Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
  ACPI: install ACPI table handler before any dynamic tables being loaded
  ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
  ACPI: Page based coalescing of I/O remappings optimization
  ACPI: Convert simple locking to RCU based locking
  ACPI: Pre-map 'system event' related register blocks
  ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Maintain a list of ACPI memory mapped I/O remappings
  ACPI: Fix ioremap size for MMIO reads and writes
  ACPI / Battery: Return -ENODEV for unknown values in get_property()
  ACPI / PM: Fix reference counting of power resources
  Subject: [PATCH] ACPICA: Fix Scope() op in module level code
  ACPI battery: support percentage battery remaining capacity
  ACPI: Make Embedded Controller command timeout delay configurable
  ACPI dock: move some functions to .init.text
  ACPI: thermal: remove unused limit code
  ACPI: static sleep_states[] and acpi_gts_bfs_check
  ACPI: remove dead code
  ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
  ACPI: Only processor needs CPU_IDLE
  ACPICA: Update version to 20101013
  ...

1 files changed, 412 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c
new file mode 100644
index 00000000000..ad21c7d8bf4
--- /dev/null
+++ b/drivers/acpi/acpica/hwpci.c
@@ -0,0 +1,412 @@
+/*******************************************************************************
+ *
+ * Module Name: hwpci - Obtain PCI bus, device, and function numbers
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT          ACPI_NAMESPACE
+ACPI_MODULE_NAME("hwpci")
+
+/* PCI configuration space values */
+#define PCI_CFG_HEADER_TYPE_REG             0x0E
+#define PCI_CFG_PRIMARY_BUS_NUMBER_REG      0x18
+#define PCI_CFG_SECONDARY_BUS_NUMBER_REG    0x19
+/* PCI header values */
+#define PCI_HEADER_TYPE_MASK                0x7F
+#define PCI_TYPE_BRIDGE                     0x01
+#define PCI_TYPE_CARDBUS_BRIDGE             0x02
+typedef struct acpi_pci_device {
+	acpi_handle device;
+	struct acpi_pci_device *next;
+
+} acpi_pci_device;
+
+/* Local prototypes */
+
+static acpi_status
+acpi_hw_build_pci_list(acpi_handle root_pci_device,
+		       acpi_handle pci_region,
+		       struct acpi_pci_device **return_list_head);
+
+static acpi_status
+acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
+			 struct acpi_pci_device *list_head);
+
+static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head);
+
+static acpi_status
+acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id,
+			    acpi_handle pci_device,
+			    u16 *bus_number, u8 *is_bridge);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_derive_pci_id
+ *
+ * PARAMETERS:  pci_id              - Initial values for the PCI ID. May be
+ *                                    modified by this function.
+ *              root_pci_device     - A handle to a PCI device object. This
+ *                                    object must be a PCI Root Bridge having a
+ *                                    _HID value of either PNP0A03 or PNP0A08
+ *              pci_region          - A handle to a PCI configuration space
+ *                                    Operation Region being initialized
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function derives a full PCI ID for a PCI device,
+ *              consisting of a Segment number, Bus number, Device number,
+ *              and function code.
+ *
+ *              The PCI hardware dynamically configures PCI bus numbers
+ *              depending on the bus topology discovered during system
+ *              initialization. This function is invoked during configuration
+ *              of a PCI_Config Operation Region in order to (possibly) update
+ *              the Bus/Device/Function numbers in the pci_id with the actual
+ *              values as determined by the hardware and operating system
+ *              configuration.
+ *
+ *              The pci_id parameter is initially populated during the Operation
+ *              Region initialization. This function is then called, and is
+ *              will make any necessary modifications to the Bus, Device, or
+ *              Function number PCI ID subfields as appropriate for the
+ *              current hardware and OS configuration.
