Merge tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP specific fbdev changes from Tomi Valkeinen:
 "I've got this pull request separate from the main fbdev pull request,
  as this contains a bunch of OMAP board file changes and thus could
  possibly be rejected in case of bad conflicts.

  The removal of the old display drivers depend on the board file
  changes, so Tony Lindgren suggested taking them together via fbdev
  tree.  These are in linux-next, and also Tony didn't see any conflicts
  with any of the branches he had, so they should go in clean.

   - Change the OMAP board files to use the new OMAP display drivers

   - Remove all the old drivers, and the related auxiliary code"

* tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: rename omap_dss_device's 'device' field to 'dst'
  OMAPDSS: rename omap_dss_device's 'output' to 'src'
  OMAPDSS: DSS: remove legacy dss bus support
  OMAPDSS: RFBI: remove code related to old panel model
  OMAPDSS: VENC: remove code related to old panel model
  OMAPDSS: SDI: remove code related to old panel model
  OMAPDSS: DSI: remove code related to old panel model
  OMAPDSS: HDMI: remove code related to old panel model
  OMAPDSS: DPI: remove code related to old panel model
  OMAPDSS: remove all old panel drivers
  OMAPDSS: DPI: change regulator handling
  OMAPDSS: SDI: change regulator handling
  OMAPDSS: fix DPI and SDI device ids
  OMAPDSS: remove omap_dss_device->channel field
  OMAPDSS: RFBI: Mark RFBI as broken
  ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
  ARM: OMAP: AM3517EVM: use new display drivers
  ARM: OMAP: Zoom: use new display drivers
  ARM: OMAP: Pandora: use new display drivers
  ARM: OMAP: OMAP3EVM: use new display drivers
  ...

20 files changed, 789 insertions, 563 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5465f564fdf..056b27aafbe 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -186,13 +186,11 @@ CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_TFP410=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
+CONFIG_DISPLAY_ENCODER_TFP410=m
+CONFIG_DISPLAY_ENCODER_TPD12S015=m
+CONFIG_DISPLAY_CONNECTOR_DVI=m
+CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_PANEL_DPI=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 244d8a5aa54..c711ad6ac06 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_flash_device,
-};
-
 /* LCD */
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
 #define SDP2430_LCD_PANEL_ENABLE_GPIO		154
 
-static struct panel_generic_dpi_data sdp2430_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 2,
-	.gpios			= {
-		SDP2430_LCD_PANEL_ENABLE_GPIO,
-		SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
-	},
+static const struct display_timing sdp2430_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device sdp2430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp2430_panel_data,
+static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &sdp2430_lcd_videomode,
+
+	.enable_gpio		= SDP2430_LCD_PANEL_ENABLE_GPIO,
+	.backlight_gpio		= SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
 };
 
-static struct omap_dss_device *sdp2430_dss_devices[] = {
-	&sdp2430_lcd_device,
+static struct platform_device sdp2430_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp2430_lcd_pdata,
 };
 
 static struct omap_dss_board_info sdp2430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
-	.devices	= sdp2430_dss_devices,
-	.default_device	= &sdp2430_lcd_device,
+	.default_display_name = "lcd",
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
 #if IS_ENABLED(CONFIG_SMC91X)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 23b004afa3f..d95d0ef1354 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void)
 
 }
 
-static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
-	.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
-	.ini_gpio = -1,
-	.mo_gpio = -1,
-	.lr_gpio = -1,
-	.ud_gpio = -1,
+static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.resb_gpio		= SDP3430_LCD_PANEL_ENABLE_GPIO,
+	.ini_gpio		= -1,
+	.mo_gpio		= -1,
+	.lr_gpio		= -1,
+	.ud_gpio		= -1,
+};
+
+static struct platform_device sdp3430_lcd_device = {
+	.name                   = "panel-sharp-ls037v7dw01",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_lcd_pdata,
 };
 
-static struct omap_dss_device sdp3430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp3430_lcd_data,
+static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct platform_device sdp3430_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_dvi_connector_pdata,
 };
 
