+ .nr_parts = ARRAY_SIZE(trizeps4_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &trizeps4_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/********************************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ********************************************************************************************/
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = TRIZEPS4_ETH_PHYS+0x300,
+ .end = TRIZEPS4_ETH_PHYS+0x400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = TRIZEPS4_ETH_PHYS+0x8300,
+ .end = TRIZEPS4_ETH_PHYS+0x8400-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = TRIZEPS4_ETH_IRQ,
+ .end = TRIZEPS4_ETH_IRQ,
+ .flags = (IORESOURCE_IRQ | IRQT_RISING),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+
+/********************************************************************************************
+ * PXA270 serial ports
+ ********************************************************************************************/
+static struct plat_serial8250_port tri_serial_ports[] = {
+#ifdef CONFIG_SERIAL_PXA
+ /* this uses the own PXA driver */
+ {
+ 0,
+ },
+#else
+ /* this uses the generic 8520 driver */
+ [0] = {
+ .membase = (void *)&FFUART,
+ .irq = IRQ_FFUART,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = (921600*16),
+ },
+ [1] = {
+ .membase = (void *)&BTUART,
+ .irq = IRQ_BTUART,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ .uartclk = (921600*16),
+ },
+ {
+ 0,
+ },
+#endif
+};
+
+static struct platform_device uart_devices = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = tri_serial_ports,
+ },
+ .num_resources = 0,
+ .resource = NULL,
+};
+
+/********************************************************************************************
+ * PXA270 ac97 sound codec
+ ********************************************************************************************/
+static struct platform_device ac97_audio_device = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+};
+
+static struct platform_device * trizeps4_devices[] __initdata = {
+ &flash_device,
+ &uart_devices,
+ &dm9000_device,
+ &ac97_audio_device,
+};
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+ if (power) {
+ /* switch power on, put in reset and enable buffers */
+ trizeps_conxs_bcr |= power;
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
+ ConXS_BCR = trizeps_conxs_bcr;
+ /* wait a little */
+ udelay(2000);
+ /* take reset away */
+ trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
+ ConXS_BCR = trizeps_conxs_bcr;
+ udelay(2000);
+ } else {
+ /* put in reset */
+ trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+ ConXS_BCR = trizeps_conxs_bcr;
+ udelay(1000);
+ /* switch power off */
+ trizeps_conxs_bcr &= ~(0xf);
+ ConXS_BCR = trizeps_conxs_bcr;
+
+ }
+ pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+}
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+ if (on) {
+ trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+ } else {
+ trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+ }
+ pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+ ConXS_BCR = trizeps_conxs_bcr;
+}
+
+/* Powersupply for MMC/SD cardslot */
+static void board_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask) {
+ pr_debug("%s: on\n", __FUNCTION__);
+ /* FIXME fill in values here */
+ } else {
+ pr_debug("%s: off\n", __FUNCTION__);
+ /* FIXME fill in values here */
+ }
+}
+
+static short trizeps_conxs_ircr;
+
+/* Switch modes and Power for IRDA receiver */
+static void board_irda_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ /* Slow mode */
+ trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
+ } else if (mode & IR_FIRMODE) {
+ /* Fast mode */
+ trizeps_conxs_ircr |= ConXS_IRCR_MODE;
+ }
+ if (mode & IR_OFF) {
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ } else {
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+ }
+ /* FIXME write values to register */
+ local_irq_restore(flags);
+}
+
+#else
+/* for other baseboards define dummies */
+void board_pcmcia_power(int power) {;}
+#define board_backlight_power NULL
+#define board_mci_power NULL
+#define board_irda_mode NULL
+
+#endif /* CONFIG_MACH_TRIZEPS4_CONXS */
+EXPORT_SYMBOL(board_pcmcia_power);
+
+static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+ /* setup GPIO for PXA27x MMC controller */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+ err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+ free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = trizeps4_mci_init,
+ .exit = trizeps4_mci_exit,
+ .setpower = board_mci_power,
+};
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = board_irda_mode,
+};
+
+static int trizeps4_ohci_init(struct device *dev)
+{
+ /* setup Port1 GPIO pin. */
+ pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
+ pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
+
+ /* Set the Power Control Polarity Low and Power Sense
+ Polarity Low to active low. */
+ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+ return 0;
+}
+
+static void trizeps4_ohci_exit(struct device *dev)
+{
+ ;
+}
+
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .init = trizeps4_ohci_init,
+ .exit = trizeps4_ohci_exit,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+ { /* ConXS CFSR */
+ .virtual = TRIZEPS4_CFSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS BCR */
+ .virtual = TRIZEPS4_BOCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS IRCR */
+ .virtual = TRIZEPS4_IRCR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS DCR */
+ .virtual = TRIZEPS4_DICR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ },
+ { /* ConXS UPSR */
+ .virtual = TRIZEPS4_UPSR_VIRT,
+ .pfn = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+ .length = 0x00001000,
+ .type = MT_DEVICE
+ }
+};
+
+static struct pxafb_mach_info sharp_lcd __initdata = {
+ .pixclock = 78000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 4,
+ .left_margin = 4,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
+ .lccr3 = 0x0340ff02,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+}
+
+static void __init trizeps4_init(void)
+{
+ platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+
+ set_pxa_fb_info(&sharp_lcd);
+
+ pxa_set_mci_info(&trizeps4_mci_platform_data);
+ pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+ pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+}
+
+static void __init trizeps4_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+ /* for DiskOnChip */
+ pxa_gpio_mode(GPIO15_nCS_1_MD);
+
+ /* for off-module PIC on ConXS board */
+ pxa_gpio_mode(GPIO_PIC | GPIO_IN);
+
+ /* UCB1400 irq */
+ pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
+
+ /* for DM9000 LAN */
+ pxa_gpio_mode(GPIO78_nCS_2_MD);
+ pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+
+ /* for PCMCIA device */
+ pxa_gpio_mode(GPIO_PCD | GPIO_IN);
+ pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
+
+ /* for I2C adapter */
+ pxa_gpio_mode(GPIO117_I2CSCL_MD);
+ pxa_gpio_mode(GPIO118_I2CSDA_MD);
+
+ /* MMC_DET s.o. */
+ pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+ /* whats that for ??? */
+ pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+ pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
+ pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+#ifdef CONFIG_IDE_PXA_CF
+ /* if boot direct from compact flash dont disable power */
+ trizeps_conxs_bcr = 0x0009;
+#else
+ /* this is the reset value */