+ *
+ * NOTE:        Created 08/2010. Replaces the previous OSL acpi_os_derive_pci_id
+ *              interface since this feature is OS-independent. This module
+ *              specifically avoids any use of recursion by building a local
+ *              temporary device list.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id,
+		      acpi_handle root_pci_device, acpi_handle pci_region)
+{
+	acpi_status status;
+	struct acpi_pci_device *list_head = NULL;
+
+	ACPI_FUNCTION_TRACE(hw_derive_pci_id);
+
+	if (!pci_id) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	/* Build a list of PCI devices, from pci_region up to root_pci_device */
+
+	status =
+	    acpi_hw_build_pci_list(root_pci_device, pci_region, &list_head);
+	if (ACPI_SUCCESS(status)) {
+
+		/* Walk the list, updating the PCI device/function/bus numbers */
+
+		status = acpi_hw_process_pci_list(pci_id, list_head);
+	}
+
+	/* Always delete the list */
+
+	acpi_hw_delete_pci_list(list_head);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_build_pci_list
+ *
+ * PARAMETERS:  root_pci_device     - A handle to a PCI device object. This
+ *                                    object is guaranteed to be a PCI Root
+ *                                    Bridge having a _HID value of either
+ *                                    PNP0A03 or PNP0A08
+ *              pci_region          - A handle to the PCI configuration space
+ *                                    Operation Region
+ *              return_list_head    - Where the PCI device list is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Builds a list of devices from the input PCI region up to the
+ *              Root PCI device for this namespace subtree.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_build_pci_list(acpi_handle root_pci_device,
+		       acpi_handle pci_region,
+		       struct acpi_pci_device **return_list_head)
+{
+	acpi_handle current_device;
+	acpi_handle parent_device;
+	acpi_status status;
+	struct acpi_pci_device *list_element;
+	struct acpi_pci_device *list_head = NULL;
+
+	/*
+	 * Ascend namespace branch until the root_pci_device is reached, building
+	 * a list of device nodes. Loop will exit when either the PCI device is
+	 * found, or the root of the namespace is reached.
+	 */
+	current_device = pci_region;
+	while (1) {
+		status = acpi_get_parent(current_device, &parent_device);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		/* Finished when we reach the PCI root device (PNP0A03 or PNP0A08) */
+
+		if (parent_device == root_pci_device) {
+			*return_list_head = list_head;
+			return (AE_OK);
+		}
+
+		list_element = ACPI_ALLOCATE(sizeof(struct acpi_pci_device));
+		if (!list_element) {
+			return (AE_NO_MEMORY);
+		}
+
+		/* Put new element at the head of the list */
+
+		list_element->next = list_head;
+		list_element->device = parent_device;
+		list_head = list_element;
+
+		current_device = parent_device;
+	}
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_process_pci_list
+ *
+ * PARAMETERS:  pci_id              - Initial values for the PCI ID. May be
+ *                                    modified by this function.
+ *              list_head           - Device list created by
+ *                                    acpi_hw_build_pci_list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Walk downward through the PCI device list, getting the device
+ *              info for each, via the PCI configuration space and updating
+ *              the PCI ID as necessary. Deletes the list during traversal.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
+			 struct acpi_pci_device *list_head)
+{
+	acpi_status status = AE_OK;
+	struct acpi_pci_device *info;
+	u16 bus_number;
+	u8 is_bridge = TRUE;
+
+	ACPI_FUNCTION_NAME(hw_process_pci_list);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+			  "Input PciId:  Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X\n",
+			  pci_id->segment, pci_id->bus, pci_id->device,
+			  pci_id->function));
+
+	bus_number = pci_id->bus;
+
+	/*
+	 * Descend down the namespace tree, collecting PCI device, function,
+	 * and bus numbers. bus_number is only important for PCI bridges.
+	 * Algorithm: As we descend the tree, use the last valid PCI device,
+	 * function, and bus numbers that are discovered, and assign them
+	 * to the PCI ID for the target device.
