ACPI / processor: Use common hotplug infrastructure

Split the ACPI processor driver into two parts, one that is
non-modular, resides in the ACPI core and handles the enumeration
and hotplug of processors and one that implements the rest of the
existing processor driver functionality.

The non-modular part uses an ACPI scan handler object to enumerate
processors on the basis of information provided by the ACPI namespace
and to hook up with the common ACPI hotplug infrastructure.  It also
populates the ACPI handle of each processor device having a
corresponding object in the ACPI namespace, which allows the driver
proper to bind to those devices, and makes the driver bind to them
if it is readily available (i.e. loaded) when the scan handler's
.attach() routine is running.

There are a few reasons to make this change.

First, switching the ACPI processor driver to using the common ACPI
hotplug infrastructure reduces code duplication and size considerably,
even though a new file is created along with a header comment etc.

Second, since the common hotplug code attempts to offline devices
before starting the (non-reversible) removal procedure, it will abort
(and possibly roll back) hot-remove operations involving processors
if cpu_down() returns an error code for one of them instead of
continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove
is unset).  That is a more desirable behavior than what the current
code does.

Finally, the separation of the scan/hotplug part from the driver
proper makes it possible to simplify the driver's .remove() routine,
because it doesn't need to worry about the possible cleanup related
to processor removal any more (the scan/hotplug part is responsible
for that now) and can handle device removal and driver removal
symmetricaly (i.e. as appropriate).

Some user-visible changes in sysfs are made (for example, the
'sysdev' link from the ACPI device node to the processor device's
directory is gone and a 'physical_node' link is present instead
and a corresponding 'firmware_node' is present in the processor
device's directory, the processor driver is now visible under
/sys/bus/cpu/drivers/ and bound to the processor device), but
that shouldn't affect the functionality that users care about
(frequency scaling, C-states and thermal management).

Tested on my venerable Toshiba Portege R500.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>

