ARM: spear: make clock driver independent of headers

Device drivers should not access MMIO registers through hardcoded
platform specific address constants. Instead, we can pass the
MMIO token to the spear clock driver in the initialization routine
to contain that knowledge in the platform code itself.

Ideally, the clock driver would use of_iomap() or similar to
get the address, and that can be used later, but for now, this
is the minimal change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

8 files changed, 31 insertions, 36 deletions

diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index af47d9b0d83..8ba7e75b648 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -29,10 +29,11 @@ extern struct dw_dma_slave nand_write_dma_priv;
 bool dw_dma_filter(struct dma_chan *chan, void *slave);
 
 void __init spear_setup_of_timer(void);
-void __init spear3xx_clk_init(void);
+void __init spear3xx_clk_init(void __iomem *misc_base,
+			      void __iomem *soc_config_base);
 void __init spear3xx_map_io(void);
 void __init spear3xx_dt_init_irq(void);
-void __init spear6xx_clk_init(void);
+void __init spear6xx_clk_init(void __iomem *misc_base);
 void __init spear13xx_map_io(void);
 void __init spear13xx_l2x0_init(void);
 
@@ -44,15 +45,15 @@ void __cpuinit spear13xx_cpu_die(unsigned int cpu);
 extern struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
-void __init spear1310_clk_init(void);
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
 #else
-static inline void spear1310_clk_init(void) {}
+static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {}
 #endif
 
 #ifdef CONFIG_MACH_SPEAR1340
-void __init spear1340_clk_init(void);
+void __init spear1340_clk_init(void __iomem *misc_base);
 #else
-static inline void spear1340_clk_init(void) {}
+static inline void spear1340_clk_init(void __iomem *misc_base) {}
 #endif
 
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h
index 075812c4ca1..935639ce59b 100644
--- a/arch/arm/mach-spear/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear/include/mach/misc_regs.h
@@ -16,7 +16,7 @@
 
 #include <mach/spear.h>
 
-#define MISC_BASE		IOMEM(VA_SPEAR_ICM3_MISC_REG_BASE)
+#define MISC_BASE		(VA_SPEAR_ICM3_MISC_REG_BASE)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 2198ab96df9..374ddc393df 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -19,23 +19,23 @@
 
 /* ICM1 - Low speed connection */
 #define SPEAR_ICM1_2_BASE		UL(0xD0000000)
-#define VA_SPEAR_ICM1_2_BASE		UL(0xFD000000)
+#define VA_SPEAR_ICM1_2_BASE		IOMEM(0xFD000000)
 #define SPEAR_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR_ICM1_UART_BASE		(VA_SPEAR_ICM1_2_BASE | SPEAR_ICM1_UART_BASE)
+#define VA_SPEAR_ICM1_UART_BASE		(VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
 
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR_ICM3_ML1_2_BASE		UL(0xF0000000)
-#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		IOMEM(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
 #define SPEAR_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define VA_SPEAR_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR_ICM3_SMI_CTRL_BASE	IOMEM(0xFC000000)
 #define SPEAR_ICM3_DMA_BASE		UL(0xFC400000)
 #define SPEAR_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR_ICM3_SYS_CTRL_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE | SPEAR_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR_ICM3_SYS_CTRL_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE)
 #define SPEAR_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR_ICM3_MISC_REG_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE | SPEAR_ICM3_MISC_REG_BASE)
+#define VA_SPEAR_ICM3_MISC_REG_BASE	(VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR_ICM1_UART_BASE
@@ -44,20 +44,11 @@
 /* Sysctl base for spear platform */
 #define SPEAR_SYS_CTRL_BASE		SPEAR_ICM3_SYS_CTRL_BASE
 #define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR_ICM3_SYS_CTRL_BASE
+#endif /* SPEAR3xx || SPEAR6XX */
 
 /* SPEAr320 Macros */
 #define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-#define VA_SPEAR320_SOC_CONFIG_BASE	UL(0xFE000000)
-#define SPEAR320_CONTROL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
-#define SPEAR320_EXT_CTRL_REG		IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
-	#define SPEAR320_UARTX_PCLK_MASK		0x1
-	#define SPEAR320_UART2_PCLK_SHIFT		8
-	#define SPEAR320_UART3_PCLK_SHIFT		9
-	#define SPEAR320_UART4_PCLK_SHIFT		10
-	#define SPEAR320_UART5_PCLK_SHIFT		11
-	#define SPEAR320_UART6_PCLK_SHIFT		12
-	#define SPEAR320_RS485_PCLK_SHIFT		13
-#endif /* SPEAR3xx || SPEAR6XX */
+#define VA_SPEAR320_SOC_CONFIG_BASE	IOMEM(0xFE000000)
 
