ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 1088 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
new file mode 100644
index 00000000000..fd6648f0d65
--- /dev/null
+++ b/drivers/acpi/acpica/psloop.c
@@ -0,0 +1,1088 @@
+/******************************************************************************
+ *
+ * Module Name: psloop - Main AML parse loop
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * Parse the AML and build an operation tree as most interpreters, (such as
+ * Perl) do. Parsing is done by hand rather than with a YACC generated parser
+ * to tightly constrain stack and dynamic memory usage. Parsing is kept
+ * flexible and the code fairly compact by parsing based on a list of AML
+ * opcode templates in aml_op_info[].
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/accommon.h>
+#include <acpi/acparser.h>
+#include <acpi/acdispat.h>
+#include <acpi/amlcode.h>
+
+#define _COMPONENT          ACPI_PARSER
+ACPI_MODULE_NAME("psloop")
+
+static u32 acpi_gbl_depth = 0;
+
+/* Local prototypes */
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
+
+static acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+		       u8 * aml_op_start,
+		       union acpi_parse_object *unnamed_op,
+		       union acpi_parse_object **op);
+
+static acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+		  u8 * aml_op_start, union acpi_parse_object **new_op);
+
+static acpi_status
+acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
+		      u8 * aml_op_start, union acpi_parse_object *op);
+
+static acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+		    union acpi_parse_object **op, acpi_status status);
+
+static acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+			  union acpi_parse_object *op, acpi_status status);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_get_aml_opcode
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Extract the next AML opcode from the input stream.
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
+{
+
+	ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
+
+	walk_state->aml_offset =
+	    (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
+				walk_state->parser_state.aml_start);
+	walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
+
+	/*
+	 * First cut to determine what we have found:
+	 * 1) A valid AML opcode
+	 * 2) A name string
+	 * 3) An unknown/invalid opcode
+	 */
+	walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+
+	switch (walk_state->op_info->class) {
+	case AML_CLASS_ASCII:
+	case AML_CLASS_PREFIX:
+		/*
+		 * Starts with a valid prefix or ASCII char, this is a name
+		 * string. Convert the bare name string to a namepath.
+		 */
+		walk_state->opcode = AML_INT_NAMEPATH_OP;
+		walk_state->arg_types = ARGP_NAMESTRING;
+		break;
+
+	case AML_CLASS_UNKNOWN:
+
+		/* The opcode is unrecognized. Just skip unknown opcodes */
+
+		ACPI_ERROR((AE_INFO,
+			    "Found unknown opcode %X at AML address %p offset %X, ignoring",
+			    walk_state->opcode, walk_state->parser_state.aml,
+			    walk_state->aml_offset));
+
+		ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+
+		/* Assume one-byte bad opcode */
+
+		walk_state->parser_state.aml++;
+		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+
+	default:
+
+		/* Found opcode info, this is a normal opcode */
+
+		walk_state->parser_state.aml +=
+		    acpi_ps_get_opcode_size(walk_state->opcode);
+		walk_state->arg_types = walk_state->op_info->parse_args;
+		break;
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_build_named_op
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              aml_op_start        - Begin of named Op in AML
+ *              unnamed_op          - Early Op (not a named Op)
+ *              Op                  - Returned Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Parse a named Op
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+		       u8 * aml_op_start,
+		       union acpi_parse_object *unnamed_op,
+		       union acpi_parse_object **op)
+{
+	acpi_status status = AE_OK;
+	union acpi_parse_object *arg = NULL;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
+
+	unnamed_op->common.value.arg = NULL;
+	unnamed_op->common.arg_list_length = 0;
+	unnamed_op->common.aml_opcode = walk_state->opcode;
+
+	/*
+	 * Get and append arguments until we find the node that contains
+	 * the name (the type ARGP_NAME).
