Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao:
 "blackfin updates for Linux 3.11"

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  smp: refine bf561 smpboot code
  bf609: stmmac: fix build after stmmac_mdio_bus_data changed
  bf609: add cpu revision 0.1
  bf609: rename bfin6xx_spi to bfin_spi3
  kgdb: blackfin: include irq_regs.h in kgdb.c

6 files changed, 24 insertions, 27 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 08c7ac65040..3b6abc54b01 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -283,7 +283,7 @@ config BF_REV_0_0
 
 config BF_REV_0_1
 	bool "0.1"
-	depends on (BF51x || BF52x || (BF54x && !BF54xM))
+	depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x)
 
 config BF_REV_0_2
 	bool "0.2"
diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin_spi3.h
index 89370b653dc..0957e65a54b 100644
--- a/arch/blackfin/include/asm/bfin6xx_spi.h
+++ b/arch/blackfin/include/asm/bfin_spi3.h
@@ -240,7 +240,7 @@ struct bfin_spi_regs {
 #define MAX_CTRL_CS          8  /* cs in spi controller */
 
 /* device.platform_data for SSP controller devices */
-struct bfin6xx_spi_master {
+struct bfin_spi3_master {
 	u16 num_chipselect;
 	u16 pin_req[7];
 };
@@ -248,7 +248,7 @@ struct bfin6xx_spi_master {
 /* spi_board_info.controller_data for SPI slave devices,
  * copied to spi_device.platform_data ... mostly for dma tuning
  */
-struct bfin6xx_spi_chip {
+struct bfin_spi3_chip {
 	u32 control;
 	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
 	u32 tx_dummy_val; /* tx value for rx only transfer */
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index b882ce22c34..fa53faeeb0e 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -9,6 +9,7 @@
 #include <linux/ptrace.h>		/* for linux pt_regs struct */
 #include <linux/kgdb.h>
 #include <linux/uaccess.h>
+#include <asm/irq_regs.h>
 
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index ab1c617b9cf..c77a23bc9de 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -69,7 +69,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	SSYNC();
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
-	set_cpu_online(cpu, true);
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }
@@ -91,7 +90,9 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 		SSYNC();
 	}
 
-	timeout = jiffies + 1 * HZ;
+	timeout = jiffies + HZ;
+	/* release the lock and let coreb run */
+	spin_unlock(&boot_lock);
 	while (time_before(jiffies, timeout)) {
 		if (cpu_online(cpu))
 			break;
@@ -100,8 +101,6 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 	}
 
 	if (cpu_online(cpu)) {
-		/* release the lock and let coreb run */
-		spin_unlock(&boot_lock);
 		return 0;
 	} else
 		panic("CPU%u: processor failed to boot\n", cpu);
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index bba40aed427..0bc47231540 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -17,7 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/usb/musb.h>
-#include <asm/bfin6xx_spi.h>
+#include <asm/bfin_spi3.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -108,7 +108,6 @@ static struct platform_device bfin_rotary_device = {
 static unsigned short pins[] = P_RMII0;
 
 static struct stmmac_mdio_bus_data phy_private_data = {
-	.bus_id = 0,
 	.phy_mask = 1,
 };
 
@@ -745,13 +744,13 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.type = "w25q32",
 };
 
-static struct bfin6xx_spi_chip spi_flash_chip_info = {
+static struct bfin_spi3_chip spi_flash_chip_info = {
 	.enable_dma = true,         /* use dma transfer with this chip*/
 };
 #endif
 
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-static struct bfin6xx_spi_chip spidev_chip_info = {
+static struct bfin_spi3_chip spidev_chip_info = {
 	.enable_dma = true,
 };
 #endif
@@ -1296,7 +1295,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 };
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	{
@@ -1337,13 +1336,13 @@ static struct resource bfin_spi1_resource[] = {
 };
 
 /* SPI controller data */
-static struct bfin6xx_spi_master bf60x_spi_master_info0 = {
+static struct bfin_spi3_master bf60x_spi_master_info0 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master0 = {
-	.name = "bfin-spi",
+	.name = "bfin-spi3",
 	.id = 0, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
 	.resource = bfin_spi0_resource,
@@ -1352,13 +1351,13 @@ static struct platform_device bf60x_spi_master0 = {
 	},
 };
 
-static struct bfin6xx_spi_master bf60x_spi_master_info1 = {
+static struct bfin_spi3_master bf60x_spi_master_info1 = {
 	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
 
 static struct platform_device bf60x_spi_master1 = {
-	.name = "bfin-spi",
+	.name = "bfin-spi3",
 	.id = 1, /* Bus number */
 	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
 	.resource = bfin_spi1_resource,
@@ -1534,7 +1533,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sdh_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_V3)
 	&bf60x_spi_master0,
 	&bf60x_spi_master1,
 #endif
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 1bc2ce6f3c9..961d8392e5e 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -49,6 +49,7 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS];
 struct blackfin_initial_pda __cpuinitdata initial_pda_coreb;
 
 enum ipi_message_type {
+	BFIN_IPI_NONE,
 	BFIN_IPI_TIMER,
 	BFIN_IPI_RESCHEDULE,
 	BFIN_IPI_CALL_FUNC,
@@ -72,8 +73,8 @@ static DEFINE_SPINLOCK(stop_lock);
 
 /* Simple FIFO buffer, overflow leads to panic */
 struct ipi_data {
-	unsigned long count;
-	unsigned long bits;
+	atomic_t count;
+	atomic_t bits;
 };
 
 static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
@@ -146,7 +147,6 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 	platform_clear_ipi(cpu, IRQ_SUPPLE_1);
 
 	bfin_ipi_data = &__get_cpu_var(bfin_ipi);
-	smp_mb();
 	while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) {
 		msg = 0;
 		do {
@@ -170,9 +170,8 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 				ipi_cpu_stop(cpu);
 				break;
 			}
+			atomic_dec(&bfin_ipi_data->count);
 		} while (msg < BITS_PER_LONG);
-
-		smp_mb();
 	}
 	return IRQ_HANDLED;
 }
@@ -195,12 +194,10 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	smp_mb();
 	for_each_cpu(cpu, cpumask) {
 		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
-		smp_mb();
-		set_bit(msg, &bfin_ipi_data->bits);
-		bfin_ipi_data->count++;
+		atomic_set_mask((1 << msg), &bfin_ipi_data->bits);
+		atomic_inc(&bfin_ipi_data->count);
 		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
 	}
 
@@ -319,7 +316,6 @@ void __cpuinit secondary_start_kernel(void)
 	setup_secondary(cpu);
 
 	platform_secondary_init(cpu);
-
 	/* setup local core timer */
 	bfin_local_timer_setup();
 
@@ -335,6 +331,8 @@ void __cpuinit secondary_start_kernel(void)
 	 */
 	calibrate_delay();
 
+	/* We are done with local CPU inits, unblock the boot CPU. */
+	set_cpu_online(cpu, true);
 	cpu_startup_entry(CPUHP_ONLINE);
 }