ACPI: ACPICA 20060421

Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 23 insertions, 17 deletions

diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
index 916234bf811..44d064f427b 100644
--- a/drivers/acpi/executer/exprep.c
+++ b/drivers/acpi/executer/exprep.c
@@ -97,7 +97,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 	u32 minimum_accesses = 0xFFFFFFFF;
 	u32 accesses;
 
-	ACPI_FUNCTION_TRACE("ex_generate_access");
+	ACPI_FUNCTION_TRACE(ex_generate_access);
 
 	/* Round Field start offset and length to "minimal" byte boundaries */
 
@@ -146,7 +146,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 			accesses = field_end_offset - field_start_offset;
 
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "access_width %d end is within region\n",
+					  "AccessWidth %d end is within region\n",
 					  access_byte_width));
 
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
@@ -173,7 +173,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 			}
 		} else {
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "access_width %d end is NOT within region\n",
+					  "AccessWidth %d end is NOT within region\n",
 					  access_byte_width));
 			if (access_byte_width == 1) {
 				ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
@@ -228,7 +228,7 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc,
 	u32 byte_alignment;
 	u32 bit_length;
 
-	ACPI_FUNCTION_TRACE("ex_decode_field_access");
+	ACPI_FUNCTION_TRACE(ex_decode_field_access);
 
 	access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
 
@@ -322,7 +322,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
 	u32 byte_alignment;
 	u32 nearest_byte_address;
 
-	ACPI_FUNCTION_TRACE("ex_prep_common_field_object");
+	ACPI_FUNCTION_TRACE(ex_prep_common_field_object);
 
 	/*
 	 * Note: the structure being initialized is the
@@ -415,13 +415,13 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 	u32 type;
 	acpi_status status;
 
-	ACPI_FUNCTION_TRACE("ex_prep_field_value");
+	ACPI_FUNCTION_TRACE(ex_prep_field_value);
 
 	/* Parameter validation */
 
 	if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
 		if (!info->region_node) {
-			ACPI_ERROR((AE_INFO, "Null region_node"));
+			ACPI_ERROR((AE_INFO, "Null RegionNode"));
 			return_ACPI_STATUS(AE_AML_NO_OPERAND);
 		}
 
@@ -467,7 +467,7 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 		acpi_ut_add_reference(obj_desc->field.region_obj);
 
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-				  "region_field: bit_off %X, Off %X, Gran %X, Region %p\n",
+				  "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
 				  obj_desc->field.start_field_bit_offset,
 				  obj_desc->field.base_byte_offset,
 				  obj_desc->field.access_byte_width,
@@ -488,7 +488,7 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 		acpi_ut_add_reference(obj_desc->bank_field.bank_obj);
 
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-				  "Bank Field: bit_off %X, Off %X, Gran %X, Region %p, bank_reg %p\n",
+				  "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
 				  obj_desc->bank_field.start_field_bit_offset,
 				  obj_desc->bank_field.base_byte_offset,
 				  obj_desc->field.access_byte_width,
@@ -519,23 +519,29 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 		acpi_ut_add_reference(obj_desc->index_field.index_obj);
 
 		/*
-		 * February 2006: Changed to match MS behavior
+		 * April 2006: Changed to match MS behavior
 		 *
 		 * The value written to the Index register is the byte offset of the
-		 * target field.
+		 * target field in units of the granularity of the index_field
 		 *
 		 * Previously, the value was calculated as an index in terms of the
 		 * width of the Data register, as below:
 		 *
-		 *   obj_desc->index_field.Value = (u32)
-		 *       (Info->field_bit_position / ACPI_MUL_8 (
-		 *           obj_desc->Field.access_byte_width));
+		 *      obj_desc->index_field.Value = (u32)
+		 *          (Info->field_bit_position / ACPI_MUL_8 (
+		 *              obj_desc->Field.access_byte_width));
+		 *
+		 * February 2006: Tried value as a byte offset:
+		 *      obj_desc->index_field.Value = (u32)
+		 *          ACPI_DIV_8 (Info->field_bit_position);
 		 */
 		obj_desc->index_field.value =
-		    (u32) ACPI_DIV_8(info->field_bit_position);
+		    (u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position),
+					  obj_desc->index_field.
+					  access_byte_width);
 
 		ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-				  "index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
+				  "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
 				  obj_desc->index_field.start_field_bit_offset,
 				  obj_desc->index_field.base_byte_offset,
 				  obj_desc->index_field.value,
@@ -557,7 +563,7 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 				       acpi_ns_get_type(info->field_node));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-			  "Set named_obj %p [%4.4s], obj_desc %p\n",
+			  "Set NamedObj %p [%4.4s], ObjDesc %p\n",
 			  info->field_node,
 			  acpi_ut_get_node_name(info->field_node), obj_desc));