+	 */
+	while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
+	       (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
+		status =
+		    acpi_ps_get_next_arg(walk_state,
+					 &(walk_state->parser_state),
+					 GET_CURRENT_ARG_TYPE(walk_state->
+							      arg_types), &arg);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		acpi_ps_append_arg(unnamed_op, arg);
+		INCREMENT_ARG_LIST(walk_state->arg_types);
+	}
+
+	/*
+	 * Make sure that we found a NAME and didn't run out of arguments
+	 */
+	if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
+		return_ACPI_STATUS(AE_AML_NO_OPERAND);
+	}
+
+	/* We know that this arg is a name, move to next arg */
+
+	INCREMENT_ARG_LIST(walk_state->arg_types);
+
+	/*
+	 * Find the object. This will either insert the object into
+	 * the namespace or simply look it up
+	 */
+	walk_state->op = NULL;
+
+	status = walk_state->descending_callback(walk_state, op);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
+		return_ACPI_STATUS(status);
+	}
+
+	if (!*op) {
+		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+	}
+
+	status = acpi_ps_next_parse_state(walk_state, *op, status);
+	if (ACPI_FAILURE(status)) {
+		if (status == AE_CTRL_PENDING) {
+			return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
+		}
+		return_ACPI_STATUS(status);
+	}
+
+	acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
+	acpi_gbl_depth++;
+
+	if ((*op)->common.aml_opcode == AML_REGION_OP ||
+	    (*op)->common.aml_opcode == AML_DATA_REGION_OP) {
+		/*
+		 * Defer final parsing of an operation_region body, because we don't
+		 * have enough info in the first pass to parse it correctly (i.e.,
+		 * there may be method calls within the term_arg elements of the body.)
+		 *
+		 * However, we must continue parsing because the opregion is not a
+		 * standalone package -- we don't know where the end is at this point.
+		 *
+		 * (Length is unknown until parse of the body complete)
+		 */
+		(*op)->named.data = aml_op_start;
+		(*op)->named.length = 0;
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_create_op
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              aml_op_start        - Op start in AML
+ *              new_op              - Returned Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get Op from AML
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+		  u8 * aml_op_start, union acpi_parse_object **new_op)
+{
+	acpi_status status = AE_OK;
+	union acpi_parse_object *op;
+	union acpi_parse_object *named_op = NULL;
+	union acpi_parse_object *parent_scope;
+	u8 argument_count;
+	const struct acpi_opcode_info *op_info;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
+
+	status = acpi_ps_get_aml_opcode(walk_state);
+	if (status == AE_CTRL_PARSE_CONTINUE) {
+		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+	}
+
+	/* Create Op structure and append to parent's argument list */
+
+	walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+	op = acpi_ps_alloc_op(walk_state->opcode);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	if (walk_state->op_info->flags & AML_NAMED) {
+		status =
+		    acpi_ps_build_named_op(walk_state, aml_op_start, op,
+					   &named_op);
+		acpi_ps_free_op(op);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		*new_op = named_op;
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Not a named opcode, just allocate Op and append to parent */
+
+	if (walk_state->op_info->flags & AML_CREATE) {
+		/*
+		 * Backup to beginning of create_xXXfield declaration
+		 * body_length is unknown until we parse the body
+		 */
+		op->named.data = aml_op_start;
+		op->named.length = 0;
+	}
+
+	if (walk_state->opcode == AML_BANK_FIELD_OP) {
+		/*
+		 * Backup to beginning of bank_field declaration
+		 * body_length is unknown until we parse the body
+		 */
+		op->named.data = aml_op_start;
+		op->named.length = 0;
+	}
+
+	parent_scope = acpi_ps_get_parent_scope(&(walk_state->parser_state));
+	acpi_ps_append_arg(parent_scope, op);
+
+	if (parent_scope) {