+	 */
+	info = list_head;
+	while (info) {
+		status = acpi_hw_get_pci_device_info(pci_id, info->device,
+						     &bus_number, &is_bridge);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		info = info->next;
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+			  "Output PciId: Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X "
+			  "Status %X BusNumber %X IsBridge %X\n",
+			  pci_id->segment, pci_id->bus, pci_id->device,
+			  pci_id->function, status, bus_number, is_bridge));
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_delete_pci_list
+ *
+ * PARAMETERS:  list_head           - Device list created by
+ *                                    acpi_hw_build_pci_list
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Free the entire PCI list.
+ *
+ ******************************************************************************/
+
+static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head)
+{
+	struct acpi_pci_device *next;
+	struct acpi_pci_device *previous;
+
+	next = list_head;
+	while (next) {
+		previous = next;
+		next = previous->next;
+		ACPI_FREE(previous);
+	}
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_hw_get_pci_device_info
+ *
+ * PARAMETERS:  pci_id              - Initial values for the PCI ID. May be
+ *                                    modified by this function.
+ *              pci_device          - Handle for the PCI device object
+ *              bus_number          - Where a PCI bridge bus number is returned
+ *              is_bridge           - Return value, indicates if this PCI
+ *                                    device is a PCI bridge
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get the device info for a single PCI device object. Get the
+ *              _ADR (contains PCI device and function numbers), and for PCI
+ *              bridge devices, get the bus number from PCI configuration
+ *              space.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id,
+			    acpi_handle pci_device,
+			    u16 *bus_number, u8 *is_bridge)
+{
+	acpi_status status;
+	acpi_object_type object_type;
+	u64 return_value;
+	u64 pci_value;
+
+	/* We only care about objects of type Device */
+
+	status = acpi_get_type(pci_device, &object_type);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	if (object_type != ACPI_TYPE_DEVICE) {
+		return (AE_OK);
+	}
+
+	/* We need an _ADR. Ignore device if not present */
+
+	status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
+						 pci_device, &return_value);
+	if (ACPI_FAILURE(status)) {
+		return (AE_OK);
+	}
+
+	/*
+	 * From _ADR, get the PCI Device and Function and
+	 * update the PCI ID.
+	 */
+	pci_id->device = ACPI_HIWORD(ACPI_LODWORD(return_value));
+	pci_id->function = ACPI_LOWORD(ACPI_LODWORD(return_value));
+
+	/*
+	 * If the previous device was a bridge, use the previous
+	 * device bus number
+	 */
+	if (*is_bridge) {
+		pci_id->bus = *bus_number;
+	}
+
+	/*
+	 * Get the bus numbers from PCI Config space:
+	 *
+	 * First, get the PCI header_type
+	 */
+	*is_bridge = FALSE;
+	status = acpi_os_read_pci_configuration(pci_id,
+						PCI_CFG_HEADER_TYPE_REG,
+						&pci_value, 8);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* We only care about bridges (1=pci_bridge, 2=card_bus_bridge) */
+
+	pci_value &= PCI_HEADER_TYPE_MASK;
+
+	if ((pci_value != PCI_TYPE_BRIDGE) &&
+	    (pci_value != PCI_TYPE_CARDBUS_BRIDGE)) {
+		return (AE_OK);
+	}
+
+	/* Bridge: Get the Primary bus_number */
+
+	status = acpi_os_read_pci_configuration(pci_id,
+						PCI_CFG_PRIMARY_BUS_NUMBER_REG,
+						&pci_value, 8);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	*is_bridge = TRUE;
+	pci_id->bus = (u16)pci_value;
+
+	/* Bridge: Get the Secondary bus_number */
+
+	status = acpi_os_read_pci_configuration(pci_id,
+						PCI_CFG_SECONDARY_BUS_NUMBER_REG,
+						&pci_value, 8);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	*bus_number = (u16)pci_value;
+	return (AE_OK);
+}