+ trizeps_conxs_bcr = 0x00A0;
+#endif
+ ConXS_BCR = trizeps_conxs_bcr;
+#endif
+
+ PWER = 0x00000002;
+ PFER = 0x00000000;
+ PRER = 0x00000002;
+ PGSR0 = 0x0158C000;
+ PGSR1 = 0x00FF0080;
+ PGSR2 = 0x0001C004;
+ /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+ PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .fixup = trizeps4_fixup,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .init_irq = pxa_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 04c94ab6c18..63959772993 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -15,7 +15,10 @@
* SDRAM reads (rev A0, B0, B1)
*
* We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
+ *
+ * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
*/
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -35,6 +38,7 @@
static struct cpufreq_driver sa1110_driver;
struct sdram_params {
+ const char name[16];
u_char rows; /* bits */
u_char cas_latency; /* cycles */
u_char tck; /* clock cycle time (ns) */
@@ -50,54 +54,53 @@ struct sdram_info {
u_int mdcas[3];
};
-static struct sdram_params tc59sm716_cl2_params __initdata = {
- .rows = 12,
- .tck = 10,
- .trcd = 20,
- .trp = 20,
- .twr = 10,
- .refresh = 64000,
- .cas_latency = 2,
-};
-
-static struct sdram_params tc59sm716_cl3_params __initdata = {
- .rows = 12,
- .tck = 8,
- .trcd = 20,
- .trp = 20,
- .twr = 8,
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params samsung_k4s641632d_tc75 __initdata = {
- .rows = 14,
- .tck = 9,
- .trcd = 27,
- .trp = 20,
- .twr = 9,
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params samsung_km416s4030ct __initdata = {
- .rows = 13,
- .tck = 8,
- .trcd = 24, /* 3 CLKs */
- .trp = 24, /* 3 CLKs */
- .twr = 16, /* Trdl: 2 CLKs */
- .refresh = 64000,
- .cas_latency = 3,
-};
-
-static struct sdram_params wbond_w982516ah75l_cl3_params __initdata = {
- .rows = 16,
- .tck = 8,
- .trcd = 20,
- .trp = 20,
- .twr = 8,
- .refresh = 64000,
- .cas_latency = 3,
+static struct sdram_params sdram_tbl[] __initdata = {
+ { /* Toshiba TC59SM716 CL2 */
+ .name = "TC59SM716-CL2",
+ .rows = 12,
+ .tck = 10,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 10,
+ .refresh = 64000,
+ .cas_latency = 2,
+ }, { /* Toshiba TC59SM716 CL3 */
+ .name = "TC59SM716-CL3",
+ .rows = 12,
+ .tck = 8,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 8,
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Samsung K4S641632D TC75 */
+ .name = "K4S641632D",
+ .rows = 14,
+ .tck = 9,
+ .trcd = 27,
+ .trp = 20,
+ .twr = 9,
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Samsung KM416S4030CT */
+ .name = "KM416S4030CT",
+ .rows = 13,
+ .tck = 8,
+ .trcd = 24, /* 3 CLKs */
+ .trp = 24, /* 3 CLKs */
+ .twr = 16, /* Trdl: 2 CLKs */
+ .refresh = 64000,
+ .cas_latency = 3,
+ }, { /* Winbond W982516AH75L CL3 */
+ .name = "W982516AH75L",
+ .rows = 16,
+ .tck = 8,
+ .trcd = 20,
+ .trp = 20,
+ .twr = 8,
+ .refresh = 64000,
+ .cas_latency = 3,
+ },
};
static struct sdram_params sdram_params;
@@ -336,19 +339,36 @@ static struct cpufreq_driver sa1110_driver = {
.name = "sa1110",
};
+static struct sdram_params *sa1110_find_sdram(const char *name)
+{
+ struct sdram_params *sdram;
+
+ for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
+ if (strcmp(name, sdram->name) == 0)
+ return sdram;
+
+ return NULL;
+}
+
+static char sdram_name[16];
+
static int __init sa1110_clk_init(void)
{
- struct sdram_params *sdram = NULL;
+ struct sdram_params *sdram;
+ const char *name = sdram_name;
- if (machine_is_assabet())
- sdram = &tc59sm716_cl3_params;
+ if (!name[0]) {
+ if (machine_is_assabet())
+ name = "TC59SM716-CL3";
- if (machine_is_pt_system3())
- sdram = &samsung_k4s641632d_tc75;
+ if (machine_is_pt_system3())
+ name = "K4S641632D";
- if (machine_is_h3100())
- sdram = &samsung_km416s4030ct;
+ if (machine_is_h3100())
+ name = "KM416S4030CT";
+ }
+ sdram = sa1110_find_sdram(name);
if (sdram) {
printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
" twr: %d refresh: %d cas_latency: %d\n",
@@ -363,4 +383,5 @@ static int __init sa1110_clk_init(void)
return 0;
}
+module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
arch_initcall(sa1110_clk_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4bca753165..5f80f184cd3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -121,8 +121,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7691cfdba56..7eac87f0518 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -27,7 +27,16 @@
#include <asm/cacheflush.h>
#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_ARM_SECTION_MAPPING 0x80000000
static inline void
remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
@@ -113,10 +122,168 @@ remap_area_pages(unsigned long start, unsigned long pfn,
dir++;
} while (address && (address < end));
- flush_cache_vmap(start, end);
return err;
}
+
+void __check_kvm_seq(struct mm_struct *mm)
+{
+ unsigned int seq;
+
+ do {
+ seq = init_mm.context.kvm_seq;
+ memcpy(pgd_offset(mm, VMALLOC_START),
+ pgd_offset_k(VMALLOC_START),
+ sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
+ pgd_index(VMALLOC_START)));
+ mm->context.kvm_seq = seq;
+ } while (seq != init_mm.context.kvm_seq);
+}
+
+#ifndef CONFIG_SMP
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area() allocates a guard 4K page, so we need to mask
+ * the size back to 1MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+ unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+ pgd_t *pgd;
+
+ flush_cache_vunmap(addr, end);
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+
+ pmd = *pmdp;
+ if (!pmd_none(pmd)) {
+ /*
+ * Clear the PMD from the page table, and
+ * increment the kvm sequence so others
+ * notice this change.
+ *
+ * Note: this is still racy on SMP machines.
+ */
+ pmd_clear(pmdp);
+ init_mm.context.kvm_seq++;
+
+ /*
+ * Free the page table, if there was one.
+ */
+ if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+ pte_free_kernel(pmd_page_kernel(pmd));
+ }
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ /*
+ * Ensure that the active_mm is up to date - we want to
+ * catch any use-after-iounmap cases.
+ */
+ if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq)
+ __check_kvm_seq(current->active_mm);
+
+ flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+ unsigned long size, unsigned long flags)
+{
+ unsigned long prot, addr = virt, end = virt + size;
+ pgd_t *pgd;
+
+ /*
+ * Remove and free any PTE-based mapping, and
+ * sync the current kernel mapping.
+ */
+ unmap_area_sections(virt, size);
+
+ prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO) |
+ (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+ /*
+ * ARMv6 and above need XN set to prevent speculative prefetches
+ * hitting IO.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6)
+ prot |= PMD_SECT_XN;
+
+ pgd = pgd_offset_k(addr);
+ do {
+ pmd_t *pmd = pmd_offset(pgd, addr);
+
+ pmd[0] = __pmd(__pfn_to_phys(pfn) | prot);
+ pfn += SZ_1M >> PAGE_SHIFT;
+ pmd[1] = __pmd(__pfn_to_phys(pfn) | prot);
+ pfn += SZ_1M >> PAGE_SHIFT;
+ flush_pmd_entry(pmd);
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ } while (addr < end);
+
+ return 0;
+}
+
+static int
+remap_area_supersections(unsigned long virt, unsigned long pfn,
+ unsigned long size, unsigned long flags)
+{
+ unsigned long prot, addr = virt, end = virt + size;
+ pgd_t *pgd;
+
+ /*
+ * Remove and free any PTE-based mapping, and
+ * sync the current kernel mapping.