-static struct omap_dss_device sdp3430_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device sdp3430_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device sdp3430_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tfp410_pdata,
 };
 
+static struct connector_atv_platform_data sdp3430_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
 
-static struct omap_dss_device *sdp3430_dss_devices[] = {
-	&sdp3430_lcd_device,
-	&sdp3430_dvi_device,
-	&sdp3430_tv_device,
+static struct platform_device sdp3430_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tv_pdata,
 };
 
 static struct omap_dss_board_info sdp3430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
-	.devices	= sdp3430_dss_devices,
-	.default_device	= &sdp3430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void)
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
+	platform_device_register(&sdp3430_lcd_device);
+	platform_device_register(&sdp3430_tfp410_device);
+	platform_device_register(&sdp3430_dvi_connector_device);
+	platform_device_register(&sdp3430_tv_connector_device);
+
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d63f14b534b..8cc2c9e9fb0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void)
 	return 0;
 }
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "sharp_lq",
-	.num_gpios		= 3,
-	.gpios			= {
-		LCD_PANEL_PWR,
-		LCD_PANEL_BKLIGHT_PWR,
-		LCD_PANEL_PWM,
-	},
+static const struct display_timing am3517_evm_lcd_videomode = {
+	.pixelclock	= { 0, 9000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 2, 0 },
+	.hsync_len = { 0, 42, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 3, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 11, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &am3517_evm_lcd_videomode,
+
+	.enable_gpio		= LCD_PANEL_PWR,
+	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
+};
+
+static struct platform_device am3517_evm_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_lcd_pdata,
 };
 
-static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines 	= 16,
+static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct omap_dss_device am3517_evm_tv_device = {
-	.type 			= OMAP_DISPLAY_TYPE_VENC,
-	.name 			= "tv",
-	.driver_name		= "venc",
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device am3517_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device am3517_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tfp410_pdata,
 };
 
-static struct omap_dss_device *am3517_evm_dss_devices[] = {
-	&am3517_evm_lcd_device,
-	&am3517_evm_tv_device,
-	&am3517_evm_dvi_device,
+static struct connector_atv_platform_data am3517_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device am3517_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info am3517_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
-	.devices	= am3517_evm_dss_devices,
-	.default_device	= &am3517_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
+static void __init am3517_evm_display_init(void)
+{
+	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
+
+	omap_display_init(&am3517_evm_dss_data);
+
+	platform_device_register(&am3517_evm_tfp410_device);
+	platform_device_register(&am3517_evm_dvi_connector_device);
+	platform_device_register(&am3517_evm_lcd_device);
+	platform_device_register(&am3517_evm_tv_connector_device);
+}
+
 /*
  * Board initialization
  */
@@ -295,7 +334,9 @@ static void __init am3517_evm_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
-	omap_display_init(&am3517_evm_dss_data);
+
+	am3517_evm_display_init();
+
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d4622ed2625..33d159e2386 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {}
 #define CM_T35_LCD_BL_GPIO 58
 #define CM_T35_DVI_EN_GPIO 54
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "toppoly_tdo35s",
-	.num_gpios		= 1,
-	.gpios			= {
-		CM_T35_LCD_BL_GPIO,
-	},
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 26000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 104, 0 },
+	.hback_porch = { 0, 8, 0 },
+	.hsync_len = { 0, 8, 0 },
+
+	.vactive = { 0, 640, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 2, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= CM_T35_LCD_BL_GPIO,
+};
+
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device cm_t35_lcd_device = {
-	.name			= "lcd",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 18,
+static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
-	.i2c_bus_num		= -1,
+static struct platform_device cm_t35_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_dvi_connector_pdata,
 };
 
-static struct omap_dss_device cm_t35_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = CM_T35_DVI_EN_GPIO,
 };
 
-static struct omap_dss_device cm_t35_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device cm_t35_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tfp410_pdata,
 };
 
