ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 0 insertions, 629 deletions

diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
deleted file mode 100644
index 54dd3ee0760..00000000000
--- a/drivers/acpi/hardware/hwsleep.c
+++ /dev/null
@@ -1,629 +0,0 @@
-
-/******************************************************************************
- *
- * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT          ACPI_HARDWARE
-ACPI_MODULE_NAME("hwsleep")
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_set_firmware_waking_vector
- *
- * PARAMETERS:  physical_address    - 32-bit physical address of ACPI real mode
- *                                    entry point.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Sets the 32-bit firmware_waking_vector field of the FACS
- *
- ******************************************************************************/
-acpi_status
-acpi_set_firmware_waking_vector(u32 physical_address)
-{
-	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
-
-
-	/*
-	 * According to the ACPI specification 2.0c and later, the 64-bit
-	 * waking vector should be cleared and the 32-bit waking vector should
-	 * be used, unless we want the wake-up code to be called by the BIOS in
-	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
-	 * to fail to resume if the 64-bit vector is used.
-	 */
-
-	/* Set the 32-bit vector */
-
-	acpi_gbl_FACS->firmware_waking_vector = physical_address;
-
-	/* Clear the 64-bit vector if it exists */
-
-	if ((acpi_gbl_FACS->length > 32) && (acpi_gbl_FACS->version >= 1)) {
-		acpi_gbl_FACS->xfirmware_waking_vector = 0;
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_set_firmware_waking_vector64
- *
- * PARAMETERS:  physical_address    - 64-bit physical address of ACPI protected
- *                                    mode entry point.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Sets the 64-bit X_firmware_waking_vector field of the FACS, if
- *              it exists in the table.
- *
- ******************************************************************************/
-acpi_status
-acpi_set_firmware_waking_vector64(u64 physical_address)
-{
-	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector64);
-
-
-	/* Determine if the 64-bit vector actually exists */
-
-	if ((acpi_gbl_FACS->length <= 32) || (acpi_gbl_FACS->version < 1)) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	/* Clear 32-bit vector, set the 64-bit X_ vector */
-
-	acpi_gbl_FACS->firmware_waking_vector = 0;
-	acpi_gbl_FACS->xfirmware_waking_vector = physical_address;
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector64)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_enter_sleep_state_prep
- *
- * PARAMETERS:  sleep_state         - Which sleep state to enter
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
- *              This function must execute with interrupts enabled.
- *              We break sleeping into 2 stages so that OSPM can handle
- *              various OS-specific tasks between the two steps.
- *
- ******************************************************************************/
-acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
-{
-	acpi_status status;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-
-	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
-
-	/*
-	 * _PSW methods could be run here to enable wake-on keyboard, LAN, etc.
-	 */
-	status = acpi_get_sleep_type_data(sleep_state,
-					  &acpi_gbl_sleep_type_a,
-					  &acpi_gbl_sleep_type_b);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Setup parameter object */
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
-
-	/* Run the _PTS method */
-
-	status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Setup the argument to _SST */
-
-	switch (sleep_state) {
-	case ACPI_STATE_S0:
-		arg.integer.value = ACPI_SST_WORKING;
-		break;
-
-	case ACPI_STATE_S1:
-	case ACPI_STATE_S2:
-	case ACPI_STATE_S3:
-		arg.integer.value = ACPI_SST_SLEEPING;
-		break;
-
-	case ACPI_STATE_S4:
-		arg.integer.value = ACPI_SST_SLEEP_CONTEXT;
-		break;
-
-	default:
-		arg.integer.value = ACPI_SST_INDICATOR_OFF;	/* Default is off */
-		break;
-	}
-
-	/*
-	 * Set the system indicators to show the desired sleep state.
-	 * _SST is an optional method (return no error if not found)
-	 */
-	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"While executing method _SST"));
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_enter_sleep_state
- *
- * PARAMETERS:  sleep_state         - Which sleep state to enter
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231)
- *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
- *
- ******************************************************************************/
-acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
-{
-	u32 PM1Acontrol;
-	u32 PM1Bcontrol;
-	struct acpi_bit_register_info *sleep_type_reg_info;
-	struct acpi_bit_register_info *sleep_enable_reg_info;
-	u32 in_value;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
-
-	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
-	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
-		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=%X B=%X",
-			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
-		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
-	}
-
-	sleep_type_reg_info =
-	    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
-	sleep_enable_reg_info =
-	    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
-
-	/* Clear wake status */
-
-	status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Clear all fixed and general purpose status bits */
-
-	status = acpi_hw_clear_acpi_status();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * 1) Disable/Clear all GPEs
-	 * 2) Enable all wakeup GPEs
-	 */
-	status = acpi_hw_disable_all_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-	acpi_gbl_system_awake_and_running = FALSE;
-
-	status = acpi_hw_enable_all_wakeup_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Execute the _GTS method */
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
-
-	status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Get current value of PM1A control */
-
-	status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-			  "Entering sleep state [S%d]\n", sleep_state));
-
-	/* Clear SLP_EN and SLP_TYP fields */
-
-	PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
-			 sleep_enable_reg_info->access_bit_mask);
-	PM1Bcontrol = PM1Acontrol;
-
-	/* Insert SLP_TYP bits */
-
-	PM1Acontrol |=
-	    (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position);
-	PM1Bcontrol |=
-	    (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position);
-
-	/*
-	 * We split the writes of SLP_TYP and SLP_EN to workaround
-	 * poorly implemented hardware.