+ */
+ unmap_area_sections(virt, size);
+
+ prot = PMD_TYPE_SECT | PMD_SECT_SUPER | PMD_SECT_AP_WRITE |
+ PMD_DOMAIN(DOMAIN_IO) |
+ (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+ /*
+ * ARMv6 and above need XN set to prevent speculative prefetches
+ * hitting IO.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6)
+ prot |= PMD_SECT_XN;
+
+ pgd = pgd_offset_k(virt);
+ do {
+ unsigned long super_pmd_val, i;
+
+ super_pmd_val = __pfn_to_phys(pfn) | prot;
+ super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
+
+ for (i = 0; i < 8; i++) {
+ pmd_t *pmd = pmd_offset(pgd, addr);
+
+ pmd[0] = __pmd(super_pmd_val);
+ pmd[1] = __pmd(super_pmd_val);
+ flush_pmd_entry(pmd);
+
+ addr += PGDIR_SIZE;
+ pgd++;
+ }
+
+ pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
+ } while (addr < end);
+
+ return 0;
+}
+#endif
+
+
/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
@@ -133,18 +300,42 @@ void __iomem *
__ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
unsigned long flags)
{
+ int err;
unsigned long addr;
struct vm_struct * area;
+ unsigned int cr = get_cr();
+
+ /*
+ * High mappings must be supersection aligned
+ */
+ if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
+ return NULL;
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
- if (remap_area_pages(addr, pfn, size, flags)) {
+
+#ifndef CONFIG_SMP
+ if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (cr & CR_XP)) ||
+ cpu_is_xsc3()) &&
+ !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
+ area->flags |= VM_ARM_SECTION_MAPPING;
+ err = remap_area_supersections(addr, pfn, size, flags);
+ } else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+ area->flags |= VM_ARM_SECTION_MAPPING;
+ err = remap_area_sections(addr, pfn, size, flags);
+ } else
+#endif
+ err = remap_area_pages(addr, pfn, size, flags);
+
+ if (err) {
vunmap((void *)addr);
return NULL;
}
- return (void __iomem *) (offset + (char *)addr);
+
+ flush_cache_vmap(addr, addr + size);
+ return (void __iomem *) (offset + addr);
}
EXPORT_SYMBOL(__ioremap_pfn);
@@ -173,6 +364,34 @@ EXPORT_SYMBOL(__ioremap);
void __iounmap(void __iomem *addr)
{
- vunmap((void *)(PAGE_MASK & (unsigned long)addr));
+ struct vm_struct **p, *tmp;
+ unsigned int section_mapping = 0;
+
+ addr = (void __iomem *)(PAGE_MASK & (unsigned long)addr);
+
+ /*
+ * If this is a section based mapping we need to handle it
+ * specially as the VM subysystem does not know how to handle
+ * such a beast. We need the lock here b/c we need to clear
+ * all the mappings before the area can be reclaimed
+ * by someone else.
+ */
+ write_lock(&vmlist_lock);
+ for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+ if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+ if (tmp->flags & VM_ARM_SECTION_MAPPING) {
+ *p = tmp->next;
+ unmap_area_sections((unsigned long)tmp->addr,
+ tmp->size);
+ kfree(tmp);
+ section_mapping = 1;
+ }
+ break;
+ }
+ }
+ write_unlock(&vmlist_lock);
+
+ if (!section_mapping)
+ vunmap(addr);
}
EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index b0242c6ea06..38769f5862b 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -302,16 +302,16 @@ static struct mem_types mem_types[] __initdata = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
PMD_SECT_AP_WRITE,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
- .prot_sect = PMD_TYPE_SECT,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
.domain = DOMAIN_KERNEL,
},
[MT_MINICLEAN] = {
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_MINICACHE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
[MT_LOW_VECTORS] = {
@@ -327,25 +327,25 @@ static struct mem_types mem_types[] __initdata = {
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_ROM] = {
- .prot_sect = PMD_TYPE_SECT,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
.domain = DOMAIN_KERNEL,
},
[MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_WRITE,
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
},
[MT_NONSHARED_DEVICE] = {
.prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
PMD_SECT_AP_WRITE,
.domain = DOMAIN_IO,
}
@@ -375,14 +375,21 @@ void __init build_mem_type_table(void)
ecc_mask = 0;
}
- if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
- for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+ /*
+ * Xscale must not have PMD bit 4 set for section mappings.
+ */
+ if (cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ mem_types[i].prot_sect &= ~PMD_BIT4;
+
+ /*
+ * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+ * page tables.
+ */
+ if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
- if (mem_types[i].prot_sect)
- mem_types[i].prot_sect |= PMD_BIT4;
- }
- }
cp = &cache_policies[cachepolicy];
kern_pgprot = user_pgprot = cp->pte;
@@ -406,8 +413,8 @@ void __init build_mem_type_table(void)
* bit 4 becomes XN which we must clear for the
* kernel memory mapping.
*/
- mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
- mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+ mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+ mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
/*
* Mark cache clean areas and XIP ROM read only
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index cc609666df0..700297ae4a5 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -439,11 +439,12 @@ __arm1020_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+
+ adr r5, arm1020_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1020_cr1_clear
bic r0, r0, r5
- ldr r5, arm1020_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -455,12 +456,9 @@ __arm1020_setup:
* .RVI ZFRS BLDP WCAM
* .011 1001 ..11 0101
*/
- .type arm1020_cr1_clear, #object
- .type arm1020_cr1_set, #object
-arm1020_cr1_clear:
- .word 0x593f
-arm1020_cr1_set:
- .word 0x3935
+ .type arm1020_crval, #object
+arm1020_crval:
+ crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -526,6 +524,9 @@ __arm1020_proc_info:
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1020_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 117a946c28c..0c33a5ed5a6 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -421,11 +421,11 @@ __arm1020e_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm1020e_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1020e_cr1_clear
bic r0, r0, r5
- ldr r5, arm1020e_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -437,12 +437,9 @@ __arm1020e_setup:
* .RVI ZFRS BLDP WCAM
* .011 1001 ..11 0101
*/
- .type arm1020e_cr1_clear, #object
- .type arm1020e_cr1_set, #object
-arm1020e_cr1_clear:
- .word 0x5f3f
-arm1020e_cr1_set:
- .word 0x3935
+ .type arm1020e_crval, #object
+arm1020e_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -476,25 +473,7 @@ cpu_elf_name:
.type cpu_arm1020e_name, #object
cpu_arm1020e_name:
- .ascii "ARM1020E"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1020E"
.size cpu_arm1020e_name, . - cpu_arm1020e_name
.align
@@ -509,6 +488,10 @@ __arm1020e_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1020e_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 39b7c102180..566a5565307 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -403,11 +403,11 @@ __arm1022_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm1022_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1022_cr1_clear
bic r0, r0, r5
- ldr r5, arm1022_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R..............
#endif
@@ -420,12 +420,9 @@ __arm1022_setup:
* .011 1001 ..11 0101
*
*/
- .type arm1022_cr1_clear, #object
- .type arm1022_cr1_set, #object
-arm1022_cr1_clear:
- .word 0x7f3f
-arm1022_cr1_set:
- .word 0x3935
+ .type arm1022_crval, #object
+arm1022_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
@@ -459,25 +456,7 @@ cpu_elf_name:
.type cpu_arm1022_name, #object
cpu_arm1022_name:
- .ascii "arm1022"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1022"
.size cpu_arm1022_name, . - cpu_arm1022_name
.align
@@ -492,6 +471,10 @@ __arm1022_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1022_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 33e1ab8eb1d..6ea76321d0d 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -398,11 +398,11 @@ __arm1026_setup:
mov r0, #4 @ explicitly disable writeback
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, arm1026_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm1026_cr1_clear
bic r0, r0, r5
- ldr r5, arm1026_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .R.. .... .... ....