1 files changed, 484 insertions, 0 deletions

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
new file mode 100644
index 00000000000..587d2af4b32
--- /dev/null
+++ b/drivers/acpi/acpi_processor.c
@@ -0,0 +1,484 @@
+/*
+ * acpi_processor.c - ACPI processor enumeration support
+ *
+ * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
+ * Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ * Copyright (C) 2013, Intel Corporation
+ *                     Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <acpi/processor.h>
+
+#include <asm/cpu.h>
+
+#include "internal.h"
+
+#define _COMPONENT	ACPI_PROCESSOR_COMPONENT
+
+ACPI_MODULE_NAME("processor");
+
+/* --------------------------------------------------------------------------
+                                Errata Handling
+   -------------------------------------------------------------------------- */
+
+struct acpi_processor_errata errata __read_mostly;
+EXPORT_SYMBOL_GPL(errata);
+
+static int acpi_processor_errata_piix4(struct pci_dev *dev)
+{
+	u8 value1 = 0;
+	u8 value2 = 0;
+
+
+	if (!dev)
+		return -EINVAL;
+
+	/*
+	 * Note that 'dev' references the PIIX4 ACPI Controller.
+	 */
+
+	switch (dev->revision) {
+	case 0:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+		break;
+	case 1:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+		break;
+	case 2:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+		break;
+	case 3:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+		break;
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+		break;
+	}
+
+	switch (dev->revision) {
+
+	case 0:		/* PIIX4 A-step */
+	case 1:		/* PIIX4 B-step */
+		/*
+		 * See specification changes #13 ("Manual Throttle Duty Cycle")
+		 * and #14 ("Enabling and Disabling Manual Throttle"), plus
+		 * erratum #5 ("STPCLK# Deassertion Time") from the January
+		 * 2002 PIIX4 specification update.  Applies to only older
+		 * PIIX4 models.
+		 */
+		errata.piix4.throttle = 1;
+
+	case 2:		/* PIIX4E */
+	case 3:		/* PIIX4M */
+		/*
+		 * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
+		 * Livelock") from the January 2002 PIIX4 specification update.
+		 * Applies to all PIIX4 models.
+		 */
+
+		/*
+		 * BM-IDE
+		 * ------
+		 * Find the PIIX4 IDE Controller and get the Bus Master IDE
+		 * Status register address.  We'll use this later to read
+		 * each IDE controller's DMA status to make sure we catch all
+		 * DMA activity.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			errata.piix4.bmisx = pci_resource_start(dev, 4);
+			pci_dev_put(dev);
+		}
+
+		/*
+		 * Type-F DMA
+		 * ----------
+		 * Find the PIIX4 ISA Controller and read the Motherboard
+		 * DMA controller's status to see if Type-F (Fast) DMA mode
+		 * is enabled (bit 7) on either channel.  Note that we'll
+		 * disable C3 support if this is enabled, as some legacy
+		 * devices won't operate well if fast DMA is disabled.
+		 */
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+				     PCI_DEVICE_ID_INTEL_82371AB_0,
+				     PCI_ANY_ID, PCI_ANY_ID, NULL);
+		if (dev) {
+			pci_read_config_byte(dev, 0x76, &value1);
+			pci_read_config_byte(dev, 0x77, &value2);
+			if ((value1 & 0x80) || (value2 & 0x80))
+				errata.piix4.fdma = 1;
+			pci_dev_put(dev);
+		}
+
+		break;
+	}
+
+	if (errata.piix4.bmisx)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus master activity detection (BM-IDE) erratum enabled\n"));
+	if (errata.piix4.fdma)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Type-F DMA livelock erratum (C3 disabled)\n"));
+
+	return 0;
+}
+
+static int acpi_processor_errata(struct acpi_processor *pr)
+{
+	int result = 0;
+	struct pci_dev *dev = NULL;
+
+
+	if (!pr)
+		return -EINVAL;
+
+	/*
+	 * PIIX4
+	 */
+	dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+			     PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
+			     PCI_ANY_ID, NULL);
+	if (dev) {
+		result = acpi_processor_errata_piix4(dev);
+		pci_dev_put(dev);
+	}
+
+	return result;
+}
+
+/* --------------------------------------------------------------------------
+                                Initialization
+   -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+static int acpi_processor_hotadd_init(struct acpi_processor *pr)
+{
+	unsigned long long sta;
+	acpi_status status;
+	int ret;
+
+	status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
+	if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT))
+		return -ENODEV;
+
+	ret = acpi_map_lsapic(pr->handle, &pr->id);
+	if (ret)
+		return ret;
+
+	ret = arch_register_cpu(pr->id);
+	if (ret) {
+		acpi_unmap_lsapic(pr->id);
+		return ret;
+	}
+
+	/*
+	 * CPU got hot-added, but cpu_data is not initialized yet.  Set a flag
+	 * to delay cpu_idle/throttling initialization and do it when the CPU
+	 * gets online for the first time.
+	 */
+	pr_info("CPU%d has been hot-added\n", pr->id);
+	pr->flags.need_hotplug_init = 1;
+	return 0;
+}
+#else
+static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static int acpi_processor_get_info(struct acpi_device *device)
+{
+	union acpi_object object = { 0 };
+	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
+	struct acpi_processor *pr = acpi_driver_data(device);
+	int cpu_index, device_declaration = 0;
+	acpi_status status = AE_OK;
+	static int cpu0_initialized;
+
+	if (num_online_cpus() > 1)
+		errata.smp = TRUE;
+
+	acpi_processor_errata(pr);
+
+	/*
+	 * Check to see if we have bus mastering arbitration control.  This
+	 * is required for proper C3 usage (to maintain cache coherency).
+	 */
+	if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
+		pr->flags.bm_control = 1;
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Bus mastering arbitration control present\n"));
+	} else
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "No bus mastering arbitration control\n"));
+
+	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+		/* Declared with "Processor" statement; match ProcessorID */
+		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			dev_err(&device->dev,
+				"Failed to evaluate processor object (0x%x)\n",
+				status);
+			return -ENODEV;
+		}
+
+		/*
+		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+		 *      arch/xxx/acpi.c
+		 */
+		pr->acpi_id = object.processor.proc_id;
+	} else {
+		/*
+		 * Declared with "Device" statement; match _UID.
+		 * Note that we don't handle string _UIDs yet.