+		op_info =
+		    acpi_ps_get_opcode_info(parent_scope->common.aml_opcode);
+		if (op_info->flags & AML_HAS_TARGET) {
+			argument_count =
+			    acpi_ps_get_argument_count(op_info->type);
+			if (parent_scope->common.arg_list_length >
+			    argument_count) {
+				op->common.flags |= ACPI_PARSEOP_TARGET;
+			}
+		} else if (parent_scope->common.aml_opcode == AML_INCREMENT_OP) {
+			op->common.flags |= ACPI_PARSEOP_TARGET;
+		}
+	}
+
+	if (walk_state->descending_callback != NULL) {
+		/*
+		 * Find the object. This will either insert the object into
+		 * the namespace or simply look it up
+		 */
+		walk_state->op = *new_op = op;
+
+		status = walk_state->descending_callback(walk_state, &op);
+		status = acpi_ps_next_parse_state(walk_state, op, status);
+		if (status == AE_CTRL_PENDING) {
+			status = AE_CTRL_PARSE_PENDING;
+		}
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_get_arguments
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              aml_op_start        - Op start in AML
+ *              Op                  - Current Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get arguments for passed Op.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
+		      u8 * aml_op_start, union acpi_parse_object *op)
+{
+	acpi_status status = AE_OK;
+	union acpi_parse_object *arg = NULL;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
+
+	switch (op->common.aml_opcode) {
+	case AML_BYTE_OP:	/* AML_BYTEDATA_ARG */
+	case AML_WORD_OP:	/* AML_WORDDATA_ARG */
+	case AML_DWORD_OP:	/* AML_DWORDATA_ARG */
+	case AML_QWORD_OP:	/* AML_QWORDATA_ARG */
+	case AML_STRING_OP:	/* AML_ASCIICHARLIST_ARG */
+
+		/* Fill in constant or string argument directly */
+
+		acpi_ps_get_next_simple_arg(&(walk_state->parser_state),
+					    GET_CURRENT_ARG_TYPE(walk_state->
+								 arg_types),
+					    op);
+		break;
+
+	case AML_INT_NAMEPATH_OP:	/* AML_NAMESTRING_ARG */
+
+		status =
+		    acpi_ps_get_next_namepath(walk_state,
+					      &(walk_state->parser_state), op,
+					      1);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		walk_state->arg_types = 0;
+		break;
+
+	default:
+		/*
+		 * Op is not a constant or string, append each argument to the Op
+		 */
+		while (GET_CURRENT_ARG_TYPE(walk_state->arg_types)
+		       && !walk_state->arg_count) {
+			walk_state->aml_offset =
+			    (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
+						walk_state->parser_state.
+						aml_start);
+
+			status =
+			    acpi_ps_get_next_arg(walk_state,
+						 &(walk_state->parser_state),
+						 GET_CURRENT_ARG_TYPE
+						 (walk_state->arg_types), &arg);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+
+			if (arg) {
+				arg->common.aml_offset = walk_state->aml_offset;
+				acpi_ps_append_arg(op, arg);
+			}
+
+			INCREMENT_ARG_LIST(walk_state->arg_types);
+		}
+
+		/* Special processing for certain opcodes */
+
+		/* TBD (remove): Temporary mechanism to disable this code if needed */
+
+#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
+
+		if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) &&
+		    ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
+			/*
+			 * We want to skip If/Else/While constructs during Pass1 because we
+			 * want to actually conditionally execute the code during Pass2.
+			 *
+			 * Except for disassembly, where we always want to walk the
+			 * If/Else/While packages
+			 */
+			switch (op->common.aml_opcode) {
+			case AML_IF_OP:
+			case AML_ELSE_OP:
+			case AML_WHILE_OP:
+
+				ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+						  "Pass1: Skipping an If/Else/While body\n"));
+
+				/* Skip body of if/else/while in pass 1 */
+
+				walk_state->parser_state.aml =
+				    walk_state->parser_state.pkg_end;
+				walk_state->arg_count = 0;
+				break;
+
+			default:
+				break;
+			}
+		}
+#endif
+
+		switch (op->common.aml_opcode) {
+		case AML_METHOD_OP:
+			/*
+			 * Skip parsing of control method because we don't have enough
+			 * info in the first pass to parse it correctly.