 #ifdef CONFIG_ARCH_SPEAR13XX
 
@@ -79,6 +70,9 @@
 #define A9SM_AND_MPMC_BASE			UL(0xEC000000)
 #define VA_A9SM_AND_MPMC_BASE			IOMEM(0xFC000000)
 
+#define SPEAR1310_RAS_BASE			UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
+
 /* A9SM peripheral offsets */
 #define A9SM_PERIP_BASE				UL(0xEC800000)
 #define VA_A9SM_PERIP_BASE			IOMEM(0xFC800000)
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index fe868b20b46..ed3b5c287a7 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -30,8 +30,6 @@
 
 #define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
 #define VA_SPEAR1310_RAS_GRP1_BASE		UL(0xFA000000)
-#define SPEAR1310_RAS_BASE			UL(0xD8400000)
-#define VA_SPEAR1310_RAS_BASE			IOMEM(UL(0xFA400000))
 
 static struct arasan_cf_pdata cf_pdata = {
 	.cf_if_clk = CF_IF_CLK_166M,
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 6f62dd59daf..1b97e862347 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -146,9 +146,9 @@ void __init spear13xx_map_io(void)
 static void __init spear13xx_clk_init(void)
 {
 	if (of_machine_is_compatible("st,spear1310"))
-		spear1310_clk_init();
+		spear1310_clk_init(VA_MISC_BASE, VA_SPEAR1310_RAS_BASE);
 	else if (of_machine_is_compatible("st,spear1340"))
-		spear1340_clk_init();
+		spear1340_clk_init(VA_MISC_BASE);
 	else
 		pr_err("%s: Unknown machine\n", __func__);
 }
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index b8a4bb5fcee..6eb3eec65f9 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -254,7 +254,7 @@ static const char * const spear320_dt_board_compat[] = {
 
 struct map_desc spear320_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR320_SOC_CONFIG_BASE,
+		.virtual	= (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE,
 		.pfn		= __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index be0c94d04d5..0227c97797c 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -21,6 +21,7 @@
 #include "pl080.h"
 #include "generic.h"
 #include <mach/spear.h>
+#include <mach/misc_regs.h>
 
 /* ssp device registration */
 struct pl022_ssp_controller pl022_plat_data = {
@@ -67,12 +68,12 @@ struct pl08x_platform_data pl080_plat_data = {
  */
 struct map_desc spear3xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR_ICM1_2_BASE,
+		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR_ICM3_SMI_CTRL_BASE,
+		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
@@ -90,7 +91,7 @@ void __init spear3xx_timer_init(void)
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
 
-	spear3xx_clk_init();
+	spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
 
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index 78e13597714..9b5ea254ed8 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -27,6 +27,7 @@
 #include "pl080.h"
 #include "generic.h"
 #include <mach/spear.h>
+#include <mach/misc_regs.h>
 
 /* dmac device registration */
 static struct pl08x_channel_data spear600_dma_info[] = {
@@ -350,17 +351,17 @@ struct pl08x_platform_data pl080_plat_data = {
  */
 struct map_desc spear6xx_io_desc[] __initdata = {
 	{
-		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.virtual	= (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
 		.length		= 2 * SZ_16M,
 		.type		= MT_DEVICE
 	},	{
-		.virtual	= VA_SPEAR_ICM1_2_BASE,
+		.virtual	= (unsigned long)VA_SPEAR_ICM1_2_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM1_2_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR_ICM3_SMI_CTRL_BASE,
+		.virtual	= (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
 		.length		= SZ_16M,
 		.type		= MT_DEVICE
@@ -378,7 +379,7 @@ void __init spear6xx_timer_init(void)
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
 
-	spear6xx_clk_init();
+	spear6xx_clk_init(MISC_BASE);
 
 	/* get the system timer clock */
 	gpt_clk = clk_get_sys("gpt0", NULL);