+		 */
+		unsigned long long value;
+		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
+						NULL, &value);
+		if (ACPI_FAILURE(status)) {
+			dev_err(&device->dev,
+				"Failed to evaluate processor _UID (0x%x)\n",
+				status);
+			return -ENODEV;
+		}
+		device_declaration = 1;
+		pr->acpi_id = value;
+	}
+	cpu_index = acpi_get_cpuid(pr->handle, device_declaration, pr->acpi_id);
+
+	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
+	if (!cpu0_initialized && (cpu_index == -1) &&
+	    (num_online_cpus() == 1)) {
+		cpu_index = 0;
+	}
+
+	cpu0_initialized = 1;
+
+	pr->id = cpu_index;
+
+	/*
+	 *  Extra Processor objects may be enumerated on MP systems with
+	 *  less than the max # of CPUs. They should be ignored _iff
+	 *  they are physically not present.
+	 */
+	if (pr->id == -1) {
+		int ret = acpi_processor_hotadd_init(pr);
+		if (ret)
+			return ret;
+	}
+	/*
+	 * On some boxes several processors use the same processor bus id.
+	 * But they are located in different scope. For example:
+	 * \_SB.SCK0.CPU0
+	 * \_SB.SCK1.CPU0
+	 * Rename the processor device bus id. And the new bus id will be
+	 * generated as the following format:
+	 * CPU+CPU ID.
+	 */
+	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
+			  pr->acpi_id));
+
+	if (!object.processor.pblk_address)
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+	else if (object.processor.pblk_length != 6)
+		dev_err(&device->dev, "Invalid PBLK length [%d]\n",
+			    object.processor.pblk_length);
+	else {
+		pr->throttling.address = object.processor.pblk_address;
+		pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
+		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
+
+		pr->pblk = object.processor.pblk_address;
+
+		/*
+		 * We don't care about error returns - we just try to mark
+		 * these reserved so that nobody else is confused into thinking
+		 * that this region might be unused..
+		 *
+		 * (In particular, allocating the IO range for Cardbus)
+		 */
+		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+	}
+
+	/*
+	 * If ACPI describes a slot number for this CPU, we can use it to
+	 * ensure we get the right value in the "physical id" field
+	 * of /proc/cpuinfo
+	 */
+	status = acpi_evaluate_object(pr->handle, "_SUN", NULL, &buffer);
+	if (ACPI_SUCCESS(status))
+		arch_fix_phys_package_id(pr->id, object.integer.value);
+
+	return 0;
+}
+
+/*
+ * Do not put anything in here which needs the core to be online.
+ * For example MSR access or setting up things which check for cpuinfo_x86
+ * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
+ * Such things have to be put in and set up by the processor driver's .probe().
+ */
+static DEFINE_PER_CPU(void *, processor_device_array);
+
+static int __cpuinit acpi_processor_add(struct acpi_device *device,
+					const struct acpi_device_id *id)
+{
+	struct acpi_processor *pr;
+	struct device *dev;
+	int result = 0;
+
+	pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
+	if (!pr)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+		result = -ENOMEM;
+		goto err_free_pr;
+	}
+
+	pr->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
+	device->driver_data = pr;
+
+	result = acpi_processor_get_info(device);
+	if (result) /* Processor is not physically present or unavailable */
+		return 0;
+
+#ifdef CONFIG_SMP
+	if (pr->id >= setup_max_cpus && pr->id != 0)
+		return 0;
+#endif
+
+	BUG_ON(pr->id >= nr_cpu_ids);
+
+	/*
+	 * Buggy BIOS check.
+	 * ACPI id of processors can be reported wrongly by the BIOS.
+	 * Don't trust it blindly
+	 */
+	if (per_cpu(processor_device_array, pr->id) != NULL &&
+	    per_cpu(processor_device_array, pr->id) != device) {
+		dev_warn(&device->dev,
+			"BIOS reported wrong ACPI id %d for the processor\n",
+			pr->id);
+		/* Give up, but do not abort the namespace scan. */
+		goto err;
+	}
+	/*
+	 * processor_device_array is not cleared on errors to allow buggy BIOS
+	 * checks.
+	 */
+	per_cpu(processor_device_array, pr->id) = device;
+
+	dev = get_cpu_device(pr->id);
+	ACPI_HANDLE_SET(dev, pr->handle);
+	result = acpi_bind_one(dev, NULL);
+	if (result)
+		goto err;
+
+	pr->dev = dev;
+	dev->offline = pr->flags.need_hotplug_init;
+
+	/* Trigger the processor driver's .probe() if present. */
+	if (device_attach(dev) >= 0)
+		return 1;
+
+	dev_err(dev, "Processor driver could not be attached\n");
+	acpi_unbind_one(dev);
+
+ err:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+	device->driver_data = NULL;
+ err_free_pr:
+	kfree(pr);
+	return result;
+}
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/* --------------------------------------------------------------------------
+                                    Removal
+   -------------------------------------------------------------------------- */
+
+static void acpi_processor_remove(struct acpi_device *device)
+{
+	struct acpi_processor *pr;
+
+	if (!device || !acpi_driver_data(device))
+		return;
+
+	pr = acpi_driver_data(device);
+	if (pr->id >= nr_cpu_ids)
+		goto out;
+
+	/*
+	 * The only reason why we ever get here is CPU hot-removal.  The CPU is
+	 * already offline and the ACPI device removal locking prevents it from
+	 * being put back online at this point.
+	 *
+	 * Unbind the driver from the processor device and detach it from the
+	 * ACPI companion object.
+	 */
+	device_release_driver(pr->dev);
+	acpi_unbind_one(pr->dev);
+
+	/* Clean up. */
+	per_cpu(processor_device_array, pr->id) = NULL;
+	try_offline_node(cpu_to_node(pr->id));
+
+	/* Remove the CPU. */
+	get_online_cpus();
+	arch_unregister_cpu(pr->id);
+	acpi_unmap_lsapic(pr->id);
+	put_online_cpus();
+
+ out:
+	free_cpumask_var(pr->throttling.shared_cpu_map);
+	kfree(pr);
+}
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+/*
+ * The following ACPI IDs are known to be suitable for representing as
+ * processor devices.
+ */
+static const struct acpi_device_id processor_device_ids[] = {
+
+	{ ACPI_PROCESSOR_OBJECT_HID, },
+	{ ACPI_PROCESSOR_DEVICE_HID, },
+
+	{ }
+};
+
+static struct acpi_scan_handler __refdata processor_handler = {
+	.ids = processor_device_ids,
+	.attach = acpi_processor_add,
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+	.detach = acpi_processor_remove,
+#endif
+	.hotplug = {
+		.enabled = true,
+	},
+};
+
+void __init acpi_processor_init(void)
+{
+	acpi_scan_add_handler_with_hotplug(&processor_handler, "processor");
+}