+			 *
+			 * Save the length and address of the body
+			 */
+			op->named.data = walk_state->parser_state.aml;
+			op->named.length = (u32)
+			    (walk_state->parser_state.pkg_end -
+			     walk_state->parser_state.aml);
+
+			/* Skip body of method */
+
+			walk_state->parser_state.aml =
+			    walk_state->parser_state.pkg_end;
+			walk_state->arg_count = 0;
+			break;
+
+		case AML_BUFFER_OP:
+		case AML_PACKAGE_OP:
+		case AML_VAR_PACKAGE_OP:
+
+			if ((op->common.parent) &&
+			    (op->common.parent->common.aml_opcode ==
+			     AML_NAME_OP)
+			    && (walk_state->pass_number <=
+				ACPI_IMODE_LOAD_PASS2)) {
+				/*
+				 * Skip parsing of Buffers and Packages because we don't have
+				 * enough info in the first pass to parse them correctly.
+				 */
+				op->named.data = aml_op_start;
+				op->named.length = (u32)
+				    (walk_state->parser_state.pkg_end -
+				     aml_op_start);
+
+				/* Skip body */
+
+				walk_state->parser_state.aml =
+				    walk_state->parser_state.pkg_end;
+				walk_state->arg_count = 0;
+			}
+			break;
+
+		case AML_WHILE_OP:
+
+			if (walk_state->control_state) {
+				walk_state->control_state->control.package_end =
+				    walk_state->parser_state.pkg_end;
+			}
+			break;
+
+		default:
+
+			/* No action for all other opcodes */
+			break;
+		}
+
+		break;
+	}
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_complete_op
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              Op                  - Returned Op
+ *              Status              - Parse status before complete Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Complete Op
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+		    union acpi_parse_object **op, acpi_status status)
+{
+	acpi_status status2;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
+
+	/*
+	 * Finished one argument of the containing scope
+	 */
+	walk_state->parser_state.scope->parse_scope.arg_count--;
+
+	/* Close this Op (will result in parse subtree deletion) */
+
+	status2 = acpi_ps_complete_this_op(walk_state, *op);
+	if (ACPI_FAILURE(status2)) {
+		return_ACPI_STATUS(status2);
+	}
+
+	*op = NULL;
+
+	switch (status) {
+	case AE_OK:
+		break;
+
+	case AE_CTRL_TRANSFER:
+
+		/* We are about to transfer to a called method */
+
+		walk_state->prev_op = NULL;
+		walk_state->prev_arg_types = walk_state->arg_types;
+		return_ACPI_STATUS(status);
+
+	case AE_CTRL_END:
+
+		acpi_ps_pop_scope(&(walk_state->parser_state), op,
+				  &walk_state->arg_types,
+				  &walk_state->arg_count);
+
+		if (*op) {
+			walk_state->op = *op;
+			walk_state->op_info =
+			    acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+			walk_state->opcode = (*op)->common.aml_opcode;
+
+			status = walk_state->ascending_callback(walk_state);
+			status =
+			    acpi_ps_next_parse_state(walk_state, *op, status);
+
+			status2 = acpi_ps_complete_this_op(walk_state, *op);
+			if (ACPI_FAILURE(status2)) {
+				return_ACPI_STATUS(status2);
+			}
+		}
+
+		status = AE_OK;
+		break;
+
+	case AE_CTRL_BREAK:
+	case AE_CTRL_CONTINUE:
+
+		/* Pop off scopes until we find the While */
+
+		while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
