summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2010-11-21 10:31:19 +0800
committerNicolas Ferre <nicolas.ferre@atmel.com>2010-11-30 17:23:02 +0100
commit82d5b5c8da769184a9bc2cc2adc90555f4aa90b0 (patch)
tree7b76f5a4689ca5c8a306d984446048d10b71df65 /arch
parent985f554d8f0c2cf5bda5720921cb48654420d6b1 (diff)
at91/picotux200: remove commenting usb device and dataflash support
as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-at91/board-picotux200.c30
1 files changed, 0 insertions, 30 deletions
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ac1a3b527b3..55dad3a4654 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -74,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
};
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// .vbus_pin = AT91_PIN_PD4,
-// .pullup_pin = AT91_PIN_PD5,
-// };
-
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
@@ -86,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.wp_pin = AT91_PIN_PA17,
};
-// static struct spi_board_info picotux200_spi_devices[] = {
-// { /* DataFlash chip */
-// .modalias = "mtd_dataflash",
-// .chip_select = 0,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// { /* DataFlash card */
-// .modalias = "mtd_dataflash",
-// .chip_select = 3,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #endif
-// };
-
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
@@ -132,21 +112,11 @@ static void __init picotux200_board_init(void)
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
- /* USB Device */
- // at91_add_device_udc(&picotux200_udc_data);
- // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
- /* SPI */
- // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}