#endif
@@ -415,12 +415,9 @@ __arm1026_setup:
* .011 1001 ..11 0101
*
*/
- .type arm1026_cr1_clear, #object
- .type arm1026_cr1_set, #object
-arm1026_cr1_clear:
- .word 0x7f3f
-arm1026_cr1_set:
- .word 0x3935
+ .type arm1026_crval, #object
+arm1026_crval:
+ crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
__INITDATA
@@ -455,25 +452,7 @@ cpu_elf_name:
.type cpu_arm1026_name, #object
cpu_arm1026_name:
- .ascii "ARM1026EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
- .ascii "B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
- .ascii "\0"
+ .asciz "ARM1026EJ-S"
.size cpu_arm1026_name, . - cpu_arm1026_name
.align
@@ -488,6 +467,10 @@ __arm1026_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm1026_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 7a705edfa4b..0432e480688 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -355,6 +355,10 @@ __arm6_proc_info:
.long 0x41560600
.long 0xfffffff0
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -371,6 +375,10 @@ __arm610_proc_info:
.long 0x41560610
.long 0xfffffff0
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm6_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -387,6 +395,10 @@ __arm7_proc_info:
.long 0x41007000
.long 0xffffff00
.long 0x00000c1e
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -408,6 +420,10 @@ __arm710_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm7_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 86102467d37..0e6946ab6e5 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -169,11 +169,11 @@ __arm720_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4)
#endif
+ adr r5, arm720_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
- ldr r5, arm720_cr1_clear
bic r0, r0, r5
- ldr r5, arm720_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr @ __ret (head.S)
.size __arm720_setup, . - __arm720_setup
@@ -183,12 +183,9 @@ __arm720_setup:
* ..1. 1001 ..11 1101
*
*/
- .type arm720_cr1_clear, #object
- .type arm720_cr1_set, #object
-arm720_cr1_clear:
- .word 0x2f3f
-arm720_cr1_set:
- .word 0x213d
+ .type arm720_crval, #object
+arm720_crval:
+ crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
__INITDATA
@@ -246,6 +243,10 @@ __arm710_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm710_setup @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
@@ -267,6 +268,10 @@ __arm720_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm720_setup @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 6f0db29ab84..4adb46b3a4e 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -390,11 +390,11 @@ __arm920_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm920_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm920_cr1_clear
bic r0, r0, r5
- ldr r5, arm920_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __arm920_setup, . - __arm920_setup
@@ -404,12 +404,9 @@ __arm920_setup:
* ..11 0001 ..11 0101
*
*/
- .type arm920_cr1_clear, #object
- .type arm920_cr1_set, #object
-arm920_cr1_clear:
- .word 0x3f3f
-arm920_cr1_set:
- .word 0x3135
+ .type arm920_crval, #object
+arm920_crval:
+ crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
@@ -443,19 +440,7 @@ cpu_elf_name:
.type cpu_arm920_name, #object
cpu_arm920_name:
- .ascii "ARM920T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM920T"
.size cpu_arm920_name, . - cpu_arm920_name
.align
@@ -472,6 +457,10 @@ __arm920_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm920_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 1ad464cc7bc..571f082f024 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -394,11 +394,11 @@ __arm922_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, arm922_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm922_cr1_clear
bic r0, r0, r5
- ldr r5, arm922_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __arm922_setup, . - __arm922_setup
@@ -408,12 +408,9 @@ __arm922_setup:
* ..11 0001 ..11 0101
*
*/
- .type arm922_cr1_clear, #object
- .type arm922_cr1_set, #object
-arm922_cr1_clear:
- .word 0x3f3f
-arm922_cr1_set:
- .word 0x3135
+ .type arm922_crval, #object
+arm922_crval:
+ crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
@@ -447,19 +444,7 @@ cpu_elf_name:
.type cpu_arm922_name, #object
cpu_arm922_name:
- .ascii "ARM922T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM922T"
.size cpu_arm922_name, . - cpu_arm922_name
.align
@@ -476,6 +461,10 @@ __arm922_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm922_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index a55d56ce226..ad15f8503d5 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -454,11 +454,10 @@ __arm925_setup:
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm925_cr1_clear
bic r0, r0, r5
- ldr r5, arm925_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .1.. .... .... ....
#endif
@@ -471,12 +470,9 @@ __arm925_setup:
* .011 0001 ..11 1101
*
*/
- .type arm925_cr1_clear, #object
- .type arm925_cr1_set, #object
-arm925_cr1_clear:
- .word 0x7f3f
-arm925_cr1_set:
- .word 0x313d
+ .type arm925_crval, #object
+arm925_crval:
+ crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
__INITDATA
@@ -510,22 +506,7 @@ cpu_elf_name:
.type cpu_arm925_name, #object
cpu_arm925_name:
- .ascii "ARM925T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM925T"
.size cpu_arm925_name, . - cpu_arm925_name
.align
@@ -540,6 +521,10 @@ __arm925_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm925_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -559,6 +544,10 @@ __arm915_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm925_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 20275967663..1e89d408047 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -403,11 +403,11 @@ __arm926_setup:
mcr p15, 7, r0, c15, c0, 0
#endif
+ adr r5, arm926_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, arm926_cr1_clear
bic r0, r0, r5
- ldr r5, arm926_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
orr r0, r0, #0x4000 @ .1.. .... .... ....
#endif
@@ -420,12 +420,9 @@ __arm926_setup:
* .011 0001 ..11 0101
*
*/
- .type arm926_cr1_clear, #object
- .type arm926_cr1_set, #object
-arm926_cr1_clear:
- .word 0x7f3f
-arm926_cr1_set:
- .word 0x3135
+ .type arm926_crval, #object
+arm926_crval:
+ crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
__INITDATA
@@ -459,22 +456,7 @@ cpu_elf_name:
.type cpu_arm926_name, #object
cpu_arm926_name:
- .ascii "ARM926EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- .ascii "i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- .ascii "d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
- .ascii "(wt)"
-#else
- .ascii "(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- .ascii "RR"
-#endif
-#endif
- .ascii "\0"
+ .asciz "ARM926EJ-S"
.size cpu_arm926_name, . - cpu_arm926_name
.align
@@ -491,6 +473,10 @@ __arm926_proc_info:
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __arm926_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7cfc2604a1e..9e2c89eb211 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -49,3 +49,13 @@
.macro asid, rd, rn
and \rd, \rn, #255
.endm
+
+ .macro crval, clear, mmuset, ucset
+#ifdef CONFIG_MMU
+ .word \clear
+ .word \mmuset
+#else
+ .word \clear
+ .word \ucset
+#endif
+ .endm
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 5a760a2c629..e812246277c 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -185,11 +185,12 @@ __sa110_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
#endif
+
+ adr r5, sa110_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, sa110_cr1_clear
bic r0, r0, r5
- ldr r5, sa110_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __sa110_setup, . - __sa110_setup
@@ -199,12 +200,9 @@ __sa110_setup:
* ..01 0001 ..11 1101
*
*/
- .type sa110_cr1_clear, #object
- .type sa110_cr1_set, #object
-sa110_cr1_clear:
- .word 0x3f3f
-sa110_cr1_set:
- .word 0x113d
+ .type sa110_crval, #object
+sa110_crval:
+ crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
__INITDATA
@@ -255,6 +253,9 @@ __sa110_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa110_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 0a2107ad4c3..ba32cc6296a 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -198,11 +198,11 @@ __sa1100_setup:
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
+ adr r5, sa1100_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register v4
- ldr r5, sa1100_cr1_clear
bic r0, r0, r5
- ldr r5, sa1100_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __sa1100_setup, . - __sa1100_setup
@@ -212,12 +212,9 @@ __sa1100_setup:
* ..11 0001 ..11 1101
*
*/
- .type sa1100_cr1_clear, #object
- .type sa1100_cr1_set, #object
-sa1100_cr1_clear:
- .word 0x3f3f
-sa1100_cr1_set:
- .word 0x313d
+ .type sa1100_crval, #object
+sa1100_crval:
+ crval clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
__INITDATA
@@ -276,6 +273,9 @@ __sa1100_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa1100_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -296,6 +296,9 @@ __sa1110_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __sa1100_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index ca13d4d05f6..6f72549f884 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -212,11 +212,11 @@ __v6_setup:
orr r0, r0, #(0xf << 20)
mcr p15, 0, r0, c1, c0, 2 @ Enable full access to VFP
#endif
+ adr r5, v6_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ read control register
- ldr r5, v6_cr1_clear @ get mask for bits to clear
bic r0, r0, r5 @ clear bits them
- ldr r5, v6_cr1_set @ get mask for bits to set
- orr r0, r0, r5 @ set them
+ orr r0, r0, r6 @ set them
mov pc, lr @ return to head.S:__ret
/*
@@ -225,12 +225,9 @@ __v6_setup:
* rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
* 0 110 0011 1.00 .111 1101 < we want
*/
- .type v6_cr1_clear, #object
- .type v6_cr1_set, #object
-v6_cr1_clear:
- .word 0x01e0fb7f
-v6_cr1_set:
- .word 0x00c0387d
+ .type v6_crval, #object
+v6_crval:
+ crval clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
.type v6_processor_functions, #object
ENTRY(v6_processor_functions)
@@ -269,6 +266,10 @@ __v6_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __v6_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8d32e21fe15..4ace2d8090c 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -426,23 +426,26 @@ __xsc3_setup:
orr r0, r0, #(1 << 10) @ enable L2 for LLR cache
#endif
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
+
+ adr r5, xsc3_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, #0x0002 @ .... .... .... ..A.