+			acpi_ps_pop_scope(&(walk_state->parser_state), op,
+					  &walk_state->arg_types,
+					  &walk_state->arg_count);
+		}
+
+		/* Close this iteration of the While loop */
+
+		walk_state->op = *op;
+		walk_state->op_info =
+		    acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+		walk_state->opcode = (*op)->common.aml_opcode;
+
+		status = walk_state->ascending_callback(walk_state);
+		status = acpi_ps_next_parse_state(walk_state, *op, status);
+
+		status2 = acpi_ps_complete_this_op(walk_state, *op);
+		if (ACPI_FAILURE(status2)) {
+			return_ACPI_STATUS(status2);
+		}
+
+		status = AE_OK;
+		break;
+
+	case AE_CTRL_TERMINATE:
+
+		/* Clean up */
+		do {
+			if (*op) {
+				status2 =
+				    acpi_ps_complete_this_op(walk_state, *op);
+				if (ACPI_FAILURE(status2)) {
+					return_ACPI_STATUS(status2);
+				}
+
+				acpi_ut_delete_generic_state
+				    (acpi_ut_pop_generic_state
+				     (&walk_state->control_state));
+			}
+
+			acpi_ps_pop_scope(&(walk_state->parser_state), op,
+					  &walk_state->arg_types,
+					  &walk_state->arg_count);
+
+		} while (*op);
+
+		return_ACPI_STATUS(AE_OK);
+
+	default:		/* All other non-AE_OK status */
+
+		do {
+			if (*op) {
+				status2 =
+				    acpi_ps_complete_this_op(walk_state, *op);
+				if (ACPI_FAILURE(status2)) {
+					return_ACPI_STATUS(status2);
+				}
+			}
+
+			acpi_ps_pop_scope(&(walk_state->parser_state), op,
+					  &walk_state->arg_types,
+					  &walk_state->arg_count);
+
+		} while (*op);
+
+#if 0
+		/*
+		 * TBD: Cleanup parse ops on error
+		 */
+		if (*op == NULL) {
+			acpi_ps_pop_scope(parser_state, op,
+					  &walk_state->arg_types,
+					  &walk_state->arg_count);
+		}
+#endif
+		walk_state->prev_op = NULL;
+		walk_state->prev_arg_types = walk_state->arg_types;
+		return_ACPI_STATUS(status);
+	}
+
+	/* This scope complete? */
+
+	if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
+		acpi_ps_pop_scope(&(walk_state->parser_state), op,
+				  &walk_state->arg_types,
+				  &walk_state->arg_count);
+		ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
+	} else {
+		*op = NULL;
+	}
+
+	ACPI_PREEMPTION_POINT();
+
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_complete_final_op
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *              Op                  - Current Op
+ *              Status              - Current parse status before complete last
+ *                                    Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Complete last Op.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+			  union acpi_parse_object *op, acpi_status status)
+{
+	acpi_status status2;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
+
+	/*
+	 * Complete the last Op (if not completed), and clear the scope stack.
+	 * It is easily possible to end an AML "package" with an unbounded number
+	 * of open scopes (such as when several ASL blocks are closed with
+	 * sequential closing braces). We want to terminate each one cleanly.
+	 */
+	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
+			  op));
+	do {
+		if (op) {
+			if (walk_state->ascending_callback != NULL) {
+				walk_state->op = op;
+				walk_state->op_info =
+				    acpi_ps_get_opcode_info(op->common.