-static struct omap_dss_device *cm_t35_dss_devices[] = {
-	&cm_t35_lcd_device,
-	&cm_t35_dvi_device,
-	&cm_t35_tv_device,
+static struct connector_atv_platform_data cm_t35_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device cm_t35_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tv_pdata,
 };
 
 static struct omap_dss_board_info cm_t35_dss_data = {
-	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
-	.devices	= cm_t35_dss_devices,
-	.default_device	= &cm_t35_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
@@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void)
 		pr_err("CM-T35: failed to register DSS device\n");
 		gpio_free(CM_T35_LCD_EN_GPIO);
 	}
+
+	platform_device_register(&cm_t35_tfp410_device);
+	platform_device_register(&cm_t35_dvi_connector_device);
+	platform_device_register(&cm_t35_lcd_device);
+	platform_device_register(&cm_t35_tv_connector_device);
 }
 
 static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index f1d91ba5d1a..cdc4fb9960a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
 	REGULATOR_SUPPLY("vcc", "spi2.0"),
 };
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "innolux_at070tn83",
-	/* gpios filled in code */
+static const struct display_timing devkit8000_lcd_videomode = {
+	.pixelclock	= { 0, 40000000, 0 },
+
+	.hactive = { 0, 800, 0 },
+	.hfront_porch = { 0, 1, 0 },
+	.hback_porch = { 0, 1, 0 },
+	.hsync_len = { 0, 48, 0 },
+
+	.vactive = { 0, 480, 0 },
+	.vfront_porch = { 0, 12, 0 },
+	.vback_porch = { 0, 25, 0 },
+	.vsync_len = { 0, 3, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device devkit8000_lcd_device = {
+static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
 	.name                   = "lcd",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &devkit8000_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= 1,
+static struct platform_device devkit8000_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_lcd_pdata,
 };
 
-static struct omap_dss_device devkit8000_dvi_device = {
+static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
 	.name                   = "dvi",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 1,
 };
 
-static struct omap_dss_device devkit8000_tv_device = {
-	.name                   = "tv",
-	.driver_name            = "venc",
-	.type                   = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device devkit8000_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_dvi_connector_pdata,
 };
 
+static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,	/* filled in code */
+};
 
-static struct omap_dss_device *devkit8000_dss_devices[] = {
-	&devkit8000_lcd_device,
-	&devkit8000_dvi_device,
-	&devkit8000_tv_device,
+static struct platform_device devkit8000_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data devkit8000_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device devkit8000_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tv_pdata,
 };
 
 static struct omap_dss_board_info devkit8000_dss_data = {
-	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
-	.devices = devkit8000_dss_devices,
-	.default_device = &devkit8000_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static uint32_t board_keymap[] = {
@@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	lcd_panel.num_gpios = 1;
-	lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
+	devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	dvi_panel.power_down_gpio = gpio + 7;
+	devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
 
 	return 0;
 }
@@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
+	&devkit8000_lcd_device,
+	&devkit8000_tfp410_device,
+	&devkit8000_dvi_connector_device,
+	&devkit8000_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 69c0acf5aa6..87e41a8b8d4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
-static struct platform_device *h4_devices[] __initdata = {
-	&h4_flash_device,
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 6250000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 15, 0 },
+	.hback_porch = { 0, 60, 0 },
+	.hsync_len = { 0, 15, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 1, 0 },
+	.vback_porch = { 0, 1, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data h4_panel_data = {
-	.name			= "h4",
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= -1,
 };
 
-static struct omap_dss_device h4_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &h4_panel_data,
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device *h4_dss_devices[] = {
-	&h4_lcd_device,
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_flash_device,
+	&cm_t35_lcd_device,
 };
 
 static struct omap_dss_board_info h4_dss_data = {
-	.num_devices	= ARRAY_SIZE(h4_dss_devices),
-	.devices	= h4_dss_devices,
-	.default_device	= &h4_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /* 2420 Sysboot setup (2430 is different) */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 87e65dde8e1..06dbb2d3d38 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -429,31 +429,39 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device igep2_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device omap3stalker_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 };
 