- orr r0, r0, #0x0005 @ .... .... .... .C.M
+ bic r0, r0, r5 @ .... .... .... ..A.
+ orr r0, r0, r6 @ .... .... .... .C.M
#if BTB_ENABLE
- bic r0, r0, #0x0200 @ .... ..R. .... ....
- orr r0, r0, #0x3900 @ ..VI Z..S .... ....
-#else
- bic r0, r0, #0x0a00 @ .... Z.R. .... ....
- orr r0, r0, #0x3100 @ ..VI ...S .... ....
+ orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
#endif
#if L2_CACHE_ENABLE
- orr r0, r0, #0x4000000 @ L2 enable
+ orr r0, r0, #0x04000000 @ L2 enable
#endif
mov pc, lr
.size __xsc3_setup, . - __xsc3_setup
+ .type xsc3_crval, #object
+xsc3_crval:
+ crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+
__INITDATA
/*
@@ -487,7 +490,14 @@ cpu_xsc3_name:
__xsc3_proc_info:
.long 0x69056000
.long 0xffffe000
- .long 0x00000c0e
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xsc3_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 29bcc4dd651..521538671f4 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -138,17 +138,23 @@ ENTRY(cpu_xscale_proc_fin)
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
+ *
+ * Beware PXA270 erratum E7.
*/
.align 5
ENTRY(cpu_xscale_reset)
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
+ mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB
+ mcr p15, 0, r1, c8, c5, 0 @ invalidate I-TLB
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x0086 @ ........B....CA.
bic r1, r1, #0x3900 @ ..VIZ..S........
+ sub pc, pc, #4 @ flush pipeline
+ @ *** cache line aligned ***
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
bic r1, r1, #0x0001 @ ...............M
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
@ CAUTION: MMU turned off from this point. We count on the pipeline
@ already containing those two last instructions to survive.
@@ -475,11 +481,12 @@ __xscale_setup:
orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
orr r0, r0, #1 << 13 @ Its undefined whether this
mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+
+ adr r5, xscale_crval
+ ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- ldr r5, xscale_cr1_clear
bic r0, r0, r5
- ldr r5, xscale_cr1_set
- orr r0, r0, r5
+ orr r0, r0, r6
mov pc, lr
.size __xscale_setup, . - __xscale_setup
@@ -489,12 +496,9 @@ __xscale_setup:
* ..11 1.01 .... .101
*
*/
- .type xscale_cr1_clear, #object
- .type xscale_cr1_set, #object
-xscale_cr1_clear:
- .word 0x3b07
-xscale_cr1_set:
- .word 0x3905
+ .type xscale_crval, #object
+xscale_crval:
+ crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
__INITDATA
@@ -595,6 +599,9 @@ __80200_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -615,6 +622,9 @@ __8032x_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -635,6 +645,9 @@ __8033x_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -655,6 +668,9 @@ __pxa250_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -675,6 +691,9 @@ __pxa210_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -695,6 +714,9 @@ __ixp2400_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -715,6 +737,9 @@ __ixp2800_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -735,6 +760,9 @@ __ixp42x_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -750,7 +778,14 @@ __ixp42x_proc_info:
__ixp46x_proc_info:
.long 0x69054200
.long 0xffffff00
- .long 0x00000c0e
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -771,6 +806,9 @@ __pxa255_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
@@ -791,6 +829,9 @@ __pxa270_proc_info:
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ec49495e651..ec752e16d61 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -91,7 +91,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX
help
Select this option if you want to use OMAP Dual-Mode timers.