+							    aml_opcode);
+				walk_state->opcode = op->common.aml_opcode;
+
+				status =
+				    walk_state->ascending_callback(walk_state);
+				status =
+				    acpi_ps_next_parse_state(walk_state, op,
+							     status);
+				if (status == AE_CTRL_PENDING) {
+					status =
+					    acpi_ps_complete_op(walk_state, &op,
+								AE_OK);
+					if (ACPI_FAILURE(status)) {
+						return_ACPI_STATUS(status);
+					}
+				}
+
+				if (status == AE_CTRL_TERMINATE) {
+					status = AE_OK;
+
+					/* Clean up */
+					do {
+						if (op) {
+							status2 =
+							    acpi_ps_complete_this_op
+							    (walk_state, op);
+							if (ACPI_FAILURE
+							    (status2)) {
+								return_ACPI_STATUS
+								    (status2);
+							}
+						}
+
+						acpi_ps_pop_scope(&
+								  (walk_state->
+								   parser_state),
+								  &op,
+								  &walk_state->
+								  arg_types,
+								  &walk_state->
+								  arg_count);
+
+					} while (op);
+
+					return_ACPI_STATUS(status);
+				}
+
+				else if (ACPI_FAILURE(status)) {
+
+					/* First error is most important */
+
+					(void)
+					    acpi_ps_complete_this_op(walk_state,
+								     op);
+					return_ACPI_STATUS(status);
+				}
+			}
+
+			status2 = acpi_ps_complete_this_op(walk_state, op);
+			if (ACPI_FAILURE(status2)) {
+				return_ACPI_STATUS(status2);
+			}
+		}
+
+		acpi_ps_pop_scope(&(walk_state->parser_state), &op,
+				  &walk_state->arg_types,
+				  &walk_state->arg_count);
+
+	} while (op);
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_parse_loop
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Parse AML (pointed to by the current parser state) and return
+ *              a tree of ops.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_parse_object *op = NULL;	/* current op */
+	struct acpi_parse_state *parser_state;
+	u8 *aml_op_start = NULL;
+
+	ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state);
+
+	if (walk_state->descending_callback == NULL) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	parser_state = &walk_state->parser_state;
+	walk_state->arg_types = 0;
+
+#if (!defined (ACPI_NO_METHOD_EXECUTION) && !defined (ACPI_CONSTANT_EVAL_ONLY))
+
+	if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
+
+		/* We are restarting a preempted control method */
+
+		if (acpi_ps_has_completed_scope(parser_state)) {
+			/*
+			 * We must check if a predicate to an IF or WHILE statement
+			 * was just completed
+			 */
+			if ((parser_state->scope->parse_scope.op) &&
+			    ((parser_state->scope->parse_scope.op->common.
+			      aml_opcode == AML_IF_OP)
+			     || (parser_state->scope->parse_scope.op->common.
+				 aml_opcode == AML_WHILE_OP))
+			    && (walk_state->control_state)
+			    && (walk_state->control_state->common.state ==
+				ACPI_CONTROL_PREDICATE_EXECUTING)) {
+				/*
+				 * A predicate was just completed, get the value of the
+				 * predicate and branch based on that value
+				 */
+				walk_state->op = NULL;
+				status =
+				    acpi_ds_get_predicate_value(walk_state,
+								ACPI_TO_POINTER
+								(TRUE));
+				if (ACPI_FAILURE(status)
+				    && ((status & AE_CODE_MASK) !=
+					AE_CODE_CONTROL)) {
+					if (status == AE_AML_NO_RETURN_VALUE) {
+						ACPI_EXCEPTION((AE_INFO, status,
+								"Invoked method did not return a value"));
+
+					}
+
+					ACPI_EXCEPTION((AE_INFO, status,
+							"GetPredicate Failed"));
+					return_ACPI_STATUS(status);
+				}
+
+				status =
+				    acpi_ps_next_parse_state(walk_state, op,
+							     status);
+			}
+
+			acpi_ps_pop_scope(parser_state, &op,
+					  &walk_state->arg_types,
+					  &walk_state->arg_count);
+			ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+					  "Popped scope, Op=%p\n", op));
+		} else if (walk_state->prev_op) {
+
+			/* We were in the middle of an op */
+
+			op = walk_state->prev_op;
+			walk_state->arg_types = walk_state->prev_arg_types;
