summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2012-02-07 19:42:07 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2012-02-09 16:25:37 +0000
commitb46c0f74657d1fe1c1b0c1452631cc38a9e6987f (patch)
treeb6004a9408492488526c7c5cfdbb43b28c3d814a /arch
parentb8b9987ffdc2ab9c5e2c1edad556b23ccb38249b (diff)
ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
armv7's flush_cache_all() flushes caches via set/way. To determine the cache attributes (line size, number of sets, etc.) the assembly first writes the CSSELR register to select a cache level and then reads the CCSIDR register. The CSSELR register is banked per-cpu and is used to determine which cache level CCSIDR reads. If the task is migrated between when the CSSELR is written and the CCSIDR is read the CCSIDR value may be for an unexpected cache level (for example L1 instead of L2) and incorrect cache flushing could occur. Disable interrupts across the write and read so that the correct cache attributes are read and used for the cache flushing routine. We disable interrupts instead of disabling preemption because the critical section is only 3 instructions and we want to call v7_dcache_flush_all from __v7_setup which doesn't have a full kernel stack with a struct thread_info. This fixes a problem we see in scm_call() when flush_cache_all() is called from preemptible context and sometimes the L2 cache is not properly flushed out. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mm/cache-v7.S6
1 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 07c4bc8ea0a..7a24d39661f 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -54,9 +54,15 @@ loop1:
and r1, r1, #7 @ mask of the bits for current cache only
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+ save_and_disable_irqs r9 @ make cssr&csidr read atomic
+#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+#ifdef CONFIG_PREEMPT
+ restore_irqs_notrace r9
+#endif
and r2, r1, #7 @ extract the length of the cache lines
add r2, r2, #4 @ add 4 (line length offset)
ldr r4, =0x3ff