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c520e9dcdd8..7f45c7c3e67 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -27,9 +27,9 @@
#include <asm/arch/clock.h>
-LIST_HEAD(clocks);
+static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
-DEFINE_SPINLOCK(clockfw_lock);
+static DEFINE_SPINLOCK(clockfw_lock);
static struct clk_functions *arch_clock;
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 98edc9fdd6d..a0c71dca237 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -25,6 +25,14 @@
#include <asm/io.h>
#include <asm/system.h>
+#define VERY_HI_RATE 900000000
+
+#ifdef CONFIG_ARCH_OMAP1
+#define MPU_CLK "mpu"
+#else
+#define MPU_CLK "virt_prcm_set"
+#endif
+
/* TODO: Add support for SDRAM timing changes */
int omap_verify_speed(struct cpufreq_policy *policy)
@@ -36,7 +44,7 @@ int omap_verify_speed(struct cpufreq_policy *policy)
cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
policy->cpuinfo.max_freq);
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
@@ -56,7 +64,7 @@ unsigned int omap_getspeed(unsigned int cpu)
if (cpu)
return 0;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return 0;
rate = clk_get_rate(mpu_clk) / 1000;
@@ -73,7 +81,7 @@ static int omap_target(struct cpufreq_policy *policy,
struct cpufreq_freqs freqs;
int ret = 0;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -93,7 +101,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
struct clk * mpu_clk;
- mpu_clk = clk_get(NULL, "mpu");
+ mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -102,7 +110,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
policy->cur = policy->min = policy->max = omap_getspeed(0);
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
- policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000;
+ policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
clk_put(mpu_clk);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ca486c9f36b..1812f237d12 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -104,7 +104,7 @@ static void omap_init_kp(void)
omap_cfg_reg(E20_1610_KBR3);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
- } else if (machine_is_omap_perseus2()) {
+ } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
omap_cfg_reg(E2_730_KBR0);
omap_cfg_reg(J7_730_KBR1);
omap_cfg_reg(E1_730_KBR2);
@@ -161,8 +161,8 @@ static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC1_BASE),
- .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+ .start = OMAP_MMC1_BASE,
+ .end = OMAP_MMC1_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
@@ -190,8 +190,8 @@ static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC2_BASE),
- .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+ .start = OMAP_MMC2_BASE,
+ .end = OMAP_MMC2_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 5dac4230360..c5d0214ef19 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -43,6 +43,7 @@
#define OMAP_DMA_ACTIVE 0x01
#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -166,18 +167,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
if (cpu_is_omap24xx() && dma_trigger) {
u32 val = OMAP_DMA_CCR_REG(lch);
+ val &= ~(3 << 19);
if (dma_trigger > 63)
val |= 1 << 20;
if (dma_trigger > 31)
val |= 1 << 19;
+ val &= ~(0x1f);
val |= (dma_trigger & 0x1f);
if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
if (sync_mode & OMAP_DMA_SYNC_BLOCK)
val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
if (src_or_dst_synch)
val |= 1 << 24; /* source synch */
@@ -286,22 +293,39 @@ void omap_set_dma_src_data_pack(int lch, int enable)
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- /* not supported by current hardware
+ if (cpu_is_omap24xx()) {
+ burst = 0x2;
+ break;
+ }
+ /* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
BUG();
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
}
/* Note that dest_port is only for OMAP1 */
@@ -348,30 +372,49 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
+ unsigned int burst = 0;
OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+ if (cpu_is_omap24xx())
+ burst = 0x2;
+ else
+ burst = 0x3;
break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_is_omap24xx()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
+ OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
}
static inline void omap_enable_channel_irq(int lch)
{
u32 status;
- /* Read CSR to make sure it's cleared. */
- status = OMAP_DMA_CSR_REG(lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = OMAP_DMA_CSR_REG(lch);
+ else if (cpu_is_omap24xx())
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
/* Enable some nice interrupts. */
OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -470,11 +513,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
- OMAP_DMA_BLOCK_IRQ;
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_is_omap24xx())
- chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_is_omap24xx())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
if (cpu_is_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -494,7 +539,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(free_ch) = 0x0;
+ OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
}
@@ -534,7 +579,7 @@ void omap_free_dma(int lch)
omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
/* Clear the CSR register and IRQ status register */
- OMAP_DMA_CSR_REG(lch) = 0x0;
+ OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
val |= 1 << lch;
@@ -798,7 +843,7 @@ static int omap1_dma_handle_ch(int ch)
"%d (CSR %04x)\n", ch, csr);
return 0;
}
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -846,20 +891,21 @@ static int omap2_dma_handle_ch(int ch)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1))
return 0;
- /* REVISIT: According to 24xx TRM, there's no TOUT_IE */
- if (unlikely(status & OMAP_DMA_TOUT_IRQ))
- printk(KERN_INFO "DMA timeout with device %d\n",
- dma_chan[ch].dev_id);
if (unlikely(status & OMAP_DMA_DROP_IRQ))
printk(KERN_INFO
"DMA synchronization event drop occurred with device "
"%d\n", dma_chan[ch].dev_id);
-
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
- OMAP_DMA_CSR_REG(ch) = 0x20;
+ OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
/* ch in this function is from 0-31 while in register it is 1-32 */
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index eba3cb52ad8..50524436de6 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -4,7 +4,8 @@
* OMAP Dual-Mode Timers
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -26,15 +27,17 @@
*/
#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/arch/dmtimer.h>
#include <asm/io.h>
#include <asm/arch/irqs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-#define OMAP_TIMER_COUNT 8
+/* register offsets */
#define OMAP_TIMER_ID_REG 0x00
#define OMAP_TIMER_OCP_CFG_REG 0x10
#define OMAP_TIMER_SYS_STAT_REG 0x14
@@ -50,52 +53,196 @@
#define OMAP_TIMER_CAPTURE_REG 0x3c
#define OMAP_TIMER_IF_CTRL_REG 0x40
+/* timer control reg bits */
+#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
+#define OMAP_TIMER_CTRL_PT (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
+#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
+#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */
+#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+
+struct omap_dm_timer {
+ unsigned long phys_base;
+ int irq;
+#ifdef CONFIG_ARCH_OMAP2
+ struct clk *iclk, *fclk;
+#endif
+ void __iomem *io_base;
+ unsigned reserved:1;
+};
-static struct dmtimer_info_struct {
- struct list_head unused_timers;
- struct list_head reserved_timers;
-} dm_timer_info;
+#ifdef CONFIG_ARCH_OMAP1
static struct omap_dm_timer dm_timers[] = {
- { .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
- { .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
- { .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
- { .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
- { .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
- { .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
- { .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
- { .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
- { .base=0x0 },
+ { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
+ { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
+ { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
+ { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
+ { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
+ { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
+ { .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
+ { .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
};
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer dm_timers[] = {
+ { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
+ { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
+ { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
+ { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
+ { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
+ { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
+ { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
+ { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
+ { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
+ { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
+};
+
+static const char *dm_source_names[] = {
+ "sys_ck",
+ "func_32k_ck",
+ "alt_ck"
+};
+static struct clk *dm_source_clocks[3];
+
+#else
+
+#error OMAP architecture not supported!
+
+#endif
+
+static const int dm_timer_count = ARRAY_SIZE(dm_timers);
static spinlock_t dm_timer_lock;
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+{
+ return readl(timer->io_base + reg);
+}
-inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
{
- omap_writel(value, timer->base + reg);
+ writel(value, timer->io_base + reg);
while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
;
}
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
- return omap_readl(timer->base + reg);
+ int c;
+
+ c = 0;
+ while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ c++;
+ if (c > 100000) {
+ printk(KERN_ERR "Timer failed to reset\n");
+ return;
+ }
+ }
}
-int omap_dm_timers_active(void)
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+ u32 l;
+
+ if (timer != &dm_timers[0]) {
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+ omap_dm_timer_wait_for_reset(timer);
+ }
+ omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+
+ /* Set to smart-idle mode */
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
+ l |= 0x02 << 3;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+}
+
+static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+{
+#ifdef CONFIG_ARCH_OMAP2
+ clk_enable(timer->iclk);
+ clk_enable(timer->fclk);
+#endif
+ omap_dm_timer_reset(timer);
+}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ for (i = 0; i < dm_timer_count; i++) {
+ if (dm_timers[i].reserved)
+ continue;
+
+ timer = &dm_timers[i];
+ timer->reserved = 1;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ if (timer != NULL)
+ omap_dm_timer_prepare(timer);
+
+ return timer;
+}
+
+struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
struct omap_dm_timer *timer;
+ unsigned long flags;
- for (timer = &dm_timers[0]; timer->base; ++timer)
- if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
- OMAP_TIMER_CTRL_ST)
- return 1;
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+ printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
+ __FILE__, __LINE__, __FUNCTION__, id);
+ dump_stack();
+ return NULL;
+ }
- return 0;
+ timer = &dm_timers[id-1];
+ timer->reserved = 1;
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ omap_dm_timer_prepare(timer);
+
+ return timer;
}
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_reset(timer);
+#ifdef CONFIG_ARCH_OMAP2
+ clk_disable(timer->iclk);
+ clk_disable(timer->fclk);
+#endif
+ WARN_ON(!timer->reserved);
+ timer->reserved = 0;
+}
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
+{
+ return timer->irq;
+}
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+ BUG();
+}
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
@@ -103,184 +250,229 @@ int omap_dm_timers_active(void)
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int n;
+ int i;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (n = 0; dm_timers[n].base; ++n)
- if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)&
- OMAP_TIMER_CTRL_ST) {
- if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0)
+ for (i = 0; i < dm_timer_count; i++) {
+ u32 l;
+
+ l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ }
return inputmask;
}
+#elif defined(CONFIG_ARCH_OMAP2)
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- int n = (timer - dm_timers) << 1;
- u32 l;
+ return timer->fclk;
+}
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+ BUG();
}
+#endif
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
{
- /* Reset and set posted mode */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
- omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
-
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+ u32 l;
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (!(l & OMAP_TIMER_CTRL_ST)) {
+ l |= OMAP_TIMER_CTRL_ST;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ }
+}
-struct omap_dm_timer * omap_dm_timer_request(void)
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
{
- struct omap_dm_timer *timer = NULL;
- unsigned long flags;
+ u32 l;
- spin_lock_irqsave(&dm_timer_lock, flags);
- if (!list_empty(&dm_timer_info.unused_timers)) {
- timer = (struct omap_dm_timer *)
- dm_timer_info.unused_timers.next;
- list_move_tail((struct list_head *)timer,
- &dm_timer_info.reserved_timers);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
- spin_unlock_irqrestore(&dm_timer_lock, flags);
-
- return timer;
}
+#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
- unsigned long flags;
-
- omap_dm_timer_reset(timer);
+ int n = (timer - dm_timers) << 1;
+ u32 l;
- spin_lock_irqsave(&dm_timer_lock, flags);
- list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
- spin_unlock_irqrestore(&dm_timer_lock, flags);
+ l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l |= source << n;
+ omap_writel(l, MOD_CONF_CTRL_1);
}
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
- unsigned int value)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
-}
+#else
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
- return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
-}
+ if (source < 0 || source >= 3)
+ return;
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+ clk_disable(timer->fclk);
+ clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ clk_enable(timer->fclk);
+
+ /* When the functional clock disappears, too quick writes seem to
+ * cause an abort. */
+ __delay(15000);
}
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
+#endif
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+ unsigned int load)
{
u32 l;
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_AR;
+ if (autoreload)
+ l |= OMAP_TIMER_CTRL_AR;
+ else
+ l &= ~OMAP_TIMER_CTRL_AR;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
-{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
-}
-
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+ unsigned int match)
{
u32 l;
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= value & 0x3;
+ if (enable)
+ l |= OMAP_TIMER_CTRL_CE;
+ else
+ l &= ~OMAP_TIMER_CTRL_CE;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
}
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+ int toggle, int trigger)
{
u32 l;
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_ST;
+ l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+ OMAP_TIMER_CTRL_PT | (0x03 << 10));
+ if (def_on)
+ l |= OMAP_TIMER_CTRL_SCPWM;
+ if (toggle)
+ l |= OMAP_TIMER_CTRL_PT;
+ l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
u32 l;
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l &= ~0x1;
+ l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+ if (prescaler >= 0x00 && prescaler <= 0x07) {
+ l |= OMAP_TIMER_CTRL_PRE;
+ l |= prescaler << 2;
+ }
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+ unsigned int value)
{
- return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
}
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+ return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
}
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
}
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+ return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
}
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
- u32 l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- l |= OMAP_TIMER_CTRL_CE;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
}
+int omap_dm_timers_active(void)
+{
+ int i;
+
+ for (i = 0; i < dm_timer_count; i++) {
+ struct omap_dm_timer *timer;
+
+ timer = &dm_timers[i];
+ if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+ OMAP_TIMER_CTRL_ST)
+ return 1;
+ }
+ return 0;
+}
-static inline void __dm_timer_init(void)
+int omap_dm_timer_init(void)
{
struct omap_dm_timer *timer;
+ int i;
+
+ if (!(cpu_is_omap16xx() || cpu_is_omap24xx()))
+ return -ENODEV;
spin_lock_init(&dm_timer_lock);
- INIT_LIST_HEAD(&dm_timer_info.unused_timers);
- INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
-
- timer = &dm_timers[0];
- while (timer->base) {
- list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
- omap_dm_timer_reset(timer);
- timer++;
+#ifdef CONFIG_ARCH_OMAP2
+ for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) {
+ dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
+ BUG_ON(dm_source_clocks[i] == NULL);
+ }
+#endif
+
+ for (i = 0; i < dm_timer_count; i++) {
+#ifdef CONFIG_ARCH_OMAP2
+ char clk_name[16];
+#endif
+
+ timer = &dm_timers[i];
+ timer->io_base = (void __iomem *) io_p2v(timer->phys_base);
+#ifdef CONFIG_ARCH_OMAP2
+ sprintf(clk_name, "gpt%d_ick", i + 1);
+ timer->iclk = clk_get(NULL, clk_name);
+ sprintf(clk_name, "gpt%d_fck", i + 1);
+ timer->fclk = clk_get(NULL, clk_name);
+#endif
}
-}
-static int __init omap_dm_timer_init(void)
-{
- if (cpu_is_omap16xx())
- __dm_timer_init();
return 0;
}
-
-arch_initcall(omap_dm_timer_init);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 418b88fbea8..ae08eeec7aa 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -536,6 +536,49 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
}
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+ void __iomem *reg = bank->base;
+ int inv = 0;
+ u32 l;
+ u32 mask;
+
+ switch (bank->method) {
+ case METHOD_MPUIO:
+ reg += OMAP_MPUIO_GPIO_MASKIT;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1510:
+ reg += OMAP1510_GPIO_INT_MASK;
+ mask = 0xffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_1610:
+ reg += OMAP1610_GPIO_IRQENABLE1;
+ mask = 0xffff;
+ break;
+ case METHOD_GPIO_730:
+ reg += OMAP730_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+ case METHOD_GPIO_24XX:
+ reg += OMAP24XX_GPIO_IRQENABLE1;
+ mask = 0xffffffff;
+ break;
+ default:
+ BUG();
+ return 0;
+ }
+
+ l = __raw_readl(reg);
+ if (inv)
+ l = ~l;
+ l &= mask;
+ return l;
+}
+
static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
{
void __iomem *reg = bank->base;
@@ -735,6 +778,8 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
u32 isr;
unsigned int gpio_irq;
struct gpio_bank *bank;
+ u32 retrigger = 0;
+ int unmasked = 0;
desc->chip->ack(irq);
@@ -759,18 +804,22 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
#endif
while(1) {
u32 isr_saved, level_mask = 0;
+ u32 enabled;
- isr_saved = isr = __raw_readl(isr_reg);
+ enabled = _get_gpio_irqbank_mask(bank);
+ isr_saved = isr = __raw_readl(isr_reg) & enabled;
if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
isr &= 0x0000ffff;
- if (cpu_is_omap24xx())
+ if (cpu_is_omap24xx()) {
level_mask =
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT0) |
__raw_readl(bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
+ level_mask &= enabled;
+ }
/* clear edge sensitive interrupts before handler(s) are
called so that we don't miss any interrupt occurred while
@@ -781,19 +830,54 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
/* if there is only edge sensitive GPIO pin interrupts
configured, we could unmask GPIO bank interrupt immediately */
- if (!level_mask)
+ if (!level_mask && !unmasked) {
+ unmasked = 1;
desc->chip->unmask(irq);
+ }
+ isr |= retrigger;
+ retrigger = 0;
if (!isr)
break;
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
struct irqdesc *d;
+ int irq_mask;
if (!(isr & 1))
continue;
d = irq_desc + gpio_irq;
+ /* Don't run the handler if it's already running
+ * or was disabled lazely.