+		}
+	}
+#endif
+
+	/* Iterative parsing loop, while there is more AML to process: */
+
+	while ((parser_state->aml < parser_state->aml_end) || (op)) {
+		aml_op_start = parser_state->aml;
+		if (!op) {
+			status =
+			    acpi_ps_create_op(walk_state, aml_op_start, &op);
+			if (ACPI_FAILURE(status)) {
+				if (status == AE_CTRL_PARSE_CONTINUE) {
+					continue;
+				}
+
+				if (status == AE_CTRL_PARSE_PENDING) {
+					status = AE_OK;
+				}
+
+				status =
+				    acpi_ps_complete_op(walk_state, &op,
+							status);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+
+				continue;
+			}
+
+			op->common.aml_offset = walk_state->aml_offset;
+
+			if (walk_state->op_info) {
+				ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+						  "Opcode %4.4X [%s] Op %p Aml %p AmlOffset %5.5X\n",
+						  (u32) op->common.aml_opcode,
+						  walk_state->op_info->name, op,
+						  parser_state->aml,
+						  op->common.aml_offset));
+			}
+		}
+
+		/*
+		 * Start arg_count at zero because we don't know if there are
+		 * any args yet
+		 */
+		walk_state->arg_count = 0;
+
+		/* Are there any arguments that must be processed? */
+
+		if (walk_state->arg_types) {
+
+			/* Get arguments */
+
+			status =
+			    acpi_ps_get_arguments(walk_state, aml_op_start, op);
+			if (ACPI_FAILURE(status)) {
+				status =
+				    acpi_ps_complete_op(walk_state, &op,
+							status);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+
+				continue;
+			}
+		}
+
+		/* Check for arguments that need to be processed */
+
+		if (walk_state->arg_count) {
+			/*
+			 * There are arguments (complex ones), push Op and
+			 * prepare for argument
+			 */
+			status = acpi_ps_push_scope(parser_state, op,
+						    walk_state->arg_types,
+						    walk_state->arg_count);
+			if (ACPI_FAILURE(status)) {
+				status =
+				    acpi_ps_complete_op(walk_state, &op,
+							status);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+
+				continue;
+			}
+
+			op = NULL;
+			continue;
+		}
+
+		/*
+		 * All arguments have been processed -- Op is complete,
+		 * prepare for next
+		 */
+		walk_state->op_info =
+		    acpi_ps_get_opcode_info(op->common.aml_opcode);
+		if (walk_state->op_info->flags & AML_NAMED) {
+			if (acpi_gbl_depth) {
+				acpi_gbl_depth--;
+			}
+
+			if (op->common.aml_opcode == AML_REGION_OP ||
+			    op->common.aml_opcode == AML_DATA_REGION_OP) {
+				/*
+				 * Skip parsing of control method or opregion body,
+				 * because we don't have enough info in the first pass
+				 * to parse them correctly.
+				 *
+				 * Completed parsing an op_region declaration, we now
+				 * know the length.
+				 */
+				op->named.length =
+				    (u32) (parser_state->aml - op->named.data);
+			}
+		}
+
+		if (walk_state->op_info->flags & AML_CREATE) {
+			/*
+			 * Backup to beginning of create_xXXfield declaration (1 for
+			 * Opcode)
+			 *
+			 * body_length is unknown until we parse the body
+			 */
+			op->named.length =
+			    (u32) (parser_state->aml - op->named.data);
+		}
+
+		if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
+			/*
+			 * Backup to beginning of bank_field declaration
+			 *
+			 * body_length is unknown until we parse the body
+			 */
+			op->named.length =
+			    (u32) (parser_state->aml - op->named.data);
+		}
+
+		/* This op complete, notify the dispatcher */
+
+		if (walk_state->ascending_callback != NULL) {
+			walk_state->op = op;
+			walk_state->opcode = op->common.aml_opcode;
+
+			status = walk_state->ascending_callback(walk_state);
+			status =
+			    acpi_ps_next_parse_state(walk_state, op, status);
+			if (status == AE_CTRL_PENDING) {
+				status = AE_OK;
+			}
+		}
+
+		status = acpi_ps_complete_op(walk_state, &op, status);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+	}			/* while parser_state->Aml */
+
+	status = acpi_ps_complete_final_op(walk_state, op, status);
+	return_ACPI_STATUS(status);
+}