-static struct omap_dss_device *igep2_dss_devices[] = {
-	&igep2_dvi_device
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = IGEP2_GPIO_DVI_PUP,
+};
+
+static struct platform_device omap3stalker_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tfp410_pdata,
 };
 
 static struct omap_dss_board_info igep2_dss_data = {
-	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
-	.devices	= igep2_dss_devices,
-	.default_device	= &igep2_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
+	&omap3stalker_tfp410_device,
+	&omap3stalker_dvi_connector_device,
 };
 
 static int igep2_keymap[] = {
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 62e4f701b63..dd8da2c5399 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -184,45 +184,70 @@ static inline void __init ldp_init_smsc911x(void)
 #define LCD_PANEL_RESET_GPIO		55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct panel_generic_dpi_data ldp_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 4,
-	/* gpios filled in code */
+static const struct display_timing ldp_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device ldp_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &ldp_panel_data,
+static struct panel_dpi_platform_data ldp_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &ldp_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,	/* filled in code */
 };
 
-static struct omap_dss_device *ldp_dss_devices[] = {
-	&ldp_lcd_device,
+static struct platform_device ldp_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &ldp_lcd_pdata,
 };
 
 static struct omap_dss_board_info ldp_dss_data = {
-	.num_devices	= ARRAY_SIZE(ldp_dss_devices),
-	.devices	= ldp_dss_devices,
-	.default_device	= &ldp_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void __init ldp_display_init(void)
 {
-	ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
-	ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
+	int r;
+
+	static struct gpio gpios[] __initdata = {
+		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		return;
+	}
 
 	omap_display_init(&ldp_dss_data);
 }
 
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
-	ldp_panel_data.gpios[0] = gpio + 7;
-	ldp_panel_data.gpio_invert[0] = true;
+	/* LCD enable GPIO */
+	ldp_lcd_pdata.enable_gpio = gpio + 7;
 
-	ldp_panel_data.gpios[1] = gpio + 15;
-	ldp_panel_data.gpio_invert[1] = true;
+	/* Backlight enable GPIO */
+	ldp_lcd_pdata.backlight_gpio = gpio + 15;
 
 	return 0;
 }
@@ -322,6 +347,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 
 static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
+	&ldp_lcd_device,
 };
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1c6ae5f5bae..f26918467ef 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
 
 /* DSS */
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num = 3,
-	.power_down_gpio = -1,
+static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device beagle_dvi_device = {
-	.type = OMAP_DISPLAY_TYPE_DPI,
-	.name = "dvi",
-	.driver_name = "tfp410",
-	.data = &dvi_panel,
-	.phy.dpi.data_lines = 24,
+static struct platform_device beagle_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_dvi_connector_pdata,
 };
 
-static struct omap_dss_device beagle_tv_device = {
+static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device beagle_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data beagle_tv_pdata = {
 	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *beagle_dss_devices[] = {
-	&beagle_dvi_device,
-	&beagle_tv_device,
+static struct platform_device beagle_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tv_pdata,
 };
 
 static struct omap_dss_board_info beagle_dss_data = {
-	.num_devices = ARRAY_SIZE(beagle_dss_devices),
-	.devices = beagle_dss_devices,
-	.default_device = &beagle_dvi_device,
+	.default_display_name = "dvi",
 };
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+	beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
+
+	platform_device_register(&beagle_tfp410_device);
+	platform_device_register(&beagle_dvi_connector_device);
+	platform_device_register(&beagle_tv_connector_device);
 
 	/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
 	phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
@@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void)
 	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
 		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
+
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 52bdddd41e0..18143873346 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -166,14 +166,6 @@ static inline void __init omap3evm_init_smsc911x(void) { return; }
  */
 #define OMAP3EVM_DVI_PANEL_EN_GPIO	199
 
-static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
-	.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
-};
-
 #ifdef CONFIG_BROKEN
 static void __init omap3_evm_display_init(void)
 {
@@ -196,44 +188,65 @@ static void __init omap3_evm_display_init(void)
 }
 #endif
 