+ */
+ if (unlikely((d->disable_depth || d->running))) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ /* The unmasking will be done by
+ * enable_irq in case it is disabled or
+ * after returning from the handler if
+ * it's already running.
+ */
+ _enable_gpio_irqbank(bank, irq_mask, 0);
+ if (!d->disable_depth) {
+ /* Level triggered interrupts
+ * won't ever be reentered
+ */
+ BUG_ON(level_mask & irq_mask);
+ d->pending = 1;
+ }
+ continue;
+ }
+ d->running = 1;
desc_handle_irq(gpio_irq, d, regs);
+ d->running = 0;
+ if (unlikely(d->pending && !d->disable_depth)) {
+ irq_mask = 1 <<
+ (gpio_irq - bank->virtual_irq_start);
+ d->pending = 0;
+ _enable_gpio_irqbank(bank, irq_mask, 1);
+ retrigger |= irq_mask;
+ }
}
if (cpu_is_omap24xx()) {
@@ -803,13 +887,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
}
- /* if bank has any level sensitive GPIO pin interrupt
- configured, we must unmask the bank interrupt only after
- handler(s) are executed in order to avoid spurious bank
- interrupt */
- if (level_mask)
- desc->chip->unmask(irq);
}
+ /* if bank has any level sensitive GPIO pin interrupt
+ configured, we must unmask the bank interrupt only after
+ handler(s) are executed in order to avoid spurious bank
+ interrupt */
+ if (!unmasked)
+ desc->chip->unmask(irq);
+
}
static void gpio_ack_irq(unsigned int irq)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 72ce52ce815..e75718301b0 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -157,14 +157,12 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
{ /* .length gets filled in at runtime */
.virtual = OMAP1_SRAM_VA,
.pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_DEVICE
+ .type = MT_MEMORY
}
};
/*
- * In order to use last 2kB of SRAM on 1611b, we must round the size
- * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
- * clock init needs SRAM early.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
void __init omap_map_sram(void)
{
@@ -184,8 +182,7 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
- omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
- omap_sram_io_desc[0].length *= PAGE_SIZE;
+ omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 053c18132ef..ddf4360dea7 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -7,6 +7,7 @@
* Partial timer rewrite and additional dynamic tick timer support by
* Tony Lindgen <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
*
* MPU timer code based on the older MPU timer code for OMAP
* Copyright (C) 2000 RidgeRun, Inc.
@@ -49,6 +50,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <asm/arch/dmtimer.h>
struct sys_timer omap_timer;
@@ -78,18 +80,6 @@ struct sys_timer omap_timer;
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
-/* 24xx specific defines */
-#define OMAP2_GP_TIMER_BASE 0x48028000
-#define CM_CLKSEL_WKUP 0x48008440
-#define GP_TIMER_TIDR 0x00
-#define GP_TIMER_TISR 0x18
-#define GP_TIMER_TIER 0x1c
-#define GP_TIMER_TCLR 0x24
-#define GP_TIMER_TCRR 0x28
-#define GP_TIMER_TLDR 0x2c
-#define GP_TIMER_TTGR 0x30
-#define GP_TIMER_TSICR 0x40
-
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
/*
@@ -101,54 +91,62 @@ struct sys_timer omap_timer;
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
+#if defined(CONFIG_ARCH_OMAP1)
+
static inline void omap_32k_timer_write(int val, int reg)
{
- if (cpu_class_is_omap1())
- omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
-
- if (cpu_is_omap24xx())
- omap_writel(val, OMAP2_GP_TIMER_BASE + reg);
+ omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
}
static inline unsigned long omap_32k_timer_read(int reg)
{
- if (cpu_class_is_omap1())
- return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+ return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+}
- if (cpu_is_omap24xx())
- return omap_readl(OMAP2_GP_TIMER_BASE + reg);
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+ omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+ omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
}
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
+static inline void omap_32k_timer_stop(void)
{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
+ omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
}
+#define omap_32k_timer_ack_irq()
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer *gptimer;
+
static inline void omap_32k_timer_start(unsigned long load_val)
{
- if (cpu_class_is_omap1()) {
- omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
- omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
- }
-
- if (cpu_is_omap24xx()) {
- omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR);
- omap_32k_timer_write((1 << 1), GP_TIMER_TIER);
- omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR);
- }
+ omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+ omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+ omap_dm_timer_start(gptimer);
}
static inline void omap_32k_timer_stop(void)
{
- if (cpu_class_is_omap1())
- omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+ omap_dm_timer_stop(gptimer);
+}
- if (cpu_is_omap24xx())
- omap_32k_timer_write(0x0, GP_TIMER_TCLR);
+static inline void omap_32k_timer_ack_irq(void)
+{
+ u32 status = omap_dm_timer_read_status(gptimer);
+ omap_dm_timer_write_status(gptimer, status);
+}
+
+#endif
+
+/*
+ * The 32KHz synchronized timer is an additional timer on 16xx.
+ * It is always running.
+ */
+static inline unsigned long omap_32k_sync_timer_read(void)
+{
+ return omap_readl(TIMER_32K_SYNCHRONIZED);
}
/*
@@ -202,11 +200,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
write_seqlock_irqsave(&xtime_lock, flags);
- if (cpu_is_omap24xx()) {
- u32 status = omap_32k_timer_read(GP_TIMER_TISR);
- omap_32k_timer_write(status, GP_TIMER_TISR);
- }
-
+ omap_32k_timer_ack_irq();
now = omap_32k_sync_timer_read();
while ((signed long)(now - omap_32k_last_tick)
@@ -268,9 +262,6 @@ static struct irqaction omap_32k_timer_irq = {
.handler = omap_32k_timer_interrupt,
};
-static struct clk * gpt1_ick;
-static struct clk * gpt1_fck;
-
static __init void omap_init_32k_timer(void)
{
#ifdef CONFIG_NO_IDLE_HZ
@@ -279,32 +270,22 @@ static __init void omap_init_32k_timer(void)
if (cpu_class_is_omap1())
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- if (cpu_is_omap24xx())
- setup_irq(37, &omap_32k_timer_irq);
omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
+#ifdef CONFIG_ARCH_OMAP2
/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
if (cpu_is_omap24xx()) {
- omap_32k_timer_write(0, GP_TIMER_TCLR);
- omap_writel(0, CM_CLKSEL_WKUP); /* 32KHz clock source */
-
- gpt1_ick = clk_get(NULL, "gpt1_ick");
- if (IS_ERR(gpt1_ick))
- printk(KERN_ERR "Could not get gpt1_ick\n");
- else
- clk_enable(gpt1_ick);
-
- gpt1_fck = clk_get(NULL, "gpt1_fck");
- if (IS_ERR(gpt1_fck))
- printk(KERN_ERR "Could not get gpt1_fck\n");
- else
- clk_enable(gpt1_fck);
-
- mdelay(100); /* Wait for clocks to stabilize */
-
- omap_32k_timer_write(0x7, GP_TIMER_TISR);
+ gptimer = omap_dm_timer_request_specific(1);
+ BUG_ON(gptimer == NULL);
+
+ omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
+ omap_dm_timer_set_int_enable(gptimer,
+ OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
+ OMAP_TIMER_INT_MATCH);
}
+#endif
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
}
@@ -316,6 +297,9 @@ static __init void omap_init_32k_timer(void)
*/
static void __init omap_timer_init(void)
{
+#ifdef CONFIG_OMAP_DM_TIMER
+ omap_dm_timer_init();
+#endif
omap_init_32k_timer();
}