Merge branch 'master' into next

Conflicts:
	fs/namei.c

Manually merged per:

diff --cc fs/namei.c
index 734f2b5,bbc15c2..0000000
--- a/fs/namei.c
+++ b/fs/namei.c
@@@ -860,9 -848,8 +849,10 @@@ static int __link_path_walk(const char
  		nd->flags |= LOOKUP_CONTINUE;
  		err = exec_permission_lite(inode);
  		if (err == -EAGAIN)
- 			err = vfs_permission(nd, MAY_EXEC);
+ 			err = inode_permission(nd->path.dentry->d_inode,
+ 					       MAY_EXEC);
 +		if (!err)
 +			err = ima_path_check(&nd->path, MAY_EXEC);
   		if (err)
  			break;

@@@ -1525,14 -1506,9 +1509,14 @@@ int may_open(struct path *path, int acc
  		flag &= ~O_TRUNC;
  	}

- 	error = vfs_permission(nd, acc_mode);
+ 	error = inode_permission(inode, acc_mode);
  	if (error)
  		return error;
 +
- 	error = ima_path_check(&nd->path,
++	error = ima_path_check(path,
 +			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 +	if (error)
 +		return error;
  	/*
  	 * An append-only file must be opened in append mode for writing.
  	 */

Signed-off-by: James Morris <jmorris@namei.org>

1 files changed, 499 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
new file mode 100644
index 00000000000..76ec8ff903b
--- /dev/null
+++ b/drivers/acpi/acpica/exregion.c
@@ -0,0 +1,499 @@
+
+/******************************************************************************
+ *
+ * Module Name: exregion - ACPI default op_region (address space) handlers
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exregion")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_memory_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the System Memory address space (Op Region)
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ex_system_memory_space_handler(u32 function,
+				    acpi_physical_address address,
+				    u32 bit_width,
+				    acpi_integer * value,
+				    void *handler_context, void *region_context)
+{
+	acpi_status status = AE_OK;
+	void *logical_addr_ptr = NULL;
+	struct acpi_mem_space_context *mem_info = region_context;
+	u32 length;
+	acpi_size window_size;
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
+	u32 remainder;
+#endif
+
+	ACPI_FUNCTION_TRACE(ex_system_memory_space_handler);
+
+	/* Validate and translate the bit width */
+
+	switch (bit_width) {
+	case 8:
+		length = 1;
+		break;
+
+	case 16:
+		length = 2;
+		break;
+
+	case 32:
+		length = 4;
+		break;
+
+	case 64:
+		length = 8;
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %d",
+			    bit_width));
+		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
+	}
+
+#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
+	/*
+	 * Hardware does not support non-aligned data transfers, we must verify
+	 * the request.
+	 */
+	(void)acpi_ut_short_divide((acpi_integer) address, length, NULL,
+				   &remainder);
+	if (remainder != 0) {
+		return_ACPI_STATUS(AE_AML_ALIGNMENT);
+	}
+#endif
+
+	/*
+	 * Does the request fit into the cached memory mapping?
+	 * Is 1) Address below the current mapping? OR
+	 *    2) Address beyond the current mapping?
+	 */
+	if ((address < mem_info->mapped_physical_address) ||
+	    (((acpi_integer) address + length) > ((acpi_integer)
+						  mem_info->
+						  mapped_physical_address +
+						  mem_info->mapped_length))) {
+		/*
+		 * The request cannot be resolved by the current memory mapping;
+		 * Delete the existing mapping and create a new one.
+		 */
+		if (mem_info->mapped_length) {
+
+			/* Valid mapping, delete it */
+
+			acpi_os_unmap_memory(mem_info->mapped_logical_address,
+					     mem_info->mapped_length);
+		}
+
+		/*
+		 * Don't attempt to map memory beyond the end of the region, and
+		 * constrain the maximum mapping size to something reasonable.
+		 */
+		window_size = (acpi_size)
+		    ((mem_info->address + mem_info->length) - address);
+
+		if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
+			window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+		}
+
+		/* Create a new mapping starting at the address given */
+
+		mem_info->mapped_logical_address =
+			acpi_os_map_memory((acpi_physical_address) address, window_size);
+		if (!mem_info->mapped_logical_address) {
+			ACPI_ERROR((AE_INFO,
+				    "Could not map memory at %8.8X%8.8X, size %X",
+				    ACPI_FORMAT_NATIVE_UINT(address),
+				    (u32) window_size));
+			mem_info->mapped_length = 0;
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		/* Save the physical address and mapping size */
+
+		mem_info->mapped_physical_address = address;
+		mem_info->mapped_length = window_size;
+	}
+
+	/*
+	 * Generate a logical pointer corresponding to the address we want to
+	 * access
+	 */
+	logical_addr_ptr = mem_info->mapped_logical_address +
+	    ((acpi_integer) address -
+	     (acpi_integer) mem_info->mapped_physical_address);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			  "System-Memory (width %d) R/W %d Address=%8.8X%8.8X\n",
+			  bit_width, function,
+			  ACPI_FORMAT_NATIVE_UINT(address)));
+
+	/*
+	 * Perform the memory read or write
+	 *
+	 * Note: For machines that do not support non-aligned transfers, the target
+	 * address was checked for alignment above.  We do not attempt to break the