-static struct omap_dss_device omap3_evm_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &omap3_evm_lcd_data,
+static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.resb_gpio		= OMAP3EVM_LCD_PANEL_RESB,
+	.ini_gpio		= OMAP3EVM_LCD_PANEL_INI,
+	.mo_gpio		= OMAP3EVM_LCD_PANEL_QVGA,
+	.lr_gpio		= OMAP3EVM_LCD_PANEL_LR,
+	.ud_gpio		= OMAP3EVM_LCD_PANEL_UD,
+};
+
+static struct platform_device omap3_evm_lcd_device = {
+	.name                   = "panel-sharp-ls037v7dw01",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_lcd_pdata,
+};
+
+static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
+};
+
+static struct platform_device omap3_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_dvi_connector_pdata,
 };
 
-static struct omap_dss_device omap3_evm_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = OMAP3EVM_DVI_PANEL_EN_GPIO,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
-	.i2c_bus_num		= -1,
+static struct platform_device omap3_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_tfp410_pdata,
 };
 
-static struct omap_dss_device omap3_evm_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct connector_atv_platform_data omap3_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *omap3_evm_dss_devices[] = {
-	&omap3_evm_lcd_device,
-	&omap3_evm_tv_device,
-	&omap3_evm_dvi_device,
+static struct platform_device omap3_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info omap3_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
-	.devices	= omap3_evm_dss_devices,
-	.default_device	= &omap3_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
@@ -678,6 +691,10 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);
+	platform_device_register(&omap3_evm_lcd_device);
+	platform_device_register(&omap3_evm_tfp410_device);
+	platform_device_register(&omap3_evm_dvi_connector_device);
+	platform_device_register(&omap3_evm_tv_connector_device);
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index d2b455e7048..de1bc6bbe58 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = {
 	.rep		= 1,
 };
 
-static struct panel_tpo_td043_data lcd_data = {
-	.nreset_gpio		= 157,
-};
-
-static struct omap_dss_device pandora_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "tpo_td043mtea1_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device pandora_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct connector_atv_platform_data pandora_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *pandora_dss_devices[] = {
-	&pandora_lcd_device,
-	&pandora_tv_device,
+static struct platform_device pandora_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &pandora_tv_pdata,
 };
 
 static struct omap_dss_board_info pandora_dss_data = {
-	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
-	.devices	= pandora_dss_devices,
-	.default_device	= &pandora_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void pandora_wl1251_init_card(struct mmc_card *card)
@@ -348,7 +335,7 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "display0"),
+	REGULATOR_SUPPLY("vcc", "spi1.1"),
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
@@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
+static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+	.nreset_gpio		= 157,
+};
+
 static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	{
-		.modalias		= "tpo_td043mtea1_panel_spi",
+		.modalias		= "panel-tpo-td043mtea1",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_device,
+		.platform_data		= &pandora_lcd_pdata,
 	}
 };
 
@@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_keys_gpio,
 	&pandora_vwlan_device,
 	&pandora_backlight,
+	&pandora_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index d37e6b187ae..ba8342fef79 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void)
 {
 	return;
 }
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
+};
 
-static struct omap_dss_device omap3_stalker_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
-	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
+static struct platform_device omap3stalker_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= DSS_ENABLE_GPIO,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = DSS_ENABLE_GPIO,
 };
 
-static struct omap_dss_device omap3_stalker_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device omap3stalker_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data omap3stalker_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_tv_device,
-	&omap3_stalker_dvi_device,
+static struct platform_device omap3stalker_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tv_pdata,
 };
 
 static struct omap_dss_board_info omap3_stalker_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
-	.devices	= omap3_stalker_dss_devices,
-	.default_device	= &omap3_stalker_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
@@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = {
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
+	&omap3stalker_tfp410_device,
+	&omap3stalker_dvi_connector_device,
+	&omap3stalker_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5748b5d06c2..f6d38411191 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -72,6 +72,9 @@
 #define OVERO_SMSC911X2_CS     4
 #define OVERO_SMSC911X2_GPIO   65
 
+/* whether to register LCD35 instead of LCD43 */
+static bool overo_use_lcd35;
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
 #define OVERO_GPIO_LCD_EN 144
 #define OVERO_GPIO_LCD_BL 145
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= -1,
+static struct connector_atv_platform_data overo_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device overo_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tv_pdata,
 };
 
