ACPI: ACPICA 20060421

Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c
index 1c5934fe185..bf88e076c3e 100644
--- a/drivers/acpi/parser/psargs.c
+++ b/drivers/acpi/parser/psargs.c
@@ -79,7 +79,7 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
 	acpi_native_uint byte_count;
 	u8 byte_zero_mask = 0x3F;	/* Default [0:5] */
 
-	ACPI_FUNCTION_TRACE("ps_get_next_package_length");
+	ACPI_FUNCTION_TRACE(ps_get_next_package_length);
 
 	/*
 	 * Byte 0 bits [6:7] contain the number of additional bytes
@@ -128,7 +128,7 @@ u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state)
 	u8 *start = parser_state->aml;
 	u32 package_length;
 
-	ACPI_FUNCTION_TRACE("ps_get_next_package_end");
+	ACPI_FUNCTION_TRACE(ps_get_next_package_end);
 
 	/* Function below updates parser_state->Aml */
 
@@ -157,7 +157,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
 	u8 *start = parser_state->aml;
 	u8 *end = parser_state->aml;
 
-	ACPI_FUNCTION_TRACE("ps_get_next_namestring");
+	ACPI_FUNCTION_TRACE(ps_get_next_namestring);
 
 	/* Point past any namestring prefix characters (backslash or carat) */
 
@@ -237,7 +237,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
 	struct acpi_namespace_node *node;
 	union acpi_generic_state scope_info;
 
-	ACPI_FUNCTION_TRACE("ps_get_next_namepath");
+	ACPI_FUNCTION_TRACE(ps_get_next_namepath);
 
 	path = acpi_ps_get_next_namestring(parser_state);
 	acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
@@ -391,7 +391,7 @@ acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 	u16 opcode;
 	u8 *aml = parser_state->aml;
 
-	ACPI_FUNCTION_TRACE_U32("ps_get_next_simple_arg", arg_type);
+	ACPI_FUNCTION_TRACE_U32(ps_get_next_simple_arg, arg_type);
 
 	switch (arg_type) {
 	case ARGP_BYTEDATA:
@@ -456,7 +456,7 @@ acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 
 	default:
 
-		ACPI_ERROR((AE_INFO, "Invalid arg_type %X", arg_type));
+		ACPI_ERROR((AE_INFO, "Invalid ArgType %X", arg_type));
 		return_VOID;
 	}
 
@@ -487,7 +487,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
 	u16 opcode;
 	u32 name;
 
-	ACPI_FUNCTION_TRACE("ps_get_next_field");
+	ACPI_FUNCTION_TRACE(ps_get_next_field);
 
 	/* Determine field type */
 
@@ -593,7 +593,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 	u32 subop;
 	acpi_status status = AE_OK;
 
-	ACPI_FUNCTION_TRACE_PTR("ps_get_next_arg", parser_state);
+	ACPI_FUNCTION_TRACE_PTR(ps_get_next_arg, parser_state);
 
 	switch (arg_type) {
 	case ARGP_BYTEDATA:
@@ -718,7 +718,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 
 	default:
 
-		ACPI_ERROR((AE_INFO, "Invalid arg_type: %X", arg_type));
+		ACPI_ERROR((AE_INFO, "Invalid ArgType: %X", arg_type));
 		status = AE_AML_OPERAND_TYPE;
 		break;
 	}