ACPICA: Source restructuring: split large files into 8 new files.

Created logical splits for eight new files. Improves modularity
and configurability.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 218 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/utownerid.c b/drivers/acpi/acpica/utownerid.c
new file mode 100644
index 00000000000..6b42e633016
--- /dev/null
+++ b/drivers/acpi/acpica/utownerid.c
@@ -0,0 +1,218 @@
+/*******************************************************************************
+ *
+ * Module Name: utownerid - Support for Table/Method Owner IDs
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utownerid")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_allocate_owner_id
+ *
+ * PARAMETERS:  owner_id        - Where the new owner ID is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
+ *              track objects created by the table or method, to be deleted
+ *              when the method exits or the table is unloaded.
+ *
+ ******************************************************************************/
+acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
+{
+	u32 i;
+	u32 j;
+	u32 k;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
+
+	/* Guard against multiple allocations of ID to the same location */
+
+	if (*owner_id) {
+		ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
+			    *owner_id));
+		return_ACPI_STATUS(AE_ALREADY_EXISTS);
+	}
+
+	/* Mutex for the global ID mask */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Find a free owner ID, cycle through all possible IDs on repeated
+	 * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
+	 * to be scanned twice.
+	 */
+	for (i = 0, j = acpi_gbl_last_owner_id_index;
+	     i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
+		if (j >= ACPI_NUM_OWNERID_MASKS) {
+			j = 0;	/* Wraparound to start of mask array */
+		}
+
+		for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
+			if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
+
+				/* There are no free IDs in this mask */
+
+				break;
+			}
+
+			if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
+				/*
+				 * Found a free ID. The actual ID is the bit index plus one,
+				 * making zero an invalid Owner ID. Save this as the last ID
+				 * allocated and update the global ID mask.
+				 */
+				acpi_gbl_owner_id_mask[j] |= (1 << k);
+
+				acpi_gbl_last_owner_id_index = (u8)j;
+				acpi_gbl_next_owner_id_offset = (u8)(k + 1);
+
+				/*
+				 * Construct encoded ID from the index and bit position
+				 *
+				 * Note: Last [j].k (bit 255) is never used and is marked
+				 * permanently allocated (prevents +1 overflow)
+				 */
+				*owner_id =
+				    (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
+
+				ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
+						  "Allocated OwnerId: %2.2X\n",
+						  (unsigned int)*owner_id));
+				goto exit;
+			}
+		}
+
+		acpi_gbl_next_owner_id_offset = 0;
+	}
+
+	/*
+	 * All owner_ids have been allocated. This typically should
+	 * not happen since the IDs are reused after deallocation. The IDs are
+	 * allocated upon table load (one per table) and method execution, and
+	 * they are released when a table is unloaded or a method completes
+	 * execution.
+	 *
+	 * If this error happens, there may be very deep nesting of invoked control
+	 * methods, or there may be a bug where the IDs are not released.
+	 */
+	status = AE_OWNER_ID_LIMIT;
+	ACPI_ERROR((AE_INFO,
+		    "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
+
+      exit:
+	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_release_owner_id
+ *
+ * PARAMETERS:  owner_id_ptr        - Pointer to a previously allocated owner_ID
+ *
+ * RETURN:      None. No error is returned because we are either exiting a
+ *              control method or unloading a table. Either way, we would
+ *              ignore any error anyway.
+ *
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ *
+ ******************************************************************************/
+
+void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
+{
+	acpi_owner_id owner_id = *owner_id_ptr;
+	acpi_status status;
+	u32 index;
+	u32 bit;
+
+	ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
+
+	/* Always clear the input owner_id (zero is an invalid ID) */
+
+	*owner_id_ptr = 0;
+
+	/* Zero is not a valid owner_ID */
+
+	if (owner_id == 0) {
+		ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
+		return_VOID;
+	}
+
+	/* Mutex for the global ID mask */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return_VOID;
+	}
+
+	/* Normalize the ID to zero */
+
+	owner_id--;
+
+	/* Decode ID to index/offset pair */
+
+	index = ACPI_DIV_32(owner_id);
+	bit = 1 << ACPI_MOD_32(owner_id);
+
+	/* Free the owner ID only if it is valid */
+
+	if (acpi_gbl_owner_id_mask[index] & bit) {
+		acpi_gbl_owner_id_mask[index] ^= bit;
+	} else {
+		ACPI_ERROR((AE_INFO,
+			    "Release of non-allocated OwnerId: 0x%2.2X",
+			    owner_id + 1));
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	return_VOID;
+}