-static struct omap_dss_device overo_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+static const struct display_timing overo_lcd43_videomode = {
+	.pixelclock	= { 0, 9200000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 8, 0 },
+	.hback_porch = { 0, 4, 0 },
+	.hsync_len = { 0, 41, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 10, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data lcd43_panel = {
-	.name			= "samsung_lte430wq_f0c",
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct panel_dpi_platform_data overo_lcd43_pdata = {
+	.name                   = "lcd43",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &overo_lcd43_videomode,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
 };
 
-static struct omap_dss_device overo_lcd43_device = {
-	.name			= "lcd43",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd43_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_lcd43_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_lcd43_pdata,
 };
 
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct panel_generic_dpi_data lcd35_panel = {
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device overo_lcd35_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd35",
-	.driver_name		= "lgphilips_lb035q02_panel",
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd35_panel,
+static struct platform_device overo_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_dvi_connector_pdata,
 };
-#endif
 
-static struct omap_dss_device *overo_dss_devices[] = {
-	&overo_dvi_device,
-	&overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	&overo_lcd35_device,
-#endif
-	&overo_lcd43_device,
+static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device overo_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tfp410_pdata,
 };
 
 static struct omap_dss_board_info overo_dss_data = {
-	.num_devices	= ARRAY_SIZE(overo_dss_devices),
-	.devices	= overo_dss_devices,
-	.default_device	= &overo_dvi_device,
+	.default_display_name = "lcd43",
 };
 
+static void __init overo_display_init(void)
+{
+	omap_display_init(&overo_dss_data);
+
+	if (!overo_use_lcd35)
+		platform_device_register(&overo_lcd43_device);
+	platform_device_register(&overo_tfp410_device);
+	platform_device_register(&overo_dvi_connector_device);
+	platform_device_register(&overo_tv_connector_device);
+}
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
+static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
+	.name                   = "lcd35",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
+};
+
+/*
+ * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
+ * selection is done based on the overo_use_lcd35 field. If new SPI
+ * devices are added here, extra work is needed to make only the lgphilips panel
+ * affected by the overo_use_lcd35 field.
+ */
 static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
 	{
-		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.modalias		= "panel_lgphilips_lb035q02",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 500000,
 		.mode			= SPI_MODE_3,
+		.platform_data		= &overo_lcd35_pdata,
 	},
-#endif
 };
 
 static int __init overo_spi_init(void)
 {
 	overo_ads7846_init();
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
+
+	if (overo_use_lcd35) {
+		spi_register_board_info(overo_spi_board_info,
+				ARRAY_SIZE(overo_spi_board_info));
+	}
 	return 0;
 }
 
@@ -463,11 +499,13 @@ static void __init overo_init(void)
 {
 	int ret;
 
+	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
+		overo_use_lcd35 = true;
+
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	omap_hsmmc_init(mmc);
-	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
@@ -484,6 +522,8 @@ static void __init overo_init(void)
 	overo_init_keys();
 	omap_twl4030_audio_init("overo", NULL);
 
+	overo_display_init();
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9c2dd102fbb..c3270c0f1fc 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,8 @@
 #include <linux/platform_data/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
+#include <video/omap-panel-data.h>
+
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
 #include <media/ir-rx51.h>
 #endif
@@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 };
 #endif
 
+#define RX51_LCD_RESET_GPIO	90
+
+static struct panel_acx565akm_platform_data acx_pdata = {
+	.name		= "lcd",
+	.source		= "sdi.0",
+	.reset_gpio	= RX51_LCD_RESET_GPIO,
+	.datapairs	= 2,
+};
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 };
@@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.chip_select		= 2,
 		.max_speed_hz		= 6000000,
 		.controller_data	= &mipid_mcspi_config,
+		.platform_data		= &acx_pdata,
 	},
 	[RX51_SPI_TSC2005] = {
 		.modalias		= "tsc2005",
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bdd1e3a179e..43a90c8d683 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -29,34 +29,21 @@
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
-static struct panel_acx565akm_data lcd_data = {
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
+static struct connector_atv_platform_data rx51_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device rx51_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "panel-acx565akm",
-	.type			= OMAP_DISPLAY_TYPE_SDI,
-	.phy.sdi.datapairs	= 2,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device  rx51_tv_device = {
-	.name			= "tv",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.driver_name		= "venc",
-	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
-};
-
-static struct omap_dss_device *rx51_dss_devices[] = {
-	&rx51_lcd_device,
-	&rx51_tv_device,
+static struct platform_device rx51_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &rx51_tv_pdata,
 };
 