-	 */
-
-	/* Write #1: fill in SLP_TYP data */
-
-	status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
-					PM1Acontrol);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
-					PM1Bcontrol);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Insert SLP_ENABLE bit */
-
-	PM1Acontrol |= sleep_enable_reg_info->access_bit_mask;
-	PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask;
-
-	/* Write #2: SLP_TYP + SLP_EN */
-
-	ACPI_FLUSH_CPU_CACHE();
-
-	status = acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
-					PM1Acontrol);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	status = acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
-					PM1Bcontrol);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	if (sleep_state > ACPI_STATE_S3) {
-		/*
-		 * We wanted to sleep > S3, but it didn't happen (by virtue of the
-		 * fact that we are still executing!)
-		 *
-		 * Wait ten seconds, then try again. This is to get S4/S5 to work on
-		 * all machines.
-		 *
-		 * We wait so long to allow chipsets that poll this reg very slowly to
-		 * still read the right value. Ideally, this block would go
-		 * away entirely.
-		 */
-		acpi_os_stall(10000000);
-
-		status = acpi_hw_register_write(ACPI_REGISTER_PM1_CONTROL,
-						sleep_enable_reg_info->
-						access_bit_mask);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/* Wait until we enter sleep state */
-
-	do {
-		status = acpi_get_register_unlocked(ACPI_BITREG_WAKE_STATUS,
-						    &in_value);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-
-		/* Spin until we wake */
-
-	} while (!in_value);
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_enter_sleep_state_s4bios
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Perform a S4 bios request.
- *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
- *
- ******************************************************************************/
-acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
-{
-	u32 in_value;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
-
-	status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	status = acpi_hw_clear_acpi_status();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * 1) Disable/Clear all GPEs
-	 * 2) Enable all wakeup GPEs
-	 */
-	status = acpi_hw_disable_all_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-	acpi_gbl_system_awake_and_running = FALSE;
-
-	status = acpi_hw_enable_all_wakeup_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	ACPI_FLUSH_CPU_CACHE();
-
-	status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
-				    (u32) acpi_gbl_FADT.S4bios_request, 8);
-
-	do {
-		acpi_os_stall(1000);
-		status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	} while (!in_value);
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_leave_sleep_state_prep
- *
- * PARAMETERS:  sleep_state         - Which sleep state we are exiting
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
- *              sleep.
- *              Called with interrupts DISABLED.
- *
- ******************************************************************************/
-acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
-{
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-	acpi_status status;
-	struct acpi_bit_register_info *sleep_type_reg_info;
-	struct acpi_bit_register_info *sleep_enable_reg_info;
-	u32 PM1Acontrol;
-	u32 PM1Bcontrol;
-
-	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
-
-	/*
-	 * Set SLP_TYPE and SLP_EN to state S0.
-	 * This is unclear from the ACPI Spec, but it is required
-	 * by some machines.
-	 */
-	status = acpi_get_sleep_type_data(ACPI_STATE_S0,
-					  &acpi_gbl_sleep_type_a,
-					  &acpi_gbl_sleep_type_b);
-	if (ACPI_SUCCESS(status)) {
-		sleep_type_reg_info =
-		    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A);
-		sleep_enable_reg_info =
-		    acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE);
-
-		/* Get current value of PM1A control */
-
-		status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
-					       &PM1Acontrol);
-		if (ACPI_SUCCESS(status)) {
-
-			/* Clear SLP_EN and SLP_TYP fields */
-
-			PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
-					 sleep_enable_reg_info->
-					 access_bit_mask);
-			PM1Bcontrol = PM1Acontrol;
-
-			/* Insert SLP_TYP bits */
-
-			PM1Acontrol |=
-			    (acpi_gbl_sleep_type_a << sleep_type_reg_info->
-			     bit_position);
-			PM1Bcontrol |=
-			    (acpi_gbl_sleep_type_b << sleep_type_reg_info->
-			     bit_position);
-
-			/* Just ignore any errors */
-
-			(void)acpi_hw_register_write(ACPI_REGISTER_PM1A_CONTROL,
-						     PM1Acontrol);
-			(void)acpi_hw_register_write(ACPI_REGISTER_PM1B_CONTROL,
-						     PM1Bcontrol);
-		}
-	}
-
-	/* Execute the _BFS method */
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
-
-	status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_leave_sleep_state
- *
- * PARAMETERS:  sleep_state         - Which sleep state we just exited
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
- *              Called with interrupts ENABLED.
- *
- ******************************************************************************/
-acpi_status acpi_leave_sleep_state(u8 sleep_state)
-{
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
-
-	/* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */
-
-	acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID;
-
-	/* Setup parameter object */
-
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-
-	/* Ignore any errors from these methods */
-
-	arg.integer.value = ACPI_SST_WAKING;
-	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
-	}
-
-	/*
-	 * GPEs must be enabled before _WAK is called as GPEs
-	 * might get fired there
-	 *
-	 * Restore the GPEs:
-	 * 1) Disable/Clear all GPEs
-	 * 2) Enable all runtime GPEs
-	 */
-	status = acpi_hw_disable_all_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-	status = acpi_hw_enable_all_runtime_gpes();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	arg.integer.value = sleep_state;
-	status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _WAK"));
-	}
-	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
-
-	/*
-	 * Some BIOSes assume that WAK_STS will be cleared on resume and use
-	 * it to determine whether the system is rebooting or resuming. Clear
-	 * it for compatibility.
-	 */
-	acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
-
-	acpi_gbl_system_awake_and_running = TRUE;
-
-	/* Enable power button */
-
-	(void)
-	    acpi_set_register(acpi_gbl_fixed_event_info
-			      [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1);
-
-	(void)
-	    acpi_set_register(acpi_gbl_fixed_event_info
-			      [ACPI_EVENT_POWER_BUTTON].status_register_id, 1);
-
-	arg.integer.value = ACPI_SST_WORKING;
-	status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _SST"));
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)