+	 * transfer up into smaller (byte-size) chunks because the AML specifically
+	 * asked for a transfer width that the hardware may require.
+	 */
+	switch (function) {
+	case ACPI_READ:
+
+		*value = 0;
+		switch (bit_width) {
+		case 8:
+			*value = (acpi_integer) ACPI_GET8(logical_addr_ptr);
+			break;
+
+		case 16:
+			*value = (acpi_integer) ACPI_GET16(logical_addr_ptr);
+			break;
+
+		case 32:
+			*value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
+			break;
+
+		case 64:
+			*value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
+			break;
+
+		default:
+			/* bit_width was already validated */
+			break;
+		}
+		break;
+
+	case ACPI_WRITE:
+
+		switch (bit_width) {
+		case 8:
+			ACPI_SET8(logical_addr_ptr) = (u8) * value;
+			break;
+
+		case 16:
+			ACPI_SET16(logical_addr_ptr) = (u16) * value;
+			break;
+
+		case 32:
+			ACPI_SET32(logical_addr_ptr) = (u32) * value;
+			break;
+
+		case 64:
+			ACPI_SET64(logical_addr_ptr) = (u64) * value;
+			break;
+
+		default:
+			/* bit_width was already validated */
+			break;
+		}
+		break;
+
+	default:
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_io_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the System IO address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_io_space_handler(u32 function,
+				acpi_physical_address address,
+				u32 bit_width,
+				acpi_integer * value,
+				void *handler_context, void *region_context)
+{
+	acpi_status status = AE_OK;
+	u32 value32;
+
+	ACPI_FUNCTION_TRACE(ex_system_io_space_handler);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			  "System-IO (width %d) R/W %d Address=%8.8X%8.8X\n",
+			  bit_width, function,
+			  ACPI_FORMAT_NATIVE_UINT(address)));
+
+	/* Decode the function parameter */
+
+	switch (function) {
+	case ACPI_READ:
+
+		status = acpi_os_read_port((acpi_io_address) address,
+					   &value32, bit_width);
+		*value = value32;
+		break;
+
+	case ACPI_WRITE:
+
+		status = acpi_os_write_port((acpi_io_address) address,
+					    (u32) * value, bit_width);
+		break;
+
+	default:
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_pci_config_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the PCI Config address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_config_space_handler(u32 function,
+				 acpi_physical_address address,
+				 u32 bit_width,
+				 acpi_integer * value,
+				 void *handler_context, void *region_context)
+{
+	acpi_status status = AE_OK;
+	struct acpi_pci_id *pci_id;
+	u16 pci_register;
+	u32 value32;
+
+	ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);
+
+	/*
+	 *  The arguments to acpi_os(Read|Write)pci_configuration are:
+	 *
+	 *  pci_segment is the PCI bus segment range 0-31
+	 *  pci_bus     is the PCI bus number range 0-255
+	 *  pci_device  is the PCI device number range 0-31
+	 *  pci_function is the PCI device function number
+	 *  pci_register is the Config space register range 0-255 bytes
+	 *
+	 *  Value - input value for write, output address for read
+	 *
+	 */
+	pci_id = (struct acpi_pci_id *)region_context;
+	pci_register = (u16) (u32) address;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			  "Pci-Config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
+			  function, bit_width, pci_id->segment, pci_id->bus,
+			  pci_id->device, pci_id->function, pci_register));
+
+	switch (function) {
+	case ACPI_READ:
+
+		status = acpi_os_read_pci_configuration(pci_id, pci_register,
+							&value32, bit_width);
+		*value = value32;
+		break;
+
+	case ACPI_WRITE:
+
+		status = acpi_os_write_pci_configuration(pci_id, pci_register,
+							 *value, bit_width);
+		break;
+
+	default:
+
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_cmos_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the CMOS address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_cmos_space_handler(u32 function,
+			   acpi_physical_address address,
+			   u32 bit_width,
+			   acpi_integer * value,
+			   void *handler_context, void *region_context)
+{
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE(ex_cmos_space_handler);
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_pci_bar_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_bar_space_handler(u32 function,
+			      acpi_physical_address address,
+			      u32 bit_width,
+			      acpi_integer * value,
+			      void *handler_context, void *region_context)
+{
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler);
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_data_table_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the Data Table address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_data_table_space_handler(u32 function,
+				 acpi_physical_address address,
+				 u32 bit_width,
+				 acpi_integer * value,
+				 void *handler_context, void *region_context)
+{
+	ACPI_FUNCTION_TRACE(ex_data_table_space_handler);
+
+	/* Perform the memory read or write */
+
+	switch (function) {
+	case ACPI_READ:
+
+		ACPI_MEMCPY(ACPI_CAST_PTR(char, value),
+			    ACPI_PHYSADDR_TO_PTR(address),
+			    ACPI_DIV_8(bit_width));
+		break;
+
+	case ACPI_WRITE:
+	default:
+
+		return_ACPI_STATUS(AE_SUPPORT);
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}