 static struct omap_dss_board_info rx51_dss_board_info = {
-	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
-	.devices	= rx51_dss_devices,
-	.default_device	= &rx51_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static int __init rx51_video_init(void)
@@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
 
 	omap_display_init(&rx51_dss_board_info);
 
+	platform_device_register(&rx51_tv_connector_device);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index c2a079cb76f..3d8ecc1e05b 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -25,32 +25,23 @@
 #define LCD_PANEL_RESET_GPIO_PILOT	55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct panel_nec_nl8048_data zoom_lcd_data = {
-	/* res_gpio filled in code */
-	.qvga_gpio = LCD_PANEL_QVGA_GPIO,
-};
+static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
 
-static struct omap_dss_device zoom_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "NEC_8048_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &zoom_lcd_data,
-};
+	.data_lines		= 24,
 
-static struct omap_dss_device *zoom_dss_devices[] = {
-	&zoom_lcd_device,
+	.res_gpio		= -1,	/* filled in code */
+	.qvga_gpio		= LCD_PANEL_QVGA_GPIO,
 };
 
 static struct omap_dss_board_info zoom_dss_data = {
-	.num_devices		= ARRAY_SIZE(zoom_dss_devices),
-	.devices		= zoom_dss_devices,
-	.default_device		= &zoom_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void __init zoom_lcd_panel_init(void)
 {
-	zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+	zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
 			LCD_PANEL_RESET_GPIO_PROD :
 			LCD_PANEL_RESET_GPIO_PILOT;
 }
@@ -61,19 +52,20 @@ static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
 
 static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
 	[0] = {
-		.modalias		= "nec_8048_spi",
+		.modalias		= "panel-nec-nl8048hl11",
 		.bus_num		= 1,
 		.chip_select		= 2,
 		.max_speed_hz		= 375000,
 		.controller_data	= &dss_lcd_mcspi_config,
+		.platform_data		= &zoom_lcd_pdata,
 	},
 };
 
 void __init zoom_display_init(void)
 {
 	omap_display_init(&zoom_dss_data);
+	zoom_lcd_panel_init();
 	spi_register_board_info(nec_8048_spi_board_info,
 				ARRAY_SIZE(nec_8048_spi_board_info));
-	zoom_lcd_panel_init();
 }
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index ff37be1f6f9..03a0516c7f6 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -400,7 +400,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
 	/* Create devices for DPI and SDI */
 
-	pdev = create_simple_dss_pdev("omapdss_dpi", -1,
+	pdev = create_simple_dss_pdev("omapdss_dpi", 0,
 			board_data, sizeof(*board_data), dss_pdev);
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build platform_device for omapdss_dpi\n");
@@ -408,7 +408,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	}
 
 	if (cpu_is_omap34xx()) {
-		pdev = create_simple_dss_pdev("omapdss_sdi", -1,
+		pdev = create_simple_dss_pdev("omapdss_sdi", 0,
 				board_data, sizeof(*board_data), dss_pdev);
 		if (IS_ERR(pdev)) {
 			pr_err("Could not build platform_device for omapdss_sdi\n");
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 043e5705f2a..bf89effa4c9 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -37,70 +38,76 @@
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
-/* Display DVI */
 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
 
-/* Using generic display panel */
-static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 2,
-	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+/* DVI Connector */
+static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 2,
 };
 
-static struct omap_dss_device omap4_panda_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &omap4_dvi_panel,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
+static struct platform_device omap4_panda_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_dvi_connector_pdata,
 };
 
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap4_panda_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tfp410_pdata,
+};
+
+/* HDMI Connector */
+static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
+};
+
+static struct platform_device omap4_panda_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_hdmi_connector_pdata,
+};
+
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
 	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
 	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-	&omap4_panda_dvi_device,
-	&omap4_panda_hdmi_device,
+static struct platform_device omap4_panda_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tpd_pdata,
 };
 
 static struct omap_dss_board_info omap4_panda_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
-	.devices	= omap4_panda_dss_devices,
-	.default_device	= &omap4_panda_dvi_device,
+	.default_display_name = "dvi",
 };
 
-void __init omap4_panda_display_init(void)
+void __init omap4_panda_display_init_of(void)
 {
 	omap_display_init(&omap4_panda_dss_data);
 
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
+	platform_device_register(&omap4_panda_tfp410_device);
+	platform_device_register(&omap4_panda_dvi_connector_device);
 
-void __init omap4_panda_display_init_of(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
+	platform_device_register(&omap4_panda_tpd_device);
+	platform_device_register(&omap4_panda_hdmi_connector_device);
 }
 
 
@@ -109,93 +116,73 @@ void __init omap4_panda_display_init_of(void)
 #define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
 #define DLP_POWER_ON_GPIO	40
 
-static struct nokia_dsi_panel_data dsi1_panel = {
-		.name		= "taal",
-		.reset_gpio	= 102,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 101,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi1_panel,
-	.phy.dsi		= {
-		.module		= 0,
+static struct panel_dsicm_platform_data dsi1_panel = {
+	.name		= "lcd",
+	.source		= "dsi.0",
+	.reset_gpio	= 102,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 101,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD,
 };
 
-static struct nokia_dsi_panel_data dsi2_panel = {
-		.name		= "taal",
-		.reset_gpio	= 104,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 103,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
+static struct platform_device sdp4430_lcd_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 0,
+	.dev.platform_data	= &dsi1_panel,
 };
 
-static struct omap_dss_device sdp4430_lcd2_device = {
-	.name			= "lcd2",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi2_panel,
-	.phy.dsi		= {
-
-		.module		= 1,
+static struct panel_dsicm_platform_data dsi2_panel = {
+	.name		= "lcd2",
+	.source		= "dsi.1",
+	.reset_gpio	= 104,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 103,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
+static struct platform_device sdp4430_lcd2_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 1,
+	.dev.platform_data	= &dsi2_panel,
 };
 
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &sdp4430_hdmi_data,
+/* HDMI Connector */
+static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
 };
 
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-	.picodlp_adapter_id	= 2,
-	.emu_done_gpio		= 44,
-	.pwrgood_gpio		= 45,
+static struct platform_device sdp4430_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_hdmi_connector_pdata,
 };
 
-static struct omap_dss_device sdp4430_picodlp_device = {
-	.name			= "picodlp",
-	.driver_name		= "picodlp_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.data			= &sdp4430_picodlp_pdata,
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
+	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-	&sdp4430_lcd_device,
-	&sdp4430_lcd2_device,
-	&sdp4430_hdmi_device,
-	&sdp4430_picodlp_device,
+static struct platform_device sdp4430_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_tpd_pdata,
 };
 
+
 static struct omap_dss_board_info sdp4430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
-	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /*
@@ -204,7 +191,7 @@ static struct omap_dss_board_info sdp4430_dss_data = {
  * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
  * selected by default
  */
-void __init omap_4430sdp_display_init(void)
+void __init omap_4430sdp_display_init_of(void)
 {
 	int r;
 
@@ -219,33 +206,10 @@ void __init omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
 
 	omap_display_init(&sdp4430_dss_data);
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
 
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+	platform_device_register(&sdp4430_lcd_device);
+	platform_device_register(&sdp4430_lcd2_device);
 
-	omap_display_init(&sdp4430_dss_data);
+	platform_device_register(&sdp4430_tpd_device);
+	platform_device_register(&sdp4430_hdmi_connector_device);
 }
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
index 915f6fff510..c28fe3c0358 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -6,9 +6,7 @@
  * This file will be removed when DSS supports DT.
  */
 
-void __init omap4_panda_display_init(void);
 void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init(void);
 void __init omap_4430sdp_display_init_of(void);
 
 #endif